high-performance plastics for healthcare
TRANSCRIPT
SPECIALTYPOLYMERS
High-Performance Plastics for
Healthcare
Discover More Plastics with More Performance
High-Performance Medical Grade Plastics
Radel® PPSU
Udel® PSU
Ixef® PARA
AvaSpire® PAEK
KetaSpire® PEEK
PrimoSpire® SRP
Solviva® Biomaterials for Implantable Devices
Zeniva® PEEK
Veriva® PPSU
Eviva® PSU
Proniva® SRP
High-Performance Plastics for Healthcare / 1
Solvay offers the industry’s broadest selection of high-performance thermoplastics for implantable and non-implantable medical devices. We also provide global technical and regulatory support. With over 25 years of experience as a leading materials supplier to the healthcare industry, Solvay provides the commitment, experience and innovation that medical device manufacturers need from their partners.
Based on biocompatibility testing as defined by ISO 10993 :1, our healthcare products demonstrate no evidence of cytotoxicity, sensitization, intracutaneous reactivity or acute systemic toxicity. Compatibility with various sterilization methods is product specific and includes gamma radiation, ethylene oxide, vaporized hydrogen peroxide and steam.
High-Performance Medical Grade PlasticsPerformance requirements for medical equipment, cases and trays, surgical instrumentation and other non-implantable medical devices vary widely, but they share a common need for the high performance that Solvay’s medical grade plastics provide. These materials are suitable for limited exposure applications that are in contact with bodily fluids or tissue for less than 24 hours.
• Reusable and single-use devices
• Compatible with cleaning agents and disinfectants
• Transparent, opaque and gamma-stabilized colors
• FDA Master Access File ( MAF ) supported color palettes
• Silicon overmolding for ergonomic designs
• Enable metal-to-plastic conversion
Solviva® Biomaterials for Implantable DevicesSolviva® Biomaterials are offered for use in implantable medical devices, specifically those that are in contact with bodily fluids or tissue for more than 24 hours. Our dedicated production facility in Georgia, USA, is ISO 13485 compliant and operates under the relevant aspects of current Good Manufacturing Practices. All materials are tested in accredited laboratories that have ISO 9001 certification and are ISO 17025 accredited.
• Over fifty 510 ( k ) clearances and numerous CE marks
• Meet ASTM F2026-2014 (PEEK only) and YY/T 0660-2008
• Streamlined contract negotiations
• Ship directly to processors
• Process validation
• Product traceability
2 \ High-Performance Plastics for Healthcare
More Plastics with More Performance High-Performance Medical Grade Plastics Radel® PPSU polyphenylsulfone Super-tough, high-heat, transparent plastic that has excellent chemical resistance and the ability to withstand more than 1,000 cycles of steam sterilization without significant loss of properties. Opaque and transparent colors are available.
Udel® PSU polysulfone Tough, high-strength transparent plastic that offers higher heat resistance and better hydrolytic stability than polycarbonate. PSU retains mechanical properties and dimensional stability when exposed to steam and oxidizing agents. Opaque and transparent colors are available.
Ixef® PARA polyarylamide Uniquely combines high strength and stiffness with an exceptional surface finish, making it an excellent candidate for metal replacement. Opaque gamma-stabilized colors are available.
AvaSpire® PAEK polyaryletherketone Versatile family of products which bridges the gap between sulfone and ketone based polymers. Benefits include improved aesthetics and ductility versus traditional PEEK materials.
KetaSpire® PEEK polyetheretherketone PEEK is one of the industry’s highest performing polymers and it retains its excellent mechanical and chemical resistance properties at high temperatures. Glass fiber and carbon fiber-reinforced grades provide a wide range of performance options.
PrimoSpire® SRP self-reinforced polyphenylene One of the stiffest, strongest unreinforced thermoplastics available, offering exceptional hardness, high compressive strength and excellent dimensional stability after repeated steam sterilization.
