implant systems systematically per- fect · implant systems in collaboration with the institute of...
TRANSCRIPT
Partners in Progress
Implant systems systematIcally per-fect
Bego Implant systems product catalogue
2014
Implants
Implant prosthetics incl. CAD/CAM
Guided surgery
Hard and soft tissue management with BEGO biomaterial system
Crowns & bridgesmade by CAD/CAM
2
BEGO – your complete service provider
Section Page
BEGO – solutions from a single source 4
BEGO Academia Implantology 5
Regeneration · BEGO biomaterial system 7
Surgery 13
Prosthetics 61
Demo models / materials 109
Service 113
Index 132
Table of conTenTs
You can find an alphabetical index at the back of the catalogue.
3
Solutions from a single source
4
beGo
BEGO DentalA coordinated and proven range of materials, equipment and services for the manufacture of dental prosthetics in dental laboratories.www.bego.com
BEGO Medical A CAD/CAM range with a high degree of future-proofing in terms of the current and future digital value added chains.www.bego.com
BEGO Implant Systems The right solution for every indication. Systematic and clearly structured range of implants and prosthetics for over 20 years.www.bego-implantology.com
BEGO Training Center Leaders in knowledge – over 120 years of training covering all aspects of teeth.www.bego.com/en/events/bego-trainings-center
5
Training on a new level – BEGO Academia Implantology / IZI
In April 2008, the new international institute and training centre “BEGO Academia Implantology / IZI”, established by BEGO Implant Systems in collaboration with the Institute of Dental Implantology (IZI), opened its doors to dentists and dental technicians interested in further training courses. The “BEGO Academia Implantology” institute is in the Schafsberg health centre, right next to the St. Vincenz hospital in Limburg. Meas-uring over 400 m2, the institute offers state-of-the-art facilities and is run, together with the Institute of Dental Implantology (IZI), by Dr. Dr. Roland Streckbein and his staff. The institute is in the penthouse of the health centre with a beautiful view over cathedral city of Limburg.
Planning and furnishing the seminar facilities focused par-ticularly on efficiency and convenience. Thus the multimedia auditorium is located next to the surgery room, enabling optimal communication between the two areas. Microscope workbenches, 3D planning workstations and the proximity to the St. Vincenz Hospital provide the institute with the necessary clinical infra-structure. When you are planning your further training activities, take advantage of the convenience and up-to-date facilities of an ultra-modern training centre staffed by experienced oral surgeons and implant prosthodontists.
beGo academia implanToloGy
"BEGO Academia Implantology" in the Schafsberg health centre (Limburg, Germany)
6
An overview of the regeneration product range
BEGO biomaterial system 8
OsseoPlus transfer 10
7
ReGeneRaTion · beGo biomaTeRial sysTem
Biomaterials
Description Art. no. Colour code Size Quantity
• BEGO OSS Bovine bone substitute material
57212 Particle size 0.5–1 mm 0.5 ml
57213 Particle size 0.5–1 mm 1 ml
57214 Particle size 0.5–1 mm 3 ml
57215 Particle size 1–2 mm 2 ml
57216 Particle size 1–2 mm 5 ml
• BEGO OSS S Synthetic biphasic bone substitute material
57217 Particle size 0.5–1 mm 0.5 ml
57218 Particle size 0.5–1 mm 1 ml
57219 Particle size 0.8–1.5 mm 2 ml
• BEGO Collagen Fleece Absorbable, local haemostatic
57220 20 x 20 mm 12 units
• BEGO Collagen Membrane Absorbable barrier membrane made from porcine pericardium
57221 15 x 20 mm 1 unit
57222 20 x 30 mm 1 unit
57223 30 x 40 mm 1 unit
8
Note: Not all products of the biomaterial system are available throughout the world, depending on authorities' approvals. For more information, please consult your local BEGO Implant Systems sales partner.
ReGeneRaTion · beGo biomaTeRial sysTem
beGo ReGeneRaTion RanGe
Healing
Barrier function
2–4 weeks
> 3 months
BEGO Collagen Fleece
BEGO Collagen
Membrane
Resorption
Integration
3–6 months
6–9 months
BEGO OSS
BEGO bone regeneration range
BEGO soft tissue regeneration range
BEGO OSS S
9
Surgical tray and osteosynthesis screws
Description Art. no. Colour code Size Quantity
• OsseoPlus Transfer Tray comprising: • Instruments for vertical onlay grafts • Instruments for horizontal onlay grafts • Each with 3 osteosynthesis screws Ø 1.5 mm, length 10 / 12 / 14 mm • Insertion tools for osteosynthesis screws
57224 1 unit
• OsseoPlus Transfer screws Ø 1.5 57575 L6 1 unit
57576 L8 1 unit
57248 L10 1 unit
57249 L12 1 unit
57250 L14 1 unit
L
10
ReGeneRaTion · osseoplUs TRansfeR
List of manufacturers' registered trademarks, see page 111
Tools
Description Art. no. Colour code Size Quantity
• OsseoPlus Transfer ablative V Ø 7.5 57225 1 unit
• OsseoPlus Transfer center punch Ø 7.5 57226 1 unit
• OsseoPlus Transfer trepan (contra-angle) 57227 Ø 5.5 1 unit
57229 Ø 6.5 1 unit
57231 Ø 7.5 1 unit
• OsseoPlus Transfer trepan (handpiece) 57228 Ø 5.5 1 unit
57230 Ø 6.5 1 unit
57232 Ø 7.5 1 unit
• OsseoPlus Transfer drill Ø 1.2 L 57233 1 unit
• OsseoPlus Transfer drill Ø 1.6 XL 57234 1 unit
• OsseoPlus Transfer ablative H (contra-angle)
57235 Ø 5.5 1 unit
57237 Ø 6.5 1 unit
57239 Ø 7.5 1 unit
• OsseoPlus Transfer ablative H (handpiece)
57236 Ø 5.5 1 unit
57238 Ø 6.5 1 unit
57240 Ø 7.5 1 unit
• OsseoPlus Transfer bone facer Ø 3.2 57241 1 unit
• OsseoPlus Transfer disc Ø 10 L 57242 L35 1 unit
• OsseoPlus Transfer disc Ø 10 XL 57243 L45 1 unit
• OsseoPlus Transfer hand screwdriver 57245 1 unit
• OsseoPlus Transfer insertion L 57246 L28 1 unit
• OsseoPlus Transfer insertion XL 57247 L58 1 unit
11
ReGeneRaTion · osseoplUs TRansfeR
L
L
L
L
12
An overview of the surgical range
Designations and labelling 14
Implant planning accessories 17
BEGO Semados® S-Line implants / healing posts 19
BEGO Semados® RI-Line implants / healing posts 23
BEGO Semados® RS / RSX-Line implants / healing posts 27
BEGO Semados® Mini-Line implants / healing posts 33
BEGO Semados® Provisional Implant system (PI-Line) 37
Guided surgery 41
Drills 45
Bone shapers / trepans 56
Tools 57
Surgical accessories 59
13
sURGeRy
• BEGO Semados® RS / RSX-Line
3.0 mm *3)
• BEGO Semados® Mini-Line
2.7 / 2.9 / 3.1 mm
• BEGO Semados® S-Line 3.25 mm
• BEGO Semados® S / RI / RS / RSX-Line 3.75 mm
• BEGO Semados® S / RI / RS / RSX-Line 4.1 mm
• BEGO Semados® S / RI / RS / RSX-Line 4.5 mm
• BEGO Semados® S / RI / RS / RSX-Line 5.5 mm
ø 3.0 mm• *S-Line Self-tapping, cylindrical implant with 0.8 mm machined implant shoulder
• RI-Line Self-condensing, conical implant with 0.5 mm machined implant shoulder
• RS-Line Self-tapping, conical implant with 0.5 mm machined implant shoulder
• RSX-Line Self-tapping, conical implant with 0.1 mm machined implant shoulder • Mini-Line Reduced-diameter, condensing, conical implant with 0.8 mm machined implant shoulder
ø 3.5 mm
ø 3.67 mm
ø 3.67 mm
ø 4.1 mm
ø 4.5 mm
ø 5.5 mm
14
* Note: BEGO Semados® S-Line 3.25–4.5 – guided surgery implantation with the BEGO Guide System is possible*3) Dia. 3.0 available from second quarter, 2014 – Depending on authorities' approvals
desiGnaTions and labellinG
The BEGO Semados® implant range Colour code / diameter
Manufacturer Colour code
Size
Colour code Ø 3.0 mm Ø 2.7 / 2.9 / 3.1 mm Ø 3.25 mm Ø 3.75 mm Ø 4.1 mm Ø 4.5 mm Ø 5.5 mm
Article number
Batch code
Use by
CE mark
Do not reuse
Sterilized using irradiation
Non-sterile
Consult instructions for use
Do not use if packaging is damaged
Caution
Temperature limit
Do not expose to direct sunlight
Federal law (USA) restricts this product to sale to or on the order of a dentist or physician in the USA.
Speed
Bar code Contains the manufacturer, article number, lot number and expiry date
Sticker for documentation purposes
2
3
4
1
5
6
7
1
2
3
4
5
6
7
15
desiGnaTions and labellinG
The label in detail
16
17
sURGeRy · implanT planninG accessoRies
Implant planning accessories
Description Art. no. Colour code Size Quantity
• Measuring balls for radiographic template
53889 Ø 4 mm 10 units
• Radiographic templates 53888 S-Line 1 unit
55745 RI-Line 1 unit
57959 RS / RSX-Line 1 unit
57010 Mini-Line 1 unit
57672 PI-Line 1 unit
• Drill sleeves for creating customised drill templates
55512 for pilot drills / pilot marker S / RS / RSX-Line and pilot drills RI-Line (Ø 1.6 mm)
4 units
55513 for depth drill 2.5 S / RS / RSX-Line and RI-Line (first generation)
4 units
57596 for pilot marker RI 2.5 4 units
57597 for depth drill RI 3.2 4 units
10
6
Ø
sURGeRy · implanT planninG accessoRies
18
sURGeRy · s-line implanTs / HealinG posTs
19
Implants
Description Art. no. Colour code Size Quantity
• BEGO Semados® implants S 3.25 including cover screw and titanium insertion post TiPurePlus surface Material: Grade 4 titanium (sterile packaged) • BEGO Guide-compatible
57500 n S 3.25 L8.5 1 unit
57501 n S 3.25 L10 1 unit
57502 n S 3.25 L11.5 1 unit
57503 n S 3.25 L13 1 unit
57504 n S 3.25 L15 1 unit
• BEGO Semados® implants S 3.75 including cover screw and titanium insertion post TiPurePlus surface Material: Grade 4 titanium (sterile packaged) • BEGO Guide-compatible
57601 n S 3.75 L8.5 1 unit
57602 n S 3.75 L10 1 unit
57603 n S 3.75 L11.5 1 unit
57604 n S 3.75 L13 1 unit
57605 n S 3.75 L15 1 unit
• BEGO Semados® implants S 4.1 including cover screw and titanium insertion post TiPurePlus surface Material: Grade 4 titanium (sterile packaged) • BEGO Guide-compatible
57840 n S 4.1 L7 1 unit
57841 n S 4.1 L8.5 1 unit
57842 n S 4.1 L10 1 unit
57843 n S 4.1 L11.5 1 unit
57844 n S 4.1 L13 1 unit
57845 n S 4.1 L15 1 unit
• BEGO Semados® implants S 4.5 including cover screw and titanium insertion post TiPurePlus surface Material: Grade 4 titanium (sterile packaged) • BEGO Guide-compatible
57700 n S 4.5 L7 1 unit
57701 n S 4.5 L8.5 1 unit
57702 n S 4.5 L10 1 unit
57703 n S 4.5 L11.5 1 unit
57704 n S 4.5 L13 1 unit
57705 n S 4.5 L15 1 unit
