holmenkol race guide alpine

MADE IN GERMANY

RACE GUIDERACE GUIDEALPINE / BOARD 09/10

11/2

009

Art.-

Nr.

2327

2-EN Official supplier of:

HOLMENKOL AG

Wernher-von-Braun-Str. 3D-71254 Heimerdingen

Phone +49(0)7152-6101-100 Fax +49(0)7152-6101-129

[email protected]

Athl

ete:

Silv

ia B

erge

r / P

hoto

grap

her:

Eric

h Sp

iess

.

ExpertTipExpertTipExpertTip

2 3

PRODUCT INFORMATION

Racing Finish 4 – 8Racing Finish chart 7HybridFX race wax 9 – 13HybridFX waxing chart 10 – 11Base wax 14 – 15Jump wax 16 – 17Cleaning / Care / Repair 18 – 19Ski vises 20 – 21Edge tuning 22 – 23Files 24 – 25Waxing irons 26 – 27Scrapers 28Structure tools 29Brushes 30 – 33Accessories 34 – 35Textile care 36 – 39

APPLICATION TIPS

Basic preparation for new skis 42 – 45Edge and base repair 46 – 47Race preparation 48 – 51Speed preparation 52 – 56Structure preparation with TriMaxx 57After the race 57

ALL ABOUT...

All about snow 58 – 61All about edges 62 – 63 All about bases 64All about structures 65Safety measures during waxing 66 – 67Application videos / seminars 68

THE NEW RACE GUIDE IS OUT!

Packed with information about applications and all alpine race products, this is the new, improved and extended replacement for our well-known Wax Guide.

HOLMENKOL® has been active in the alpine ski ® has been active in the alpine ski ®

circus for decades, supporting almost 50 national teams worldwide and working with the best athletes and service staff around the globe.

Only hard facts are enough to convince service personnel: They are only satisfied with high-performance products made of the best materials! However, outstanding performance at the peak level of your sport can only be achieved when top notch products are applied correctly. In the Race Guide, we will disclose a few World Cup secrets and introduce you to the proven application used by World Cup winners – clearly explained, with many illustrations.

I have put an “ExpertTip” label next to those products that should be in every service kit.

My team and I very much look forward to seeing you at one of our seminars, which all revolve around one key theme: the License to WIN!

We wish you a thrilling and successful season!

Best wishes,Best wishes,FranzFranz

PREFACE CONTENT

Franz NemethDirector World Racing Team Alpin

RRACINGACING F FINISH FINISH F INISH INISH

ExpertTipExpertTipExpertTipExpertTip

4 5

The new, patented nano-CFC® technology made by HOLMENKOL® was first used for Racing Finish products – the new HOLMENKOL® Speed-Powder collection. Besides nano-CFC® effects, the new SpeedPowder collection was adapted to the specific conditions for alpine and Nordic skiing using a highly optimized blend of ingredients. The combination of HOLMENKOL® race waxes and SpeedPowders of the latest nano-CFC®

generation delivers a true license to win.

SpeedPowder Hybrid: The patented nano-CFC® technology combines the outstanding gliding properties of conventional fluorinated powder with the physical surface effects of nano composites. Put this together with HOLMENKOL® race waxes and the result is first class gliding coating for your race base that sets new benchmarks in speed, abrasion resistance, versatility and ease of application.

SpeedPowder Hybrid COLD Best for: Cold and dry snow.

24335 15 g

SpeedPowder Hybrid WET Best for: Damp to wet coarse- and fine-grained snow

24331 25 g

SpeedPowder Hybrid MID Best for: Fine- to coarse-grained snow.

24333 30 g

SpeedPowder Hybrid WET 0° ~ -4° C 0° ~ -4° C wet to dampwet to damp 160°160°

SpeedPowder Hybrid MID - 2° ~ -15° C damp to dry 160°

SpeedPowder Hybrid COLD - 14° ~ -25° C- 14° ~ -25° C drydry 160°160°

Athl

ete:

Phi

lipp

Schö

rgho

fer /

Pho

togr

aphe

r: Er

ich

Spie

ss.

0° -2° -4° -6° -8° -10° -12° -14° -16° -18° -20° -22° -24° snow

RACING FINISH CHART alpine

Wet

Wet

Mid

Mid

Cold

Wet

Mid

Cold

Cold

Speed Block

SpeedFinish

Speed Paste

Hybrid Speed Powder

Paste Racing

76

SpeedPaste Racing: 100% fluorocarbon race wax paste. World Cup proven. Extreme acceleration, maximum speed and smooth gliding in all speed ranges. High abrasion resistance and outstanding versatility. SpeedPaste can be easily and conveniently applied to any ski or board until right before the start of the race, ensuring that the base and structure are not da-maged. SpeedPaste has been improved to match HOLMENKOL® race waxes, which makes it an essential for winning from start to finish.

SpeedPaste Racing For all snow types.24370 30 g

SpeedFinish: World Cup proven formulas give you first class, easy to apply gliding coating. When used with HOLMENKOL® race waxes or other HOLMENKOL® Racing Finish products, you will see outstanding results in terms of gliding effect and versatility. The smallest of particles give a multitude of contact points, which mean that SpeedFinish is firmly locked to your race base.

SpeedFinish WET Best for: Damp to wet fresh snow and fine-grained to slush snow, wet snow.24361 50 ml incl. FinishCork24361-R Racing Pack, (50 ml)

SpeedFinish COLD Best for: Cold and dry snow.

24365 50 ml incl. FinishCork24365-R Racing Pack, (50 ml)

SpeedFinish MID Best for: Fine- to coarse-grained snow.

24363 50 ml incl. FinishCork24363-R Racing Pack,(50 ml)

SpeedFinish WET 0° ~ -4° C0° ~ -4° C wet to dampwet to damp

SpeedFinish MID - 2° ~ -10° C wet, damp, dry

SpeedFinish COLD - 8° ~ -20° C- 8° ~ -20° C drydry

SpeedPaste Racing 0° ~ -6° C0° ~ -6° C wet, damp, drywet, damp, dry

RACING FINISH

R R RACACE E WAX WAX WAX HYBRID HYBRID HYBRID FX

98

SpeedBlock: World Cup proven formula for extreme acceleration and high speeds. To be rubbed onto prepared sliding surfaces or other Speed coatings until shortly before the start of the race.

