high performance high precision cnc lathe · high performance high precision cnc lathe ... the...
TRANSCRIPT
EVEV
5M1E003-00
14001
認可登錄
A remote monitoring systemRemote Monitoring System
012011-E05-2000
HIGH PERFORMANCE HIGH PRECISION CNC LATHE
11
Modular spindle design is for various turning applications. ■The rigid one-piece MEEHANITE ■ ® castings absorb the turning vibration and ensure job accuracy.
The fast and reliable servo driven turret features fast indexing for high production. ■High speed axial traverse design achieves precise positioning which enlarges the ■benefit of operation.
The user-friendly interface provides the users a easy way to operate and maintain. ■The full enclosure safely guards the operator, conforms current environmental ■safety regulations.
High Performance High Precision CNC LatheYCM TC series is the utmost performance CNC lathe which provides the best solution in various complex machining. With numerous outstanding features, the TC series is suited for mass turning production, such as automotive, aerospace, oil, and IT electronic industries.
■ Making a perfect surface is the foundation for the achievement of geometrical accuracy.
■ How to make a perfect surface:
We need three flat blocks first and then test each surface by touching it with other surfaces. Scrape the bumpy points on the surface until every surface is 100% touching with each other.
Smooth˙Straight˙Perfect
2
YCM Sophisticated Scraper Work SkillScraper Work Skill is viewed as one of the core skills in machine tool industry. Making a perfect surface is the foundation of flawless accuracy and YCM utilizes this hand-made skill to achieve it.
To keep the sophisticated scraper work skill, YCM has created a series of training programs for her employees. YCM seriously demands that all of her technicians are capable of making a perfect surface with 20 spot per square inch, 40% contact rate.
333
■ Max. Spindle Speed: 4,000rpm■ X/Z Rapid Feedrate: 15/20 m/min. 591/787ipm■ Extremely Rigid One-piece 45° Slanted Bed Design ■ Powerful Gearhead Spindle with Max. Torque Output at 74.5kgf-m 539 lb-ft.■ Material Removal Efficiency: 410cm3/min. Insert Depth: 8mm 0.31"
High Speed High Rigidity Turret■ The 12-station turret index is done by absolute detection to reduce tool selection mistake.■ The powerful turret with large diameter curvic coupling offers high precision and high rigidity in cutting performance.
Powerful Headstock With Built-in Gears■ The spindle is equipped with high precision angular ball bearing and NN series bearing that provides high precision and rigidity working condition. ■ The inner diameter of the bearing is ø120mm ø4.72", and ø88mm ø3.46" of the spindle through hole. ø78mm ø3.07" of the drawbar through hole adapts large diameter bar stock jobs. ■ The powerful spindle with built-in gears provides various speed transmissions. The max. output of torque reaches 74.5kgf-m 539 lb-ft, with 4,000rpm max. spindle speed.
14.5 10510.64 77
74.58 53954.69 396
kgf-m Ib-ft
Torque
kW HP
15 2011 15
Power
36.17
14.47
5
2
8 195
SPINDLE SPEED (rpm)
783 1,007
30min. (High)cont. (High)
4,000
30min. (Low)cont. (Low)
30min. (Low)cont. (Low)
30min. (High)cont. (High)
Spindle Power-Torque Output ChartTORQUEPOWER
ø78
ø88
ø120
ø3.0
7"
ø3.4
6"
ø4.7
2"
44
High Precision and High Rigidity Programmable TailstockUsing "M" code commands the quill stroke of the programmable tailstock can be hooked with a hydraulic hook to the saddle carriage and slide along the Z-axis stroke.
High Speed Ultra Smooth Axial MovementX/Z-axis guideways are well hardened and ground with Turcite-B to reduce the friction and offer utmost rigidity in cutting. The rapid feedrate of X/Z-axis is 15/20 m/min. 591/787ipm
User-friendly Operation and Easy MaintenanceHydraulic gauges, control values of chuck and tail stock, and the central lubrication system are installed at the front side; for easy adjustment and maintenance.