Solviva® BiomaterialsSolvay’s family of thermoplastic biomaterials are offered for use in implantable medical devices for short-term and long-term exposure. Only products designated as part of the Solviva® family of biomaterials may be considered as candidates for medical applications implanted in the human body and devices that are in contact with bodily fluids or tissues for greater than 24 hours.
Zeniva® PEEK polyetheretherketonePEEK is one of the most biostable plastics available and it exhibits high strength and stiffness along with excellent toughness and fatigue resistance. This material meets ASTM F2026 -2014 requirements as a PEEK polymer for surgical implant applications.
Proniva® SRP self-reinforced polyphenylene Among the world’s stiffest and strongest unreinforced plastics, offering exceptional biocompatibility and hardness.
Veriva® PPSU polyphenylsulfoneCombines unsurpassed toughness with transparency and excellent biocompatibility.
Eviva® PSU polysulfoneTransparent, biocompatible polymer that offers high strength and toughness.
Technical & Regulatory SupportAt Solvay, we understand the importance of responsive customer support and work hard to earn your confidence in us as a materials supplier. Our dedicated healthcare team provides the product development, technical and regulatory support you need to grow your global business. Please contact us for assistance with:
• Material recommendations
• Designing with plastics
• Moldflow® process modeling
• Finite element analysis
• Fabrication and assembly techniques
• Product testing
• Failure analysis
• Global regulatory submission assistance
High-Performance Plastics for Healthcare / 3
Typical Applications
Orthopedics
Sterilization Cases &
Trays
Medical & Dental
DevicesSingle-UseInstruments
Hemodialysis Membranes
Implantable Devices
High-Performance Medical Grade Plastics
Radel® PPSU √ √ √
Udel® PSU √ √ √ √
Ixef® PARA √ √ √
AvaSpire® PAEK √ √
KetaSpire® PEEK √ √
PrimoSpire® SRP √ √
Solviva® Biomaterials
Zeniva® PEEK √
Proniva® SRP √
Veriva® PPSU √
Eviva® PSU √
These categories represent areas where Solvay healthcare plastics are commonly used and do not imply fitness for use.
Comparison of stiffness-to-weight ratios Tensile modulus / density
Specific tensile modulus [106 N-m / kg]
0 10
Cortical bone
5 15 20 25
Zeniva® PEEK
Stainless steel 316L
Titanium alloy Ti6AI4V
Cobalt chrome alloy
4 \ High-Performance Plastics for Healthcare
Biological SafetyAs a proactive partner with healthcare OEM’s for more than 25 years, we understand the stringent industry requirements designed to ensure biological safety and protect the public’s health, and we offer comprehensive regulatory support.
• Global standardization based on ISO 10993 methods
• Robust data dossiers, including FDA Master Access Files (MAFs) for materials used in long-term implantable and limited body contact applications
• Region-specific regulatory specialists can assist and support your submissions, petitions, and certificate requests
Biocompatibility testing
Test MethodZeniva® PEEK
Veriva® PPSU Eviva® PSU
AvaSpire® PAEK KetaSpire® PEEK
Radel® PPSU Udel® PSU
Ixef® PARA
Complete characterization* ISO 10993-18 √ √
Physico-chemical ISO 10993-18 √ √ √
Cytotoxicity ISO 10993-5 √ √ √ √ √
Sensitization ISO 10993-10 √ √ √ √ √
Intracutaneous toxicity ISO 10993-10 √ √ √ √ √
Acute systemic toxicity ISO 10993-11 √ √ √ √ √
Subchronic toxicity ISO 10993-11 √ √
Genotoxicity ISO 10993-5 √ √
Bone and muscle implant tests ISO 10993-6 √ Muscle
Hemolysis ASTM F-756 √ √
Pyrogenicity USP 151 √ √
* Including exhaustive extractions and risk assessment
High-Performance Plastics for Healthcare / 5
SterilizationSolvay’s healthcare plastics cover the gamut of sterilization technologies. Reusable devices are chemically washed and disinfected prior to any sterilization procedure. Those that are steam sterilized may be exposed to other chemicals, such as morpholine, which are often used in central steam sterilization systems to inhibit corrosion in the lines. For this reason, manufacturers should check performance under conditions that best simulate the intended use of the fabricated part in order to assess their cumulative effect on the material.
