hybrid casement window › ... › 02 › thermalcasem… · trend® windows & doors pty...
TRANSCRIPT
1
Trend thermAL® Hybrid
Casement WindowTECHNICAL DATA
Features & Benefits
Size Range
Ordering Details
Installation
Cross Sectional Views
Trend thermAL® Casement Window | TAC | Mk-1 | 30 Nov 2012
Confidentiality Notice: This document and the information it contains are copyright and confidential to Trend ® Windows & Doors Pty Limited. Disclosure, use and copying in any form whatsoever, except as authorised by Trend thermAL® Windows & Doors in writing, are strictly prohibited. Patents and Design Registrations pending.
1
Please note that drawings are not to scale
Features & BenefitsTrend thermAL® Casement Window
Confidentiality Notice: This document and the information it contains are copyright and confidential to Trend® Windows & Doors Pty Limited. Disclosure, use and copying in any form whatsoever, except as authorised by Trend thermAL® Windows & Doors in writing, are strictly prohibited. Patents and Design Registrations pending.
2Trend thermAL® Casement Window | TAC | Mk-1 | 30 Nov 2012
1 Glazing Trend thermAL® is designed to
accommodate up to 24mm double glazed units for maximum energy efficiency. With over 60 different glazing options there is a solution for any climate in Australia.
Among the lowest u-Values and SHGC available but at a significantly lower cost when compared to similar systems.
U-Value down to 2.5 SHGC ange from 0.53 - 0.27 Cooling Efficiency 66% Heating Efficiency 72%
2 Composition Aluminium external surface for
maximum strength which can be powder coated in a range of standard and designer colours for a bold external finish
Rigid polymer ERP is available in 3 standard steadfast colours to complement internal finishes with a subtle appearance but complementing the external finish.
Rigid polymer ERP internal surface designed to reduce energy transfer for highest energy efficiency
Rigid polymer ERP is impact modified to ensure minimal damage even during construction.
Rigid polymer ERP is pre–stressed to eliminate excessive shrinkage or expansion and is also uV stabilised to withstand the harsh Australian climates
3 Key Lock Scissor Winder Trend thermAL® Casement window
Secura winder mechanism is designed specifically for high performance, security and reliability.
The Secura winder can be used in even the harshest environment without worry of corrosion.
Secura hardware is available in powder coat finishes with stainless steel stay mechanism.
Restricted openers to 100mm are available for safety options.
Keyed lock is standard for added security.
4 Window Placement Care should be taken with locating
opening casement windows in pedestrian traffic areas.
5 Protective Wrapping Protective wrapping for delivery
to site is a standard for all Trend thermAL® products.
6 Options Easy to fit flyscreens can be fitted
and removed from the inside.
Wide range of powdercoat finishes available including timber powdercoat finishes.
ERP Colours Anodic Natural Matt White Matt Stone Beige
Maximum Size Maximum size of single Casement
is 2100mm (h) x 720mm (w)
Bushfire Protection
Xtreme® bushfire protection that has
been tested by CSIRO to BAL–40,
which is fully compliant to AS1530.8.1
within AS3959–2009 is available.e.
Size RangeTrend thermAL® Casement Window
Please note that drawings are not to scale
Confidentiality Notice: This document and the information it contains are copyright and confidential to Trend ® Windows & Doors Pty Limited. Disclosure, use and copying in any form whatsoever, except as authorised by
Trend thermAL® Windows & Doors in writing, are strictly prohibited. Patents and Design Registrations pending.
3Trend thermAL® Casement Window | TAC | Mk-1 | 30 Nov 2012
All windows and doors are designed to 700pa velocity and 200pa water rating. For higher ratings consult Trend® Windows & Doors
NOTES Trend thermAL® casement windows scissor arm opens out from the bottom, giving your home good ventilation – even in wet weather. The sash design offers a wide viewing area, while its excellent sealing qualities ensure added climate control. In gusty conditions, the sturdy scissor winder mechanism prevents the window slamming.