SpeedBlock WET 0° ~ -5° C0° ~ -5° C wet to dampwet to damp 95° ~ 100° C95° ~ 100° C

SpeedBlock MID - 2° ~ -10° C wet, damp, dry 115° C

SpeedBlock COLD - 5° ~ -20° C- 5° ~ -20° C drydry 125° C125° C

SpeedBlock WET Best for: Damp to wet fresh snow, grainy to coarse-grained old or artificial snow.24351 15 g

SpeedBlock MID Best for: Fresh snow or damp, old or artificial snow.

24353 15 g

SpeedBlock COLD Best for: Cold or grainy snow.

24355 15 g

RACING FINISH

Athl

ete:

Elis

abet

h Gö

rgl /

Pho

togr

aphe

r: Er

ich

Spie

ss. HYBRID

Athl

ete:

Elis

abet

h Gö

rgl /

Pho

togr

aphe

r: Er

ich

Spie

ss. HYBRID

Athl

ete:

Elis

abet

h Gö

rgl /

Pho

togr

aphe

r: Er

ich

Spie

ss.

ALPINE RACE WAX HYBRIDFX

humidity 100 % - 50 % 50 % - 40 % 40 % - 0 %

1110

Race wax formulas based on hybrid technology for alpine racing. New raw materials that are being used exclusively by HOLMENKOL®

in combination with fluorocarbon work invisibly, providing optimum acceleration and gliding, excellent resistance to abrasion as well as a high level of repellence to water and dirt for an extremely broad range of applications.

The formulas for the HybridFX system have been optimized to deal with the most frequent snow conditions. What is more, additives can be combined with the race waxes to deal with special conditions. The formula has been optimized for high grade sintered and extrusion bases.

HYBRIDFX RACE WAX

1312

HybridFX GREEN For dry, fine- to coarse-grained and abrasive snow.24190 2 x 35 g 24191 6 x 150 g

Additiv High-Fluor GW 25 Additive for enhanced gliding, for improved water and dirt repellence of the HybridFX collection in high air humidity and / or on wet snow.24140 2 x 35 g24141 3 x 150 g

Additiv Graphite/Molybdean Additive to optimize the HybridFX collection on abrasive, cold andcoarse-grained snow or in low air humidity.24142 2 x 35 g24143 3 x 150 g

All HybridFX race waxes also come in 6 x 150 g boxes, additives in 3 x 150 g boxes.

HybridFX BLUE For dry fine- to coarse-grained and abrasive snow.24180 2 x 35 g 24181 6 x 150 g

HybridFX YELLOW For damp, fresh and fine snow or wet snow.24150 2 x 35 g24151 6 x 150 g

HybridFX WHITE For damp to dry fine- to coarse-grained snow.24170 2 x 35 g 24171 6 x 150 g

HybridFX RED For damp to dry fresh and fine-grained snow.24160 2 x 35 g 24161 6 x 150 g

Additiv Extreme Powder Wax additive to optimize wax properties on ice and extremely abrasive snow. Can also be used to protect the base along the edge.24149 25 g

HybridFX YELLOW 110° C

HybridFX RED 120° C

HybridFX WHITE 125° C

HybridFX BLUE 130° C

HybridFX GREEN 140° ~ 150° C

Additiv Extreme Powder 140 ° C

Ironing temperatures:

HYBRIDFX RACE WAX

RACING BASE WAX ExpertTipExpertTipExpertTip

1514

Successful formulas. Easy application – no mixing needed! Highest quality base and training wax based on hydrocarbons. Used and recommended by national teams and the ski industry.

Fluormix WHITE Lightly fluorinated high quality training and base wax for all types of snow, preferably for higher moisture.24130 3 x 35 g24133 6 x 150 g

Alphamix YELLOW For soft fresh and fine-grained snow.24100 3 x 35 g 24105 6 x 150 g

Alphamix YELLOW 0° ~ -4 ° C0° ~ -4 ° C wet to dampwet to damp 115° ~ 125°115° ~ 125°

Betamix RED -4° ~ -14° C damp to dry 125° ~ 135°

Ultramix BLUE -8° ~ -20° C-8° ~ -20° C damp to drydamp to dry 135° ~ 140°135° ~ 140°

Fluormix WHITE 0° ~ -14° C wet to damp 125° ~ 135°

Ultramix BLUEFor cold, very old and abrasive snow.24120 3 x 35 g 24125 6 x 150 g

Betamix REDFor all types of snow.24110 3 x 35 g24115 6 x 150 g

BASE WAX

Athl

ete:

Mar

io M

att /

Pho

togr

aphe

r: Er

ich

Spie

ss.

Athl

ete:

Mar

io M

att /

Pho

togr

aphe

r: Er

ich

Spie

ss.

RACING JUMP WAX

NEW

1716

Jump Ceramic Wax Highly abrasion-resistant wax for the ceramic inrun track for summer ski jumping.24906 6 x 150 g

Jump Competition RubMix Optimized ski jump wax to match the particular requirements of the ice track. A small bar to rub on, work in and brush off.24920 3 x 35 g

Jump Competition RED Optimized ski jump wax to match the particular requirements of the ice track. 24915 6 x 150 g

Jump Competition BLUE24916 6 x 150 g

Jump Competition ARCTIC 24917 6 x 150 g

Indoor Hot Wax Highly abrasion-resistant glide wax, optimized for extremely abrasive artificial snow in indoor ski centres.24711 6 x 150 g

Jump Competition RED 0° ~ -4° C0° ~ -4° C 130° ~ 140°130° ~ 140°

Jump Competition BLUE -3° ~ -8 ° C 130° ~ 140°

Jump Competition ARCTIC -7° ~ -25° C-7° ~ -25° C 140° ~ 150°140° ~ 150°

Jump Ceramic Wax --- 140° ~ 150°

Groove scraperHigh quality durable groove scraper with rounded aluminium to clean the centre groove of cross-country and jump skis.20638

SkiClip-JumpHandy ski clips. Help protect base and edges of jump skis.20813 1 pce.

