6

7

Go into “My Settings” and a new page with multiple tabs will appear.

Under the “General” tab, enter the 8 character code from the back of your clicker in the “Instructor’s Remote ID” box.

5

Click “New” and you will be prompted to enter the information for your course. Once the iClicker list has been populated with your course, you can select your course and click “Choose.”

Under the LMS/Reg tab, click “Blackboard” in the Learning management System box. Select theappropriate version of Blackboardfrom the drop down menu to the right.Click “Set for Course” at the bottom of the window.

NOTE: This area is optional and is used as an identi�er for the course instructor – any name can be used for the course title and no speci�c course information is needed.

4

2

iClicker Quick Set-Up Guide for Instructors

9

Go back to the folder and click the iGrader Application. You will be asked if you want to run the program. Click “Run” and iGrader will open a pop-up box.

8

11

Your Security Key can be found in your Blackboard Learn course. The Security Key can be found in Course Management -> Course Tools -> iclicker Instructor Tools.Click “SSO Security Key” to generate a one-time use key.

Go back to the iGrader window andenter the Security Key information. Use your UIC NetID as your LMS Username. Click “Log In.”

10

Select the “Sync” option at the bottom of the box. When prompted, click “Run.”

igrader

3

iClicker Quick Set-Up Guide for Instructors

Output formatted for: Blackboard

12

13

Select your course from the drop-down menu and click “Import Roster” at the bottom of the window. When prompted,restart iGrader. Another pop-up box will appear – click “Run.” The iGrader columns will now be populated with your student’s information.

Another pop-up box will appear – click “Run.” The iGrader columns will now be populated with your student’s information.

If you are promped to restart iGrader, youcan relaunch it from the unzipped folder.

You are now ready to use iClicker with yourstudents.

For additional help with iClicker:

Email: itl@uic.eduCall: (312) 996-9824Visit http://go.uic.edu/iClicker

4

iClicker Quick Set-Up Guide for Instructors

iClicker Quick Set-Up Guide for Instructors

1

2

3

iClicker is a classroom response system that allows instructors to pose questions to theirstudents and instantly receive feedback, answers, and poll results.

You will need an 8 character code from your iClicker base (receiver). Contact the UIC Bookstore for information on acquiring a device for your classroom and for instructions on making iClicker devices available to your students.

Students can register their iClickers through your Blackboard course site by going to Tools -> iClicker Student Registration and entering the serial number on the back of their device.

Download the iClicker software from go.uic.edu/iClicker. Depending on what type of system you are running, click the appropriate download for either Windows of Mac OSX.

Click on the download and save the �le. Select the “UIC_iclicker_win6” or“UIC_iclicker_mac6” �le and unzip it.

Navigate to the folder and click theiClicker Application �le.

You will be asked if you want to run the program. Click “Run” and iClicker will open a pop-up box.

1