900
956
1000
1056
1200
1256
1365
1421
1800
1851
2100
2151
1800
1856
2100
2156
STUD OPENIN
G
WINDOW
610
666
720
776
1210
1266
1510
1566
1810
1866
2110
2166
2410
2466
2710
2766
TAC0906
TAC1806T
TAC1806
TAC1206
TAC1406
TAC1006
TAC2106
1365
TAC0907
TAC1807T
TAC1807
TAC1207
TAC1407
TAC1007
TAC2107
TAC0912
TAC1812T
TAC1812
TAC1212
TAC1412
TAC1012
TAC2112
TAC0916
TAC1816T
TAC1816
TAC1216
TAC1416
TAC1016
TAC2116
TAC0918
TAC1818T
TAC1818
TAC1218
TAC1418
TAC1018
TAC2118
TAC0922
TAC1822T
TAC1822
TAC1222
TAC1422
TAC1022
TAC2122
TAC0924
TAC1824T
TAC1824
TAC1224
TAC1424
TAC1024
TAC2124
TAC0927
TAC1827T
TAC1827
TAC1227
TAC1427
TAC1027
TAC2127
TAC2106T
1365
TAC2107T TAC2112T TAC2116T TAC2118T TAC2122T TAC2124T TAC2127T
Ordering DetailsTrend thermAL® Casement Window
Please note that drawings are not to scale
Confidentiality Notice: This document and the information it contains are copyright and confidential to Trend® Windows & Doors Pty Limited. Disclosure, use and copying in any form whatsoever, except as authorised by
Trend thermAL® Windows & Doors in writing, are strictly prohibited. Patents and Design Registrations pending.
44Trend thermAL® Casement Window | TAC | Mk-1 | 30 Nov 2012
All windows are illustrated as viewed from outside. Codes shown are for plain windows.
Manufactured from aluminium and Rigid Polymer extrusion.
The first two numbers ofcode indicate approximate height, the last two numbers indicate approximate width.
Sash Style Options:Standard option, eg window codeTAC0906
Configuration Options:L indicates Left Hand HingeR indicates Right Hand HingeF indicates FixedLL indicates Left Hand\Left HandLR indicates Left Hand\Right HandLF indicates Left Hand\FixedRR indicates Right Hand\RightHandFR indicates Fixed\RightHandFF indicates Fixed\FixedLFR indicates Left Hand\Fixed\Right HandLLL indicates Left Hand\Left Hand\Left HandRRR indicates Right Hand\Right Hand\Right HandFLF indicates Fixed\Left Hand\FixedFRF indicates Fixed\Right Hand\FixedLRR indicates Left Hand\Right Hand\Right HandLLR indicates Left Hand\Left Hand\Right HandFFF indicates Fixed\Fixed\FixedT after the size indicates a TransomE indicates Xtreme bushfire windows (located at the end of the code)
Aluminium exterior and Extruded Rigid Polymer (ERP) interior. ERP interior skin is available in three colours - white, anodic natural matt and stone beige.
For information on double-glazing or wind ratings, please contact Trend® Windows & Doors Sales Representative.
InstallationTrend thermAL® Casement Window | Building In Detail | Brick Veneer - 230mm wall
Please note that drawings are not to scale
Confidentiality Notice: This document and the information it contains are copyright and confidential to Trend® Windows & Doors Pty Limited. Disclosure, use and copying in any form whatsoever, except as authorised by Trend thermAL® Windows & Doors in writing, are strictly prohibited. Patents and Design Registrations pending.
