home control motion sensor - devolo.de
TRANSCRIPT
Home Control Motion Sensor
first steps
2
Thank you for placing your trust in this devolo product.ons for later reference.
in damage.
e Home Control online help
l Motion Sensor is com-eable parts!
he basic requirements of t provisions of the Radio and designed for use in the EU, luded.
Carefully read all instructions before setting up the device and store the instructi
Icons Very important note. Failure to observe this note may result
Important note that should be observed.
Background information and configuration tips for your device.
Intended useUse the Home Control Motion Sensor as described in these instructions and in thto prevent damage and injuries.
Except for occasional battery replacement, the Home Contropletely maintenance-free. The device contains no user-servic
CE conformityWhen used as intended, the product conforms to tthe directives 2014/53/EU, 2014/35/EU and the other relevanTelecommunications Terminal Equipment Act (FTEG) and is Switzerland and Norway. A printout of the CE declaration is inc
3
devolo Home Controlf electrically operated indoorss standard.
e Home Control Central Unitotion Sensor and all otherthe my devolo app and at
t, please refer to the instal-
hone/tablet)
Central Unit.
l Unit.
me Control devices, as well.
Home Control (also known as home automation) refers to the specific control ohousehold devices. The Home Control system by devolo uses the Z-WaveTM wirele
A Home Control system requires a Z-WaveTM-compatible control unit such as thfrom devolo. Use its Home Control portal to coordinate the Home Control MHome Control devices. You can access the Home Control Central Unit through www.mydevolo.com in a browser.
For more information about setting up the Home Control Central Unilation guide and/or Home Control online help.
Accessing the Home Control Central Unit via the my devolo app (for smartp
Open the my devolo app � Home Control and select your Home Control
Accessing the Home Control Central Unit via web browser (PC/laptop)
At www.mydevolo.com � Home Control select your Home Control Centra
For more information on the control and configuration of all devolo Hoas application examples, please refer to the Home Control online help
4
5
The Home Control Motion Sensormovements in an angle of 80nsor can also be an impulsehas an integrated LED and a
or functions, refer to the
The Home Control Motion Sensor measures brightness and temperature. Detects degrees horizontally and in a distance of up to 8 metres. The integrated light setransmitter for the light controls. Furthermore, the Home Control Motion Sensor release button.
For more detailed descriptions of the Home Control Motion SensHome Control online help.
Sensor
Red LED
Release button(see rear side of the device)
6
Batteries
peratures. Avoid direct
that are only in storageevice!
t. Using the battery in-
123(A) lithium battery. Forl online help.
lo Home Control Central
light or radiant heat!
tion you would like it to be
e description in the section Unit and select Devices �
Always keep batteries away from open flame and high temsunlight and heat radiation!
Always remove all batteries from battery-operated devices and are not in use. Old batteries can leak and damage the d
Do not use rechargeable batteries!
When inserting the battery, make sure the polarity is correccorrectly can damage the device!
The Home Control Motion Sensor requires a commercially available CRinformation on replacing the battery, please refer to the Home Contro
Registering the Home Control Motion Sensor on the control unit (e.g. devoUnit)
Only use the Home Control Motion Sensor indoors.
Avoid placing the Home Control Motion Sensor in direct sun
� Without installing it, place the Home Control Motion Sensor near the loca(such as a door frame or passageway).
� When you use the Home Control Central Unit from devolo, follow thdevolo Home Control on page 3 to call up your Home Control Central
7
Add device � devolo Home Control Motion Sensor. Follow the instructions in the Home Control
urface so that the blackhe device is mounted.
d location, test whether thesitioned optimally.
n Sensor, adhere the tapee sensor and attach the
water or power lines in
portal for logging into your Home Control Central Unit.
Installing the Home Control Motion Sensor
Install the Home Control Motion Sensor on a flat and level srelease button on the rear of the sensor is depressed when t
� Before permanently fastening the Home Control Motion Sensor at the desiresensor can be triggered. If the LED flashes when passing by, the sensor is po
� If using the double-sided tape to fasten the Home Control Motiostrip to the centre (below the release button) on the rear of thHome Control Motion Sensor to the desired location.
If installing to a wall using screws, make sure that no gas, the wall get damaged. There is a danger of electric shock!
8
� If you use screws to attach the Home Control Motion Sensor, take apart the upper and lowerrelease the housing compo-
to the desired location and
provided for this purpose
, and �) onto the lowerme Control Motion Sensor.
Home Control portal of theconfiguration of all devolo Home Control online help.
housing component of the sensor by pressing the tab down � in order to nents (from top to bottom, � and ).
� Based on the template on the lower housing component, drill holes inattach the lower component of the sensor using screws.
� Insert the bottom end of the upper housing component into the groovein the lower component.
� Subsequently, insert the entire upper component (from bottom to topcomponent as far as it will go. This completes the installation of the Ho
From now on, you can take electronic control conveniently using the Home Control Central Unit. For more information on the control and Home Control devices, as well as application examples, please refer to the
9
Service and warranty
the warranty period, pleaseair or warranty claim for you.
on the devolo website.
f with the household waste. int or at the retailer (e. g.
Warranty: 3 yearsIf your devolo device is found to be defective during initial installation or withincontact the vendor who sold you the product. The vendor will take care of the repThe complete warranty conditions can be found at www.devolo.com/warranty.
* Detailed information about the actual costs of the telephone calls can be found
DisposalNeither the Home Control Motion Sensor nor the battery may be disposed oInstead, you can return these at no charge at your municipal collection posupermarket, specialist shop).
Great Britain +44 203 0241 838 * supp
Portugal +351 707 200 896 * supp
Spain +34 902 887 682 * supp
Sweden +46 771 400 480 * supp
Other countries +49 241 70 525 18 * supp
10
11
devolo AGCharlottenburger Allee 6052068 Aachen – Germanywww.devolo.com 44
467/
0516