home - exterior building solutionsexterior building …€¦ · web viewgutter straps included...

ANCHOR-TITE FASCIA

Competitive Advantage in Roofing Industry :

1. Usually involved with Specifications allowing communication with Architect to hold spec and guarantee it will be on project

2. No-Stripping In during Installation 3. Welded Accessories (Bar Only)4. Next Day Shipping on 15 Kynar Finishes5. Lifetime Warranty – 215 MPH Wind Warranty6. Extruded Bar secures roof and Kynar Cover can be ordered later once color is approved7. FM – ANSI/SPRI ES-1 Tested

Disadvantages in Roofing Industry:

1. Can’t lie in the Water Line due to its low rise profile2. Due to Lifetime Warranty & Testing, the Cost might not be competitive on some projects3. Limited Fascia Face sizes available due to Extruded Bar4. Lack of Flexibility with Extruded Bar if on a project with poor construction

Anchor-TiteFully Adhered or Mechanically attached single-ply

We supply stainless steel fasteners (unless they tell us they need masonry fasteners, then we supply masonry fasteners)

o #9 x 2” Stainless Steel fasteners 12” O.C. Standard cover material 24 Ga and .040”

o Cover lapped Product ID

o AF-40o AF-55o AF-70o AF-85

AF-70 & AF-85 have two fastener holes Lifetime 215 mph wind warranty Miami-Dade Approved FM Approved 1-645 ANSI/SPRI ES-1 design pressure of 290 psf Alternate to coping, more economical Bar miter corners have a cut out for excess membrane, two piece miter cover Can do radiuses Scuppers (both tapered and flat)

o Downspout Scupperso Spillout Scupperso Overflow Scuppers

Anchor-TiteStone ballast single-ply


o #9 x 2” Stainless Steel fasteners 12” O.C. Standard cover material 24 Ga and .040”


o AFB-50o AFB-65o AFB-80

AFB-80 has two fastener holes Lifetime 215 mph wind warranty FM Approved 1-645 ANSI/SPRI ES-1 design pressure of 290 psf Bar miter corners have a cut out for excess membrane, two piece miter cover Can do radiuses Scuppers (both tapered and flat)


Anchor-TiteBuilt-up or Modified


o #9 x 2” Stainless Steel fasteners 12” O.C.

Standard cover material 24 Ga and .040”o Cover lapped

Product IDo AFM-50o AFM-65 o AFM-85

AFM-85 has two fastener holes Lifetime 215 mph wind warranty Miami-Dade Approved FM Approved 1-645 ANSI/SPRI ES-1 design pressure of 290 psf Bar miter corners have a cut out for excess membrane, two piece miter cover Can do radiuses Scuppers (both tapered and flat)


Anchor-Tite HG Fascia (HG stands for Heavy Gauge)Fully Adhered or Mechanically attached single-ply



Standard cover material .050” and .063”o Splice Plate provided

Product IDo HG-AF-40o HG-AF-55o HG-AF-70

HG-AF-70 has two fastener holes Lifetime 215 mph wind warranty ANSI/SPRI ES-1 tested Alternate to coping, more economical Can do radiuses Scuppers (both tapered and flat)


Anchor-Tite HG Fascia (HG stands for Heavy Gauge)Built-up or Modified



Standard cover material .050” and .063”o Splice Plate provided

Product IDo HG-AFM-55o HG-AFM-70

HG-AFM-70 has two fastener holes Lifetime 215 mph wind warranty ANSI/SPRI ES-1 tested Can do radiuses Scuppers (both tapered and flat)


Anchor-Tite Extended FasciaFully Adhered or Mechanically attached single-ply

We supply fasteners o #9 x 2” Stainless Steel fasteners 12”

O.C.

o ¼” x 1 ¼” Masonry/Wood Fastener 24” O.C. Standard cover material .050” and .063”

o Splice Plate provided Product ID

o AEF-85o AEF-100o AEF-115o AEF-130

Lifetime 215 mph wind warranty Miami-Dade Approved FM Approved 1-270 ANSI/SPRI ES-1 design pressure of 190 psf Can do radiuses Scuppers (both tapered and flat)


Anchor-Tite Extended FasciaBuilt-up or Modified

We supply fasteners o #9 x 2” Stainless Steel fasteners 12”