Directly Driven Ballscrews Of High Precision And RigidityThis machine is equipped with high precision ball screws and connected with motor directly. The fixing design supports both ends; the design of pre-tensioned ball screws provides high rigidity, high precision, and low heat effect.
Central Lubrication System■ The machine with auto-lubrication design ensures the accuracy throughout its life time. ■ The slide ways of X/Z-axis and ball screws are lubricated. Built-in alarm will occurred when the lubrication oil is insufficient.
TC-26/26L 4,000rpm CUTTING TESTSS650 SteelDrilling
Max. Drilling Capacity: 59mm 2.32"Cutting speed 120m/min.
4,724ipm Feedrate 0.15mm/rev
Spindle speed 650rpm Metal removal rate 266cm3/min.
S45C SteelTurning - external
Depth of cut 8mm 0.31"Cutting speed 128m/min.
5,039ipm Feedrate 0.4mm/rev
Spindle speed 200rpm Metal removal rate 410cm3/min.
8mm (0.31")
5
ø78
ø88
ø120
TC26
TC36
ø150
ø105
ø93
55
■ Extremely Rigid One-piece 45° Slanted Bed Endures Max. Cutting Force, with Easy Operation.■ Powerful Gearhand Spindle with Max. Torque Output at 140kgf-m 1,013 lb-ft, and Power Outputs at 26kW 35HP.
High Speed High Rigidity Turret■ The 12-station turret index is done by absolute detection, and no tool selection mistake is caused.■ The powerful turret of large diameter curvic coupling offers high precision and high rigidity in cutting performance.
Powerful Headstock With Built-in Gears■ The spindle is equipped with high precision angular ball bearing and NN series bearing witch provides high precision and rigidity working condition.■ The inner diameter of the bearing is ø150mm ø5.91", and ø105mm ø4.13" of the spindle through hole. ø93mm ø3.66" of the drawbar through hole adapts large diameter bar stock jobs. ■ The powerful spindle with built-in gears provides various speed transmissions. The max. output of torque reaches 140kgf-m 1,013 lb-ft, with max. spindle speed of 2,500rpm.
TC-36/36W 2,500rpm CUTTING TESTSS650 SteelDrilling
Max. Drilling Capacity: 59mm 2.32"Cutting speed 120m/min.
4,724ipm Feedrate 0.15mm/rev
Spindle speed 650rpm Metal removal rate 266cm3/min.
S45C SteelTurning - external
Depth of cut 8mm 0.31"Cutting speed 128m/min.
5,039ipm Feedrate 0.4mm/rev
Spindle speed 200rpm Metal removal rate 410cm3/min.
8mm (0.31")
66
Directly Driven Ballscrews Provides High Precision and RigidityThis machine is equipped with high precision ball screws and connected with motor directly. The fixing design supports both ends; the design of pre-tensioned ball screws provides high rigidity, high precision, and low heat effect.
The Stand Alone Oil Tank Reduces Heat DeformationThe stand alone oil tank ensures the machining precision will not be affected by heat. It is also convenient and efficient for cleaning and maintaining the oil tank.
User-friendly Operation and Easy MaintenanceHydraulic gauges, control values of chuck and tail stock, and the central lubrication system are located at the front side for easy operation and maintenance.
High Precision and High Rigidity Programmable TailstockUsing "M" code commands the quill stroke of the programmable tailstock can be hooked with a hydraulic hook to the saddle carriage and slide along the Z-axis stroke. Tailstock with live quill is standard.
Environments Concerned Safety GuardingFrom the window of the safety guard, operator can see through the engaged job, and shield from the cutting chips and coolant mist.
