hood tech flares · flares hood tech flying launch and recovery system specifications: typical...

1
FLARES HOOD TECH Flying Launch and Recovery System SPECIFICATIONS: Typical launch sequence, flight time 4 minutes Typical recovery sequence, flight time 3 minutes Cycle time, with battery swap (Launch or Recovery) 10 minutes Cycle time, with battery recharge (Launch or Recovery) 30 minutes Density Altitude (DA) range, tested in 0 to 10,000 ft Temperature range, tested in -20 C to 40 C Wind range, tested in 0-30 knots LAUNCH Complete System Weight (includes 2 multicopters and 2 gen-sets, for redundancy) 450 kg Pallet size (L x W x H) 81 x 45 x 40 inches Expected mass of fixed-wing aircraft “payload” 13-25 kg Operational footprint 4 x 10 meters Setback distance, for personnel 250 feet

Upload: others

Post on 13-Nov-2020

5 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: HOOD TECH FLARES · FLARES HOOD TECH Flying Launch and Recovery System SPECIFICATIONS: Typical launch sequence, flight time 4 minutes Typical recovery sequence, flight time 3 minutes

FLARESHOOD TECH

Flying Launch and Recovery System

SPECIFICATIONS:

Typical launch sequence, flight time 4 minutes

Typical recovery sequence, flight time 3 minutes

Cycle time, with battery swap (Launch or Recovery) 10 minutes

Cycle time, with battery recharge (Launch or Recovery) 30 minutes

Density Altitude (DA) range, tested in 0 to 10,000 ft

Temperature range, tested in -20 C to 40 C

Wind range, tested in 0-30 knots

LAUNCH

Complete System Weight (includes 2 multicopters and 2 gen-sets, for redundancy) 450 kg

Pallet size (L x W x H) 81 x 45 x 40 inches

Expected mass of fixed-wing aircraft “payload” 13-25 kg

Operational footprint 4 x 10 meters

Setback distance, for personnel 250 feet