hiq catalog
DESCRIPTION
Hiq CatalogTRANSCRIPT
-
Head Office & Factory615 Bakdal-Dong, Manan-Gu, Anyang-Si, Gyeonggi-Do, 430-849, Koreawww.noroopaint.com/en www.autorefinishes.com
Overseas Planning Team Tel(82-31)467-6069 Fax(82-31)448-2085Overseas Development Team Tel(82-31)467-6461 Fax(82-31)448-2085Overseas Sales Team Tel(82-31)467-6283 Fax(82-31)467-6512Customer Service : [email protected]
All information had been prepared based on theories and experiences of laboratory. Due to continuous quality improvement activities, they would be changed without notice. Spraying amount may vary depending on material shape, weather condition and painting method. Thus please consider spraying condition.
Catalogue No : OS2-1222
-
HiQ PRODUCT GUIDE BOOK 04 l 05
The superior HiQ automotive refinishes system offers you afull range of easy-to-use products and system to meet thespecific needs of body shops.
From passenger cars to commercial and special purposevehicles finishing, HiQ system provides you with excellentcolor stability, premium coverage in easily handled metallic,solid and pearl.
Being founded on a universal colorant system, bothbasecoat and 2K urethane topcoat are available in HiQautomotive refinishes system by using two types of binders.
HiQ bases are solventborne concentrates. Due to this fact,HiQ system requires smaller can size and provides longershelf life.
HiQ Color Bank System Original Paint and Universal Colorant
1Basecoat Color1:1
1DR-421
2K Acrylic Urethane for single stage?Mixing binder : UU-1000?White : UU-7000?Spraying viscosity : 15~20 sec. Ford Cup #4 at 25(77F)3
UNITAN Color3:1:0.5~11
SSH-302 orCCH-200
0.5~1DR-421
Hi-135, Hi-145, Hi-150, Hi-155, Hi-163, Hi-165, Hi-167, Hi-175, Hi-179, Hi-181, Hi-182,Hi-185, Hi-195
Hi-235, Hi-246, Hi-247
Hi-336, Hi-345, Hi-355, Hi-365, Hi-376, Hi-377, Hi-386, Hi-387, Hi-395, Hi-396, Hi-398
Hi-435, Hi-445
Hi-525, Hi-535, Hi-543, Hi-546, Hi-550, Hi-555, Hi-575, Hi-580, Hi-583
Hi-635, Hi-645
Hi-735, Hi-745
Hi-810, Hi-820, Hi-835, Hi-855
Hi-925, Hi-935, Hi-939, Hi-940, Hi-941, Hi-941, Hi-945, Hi-971 , Hi-975, Hi-977, Hi-979,Hi-985, Hi-987, Hi-989, Hi-995
Hi-013, Hi-015, Hi-016, Hi-018, Hi-022, Hi-027, Hi-033, Hi-035, Hi-036, Hi-037, Hi-039, Hi-041, Hi-042, Hi-045,Hi-047, Hi-049, Hi-051, Hi-053, Hi-055, Hi-056, Hi-057, Hi-061, Hi-065, Hi-071, Hi-073, Hi-075, Hi-076
Red Tone
Orange Tone
Yellow Tone
Green Tone
Blue Tone
Violet Tone
White Tone
Black Tone
Silver Tone
Mica Tone
How to getcolor quality
HI-135 HI-235
HiQ Automotive Refinishes Colorbank System Universal Colorant
Basecoat HiQ Base
1Basecoat Color1:1
1DR-421
?Mixing binder : BC-1000?Silver : BC-9000?White : BC-7000?Spraying viscosity : 14~16 sec. Ford Cup #4 at 25(77F)
Acrylic Urethane Top Coat Unitan How to make color coat
-
HiQ PRODUCT GUIDE BOOK 06 l 07
2) Color Bank System Color Guide
More than 5,000 color chips are based on OEMcolors of global car markets. It provides you withfast and accurate color workability. If the color ofthe vehicle to be repaired does not preciselymatch the OEM color, the adjacent color chipswill give you plenty of alternatives.