• BEGO Semados® implants S 5.5 including cover screw and titanium insertion post TiPurePlus surface Material: Grade 4 titanium (sterile packaged)
57901 n S 5.5 L8.5 1 unit
57902 n S 5.5 L10 1 unit
57903 n S 5.5 L11.5 1 unit
57904 n S 5.5 L13 1 unit
*2) For information on torques see page 124
Note: BEGO Semados® S-Line 3.25-4.5 – guided surgery implantation with the BEGO Guide System is possible
20
sURGeRy · s-line implanTs / HealinG posTs
Cover screws
Description Art. no. Colour code Size Quantity
• Implant cover screws Material: Grade 4 titanium (sterile packaged) Tool: Hexagon screwdriver 1.25 mm *2)
55505 n S 3.25 1 unit
55608 n S / RI 3.75 1 unit
55615 n S / RI 4.1 1 unit
55616 n S / RI 4.5 1 unit
55908 n S / RI 5.5 1 unit
21
sURGeRy · s-line implanTs / HealinG posTs
Healing posts
Description Art. no. Colour code Size Quantity
• Healing post (prefabricated gingival former) Material: Titanium alloy (sterile packaged) Tool: Hexagon screwdriver 1.25 mm / slot screwdriver *2)
Ø 4.0 mm healing post
55590 nn S 3.25–3.75 /RI 3.75
L3 1 unit
55591 nn S 3.25–3.75 /RI 3.75
L5 1 unit
55592 nn S 3.25–3.75 /RI 3.75
L7 1 unit
Ø 4.5 mm healing post
56300 nnnn S 3.25–4.5 /RI 3.75–4.5
L3 1 unit
56301 nnnn S 3.25–4.5 /RI 3.75–4.5
L5 1 unit
56302 nnnn S 3.25–4.5 / RI 3.75–4.5
L7 1 unit
Ø 5.0 mm healing post
55593 nnnn S 3.25–4.5 / RI 3.75–4.5
L3 1 unit
55594 nnnn S 3.25–4.5 / RI 3.75–4.5
L5 1 unit
55595 nnnn S 3.25–4.5 / RI 3.75–4.5
L7 1 unit
Ø 6.0 mm healing post
56303 nnnnn S 3.25–5.5 / RI 3.75–5.5
L3 1 unit
56304 nnnnn S 3.25–5.5 /RI 3.75-5.5
L5 1 unit
56305 nnnnn S 3.25-5.5 / RI 3.75–5.5
L7 1 unit
• Healing post, conical (prefabricated gingival former for bar restorations) Material: Titanium alloy (sterile packaged) Tool: Hexagon screwdriver 1.25 mm / slot screwdriver *2)
Ø 6.0 mm healing post
57324 nn S 3.25–3.75 / RI 3.75
L5 1 unit
57339 n S / RI 4.1 L5 1 unit
• Individual healing post Ø 7 (individually finishable gingival former) comprising: • Healing post • Prosthesis screw Hex 1.25 mm Material: Polyether-ether-ketone (PEEK) Tool: Hexagon screwdriver 1.25 mm *2)
55953 nnnnn S 3.25–5.5 / RI 3.75–5.5 1 unit
Ø
L
Ø
L
Ø
L8
.4
Ø
L
1.5
2
22
sURGeRy · s-line implanTs / HealinG posTs
*2) For information on torques see page 124
sURGeRy · Ri-line implanTs / HealinG posTs
23
Implants
Description Art. no. Colour code Size Quantity
• BEGO Semados® implants RI 3.75 including cover screw and titanium insertion post TiPurePlus surface Material: Grade 4 titanium (sterile packaged)
57708 n RI 3.75 L8.5 1 unit
57709 n RI 3.75 L10 1 unit
57710 n RI 3.75 L11.5 1 unit
57711 n RI 3.75 L13 1 unit
57712 n RI 3.75 L15 1 unit
• BEGO Semados® implants RI 4.1 including cover screw and titanium insertion post TiPurePlus surface Material: Grade 4 titanium (sterile packaged)
57718 n RI 4.1 L8.5 1 unit
57719 n RI 4.1 L10 1 unit
57720 n RI 4.1 L11.5 1 unit
57721 n RI 4.1 L13 1 unit
57722 n RI 4.1 L15 1 unit
• BEGO Semados® implants RI 4.5 including cover screw and titanium insertion post TiPurePlus surface Material: Grade 4 titanium (sterile packaged)
57728 n RI 4.5 L8.5 1 unit
57729 n RI 4.5 L10 1 unit
57730 n RI 4.5 L11.5 1 unit
57731 n RI 4.5 L13 1 unit
57732 n RI 4.5 L15 1 unit
• BEGO Semados® implants RI 5.5 including cover screw and titanium insertion post TiPurePlus surface Material: Grade 4 titanium (sterile packaged)
57738 n RI 5.5 L8.5 1 unit
57739 n RI 5.5 L10 1 unit
57740 n RI 5.5 L11.5 1 unit
57741 n RI 5.5 L13 1 unit
*2) For information on torques see page 124
24
sURGeRy · Ri-line implanTs / HealinG posTs
25
sURGeRy · Ri-line implanTs / HealinG posTs
Cover screws
Description Art. no. Colour code Size Quantity
• Implant cover screws Material: Grade 4 titanium (sterile packaged) Tool: Hexagon screwdriver 1.25 mm *2)
55608 n S / RI 3.75 1 unit
55615 n S / RI 4.1 1 unit
55616 n S / RI 4.5 1 unit
55908 n S / RI 5.5 1 unit
Healing posts
Description Art. no. Colour code Size Quantity
• Healing post (prefabricated gingival former) Material: Titanium alloy (sterile packaged) Tool: Hexagon screwdriver 1.25 mm / slot screwdriver *2)
Ø 4.0 mm healing post
55590 nn S 3.25–3.75 / RI 3.75 L3 1 unit
55591 nn S 3.25–3.75 / RI 3.75 L5 1 unit
55592 nn S 3.25–3.75 / RI 3.75 L7 1 unit
Ø 4.5 mm healing post
56300 nnnn S 3.25–4.5 / RI 3.75–4.5
L3 1 unit
56301 nnnn S 3.25–4.5 / RI 3.75–4.5
L5 1 unit
56302 nnnn S 3.25–4.5 / RI 3.75–4.5
L7 1 unit
Ø 5.0 mm healing post
55593 nnnn S 3.25–4.5 /RI 3.75–4.5
L3 1 unit
55594 nnnn S 3.25–4.5 / RI 3.75–4.5
L5 1 unit
55595 nnnn S 3.25–4.5 / RI 3.75–4.5
L7 1 unit
Ø 6.0 mm healing post
56303 nnnnn S 3.25–5.5 / RI 3.75–5.5
L3 1 unit
56304 nnnnn S 3.25–5.5 / RI 3.75–5.5
L5 1 unit
56305 nnnnn S 3.25–5.5 / RI 3.75–5.5
L7 1 unit
Ø
L
Ø
L
Ø
L
Healing posts
Description Art. no. Colour code Size Quantity
• Healing post, conical (prefabricated gingival former for bar restorations) Material: Titanium alloy (sterile packaged) Tool: Hexagon screwdriver 1.25 mm / slot screwdriver *2)
Ø 6.0 mm healing post
57324 nn S 3.25–3.75 / RI 3.75
L5 1 unit
57339 n S / RI 4.1 L5 1 unit
• Individual healing post Ø 7 (individually finishable gingival former) comprising: • Healing post • Prosthesis screw Hex 1.25 mm Material: Polyether-ether-ketone (PEEK) Tool: Hexagon screwdriver 1.25 mm *2)
55953 nnnnn S 3.25–5.5 / RI 3.75–5.5 1 unit
8.4
Ø
L
1.5
2
26
sURGeRy · Ri-line implanTs / HealinG posTs
27
sURGeRy · Rs / RsX-line implanTs / HealinG posTs
28
Implants
Description Art. no. Colour code Size Quantity
• BEGO Semados® implants RS 3.0 including cover screw and titanium insertion post TiPurePlus surface Material: Grade 4 titanium (sterile packaged)
57962 n RS 3.0 L10 1 unit
57963 n RS 3.0 L11.5 1 unit
57964 n RS 3.0 L13 1 unit
57965 n RS 3.0 L15 1 unit
• BEGO Semados® implants RS 3.75 including cover screw and titanium insertion post TiPurePlus surface Material: Grade 4 titanium (sterile packaged)
57966 n RS 3.75 L8.5 1 unit
57967 n RS 3.75 L10 1 unit
57968 n RS 3.75 L11.5 1 unit
57969 n RS 3.75 L13 1 unit
57970 n RS 3.75 L15 1 unit
• BEGO Semados® implants RS 4.1 including cover screw and titanium insertion post TiPurePlus surface Material: Grade 4 titanium (sterile packaged)
57971 n RS 4.1 L7 1 unit
57972 n RS 4.1 L8.5 1 unit
57973 n RS 4.1 L10 1 unit
57974 n RS 4.1 L11.5 1 unit
57975 n RS 4.1 L13 1 unit
57976 n RS 4.1 L15 1 unit
• BEGO Semados® implants RS 4.5 including cover screw and titanium insertion post TiPurePlus surface Material: Grade 4 titanium (sterile packaged)
57977 n RS 4.5 L7 1 unit
57978 n RS 4.5 L8.5 1 unit
57979 n RS 4.5 L10 1 unit
57980 n RS 4.5 L11.5 1 unit
57981 n RS 4.5 L13 1 unit
57982 n RS 4.5 L15 1 unit
• BEGO Semados® implants RS 5.5 including cover screw and titanium insertion post TiPurePlus surface Material: Grade 4 titanium (sterile packaged)
57983 n RS 5.5 L7 1 unit
57984 n RS 5.5 L8.5 1 unit
57985 n RS 5.5 L10 1 unit
57986 n RS 5.5 L11.5 1 unit
57987 n RS 5.5 L13 1 unit
*2) For information on torques see page 124*3) Dia. 3.0 available from second quarter, 2014 – Depending on authorities' approvals
sURGeRy · Rs / RsX-line implanTs / HealinG posTs
NewØ 3.0
*3
29
sURGeRy · Rs / RsX-line implanTs / HealinG posTs
Implants
Description Art. no. Colour code Size Quantity
• BEGO Semados® implants RSX 3.0 including cover screw and titanium insertion post TiPurePlus surface Material: Grade 4 titanium (sterile packaged)
57862 n RSX 3.0 L10 1 unit
57863 n RSX 3.0 L11.5 1 unit
57864 n RSX 3.0 L13 1 unit
57865 n RSX 3.0 L15 1 unit
• BEGO Semados® implants RSX 3.75 including cover screw and titanium insertion post TiPurePlus surface Material: Grade 4 titanium (sterile packaged)
57866 n RSX 3.75 L8.5 1 unit
57867 n RSX 3.75 L10 1 unit
57868 n RSX 3.75 L11.5 1 unit
57869 n RSX 3.75 L13 1 unit
57870 n RSX 3.75 L15 1 unit
• BEGO Semados® implants RSX 4.1 including cover screw and titanium insertion post TiPurePlus surface Material: Grade 4 titanium (sterile packaged)
57871 n RSX 4.1 L7 1 unit
57872 n RSX 4.1 L8.5 1 unit
57873 n RSX 4.1 L10 1 unit
57874 n RSX 4.1 L11.5 1 unit
57875 n RSX 4.1 L13 1 unit
57876 n RSX 4.1 L15 1 unit
• BEGO Semados® implants RSX 4.5 including cover screw and titanium insertion post TiPurePlus surface Material: Grade 4 titanium (sterile packaged)
57877 n RSX 4.5 L7 1 unit
57878 n RSX 4.5 L8.5 1 unit
57879 n RSX 4.5 L10 1 unit
57880 n RSX 4.5 L11.5 1 unit
57881 n RSX 4.5 L13 1 unit
57882 n RSX 4.5 L15 1 unit
• BEGO Semados® implants RSX 5.5 including cover screw and titanium insertion post TiPurePlus surface Material: Grade 4 titanium (sterile packaged)
57883 n RSX 5.5 L7 1 unit
57884 n RSX 5.5 L8.5 1 unit
57885 n RSX 5.5 L10 1 unit
57886 n RSX 5.5 L11.5 1 unit
57887 n RSX 5.5 L13 1 unit
NewØ 3.0
*3
Cover screws
Description Art. no. Colour code Size Quantity
• Implant cover screws Material: Grade 4 titanium (sterile packaged) Tool: Hexagon screwdriver 1.25 mm *2)
57950 n RS / RSX 3.0 1 unit
57951 n RS / RSX 3.75 1 unit
57952 n RS / RSX 4.1 1 unit
57953 n RS / RSX 4.5 1 unit
57954 n RS / RSX 5.5 1 unit
Healing posts
Description Art. no. Colour code Size Quantity
• Healing post RS / RSX implants 3.0 (prefabricated gingival former) Material: Titanium alloy (sterile packaged) Tool: Hexagon screwdriver 1.25 mm / slot screwdriver *2)
Ø 3.5 mm healing post
57764 n RS / RSX 3.0 L3 1 unit
57765 n RS / RSX 3.0 L5 1 unit
57766 n RS / RSX 3.0 L7 1 unit
Ø 4.0 mm healing post
57767 n RS / RSX 3.0 L3 1 unit
57768 n RS / RSX 3.0 L5 1 unit
57769 n RS / RSX 3.0 L7 1 unit
Ø 4.5 mm healing post
57770 n RS / RSX 3.0 L3 1 unit
57771 n RS / RSX 3.0 L5 1 unit
57772 n RS / RSX 3.0 L7 1 unit
sURGeRy · Rs / RsX-line implanTs / HealinG posTs
LL
Ø
Ø
L
Ø
30
*2) For information on torques see page 124*3) Dia. 3.0 available from second quarter, 2014 – Depending on authorities' approvals
NewØ 3.0
*3
NewØ 3.0
*3
Healing posts
Description Art. no. Colour code Size Quantity
• Healing post (prefabricated gingival former) Material: Titanium alloy (sterile packaged) Tool: Hexagon screwdriver 1.25 mm / slot screwdriver *2)
