Manualfor the

SuperManifestation Program

HYPER SPACE COMMUNICATIONSAND TECHNOLOGIES INTERNATIONAL

Atlanta, Georgia, USABIO ENERGY CORPORATION

Budapest, Hungary

HSCTI - BEC

HSCTI, P.O. Box 1298, Woodstock, GA 30188, USAPhone: (770) 783 0563

BEC - Bio Energy Corporation - Budapest, HungaryPhone: +36 20 468 8180

Copyright© 2008 by Karl Hans WelzAll Rights Reserved. No portion of this manualmay be used without expressed written consent ofthe author.Orgone Generator®, Chi Generator®, Orgonite®,Orgonit™, Orgonita™, Power Radionics™, SuperRadionics™, Super Psionics™, etc., are trademarksowned by Karl Hans Welz. Equally copyrighted (andprotected with internal radionics settings) are theideas and procedures used in the RadionicsPrograms.

Welcome to the Super Manifesta-tion Program.You received this program with a transfer dia-gram. Put the hard copy on your Chi Genera-tor® or next to it, while the .jpg image of thetransfer diagram is running in your program.This transfer diagram operates as a structurallink between program and Chi Generator®.You can establish a structural link from theprogram to yourself by connecting to the ChiGenerator® with one of the the TransferCouples, such as the TC 99, the PBT 69, theRAOPTC or the Chi-Card.

What follows, is a step-by-step introduction tothis program.At first, install the program iteslf, following theinstructions after you insert the Super Mani-festation CD.The next steps are installations of the ChiTransfer, target photos (if desired) and addi-tional background images.First start the program by clicking on the ikonon your desktop.

Then you can view the new features by clickingon the “new feature instructions” button.

Copy Protection Notice in the program

Before you begin to set up the program forspecific operations, it is necessary that youinstall the transfer diagram. The transfer dia-gram is unique for every program. It eithercomes on a separate disk, which also con-tains the manual and additional information.

Click on the “copy transfer” button, and thefollowing window will pop up.

Click the “Start” button and the startup screenwill appear. This screen has two positionsshowing. This program allows you to installup to 22 positions, for each of which you canindicate the function in general and add adescription of the desired effect or target ofthe operation in particular.

Next, you insert the “Structural Link” CD andafter the popup window appears, click on thenumber, which represents the transfer dia-gram (example next page).Similarly you can install new backgrounds andphotos of persons by clicking on “copy back-ground” and “copy target.”You can either copy images from your com-puter or from CD’s.

3

With this, the program is ready to run.

The Supermanifestation Program comes with

Below: Example of the popup window fromthe “Structural Link” CD

Starter Templates and a series of examplesfor import-export. The import-export func-tion allows to share programs with others whomay have sets of images that differ fromyours.

At first we open a Starter Template, then wewill continue with an imported file and finallyYou will set up your own operation.

First, load an operation the following way:(1) click on the button “Load Operation”(2) click the folder “starter templates”(3) Select the area by clicking at the folder.In our example, we click “Creativity” and se-lect the file “artistic creativity.”

4

The following image appears.

Now load the transfer diagram by clicking onthe “load transfer image” button - the popupwindow shows the installed transfer diagram.Of course you can also design your own trans-fers.

With the transfer image loaded, you can startrunning the program as is. When working onyourself and you carry a transfer, you neednot put your picture into the “target” posi-tion. If you identify yourself or any otherperson in the target position, a personal trans-fer is not needed. Of course you need to puton your Chi generator® the laminated trans-fer card that you received with this program.

5

Click the “Start” button and the transfer im-age starts moving from position to position,merging with each of the images in the posi-tions - see below.

To edit the images or to set a target imagewith name, double click the image.

The popup gives you a series of options:(1) You can determine the speed of the move-ment of the structural link to your generator(the transfer image)(2) you can edit the position

(a) by renaming it, and(b) by describing it more accurately.

(3) you can select an image(4) you can use sound for each position(5) you can set up the background to changefrom position image to position image(6) you can show the text(7) you can decide to set radionics rates.You can use the “fast rate set” option or youcan work them by holding the mouse buttondown at each one of the knobs and decidewith a stick pad or pendulum when to releasethe mouse button. Personally I prefer thefast rate setting.(8) you can show the radionic ratesOnce you have it all set up, you update thepositions, which will lead back to the mainscreen.

Below the same operation with the imagesmoved. You move the image by clicking theposition, holding the mouse button down anddrag it to the new position.

Using the background stretch mode, you canexpand the background.

Here a new background image is installed -click the “set background image” button andmake a selection from the popup window -here “Big Money” was chosen.

On “#positions,” we selected “6” and anotherposition appeared, which we dragged to thebottom of the screen - edit it as you wishwith image, text, sound, etc. - your choice -and start the operation.

To save, click the “save operation” button andinstall where you prefer (next column on top).

Now, for practice, export the operation.

enter the name

and go to the import-export folder from “load”to see how it installed. Again, feel free tomake folders and subfolders to match bestyour needs.

Reset - for a new operation.

... and you are ready for a new operation.

6

Click the “load operation” button, then clickthe “Shortcut to Import-Export” button, im-port one of the programs. I have chosen the

chakra balancing.The import function allows programs to betransferred with all images to persons whodo not have the same image files on theircomputer.

Again we move two images

then we add one by increasing the “#posi-tions” by one.

Here we install an image into the new posi-tions, possibly also sound

7

we checkmark “background stretch mode” andexpand the background

Then we install a new background, load thetransfer image

and run the operation.

Setting up your own operation(1) Reset

Set background image to “big money” andset up for 3 positions - you can run up to 22positions.

load transfer image and set the positions intoa triangle - or anyway you like.

8

Click on position 1, insert target person, write“target” and the name of the person.

9

I selected the image of Mars, wrote “target”under “name and in the text box I entered“planet mars.”

Position 2, the “pragmatism” image was se-lected from “business money” in the “9 packsAoD” folder. the position is named “trend 1”and in the text box is “pragmatic attitude to-wards business.”

Position 3, the “self confidence” image wasselected from “business money” in the “9packs AoD” folder. the position is named“trend 2” and in the text box is “Self Confi-dence in business meeting.”

Below the operation, ready to run

... and here it is running.

Additional Suggestions(1) Start with templates and modify themfor your purposes as needed.(2) When setting up your own operations,start with a relatively small number of posi-tions and increase.(3) You can put several targets into the op-eration. This is an advantage when you havea business meeting.(4) You can open more than one program.In fact, you can open as many as the com-puter allows. Important is an additional setupfor equal distribution of energy: 2 positions:Target = all operations runningTrend = equal distribution of energyNaturally, you need a poweful device to runseveral operations simultaneously.Typically, when setting up an operation yougenerate a “thought form” with its structurallinks to targets and trends. Run the programfor 2 - 3 hours approximately, then wait. Youshould have success or at least inroads within2 - 3 days, unless the situation is extremelycomplex. Whenever there is no success, it isimportant that you change the success strat-egies! When inroads are achieved, continuewith the operation by repeating every 1 - 2days.