HiQ Color Bank System HiQ Color Bank System
1) Computerized Matching System
The Color Bank System is an intelligent, powerful tool for accurate color matches. It enables you to manage your paintmixing efficiently. It is designed for you to use it easily and also contains large color mixing information.This system is also able to offer you accurate information for the color matches. By installing this software simply you canuse it and you can also search on our website www.autorefinishes.com
Tools for HiQ Color Bank Color Bank System - Toner color placement guide chart
3) HiQ Color Chart
HiQ Color Chart (Solid, Mica) will be useful to understandHiQ Color system for perfect color matching.
-
HiQ PRODUCT GUIDE BOOK 08 l 09
Putty Primer Surfacers
DR-777W FastPS-220 DR-777 Series Reducer Selection
DR-777S StandardDR-777R Slow
1
1:1
1
Spraying Viscosity14~16 sec.Ford Cup #4 at 25C (77F)
Drying times (Time to sand)
Description?Light weight Polyester Putty?Fast drying time to sand?Very good adhesion on metal, Easy to sand
Mixing Ratio(by Wt(%))
100 1 ~ 3Body filler Hardener
Drying time to sand
20 mins. / 25C (77F)
Description?1K acrylic primer surfacer ?Easy to sand ?Quick drying time to sand(10mins. at 25C) Mixing Ratio(Vol.)
10 mins. / 25C
PS-440 PSH-504 DR-421
4 1 1~2
Spraying Viscosity14~16 sec. Ford Cup #4 at 25C (77F)
Pot life4 hours at 25C (77F) using PSH-504
Drying times (Time to sand)
Description?2K urethane primer-surfacer ?Easy to sand ?Excellent gloss and great workability Mixing Ratio(Vol.)
2 hours at 25C25 minutes at 60C
4:1:1~2
Reducer Selection 10~25?? 20~35? 30? or above5~15?Partial
1~3 panels4 panels or above
DR-421WDR-421WDR-421W
* It is recommended to mix DR-421S with 20-30% of DR-421R.
DR-421WS DR-421S DR-421SDR-421WS DR-421S DR-421S*DR-421WS DR-421S DR-421R
PS-570 PSH-507 DR-421
4 1 0.5~1
Spraying Viscosity15~20 sec. Ford cup #4 at 25C (77F)
Pot life4 hours at 25C (77F) using PSH-507
Drying times (Time to sand)
Description ?2K premium high solid primer ?Superior filling through high build ?Excellent gloss hold-out Mixing Ratio(Vol.)
2.5 hours at 25C30 minutes at 60C
4:1:0.5~1
Reducer Selection 10~25?? 20~35? 30? or above5~15?Partial
1~3 panels4 panels or above
DR-421WDR-421WDR-421W
* It is recommended to mix DR-421S with 20-30% of DR-421R.
DR-421WS DR-421S DR-421SDR-421WS DR-421S DR-421S*DR-421WS DR-421S DR-421R
Body filler PS-220 Acrylic Primer Surfacer
PS-440 Acrylic Urethane Primer Surfacer
PS-570 High solid Acrylic Urethane Primer Surfacer
-
HiQ PRODUCT GUIDE BOOK 10 l 11
CCH-250 Fast
TC-410(Clear Coat)
CCH-200 Series(Hardener) Hardener Selection
CCH-200 StandardCCH-230 Slow
4
4:1
1
Spraying Viscosity12~14sec. Ford cup #4 at 25C (77F)
Pot life3 hours at 25C (77F) using CCH-200
DryingSchedule
Mixing Ratio(Vol.)
Description?Fast drying type clearcoat for spot repair to 2~3 panels?Excellent drying time (very fast dust free time: 8~10mins. at 25?)?Air dry type clearcoat which does not need any heat treatment
Clear Coats Clear Coats
Hardener Selection 10~25C 20~35C 30? or above5~15CSpot repair
1~2 panel repairMulti panel repair
CCH-250CCH-250CCH-250
CCH-200 CCH-230 CCH-230CCH-200 CCH-230 CCH-230CCH-200 CCH-230 Non applicable
Air dry times (at 25C)Dust freeTo deliver
8 ~ 10 mins. To polish 1.5 hrs.1.5 hrs. To stripe 1.5 ~ 2.0 hrs.