Ø 4.0 mm healing post
55590 nn S 3.25–3.75 /RI 3.75
L3 1 unit
55591 nn S 3.25–3.75 /RI 3.75
L5 1 unit
55592 nn S 3.25–3.75 /RI 3.75
L7 1 unit
Ø 4.5 mm healing post
56300 nnnn S 3.25–4.5 /RI 3.75–4.5
L3 1 unit
56301 nnnn S 3.25–4.5 /RI 3.75–4.5
L5 1 unit
56302 nnnn S 3.25–4.5 / RI 3.75–4.5
L7 1 unit
Ø 5.0 mm healing post
55593 nnnn S 3.25–4.5 /RI 3.75–4.5
L3 1 unit
55594 nnnn S 3.25–4.5 / RI 3.75–4.5
L5 1 unit
55595 nnnn S 3.25–4.5 / RI 3.75–4.5
L7 1 unit
Ø 6.0 mm healing post
56303 nnnnn S 3.25–5.5 / RI 3.75–5.5
L3 1 unit
56304 nnnnn S 3.25–5.5 /RI 3.75–5.5
L5 1 unit
56305 nnnnn S 3.25–5.5 /RI 3.75–5.5
L7 1 unit
• Healing post, conical (prefabricated gingival former for bar restorations) Material: Titanium alloy (sterile packaged) Tool: Hexagon screwdriver 1.25 mm / slot screwdriver *2)
Ø 6.0 mm healing post
57324 nn S 3.25–3.75 / RI 3.75 L5 1 unit
57339 n S / RI 4.1 L5 1 unit
• Individual healing post Ø 7 (individually finishable gingival former) comprising: • Healing post • Prosthesis screw Hex 1.25 mm Material: Polyether-ether-ketone (PEEK) Tool: Hexagon screwdriver 1.25 mm *2)
55953 nnnnn S 3.25-5.5 / RI 3.75-5.5 1 unit
Ø
L
Ø
L
Ø
L8
.4
Ø
L
1.5
2
sURGeRy · Rs / RsX-line implanTs / HealinG posTs
31
32
sURGeRy · mini-line implanTs / HealinG posTs
33
34
sURGeRy · mini-line implanTs / HealinG posTs
Implants
Description Art. no. Colour code Size Quantity
• BEGO Semados® implants Mini 2.7 including cover screw and titanium insertion post TiPurePlus surface Material: Grade 4 titanium (sterile packaged)
56947 nn Mini 2.7 L11.5 1 unit
56948 nn Mini 2.7 L13 1 unit
56949 nn Mini 2.7 L15 1 unit
• BEGO Semados® implants Mini 2.9 including cover screw and titanium insertion post TiPurePlus surface Material: Grade 4 titanium (sterile packaged)
56950 nn Mini 2.9 L11.5 1 unit
56951 nn Mini 2.9 L13 1 unit
56952 nn Mini 2.9 L15 1 unit
• BEGO Semados® implants Mini 3.1 including cover screw and titanium insertion post TiPurePlus surface Material: Grade 4 titanium (sterile packaged)
56953 nn Mini 3.1 L11.5 1 unit
56954 nn Mini 3.1 L13 1 unit
56955 nn Mini 3.1 L15 1 unit
Ø 2
.7
Ø 3.5
Ø 2
.9
Ø 3.5
Ø 3
.1
Ø 3.5
*2) For information on torques see page 124
35
sURGeRy · mini-line implanTs / HealinG posTs
Cover screws
Description Art. no. Colour code Size Quantity
• Implant cover screw Mini Material: Grade 4 titanium (sterile packaged) Tool: Hexagon screwdriver 1.25 mm *2)
56956 n Mini 2.7–3.1 L2 1 unit
Healing posts
Description Art. no. Colour code Size Quantity
• Healing post Mini (prefabricated gingival former) Material: Titanium alloy (sterile packaged) Tool: Hexagon screwdriver 1.25 mm / slot screwdriver *2)
Ø 3.5 mm healing post
56957 n Mini 2.7–3.1 L3 1 unit
56958 n Mini 2.7–3.1 L4 1 unit
57252 n Mini 2.7–3.1 L7 1 unit
L
Ø
L
36
37
sURGeRy · pRoVisional implanT sysTem
Implants
Description Art. no. Colour code Size Quantity
• BEGO Semados® provisional implant (PI) Material: Titanium alloy (sterile packaged)
57660 Ø 2.8 L14 1 unit
57673 Ø 2.8 L14 10 units
Surgical tray
Description Art. no. Colour code Size Quantity
• BEGO Semados® PI tray incl. container, fully equipped
57670 1 unit
Impression taking
Description Art. no. Colour code Size Quantity
• PI multifunctional cap Material: Titanium alloy
57661 1 unit
57674 5 units
Matrices
Description Art. no. Colour code Size Quantity
• PI multifunctional cap Material: Titanium alloy
57661 1 unit
57674 5 units
• PI protection cap Material: Polyether-ether-ketone (PEEK) (sterile packaged)
57662 5 units
Implant analogs
Description Art. no. Colour code Size Quantity
• PI implant analogs 57671 1 unit
57675 5 units
sURGeRy · pRoVisional implanT sysTem
L
38
sURGeRy · pRoVisional implanT sysTem
Tools
Description Art. no. Colour code Size Quantity
• PI depth drill 57664 Ø 1.5 1 unit
• PI paralleling post 57663 1 unit
• Insertion tool for implants with W&H contra-angle connection
57665 1 unit
• BEGO Semados® ratchet adapter with ratchet connection for universal use of the ratchet (Ratchet grips the adapter head / Adapter shaft takes standard dental shaft according to EN ISO 1797-1)
55599 L8 1 unit
• PI removal tool 57666 1 unit
• PI ratchet 57668 1 unit
• PI bending tool 57667 1 unit
• PI stabilizer 57669 1 unit
L
20
39
40
41
GUided sURGeRy
42
Note: BEGO Guide System – guided surgery preparation of BEGO Semados® S-Line 3.25- 4.5 is possible
GUided sURGeRy
Surgical tray
Description Art. no. Colour code Size Quantity
• BEGO Guide S-Line Tray incl. container, fully equipped
57399 1 unit
Sleeves
Description Art. no. Colour code Size Quantity
• BEGO Guide master sleeves
57395 Ø 4.2 (A) 10 units
57396 Ø 4.2 (A) 25 units
57397 Ø 4.7 (B) 10 units
57398 Ø 4.7 (B) 25 units
Spoons
Description Art. no. Colour code Size Quantity
• BEGO Guide spoons 57411 1.6 (A1) 1 unit
57412 2.5 (A2) 1 unit
57413 S 3.25 (A3) 1 unit
57414 S 3.75 (A4) 1 unit
57415 1.6 (B1) 1 unit
57416 2.5 (B2) 1 unit
57417 S 3.25 (B3) 1 unit
57418 S 3.75 (B4) 1 unit
57419 S 4.1 (B5) 1 unit
57420 S 4.5 (B6) 1 unit
Tissue punches
Description Art. no. Colour code Size Quantity
• BEGO Guide tissue punches 57421 nn S 3.25–3.75 (A) 1 unit
57422 nn S 4.1–4.5 (B) 1 unit
BEGO Guide System
43
GUided sURGeRy
Drills
Description Art. no. Colour code Size Quantity
• BEGO Guide center drill 57459 Ø 4.2 (A) 1 unit
57463 Ø 4.7 (B) 1 unit
• BEGO Guide pilot drill 57423 L18 (X1) 1 unit
57424 L23.5 (Y1) 1 unit
57425 L29 (Z1) 1 unit
• BEGO Guide depth drill 2.5 57426 L18 (X2) 1 unit
57427 L23.5 (Y2) 1 unit
57428 L29 (Z2) 1 unit
• BEGO Guide depth drill S 3.25 57429 n L18 (X3) 1 unit
57430 n L23.5 (Y3) 1 unit
57431 n L29 (Z3) 1 unit
• BEGO Guide depth drill S 3.75 57432 n L18 (X4) 1 unit
57433 n L23.5 (Y4) 1 unit
57434 n L29 (Z4) 1 unit
• BEGO Guide depth drill S 4.1 57435 n L18 (X5) 1 unit
57436 n L23.5 (Y5) 1 unit
57437 n L29 (Z5) 1 unit
• BEGO Guide depth drill S 4.5 57438 n L18 (X6) 1 unit
57439 n L23.5 (Y6) 1 unit
57441 n L29 (Z6) 1 unit
• BEGO Guide countersink 57442 n S 3.25 (3) 1 unit
57443 n S 3.75 (4) 1 unit
57444 n S 4.1 (5) 1 unit
57445 n S 4.5 (6) 1 unit
BEGO Guide System
44
GUided sURGeRy
Drills
Description Art. no. Colour code Size Quantity
• BEGO Guide screw tappers 57446 n S 3.25 (3) 1 unit
57447 n S 3.75 (4) 1 unit
57448 n S 4.1 (5) 1 unit
57449 n S 4.5 (6) 1 unit
Tools
Description Art. no. Colour code Size Quantity
• BEGO Guide connector 57450 Ø 4.2 (AX) 1 unit
57451 Ø 4.2 (AY) 1 unit
57452 Ø 4.2 (AZ) 1 unit
57453 Ø 4.7 (BX) 1 unit
57454 Ø 4.7 (BY) 1 unit
57455 Ø 4.7 (BZ) 1 unit
• BEGO Guide depth stop ring connector 57456 Ø 4.2 (A) 1 unit
57457 Ø 4.7 (B) 1 unit
• BEGO Guide ratchet adapter for connector
57458 1 unit
Note: BEGO Guide System – guided surgery preparation of BEGO Semados® S-Line 3.25–4.5 is possible
BEGO Guide System
45
sURGeRy · dRills
46
sURGeRy · dRills
Tissue punches S / RI / RS / RSX-Line
Description Art. no. Colour code Size Quantity
• Tissue punches S / RI-Line 57056 nn S 3.25–3.75 / RI 3.75 1 unit
57057 n S / RI 4.1 1 unit
57058 n S / RI 4.5 1 unit
57059 n S / RI 5.5 1 unit
Surgical tray
Description Art. no. Colour code Size Quantity
• BEGO Semados® S-Line TrayPlus incl. container, excl. drill module S 5.5 (Art. no. 57347) (instruments without internal cooling)
57340 1 unit
Drill module for S-Line (without internal cooling)
Description Art. no. Colour code Size Quantity
• Drill module S 5.5 for S-Line trayPlus comprising: • Depth drill, short (without internal cooling) • Countersink (without internal cooling) • Screw tapper with ratchet connection
57347 n S 5.5 1 unit
Drills for S-Line (without internal cooling)
Description Art. no. Colour code Size Quantity
• Pilot marker, short/long 57308 L15 1 unit
57309 L23 1 unit
• Pilot drill, short/long Alternative to pilot marker short / long
55752 L16 1 unit
55811 L24 1 unit
• Depth drill 2.5, short/long (without internal cooling)
57100 L15 1 unit
57101 L20 1 unit
BEGO Semados® S-Line
Ø 1
.6
24
Ø 1
.6
23
15
Ø 1
.6Ø
1.6
16
Ø 2
.5
15
Ø 2
.5
20
47
sURGeRy · dRills
Drills for S-Line (without internal cooling)
Description Art. no. Colour code Size Quantity
• Depth drill S-Line, short (without internal cooling)
57102 n S 3.25 1 unit
57104 n S 3.75–5.5 1 unit
57106 n S 4.1–5.5 1 unit
57108 n S 4.5–5.5 1 unit
57110 n S 5.5 1 unit
• Depth drill S-Line long (without internal cooling)
57103 n S 3.25 1 unit
57105 n S 3.75–5.5 1 unit
57107 n S 4.1–5.5 1 unit
57109 n S 4.5–5.5 1 unit
• Countersink S-Line (without internal cooling)
57350 n S 3.25 1 unit
57351 n S 3.75 1 unit
57352 n S 4.1 1 unit
57353 n S 4.5 1 unit
57354 n S 5.5 1 unit
• Screw tapper S-Line (without internal cooling)
57332 n S 3.25 1 unit
57333 n S 3.75 1 unit
57334 n S 4.1 1 unit
57335 n S 4.5 1 unit
57336 n S 5.5 1 unit
20
Ø 2
.8
20
Ø 3
.25
20
Ø 4
.0Ø
3.6
5
20
15
15
15
15
15
Ø 3
.25
Ø 3
.67
Ø 4
.1Ø
4.5
Ø 5
.5
23
20
20
20
20
Ø 2
.8
15
Ø 3
.25
15
Ø 4
.0
15
Ø 4
.7
15
Ø 3
.65
15
BEGO Semados® S-Line
48
Drill stop sets
Description Art. no. Colour code Size Quantity
• Drill stops for S-Line and RI-Line (first generation), not compatible with RI-Line TrayPlus and RI-Line drills as of Art. no. 57***
55804 nn Depth drill 2.5S 3.25–3.75 / RI 3.75
1 set
55715 n S / RI 4.1 1 set
55810 n S / RI 4.5 1 set
55910 n S / RI 5.5 1 set
• Drill stop Trayplus for S-Line and RI-Line (first generation), not compatible with RI-Line TrayPlus and RI-Line drills as of Art. no. 57*** – incl. box
57345 nnnnn incl. all drill stops 1 unit
*4)Drills for single use S-Line
Description Art. no. Colour code Size Quantity
• *4) Drills for single use Basic kit comprising: • Pilot drill, short • Depth drill, short 2.5 • Depth drill, short S 3.25 • Depth drill, short S 3.75 (sterile packaged)
55596 nn S 3.25–3.75 1 unit
• *4) Drills for single use depth drills (sterile packaged)
56992 n S 4.1 1 unit
55597 n S 4.5 1 unit
55598 n S 5.5 1 unit
sURGeRy · dRills
BEGO Semados® S-Line
*4) S-Line drills for single use are not compatible with BEGO Semados® drill stops or drill sleeves.