JUMP WAX

NEWNEW

NEW

NEW

NEW

NEW

NEW

ExpertTipExpertTipExpertTipExpertTip

1918

CleanerSpecial cleaner to remove grease, oil, resin and wax from skis and clothes.20421 500 ml20422 1000 ml20423 3000 ml

Binding adhesiveSpecial adhesive to fasten binding screws.20476 100 ml

FibreFleece Versatile cleaning and polishing fleece. High absorbency of liquids and dirt. Comes with free knife.24490 25 m x 20 cm24491 100 m x 20 cm CareFleece 50

50 handy tissues for cleaning and polishing.24492 25 cm x 20 cm

RepairStrips transparent Ski base material strips to repair base damages. Iron on using a gas burner.20460 5 pcs.20461 1 kg

RepairStrips black20465 5 pcs.20466 1 kg

FX-Strips transparent Special candles for small base repairs. Suitable for all conventional ski bases and particularly for FX-Smartbase snowboard bases. Light the candle, drip on the wax, and you’re done. HOLMENKOL® has the exclusive world rights to supply FX-Smartbase ski wax and repair products.24400 5 pcs.24405 1 kg

FX-Strips black24401 5 pcs.24406 1 kg

CLEANING / CARE REPAIR

WaxAb - wax remover spray Special cleaner and wax remover for deep, gentle cleaning of skis and snowboards. Optimum dosability. 24410 250 ml

nano-CFC CleanerSpecial cleaner for nano-CFC powder and other RacingFinish products. Reliably dissolves residues, without harming the paraffin basis.24419 500 ml

NEW

NEW


2120

SuperPro EasySki vise for simple edge and base tuning of all alpine skis.24431

SuperProPlus WorldCupFirst class alpine ski vise for professional edge and base tuning. Infinitely adjustable from 90° to 60°.24432

SuperProPlus WideFirst class ski vise for professional edge and base tuning. Particularly suited for free ride and jump skis. Max. jaw opening 130 mm. Infinitely adjustable from 90° to 60°.24436

BoardFixSpecial snowboard vise for fast and easy horizontal and vertical use.20515

Stopper HolderTo hold ski brakes during ski tuning.20502

Ski Vise CompetitionSki vise for reliable edge and base tuning of all alpine skis.24469

Stopper Holder PROFor professional holding of brakes of alpine ski bindings during ski tuning.20504 2 pcs.

SKI VISES

NEW




2322

EdgeTrick PRO DiamondThe small pocket tool to remove rigidification and burrs from ski edges. Angle adjustment in 0.5° steps between 85° and 90°. Now comes with a diamond insert for extra long life.24455

CarveEdge HardMetalFilePrecise alignment with parabolic ski shape through two pivoting inserts. Angle adjustment in 0.5° steps between 85° and 90° (cuts metal and plastic), including tungsten carbide insert.24457

SideWall Planer SpareBlade *radius 3 mmSpare blade for SideWall Planer.24463

SegmentFile DiamondDiamond insert for CarveEdge and EdgeTrick.24460

SegmentFile HardMetalDurable knife for relief-grinding of edges. Suitable for CarveEdge.20588

BaseEdge File Guide 0.5°~1.5°Infinitely variable file guide, adjustable from 0.5° to 1.5°, for bevelled steel edges on the base side of alpine skis / snowboards. Suitable for ski files of between 20 and 25 mm wide.24450

SteelEdge WorldCupWorld Cup equipment for edge tuning of alpine skis and snow-boards. Angle adjustment in increments of degrees from 88° to 85°, to define the precise working angle of files, diamonds and aluminium oxide stones. Stainless steel is durable, helps spare the base and allows ergonomic use.24475

ERGO PROFI Racing 90°-85°High quality ergonomic edge sharpener with gliding rollers on the base side. For professional steel edge tuning. Grinding angle adjustable from 90° to 85°. Comes with a file. Can also be used with aluminium oxide stones, a cross file or a diamond file.24452

ERGO SEMI 90°-85°Ergonomic edge grinder with gliding surfaces on the base side. For smooth and secure grinding of steel edges. Grinding angle adjustable from 90° to 85°. Comes with a file. Can also be used with aluminium oxide stones, a cross file or a diamond file.24453

ERGO SideWall Planer *blade radius 3 mmErgonomic side wall planer with gliding surfaces on the base side. For use on skis and snowboards prior to grinding the steel edges. Scraping angle adjustable from 90° to 85°. Comes with a 3 mm radius blade.24451

SegmentFile CarbideTungsten carbide knife for aluminium carrier to be used in CarveEdge.24461

Aluminium carrierSegmentFile CarbideAluminium insert for tungsten car-bide knife to be used in CarveEdge.24462

EDGE TUNING

2052020523

20526

20529

2052120524

20527

252525242424

Professional files for fine-grinding of ski and board edges.

CrossFile MiniSki body file for grinding-in of edges.20521 100 x 30 mm

CrossFile Maxi20520 300 x 30 mm

RacingFileProfessional file, 13 cuts per cm, for precise fine-grinding of ski and board edges. 20523 250 x 25 mm 13 teeth / cm (L-MAXI)20524 100 x 25 mm 13 teeth / cm (L-MINI)20526 200 x 20 mm 15 teeth / cm (M-MAXI)20527 100 x 25 mm 15 teeth / cm (M-MINI)20529 150 x 15 mm 18 teeth / cm (S) FileBrush

File brush for removing iron shavings and swarf.20564

DiamondFileSki diamond files to tune steel edges. Various diamond sizes for removing rigidification or for profes-sional refinishing of ground edges.24465 DiamondFile Green, 110 mm – fine24466 DiamondFile Red, 110 mm – medium24467 DiamondFile Blue, 110 mm – coarse

Diamond World Cup FileDiamond file for polishing steel edges.24470 fine 600 WI24471 medium 400 YE24472 coarse 200 RD

Diamond replacementSpare foil for diamond file for polishing steel edges.24470-F fine 600 WI24471-F medium 400 YE24472-F coarse 200 RD

Grinding rubberTo blunt ground edges in the tip and tail areas in order to avoid catching an edge. 20550

Arkansas hardTo smooth ground edges.20575

Arkansas true hard20576

Oxyd miniAluminium oxide stone for edge repair and for removing rigidification. Suitable for Ergo edge grinder and SteelEdge.20561

FILES

NEW NEW

NEW


2726

SmartWaxerHandy wax iron with precise temperature control and constant heat through extra thick bottom plate. Rectangular metal surface. Unique special sole design ensures optimum distribution of wax. Compact, closed design with long cable and rack. 20604 110 V 20603 230 V

Wax iron protectionSmart protection for one of your most important tools. Supplied separately from RacingWaxer.24425

Betamix RED PastillesPellets for direct use with WaxPro. For all types of snow.24115-P 1 kg

WaxProWaxing machine for fast and easy wax application.24426 Roller width 125 mm

Spare tray for WaxPro24427 Roller width 125 mm

Digital RacingWaxerProfessional wax iron with digital temperature display and electronic temperature control.24423 110 V 24422 230 V

Waxing mask mediumProtection from vapour and dust during waxing and brushing. 20616

Waxing mask gas filterGas filter for waxing mask (20616).20617 1 pair

Waxing mask dust filterDust filter for waxing mask (20616).20618 1 pair

WaxFleeceFor uniform, sparing wax application.20620 100 pcs.

