hexkey redesign
TRANSCRIPT
1
HEXKEY REDESIGN
DD 311 – Applied ErgonomicsGUIDE – Prof. Dr. Sougata Karmakar
120205023 | 120205044
Lolla Sruzan Vishram Meena
Hex key/Allen key
The hex socket screw drive has a hexagonal recess
and may be driven by a hex wrench, also known as
an Allen Wrench, Allen key, hex key or inbus as well
as by a hex screwdriver (also known as a hex driver)
or bit.
2
Hex Socket
Nomenclature
The term "hex key" has various synonyms. Some are explained by the
geographical and commercial history of the drive type's development:
Allen, Hex, Unbrako, Zeta and Inbus key or wrench.
Allen – Named after publisher Allen Manufacturing Company
Hex - Geometrical shape(Hexagonal)
Zeta - refers to the sixth letter of the Greek alphabet
3
Hex key standard sizes
Hex keys are measured across-flats (AF), which is the distance between
two opposite (parallel) flat sides of the key.
Standard metric sizes measured in millimetres(mm) are
0.7, 0.9, 1.0, 1.25, 1.3, 1.5
2 to 6 in 0.5 mm increments
7 to 22 in 1 mm increments
24, 25, 27, 30, 32, 36, 42 and 46 mm.
4
Features
The tool is simple, small and light
The contact surfaces of the screw or bolt are protected from external damage
The tool can be used with a headless screw
The screw can be inserted into its hole using the key
Torque is constrained by the length and thickness of the key
The tool can be manufactured very cheaply
5
Types
L-shaped Hexkey
T-shaped Hexkey
The L-shaped are formed from hexagonal wire stock, while the T-handles are the same hex
wire stock with a metal or plastic handle attached to the end.
6
Manufacturing
Hex socket screw heads are usually made by stamping the head with a
die, plasticly deforming the metal.
Other ways – Linear Broaching and Rotary Broaching
Broaching - a hole is drilled and then the corners are broached out.
Hex keys are made by imparting the hexagon cross-section to steel wire
(for example, with a die), then bending and shearing.
7
Applications – Present Scenario
Hex keys are used with automotive, plumbing and electrical applications. They’re
designed to provide 360° rotation at angles up to 35°.
Hex keys with T-shaped handles can provide increased turning power and more
comfortable grips.
Non-sparking, non-magnetic Allen wrenches can be useful in hazardous environments.
8
Aim and Objectives
The use of hand tools frequently leads to feelings of discomfort during work.
These feelings of discomfort can reduce efficiency and job satisfaction of
workers.
Thus, our research is concentrated on the areas of improving grip, safety and
comfort to the selected hand tool.
Ease of repetition
Grip
Space
10
User survey findings
The existing hex keys are mainly focused on efficiency.
Repetitive motion leads to wrist pain/discomfort.
Grip of the tool is also not much comfortable.
Also the existing hex keys have only single uses (to open hexagonal socket screws).
To maintain equilibrium of the handle within the hand, the gripping force must be
sufficient to counteract the reactive moments or forces.
13
Final Design
Hollow hexkeys are designed to open both socket screws and
screws with hexagonal head.
These hollow hexkeys can be joined together to attain grip and
provide ease of repeated motion.
Combinations can be varied depending on the space that is
available.
Combinations : Short – Short
Long – Long
Short – Long
15
Discussion
Joining of hexkeys is completely user’s choice. Since by default they are not joined, this feature is in doubt.
Instruction is needed while using the product for the first time
19
Evaluation
20
Existing
Redesign
0
0.5
1
1.5
2
2.5
3
3.5
4
Grip Usability
(ease)
Space
Effective
Efficiency
(Time)
2
1
4
3
4
2 2
4
References
1. Fraser, T.M. 1980 Ergonomics principles in the design of handtools. Occupational Safety and Health Series, No 44 Geneva, Switzerland International Labour Office.
2. Aghazadeh, F., Mital, A., 1987. Injuries due to hand tools; results of a questionnaire. Appl. Ergon. 18 (4), 273–278.
3. Fellows, G.L., Freivalds, A., 1991. Ergonomics evaluation of a foam rubber grip for tool handles. Appl. Ergon. 22 (4), 225–230.
4. Kadefors, R., Areskoug, A., Dahlman, S., Kilbom, A., Sperling, L., Wikstrom, L., Oster, J., 1993. An approach to ergonomics evaluation of hand tools. Appl. Ergon. 24 (3), 203}211.
5. Freivalds, A., 1996. Tool evaluation and design. In: Bhattacharya, A., McGlothlin, J.D. (Eds.), Occupational Ergonomics: Theory and Applications. Marcel Dekker, New York, pp. 311}317.
6. Westling, G., Johansson, R.S., 1984. Factors infuencing the force control during precision grip. Exp. Brain. Res. 53 (2), 277}284.
7. Lowe, B.D., Freivalds, A., 1999. E!ect of carpal tunnel syndrome on grip force coordination on hand tools. Ergonomics 42 (4), 550}564.
8. Wikipedia, Wikimedia foundation - Available from: http://en.wikipedia.org/wiki/Hex_key [Accessed 2 January 2015]
22