hvac products

8/12/2019 HVAC Products

1/10

HVAC Products

Selecting the rightcontrol range General

Standard heating

Standard district heating

Standard HVAC (Partial) Standard HVAC (Full)

Thermostats

Programmable systems

Room control

Standard heating SIGMAGYR RVP200, RVP300,RVP500, RVL400

Standard district heating SIGMAGYR RVD100, RVD200, RVL400

Standard HVAC (partial) Synco100/CLASSIC RKN/POLYGYR ACE/AEROGYR

Standard HVAC (full) POLYGYR

Joker/Synco200/Synco 700

Thermostats Heating, Air Conditioning and Monitoring

Programmable systems DESIGO/INTEGRAL RS/UNIGYR/VISONIK

Room control DESIGO RXA, RXB, RXC/PRFA/PRONTO

1


2/10

Selecting the right control rangeGeneral

Siemens Building Technologies

HVAC Products

2004

1-2

Selecting the right control range

All controllers from Building Automation and HVAC

Products are graded according to their range of func-

tions, input/ output configuration and application range.Based upon the functionality required, you simply

select the required controller and field devices and cre-

ate your HVAC scheme.

All devices can be used with a wide range of compatible

sensors, valves, actuators and peripheral devices from

the complete Building Automation and HVAC Products

ranges.

What is a Standard Controller?

The standard control range comprises easy-to-configure

HVAC controllers with preset functionality or precon-

figured application types.

With a standard controller, the user is guided through

the necessary configuration and parameter settings. Set-

ting options include DIPswitches, digital displays, hand-

held service tools or simple graphics, each according to

the controller selected.

What is a System Controller?

The programmable devices from the Building Automa-

tion Division can be tailored to suit specific applications

and building types.

With a programmable system controller, the devices are

usually configured and set to work by SBT engineers or

trained installers. The enduser usually has access to the

necessary settings, information and data via customized

displays and detailed color graphics.

Plant type Description Information

Standard Heating Heating systems produce hot water for space heating and in many cases, d.h.w. Selection chart:

A buildings heating system encompasses the areas of heat generation (boilers), Page 1-3heat distribution (pipework) and heat transfer (heat consumers or radiators). Details:

Chapter 2Standard District District heating is usable thermal energy, which is centrally prepared and Selection chart:

Heating distributed over a large area using a heat transfer medium and a piping

Page 1-4

system. A district heating supply consists of 4 main parts: heat source, Details:

distribution network, substations and the consumer system. Chapter 2Standard HVAC Basic air conditioning plants are used to maintain the room temperature or room Selection chart:

(Partial) humidity at desired levels, to ensure the comfort levels during occupancy. Page 1-5Details:

Chapter 3, 4Standard HVAC Full heating, ventilation and air conditioning plants (HVAC) typically require Selection chart:

(Full) a more advanced control strategy. Full HVAC plants often combine several Page 1-6plant elements in sequence (heating, cooling, humidification, dehumidif ication Details:

and heat recovery) and allow a more defined comfort zone. Chapter 3, 4Thermostats Thermostats are commonly used for individual room control, for pipe and Selection chart:

duct mounting and frost protection. The range covers almost every Page 1-7commonly encountered application in heating, cooling and ventilation. Details:

Chapter 10Programmable Programmable systems are used where tailored solutions are required for Selection chart:

systems heating, ventilation, air conditioning, refrigeration, district heat and electrical Page 1-8plant or individual room control. Details:

Chapter 7, 9Room control Room controllers are used to provide optimal HVAC conditions for each Selection chart:

individual room (space). Page 1-9 / 1-10The RXC range offers in addition lighting and shutter control. Details:

Chapter 8, 9


3/10


HVAC Products

2004

1-3

Selecting the right control rangeStandard heating 11

Heating

Variants

Description

Application

Features

Dimensions

Details

SIGMAGYR

RVP200

RVP200

RVP210

Analog heating controllers

for use in residential or

smaller commercial buildings

that contain their own heat

generating plant.

Weather-compensated

flow or boiler temperature

control, with options for

room influence, time switch

and d.h.w. control.

Panel or wall mounting with

easy-to-use analog operating

elements. Options for room

unit operation, temperature

limitation and ECO energy

saver.

96 mm x 144 mm

Chapter 2

SIGMAGYR

RVP300

RVP300 RVP330

RVP310 RVP331

RVP320

Digital heating controllers

for use in residential and

nonresidential buildings.

Ideal for control of heating

zones, heat producers,

hot water plants or plants

with a district heat con-

nection.

Weather-compensated

flow temperature control

with optimum start/stop.

Suitable for control of 1 or

2 heating zones, boiler and

d.h.w.

The RVP300 controllers use

an operating line method to

display and adjust all param-

eters. Bus communication

allows control and monitor-

ing of interconnected heat-

ing plants.