TORQUEPOWER
33.728.5
10
119140.8 1,018
861
244206
72
kgf-m lb-ftTorque
HP
3035
kW
2226
Power
8 179 719751
2,500
SPINDLE SPEED (rpm)
cont. (High)30min. (Low )
cont. (Low ) 30min. (High)
cont. (Low )
30min. (Low)
30min. (High)
cont. (High)
Spindle Power-Torque Output Chart
7
○ 25mm, 1”
○ 25mm, 1”
○ø20, ø3/4”○ø16, ø5/8”
●ø32, ø1 1/4” -1●ø25, ø1” -1
●ø50mm, ø2” -1
●ø40mm, ø1 1/2” -1
○MT1
○MT4
○MT2●MT3-1
●ø32, ø1 1/4 -2
●ø8, ø5/16” -1●ø10, ø3/8” -1
●ø25, ø1” -2
●ø12, ø1/2” -1●ø16, ø5/8” -1●ø20, ø3/4” -1
ø40mm, ø1 1/2”
< ø40mm, < ø1 1/2”
● M T 4 - 1
< ø40mm, < ø1 1/2”
ø40mm, ø1 1/2”
●ø40mm, ø1 1/2” -5
25mm, 1” -12●
25mm, 1” -2●
25mm, 1” -2●
Boring Tool
Drill
Boring Tool
Drill
Throw away drill
Throw away drill
I.D. and Face Tooling
O.D. and Face Tooling
Boring bar sleeve
Drill socket
Drill socket
Boring bar sleeve Boring bar holder
Boring bar holder
Boring bar holder
Face and I.D. holder
Gib
Gib
12 Station Turret Head
TURRET ACCESSORIES
● : Standard
○ : Optional
8
TC-26/TC-26L
15 0
.59
956 / 1,356 37.64 / 53.39
120 4.72 125 (124)4.92 (4.88)
44 (54)1.73 (2.13)
50 1.97
84.83.34
1244.88
1254.92
77 3.03
35 0.387 0.28
ø254
(ø30
5)ø1
0.00（
ø12.0
1）
X-ax
is St
roke
25
0 9.8
4
180 7.09Max. Tool Length
Z Axis Stroke700 / 1,100 27.56 / 43.31
Tail Stock Quill Stroke Tail Stock Base Stroke530 / 930 20.87 / 36.61
Max. Turning Length647 / 1,047 25.47 / 41.22 (638 / 1,038 25.12 / 40.87)
ø260 ø10.24 (Facing Tool Interference with ø40 ø1.57 Boring Tool)
250 9.84 Stroke
250 9.84 Stroke
250 9.84 Stroke
ø40 ø1.57ø640 ø25.20 (Max. Turret Swing)
ø251 ø9.88 (Facing Tool Interference with ø50 ø1.97 Sleeve)
57 2.24
ø231 ø9.09 (O.D. Tool Interference with ø50 ø1.97 Sleeve)ø241 ø9.49 (O.D. Tool Interference with ø40 ø1.57 Boring Tool)77
3.03
ø40 ø1.5
7
ø50 ø1.97
75 2.95
25 0
.98
351.38
ø470 ø18.50 (Max. Turning Dia)
ø305 ø12.01 (12" Chuck Dia)
ø254 ø10.00 (10" Chuck Dia)501.97
ø50
ø1.
97
30 1.18
510 20.08270 10.63225 8.86 15 0.59
Unit : mm inch:Spindle Center
TOOL INTERFERENCE & WORKING CAPACITY
TC-36W/TC-36
ø251 ø9.88 (Facing Tool Interference with ø50 ø1.97 Sleeve)
ø260 ø10.24 (Facing Tool Interference with ø40 ø1.57 Boring Tool)
310 12.20 Stroke
ø50 ø1.97ø40
ø1.57
25 0
.98
310 12.20 Stroke
310 12.20 Stroke
ø640 ø25.20 (Max. Turret Swing)
501.97
ø50
ø1.