WAX IRONS

2928

Stainless steel scraperExtra sharp special scraper with extremely long life.20635 112.5 x 60 mm

Plexiglass scraper sharpener PROFor sharpening and precise dressing of plexiglass scrapers. Easy to handle, height-adjustable tungsten carbide knife with 4 cutting edges. To be screwed to the table / workbench. 20632

SIDE-MAXX spare bladeSpare blade for plexiglass scraper sharpener and Side-Maxx.20556

Plastic scraperPractical scraper to remove excess hot wax.20630 130 x 60 x 3 mm

Professional scraperSpecial World Cup proven scraper.20631 130 x 60 x 5 mm

Straightedge To control the straightness of the ski base.20636

ScraperUniversal special scraper to clean side walls and grooves.20637

TRIMAXX – Alpine structure tool Base structure tool for alpine skis.20642

TRIMAXX – Structure tool for jump skisBase structure tool for jump skis.20643

PadSet – Roughening padsSpecial grinding pads to roughen the base.24495

Alpine steel structure brushStructure brush for alpine skis, for extremely wet snow.20654

FinishCorkSpecial cork with felt to finish and polish wax and speed products.20645

KlettCork (for PadSet)Handy polishing cork with hook surface to be used with PadSet.20647

SCRAPERS STRUCTURE TOOLS


3130

BaseBrush Steel MicroFinishUltra-fine ski base brush to completely reveal the base structure. A must for racing competitions.24503 125 x 70 mm

BaseBrush BronzeFineFine ski base brush used to reveal the base structure.24501 125 x 70 mm BaseBrush BronzeFor cleaning the ski and removing glide wax.24500 125 x 70 mm BaseBrush HorsehairFine ski base brush for removing glide wax.24513 125 x 70 mm BaseBrush SyntheticUniversal ski base brush and polishing brush. 24510 125 x 70 mm

OvalBrush Steel MicroFinishUltra-fine stainless steel bristles that reveal the structure, making for more speed.24523 OvalBrush SteelHighly effective tool for cleaning the base prior to waxing and for removing paraffin wax.24522 OvalBrush BronzeFor cleaning the ski base and removing paraffin wax.24520 OvalBrush HorsehairFor revealing the base structure before preparing it with speed products.24533 OvalBrush Nylon Polishing brush.24530

BRUSHES


3332

BRUSHES

SpeedBrush Horsehair/Bronze20669

SpeedBrush Fleece Seamless fleece roller for rubbing in Racing Finish.20688 SpeedBrush CorkFor rubbing in Racing Finish.20673 SpeedBrush BronzeBrush for base cleaning and basic preparation. Always use with working protection (20686).20674 SpeedBrush HorsehairSki base brush for removing glide wax.20672 SpeedBrush FiberSki base brush for removing glide wax.20670 SpeedBrush Nylon Ski base brush for polishing.20671 SpeedBrush Fiber/BronzeProfessional tool for removing glide wax and for basic preparation.20668

SpeedStick Pro IIUnique click, fast-change mechanism in high-grade stainless steel design. For all SpeedBrush brushes.20685 120 mm

SpeedStick Pro II Adapter240 mm adapter for SpeedStick (20685). Handy double axis for parallel use of two different brushes.20687 240 mm

SpeedShield Pro II (working protection)Shield for SpeedStick (20685).20686 120 mm

NEW

NEW

NEW


3534

Waxing table ALPINELightweight, robust professional waxing table in aluminium stainless steel combination. Made in Germany. Comes with a bag. 24433

Wing screw for waxing tableSpare part for waxing table ALPINE (24433).24447

Waxing apronFunctional World Cup apron with many handy pockets.20750

Waxing table PROFIProfessional waxing table, World Cup proven. Robust, handy, indestructible. Comes with a bag.20720

Bag for waxing tableSpare bag for 20720 and 24433, sold separately from the table.20722

Thermometer for snow / air -30 / +50° C20731

Tape (plastic)Narrow adhesive tape for ski service.20740

Tape smart (paper)Large, flexible masking tape, easy to tear, reusable.20741

SkiClip Alpine / CarvingHandy ski clip. Spares the base and edges of alpine skis.20810 1 pce.

Waistbag - Racing20977

Shoulder Bag - Racing20978

BottlebagDrink belt with extra pocket and cup.20967 1l

ACCESSORIES

WaxSetBox, emptyBox for storing all those small items. 20692 (small)20694 (large)

HOLMENKOL® blue ServiceBoxLarge service box for TuneUp material and ski wax with various sizes of drawers. World Cup proven. 20703 465 x 180 x 360 mm

HYGIENE

EFFECT

HYGIENE

EFFECT

HYGIENE

EFFECT

Base Layer



NEW

3736

TEXTILE CAREHIGH-TECH EQUIPMENT NEEDS HIGH-TECH CARE

WASHING / REFRESHING

PreWash Sport - 22232– Special stain remover for sports

and functional textiles – Effectively removes typical stains

such as grass, soil, lubricating grease and blood

TextileWash - 22233– Functional washing agent for all

kinds of ski clothes (jackets, trousers, functional textiles and gloves)

– Hygienic and effective washing even at very low temperatures through the integral hygiene effect

– Removes dirt and sweat-related odours even at a washing temperature of 30° C

NaturalWash - 22245– Mild washing liquid with special

care agents for natural fibres– Suitable for (merino) wool, silk, etc.

and natural fillings (feathers / down)– Gentle, hygienic cleaning

SportHygienic - 22121– Concentrated hygienic spray with Concentrated hygienic spray with Concentrated hygienic spray with

odour absorber– Prevents odours from developing in

ski and snowboard boots– Ideal for the inside of ski helmets,

protectors, gloves and rucksacks

Athl

ete:

Silv

ia B

erge

r / P

hoto

grap

her:

Eric

h Sp

iess

.