O.C.o ¼” x 1 ¼” Masonry/Wood Fastener 24”

O.C. Standard cover material .050” and .063”


o AEFM-85o AEFM-100o AEFM-115o AEFM-130

Lifetime 215 mph wind warranty Miami-Dade Approved FM Approved 1-270 ANSI/SPRI ES-1 design pressure of 190 psf Can do radiuses Scuppers (both tapered and flat)


PERMA-TITE FASCIA

Competitive Advantage in Roofing Industry :

1. Offers Snap-On and Crimp-On Versions for desired profiles2. Customization of Fascia sizes due to 24ga Galvanized Waterdam profile3. With 2” Rise and membrane wrapped Waterdam, it will be out of Waterline and

eliminate concern on moisture getting into system.4. 20 Year Warranty – 110 MPH Wind Warranty5. FM Approved / ANSI SPRI ES1 Compliant6. A more cost effective solution compared to Anchor-Tite Fascia

Disadvantage in Roofing Industry:1. 24ga Waterdam is needed to secure roof, wrapped up and over before Cover is secured2. Crimp-On version is very labor intensive for the Roofing Contractor – crimping every 18”3. 2” Rise is higher than the local sheet metal shops 1” rise4. Cost when comparing against a local shops Gravel Stop

Perma-Tite System 200 Fascia Snap-On VersionFully Adhered, Mechanically attached, or Stone Ballast single-ply

FASTENERS BY OTHERS Standard cover material 24ga, .040”, .050” & .063”

o Splice Plates provided Product ID

o FA-50o FA-60o FA-80o FA-95o FA-110o FA-125

20 year 110 mph wind warranty FM Approved 1-195 ANSI/SPRI ES-1 design pressure of 150 psf

Can do radiuses Scuppers (both tapered and flat)


Perma-Tite System 200 Fascia Crimp-On VersionFully Adhered, Mechanically attached, or Stone Ballast single-ply

FASTENERS BY OTHERS Standard cover material 24

Ga, .040”, .050” & .063”o Splice Plates provided

Product ID o FA-50o FA-65o FA-80

20 year 110 mph wind warranty FM Approved 1-195 ANSI/SPRI ES-1 design pressure of 150 psf Field Crimp kick Can do radiuses Scuppers (both tapered and flat)


Perma-Tite System 200 Fascia Crimp-On VersionFully Adhered, Mechanically attached, or Stone Ballast single-ply

FASTENERS BY OTHERS Standard cover material .050” and .063”


o FA-50o FA-65o FA-80o FA-95 o FA-110 o FA-125

20 year 110 mph wind warranty FM Approved Up to 1-195 ANSI/SPRI ES-1 design pressure of 150 psf Field Crimp kick Can do radiuses Scuppers (both tapered and flat)


Perma-Tite System 300 Fascia Snap On VersionBuilt-Up or Modified

Standard cover material 24 Ga, .040”, .050”, & .063” o Splice Plates provided

Product ID o FA-350o FA-365o FA-380o FA-395o FA-3110o FA-3125

20 year 110 mph wind warranty FM Approved 1-90 ANSI/SPRI ES-1 design pressure of 120 psf Scuppers (both tapered and flat)


Perma-Tite System 300 FasciaBuilt-Up or Modified

Standard cover material 24 Ga, .040”, .050”, & .063”


o FA-355o FA-370

20 year 110 mph wind warranty FM Approved 1-90 ANSI/SPRI ES-1 design pressure of 120 psf Field Crimp kick Scuppers (both tapered and flat)


Perma-Tite System 400 Fascia

Built-up or Modified Extruded Aluminum fascia cover


o FA-460o FA-465o FA-475o FA-485o FA-4100o FA-4120

20 year 110 mph wind warranty FM Approved 1-90 Scuppers (both tapered and flat)


Perma-Tite System 500 FasciaFully adhered, mechanically attached or stone ballast single-ply

Extruded Aluminum fascia cover o Splice Plate provided

Product ID o FA-545o FA-560o FA-565o FA-575o FA-585o FA-5100o FA-5120

20 year 110 mph wind warranty FM Approved 1-225 Scuppers (both tapered and flat)