97
ø40 ø1.57
15 0.59
330 12.99570 22.44
225 8.86
57 2.24
ø241 ø9.49(Facing Tool Interference with ø40 ø1.57 Boring Tool)
ø231 ø9.09(Facing Tool Interference with ø50 ø1.97 Sleeve)
75 2
.95
351.38
77
3.03
30 1.18
ø305 ø12.01 (12” Chuck Dia)
ø590 ø23.23 (Max. Turning Dia)
87 / 1243.43 / 4.88
Z-axis Stroke700 / 1,250 27.56 / 49.21
120.8 4.76
50 1.97
230 9.05
ø305
ø12
.01
905 / 1,492 35.63 / 58.7454 2.13124 4.88
15 0.59
602.36
77 3.03
7 0.28
35 1.38
310
12.2
0X-
axis
Stro
ke
Max. Tool Length
Max. Turning Lengtha602 / 1,189 23.70 / 46.81
120 4.72 Tail Stock Quill Stroke Tail Stock Base Stroke
530 / 1,080 20.87 / 42.52
9
MACHINE DIMENSIONS
A B C D E F GH
(2nd Door)
I J K L M N P
TC-26 3,250127.95"
1,78670.31"
1,84172.48"
73028.74"
1,02940.51"
1,01039.76"
1,06041.73" - 185
7.28"575
22.64"654
25.75"900
35.43"1,09042.91"
90035.43"
36514.37"
TC-26L 3,690145.28"
1,78670.31"
1,86173.27"
73028.74"
1,02940.51"
1,12544.29"
1,06041.73"
78030.71"
1857.28"
57522.64"
65425.75"
90035.43"
1,11343.82"
90035.43"
36514.37"
TC-36W 3,390133.46"
1,99378.46"
2,01179.17"
71027.95"
1,02940.51"
1,09543.11"
1,06041.73" - 206
8.11"556
21.89"663
26.10"900
35.43"1,11743.98"
96037.8"
43517.13"
TC-36 3,936154.96"
2,09382.40"
2,01179.17"
76029.92"
1,02940.51"
1,09543.11"
1,06041.73"
84033.07"
2068.11"
57222.52"
66326.10"
90035.43"
1,11743.98"
96037.8"
43517.13"
H (TC-26L/TC-36)GF
E
DA
C
L
J
B
M
I
K
N
P
Unit : mm inch:Spindle Center
10
H (TC-26L/TC-36)GF
E
DA
C
L
J
B
M
I
K
N
P
Heat Exchanger for electrical cabinet ■
SPECIFICATIONS
MACHINING CAPACITYSwing Over Bed ø500mm ø19.69" ø690mm ø27.17"
Swing Over Carriage ø350mm ø13.78" ø510mm ø20.08"
Max. Turning Diameter ø470mm ø18.50" ø590mm ø23.23"
Max. Turning Length (opt.) 647mm (638mm)25.47" (25.12")
1,047mm (1,038mm)41.22" (40.87")
602mm23.70"
1,189mm46.81"
Distance Between Center 956mm 37.64" 1,356mm 53.39" 905mm 35.63" 1,492mm 58.74"
SPINDLEChuck Size (opt.) 10" (12") 12"
Spindle Nose A2-8
Hole Through spindle ø88mm ø3.46" ø105mm ø4.13"
Hole Through draw bar ø78mm ø3.07" ø93mm ø3.66"
Spindle Speed (opt.) 4,000rpm (2,500rpm, 2 Speed Gearhead Spindle) 2,500rpm, 2 Speed Gearhead Spindle
Spindle Motor (cont./30min.) 11/15kW 15/20HP 22/26kW 30/35HP
TRAVELX-axis Travel 250mm 9.84" 310mm 12.20"
Z-axis Travel 700mm 27.56" 1,100mm 43.31" 700mm 27.56" 1,250mm 49.21"
FEEDRATERapid Feedrate (X/Z) 15/20m/min. 591/787ipm
Cutting Feedrate 1~5,000mm/min. 0.04~197ipm
TURRETTurret Type Servo Motor Drive (Hydraulic Clamp)
Turret Capacity (opt.) 12T (8T)
Shank Height for Square Tool □ 25mm 1"Shank Diameter for Boring Bar
ø40/ø50mm ø1½" / ø2"
TAILSTOCKTailstock Quill Taper (std.) MT-5 (Stationary Type) MT-4 (Live Type)
Tailstock Quill Taper (opt.) MT-4 (Live Type) — —
Tailstock Quill Diameter ø100mm ø3.94"
Tailstock Quill Stroke 120mm 4.72"
Tailstock Stroke 530mm 20.87" 930mm 36.61" 530mm 20.87" 1,080mm 42.52"
GENERALPower Consumption (Transformer)
30kVA (30kVA) 51kVA (65kVA)
Machine Weight 4,400kg 9,700 lb 5,500kg 12,125 lb 5,450kg 12,015 lb 7,000kg 15,432 lb
*We reserve the right to modify and improve our products.