CCH-250 Fast
CCH-200 Series(Hardener)
TC-310Q(Clear Coat) Hardener Selection
CCH-200 StandardCCH-230 Slow
3 1
3:1
Spraying Viscosity14~16sec. Ford cup #4 at 25C (77F)
Pot life1 hour at 25C (77F) using CCH-200
DryingSchedule
Mixing Ratio(Vol.)
Description?Premium fast drying clearcoat for repairing from one panel to multi panels (2~4 panels)?Dries quickly without sacrificing appearance?Fast polishing time
Hardener Selection 10~25C 20~35C 30? or above5~15CSpot repair
1~2 panel repairMulti panel repair
CCH-250CCH-250CCH-250
CCH-200 CCH-230 CCH-230CCH-200 CCH-230 CCH-230CCH-200 CCH-230 Non applicable
Air dry times (at 25C)Dust freeTo deliver
10 ~ 15 mins. To polish 40 mins.40 mins. To stripe 1.5 ~ 2 hrs.
CCH-250 Fast
CCH-200 Series(Hardener)
DR-421 Series(Thinner)
TC-330(Clear Coat) Hardener Selection
CCH-200 StandardCCH-230 Slow
3 1 0.3
3:1:0.3
Spraying Viscosity14~16sec. Ford cup #4 at 25C (77F)
Pot life3 hours at 25C (77F) using CCH-200
DryingSchedule
Mixing Ratio(Vol.)
Description ?High efficient clearcoat which can be both air dried and force dried?From multi panels to full resprays. Optimum result can be achieved when spraying 2~4 panels.?Film property, appearance and dryness are well balanced
Hardener Selection 10~25C 20~35C 30? or above5~15CSpot repair
1~2 panel repairMulti panel repair
CCH-270CCH-270CCH-250
CCH-250 CCH-200 CCH-230CCH-200 CCH-230 CCH-230CCH-200 CCH-230 Non applicable
Air dry times (at 25C)Dust freeTo deliver
Dust freeTo deliver
To polishTo stripe
15 ~ 20 mins. To polish 2.0 hrs.2.0 hrs.
Force dry times, 20 mins. at 60C (140F)At cool down
30 mins. (after cool down)30 mins. (after cool down)30 mins. (after cool down)
To stripe 2.0 ~ 2.5 hrs.
CCH-250 Fast
CCH-200 Series(Hardener)
TC-2110(Clear Coat)
DR-421 Series(Thinner) Hardener Selection
CCH-200 StandardCCH-230 Slow
2 1 0.5~12:1:0.5~1
Spraying Viscosity12~14 sec. Ford cup #4 at 25C (77F)
Pot life4 hours at 25C (77F) using CCH-200
DryingSchedule
Mixing Ratio(Vol.)
Description ?High build film is easily achieved by spraying ?From spot repairs to full resprays?Viscosity can be controlled by adjusting dilution rate of thinner?Excellent appearance and drying property, easy to apply
Hardener Selection 10~25C 20~35C 30? or above5~15CSpot repair
1~2 panel repairMulti panel repair
Overall repair
CCH-250CCH-250CCH-250CCH-250
CCH-250 CCH-200 CCH-230CCH-250 CCH-200 CCH-230CCH-200CCH-200
CCH-230CCH-230
CCH-230CCH-230
Air dry times (at 25C)Dust freeTo deliver
Dust freeTo deliver
To polishTo stripe
40~50 mins. To polish 10 hrs.10 hrs.
Force dry times, 30 mins. at 60C (140F)At cool down
30 mins. (after cool down)30 mins. (after cool down)
0.5~1.0 hrs. (after cool down)
To stripe 12 hrs.
TC-410
TC-310 Q
TC-330
TC-2110
-
HiQ PRODUCT GUIDE BOOK 12 l 13
Clear Coats Clear Coats
CCH-250 Fast
CCH-200(Hardener)
Ventus Clear(Clear Coat)
DR-421 Series(Thinner) Hardener Selection
CCH-200 StandardCCH-230 Slow
2 1 0.2
2:1:0.2
Mixing Ratio(Vol.)