EconoME FasciaFully adhered, mechanically attached or stone ballast single-ply

FASTENERS BY OTHERS Standard cover material 24 Ga

& .040” o Cover lapped

Sizeso 5 ½”o 7”

5 year workmanship warranty

Field crimp kick Scuppers (both tapered and flat)


EDGE SYSTEMS ONECompetitive Advantages in Roofing Industry:

1. ANSI/SPRI ES-1 Compliant to compete against local sheet metal shops2. Next Day Shipping on 15 Kynar Finishes3. 20ga Galvanized Waterdam secures the roof, Cover can be sent later on4. Priced to compete against local sheet metal shops5. Spring loaded system (every 4’ on Center) to allow for snap on Cover6. Created to work directly with Roofing Contractor7. Distributors can Stock rail for quick access to Contractor

Disadvantages in Roofing Industry:1. Not FM approved2. Limited Warranty on system3. Local Sheet Metal shop can manufacture a cheaper Gravel Stop4. No true Coping design – continuous cleat version5. Distributors can price themselves out of market with large mark-ups

One Edge – Single PlyFully adhered, mechanically attached Single Ply Version

FASTENERS BY OTHERS

Standard Cover Material 24 GA & .040” Size

o 4”o 5”o 6.5”o 8”

10 Year / 72MPH Wind Warranty Scuppers (both tapered and flat)


ANSI/SPRI ES-1 design pressure of 200 psf

One Edge – Built Up or Modified VersionFully adhered, mechanically attached Single Ply Version

FASTENERS BY OTHERS Standard Cover Material 24 GA & .040” Size

o 5”o 6.5”o 8”




One Edge – Stone Ballast Single Ply VersionFully adhered, mechanically attached Single Ply Version

FASTENERS BY OTHERS Standard Cover Material 24 GA & .040” Size

o 5”o 6.5”o 8”




DESIGNER SERIESWorking with our Research & Development Committee and designs brought to us by the Architectural Industry, we created a group of unique profiles to meet our customer needs. We take great pride in our custom capabilities and know we can meet every customer requests

when they approach us. These designs are based around our standard Anchor-Tite Extruded bars as well as the Extended Face Anchor-Tite designs.

Designer Bullnose FasciaFully Adhered or Mechanically attached single-ply



Standard cover material 24 Ga and .040”o Cover lapped

Product IDo BAF-40o BAF-55o BAF-70 o BAF-85

BAF-70 and BAF-85 have two fastener holes

The 20 Year, 110 mph Wind Warranty is available on orders to meet a project's specification.

FM Approved 1-120 ANSI/SPRI ES-1 design pressure of 290 psf Bar miter corners have a cut out for excess membrane, two piece miter cover Scuppers (both tapered and flat)


Designer Bullnose FasciaBuilt-up or Modified



Standard cover material 24 Ga and .040”


o BAFM-50 o BAFM-65o BAFM-80

BAFM-80 has two fastener holes The 20 Year, 110 mph Wind Warranty is

available on orders to meet a project's specification. FM Approved 1-120 ANSI/SPRI ES-1 design pressure of 290 psf Bar miter corners have a cut out for excess membrane, two piece miter cover Scuppers (both tapered and flat)

o Downspout Scupperso Spillout Scuppers

o Overflow Scuppers

Designer Cornice FasciaFully Adhered or Mechanically attached single-ply

We supply fasteners o #9 x 2” Stainless Steel fasteners

12” O.C. o ¼” x 1 ¼” Masonry/Wood

Fastener 24” O.C. Standard cover material .050”

and .063” o Splice Plates provided

Product IDo AEF-CS85o AEF-CS100o AEF-CS115o AEF-CS130


Designer Shadow Line FasciaFully Adhered or Mechanically attached single-ply

We supply fasteners o #9 x 2” Stainless Steel fasteners

12” O.C. o ¼” x 1 ¼” Masonry/Wood Fastener

24” O.C. Standard cover material .050” and .063”


o AEF-SL85o AEF-SL100o AEF-SL115o AEF-SL130


Coping: The covering piece on top of a wall exposed to the weather. It is usually made of metal, masonry or stone and is sloped to carry off water and is used to waterproof the top of a parapet wall or curb condition.