49
Tissue punches S / RI / RS / RSX-Line
Description Art. no. Colour code Size Quantity
• Tissue punches S / RI-Line 57056 nn S 3.25–3.75 / RI 3.75 1 unit
57057 n S / RI 4.1 1 unit
57058 n S / RI 4.5 1 unit
57059 n S / RI 5.5 1 unit
Surgical tray
Description Art. no. Colour code Size Quantity
• BEGO Semados® RI-Line TrayPlus incl. container, excl. drill module RI 5.5 (Art. no. 57613)
57612 1 unit
Drill module for RI-Line (RI-Line TrayPlus)
Description Art. no. Colour code Size Quantity
• Drill module RI 5.5 comprising: • Depth drill • Countersink • Threadformer • Screw tapper
57613 n RI 5.5 1 unit
Drills for RI-Line (RI-Line TrayPlus)
Description Art. no. Colour code Size Quantity
• Pilot marker RI-Line 2.5, short/long 57581 L16 1 unit
57582 L25 1 unit
• Depth drills RI-Line 2.5, short/long Alternative to pilot marker RI-Line 2.5, short / long
57037 L15 1 unit
57038 L20 1 unit
• Depth drills RI-Line 3.2, short/long 57583 L15 1 unit
57584 L20 1 unit
sURGeRy · dRills
BEGO Semados® RI-Line
Ø 2
.5
25
16
Ø 2
.5Ø
3.2
20
15
Ø 3
.2
20
15
Ø 2
.5Ø
2.5
50
Drills for RI-Line (RI-Line TrayPlus)
Description Art. no. Colour code Size Quantity
• Depth drill RI-Line, short 57585 n RI 3.75 1 unit
57587 n RI 4.1 1 unit
57589 n RI 4.5 1 unit
57591 n RI 5.5 1 unit
• Depth drill RI-Line, long 57586 n RI 3.75 1 unit
57588 n RI 4.1 1 unit
57590 n RI 4.5 1 unit
• Countersink RI-Line 57592 n RI 3.75 1 unit
57593 n RI 4.1 1 unit
57594 n RI 4.5 1 unit
57595 n RI 5.5 1 unit
• Threadformer RI-Line 55766 n RI 3.25 1 unit
57615 n RI 3.75 1 unit
57616 n RI 4.1 1 unit
57617 n RI 4.5 1 unit
57618 n RI 5.5 1 unit
15
Ø 3
.0
Ø 3.52
15
Ø 3
.49
Ø 3.93
15
Ø 3
.21
Ø 4.32
15
Ø 4
.3
Ø 5.28
15
Ø 3
.15
Ø 3.67
15
Ø 3
.58
Ø 4.1
15
Ø 3
.28
Ø 4.5
15
Ø 4
.28
Ø 5.5
Ø 2
.73
15
Ø 3.25
20
Ø 3
.0
Ø 3.52
20
Ø 3
.49
Ø 3.93
20
Ø 3
.21
Ø 4.32
17
17
17
17
sURGeRy · dRills
BEGO Semados® RI-Line
51
sURGeRy · dRills
Drills for RI-Line (RI-Line TrayPlus)
Description Art. no. Colour code Size Quantity
• Screw tapper RI-Line 57619 n RI 3.75 1 unit
57620 n RI 4.1 1 unit
57621 n RI 4.5 1 unit
57622 n RI 5.5 1 unit
Drill stop sets
Description Art. no. Colour code Size Quantity
• Drill stops for S-Line and RI-Line (first generation), not compatible with RI-Line TrayPlus and RI-Line drills as of Art. no. 57***
55804 nn Depth drill 2.5S 3.25–3.75 / RI 3.75
1 set
55715 n S / RI 4.1 1 set
55810 n S / RI 4.5 1 set
55910 n S / RI 5.5 1 set
• Drill stop Trayplus for S-Line and RI-Line (first generation), not compatible with RI-Line TrayPlus and RI-Line drills as of Art. no. 57*** – incl. box
57345 nnnnn incl. all drill stops 1 unit
• Drill stops RI-Line for RI-Line TrayPlus and RI-Line drills as of Art. no. 57*** (latest generation)
57607 Depth drill RI 3.2 1 set
57608 nn RI 3.75–4.1 1 set
57609 nn RI 4.5–5.5 1 set
• Drill stop TrayPlus RI-Line for RI-Line TrayPlus and RI-Line drills as of Art. no. 57*** (latest generation) – incl. box
57610 nnnn incl. all drill stops 1 unit
15
Ø 3
.15
Ø 3.67
15
Ø 3
.58
Ø 4.1
15
Ø 3
.28
Ø 4.5
15
Ø 4
.28
Ø 5.5
BEGO Semados® RI-Line
52
Tissue punches S / RI / RS / RSX-Line
Description Art. no. Colour code Size Quantity
• Tissue punches S / RI-Line 57056 nn S 3.25–3.75 / RI 3.75 1 unit
57057 n S / RI 4.1 1 unit
57058 n S / RI 4.5 1 unit
57059 n S / RI 5.5 1 unit
Surgical tray
Description Art. no. Colour code Size Quantity
• BEGO Semados® RS / RSX-Line TrayPlus incl. container, excl. drill module RS / RSX 5.5 (Art. no. 57948)
57949 1 unit
Drill module RS / RSX-Line
Description Art. no. Colour code Size Quantity
• Drill module RS / RSX 5.5 comprising: • Depth drill, short • Countersink • Screw tapper
57948 n RS / RSX 5.5 1 unit
Drills RS / RSX-Line
Description Art. no. Colour code Size Quantity
• Pilot marker RS / RSX-Line 1.6, short/long
57481 L15 1 unit
57482 L23 1 unit
• Depth drill RS / RSX-Line 2.5, short/long
57926 L15 1 unit
57927 L20 1 unit
sURGeRy · dRills
BEGO Semados® RS / RSX-Line
Ø 1
.6
23
15 Ø 1
.6Ø
2.5
20
15
Ø 2
.5
53
Drills RS / RSX-Line
Description Art. no. Colour code Size Quantity
• Depth drill RS / RSX-Line, short 57928*3 n RS / RSX 3.0 1 unit
57930 n RS / RSX 3.75 1 unit
57932 n RS / RSX 4.1 1 unit
57934 n RS / RSX 4.5 1 unit
57936 n RS / RSX 5.5 1 unit
• Depth drill RS / RSX-Line, long 57929*3 n RS / RSX 3.0 1 unit
57931 n RS / RSX 3.75 1 unit
57933 n RS / RSX 4.1 1 unit
57935 n RS / RSX 4.5 1 unit
• Countersink RS / RSX-Line 57937*3 n RS / RSX 3.0 1 unit
57938 n RS / RSX 3.75 1 unit
57939 n RS / RSX 4.1 1 unit
57940 n RS / RSX 4.5 1 unit
57941 n RS / RSX 5.5 1 unit
• Screw tapper RS / RSX-Line 57943*3 n RS / RSX 3.0 1 unit
57944 n RS / RSX 3.75 1 unit
57945 n RS / RSX 4.1 1 unit
57946 n RS / RSX 4.5 1 unit
57947 n RS / RSX 5.5 1 unit
15
Ø 1
.5
Ø 3.4
15
Ø 1
.9
Ø 3.8
15
Ø 2
.4
Ø 4.1
15
Ø 3
.4
Ø 5.0
20
20
20
20
sURGeRy · dRills
BEGO Semados® RS / RSX-Line
15
Ø 1
.4
Ø 2.8
20
Ø 1
.5
Ø 3.4
20
Ø 1
.9
Ø 3.8
20
Ø 2
.4
Ø 4.1
20
Ø 1
.4
Ø 2.8
20
13
Ø 3.67
13
Ø 4.1
13
Ø 4.5
13
Ø 5.5
13
Ø 3.0
*2) For information on torques see page 124*3) Dia. 3.0 available from second quarter, 2014 – Depending on authorities' approvals
54
sURGeRy · dRills
Drill stop sets
Description Art. no. Colour code Size Quantity
• Drill stops for RS / RSX-Line for RS / RSX-Line trayPlus
57476 Depth drill RS / RSX 2.5 1 set
57477*3 n RS / RSX 3.0 1 set
57478 n RS / RSX 3.75 1 set
57479 nn RS / RSX 4.1–4.5 1 set
57480 n RS / RSX 5.5 1 set
• Drill stop TrayPlus for RS / RSX-Line for RS / RSX-Line TrayPlus – incl. box
57483 nnnnn incl. all drill stops 1 unit
BEGO Semados® RS / RSX-Line
*3) Dia. 3.0 available from second quarter, 2014 – Depending on authorities' approvals
55
Surgical tray
Description Art. no. Colour code Size Quantity
• Mini- / OsseoPlus tray incl. container, fully equipped
56970 1 unit
Drills for Mini-Line
Description Art. no. Colour code Size Quantity
• Initial drill 55714 1 unit
• Gap cutter disc 56985 1 unit
• Gap cutter burr 56986 1 unit
• Mini-Line depth drill 56973 n Mini 2.7–3.1 L11.5 1 unit
56974 n Mini 2.7–3.1 L13 1 unit
56975 n Mini 2.7–3.1 L15 1 unit
• Mini-Line shape drill 56976 nn Mini 2.7 1 unit
56977 nn Mini 2.9 1 unit
56978 nn Mini 3.1 1 unit
• Mini-Line threadformer 57091 n Mini XS 1 unit
56979 nn Mini 2.7 1 unit
56980 nn Mini 2.9 1 unit
56981 nn Mini 3.1 1 unit
BEGO Semados® Mini-Line
sURGeRy · dRills
Ø 1
.96
11.5
Ø 1
.96
13
Ø 1
.96
15
Ø 1
.95
14.75
Ø 2.45
Ø 2
.16
14.75
Ø 2.65Ø
2.3
2
14.75
Ø 2.85
Ø 1
.75
15
Ø 2.7
Ø 2
.18
15
Ø 2.7
Ø 2
.38
15
Ø 2.9
Ø 2
.58
15
Ø 3.1
56
Bone shapers
Description Art. no. Colour code Size Quantity
• Bone profiler 57467 nn S 3.25–3.75 /RI 3.75
1 unit
57468 n S / RI 4.1 1 unit
57469 n S / RI 4.5 1 unit
57470 n S / RI 5.5 1 unit
Trepan drills
Description Art. no. Colour code Size Quantity
• Trepan drill 55817 Ø 4.2 external /Ø 3.7 internal
L20 1 unit
55815 Ø 5.0 external /Ø 4.1 internal
L20 1 unit
56991 Ø 5.0 external / Ø 4.3 internal
L20 1 unit
55816 Ø 6.0 external / Ø 5.1 internal
L20 1 unit
sURGeRy · bone sHapeRs / TRepans
Ø
L
57
Surgical tools
Description Art. no. Colour code Size Quantity
• Drill extension (with internal cooling)
53821 Extension 17 mm 1 unit
• Drill extensions, one-piece short / long (without internal cooling)
57265 Extension 15.8 mm 1 unit
55761 Extension 18.3 mm 1 unit
• Insertion tools for implants XS / short/long with ratchet connection
57260 L3 1 unit
55831 L6 1 unit
55830 L12.5 1 unit
(L3 is not suitable for removal of the implant from the glass tube.)