96 mm x 144 mm

Chapter 2

SIGMAGYR

RVP 500 Series

RVP502

RVP540

RVP550

Digital energy managers

for residential and nonresi-

dential buildings containing

alternative energy plant.

Ideal for the control of heat

producers and the manage-

ment of complex storage

systems.

RVP502 is a solar controller

for optimal control of the

available energy in various

hot water storage systems.

The RVP540/550 are used

with more complex plants

requiring 2 or 3 differentheat producers.

All controllers feature solar

energy yield measurement.

Applications can be select-

ed using a tool to simplify

commissioning or via the

operating line system. Bus

communication is provided

as standard.

96 mm x 144 mm

Chapter 2

SIGMAGYR

RVL400

RVL470 RVL472

RVL471 RVL469

Multifunctional heating

controllers with analog and

digital operating elements,

for use in virtually all types

of buildings.

RVL400 controllers are

configured for all standard

heating, heat generation,

district heating and d.h.w.

applications.

Complete weather-compen-

sated heating control with

demand-dependent boiler

temperature and d.h.w.

control, plus multifunctional

relay output and solar and

wind sensing.

All parameters can be adjust-

ed via the simple user inter-

face, large display and analog

settings. Different user levels

are available plus bus commu-

nication and remote opera-

tion.

Preprogrammed plant types

can be selected, automati-

cally enabling the required

functions.144 mm x 144 mm

Chapter 2


4/10


5/10


6/10

Selecting the right control rangeStandard HVAC (full)


HVAC Products

2004

1-6

POLYGYR

JOKER

RWX62.5030 RWX62.7036

RWX62.7032

RWX62.7034

Configurable universal con-

trollers for control or se-

quencing of HVAC plants.

Universal inputs for analog

or digital signals plus auxil-

iary functions.

All main HVAC variables

can be controlled (tempe-

rature, humidity, enthalpy,

pressure, pressure differen-

tials, air flow and indoor air

quality.

Entering a simple function

code sets the required

application and the required

inputs.

108 x 175 x 73 mm

Chapter 3

SyncoTM 200

RLU210 RLU232

RLU222 RLU236

Universal HVAC controllers

for autonomous control.

Up to 2 controllers in one

devices. Control of all

process variables normally

used in HVAC plant.

Optimized for ventilation

and air conditioning appli-

cations/chilled and hot water

control. The controllers have

proven standard applications

pre-configured, which can

be adapted where required.

Universal signal inputs can

be configured for sensor

signals, such as LG-Ni 1000,

T1, Pt1000, DC 0...10 V, or

switching contact.Straightforward selection

of applications and commis-

sioning via user interface.

Service tool interface for

extended commissioning

functions.

Advanded, cost-saving instal-

lation technique.

124 x 95 x 86 mm

176 x 95 x 86 mm

(L x W x H)

Chapter 4

SyncoTM 700

RMU710 RMH760

RMU720 RMZ..

RMU730

Flexible, communicating HVAC controllers for control and

supervisory functions. Graded choice of functions with

extension modules. Free choice of operation, with operator

station via bus or each controller with a plug-in type or

detached operator unit. Advanced, cost-saving installation

technique.

Optimized for ventilation and air conditioning applications/

chilled water control and heating applications, boiler, heating

zone and d.h.w. control. The controllers have proven

applications preconfigured, which can be adapted where

required.

Universal signal inputs can be configured for sensor signals,

such as LG-Ni 1000, T1, Pt1000, DC 0...10 V, or switching.

contact. Straightforward selection of applications and com-

missioning via user interface. Service tool interface for ex-

tended commissioning functions. Optimum coordination ofapplications via open Konnex bus. Link to electrical plant.

124 x 95 x 74 mm

176 x 95 x 79 mm

(L x W x H)

Chapter 4

HVAC

(Full)

Variants

Description

Application

Features

Dimensions

Details


7/10


8/10

Selecting the right control rangeProgrammable systems


HVAC Products

2004

1-8

DESIGO building automation that persuades

Thanks to their modular design, building automation sys-

tems from the Building Automation Division offer nearly

unlimited choices in terms of operation, monitoring, and

control. The field of use reaches from small autonomousbuildings to extensive and networked building complex-

es. The systems are suited not only for use with typical

HVAC plants, but also with all other types of building

services plant, such as lighting, electrical plant, fire pro-

tection and security.

Our systems protect your investments long-term.

On upgrading projects, we offer interesting migration

options for existing building automation solutions. The

system architecture is open for integrating third-party

systems. As a market leader in the field of building au-tomation, the Division offers full support to building

investors. The present Product Catalog again

demonstrates continuity when it comes to the

implementation of technical innovations.

We wish you continued success with systems from

Siemens Building Technologies.