ACCESSORIES
Hydraulic System ■Central Lubrication system ■ Tool Length Measurement ■ System (opt.)
Chip Conveyor ■
TC-26 TC-26L TC-36W TC-36Tool Kit ● ● ● ●Work Lamp ● ● ● ●Pilot Lamp ● ● ● ●Automatic Door ○ ○ ○ ○Safety Door ● ● ● ●Hydraulic System ● ● ● ●General Tool Holder ● ● ● ●VDI Tool Holder ○ ○ ○ ○Hydraulic Hollow Chuck ● ● ● ●Hard and Soft Jaws 1 Set ● ● ● ●Additional hard and Soft Jaws ○ ○ ○ ○Soft Jaw Former ○ ○ ○ ○Collet Chuck ○ ○ ― ―Padel for Main Spindle ● ● ● ●Padel for Tailstock ○ ○ ○ ○Programmable Tailstock ● ● ● ●Tailstock Quill Taper
Stationary Type ● ● ― ―Live Type ○ ○ ● ●
Full Chip Enclosure ● ● ● ●Leveling Blocks and Bolts ● ● ● ●Foundation Screw Bolt ○ ○ ○ ○Air Gun ● ● ● ●Cutting Air Blast ○ ○ ○ ○
Coolant EquipmentSystem MTH2-30/3 ● ● ● ●System MTH2-40/4 ○ ○ ○ ○System MTR3-17/17 ★ ★ ○ ○
Coolant Gun ○ ○ ○ ○Oil Skimmer ○ ○ ○ ○Paper Filter ○ ○ ○ ○Coolant Shower System ○ ○ ○ ○Oil-mist Collector ○ ○ ○ ○Central Lubrication System ● ● ● ●Right Side Chip Conveyor ● ● ● ●Heat Exchanger for Electrical Cabinet ● ● ● ●A/C. Cooler for Electrical Cabinet ○ ○ ○ ○Workpiece Length Setter ○ ○ ○ ○Auto Tool Length Measurement System for Main Spindle ○ ○ ○ ○Bar Feeder ○ ○ ― ―Parts Catcher for Main Spindle ○ ○ ― ―Feeder Safety Clutch ○ ○ ○ ○Feeder Safety Clutch ● ● ● ●Transfer System ○ ○ ― ―CNC Control
TXP-100FA ● ● ● ●TXP-200FA ○ ○ ○ ○
Mechanical Electrical & Operating Manuals ● ● ● ●Steady Rest Manual ○ ○ ○ ○Steady Rest Hydraulic ○ ○ ○ ○★ Special options, please consult with sales representatives.