• Insertion tools for implants short/long with contra-angle connection
56990 L21.5 1 unit
55832 L24 1 unit
• W&H insertion tool for implants with W&H contra-angle connection
55848 L21.5 1 unit
• Guiding wrench open-end wrench and guide pin for tools with ratchet connection
53897 1 unit
• S-Line paralleling posts 55863 for pilot marker and depth drill 2.5
2 units
55864 nn for depth drill S 3.75 and S 4.1
2 units
55915 nn for depth drill S 4.5 and S 5.5
2 units
• RI-Line paralleling posts 57598 for pilot marker RI 2.5 / depth drill RI 3.2
1 unit
57599 nn for depth drill RI 3.75 and RI 4.1
1 unit
57600 nn for depth drill RI 4.5 and RI 5.5
1 unit
L
L
sURGeRy · Tools
L
58
Surgical tools
Description Art. no. Colour code Size Quantity
• Paralleling post RS / RSX-Line 57956 for pilot marker RS / RSX anddepth drill RS / RSX 2.5
2 units
57957 nn for depth drill RS / RSX 3.75 and RS / RSX 4.1
2 units
57958 nn for depth drill RS / RSX 4.5 and RS / RSX 5.5
2 units
• Mini paralleling posts 56972 1 unit
• Depth gauges 53872 S-Line 1 unit
55746 RI-Line 1 unit
57955 RS / RSX-Line 1 unit
• Cleaning reamer for internal drill cooling
55794 1 unit
• Glass-fibre pin for removal of encrustations on instruments
55523 1 unit
• Spare brush for glass-fibre pin (picture shows the entire glass-fibre pin)
55524 1 unit
• Ratchet / torque spanner with tightening torques 10–50 Ncm
55799 1 unit
• BEGO Semados® ratchet adapter with ratchet connection for universal use of the ratchet (Ratchet grips the adapter head / Adapter shaft takes standard dental shaft according to EN ISO 1797-1)
55599 L8 1 unit
• Finger wheel for better power transmission, suitable for all instruments with ratchet connection
53986 Ø 20 1 unit
110
L
Ø
sURGeRy · Tools
List of manufacturers' registered trademarks, see page 111
59
Surgical clothing
Description Art. no. Colour code Size Quantity
• Surgical drape-kit comprising: • 2 surgical coats, classic • 2 tube covers • 2 surgical tapes, 10 x 50 cm • 2 surgical drapes, 45 x 75 cm • 1 dental drape, 150 x 150 cm • 1 protective cloth DS2, 75 x 90 cm (sterile packaged)
55554 L 10 sets
55583 XL 10 sets
Surgical drapes
Description Art. no. Colour code Size Quantity
• Wrapping drapes for sterile container 57262 40 x 40 cm 1 unit
55797 60 x 40 cm 1 unit
sURGeRy · sURGical accessoRies
60
An overview of the prosthetics product range
Tools 62
BEGO Semados® S / RI / RS / RSX-Line 65
• CAD/CAM prosthetic treatment 66
• Impression taking and model making 69
• Crowns and bridges 70
• MultiPlus prosthetics 78
• Hybrid prosthetics 84
• Screws 94
BEGO Semados® Mini-Line 97
• CAD/CAM prosthetic treatment 98
• Impression taking and model making 101
• Crowns 102
• Hybrid prosthetics 103
• Screws 108
61
pRosTHeTics
Prosthetic tray
Description Art. no. Colour code Size Quantity
• Prosthetic kit comprising: • Prosthetic tray insert • Ratchet / torque spanner • Hexagon screwdriver 1.25 mm short/long • Slot screwdriver, long • Box
55826 1 unit
Prosthetic tools
Description Art. no. Colour code Size Quantity
• Hexagon screwdriver 1.25 mm, XS / short/long with ratchet connection conical for implant cover screws, healing posts, impression posts, insertion posts and prosthesis screws
57266 L5 1 unit
53949 L10 1 unit
53948 L17 1 unit
• Hexagon screwdriver 1.25 mm, contra-angle handpiece short/long conical for implant cover screws, healing posts, impression posts, insertion posts and prosthesis screws
55563 L25 1 unit
55564 L31 1 unit
• Slot screwdriver, short/long with ratchet connection for technician screws, healing posts and impression posts
53953 L10 1 unit
53952 L14 1 unit
• Ratchet / torque spanner with tightening torques 10–50 Ncm
55799 1 unit
• BEGO Semados® ratchet adapter with ratchet connection for universal use of the ratchet (Ratchet grips the adapter head / Adapter shaft takes standard dental shaft according to EN ISO 1797-1)
55599 L8 1 unit
• Finger wheel for better power transmission, suitable for all instruments
53986 Ø 20 1 unit
L
L
Ø
L
L
62
pRosTHeTics · Tools
pRosTHeTics · Tools
Prosthetic tools
Description Art. no. Colour code Size Quantity
• Technician's screwdriver with blades (4 different sizes) for technician screws and as a retainer for reamers
53728 1 unit
• Grip-TecPlus comprising: • Universal instrument handle (for accepting implant analogs) • Temperature-resistant implant analog
56701 1 unit
115
63
64
65
pRosTHeTics · s / Ri / Rs / RsX-line
CAD/CAM prosthetics
BEGO CADAbut F (one-piece individual abutments)
Medical no. System Implant diameter Material
S BEGO Semados® S-Line 3.25–3.75 4.1 4.5 5.5
BEGO Grade 5 titanium /Wirobond® MI+/BeCe® CAD zirconium XH
RI BEGO Semados® RI-Line 3.754.14.55.5
BEGO Grade 5 titanium /Wirobond® MI+/BeCe® CAD zirconium XH
BEGO CADAbut D (two-piece individual abutments)
Medical no. System Implant diameter Material
S BEGO Semados® S-Line 3.25–3.754.14.55.5
Two-piece individual abutments are available in the following materials:• BeCe® CAD zirconium XH• BeCe® CAD zirconium+• Wirobond® C+• Range of CAD/Cast® alloys• BeCe® Temp
RI BEGO Semados® RI-Line 3.754.14.55.5
BEGO CADBase (bar restorations and screw-retained bridges)
Medical no. System Implant diameter Material
S BEGO Semados® S-Line 3.25–3.754.14.55.5
Bars and occlusally screw- retained bridges are available in the following materials:• Wirobond® MI+• BEGO Grade 5 titanium
RI BEGO Semados® RI-Line 3.754.14.55.5
66
pRosTHeTics · s / Ri / Rs / RsX-line
Available for BEGO Semados® RS / RSX-Line from first quarter, 2014.
If you have any questions concerning customised CAD/CAM prosthetics from BEGO Medical GmbH (procedures or conditions), please do not hesitate to contact:
BEGO Medical GmbHWilhelm-Herbst-Str. 1 · 28359 Bremen, GermanyTel. +49 421 2028-0 · Fax +49 421 2028-174E-mail [email protected] · www.bego.com
List of manufacturers' registered trademarks, see page 111
CAD/CAM prosthetics
Bar shapes
Description
• 4Dolder® bar joint 2.3 mm
• 4Dolder® bar joint 3.0 mm
• 4Dolder® bar attachment 3.0 mm
• Round bar 1.8 mm
• Horix bar 1.8 mm
• Horix element 1.8 mm
• Individual bar shapes / bar attachments
Bar attachments / 3Locator® gauges
Description
• Bar attachments 1.8 mm (Ancora / Preci-Vertix)
• 3Locator® angle measurement gauge
67
pRosTHeTics · s / Ri / Rs / RsX-line
CAD/CAM solutions
Description Art. no. Colour code Size Quantity
• Sub-Tec CAD positioner comprising: • Sub-Tec CAD positioner • Prosthesis screw Hex 1.25 mm
• At Ø 3.0: Prosthesis screw S / RSX 3.0 – for PEEK
Material: Polyether-ether-ketone (PEEK) Tool: Hexagon screwdriver 1.25 mm *2)
57779 n RS / RSX 3.0 1 unit
57060 nnnnn S 3.25–5.5 / RI 3.75–5.5 1 unit
• Sub-Tec CAD/CAM titanium adhesive abutment comprising: • Sub-Tec adhesive abutment • Sub-TecPlus prosthesis screw • Sub-TecPlus technician screw
• At Ø 3.0: prosthesis screw RS / RSX 3.0 • At Ø 3.0: Technician screw RS / RSX 3.0 Material: Titanium alloy Tool: Hexagon screwdriver 1.25 mm / slot screwdriver *2)
57780 n RS / RSX 3.0 1 unit
57285 nn S 3.25–3.75 / RI 3.75 1 unit
57287 nnn S / RI 4.1 1 unit
57289 nnnn S / RI 4.5 1 unit
57291 nnnnn S / RI 5.5 1 unit
• Sub-Tec CAD/CAM titanium adhesive abutment no Hex comprising: • Sub-Tec adhesive abutment no Hex • Sub-TecPlus prosthesis screw • Sub-TecPlus technician screw Material: Titanium alloy Tool: Hexagon screwdriver 1.25 mm / slot screwdriver *2)
57286 nn S 3.25–3.75 / RI 3.75 1 unit
57288 nnn S / RI 4.1 1 unit
57290 nnnn S / RI 4.5 1 unit
57292 nnnnn S / RI 5.5 1 unit
• Sub-Tec CAD/CAM TiBase comprising: • Sub-Tec TiBase • Sub-TecPlus prosthesis screw • Sub-TecPlus technician screw
• At Ø 3.0: Prosthesis screw RS / RSX 3.0 • At Ø 3.0: Technician screw RS / RSX 3.0
Material: Titanium alloy Tool: Hexagon screwdriver 1.25 mm /
slot screwdriver *A Cerec / InLab Scanbody for Blue-
cam (36 units) REF 64 31 303 or Scanbody for Omnicam (36 units) REF 64 31 329 (Sirona Dental Systems GmbH, Bensheim, Germany) is required for fabricating the work. *2)
57781 n RS / RSX 3.0 1 unit
57656 nn S 3.25–3.75 /RI 3.75
1 unit
57657 n S / RI 4.1 1 unit
57658 n S / RI 4.5 1 unit
57659 n S / RI 5.5 1 unit
CAD/CAM prosthetics
68
pRosTHeTics · s / Ri / Rs / RsX-line
*2) For information on torques see page 124*3) Dia. 3.0 available from second quarter, 2014 – Depending on authorities' approvals
NewØ 3.0
*3
NewØ 3.0
*3
NewØ 3.0
*3
Impression taking and model making
Impression sets
Description Art. no. Colour code Size Quantity
• Sub-Dent closed tray impression (implant-level impression with closed tray) comprising: • Impression post cap • Sub impression post • Titanium screw L11 • Implant analog Tool: Hexagon screwdriver 1.25 mm / slot screwdriver *2)
57773 n RS / RSX 3.0 1 unit
55860 n S 3.25 1 unit
55539 n S / RI 3.75 1 unit
55617 n S / RI 4.1 1 unit
55618 n S / RI 4.5 1 unit
55551 n S / RI 5.5 1 unit
• Sub-Dent open tray impression (implant-level impression with open tray) comprising: • Sub impression post • Titanium screw L16 and L21 • Implant analog Tool: Hexagon screwdriver 1.25 mm / slot screwdriver *2)
57774 n RS / RSX 3.0 1 unit
55861 n S 3.25 1 unit
55540 n S / RI 3.75 1 unit
55619 n S / RI 4.1 1 unit
55620 n S / RI 4.5 1 unit
56500 n S / RI 5.5 1 unit
Implant analogs
Description Art. no. Colour code Size Quantity
• Implant analogs S / RI / RS / RSX 57795 n RS / RSX 3.0 3 units
57796 n RS / RSX 3.0 1 unit
53795 n S 3.25 3 units
56694 n S 3.25 1 unit
53996 n S / RI 3.75 3 units
56695 n S / RI 3.75 1 unit
55747 n S / RI 4.1 3 units
56696 n S / RI 4.1 1 unit
55748 n S / RI 4.5 3 units
56698 n S / RI 4.5 1 unit
56502 n S / RI 5.5 3 units
56699 n S / RI 5.5 1 unit
• Implant analog, temperature-resistant 55798 3 units
10
Ø 6
.5
10
NewØ 3.0
*3
NewØ 3.0
*3
69
pRosTHeTics · s / Ri / Rs / RsX-line
NewØ 3.0
*3
Provisional abutments
Description Art. no. Colour code Size Quantity
• Sub-Tec provisional abutment Ø 5.5 (Solid plastic abutment for temporary restorations) comprising: • Plastic abutment • Prosthesis screw Hex 1.25 mm • Technician screw L9 Material: Polyether-ether-ketone (PEEK) Tool: Hexagon screwdriver 1.25 mm / slot screwdriver *2)
55952 nnnn S 3.25–4.5 / RI 3.75–4.5 1 unit
• Sub-Tec provisional abutment Ø 7 (Solid plastic abutment for temporary restorations) comprising: • Plastic abutment • Prosthesis screw Hex 1.25 mm • Technician screw L9 Material: Polyether-ether-ketone (PEEK) Tool: Hexagon screwdriver 1.25 mm / slot screwdriver *2)
55951 nnnnn S 3.25–5.5 / RI 3.75–5.5 1 unit
• Sub-Tec temporary Peek abutment comprising: • Sub-Tec temporary Peek abutment • Prosthesis screw Hex 1.25 mm • Technician screw L9 Material: Polyether-ether-ketone (PEEK) Tool: Hexagon screwdriver 1.25 mm/slot screwdriver
57494 nn S 3.25–3.75 / RI 3.75 1 unit
57495 nn S / RI 4.1–4.5 1 unit
• Sub-Tec temporary titanium abutment comprising: • Sub-Tec temporary titanium abutment • Sub-TecPlus prosthesis screw • Sub-TecPlus technician screw Material: Titanium alloy Tool: Hexagon screwdriver 1.25 mm / slot screwdriver *2)
57304 nn S 3.25–3.75 / RI 3.75 1 unit
57305 nnn S / RI 4.1 1 unit
57306 nnnn S / RI 4.5 1 unit
57307 nnnnn S / RI 5.5 1 unit
• Sub-Tec temporary titanium abutment no Hex comprising: • Sub-Tec temporary titanium abutment no Hex • Sub-TecPlus prosthesis screw • Sub-TecPlus technician screw Material: Titanium alloy Tool: Hexagon screwdriver 1.25 mm / slot screwdriver *2)
57300 nn S 3.25–3.75 / RI 3.75 1 unit
57301 nnn S / RI 4.1 1 unit
57302 nnnn S / RI 4.5 1 unit
57303 nnnnn S / RI 5.5 1 unit
8.5
10
10
9.2
Crowns and bridges
10
70
pRosTHeTics · s / Ri / Rs / RsX-line
Provisional abutments
Description Art. no. Colour code Size Quantity
• Sub-Tec immediate temporary abutment Material: Titanium alloy Tool: Insertion tool for implants
57778 n RS / RSX 3.0 1 unit
57402 nn S 3.25–3.75 / RI 3.75 1 unit
57403 n S / RI 4.1 1 unit
57404 n S / RI 4.5 1 unit
Ceramic abutments
Description Art. no. Colour code Size Quantity
• BeCe® Sub-Tec ceramic abutment comprising: • Ceramic abutment • Prosthesis screw for ceramic abutment • Sub-TecPlus technician screw Material: Zirconium oxide Tool: Hexagon screwdriver 1.25 mm / slot screwdriver *2)
56092 nnnnn S 3.25–5.5 / RI 3.75–5.5 1 unit
Ceramic abutments, two-piece
Description Art. no. Colour code Size Quantity
• BeCe® Sub-TecPlus ceramic abutment comprising:
• Ceramic sleeve • Sub-Tec adhesive abutment: • Sub-TecPlus prosthesis screw • Sub-TecPlus technician screw Material: Zirconium oxide / titanium alloy Tool: Hexagon screwdriver 1.25 mm / slot screwdriver *2)
57680 nn S 3.25–3.75 / RI 3.75 1 unit
57681 nnn S / RI 4.1 1 unit
57682 nnnn S / RI 4.5 1 unit
57683 nnnnn S / RI 5.5 1 unit
• Holder BeCe® Sub- TecPlus for retaining the ceramic sleeve during processing.