Programmable

Systems

Description

Variants

Details

INTEGRAL RS

Compact controllers:

NRU (E, F, T)/A

NRK (9, 14, 16)/A

Together with the handheld

operator units and PC opera-

tion INTEGRAL DIALOG,

the INTEGRAL RS system

controllers with their freely

programmable functions

form the DDC control and

control module system

INTEGRAL AS 1000.

Modular controllers:

NRU (A, B, C, D)/A

Chapter 7

UNYGYR

Thanks to its modular sys-

tem concept, UNIGYR can

be optimally matched to

specific requirements.

UNIGYR is also the ideal

and economical solution

for small-scale HVAC plant.

Project-specific:

PRU10

PRU2

PRS10

Chapters 7, 9

VISONIK

Depending on the require-

ments, the modular VISONIK

controllers can be equipped

with different types of com-

munication and memory

cards. They are optimally pre-

pared for establishing links

to large building

management systems.

Modular controllers:

BPS (with SDLC)

NetBPS (with Ethernet)

Chapter 7


9/10


HVAC Products

2004

1-9

Selecting the right control rangeRoom control 1

DESIGO

RXA

RXA20.1/FC-01

RXA21.1/FC-02

RXA22.1/FC-03

RXA29.1/FC-04

Standalone controllers opti-

mized for installation in the

fan coil or in cabinets, etc.

Fan coils:

2-pipe c/o, 4-pipe,

2-pipe with el. heating,

air side control

PI control

Inputs for:

Window switch

Presence detector

Return air sensor

Outputs for:

Electromotoric or thermal

valve actuators

Fan control

QAX3..

QAX9.. room operating units

115 x 140 x 63 mm

Chapter 8

DESIGO

RXB

RXB10.1/CC-01

RXB10.1/VV-01

RXB21.1/FC-06

Room controllers with EIB

communication for HVAC

applications.

Fan coils:

2-pipe c/o, 4-pipe,


air side control

Radiator and chilled ceiling

Single-duct, supply or

extract air VAV

See DESIGO RXB

application library

PI control

Inputs for:

Window switch

Presence detector

Return air sensor

Outputs for:

Thermal, electromotoric or

bus valve actuators

Fan control

DC 010 V output for

VAV controller

QAX3..

QAX9.. room operating units

See details

Chapter 9

DESIGO

RXC

RXC10.1

RXC20.1

RXC21.1

RXC22.1

RXC32.1

Room controllers with LON

communication for HVAC

applications.

Fan coils:

2-pipe c/o, 4-pipe,


air side control

Radiator and chilled ceiling


extract air VAV

See DESIGO RXC

application library

PI control

Inputs for:

Window switch

Presence detector

Return air sensor

Outputs for:


bus valve actuators

Fan control

DC 010 V output for

VAV controller

QAX.. room operating units

See details

Chapter 9

RXC30.1

RXC31.1

RXC40.1

RXC41.1

Modular room controllers

with LON communication forHVAC applications and

lighting and blind control

(RXC30.1/RXC31.1).

Extension modules for ligh-

ting (RXC40.1) or blind

control (RXC41.1). For use

in connection with RXC30.1/

RXC31.1 room controllers.

Radiators and chilled ceiling

Single-duct, supply and/or

extract air VAV

Lighting and blind control

See DESIGO RXC

application library

PI control

Inputs for:

Window switch

Presence detector

Outputs for:


bus valve actuators

DC 010 V output for VAV

controller

QAX.. room operating units

See details

Chapter 9

Room

control

Variants

Description

Application

Features

Dimensions

Details


10/10

Selecting the right control rangeRoom control


HVAC Products

2004

1-10

Room

control

Variants

Description

Application

Features

Dimensions

Details

PRFA

PRFA/A

PRFA-V/A

PRFA-C/A

Standalone controllers,

optimized for installation in

the fan coil or in cabinets,

etc.

Fan coils:

2-pipe c/o, 4-pipe,


air side control

PI control

Inputs for:

Window switch Presence detector

Return air sensor

Outputs for:

Thermal valve actuators

Fan control

108 x 118 x 52 mm

Chapter 8

PRONTO

PRFB-A

PRFB-V

PRVU

Room controllers with

PRONTO bus communica-

tion for HVAC applications,

optimized for installation in

fan coils, cabinets or on the

VAV box.

Fan coils:

2-pipe c/o, 4-pipe,


air side control


extract air VAV with

reheating

PI control

Inputs for:


Return air sensor

Outputs for:


Fan control

Electromotoric dampers

Electrical reheating

Range for room operating

units

108 x 118 x 52 mm

Chapter 9

PRONTO

PRRA

PRRB

PRR

Room controllers with

PRONTO bus communica-

tion for:

HVAC applications, optimized

for wall mounting.

Radiators and chilled ceiling

PI control

Inputs for:


Outputs for:


DC 010 V output for

VAV controller

80 x 135 x 37 mm

Chapter 9

hvac products

Documents