5Trend thermAL® Casement Window | TAC | Mk-1 | 30 Nov 2012
TIMBER REVEAL
BRICKWORK
FLASHING BY BUILDER
STUD
STUD
FLASHINGBY BUILDER
FRA
ME
SIZE
STU
D O
PEN
ING
= F
RA
ME
SIZE
+ 6
0mm
BRICK SILL
PACKINGBY BUILDER
FIXINGS AT450mm CENTRES
TIMBER REVEAL
JAMB
SILL SUPPORTBY BUILDER
SILL PLATE
NO PACKING12mm CLEARANCE
STU
D O
PEN
ING
= F
RA
ME
SIZE
+ 6
0mm
FRA
ME
SIZE
10mm MINIMUM CLEARANCE BETWEEN SILL BRICK AND WINDOW SILL WHERE TIMBER FRAME IS USED
10mm CLEARANCEBETWEEN SOFFIT LINING AND WINDOW HEAD
QUAD BYBUILDER
SILL FLAP
SOFFIT LINING
SILL
HEAD
PACKINGBY BUILDER
FIXINGS AT450mm CENTRES
TIMBER ARCHITRAVE BY BUILDER
TIMBER REVEAL
TRIMMER
FLASHINGBY BUILDER
OUTSIDE
HEADER
Please note that drawings are not to scale
InstallationTrend thermAL® Casement Window | Building In Detail | Double Brick - 280mm wall
6Confidentiality Notice: This document and the information it contains are copyright and confidential to
Trend® Windows & Doors Pty Limited. Disclosure, use and copying in any form whatsoever, except as authorised by Trend thermAL® Windows & Doors in writing, are strictly prohibited. Patents and Design Registrations pending.
Trend thermAL® Casement Window | TAC | Mk-1 | 30 Nov 2012
CEM
ENT R
END
ER
FLASHING BY BUILDER
BRICKWORK BRICKWORK
BUILDING IN LUGS AT450mm CENTRES
JAMB
FRA
ME
SIZE
BRICK SILL
FLASHING BY BUILDER
BUILDING IN LUGS AT450mm CENTRES
BRICKWORK
FLASHING BY BUILDER
HEAD
FRA
ME
SIZE
ALUMINIUM ANGLE AND FIXING BY BUILDER
SILL FLAP
CEMENT RENDER
CEMENT RENDER
STEEL LINTEL BY BUILDEROUTSIDE
BRICKWORK BRICKWORK
JAMB
Please note that drawings are not to scale
InstallationTrend thermAL® Casement Window | Building In Detail | Aluminium Cladding on Studs
7Confidentiality Notice: This document and the information it contains are copyright and confidential to
Trend® Windows & Doors Pty Limited. Disclosure, use and copying in any form whatsoever, except as authorised by Trend thermAL® Windows & Doors in writing, are strictly prohibited. Patents and Design Registrations pending.
Trend thermAL® Casement Window | TAC | Mk-1 | 30 Nov 2012
TIMBER REVEAL
ALUMINIUM OR VINYLWALL CLADDING
FLASHING BY BUILDER
STUD
OPE
NING
= FR
AME
SIZE
+ 60
mm
FRAM
E SI
ZE
WEATHERBOARDCLIP OPTIONAL
ALUMINIUM OR VINYL WALL CLADDING
STUD
STUD
JAMB
FIXINGS AT450mm CENTRES
PACKINGBY BUILDER
FLASHING BY BUILDER
TIMBER REVEAL
SILL PLATE
SILL FLAP
FLASHING BY BUILDER
DRESS SARKING INTO CLADDING "U" TRIM AT HEAD AS SHOWN
ALUMINIUM OR VINYLWALL CLADDING
12mm CLEARANCE
STUD
OPE
NING
= FR
AME
SIZE
+ 60
mm
FRAM
E SI
ZEOUTSIDE
NO PACKING
SILL
HEAD
FIXINGS AT450mm CENTRES
PACKINGBY BUILDER
TIMBER ARCHITRAVE BY BUILDER
TIMBER REVEAL
HEADER TRIMMER
Please note that drawings are not to scale
Cross Sectional ViewsTrend thermAL® Casement Window |
88Confidentiality Notice: This document and the information it contains are copyright and confidential to
Trend® Windows & Doors Pty Limited. Disclosure, use and copying in any form whatsoever, except as authorised by Trend thermAL® Windows & Doors in writing, are strictly prohibited. Patents and Design Registrations pending.