57685 1 unit
Ø 2.5
7.1
1.5
Crowns and bridges
*2) For information on torques see page 124*3) Dia. 3.0 available from second quarter, 2014 – Depending on authorities' approvals
Ø 6
9.5
71
pRosTHeTics · s / Ri / Rs / RsX-line
NewØ 3.0
*3
72
pRosTHeTics · s / Ri / Rs / RsX-line
Crowns and bridges
Wirobond® MI angulated abutments
Description Art. no. Colour code Size Quantity
• Sub-TecPlus Wirobond® MI angulated abutment 15° (angle over plain (type P) or edge (type E)) comprising: • Angulated abutment • Sub-TecPlus prosthesis screw • Sub-TecPlus technician screw Material: Wirobond® MI (CoCr alloy) Tool: Hexagon screwdriver 1.25 mm / slot screwdriver *1) *2)
57180 nn 15° P GH 1–2 S 3.25–3.75 / RI 3.75 1 unit
57181 nn 15° P GH 2.5-4 S 3.25–3.75 / RI 3.75 1 unit
57182 nn 15° E GH 1–2 S 3.25–3.75 / RI 3.75 1 unit
57183 nn 15° E GH 2.5–4 S 3.25–3.75 / RI 3.75 1 unit
57184 nnn 15° P GH 1–2 S / RI 4.1 1 unit
57185 nnn 15° P GH 2.5–4 S / RI 4.1 1 unit
57186 nnn 15° E GH 1–2 S / RI 4.1 1 unit
57187 nnn 15° E GH 2.5–4 S / RI 4.1 1 unit
57188 nnnn 15° P GH 1–2 S / RI 4.5 1 unit
57189 nnnn 15° P GH 2.5–4 S / RI 4.5 1 unit
57190 nnnn 15° E GH 1–2 S / RI 4.5 1 unit
57191 nnnn 15° E GH 2.5–4 S / RI 4.5 1 unit
57192 nnnnn 15° P GH 1–2 S / RI 5.5 1 unit
57193 nnnnn 15° P GH 2.5–4 S / RI 5.5 1 unit
57194 nnnnn 15° P GH 1–2 S / RI 5.5 1 unit
57195 nnnnn 15° E GH 2.5–4 S / RI 5.5 1 unit
• Sub-TecPlus Wirobond® MI angulated abutment 20° (angle over plain (type P) or edge (type E)) comprising: • Angulated abutment • Sub-TecPlus prosthesis screw • Sub-TecPlus technician screw Material: Wirobond® MI (CoCr alloy) Tool: Hexagon screwdriver 1.25 mm / slot screwdriver *1) *2)
57196 nn 20° P GH 1–2 S 3.25–3.75 / RI 3.75 1 unit
57197 nn 20° P GH 2.5–4 S 3.25–3.75 / RI 3.75 1 unit
57198 nn 20° E GH 1–2 S 3.25–3.75 / RI 3.75 1 unit
57199 nn 20° E GH 2.5–4 S 3.25–3.75 / RI 3.75 1 unit
57200 nnn 20° P GH 1–2 S / RI 4.1 1 unit
57201 nnn 20° P GH 2.5–4 S / RI 4.1 1 unit
57202 nnn 20° E GH 1–2 S / RI 4.1 1 unit
57203 nnn 20° E GH 2.5–4 S / RI 4.1 1 unit
57204 nnnn 20° P GH 1–2 S / RI 4.5 1 unit
57205 nnnn 20° P GH 2.5–4 S / RI 4.5 1 unit
57206 nnnn 20° E GH 1–2 S / RI 4.5 1 unit
57207 nnnn 20° E GH 2.5–4 S / RI 4.5 1 unit
57208 nnnnn 20° P GH 1–2 S / RI 5.5 1 unit
57209 nnnnn 20° P GH 2.5–4 S / RI 5.5 1 unit
57210 nnnnn 20° E GH 1–2 S / RI 5.5 1 unit
57211 nnnnn 20° E GH 2.5–4 S / RI 5.5 1 unit
Assortment set Sub-TecPlus
Description Art. no. Quantity
• Assortment set Sub-TecPlus 0° / 15° / 20° for choosing the correct abutment with corresponding gingival height and angle comprising: • 20 parts + forceps
57115 1 unit
Wirobond® MI abutments
Description Art. no. Colour code Size Quantity
• Sub-TecPlus Wirobond® MI abutment comprising: • Wirobond® MI abutment • Sub-TecPlus prosthesis screw • Sub-TecPlus technician screw Material: Wirobond® MI (CoCr alloy) Tool: Hexagon screwdriver 1.25 mm / slot screwdriver *1) *2)
57164 nn GH 1–2 S 3.25–3.75 /RI 3.75
1 unit
57165 nn GH 2.5–4 S 3.25–3.75 /RI 3.75
1 unit
57168 nnn GH 1–2 S / RI 4.1 1 unit
57169 nnn GH 2.5–4 S / RI 4.1 1 unit
57172 nnnn GH 1–2 S / RI 4.5 1 unit
57173 nnnn GH 2.5–4 S / RI 4.5 1 unit
57176 nnnnn GH 1–2 S / RI 5.5 1 unit
57177 nnnnn GH 2.5–4 S / RI 5.5 1 unit
Angulated abutment, type P
• Type P = Angle over Plain
Angulated abutment, type E
• Type E = Angle over Edge
Crowns and bridges
*1) Alloy recommendation see page 131*2) For information on torques see page 124
73
pRosTHeTics · s / Ri / Rs / RsX-line
74
pRosTHeTics · s / Ri / Rs / RsX-line
Crowns and bridges
Titanium angulated abutments
Description Art. no. Colour code Size Quantity
• Sub-TecPlus titanium angulated abutment 15° (angle over plain (type P) or edge (type E)) comprising: • Angulated abutment • Sub-TecPlus prosthesis screw • Sub-TecPlus technician screw
• At Ø 3.0: Prosthesis screw RS / RSX 3.0 • At Ø 3.0: Technician screw
RS / RSX 3.0
Material: Titanium alloy Tool: Hexagon screwdriver 1.25 mm / slot screwdriver *1) *2)
57797 n 15° P GH 2.5–4 RS / RSX 3.0 1 unit
57798 n 15° E GH 2.5–4 RS / RSX 3.0 1 unit
57132 nn 15° P GH 1–2 S 3.25–3.75 / RI 3.75 1 unit
57133 nn 15° P GH 2.5–4 S 3.25–3.75 / RI 3.75 1 unit
57134 nn 15° E GH 1–2 S 3.25–3.75 / RI 3.75 1 unit
57135 nn 15° E GH 2.5–4 S 3.25–3.75 / RI 3.75 1 unit
57136 nnn 15° P GH 1–2 S / RI /4.1 1 unit
57137 nnn 15° P GH 2.5–4 S / RI 4.1 1 unit
57138 nnn 15° E GH 1–2 S / RI 4.1 1 unit
57139 nnn 15° E GH 2.5–4 S / RI 4.1 1 unit
57140 nnnn 15° P GH 1–2 S / RI 4.5 1 unit
57141 nnnn 15° P GH 2.5–4 S / RI 4.5 1 unit
57142 nnnn 15° E GH 1–2 S / RI 4.5 1 unit
57143 nnnn 15° E GH 2.5–4 S / RI 4.5 1 unit
57144 nnnnn 15° P GH 1–2 S / RI 5.5 1 unit
57145 nnnnn 15° P GH 2.5–4 S / RI 5.5 1 unit
57146 nnnnn 15° E GH 1–2 S / RI 5.5 1 unit
57147 nnnnn 15° E GH 2.5–4 S / RI 5.5 1 unit
Assortment set Sub-TecPlus
Description Art. no. Quantity
• Assortment set Sub-TecPlus 0° / 15° / 20° for choosing the correct abutment with corresponding gingival height and angle comprising: • 20 parts + forceps
57115 1 unit
Angulated abutment, type P
• Type P = Angle over Plain
Angulated abutment, type E
• Type E = Angle over Edge
NewØ 3.0
*3
75
pRosTHeTics · s / Ri / Rs / RsX-line
Crowns and bridges
*1) Alloy recommendation see page 131*2) For information on torques see page 124*3) Dia. 3.0 available from second quarter, 2014 – Depending on authorities' approvals
Titanium angulated abutments
Description Art. no. Colour code Size Quantity
• Sub-TecPlus titanium angulated abutment 20° (angle over plain (type P) or edge (type E)) comprising: • Angulated abutment • Sub-TecPlus prosthesis screw • Sub-TecPlus technician screw Material: Titanium alloy Tool: Hexagon screwdriver 1.25 mm / slot screwdriver *1) *2)
57148 nn 20° P GH 1–2 S 3.25–3.75 / RI 3.75 1 unit
57149 nn 20° P GH 2.5–4 S 3.25–3.75 / RI 3.75 1 unit
57150 nn 20° E GH 1–2 S 3.25–3.75 / RI 3.75 1 unit
57151 nn 20° E GH 2.5–4 S 3.25–3.75 / RI .75 1 unit
57152 nnn 20° P GH 1–2 S / RI 4.1 1 unit
57153 nnn 20° P GH 2.5–4 S / RI 4.1 1 unit
57154 nnn 20° E GH 1–2 S / RI 4.1 1 unit
57155 nnn 20° E GH 2.5–4 S / RI 4.1 1 unit
57156 nnnn 20° P GH 1–2 S / RI 4.5 1 unit
57157 nnnn 20° P GH 2.5–4 S / RI 4.5 1 unit
57158 nnnn 20° E GH 1–2 S / RI 4.5 1 unit
57159 nnnn 20° E GH 2.5–4 S / RI 4.5 1 unit
57160 nnnnn 20° P GH 1–2 S / RI 5.5 1 unit
57161 nnnnn 20° P GH 2.5–4 S / RI 5.5 1 unit
57162 nnnnn 20° E GH 1–2 S / RI 5.5 1 unit
57163 nnnnn 20° E GH 2.5–4 S / RI 5.5 1 unit
Titanium abutments
Description Art. no. Colour code Size Quantity
• Sub-TecPlus titanium abutment, comprising: • Titanium abutment • Sub-TecPlus prosthesis screw • Sub-TecPlus technician screw
• At Ø 3.0: Prosthesis screw RS / RSX 3.0 • At Ø 3.0: Technician screw RS / RSX 3.0
Material: Titanium alloy Tool: Hexagon screwdriver 1.25 mm / slot screwdriver *1) *2)
57776 n GH 2.5–4 RS / RSX 3.0 1 unit
57116 nn GH 1–2 S 3.25–3.75 / RI 3.75 1 unit
57117 nn GH 2.5–4 S 3.25–3.75 / RI 3.75 1 unit
57120 nnn GH 1–2 S / RI 4.1 1 unit
57121 nnn GH 2.5–4 S / RI 4.1 1 unit
57124 nnnn GH 1–2 S / RI 4.5 1 unit
57125 nnnn GH 2.5–4 S / RI 4.5 1 unit
57128 nnnnn GH 1–2 S / RI 5.5 1 unit
57129 nnnnn GH 2.5–4 S / RI 5.5 1 unit
NewØ 3.0
*3
76
Titanium abutments
Description Art. no. Colour code Size Quantity
• Sub-Tec titanium abutment, conical comprising: • Titanium abutment • Prosthesis screw Hex 1.25 mm • Technician screw L9
• At Ø 3.0: Prosthesis screw RS / RSX 3.0 • At Ø 3.0: Technician screw RS / RSX 3.0 Material: Grade 4 titanium Tool: Hexagon screwdriver 1.25 mm / slot screwdriver *1) *2)
57775 n*3 RS / RSX 3.0 1 unit
56369 nn S 3.25–3.75 / RI 3.75 1 unit
56370 nnnn S / RI 4.1–4.5 1 unit
56371 nnnnn S / RI 5.5 1 unit
Universal abutment system
Description Art. no. Colour code Size Quantity
• Sub-Tec Universal comprising: • Universal base Hex • Sub-Burnout acrylic sleeve Universal • Sub-Tec Universal prosthesis screw • Sub-Tec Universal technician screw (black) Material: Titanium alloy Tool: Hexagon screwdriver 1.25 mm / slot screwdriver *1) *2)
55525 nn S 3.25–3.75 /RI 3.75
(Ø 3.8) 1 unit
55622 n S / RI 4.1 (Ø 4.3) 1 unit
55527 n S / RI 4.5 (Ø 4.7) 1 unit
55529 n S / RI 5.5 (Ø 5.7) 1 unit
• Sub-Tec Universal no Hex comprising: • Universal base no Hex • Sub-Burnout acrylic sleeve Universal • Sub-Tec Universal prosthesis screw • Sub-Tec Universal technician screw (black) Material: Titanium alloy Tool: Hexagon screwdriver 1.25 mm / slot screwdriver *1) *2)
55526 nn S 3.25–3.75 /RI 3.75
(Ø 3.8) 1 unit
55623 n S / RI 4.1 (Ø 4.3) 1 unit
55528 n S / RI 4.5 (Ø 4.7) 1 unit
55530 n S / RI 5.5 (Ø 5.7) 1 unit
*1) Alloy recommendation see page 131*2) For information on torques see page 124*3) Dia. 3.0 available from second quarter, 2014 – Depending on authorities' approvals
pRosTHeTics · s / Ri / Rs / RsX-line
16
Crowns and bridges
Ø
L1
6
NewØ 3.0
*3
77
Universal abutment system
Description Art. no. Colour code Size Quantity
• Internal reamer for Sub-Tec Universal for reworking the internal snug fit
55536 nnnnn S 3.25–5.5 / RI 3.75–5.5 1 unit
• External reamers for Sub-Tec Universal for reworking the external snug fit
55538 nnnn S 3.25–4.5 / RI 3.75–4.5 1 unit
55537 nnnnn S 3.25–5.5 / RI 3.75-5.5 1 unit
Gold cast-on abutment system
Description Art. no. Colour code Size Quantity
• Sub-Tec gold cast-on comprising: • Sub cast-on abutment • Sub-Burnout acrylic sleeve gold cast-on • Prosthesis screw Hex 1.25 mm • Technician screw L9 Material: Gold-platinum alloy Tool: Hexagon screwdriver 1.25 mm / slot screwdriver *1) *2)
55862 nn S 3.25–3.75 /RI 3.75
(Ø 3.8) 1 unit
55624 n S / RI 4.1 (Ø 4.3) 1 unit
56317 n S / RI 4.5 (Ø 4.7) 1 unit
56510 n S / RI 5.5 (Ø 5.7) 1 unit
• Sub-Tec gold cast-on no Hex comprising: • Sub cast-on abutment no Hex • Sub-Burnout acrylic sleeve gold cast-on • Prosthesis screw Hex 1.25 mm • Technician screw L9 Material: Gold-platinum alloy Tool: Hexagon screwdriver 1.25 mm / slot screwdriver *1) *2)
55873 nn S 3.25–3.75 /RI 3.75
(Ø 3.8) 1 unit
55625 n S / RI 4.1 (Ø 4.3) 1 unit
56325 n S / RI 4.5 (Ø 4.7) 1 unit
56515 n S / RI 5.5 (Ø 5.7) 1 unit
• Internal reamer for Sub-Tec gold cast-on for reworking the internal snug fit (only in combination with technician's screwdriver!)