UV-COLOUR

APPROVED

LOTUSHYBRID

MATRIX


NEW

NEW

38 39

TEXTILE CAREHIGH-TECH EQUIPMENT NEEDS HIGH-TECH CARE

WATERPROOFING / CARE

NoFog - 22301– High-tech cleaner for glasses, with

anti-fog coating– Effectively prevents fogging,

even in extreme humidity– Cleans all uncoated glasses– Also suitable for visors and

special glasses

HighTec Proof - 22150– Highly efficient nano waterproofing Highly efficient nano waterproofing

for leather and textiles– Promotes the breathability

of ski clothes – Strongly water and dirt repellent

Natural Leather Care - 22160– Natural leather care for all leather

materials, e.g. gloves

Athl

ete:

Elis

abet

h Gö

rgl /

Pho

togr

aphe

r: Er

ich

Spie

ss.

KNOW-KNOW- HOW HOW

4140

HOW TO USE

4342

-->CONTINUATION

BASIC PREPARATION FOR NEW SKIS

6

5

4

3

1

2

Slightly sand the base using green Slightly sand the base using green ski pads. This ensures the wax is ski pads. This ensures the wax is better absorbed.better absorbed.

Always ensure the ski / board is firmly Always ensure the ski / board is firmly clamped into the vise before you begin.clamped into the vise before you begin.

Before you use new skis for the first time, you should give them some basic preparation. This also goes for freshly sharpened and structured skis.

This first preparation is important as it enables the wax to penetrate deep into the ski base. Due to mechanical structuring of the base, fine hairs are produced and these are removed by this preparation. It also protects the base for subsequent edge tuning.

For this application you need the following products:

SuperProPlus World Cup Ref. No. 24432 p. 20BaseEdge File Guide Ref. No. 24450 p. 23WaxAb – wax remover spray Ref. No. 24410 p. 18CareFleece 50 Ref. No. 24492 p. 18PadSet Ref. No. 24495 p. 29HOLMENKOL® base wax p. 15Digital RacingWaxer Ref. No. 24422 p. 26 Alternatively: SmartWaxer Ref. No. 20603 p. 26 Optional: WaxFleece Ref. No. 20620 p. 27Plastic scraper Ref. No. 20630 p. 28ERGO SideWall Planer Ref. No. 24451 p. 22SteelEdge WorldCup Ref. No. 24475 p. 22CrossFile Mini Ref. No. 20521 p. 24RacingFile (L-Mini) Ref. No. 20524 p. 24 Alternatively: CarveEdge HardMetalFile Ref. No. 24457 p. 23DiamondFile Red Ref. No. 24466 p. 25Grinding rubber Ref. No. 20550 p. 25OvalBrush Steel Ref. No. 24522 p. 30 Alternatively: SpeedBrush Bronze Ref. No. 20674 p. 33

i

When the base is freshly ground, remove fine hair using a scraper When the base is freshly ground, remove fine hair using a scraper (plastic or stainless steel).(plastic or stainless steel).

Wax with base wax Wax with base wax (Alphamix Yellow or Betamix Red) (Alphamix Yellow or Betamix Red) and allow to cool.and allow to cool.

Tip: To avoid burning the base, use HOLMENKOL® WaxFleece.

Clean the base with cleaner or Clean the base with cleaner or WaxAb and CareFleece.WaxAb and CareFleece.

Use a BaseEdge File Guide and a Racing Use a BaseEdge File Guide and a Racing file to surface grind the ski / board (0.5°). In file to surface grind the ski / board (0.5°). In the front and rear areas, use a BaseEdge the front and rear areas, use a BaseEdge FileGuide for a bevelled edge between 1.0° FileGuide for a bevelled edge between 1.0° and 1.5° (depending on requirements and and 1.5° (depending on requirements and skier’s performance).skier’s performance).

4544

BASIC PREPARATION FOR NEW SKIS

9

10

11

8

7 12

13

14

Clamp a CrossFile Mini into the edge Clamp a CrossFile Mini into the edge grinder and pregrind to the desired angle. grinder and pregrind to the desired angle. Then continue using the RacingFile Then continue using the RacingFile (Maxi or Mini).(Maxi or Mini).

Alternatively:This process can be facilitated using This process can be facilitated using the CarveEdge HardMetalFile.the CarveEdge HardMetalFile.

Finish using the DiamondFile.Finish using the DiamondFile.

Use the grinding rubber to slightly blunt Use the grinding rubber to slightly blunt the extremely sharp edge in the front and the extremely sharp edge in the front and rear areas.rear areas.

In order to grind the edges precisely, In order to grind the edges precisely, remove any side wall projection using the remove any side wall projection using the ERGO SideWall Planer.ERGO SideWall Planer.

This process (waxing, scraping, brushing off) can be repeated several times until the base is sufficiently saturated.

Use a sharp scraping blade to scrape the Use a sharp scraping blade to scrape the slightly dirty base surface.slightly dirty base surface.

Use the OvalBrush Steel or the Use the OvalBrush Steel or the SpeedBrush Bronze to brush off SpeedBrush Bronze to brush off old wax from the structureold wax from the structure..

Apply base wax again Apply base wax again and iron into the base.and iron into the base.

Scrape (rather than brush) off the Scrape (rather than brush) off the excess wax. This ensures the base is excess wax. This ensures the base is protected from dirt when you tune the protected from dirt when you tune the side edges.side edges.

or:

4746

EDGE AND BASEREPAIR

1

2

3

4

When the edge shows rigidification, When the edge shows rigidification, pretreat using the DiamondFile Blue…pretreat using the DiamondFile Blue…

or:

… using the aluminium oxide stone.… using the aluminium oxide stone.

Alternatively, you may want to use Alternatively, you may want to use EdgeTrick PRO Diamond.EdgeTrick PRO Diamond.

Then polish using the DiamondFile.Then polish using the DiamondFile.