Description ?Superb appearance and high gloss hold out?Multi-panel and overall repairs in the spray booth.?Good anti-scratch property after force dry applicable with OEM basecoat/clearcoat.?Excellent flow and melt-in properties
CCH-550 Fast
CCH-500 Series(Hardener)
TC-5210(Clear Coat)
DR-421 Series(Thinner) Hardener Selection
CCH-500 StandardCCH-530 Slow
2 1 0.2
2:1:0.2
Spraying Viscosity14~16sec. Ford cup #4 at 25C (77F)
Pot life1 hour at 25C (77F) using CCH-500
Ready to Spray VOC (2:1:0.2)TC-5210 yields a VOC content of : 500g/liter (4.2lb/gal)
DryingSchedule
Mixing Ratio(Vol.)
Description ?High performance clearcoat ?From spot repairs to full resprays?Excellent film properties and gloss retention?Forms enough film thickness with 1.5 wet coats ?High build efficiency
Hardener Selection 10~25C 20~35C 30? or above5~15CSpot repair
1~2 panel repairMulti panel repair
Overall repair
Non applicableCCH-500CCH-500CCH-500
CCH-500 CCH-530 CCH-530CCH-500 CCH-530 CCH-530CCH-530CCH-530
CCH-530CCH-530
CCH-530CCH-530
Air dry times (at 25C)Dust freeTo deliver
Dust freeTo deliver
To polishTo stripe
50~60 mins. To polish 10 hrs.10 hrs.
Force dry times, 30 mins. at 60C (140F)At cool down
20 mins. (after cool down)20 mins. (after cool down)
1.0~2.0 hrs. (after cool down)
To stripe 12 hrs.
CCH-250 Fast
CCH-200(Hardener)
TC-3100MC(Clear Coat)
DR-421 Series(Thinner) Hardener Selection
CCH-200 StandardCCH-230 Slow
3 1 0.33:1:0.3
Spraying Viscosity13~15 sec. Ford cup #4 at 25C (77F)
Pot life6 hours at 25C (77F) using CCH-200
Drying Schedule
Mixing Ratio(Vol.)
Description ?Clear for Non-gloss type?Applicable to plastic bumper
Hardener Selection 10~25C 20~35C 30? or above5~15C1~2 panel repairMulti panel repair
Overall repair
CCH-250CCH-250CCH-200
CCH-200 CCH-230 CCH-230CCH-200 CCH-230 CCH-230CCH-200 CCH-230 CCH-230
10 hours at 25C30 minutes at 60C
Spraying Viscosity14~16sec. Ford cup #4 at 25C (77F)
Pot life4 hours at 25C (77F) using CCH-200
DryingSchedule
Hardener Selection 10~25C 20~35C 30? or above5~15CSpot repair
1~2 panel repairMulti panel repair
Overall repair
CCH-250CCH-250CCH-200CCH-200
CCH-200 CCH-230 CCH-230CCH-200 CCH-230 CCH-230CCH-200CCH-230
CCH-230CCH-230
CCH-230CCH-230
Air dry times (at 25C)Dust freeTo deliver
Dust freeTo deliver
To polishTo stripe
50 ~ 60 mins. To polish 7 hrs.12 hrs.
Force dry times, 30 mins. at 60C (140F)At cool down
30 mins. (after cool down)20 mins. (after cool down)
0.5~1.0 hrs. (after cool down)
To stripe 12 hrs.
CCH-250 Fast
CCH-200 Series(Hardener)
MCP(Clear Coat)
DR-421 Series(Thinner) Hardener Selection
CCH-200 StandardCCH-230 Slow
2 1 0.22:1:0.2
Spraying Viscosity14~16 sec. Ford cup #4 at 25C (77F)
Pot life6 hours at 25C (77F) using CCH-200
DryingSchedule
Mixing Ratio(Vol.)
Description ?Excellent appearance through advanced DOI and high gloss?From spot repairs to full resprays?Superior appearance achieved through excellent leveling and thickening property
Hardener Selection 10~25C 20~35C 30? or above5~15CSpot repair
1~2 panel repairMulti panel repair
Overall repair
CCH-250CCH-250CCH-250CCH-200
CCH-200 CCH-200 CCH-230CCH-200 CCH-200 CCH-230CCH-200CCH-200
CCH-230CCH-230
CCH-230CCH-230
Air dry times (at 25C)Dust freeTo deliver
Dust freeTo deliver
To polishTo stripe
50~60 mins. To polish 10 hrs.10 hrs.
