HPLL Demo

How did we get here?• Brainstormed how we would utilize the WAN

• Talked with TEACH about our plan

• Presented this idea to the TRITON Board

• Converted the WAN to HPLL

• Met with the TRITON Tech Coordinators with Scott Schwartz from AT&T

How did we get here?• Presented the Polycom pricing to the

TRITON Board

• Ordered the Polycom units

• Configured the Polycom units

• Tested the HPLL WAN

HPLL Configurations

Blue Box

Port 4 or 7 on the outside of the blue box

1 x 1 Straight through HPLL WAN

1 X 1 through a local network

1 X 1 through a local network

Security??

• The WAN is an open connection

• An option would be installing a firewall

• Another option is VLAN

1 X 1 local network firewall

Multiplexing with a VSX 7000

1 X 3 Connection through the MCU (State Wide Scheduler)

Internet Connection

Configuring the Polycom units• Language setting

• Country setting

• Give the unit a name (CESA 8)

• Add in the IP address (10.184.10.50)

• Add the Gateway address (10.184.10.49)

• Add the Subnet address (255.255.255.248)

Configuring the Polycom units• Change Quality of Service Settings• System• Admin Settings• Network• IP• Quality of Service• Next• Uncheck Dynamic Bandwidth• Set Maximum Transmit Bandwidth to 384• Set Maximum Receive Bandwidth to 384

Any Questions?