You should check your skis / boards on a regular basis. If you find any damage, proceed as follows before applying racing preparation:


DiamondFile Blue Ref. No. 24467 p. 25 Alternatively: Oxyd mini Ref. No. 20561 p. 25EdgeTrick PRO Diamond Ref. No. 24455 p. 23FX-Strips p. 19CrossFile Maxi Ref. No. 20520 p. 24Stainless steel scraper Ref. No. 20635 p. 28PadSet Ref. No. 24495 p. 29

i

Fill any damaged areas (scratches / holes) Fill any damaged areas (scratches / holes) with FX-Strips. To do this, light the FX-Strip with FX-Strips. To do this, light the FX-Strip and, holding it just above the area to be and, holding it just above the area to be treated, drip the wax onto it.treated, drip the wax onto it.

Once the wax has cooled, remove excess Once the wax has cooled, remove excess FX-Strip material using the CrossFile…FX-Strip material using the CrossFile…

or:

… a stainless steel scraper.… a stainless steel scraper.

Use green ski pads or sandpaper Use green ski pads or sandpaper to smooth the repaired spot.to smooth the repaired spot.

4948

1

2

3

4

5

6

7

Use the scraper to remove the old wax, Use the scraper to remove the old wax, applying gentle pressure.applying gentle pressure.

The preparation for racing is the same as for basic preparation (surface grinding, bevelling, relief-grinding of edges, base waxing, see pages 42 onwards).


SuperProPlus WorldCup Ref. No. 24432 p. 20Plastic scraper Ref. No. 20630 p. 28ERGO SideWall Planer Ref. No. 24451 p. 22SteelEdge WorldCup Ref. No. 24475 p. 22RacingFile (L-Mini) Ref. No. 20524 p. 24 Alternatively: Carve Edge HardMetalFile Ref. No. 24457 p. 23DiamondFile Blue Ref. No. 24467 p. 25Arkansas true hard Ref. No. 20576 p. 25Grinding rubber Ref. No. 20550 p. 25OvalBrush Steel Ref. No. 24522 p. 30 Alternatively: SpeedBrush Fiber Ref. No. 20670 p. 33HOLMENKOL® base wax p. 15HOLMENKOL® race wax p. 12 /13Digital RacingWaxer Ref. No. 24422 p. 26 Alternatively: SmartWaxer Ref. No. 20603 p. 26 Scraper Ref. No. 20637 p. 28

i

Firmly clamp the ski / board into the Firmly clamp the ski / board into the vise ready to begin preparation.vise ready to begin preparation.

Slightly scrape the side wall prior to edge Slightly scrape the side wall prior to edge grinding using the ERGO SideWall Planer grinding using the ERGO SideWall Planer as needed.as needed.

Clamp the RacingFile into the tool Clamp the RacingFile into the tool (e.g., SteelEdge WorldCup) and grind the (e.g., SteelEdge WorldCup) and grind the side edges to the required relief angle.side edges to the required relief angle.

If needed, pregrind using the If needed, pregrind using the CarveEdge Hard MetalFile.CarveEdge Hard MetalFile.

Use the DiamondFile Blue to Use the DiamondFile Blue to polish / deburr the side edges and smooth polish / deburr the side edges and smooth using the Arkansas true hard stone.using the Arkansas true hard stone.

Use the grinding rubber to slightly blunt Use the grinding rubber to slightly blunt the extremely sharp edges in the front and the extremely sharp edges in the front and rear areas.rear areas.

Use the OvalBrush Steel to brush off Use the OvalBrush Steel to brush off wax residues from the structure.wax residues from the structure.

Tip: The better the edge is polished, the longer it remains sharp.

-->CONTINUATION

RACING PREPARATION

5150

9

8

11

12

10

Use the OvalBrush Steel to brush off wax Use the OvalBrush Steel to brush off wax residues from the structure. residues from the structure.

Alternatively, use the SpeedBrush Fiber Alternatively, use the SpeedBrush Fiber to brush off.to brush off.

Apply your choice of race wax. Apply your choice of race wax. Harder waxes with a higher melting point Harder waxes with a higher melting point should be worked in longer to increase should be worked in longer to increase abrasion resistance (adherence).abrasion resistance (adherence).

Allow the ski / board to cool for at least Allow the ski / board to cool for at least 1 to 2 hours. Then scrape the wax from tip 1 to 2 hours. Then scrape the wax from tip to tail using a sharp scraping blade and to tail using a sharp scraping blade and applying gentle pressure.applying gentle pressure.

Tip: In order to get the surface as smooth as possible, repeat this scraping and brushing process once or twice.

Clean the side wall and edge using Clean the side wall and edge using a scraping blade or a scraper.a scraping blade or a scraper.

Cleaning the ski base:Cleaning the ski base:Apply base wax (e.g., Alphamix Yellow, Apply base wax (e.g., Alphamix Yellow, Betamix Red…) …Betamix Red…) …

……iron on…iron on…

……scrapescrape……

……brush off.brush off.

Tip: Apply paste wax to the side (to ensure snow does not stick to the side wall) and polish using CareFleece.

RACING PREPARATION

or:

or:

5352

1

2

3

4

2Evenly apply SpeedPowder Hybrid.Evenly apply SpeedPowder Hybrid.

HOLMENKOL® Speed products are applied after basic preparation (hydrocarbon base wax, HybridFX race wax).


SpeedPowder Hybrid wet / mid / cold p. 5FinishCork Ref. No. 20645 p. 29 Alternatively: Digital RacingWaxer Alternatively: Digital RacingWaxer Ref. No. 24422 p. 26p. 26 Alternatively: SmartWaxer Ref. No. 20603 p. 26 Alternatively: SpeedBrush Fleece Ref. No. 20688 p. 33 OvalBrush Horsehair Ref. No. 24533 p. 30OvalBrush Steel MicroFinish Ref. No. 24523 p. 30CareFleece 50 Ref. No. 24492 p. 18

i

Work in using Work in using FinishCork FinishCork (cork or felt side).(cork or felt side).

Alternatively:

Quickly fix SpeedPowder Hybrid Quickly fix SpeedPowder Hybrid using the wax iron…using the wax iron…

with SpeedPowder Hybrid:

Brush using the OvalBrush Horsehair.Brush using the OvalBrush Horsehair.

In order to reveal the ski microstructure, In order to reveal the ski microstructure, brush the base 2 – 3 times brush the base 2 – 3 times in running direction using the in running direction using the OvalBrush Steel MicroFinish.OvalBrush Steel MicroFinish.