Compatibility with sterilization methods
Steam 18 minutes at 134 °C
Ethylene Oxide Gas
Vaporized Hydrogen Peroxide
High-Energy Gamma
Radiation
10 cycles 100 cycles 1000 cycles 100 cycles 200 cycles 40 kGy
High-Performance Medical Grade Plastics
Radel® PPSU √ √ √ √ √ √
Udel® PSU √ √ √ √ √
Ixef® PARA √ √ √
AvaSpire® PAEK √ √ √ √ √ √
KetaSpire® PEEK √ √ √ √ √ √
PrimoSpire® SRP √ √ √ √ √ √
Solviva® Biomaterials
Zeniva® PEEK √ √ √ √ √ √
Proniva® SRP √ √ √ √ √ √
Veriva® PPSU √ √ √ √ √ √
Eviva® PSU √ √ √ √ √
Contact your Solvay representative for information specific to Solviva® Biomaterials
6 \ High-Performance Plastics for Healthcare
Cleaning & DisinfectingCompatibility with cleaning agents and disinfectants is an important consideration when selecting materials for healthcare applications. Chemical resistance varies considerably among plastics and is largely dependent on molecular structure. Other influential factors include:
• Type of reagent
• Reagent concentration
• Temperature
• Exposure time
• Stress on fabricated part
Stress can be caused by an external load applied during use or by a residual internal stress in the molded part due to processing. Residual stress can be minimized
by adjusting processing conditions. It’s important to be familiar with a material’s performance under unstressed and stressed conditions as some reagents having no effect on unstressed plastic can cause cracking when stressed.
The table below gives a general indication of the compatibility of our medical grade plastics with commonly used hospital disinfectants. Because performance and design criteria are application specific, manufacturers should check performance under conditions that best simulate the intended use of the fabricated part. This includes cleaning and disinfecting followed by sterilization in order to assess their cumulative effects on the material.
Compatibility with hospital disinfectantsRadel® PPSU
Udel® PSU
Ixef® PARA
AvaSpire® PAEK
KetaSpire® PEEK
PrimoSpire®
SRP
Aseptisol® Excellent Excellent Not Tested Excellent Excellent Not Tested
Bleach solutions, 10 % Excellent Excellent Excellent Excellent Excellent Excellent
Cavicide® Excellent Excellent Excellent Excellent Excellent Excellent
Envirocide® Excellent Excellent Excellent Excellent Excellent Excellent
Cidex® Excellent Excellent Not Tested Excellent Excellent Excellent
Lysetol® FF Excellent Good Not Tested Excellent Excellent Excellent
Grotanat® Excellent Poor Not Tested Excellent Excellent Not Tested
Hydrogen peroxide, 3 % Excellent Excellent Excellent Excellent Excellent Excellent
Isopropyl alcohol, 70 % Excellent Good Excellent Excellent Excellent Excellent
Manu-Klenz® Excellent Excellent Excellent Excellent Excellent Excellent
Phenols, 2 % Excellent Good Excellent Excellent Excellent Excellent
Puristeril Plus® Excellent Excellent Not Tested Excellent Excellent Not Tested
Quaternaries Excellent Good Excellent Excellent Excellent Excellent
Sani-Cloth® HB Excellent Excellent Excellent Excellent Excellent Excellent
Sani-Cloth® Plus Excellent Poor Excellent Excellent Excellent Excellent
Sporota® 100 Excellent Good Not Tested Excellent Excellent Not Tested
Super Sani-Cloth® Excellent Good Excellent Excellent Excellent Excellent
Wex-Cide® Excellent Poor Excellent Excellent Excellent Excellent
Contact your Solvay representative for information specific to Solviva® Biomaterials
High-Performance Plastics for Healthcare / 7
Design FreedomSolvay’s healthcare plastics are easily processed using standard molding techniques. With the exception of Ixef® PARA compounds, they can be extruded into thin films and into stock shapes for machining and low-volume production. For detailed processing information, visit www.healthcarepolymers.com.