53735 nnnnn S 3.25–5.5 /RI 3.75–5.5
1 unit
Crowns and bridges
pRosTHeTics · s / Ri / Rs / RsX-line
16
16
40
78
pRosTHeTics · s / Ri / Rs / RsX-line
Auxiliary parts
Description Art. no. Colour code Size Quantity
• MultiPlus insertion splint for determining the planned angulation
57532 MultiPlus system 1 unit
• MultiPlus bone shaper (optional) for angled implant bed preparation
57551 n S 3.25 1 unit
57541 n S 3.75 1 unit
57542 n S 4.1 1 unit
57543 n S 4.5 1 unit
• MultiPlus adjustment supporters for aligning the implant hex
57530 20° MultiPlus system 1 unit
57531 30° MultiPlus system 1 unit
Sub-Tec MultiPlus abutments
Description Art. no. Colour code Size Quantity
• Sub-Tec MultiPlus abutment 0° comprising: • Sub-Tec MultiPlus abutment 0° • MultiPlus positioning aid 0° Material: Titanium alloy (sterile packaged) Tool: Insertion tool for MultiPlus abutment 0° *2)
57505 nn GH 1 S 3.25–3.75 / RI 3.75 1 unit
57508 nn GH 3 S 3.25–3.75 / RI 3.75 1 unit
57506 n GH 1 S / RI 4.1 1 unit
57509 n GH 3 S / RI 4.1 1 unit
57507 n GH 1 S / RI 4.5 1 unit
57510 n GH 3 S / RI 4.5 1 unit
• Insertion tool for MultiPlus abutment 0° with ratchet connection
57533 MultiPlus system 1 unit
GH
*2) For information on torques see page 124
MultiPlus system
79
MultiPlus system
pRosTHeTics · s / Ri / Rs / RsX-line
Sub-Tec MultiPlus abutments
Description Art. no. Colour code Size Quantity
• Sub-Tec MultiPlus abutment 20° comprising: • Sub-Tec MultiPlus abutment 20° • MultiPlus positioning aid 20° • Prosthesis screw MultiPlus Material: Titanium alloy (sterile packaged) Tool: Hexagon screwdriver 1.25 mm / slot screwdriver *2)
57511 nn GH 2.3–0.6 S 3.25–3.75 / RI 3.75
1 unit
57514 nn GH 4.0–2.3 S 3.25–3.75 / RI 3.75
1 unit
57512 n GH 2.3–0.6 S / RI 4.1 1 unit
57515 n GH 4.0–2.3 S / RI 4.1 1 unit
57513 n GH 2.3–0.6 S / RI 4.5 1 unit
57516 n GH 4.0–2.3 S / RI 4.5 1 unit
• Sub-Tec MultiPlus abutment 30° comprising: • Sub-Tec MultiPlus abutment 30° • MultiPlus positioning aid 30° • Prosthesis screw MultiPlus Material: Titanium alloy (sterile packaged) Tool: Hexagon screwdriver 1.25 mm / slot screwdriver *2)
57517 nn GH 4.0–1.5 S 3.25–3.75 / RI 3.75
1 unit
57518 n GH 4.0–1.5 S / RI 4.1 1 unit
57519 n GH 4.0–1.5 S / RI 4.5 1 unit
Healing posts
Description Art. no. Colour code Size Quantity
• MultiPlus healing post (prefabricated gingival former) Material: Titanium alloy (sterile packaged) Tool: Hexagon screwdriver 1.25 mm
57520 MultiPlus system L5 1 unit
• MultiPlus healing post (prefabricated gingival former) Material: Titanium alloy (sterile packaged) Tool: Hexagon screwdriver 1.25 mm
57521 MultiPlus system L5 1 unit
GH
GH
GH
GH
80
CAD/CAM prosthetics MultiPlus System
Bar shapes
Description
• 4Dolder® bar joint 2.3 mm
• 4Dolder® bar joint 3.0 mm
• 4Dolder® bar attachment 3.0 mm
• Round bar 1.8 mm
• Horix bar 1.8 mm
• Horix element 1.8 mm
• Individual bar shapes / bar attachments
pRosTHeTics · s / Ri / Rs / RsX-line
BEGO CADBase (bar restorations and screw-retained bridges)
Medical no. System Implant diameter Material
MultiPlus BEGO Semados® MultiPlus Abutment level Bars and occlusally screw- retained bridges are available in the following materials:• Wirobond® MI+• BEGO Grade 5 titanium
81
CAD/CAM prosthetics MultiPlus System
Bar attachments / 3Locator® gauges
Description
• Bar attachments 1.8 mm (Ancora / Preci-Vertix)
• 3Locator® angle measurement gauge
pRosTHeTics · s / Ri / Rs / RsX-line
If you have any questions concerning customised CAD/CAM prosthetics from BEGO Medical GmbH (procedures or conditions),please do not hesitate to contact:
BEGO Medical GmbHWilhelm-Herbst-Str. 1 · 28359 Bremen, GermanyTel. +49 421 2028-0 · Fax +49 421 2028-174E-mail [email protected] · www.bego.com
CAD/CAM solution
Description Art. no. Colour code Size Quantity
• CAD positioner MultiPlus comprising: • MultiPlus CAD positioner with integrated MultiPlus secondary screw Material: Polyether-ether-ketone (PEEK) Tool: Hexagon screwdriver 1.25 mm *2)
57529 MultiPlus system 1 unit
6
82
pRosTHeTics · s / Ri / Rs / RsX-line
MultiPlus system
Impression sets
Description Art. no. Size Quantity
• MultiPlus closed tray impression, short/long (impression on MultiPlus posts with closed tray) comprising: • MultiPlus impression post • MultiPlus analog Material: Titanium alloy (sterile packaged) Tool: Hexagon screwdriver 1.25 mm *2)
57522 MultiPlus system L8 1 unit
57554 MultiPlus system L12 1 unit
• MultiPlus open tray impression (impression on MultiPlus posts with open tray) comprising: • MultiPlus impression post • Titanium screw L11 and L16 • MultiPlus analog Material: Titanium alloy (sterile packaged) Tool: Hexagon screwdriver 1.25 mm *2)
57523 MultiPlus system 1 unit
Implant analogs
Description Art. no. Colour code Size Quantity
• MultiPlus analogs 57524 MultiPlus system 1 unit
57525 MultiPlus system 4 units
Protection analog
Description Art. no. Colour code Size Quantity
• MultiPlus protection analog To protect the basal edges when finishing the prosthetics. Material: Titanium alloy
57537 MultiPlus system 4 units
L
8
3
List of manufacturers' registered trademarks, see page 111*1) Alloy recommendation see page 131*2) For information on torques see page 124
MultiPlus titanium abutment
Description Art. no. Colour code Size Quantity
• MultiPlus titanium abutment, comprising: • MultiPlus titanium abutment • MultiPlus secondary screw • MultiPlus technician screw Material: Titanium alloy (sterile packaged) Tool: Hexagon screwdriver 1.25 mm / slot screwdriver *2)
57526 MultiPlus system 1 unit
MultiPlus Universal abutment
Description Art. no. Colour code Size Quantity
• MultiPlus Universal comprising: • MultiPlus Universal burnout sleeve • MultiPlus secondary screw • MultiPlus technician screw Material: Polyoxymethylene (POM) Tool: Hexagon screwdriver 1.25 mm / slot screwdriver *1) *2)
57538 MultiPlus system 1 unit
• Internal reamer for MultiPlus for reworking the internal snug fit, incl. reamer handle
57540 MultiPlus system 1 unit
• External reamer for MultiPlus for reworking the external snug fit, incl. reamer handle
57539 MultiPlus system 1 unit
MultiPlus Gold cast-on abutment
Description Art. no. Colour code Size Quantity
• MultiPlus gold cast-on abutment, comprising: • MultiPlus cast-on abutment • MultiPlus Burnout sleeve gold cast-on • MultiPlus secondary screw • MultiPlus technician screw Material: Gold-platinum alloy Tool: Hexagon screwdriver 1.25 mm / slot screwdriver *1) *2)
57527 MultiPlus system 1 unit
• Internal reamer for MultiPlus for reworking the internal snug fit, incl. reamer handle
57540 MultiPlus system 1 unit
83
MultiPlus system
pRosTHeTics · s / Ri / Rs / RsX-line
11
11
10
84
pRosTHeTics · s / Ri / Rs / RsX-line
Ball attachment abutments
Description Art. no. Colour code Size Quantity
• Sub-Tec ball attachment 2Dalbo®-PLUS comprising: • Sub ball attachment • Female part 2Dalbo®-PLUS, complete (incl. retention insert) • Space holder • Spacer Material: Titanium alloy Tool: Insertion tool for ball attachment *2)
57552 nn GH 0 S 3.25–3.75 / RI 3.75 1 unit
57544 nn GH 3 S 3.25–3.75 / RI 3.75 1 unit
57546 nn GH 5 S 3.25–3.75 / RI 3.75 1 unit
57553 nn GH 0 S / RI 4.1–4.5 1 unit
57545 nn GH 3 S / RI 4.1–4.5 1 unit
57547 nn GH 5 S / RI 4.1–4.5 1 unit
• Sub-Tec ball attachment comprising: • Sub ball attachment without female part Material: Titanium alloy Tool: Insertion tool for ball attachment *2)
57631 nn GH 0 S 3.25–3.75 / RI 3.75 1 unit
57633 nn GH 3 S 3.25–3.75 / RI 3.75 1 unit
57635 nn GH 5 S 3.25–3.75 / RI 3.75 1 unit
57632 nn GH 0 S / RI 4.1–4.5 1 unit
57634 nn GH 3 S / RI 4.1–4.5 1 unit
57636 nn GH 5 S / RI 4.1–4.5 1 unit
• Insertion tool for ball attachment with ratchet connection
55880 L9 1 unit
L
GH
List of manufacturers' registered trademarks, see page 111*2) For information on torques see page 124
Hybrid prosthetics
85
Hybrid prosthetics
pRosTHeTics · s / Ri / Rs / RsX-line
Ball attachment impression 2Dalbo®
Description Art. no. Colour code Size Quantity
• Impression set ball attachment 2Dalbo®-PLUS (Impression on ball attachment) comprising: • Impression cap for ball attachment (red) • Ball attachment analog
55768 1 unit
Ball attachment female parts 2Dalbo®
Description Art. no. Colour code Size Quantity
• Female part 2Dalbo®-PLUS comprising: • Female part 2Dalbo®-PLUS, complete (incl. retention insert) • Space holder Material: Grade 4 titanium Tool: 2Dalbo®-PLUS activator / deactivator
55769 1 unit
• 2Dalbo®-PLUS activator / deactivator 55773 1 unit
• Retention insert 2Dalbo®-PLUS Material: Precious metal Tool: 2Dalbo®-PLUS activator / deactivator
55776 1 unit
Ø 4
3.4
3.2
Ø 3.6
86
Ball attachment implant analog PRECI-CLIX
Description Art. no. Colour code Size Quantity
• Model analog PRECI-CLIX 57089 2 units
Ball attachment female parts PRECI-CLIX
Description Art. no. Colour code Size Quantity
• Laboratory set ball attachment Mini comprising: • PRECI-CLIX housing • PRECI-CLIX duplicating auxiliary • PRECI-CLIX female part, yellow • PRECI-CLIX space holder Material: Titanium alloy Tool: PRECI-CLIX insertion tool
57085 2 units
• PRECI-CLIX insertion tool comprising: • Insertion tool for PRECI-CLIX female parts