… and iron on…… and iron on…

Alternatively:

Fix using FinishCork and work in using Fix using FinishCork and work in using the SpeedBrush Fleece with max. 1200 rpm, the SpeedBrush Fleece with max. 1200 rpm, applying gentle pressure.applying gentle pressure.

Note: Take care to apply sufficient powder coat. Draw the wax iron across the ski quickly to avoid burning the base!

SPEED PREPARATION

5554

with SpeedBlock:


SpeedBlock wet / mid / cold p. 8FinishCork Ref. No. 20645 p. 29OvalBrush Horsehair Ref. No. 24533 p. 30OvalBrush Steel MicroFinish Ref. No. 24523 p. 30CareFleece 50 Ref. No. 24492 p. 18

i For this application you need the following products:

SpeedPaste Racing Ref. No. 24370 p. 7FinishCork Ref. No. 20645 p. 29OvalBrush Horsehair Ref. No. 24533 p. 30OvalBrush Steel MicroFinish Ref. No. 24523 p. 30CareFleece 50 Ref. No. 24492 p. 18

i

with SpeedPaste Racing:

SPEED PREPARATION

1

2

1

3

4

5

1

2

3

4

5

Work in using FinishCork (cork or felt side).

Rub in SpeedBlock, Rub in SpeedBlock, applying gentle pressure.applying gentle pressure.



Remove any dust residue using CareFleece.Remove any dust residue using CareFleece.

Evenly apply a thin layer of Evenly apply a thin layer of SpeedPaste Racing with a sponge SpeedPaste Racing with a sponge and leave to dry for a few minutes.and leave to dry for a few minutes.

Work in using FinishCork Work in using FinishCork (cork or felt side).(cork or felt side).



Remove any dust residue using CareFleece.Remove any dust residue using CareFleece.

56 57

SPEED PREPARATION STRUCTURE PREPARATION / AFTER THE RACE

11

12

13

14

15

1

2

1

2

3

Remove any dust residue Remove any dust residue using CareFleece.using CareFleece.

In order to reveal the ski microstructure, In order to reveal the ski microstructure, brush the base 2 – 3 times in running brush the base 2 – 3 times in running direction using the direction using the OvalBrush Steel MicroFinish.OvalBrush Steel MicroFinish.


Work in while damp using CareFleece.Work in while damp using CareFleece.Alternatively:Work in using the SpeedBrush Fleece Work in using the SpeedBrush Fleece at a maximum speed of 1200 rpm, applying at a maximum speed of 1200 rpm, applying gentle pressure.gentle pressure.

Evenly spray SpeedFinish onto the ski Evenly spray SpeedFinish onto the ski from a distance of around 20 cm.from a distance of around 20 cm.

with SpeedFinish:


SpeedFinish wet / mid / cold p. 6CareFleece 50 Ref. No. 24492 p. 18 Alternatively: SpeedBrush Fleece Ref. No. 20688 p. 33 OvalBrush Horsehair Ref. No. 24533 p. 30OvalBrush Steel MicroFinish Ref. No. 24523 p. 30

i

Structure preparation using Trimaxx


Trimaxx – Alpine structure tool Ref. No. 20642 p. 29OvalBrush Steel MicroFinish Ref. No. 24523 p. 30

i

Mark the structure after waxing!Mark the structure after waxing!

Mark the whole length of the structure Mark the whole length of the structure along one side, applying even pressure. along one side, applying even pressure. Turn the tool and repeat the process for Turn the tool and repeat the process for the other side of the ski to ensure the the other side of the ski to ensure the whole width of the ski is marked.whole width of the ski is marked.

Then slightly rework using the Then slightly rework using the OvalBrush Steel MicroFinish.OvalBrush Steel MicroFinish.

After this race is before the next one


OvalBrush Horsehair Ref. No. 24533 p. 30Digital RacingWaxer Ref. No. 24422 p. 26 Alternatively: SmartWaxer Ref. No. 20603 p. 26 HOLMENKOL® base wax p. 15

i

Note: Note: After using the ski / board (race / After using the ski / board (race / training), brush off the base and training), brush off the base and apply base wax (do not scrape).apply base wax (do not scrape).

5958

It is no surprise that ski waxing used to be considered almost a black art, comparable with the secrets of medieval alchemists: Snow is infinitely variable, just like nature itself. Its consistency depends on a range of factors like temperature, air humidity, age, and crystalline structure. Advanced ski wax today makes it easy even for beginners to make the right choice, always provided that he or she gets a true picture of the condition of snow and potential changes during the day.

If you want to properly prepare your skis, you need to know all about snow!

Temperature

HOLMENKOL® was the world’s first wax manufacturer to take into account air temperature, snow temperature, type and structure of snow as well as snow and air humidity when developing glide wax. The application temperature of HOLMENKOL® glide wax refers to the snow temperature. Due to its higher thermal capacity, the temperature of snow changes much more slowly than that of air, which means that it is more stable even under extreme climatic conditions (e.g., foehn winds).

Please note that air and snow temperatures may differ strongly.

Snow structure and humidity

The structure of the snow gives important pointers for selecting the best wax. Snow granularity and snow moisture both have an impact on the friction and suction of the base. HOLMENKOL® differentiates between fresh snow, fine- / coarse-grained, old snow and artificial snow. These snow types can be dry, damp or wet. Each of these combinations has an influence on wax selection. For instance, under certain conditions, snow can be very damp, but made up of hard, sharp crystals. For this type of snow, a wax is needed which is highly re-sistant to abrasion, as well as highly water repellent.

ALL ABOUT SNOW

6160

HOLMENKOL® acknowledged the importance of snow consistency to wax development by introducing hybrid technology.

Fresh snow Snow at the dew point Old snow

This is a simplified description of four basic snow types:

ALL ABOUT SNOW

Crystalline, unaltered snowflakes with delicate crystals. These snowflakes are harder when it is cold and softer when temperatures are milder. The delicate crystals are easily pressed when gliding and produce a friction and suction effect which can be reduced using an appropria-te wax formula and suitable base structure.

Fresh snow

This has already undergone one or more transformation processes due to temperature changes, which have caused the outer crystal tips to melt or tear off so that a granular structure is produced. This kind of snow has a lower suction effect but greater friction effect than fresh snow. Depending on the temperature, the snow can be damp and soggy or dry if it is cold and windy.

Fine-grained snow (old snow)

This type of snow has lost its original shape as the result of several freezing and melting processes and is defor-med into a snow grain, that is, it has become metamor-phous. Most frequent grain sizes range from 1 to 3 mm. The best known coarse-grain snow types are firn and snow crust.

