idec australia pty ltd, unit 17, 104 ferntree gully rd, oakleigh, vic 3166 high performance, compact...

IDEC AUSTRALIA PTY LTD, UNIT 17, 104 FERNTREE GULLY RD, OAKLEIGH, VIC 3166

High Performance, Compact and Economical


PRODUCT LINE-UP


12 I/O CPU

POWER24V DC or 100-240V AC

WITHOUT LCD : SmartAXIS Lite

WITH LCD : SmartAXIS ProDisplay critical information

Embedded mini-BUSB programming port

Optional memory cartridgeConvenient method to updateprogram without a PC

8-pt Digital InputsI6 and I7 can be configuredas 0-10V DC AINs (0-1000 Res, DC powered units only)

2-100KHz High-speed Inputs (Pro version ONLY)

Built-in Real-Time Clock12KB Memory

Built-in Keypad(LCD models only)Access and control anyPLC parameters

Four 10A Relay contactsHigh switching capacity


24 I/O CPU






16-pt Digital InputsI14 to I17 can be configuredas 0-10V DC AINs (0-1000 Res, DC powered units only)



Built-in Keypad(LCD models only)Access and control any PLC parameters

Eight Relay contacts(4pt 10A, 4pt 2A)

One Built-in RJ45Ethernet port

One RS232/485 (Optional)Supports Modbus RTU


40 I/O CPU










Relay type:(4pt 10A, 12pt 2A)Mixed type:(4pt 10A, 8pt 2A Relay outputs, and 4pt Transistor)2-PULSE OUTPUTS


Two RS232/485 (Optional)Supports Modbus RTU

Built-in SD card slotFor Data logging


48 I/O CPU










Transistor Outputs ONLY( 18pt Transistor Sink or Source )2-PULSE OUTPUTS


Two RS232/485 (Optional)Supports Modbus RTU

Built-in SD card slotFor Data logging


SmartAXIS Touch

POWER24V DC

3.8” Touchscreen with12 I/O PLC

65K colour TFT orMonochrome

5MB MemoryPortrait orLandscape mounting

Four 10ARelay contacts Built-in RJ45

Ethernet port

Built-in mini-B USB prog port

Built-in USB-A port

8-pt Digital InputsI6 & I7 can be configuredas 0-10V DC AINs (0-1000)

4-10KHz High-speed Inputs

Built-in RS232/485Modbus-RTU

Backlight dimming &colour control:- Backlight can be dimmed to save energy and to extend the life of backlight- Backlight colour can be changed to show system status. Available colours: Pink, Red or White


KEY FEATURES

Smart LCD/Keypad- Max. 24 digits x 8 Lines- ON/OFF backlight control- 50 Customizable Alarm and Dynamic Messages- Support text Scrolling and Flashing- Display Operation Menu- Display and Edit PLC Parameter- Display I/O Status- Display and Edit Network Settings (IP Address)- Display Vertical/Horizontal Bar Graph- Ladder Program Monitors and Controls

Ethernet Port- Upload, Download, Monitor PLC program

- Support Static or DHCP IP address- Modbus TCP/IP Client and Max. 3 Servers

SD Card- Supports data logging- Saved data can be retrieved via Ethernet


KEY FEATURES

USB Programming port- All SmartAXIS Controllers have USB prog. ports ( mini-B type)- No special cables are required

Ladder monitor and controls- Program in LCD and Touch models can be controlled and monitored on the unit

Built-in Real Time Clock- Support Daylight saving time for USA, Canada, Europe, Australia or User configurable

10 Amp Relay contacts - All FT1A Controllers are equipped with 10A Relay contacts

Built-in 0-10V Analogue Inputs - All SmartAXIS controllers have a minimum of 2-Analogue inputs

100 KHz High Speed Counters-Each FT1A is equipped with 4 or 6 HSC - Read from rotary encoders

100 KHz High Speed Outputs- 40 I/O and 48 I/O CPU is equipped with 2pt 100KHz outputs- Support PULS, RAMP, PWM, ZRN (stepper-motor control)


PRODUCT POSITIONING

FT1A Pro and Lite:FT1A SmartAXIS is feature rich yet Economical. Perfect for small application where the IO requirement is less than 48-IO in total.

SmartRelay

FC4A/5AAll-in-One

FC4A/5ASlim type

FT1A SmartAXIS


FT1A Touch: IDEC’s first HMI+PLC. Perfect niche market for small machine builders where performance and value are utmost important.

PRODUCT POSITIONING


COMMUNICATIONS

This function enables you to control and communicate with external devices such as PCs, Serial Printers and Barcode readers.

In order to enable this function,CPU must have an Ethernet portor CPU should be able to supportthe expansion serial communicationPort (RS232/485).

12-IO CPUs do not support this function


COMMUNICATIONS

SmartAXIS is compliant with Modbus protocol and can be used as either Modbus master or slave.Maximum of 31-slaves can be connected ONE MASTER.

Note: 12-IO CPUs do not support this function


COMMUNICATIONS

Modbus TCP protocol can also be used with CPUs with Ethernet ports. They can used as Client (master)or as Server (Slave) to monitor and exchange data.

Note: SmartAXIS Pro/Lite versions can support only 3- servers (slaves) per 1- Master SmartAXIS Touch can support up to 16- severs (slaves) per 1-Master 12-IO CPUs do not support this function.


SOFTWARE: Automation Organizer

New version of Automation Organizer software (Version 2.00) supports FT1A SmartAXIS.

Therefore, existing users AO users needs to upgrade to version 2.00. This upgrade is available to download through IDEC website.

Automation Organizer software Version 2.00 includes:

-WindLDR version 7.0 which supports FC4A, FC5A and SmartAXIS (Pro-Lite)

-WindOI-NV2 to support HG1F, HG2G/HG2F, HG3G/HG3F, HG4G/HG4F

- WindLDR and WindOI-NV3 which supports SmartAXIS Touch


12-IO PART NUMBERS & PRICING


TOUCH PART NUMBERS & PRICING


THANK YOU

idec australia pty ltd, unit 17, 104 ferntree gully rd, oakleigh, vic 3166 high performance, compact...

Documents

io requirement

numbers pricing24io

numbers pricing48io

numbers pricing40io

automation organizer12io

numbers pricingtouch

numbers pricingthank

master smartaxis touch