- Anchor Clip: A formed aluminum or galvanized steel attachment clip (chair) used for securing 12'-0" coping sections to the top of a parapet wall or curb condition.

- Cover Plates: Formed metal pieces ranging from 3½" to 8" wide which are installed over the joints of abutting gravel stops, copings, gutter and counterflashings to prevent water entry and maintain joint integrity.

- Parapet: A perimeter wall which extends higher than the roof level.- Splice Plates: Formed metal pieces ranging from 3½" to 8" wide which are installed

underneath the joints of abutting gravel stops, copings, gutters and counterflashings to prevent water entry and maintain joint integrity. Splice plates provide a more aesthetically pleasing appearance than cover plates

Anchor-Tite Coping We supply fasteners


Standard cover material .050” & .063” o Splice Plates provided

All accessories are welded Lifetime 170 mph wind warranty FM Approved ANSI/SPRI ES-1 tested Miters End Caps

Perma-Tite CopingTapered Version

Standard cover material 24 Ga, .040”, .050” & .063”

o Splice Plates provided Unless otherwise noted, all accessories

are Quicklock 20 year, 110 mph wind warranty Miami-Dade approved FM Approved ANSI/SPRI ES-1 tested Can do quicklock or welded radius Miters End Caps

Perma-Tite CopingFlat Version


o Splice Plates provided Unless otherwise noted, all accessories are Quicklock 20 year, 110 mph wind warranty Miami-Dade approved FM Approved ANSI/SPRI ES-1 tested Can do quicklock or welded radius Miters End Caps

Perma-Tite CopingOver 6” to 12” face height tapered version


o Splice Plates provided Unless otherwise noted, all accessories are

Quicklock 20 year, 110 mph wind warranty ANSI/SPRI ES-1 tested FM Approved Miters End Caps

Perma-Tite Double Tapered Coping Standard cover material 24

Ga, .040”, .050” & .063” o Splice Plates provided

Unless otherwise noted, all accessories are Quicklock

20 year, 110 mph wind warranty Miters End Caps

EconoME Coping Tapered Version

FASTENERS BY OTHERS Standard cover material 24 Ga, .040”, .050” & .063”

o Splice Plates provided Unless otherwise noted, all accessories are Quicklock 5 year workmanship warranty Miters End Caps

Edge Systems One Coping FASTENERS BY OTHERS Standard cover material 24 Ga & .040”

o Splice Plates provided Unless otherwise noted, all accessories are Quicklock 10 Year / 72 MPH Wind Warranty Miters End Caps

Designer Series Coping

Bold Face Coping

Provided in 4’ Lengths

Standard cover material 24 Ga, .040”, .050” & .063” o Splice Plates provided

Unless otherwise noted, all accessories are Quicklock 20 year, 110 mph wind warranty Miami-Dade approved FM Approved ANSI/SPRI ES-1 tested Miters End Caps

Bull Nose Coping



Unless otherwise noted, all accessories are Quicklock 20 year, 110 mph wind warranty Miami-Dade approved FM Approved ANSI/SPRI ES-1 tested Miters End Caps

Stone Look Coping



Spatter Coated to match Existing Stone Finish Unless otherwise noted, all accessories are Quicklock 20 year, 110 mph wind warranty Miami-Dade approved FM Approved ANSI/SPRI ES-1 tested Miters End Caps

Gutter/Downspouts: A water carrying device at the roof edge used to collect rain water and melting snow from a roof surface. Manufactured in a material thickness starting at .040" and 24 ga. G-90 galvanized steel or greater. /***A formed metal tube used to carry water from a roof level, scupper/collector box or gutter system to the ground. Closed downspout is capable of transporting large volumes of water. Open face downspout is used where ice or debris clogging causes potential maintenance problems.***

- Elbow: An angled section of downspout fabricated as an accessory item for downspout direction changes. Available in 90° or 45° versions (standard), in Style A (angled away or perpendicular to the wall), or Style B (angled parallel to the wall).

- Expansion Joint/Gutter: A gutter accessory item which allows for substantial thermal movement of a gutter system, particularly in large seamless runs where joints are spaced greater than 12'-0" apart.

