Website: http://ecclestons.com/

How to Make a Pinboard from Waste Polystyrene

Website: http://ecclestons.com/

Remove the Lid

First of all you need to remove extra lid from you polystyrene box, if you cannot get the lid so cut down the sides of the polystyrene box. You can make several pinboard out of the entire box if you like.

Website: http://ecclestons.com/

Clean the surface

You need to clean your polystyrene surface with warm, soapy water and leave to dry.

Website: http://ecclestons.com/

Create a design

For design, Make your design on the paper before polystyrene then you need to use a pencil with an eraser and gently push design into the polystyrene board.

Website: http://ecclestons.com/

Select a paint color

Put your imagination on the Pinboards by using color and your paint should be acrylic.

Website: http://ecclestons.com/

Select a paint color

Put your imagination on the Pinboards by using color and your paint should be acrylic.

Website: http://ecclestons.com/

Allow to dryHang your polystyrene pinboard in the place and wait for dry this

Website: http://ecclestons.com/

Contact US http://ecclestons.com/