Force dry times, 30 mins. at 60C (140F)At cool down
30 mins. (after cool down)30 mins. (after cool down)30 mins. (after cool down)
To stripe 12 hrs.
Ventus Clear Plus(TC-1200)
TC-5210 (High solid type)
MATT CLEAR TC-3100MC
MASTER CLEAR PLUS
-
Miscellaneous
DR-421 Urethane Thinner
DR-421 is an exclusive urethane thinnerfor HiQ products.
DR-500 Blending Solvent
DR-500 is a ready-to-spray blendingagent which is used for melting theedge of 2K urethane topcoats. It isspecif ically designed as an edgeblending solvent for invisible blendrepairs where overall repairs are notdesirable.
DR-180 Car-Cleaner
Car Cleaner DR-180 is designed toremove grease, oil, wax and othercontaminants from bare metal, plastics,existing finishes, etc.
CA-200 Anti-Pinhole, Reaction Accelerator
CA-200, a reaction accelerator and anti-catalyst, is an additive which stimulatesthe cure of 2K urethane paint and aneffective item to prevent pinholingduring drying time.
PP-100, PP-120 Plastic Primer
Plastic Primer PP-100 and PP-120 area single-component, non-sanding, fast-drying adhesion promoter, designed forrefinishing thermoplastic bumper coversand other exterior/interior plastics.
FA-200 Flexible Additive
Urethane Flexible Additive FA-200offers you the advantages of veryflexible additive for acrylic lacquer,acrylic enamel, polyurethane enamel,acrylic urethane enamel and primer-surfacers. FA-200 adds flexibility toeach of those systems. Furthermore, itcan be applied over a wide range ofsemi-rigid and flexible plastic parts withease of use.
/ColorImageDict > /JPEG2000ColorACSImageDict > /JPEG2000ColorImageDict > /AntiAliasGrayImages false /CropGrayImages true /GrayImageMinResolution 300 /GrayImageMinResolutionPolicy /OK /DownsampleGrayImages true /GrayImageDownsampleType /Bicubic /GrayImageResolution 1200 /GrayImageDepth -1 /GrayImageMinDownsampleDepth 2 /GrayImageDownsampleThreshold 1.50000 /EncodeGrayImages true /GrayImageFilter /DCTEncode /AutoFilterGrayImages true /GrayImageAutoFilterStrategy /JPEG /GrayACSImageDict > /GrayImageDict > /JPEG2000GrayACSImageDict > /JPEG2000GrayImageDict > /AntiAliasMonoImages false /CropMonoImages true /MonoImageMinResolution 1200 /MonoImageMinResolutionPolicy /OK /DownsampleMonoImages true /MonoImageDownsampleType /Bicubic /MonoImageResolution 1200 /MonoImageDepth -1 /MonoImageDownsampleThreshold 1.50000 /EncodeMonoImages true /MonoImageFilter /CCITTFaxEncode /MonoImageDict > /AllowPSXObjects false /CheckCompliance [ /None ] /PDFX1aCheck false /PDFX3Check false /PDFXCompliantPDFOnly false /PDFXNoTrimBoxError true /PDFXTrimBoxToMediaBoxOffset [ 0.00000 0.00000 0.00000 0.00000 ] /PDFXSetBleedBoxToMediaBox true /PDFXBleedBoxToTrimBoxOffset [ 0.00000 0.00000 0.00000 0.00000 ] /PDFXOutputIntentProfile (None) /PDFXOutputConditionIdentifier () /PDFXOutputCondition () /PDFXRegistryName () /PDFXTrapped /False
/Description > /Namespace [ (Adobe) (Common) (1.0) ] /OtherNamespaces [ > /FormElements false /GenerateStructure true /IncludeBookmarks false /IncludeHyperlinks false /IncludeInteractive false /IncludeLayers false /IncludeProfiles true /MultimediaHandling /UseObjectSettings /Namespace [ (Adobe) (CreativeSuite) (2.0) ] /PDFXOutputIntentProfileSelector /NA /PreserveEditing true /UntaggedCMYKHandling /LeaveUntagged /UntaggedRGBHandling /LeaveUntagged /UseDocumentBleed false >> ]>> setdistillerparams> setpagedevice