Coarse-grained snow (old snow)

The abrasive character of this kind of snow creates a challenge for waxing staff. Due to its high density and in-homogeneous shape, this snow is very dull and requires a wax with very high abrasion resistance. A number of transformation processes cause the snow surface to change to crystalline shapes, which enhances the gli-ding properties and means a softer wax can be used. Despite its unwelcome properties, this is the most com-mon snow type in international competitions.

Artificial snow

0,5–1,5 0–0,5 0,5–1,5

vorne5–10 cm

hinten5–10 cm

87

6362

4. Finishing the edge

Freshly ground and extremely sharp edges on the ski / board tail and in the tip area impair turnability of the ski / board and easily lead to a loss of control. Therefore edges are slightly blunted in the tail and tip areas over a length of 5 to 15 cm (using a grinding rubber). The edge grip remains, yet the ski / board is easy to turn. Edges on the tail and tip ends of the ski / board which do not affect the handling characteristics of the ski or board (those parts of the edge that are not in contact with the slope when the ski is in a straight position) should be rounded.

5. Repairing the edge

Stones on the slope may cause the edge to harden as the contact between edge and stone produces very high temperatures for a short time. Thus, the edge surface is transformed and becomes more dense than the surrounding material. Conventional files barely remove these spots, and this results in imprecise work. Rigidification can only be effectively removed using a DiamondFile blue or an aluminium oxide stone. Rework using a DiamondFile green or red.

Edge tuning consists of the following worksteps:

1. Inspecting the running surface2. Tuning the edge lower side (running surface)3. Tuning the side edge4. Finishing the edge5. Repairing the edge

2. Tuning the edge lower side (= bevelled edge)

Ski / board edges should be ground to create a bevelled edge at the tip and tail. This helps significantly in improving turnability. (24450 Base Edge File Guide)

1. Inspecting the running surface

The running surfaces should be checked time and again (using a straightedge). Their appearance may be as follows:

1.1 Concave running surface The base is hollow towards the inside. The edges are in contact with the ground, the ski / board does not turn easily and tends to break out.

1. 2 Convex running surface The base is cambered towards the outside. The edges are not fully in contact with the ground and the ski / board is hard to control.

1. 3 Straight running surface The running surface forms a plane from one edge to the other. The ski / board base and edge are fully in contact with the ground and can be easily controlled and turned provided the edges are properly tuned. If the ski / board is not straight, we recommend that you have it ground by a qualified ski service.

3. Tuning the side edge (= relief)

The side edges are precisely relief-ground using edge grinders. The angle may differ depending on the discipline (e.g., downhill / Super G / giant slalom: 88° - 87°, special slalom 88° - 86°). In order to precisely grind the side edge, use professional edge grinders (e.g., SteelEdge WorldCup or CarveEdge).

ALL ABOUT EDGES

tip5 – 10 cm

tail5 – 10 cm

0.5 – 1.5 0.5 – 1.50.0 – 0.5

6564

Advanced ski / board coatings mustcomply with various requirements: They should be elastic yet resist maximum loads. Therefore today it is mainly sintered bases which are used for racing. Sintered bases can be produced using various additives, and each type offers special benefits to match the par-ticular conditions.

Transparent sintered base

This base offers maximum tenacity (without affecting wax absorption capacity).

Graphite base

Graphite protects the base from dirt thanks to its antistatic properties. Good thermal conductivity gives good gliding properties, particularly on wet snow.

Multi-sintered base

(Different molecular weights of the various components.) Multi-sintered bases have outstanding all-round properties (i.e., they can be used for cross-country skis, downhill skis and snowboards) as they give good gliding properties at all temperature ranges.

The base structure (contact surface between ski / board and snow surface) im-pacts the gliding properties of the ski. During gliding, the snow crystals produce friction and the water contained in the snow leads to suction.

With special base structures, these effects can be reduced or eliminated com-pletely. Base structures can be produced using grinding stones or belts and are are offered by qualified sportswear outlets.

ALL ABOUT BASES ALL ABOUT STRUCTURES

Examples of base structures (Reichmann, Wintersteiger, Montana)

Linear structure

“M”structure

Offset cross structure

General tip: Cold snow / new snow: fine structureOld snow / artificial snow / damp snow: medium structureWet / coarse snow: rough structure

6766

For all HOLMENKOL® base, race and speed waxes, information on the processing temperature is included on the packaging. As with any work in the workshop, there are some safety measures and rules which should be observed:

Ensure the workshop is well-ventilated.

Do not expose wax to naked flames or equipment with revealed heating wires.

Do not smoke whilst working.

Only use special wax irons.

Do not exceed the specified wax temperature. (Avoid smoke forming.)

Race waxes should be ironed at between 115° C and 140° C, SpeedPowder at between 150° C and 160° C. Higher temperatures are not needed.

HOLMENKOL® SpeedPowder is NON toxic and DOES NOT harm the environment. At temperatures above 165° C, however, toxic compounds may be produced. Therefore avoid naked flames, materials that are glowing hot or equipment with revealed heating wires during work. When working in and brushing off waxes, particulate matter may be produced. Ensure sufficient ventilation during handling and use a mask or other respiratory protection if possible, especially when brushing off.

When using spray products, make sure the workshop is sufficiently ventilated. Do not inhale the spray fog.

When using base cleaners, make sure the workshop is sufficiently ventilated. Never directly inhale vapours.

SAFETY MEASURESDURING WAXING

68 69

Stunning views from the slopes! HOLMENKOL® would like to express their

thanks to the Kitzsteinhorn / Kaprun glacier region for their co-operation.

You can view the videos showing how to deal with waxing and preparing on our website:www.holmekol.com/Erlebniswelten/Snow.

In addition, we offer ski waxing seminars, led by our World Cup experienced service staff, in conjunction with sportswear outlets and ski clubs. For more information, please contact: [email protected], phone: (+49) 7156-6101-100 or your sportswear outlet.

APPLICATION VIDEOS / SEMINARS

Supporting children:

HOLMENKOL® supports “Right To Play”, a nongovern-mental organization (NGO) committed to improving the lives of the most disadvan-taged children and their communities through sport.

www.righttoplay.com

7170

MEMO

holmenkol race guide alpine

Documents