holley efi diagnostic type 7 cl and learn for v3+
DESCRIPTION
Diagnostic Type 7 will tell you what is inhibiting closed loop or learn in the Holley EFI system.TRANSCRIPT
As of v0595:
Diagnostic Type 71M's 100k's 10k's 1k's hundreds1xxxxxx x1xxxxx xx1xxxx xxx1xxx xxxx1xx
CL State Diag #2 Closed Loop active=1, inactive=0
CL Conditions Diag #3 O2 Ready
CL Conditions Diag #4 Fuel cut N2O
CL Conditions Diag #5 Coastdown AE Fuel TPS letoffLearn State Diag #6 Learn Active=1, inactive =0
Diag #7
Diag #8 N2O Alpha-N region
Engine Running
CL Enabled (System ICF)
Afterstart Enrichment
Min TPS to enter CL
Max TPS before Open Loop
Boost Builder, Fixed Fuel
Learn Conditions
Learn Enabled (System ICF)
Closed loop active
RPM to Enter Learn
Min TPS to Enter Learn
Learn Conditions
Boost Builder, Fixed Fuel
Boost Builder, Fixed Timing
tens onesxxxxx1x xxxxxx1
CTS min
Always 0
Always 0
RPM Threshold
Rev Limiter, Fuel
Rev Limiter, spark
Boost Builder, Fixed Timing
Boost Builder, Nitrous
Coolant Temp Erichment >100
Boost Builder, Nitrous