Processing and fabrication
Injection Molding Extrusion
Thermo- forming Machining Pad Printing
Over- molding
LaserEtching
Radel® PPSU √ √ √ √ √ √ √
Udel® PSU √ √ √ √ √ √ √
Ixef® PARA √ √ √ √
AvaSpire® PAEK √ √ √ √ √ √
KetaSpire® PEEK √ √ √ √ √
PrimoSpire® SRP √ √ √ √ √ √
Contact your Solvay representative for information specific to Solviva® Biomaterials
Customize Your Look With ColorSet yourself apart from the competition by using color to create a fresh, exciting look for your products. Colors can also provide a quick visual reference for differentiating sizes.
Where transparency is important, consider Udel® PSU and Radel® PPSU resins, which in their natural state have a near water-white and light amber color respectively. They are available in a range of vibrant transparent colors that deliver a clear advantage over metal without compromising performance.
Solvay also offers a wide range of opaque colors for several of its medical grade plastics. Opaque and transparent Radel® PPSU colors and Ixef® PARA gamma-stabilized colors are supported by FDA Master Access Files ( MAF ) and demonstrate no evidence of cytotoxicity, sensitization, intracutaneous reactivity or acute systemic toxicity.
Color availability
Transparent OpaqueGamma-
Stabilized
Radel® PPSU √ √
Udel® PSU √ √
Ixef® PARA √ √
AvaSpire® PAEK √
8 \ High-Performance Plastics for Healthcare
Property (1) UnitsRadel® R-5000
Radel® RG-5030
Udel®
P-1700Udel®
GF-120Ixef® 1022
PrimoSpire® PR-9250
Test Method
Polymer type PPSU PPSU PSU PSU PARA SRP
Fiber reinforcement Unreinforced 30 % glass Unreinforced 20 % glass 50 % glass Unreinforced
Tensile strength MPa 70 120 70 97 280 152 ASTM D638
ksi 10.1 17.4 10.2 14.0 40.6 22.0
Tensile modulus GPa 2.3 9.2 2.5 6.0 20.0 5.5 ASTM D638
ksi 340 1,330 360 540 2,900 800
Tensile elongation at break
% 60 – 120 2 50 – 100 3 1.8 – 1.9 5 – 7 ASTM D638
Flexural strength MPa 91 173 106 148 400 234 ASTM D790
ksi 13.2 25.1 15.4 18.5 58.0 34.0
Flexural modulus GPa 2.4 8.1 2.7 5.5 19 6.0 ASTM D790
ksi 350 1,170 390 550 2,760 870
Izod impact, notched
J / m 690 75 69 53 110 59 ASTM D256
ft-lb / in 13.0 1.4 1.3 1.0 2.1 1.1
Izod impact, unnotched
J / m No break 640 No break 480 850 1,600 ASTM D4812
ft-lb / in No break 12 No break 9 16 30
HDT (2) at 1.82 MPa ( 264 psi )
°C 207 210 174 180 230 151 ASTM D648
°F 405 410 345 356 446 304
CLTE (3) flow direction
ppm/ °C (°F)
56 (31) 18 (10) 56 (31) 23 (13) 1.5 (0.8) 31 (17) ASTM D696
CLTE (3) transverse direction
ppm/ °C (°F)
56 (31) 56 (31) 56 (31) 56 (31) 4.6 (2.5) 31 (17) ASTM D696
Water absorption, 24 hours
% 0.4 0.3 0.3 0.2 0.2 0.1 ASTM D570
Specific gravity 1.29 1.53 1.24 1.40 1.64 1.19 ASTM D792
Contact your Solvay representative for information specific to Solviva® Biomaterials(1) Actual properties of individual batches will vary within specification limits(2) Heat deflection temperature(3) Coefficient of linear thermal expansion, average value between 0 °C - 150 °C (32 °F - 302 °F)
Typical Properties
High-Performance Plastics for Healthcare / 9
Property (1) UnitsAvaSpire®
AV-651
AvaSpire® AV-651
GF30
AvaSpire® AV-651
CF30KetaSpire®
KT-880
KetaSpire® KT-880
GF30
KetaSpire® KT-880
CF30Test
Method
Polymer type PAEK PAEK PAEK PEEK PEEK PEEK
Fiber reinforcement Unreinforced 30 % glass 30 % carbon Unreinforced 30 % glass 30 % carbon