- Outlet: A short metal tube which is installed into an opening in the bottom of a gutter or downspout scupper. Used as a transition between the downspout sections and the water collecting system. [also known as drop tube or drop]

http://www.metalera.com/WorkArea/linkit.aspx?LinkIdentifier=id&ItemID=224


- Slotted Drain Bar: A heavy gauge perforated steel or aluminum bar, mounted at the perimeter edge of a building (usually above or in conjunction with a gutter system) allowing water to flow over the roof edge while retaining ballast, debris or pavers on the roof (Dutch gutter, flow through gravel stop, drain bar).

Seal-Tite Industrial Gutter (IG-B) Box Version

Standard cover material 24 Ga, .040” , .050” & .063” Only Factory Mutual 1-90 Gutter in Industry 5 Year Workmanship Warranty Gutter Straps included Miters End Caps

Seal-Tite Industrial Gutter (IG-1) Version


Seal-Tite Industrial Gutter (IG-2) Version



Industrial Downspout – Closed Face Version

Standard cover material 24 Ga, .040” , .050” & .063” 5 Year Workmanship Warranty Hangers included Outlets Elbows Transitions

Industrial Downspout – Open Face Version

Standard cover material 24 Ga, .040” , .050” & .063” 5 Year Workmanship Warranty Hangers included Outlets Elbows Transitions

Roof to Roof Expansion Joints

Standard cover material 24 Ga, .040” & .050” 5 Year Workmanship Warranty Special articulatory cleat allows four-way movement Concealed Splice provided Miters End Caps

Roof to Wall Expansion Joints

Standard cover material 24 Ga, .040” & .050” 5 Year Workmanship Warranty Special articulatory cleat allows four-way movement Concealed Splice provided Miters End Caps

Garden-Tite Drain Bar

Standard cover material .063”, .080”, 125” Mill 5 Year Workmanship Warranty 5/16” drain slots provide optimal drainage Radius & specially fabricated products available Splice are included

Garden-Tite Inspection Chamber

Only available in .063 Mill Finish (Custom Finish) 5 Year Workmanship Warranty 5/16” drain slots provide optimal drainage Removable cover allows for easy access Optional extenders available

Accessory Products:

- End Cap: A welded or quicklocked metal piece used to close off or cap an unfinished end of sheet metal flashing.

- Miter (Inside & Outside): A fabricated accessory sometimes referred to as a corner, usually installed at the intersection of two walls; it is produced by cutting or bending two pieces of material and seaming them together.

- Scupper: An opening in the side of a wall or sheet metal edge detail which allows water to drain from the roof surface. Overflow scuppers are used as a secondary drainage method in case of interior drain blockage. Spillout scuppers allow water to run directly over the edge of a building onto another roof level or the ground. A downspout scupper (sometimes referred to as a collector or conductor head) channels water into a downspout which carries rain water to the ground or to a lower roof level.

- T-Miter: A steel or aluminum sheet metal product which is used at the junction of two parapet walls, where one wall terminates perpendicularly into a continuous second wall.

- Transition Miter: A steel or aluminum sheet metal product which is utilized at the junction (corner) of two parapet walls of different wall thickness.

Termination Bars

Standard cover material 24ga Steel & .040” Alum 5 Year Workmanship Warranty 6063-T6 Extruded Alum provides long term

membrane terminations Snap on Cover conceals fasteners

1 Piece Counterflashing – Reglet Version

Standard material 24ga Steel, .040” & .050”Aluminum 5 Year Workmanship Warranty Standard sizes:

o 3.75”o 5.25”



1 Piece Counterflashing – Surface Mount Version

Standard material 24ga Steel, .040” & .050” Aluminum 5 Year Workmanship Warranty Standard sizes:

o 3.75”o 5.625”

2 Piece Counterflashing – Reglet Version

Standard material 24ga Steel, .040” & .050” Aluminum 5 Year Workmanship Warranty Standard size:

o 5”” Receiver can be removed and reinstalled at any time Snap on design provided in 12’ lengths with pre-punched holes

2 Piece Counterflashing – Surface Mount Version

Standard material 24ga Steel, .040”& .050” Aluminum 5 Year Workmanship Warranty Standard size:

o 5”” Receiver can be removed and reinstalled at any time Snap on design provided in 12’ lengths with pre-punched holes