Trend thermAL® Casement Window | TAC | Mk-1 | 30 Nov 2012
Casement Single Lite - Double Glazed
JAMB
JAMB
OUTSIDE
5526
53
74
12.547
SILL
OUTSIDE
HEAD
5526
64
53
5712.5
Please note that drawings are not to scale
Cross Sectional ViewsTrend thermAL® Casement Window |
99Confidentiality Notice: This document and the information it contains are copyright and confidential to
Trend® Windows & Doors Pty Limited. Disclosure, use and copying in any form whatsoever, except as authorised by Trend thermAL® Windows & Doors in writing, are strictly prohibited. Patents and Design Registrations pending.
Trend thermAL® Casement Window | TAC | Mk-1 | 30 Nov 2012
Casement with Fixed Low Lite - Double Glazed
HEAD
OUTSIDE
SILL F
TRANSOM
5526
64
5392
53
3431 31
Please note that drawings are not to scale
Cross Sectional ViewsTrend thermAL® Casement Window |
1010Confidentiality Notice: This document and the information it contains are copyright and confidential to
Trend® Windows & Doors Pty Limited. Disclosure, use and copying in any form whatsoever, except as authorised by Trend thermAL® Windows & Doors in writing, are strictly prohibited. Patents and Design Registrations pending.
Trend thermAL® Casement Window | TAC | Mk-1 | 30 Nov 2012
Casement with Fixed Low Lite - Double Glazed
JAMB OUTSIDE
JAMBFF
JAMB
JAMB
OUTSIDE
5526
53
74
12.547
313112.5
18
31
Please note that drawings are not to scale
Cross Sectional ViewsTrend thermAL® Casement Window |
1111Confidentiality Notice: This document and the information it contains are copyright and confidential to
Trend® Windows & Doors Pty Limited. Disclosure, use and copying in any form whatsoever, except as authorised by Trend thermAL® Windows & Doors in writing, are strictly prohibited. Patents and Design Registrations pending.
Trend thermAL® Casement Window | TAC | Mk-1 | 30 Nov 2012
Casement/Fixed - Double Glazed
HEAD
OUTSIDEOUTSIDE
HEAD
SILL SILL
F F
5526
53 64
12.5
57
31
5526
31
20
31
Please note that drawings are not to scale
Cross Sectional ViewsTrend thermAL® Casement Window |
1212Confidentiality Notice: This document and the information it contains are copyright and confidential to
Trend® Windows & Doors Pty Limited. Disclosure, use and copying in any form whatsoever, except as authorised by Trend thermAL® Windows & Doors in writing, are strictly prohibited. Patents and Design Registrations pending.
Trend thermAL® Casement Window | TAC | Mk-1 | 30 Nov 2012
OUTSIDE
JAMB
MULLION
F
JAMB
5526
53
74
3418
9
923131
Casement/Fixed - Double Glazed
Please note that drawings are not to scale
Cross Sectional ViewsTrend thermAL® Casement Window |
1313Confidentiality Notice: This document and the information it contains are copyright and confidential to
Trend® Windows & Doors Pty Limited. Disclosure, use and copying in any form whatsoever, except as authorised by Trend thermAL® Windows & Doors in writing, are strictly prohibited. Patents and Design Registrations pending.
Trend thermAL® Casement Window | TAC | Mk-1 | 30 Nov 2012
Casement/Fixed with Low Lite - Double Glazed
OUTSIDE
HEAD
TRANSOM
SILL
F
FF F F
F
HEAD
OUTSIDE
SILL
TRANSOM
5526
64
5392
53
3431 31
713431 31
31
Please note that drawings are not to scale
Cross Sectional ViewsTrend thermAL® Casement Window |
1414Confidentiality Notice: This document and the information it contains are copyright and confidential to
Trend® Windows & Doors Pty Limited. Disclosure, use and copying in any form whatsoever, except as authorised by Trend thermAL® Windows & Doors in writing, are strictly prohibited. Patents and Design Registrations pending.