Tensile strength MPa 87 156 184 100 162 223 ASTM D638
ksi 12.6 22.7 26.7 14.5 23.5 32.3
Tensile modulus GPa 3.0 9.9 20.7 3.7 10.8 20.9 ASTM D638
ksi 430 1,440 3,000 530 1,560 3,020
Tensile elongation at break
% > 40 2.9 1.5 10 – 20 2.8 1.7 ASTM D638
Flexural strength MPa 124 234 262 153 260 321 ASTM D790
ksi 18.0 34.0 38.0 22.2 37.7 46.6
Flexural modulus GPa 3.1 9.4 17.2 3.8 10.5 17.9 ASTM D790
ksi 450 1,360 2,500 550 1,530 2,600
Izod impact, notched
J / m 69 107 59 53 69 64 ASTM D256
ft-lb / in 1.3 2.0 1.1 1.0 1.3 1.2
Izod impact, unnotched
J / m No break 960 590 No break 850 640 ASTM D4812
ft-lb / in No break 18 11 No break 16 12
HDT (2) at 1.82 MPa ( 264 psi )
°C 190 213 212 160 315 315 ASTM D648
°F 374 415 414 320 599 599
CLTE (3) flow direction
ppm/ °C (°F)
54 (30) 19 (11) 6 (3) 47 (26) 20 (11) 7 (4) ASTM D696
CLTE (3) transverse direction
ppm/ °C (°F)
53 (29) 52 (29) 48 (27) 50 (28) 66 (37) 57 (32) ASTM D696
Water absorption, 24 hours
% 0.2 0.2 0.2 0.1 0.1 0.1 ASTM D570
Specific gravity 1.29 1.52 1.42 1.30 1.53 1.41 ASTM D792
Contact your Solvay representative for information specific to Solviva® Biomaterials(1) Actual properties of individual batches will vary within specification limits(2) Heat deflection temperature(3) Coefficient of linear thermal expansion, average value between 0 °C - 150 °C (32 °F - 302 °F)
www.solvay.com
Safety Data Sheets (SDS) are available by emailing us or contacting your sales representative. Always consult the appropriate SDS before using any of our products.
Neither Solvay Specialty Polymers nor any of its affiliates makes any warranty, express or implied, including merchantability or fitness for use, or accepts any liability in connection with this product, related information or its use. Some applications of which Solvay’s products may be proposed to be used are regulated or restricted by applicable laws and regulations or by national or international standards and in some cases by Solvay’s recommendation, including applications of food/feed, water treatment, medical, pharmaceuticals, and personal care. Only products designated as part of the Solviva® family of biomaterials may be considered as candidates for use in implantable medical devices. The user alone must finally determine suitability of any information or products for any contemplated use in compliance with applicable law, the manner of use and whether any patents are infringed. The information and the products are for use by technically skilled persons at their own discretion and risk and does not relate to the use of this product in combination with any other substance or any other process. This is not a license under any patent or other proprietary right.
All trademarks and registered trademarks are property of the companies that comprise the Solvay Group or their respective owners.© 2015, Solvay Specialty Polymers. All rights reserved. D 03/2008 | R 03/2015 | Version 4.1
Specialty Polymers
Worldwide [email protected] Lombardia, 20 20021 Bollate (MI), Italy
Americas [email protected] McGinnis Ferry RoadAlpharetta, GA 30005, USA
South [email protected] Galvão Bueno, 5.505- Batistini09842-080 - São Paulo, SP - Brazil
Asia [email protected] Jindu Road Shanghai, China 201108