Brick Wall Cap

Standard material 24ga Steel, .040”, .050” & .063 Alum 5 Year Workmanship Warranty Custom sizes 22ga Galv Continuous Cleat

Soffit Cleat

Standard Material 24ga Steel, .040”, .050” & .063 Alum 5 Year Workmanship Warranty Offers maximum flexibility with sizes matching job needs 3.5” concealed splice plates prevent migration

WARRANTIES:

Anchor-Tite Fascia/Coping: Lifetime Warranty / 215 M.P.H Wind Warranty

- The Lifetime, 215 mph is available on all Metal-Era manufactured Anchor-Tite products. It covers replacement or repair of any portion of the system that has failed due to a defect in Metal-Era supplied materials. The warranty covers the roof edge for the lifetime of the roof on which it was originally installed.

Perma-Tite Fascia/Coping: 20 Year Warranty / 110 M.P.H Wind Warranty

- The 20 Year, 110 mph Wind Warranty is available on orders to meet a project's specification. It provides a maximum of 20 years, 110 mph coverage for the repair or replacement of any portion of the roof edge system that has failed due to a defect in Metal-Era supplied materials.

Edge Systems One: 5 Year Workmanship Warranty

- The 5 Year Workmanship Warranty is available on all Metal-Era products. It covers replacement or repair of products that are defective in material or workmanship.

- An optional Warranty is available at 10 Years, 72 mph coverage. Metal-Era will not promote this warranty option but will make it available on a job by job basis.

Kynar Finish: 30 Year Finish Warranty

- The 30 Year Kynar® Finish Warranty is available on all Kynar finish products from our standard selection. It covers the peeling, cracking, excess chalking and fading of the paint finish.

Testing Processes:

Factory Mutual (FM): FM Global offers worldwide industrial and commercial product certification and testing services through FM Approvals. Recognized and respected across the globe, FM Approvals certification assures customers a product or service that has been objectively tested and conforms to the highest national and international standards.

ANSI/SPRI:

Miami-Dade Testing:

Chapter 5 : Architectural Finish Guide/Gauges:

Material: Finishes

- Mill Finish AluminumMill Finish Aluminum is unfinished metal in its raw state, and is widely used as the base material for prefinished sheet metal products. Mill finish aluminum is specified for many exterior applications, however, staining or uneven weathering may result from long term exposure to the elements.

- Galvanized SteelG-90 galvanized steel is the most widely used acceptable exterior grade steel and is the predominant base material for prefinished Kynar coated steel products. G-90 designates that the material has been coated with a minimum of .090 oz. of zinc per square foot, giving

http://www.fmglobal.com/page.aspx?id=50000000

the product excellent corrosion resistance. If used for exterior field painting, this product should be allowed to weather for at least six months to allow for proper paint adhesion.

- Paint Grip SteelThis sheet steel product is recommended where field painting is required on architectural sheet metal products. Sometimes referred to as bonderized or phosphatized, this material is chemically treated with phosphate film, providing for the good adhesion of most exterior grade paints.

- 70% Kynar 500Kynar’s inherent qualities include excellent formability, high abrasion resistance, excellent weathering qualities and resistance to ultra-violet color degradation. Because it is a low friction coating, Kynar is considered a relatively self-cleaning coating with minimal maintenance costs; heavy rains can “wash” the paint surface.

Material: Thicknesses

Steel: 20ga Galvanized .0396 Thickness, Inches22ga Galvanized .0336 Thickness, Inches Available in Kynar 24ga Galvanized .0276 Thickness, Inches Available in Kynar

Aluminum: .040” Alum .564 Weights per Sq Ft Available in Kynar.050” Alum .706 Weights per Sq Ft Available in Kynar.063 Alum .889 Weights per Sq Ft Available in Kynar.080 Alum 1.13 Weights per Sq Ft Post Coat Necessary

.100 Alum 1.41 Weights per Sq Ft Post Coat Necessary

.125 Alum 1.76 Weights per Sq Ft Post Coat Necessary

Stainless: 22 Gauge .0355 Nominal Thickness

24 Gauge .0293 Nominal Thickness

26 Gauge .0178 Nominal Thickness

home - exterior building solutionsexterior building …€¦ · web viewgutter straps included...

Documents