Trend thermAL® Casement Window | TAC | Mk-1 | 30 Nov 2012
Casement/Fixed with Low Lite - Double Glazed
OUTSIDE
MULLION
F
FF
JAMB
OUTSIDE
JAMB
MULLION
F
JAMB
5526
53
74
3418
9
923131
JAMB
26
55
3171
12.5
31
FF
Please note that drawings are not to scale
Cross Sectional ViewsTrend thermAL® Casement Window |
1515Confidentiality Notice: This document and the information it contains are copyright and confidential to
Trend® Windows & Doors Pty Limited. Disclosure, use and copying in any form whatsoever, except as authorised by Trend thermAL® Windows & Doors in writing, are strictly prohibited. Patents and Design Registrations pending.
Trend thermAL® Casement Window | TAC | Mk-1 | 30 Nov 2012
Casement/Fixed/Casement - Double Glazed
FF F
HEAD
OUTSIDEOUTSIDE
HEAD
SILL SILL
54.926
53
64
12.5
57
31
5526
31
20
31
HEAD
OUTSIDE
SILL
54.926
53
64
12.5
57
Please note that drawings are not to scale
Cross Sectional ViewsTrend thermAL® Casement Window |
1616Confidentiality Notice: This document and the information it contains are copyright and confidential to
Trend® Windows & Doors Pty Limited. Disclosure, use and copying in any form whatsoever, except as authorised by Trend thermAL® Windows & Doors in writing, are strictly prohibited. Patents and Design Registrations pending.
Trend thermAL® Casement Window | TAC | Mk-1 | 30 Nov 2012
Casement/Fixed/Casement - Double Glazed
JAMB
F
MULLION
JAMB
MULLION
OUTSIDE
OUTSIDE
5526
5364
34 9
92
52
319
5352.8
12.5
Please note that drawings are not to scale
Cross Sectional ViewsTrend thermAL® Casement Window |
1717Confidentiality Notice: This document and the information it contains are copyright and confidential to
Trend® Windows & Doors Pty Limited. Disclosure, use and copying in any form whatsoever, except as authorised by Trend thermAL® Windows & Doors in writing, are strictly prohibited. Patents and Design Registrations pending.
Trend thermAL® Casement Window | TAC | Mk-1 | 30 Nov 2012
Casement/Fixed/Casement with Fixed Low Lites - Double Glazed
FF F
FF
FF
F
F F
HEAD
OUTSIDE
SILL
TRANSOM
5526
64
5392
53
3431 31
OUTSIDE
HEAD
TRANSOM
SILL
713431 31
31
HEAD
OUTSIDE
SILL
TRANSOM
5526
64
5392
53
3431 31
FF
Please note that drawings are not to scale
Cross Sectional ViewsTrend thermAL® Casement Window |
1818Confidentiality Notice: This document and the information it contains are copyright and confidential to
Trend® Windows & Doors Pty Limited. Disclosure, use and copying in any form whatsoever, except as authorised by Trend thermAL® Windows & Doors in writing, are strictly prohibited. Patents and Design Registrations pending.
Trend thermAL® Casement Window | TAC | Mk-1 | 30 Nov 2012
Casement/Fixed/Casement with Low Lites - Double Glazed
OUTSIDE
F
F
F FF F F
OUTSIDE
JAMB
F
MULLION
JAMB
MULLION
OUTSIDE
OUTSIDE
5526
5364
34 9
92
52
319
5352.8
12.5
JAMB
MULLION
JAMB
MULLION
3130
713434
31
71
31 31
2655