●: Standard ○: Optional —: None ★: Special
12
Controlled axisItem Specifications TXP-100FA TXP-200FA
Controlled axis 2 axes ● ●
Simultaneously controlled axis 4 axes ● ●
Axis name X / Y / Z / U / V / W / A / B / C ● ●
Inch / Metric conversion G21 / G20 ● ●
Least input increment 0.001mm / 0.0001inch / 0.001deg ● ●
Increment system 1/10 0.0001mm / 0.00001inch / 0.0001deg ● ●
Fine Acc & Dec control ● ●
Follow-up ● ●
Inter lock All axes / each axis / cutting block start ● ●
Machine lock All axes / each axis ● ●
Emergency stop ● ●
Overtravel ● ●
Stored stroke check 1 ● ●
Position switch ● ●
Backlash compensation Rapid traverse / cutting feed ● ●
Stored pitch error compensation ● ●
Chamfering on/off M22 / M23 ● ●
M-Code mirror image M94 / M95 / M96 ● ●
HRV controlHRV2 ● ●
HRV3 ● ●
Controlled axis expansion (total) Max. 4 axes ○ ○
Simultaneously controlled axis expansion (total) Max. 4 axes ○ ○
OperationItem Specifications TXP-100FA TXP-200FA
Automatic operation ● ●
DNC operation Reader / Puncher interface is required ● ●
Dry run ● ●
Buffer register ● ●
Single block ● ●
MDI operation MDI-B ● ●
JOG feed ● ●
Manual reference position return ● ●
Manual absolute on and off ● ●
Manual handle feed rate X1 / X10 / X100 ● ●
Program number search ● ●
Sequence number search ● ●
Manual handle feed1 unit / each path ● ●
2 units ○ ○
Manual handle interruption Hardware is necessary ● ●
Sequence number comparison and stop ● ●
Program restart Hardware is necessary ● ●
InterpolationItem Specifications TXP-100FA TXP-200FA
Positioning G00 ● ●
Dwell G04 ● ●
Linear interpolation G01 ● ●
Circular interpolation G02 / G03 ● ●
Thread, synchronous cutting G33 ● ●
Skip function G31 ● ●
Reference position return G28 ● ●
Reference position return check G27 ● ●
2nd reference position return ● ●
Threading retract ● ●
Continuous threading G32 ● ●
Variable lead threading G34 ● ●
Cylindrical interpolation ● ●
Polar coordinate interpolation G12.1 / G13.1 ● ●
3rd / 4th Reference position return G30 ● ●
Conversational programming functionItem Specifications TXP-100FA TXP-200FA
Manual Guide i 10.4”LCD / MDI is necessary — ●
Tool function / Tool compensationItem Specifications TXP-100FA TXP-200FA
Tool function T7+1 digit / T6+2 digit ● ●
Tool offset pairs 64 pairs ● ●
Tool nose radius compensation ● ●
Tool geometry / wear compensation ● ●
Tool offset value counter input ● ●
Automatic tool offestG36 / G37(Touch sencer and Macro B are necessary)
○ ○
Tool life management function ● ●
Feed functionItem Specifications TXP-100FA TXP-200FA
Rapid traverse rate ● ●
Rapid traverse override F0, 25%, 50%, 100% ● ●
Feed per minute G94 (mm/min) ● ●
Feedrate override 0~200% ● ●
JOG override 0~200% ● ●
Feed per revolution (mm/rev) G95, A spindle position coder is required ● ●
Manual per revolution feed ● ●
Feed stop ● ●
Tangential speed constant control ● ●
Cutting feedrate clamp ● ●
Automatic acceleration / deceleration ● ●
Rapid traverse bell-shaped acceleration / deceleration ● ●
Linear acceleration / deceleration after cutting feed interpolation
● ●
External deceleration ● ●
Program inputItem Specifications TXP-100FA TXP-200FAEIA / ISO automatic recognition ● ●
Label skin ● ●
Parity check ● ●
Control in / out ● ●
Max. programmable dimension ± 8 - digit ● ●
Program number O4 - digit ● ●
Sequence number N5 - digit ● ●
Absolute / Incremental programming ● ●
Diameter / radius programming ● ●
Direct drawing dimension programming ● ●
Decimal point programming / poket calculator type decimal point programming
● ●
Input unit 10 time multiply ● ●
Plane selection G17 / G18 / G19 ● ●
Rotary axis designation ● ●
Rotary axis roll-over function ● ●
Sub program call 4 folds nested ● ●
Program stop / program end M00 / M01 / M02 / M30 ● ●
Reset ● ●
G-Code A system ● ●
Canned cycles G70~G76 ● ●
Coordinate system setting ● ●
Automatic coordinate system setting ● ●
Coordinate system shift ● ●
Direct input of Coordinate system ● ●
Workpiece coordinate system preset ● ●
Chamfering / corner R ● ●
Programmable data input G10 ● ●
Custom macro B Macro B ● ●
Optional block skip1, Hardware is necessary ● ●
9, Hardware is necessary ○ ○
Canned cycles for drilling G80~G89 ● ●
Program format FS10 / 11 Word and address format ● ●
G-Code B / C system ● ●
Workpiece coordinate system
G52 / G53 ○ ○
G54~G59 ○ ○
Addition of custom macro common variables #100~#199 / #500~#999 ● ●
Edit operationItem Specifications TXP-100FA TXP-200FA
Number of registerable programs 400 ● ●
Part program editing ● ●
Extended part program editing ● ●
Background editing ● ●
Program protect ● ●
Part program storage length 640M (256kbyte) ● ●
Playback Hardware is necessary ● ●
Data input / outputItem Specifications TXP-100FA TXP-200FA
Reader / Puncher interfacer RS-232 interface ● ●
Memory card interfaceFor maintenance ● ●
For customer ● ●
External message ● ●
Data Server-ATA Slot unit is necessary Standard 128MB, MAX.2 GB ○ ○
Setting / DisplayItem Specifications TXP-100FA TXP-200FA
Status display ● ●
Current position display ● ●
Program display Program name 31 characters ● ●
Parameter setting and display ● ●
Alarm display ● ●
Alarm history display ● ●
Operation history display ● ●
Run hour and parts count display
Included Machining time stamp ● ●
Actual cutting feedrate display ● ●
Display of spindle speed and T code at all screens ● ●
Display of hardware and software configuration ● ●
Graphic function Graphic display unit is necessary ● ●
Dynamic graphic display Graphic function is necessary ● ●
Help function ● ●
Clock function ● ●
Data protection key ● ●
Erase CRT screen display ● ●
Servo setting screen ● ●
Spindle setting screen ● ●
Periodic maintenance screen ● ●
Maintenance information screen ● ●
Multi-language display
English, Chinese ● ●
French, German, Italian, Korean, Spanish, Japanese, Portuguese, Czech, Polish, Hungarian
● ●
Operation message history display ● ●
Auxiliary / Spindle speed functionItem Specifications TXP-100FA TXP-200FA
Auxiliary function (M) M8 digit ● ●
High speed M / S / T interface ● ●
Spindle speed function (S) ● ●
Spindle override 50~200% ● ●
Spindle positioning ● ●
1st spindle orientation M19 ● ●
Rigid tapping M29 ● ●
Spindle speed fluctuation detection function ● ●
Cutting air blast M14 / M15 ○ ○
Auto power off M30 ○ ○
OthersItem Specifications TXP-100FA TXP-200FA
Status output signal ● ●
Connectable servo motor ● ●
Connectable servo AMP ● ●
Connectable spindle motor ● ●
Connectable spindle AMP ● ●
8.4”color LCD / MDI (full key) Separate type ● —
10.4”color LCD / MDI (full key) Separate type — ●
*We reverse the right to make any modification without notice.
The ATA FLASH memory card interface is standard. The huge volume of programs and production data can be carried by flash memory card (option) for high-speed data transmission, and monitoring the machining execution.
Control Functions and Specifications●: Standard ○: Optional —: None