57090 1 unit
• PRECI-CLIX female part, white Withdrawal force: 600 g; 5.9 N comprising: • PRECI-CLIX female part, white Material: Polyoxymethylene (POM) Tool: PRECI-CLIX insertion tool
57087 2 units
• PRECI-CLIX female part, yellow Withdrawal force: 800 g; 7.9 N comprising: • PRECI-CLIX female part, yellow Material: Polyoxymethylene (POM) Tool: PRECI-CLIX insertion tool
57086 2 units
• PRECI-CLIX female part, red Withdrawal force: 1000 g; 9.8 N comprising: • PRECI-CLIX female part, red Material: Polyoxymethylene (POM) Tool: PRECI-CLIX insertion tool
57088 2 units
pRosTHeTics · s / Ri / Rs / RsX-line
Ø 4
2.6
List of manufacturers' registered trademarks, see page 111*2) For information on torques see page 124
Hybrid prosthetics
87
Hybrid prosthetics
pRosTHeTics · s / Ri / Rs / RsX-line
Magnetic abutments
Description Art. no. Colour code Size Quantity
• Sub-Tec magnetic abutment for restorations with 5STECO® Titanium Magnetics Material: Grade 4 titanium with integrated cobalt samarium magnet Tool: Insertion tool for magnetic abutment *2)
55850 nnnn S 3.25–4.5 /RI 3.75–4.5 L3
1 unit
• Insertion tool for magnetic abutment with ratchet connection
55852 L10 1 unit
Magnet impression
Description Art. no. Colour code Size Quantity
• Sub-Dent magnetic impression (impression on magnetic abutment) comprising: • Magnetic impression post • Magnetic implant analog
55853 1 unit
Magnetic female parts
Description Art. no. Colour code Size Quantity
• Denture magnet for Sub-Tec magnetic abutment comprising: • Denture magnet • Position sleeve Material: Grade 4 titanium with integrated cobalt samarium magnet
55872 1 unit
3.9
Ø 4
.8
2.7
Ø 4.8
L
7
88
pRosTHeTics · s / Ri / Rs / RsX-line
Bar abutments
Description Art. no. Colour code Size Quantity
• Wirobond® MI round bar 40 mm Material: Wirobond® MI (CoCr alloy) *1)
56965 Ø 1.8 mm 1 unit
• 4Dolder® bar joint attachment 3.0 – Wirobond® MI Material: Wirobond® MI (CoCr alloy) *1)
55959 1 unit
• Sub-Tec Wirobond® MI bar abutment comprising: • Wirobond® MI bar abutment • Sub-TecPlus prosthesis screw • Sub-TecPlus technician screw Material: Wirobond® MI (CoCr alloy) Tool: Hexagon screwdriver 1.25 mm / slot screwdriver *1) *2)
55956 nnnn S 3.25–4.5 / RI 3.75–4.5 1 unit
• 4Dolder® bar joint attachment 3.0 – Titanium Material: Grade 4 titanium *1)
55928 1 unit
• Sub-Tec titanium bar abutment comprising: • Titanium bar abutment • Sub-TecPlus prosthesis screw • Sub-TecPlus technician screw Material: Grade 4 titanium Tool: Hexagon screwdriver 1.25 mm / slot screwdriver *1) *2)
55866 nnnn S 3.25–4.5 / RI 3.75–4.5 1 unit
50
50
List of manufacturers' registered trademarks, see page 111*1) Alloy recommendation see page 131*2) For information on torques see page 124
Hybrid prosthetics
7.5
Ø 4.5
7.5
Ø 4.5
89
Hybrid prosthetics
pRosTHeTics · s / Ri / Rs / RsX-line
Bar female parts
Description Art. no. Colour code Size Quantity
• Round bar system "PRECI-HORIX" comprising: • 1 insertion tool • 6 space-holders • 6 yellow female parts • 6 metal housings
55775 1 unit
• 4Dolder® bar - female part, Gold comprising: • Resilience rail • Female part with retention for plastic Material: Gold alloy
55922 1 unit
• 4Dolder® bar - female part, Palladium comprising: • Resilience rail • Female part with retention for plastic Material: Palladium alloy
57573 1 unit
Hybrid prosthetics
90
Easy-Con abutments
Description Art. no. Colour code Size Quantity
• Sub-Tec Easy-Con abutment Material: Titanium alloy with TiN coating Tool: Insertion tool for 3Locator®
*2)
57743 nn S / RI 3.75–4.1 L1 1 unit
57744 nn S / RI 3.75–4.1 L2 1 unit
57745 nn S / RI 3.75–4.1 L3 1 unit
57746 nn S / RI 3.75–4.1 L4 1 unit
57747 n S / RI 4.5 L1 1 unit
57748 n S / RI 4.5 L2 1 unit
57749 n S / RI 4.5 L3 1 unit
57750 n S / RI 4.5 L4 1 unit
• Insertion tool for 3Locator® with ratchet connection (also for Easy-Con)
57008 L10 1 unit
Easy-Con impression
Description Art. no. Colour code Size Quantity
• Easy-Con impression coping (Impression on Easy-Con)
57751 4 units
• Easy-Con analog 57760 4 units
pRosTHeTics · s / Ri / Rs / RsX-line
L
List of manufacturers' registered trademarks, see page 111*2) For information on torques see page 124
Hybrid prosthetics
Easy-Con female parts
Description Art. no. Colour code Size Quantity
• Easy-Con laboratory set comprising:
• Retention insert, transparent, pink and blue
• Block-out ring • Retention cap • Production insert (black) Material: Titanium alloy / polyamide (PA12) Tool: Easy-Con instrument
57752 2 units
• Easy-Con instrument for screw-fitting, removing and reposi-tioning the retention inserts, insertion device for Easy-Con abutment
57753 1 unit
• Easy-Con production insert (black) Material: Polyamide (PA12)
57754 4 units
• Easy-Con retention insert (blue) Withdrawal force: 680 g; 6.7 N; 0-10° Material: Polyamide (PA12)
57755 4 units
• Easy-Con retention insert (pink) Withdrawal force: 1361 g; 13.4 N; 0-10° Material: Polyamide (PA12)
57756 4 units
• Easy-Con retention insert (transparent) Withdrawal force: 2268 g; 22.3 N; 0-10° Material: Polyamide (PA12)
57757 4 units
• Easy-Con retention insert (red) Withdrawal force: 680 g; 6.7 N; 10–20° Material: Polyamide (PA12)
57758 4 units
• Easy-Con retention insert (green) Withdrawal force: 1814 g; 17.8 N; 10–20° Material: Polyamide (PA12)
57759 4 units
91
pRosTHeTics · s / Ri / Rs / RsX-line
92
pRosTHeTics · s / Ri / Rs / RsX-line
3Locator® abutments
Description Art. no. Colour code Size Quantity
• Sub-Tec 3Locator® abutment Material: Titanium alloy with TiN coating Tool: Insertion tool for 3Locator® *2)
57011 nn S / RI 3.75–4.1 L1 1 unit
57012 nn S / RI 3.75–4.1 L2 1 unit
57013 nn S / RI 3.75–4.1 L3 1 unit
57014 nn S / RI 3.75–4.1 L4 1 unit
57021 n S / RI 4.5 L1 1 unit
57022 n S / RI 4.5 L2 1 unit
57023 n S / RI 4.5 L3 1 unit
57024 n S / RI 4.5 L4 1 unit
• Insertion tool for 3Locator® with ratchet connection (also for Easy-Con)
57008 L10 1 unit
3Locator® impression
Description Art. no. Colour code Size Quantity
• 3Locator® impression coping (impression on 3Locator®)
57050 4 units
• 3Locator® analog 57040 4 units
3Locator® auxiliary parts
Description Art. no. Colour code Size Quantity
• 3Locator® parallel post for angle measurement
57051 4 units
• 3Locator® angle measurement gauge 57052 1 unit
L
1.5
L
Ø 5.4
4.5
Hybrid prosthetics
List of manufacturers' registered trademarks, see page 111*2) For information on torques see page 124
93
Hybrid prosthetics
pRosTHeTics · s / Ri / Rs / RsX-line
3Locator® female parts
Description Art. no. Colour code Size Quantity
• 3Locator® laboratory set comprising: • Retention insert, transparent, pink and blue • Block-out ring • Retention cap • Production insert, black Material: Titanium alloy Tool: 3Locator® instrument (3-pieces)
57042 2 units
• 3Locator® instrument (3-pieces) for screw-fitting, removing and reposi-tioning the retention inserts, insertion device for 3Locator® attachment
57053 1 unit
• 3Locator® production insert (black) Material: Polyether
57044 4 units
• 3Locator® retention insert (blue) Withdrawal force: 680 g; 6.7 N; 0–10° Material: Nylon
57047 4 units
• 3Locator® retention insert (pink) Withdrawal force: 1361 g; 13.4 N; 0–10° Material: Nylon
57046 4 units
• 3Locator® retention insert (transparent) Withdrawal force: 2268 g; 22.3 N; 0–10° Material: Nylon
57045 4 units
• 3Locator® retention insert (red) Withdrawal force: 458 g; 4.5 N; 10–20° Material: Nylon
57049 4 units
• 3Locator® retention insert (green) Withdrawal force: 1814 g; 17.8 N; 10–20° Material: Nylon
57048 4 units
Ø 5.5
2.5
94
pRosTHeTics · s / Ri / Rs / RsX-line
Technician screws
Description Art. no. Colour code Size Quantity
• Technician screw RS / RSX 3.0 57783 n for Sub-TecPlus abutments RS / RSX 3.0 (straight or angled), Sub-Tec titanium abutments RS / RSX 3.0, Sub-Tec CAD/CAM titanium adhesive abutment RS / RSX 3.0, Sub-Tec CAD/CAM TiBase RS / RSX 3.0
1 unit
• Technician screw L9 53762 nnnnn for Sub-Tec gold cast-on, Sub-Tec temporary abut-ment, Sub-Tec temporary PEEK abutment, Sub-Tec titanium abutment, Sub-Tec Wirobond® MI abutments
3 units
• Technician screw Sub-TecPlus 57028 nnnnn for Sub-TecPlus abutments (straight and angled), BeCe® Sub-Tec ceramic abutments, Sub-Tec CAD/CAM titanium adhesive abutment, Sub-Tec temporary titanium abutments, Sub-Tec bar system, Sub-Tec CAD/CAM TiBase L
1 unit
• Technician screws Sub-Tec Universal 55552 nnnn for Sub-Tec Universal 1 unit
55553 n for Sub-Tec Universal 1 unit
• Technician screw MultiPlus (M1.4) 57536 MultiPlus system 1 unit
Screws
*3) Dia. 3.0 available from second quarter, 2014 – Depending on authorities' approvals
NewØ 3.0
*3
95
pRosTHeTics · s / Ri / Rs / RsX-line
Prosthesis screws
Description Art. no. Colour code Size Quantity
• Prosthesis screw RS / RSX 3.0 57782 n for Sub-TecPlus abutments RS / RSX 3.0 (straight or angled), Sub-Tec titanium abutments RS / RSX 3.0, Sub-Tec CAD/CAM titanium adhesive abutment RS / RSX 3.0, Sub-Tec CAD/CAM TiBase RS / RSX 3.0
1 unit
• Prosthesis screw RS / RSX 3.0 – for PEEK
57784 n for Sub-Tec CAD positioner RS / RSX 3.0
1 unit
• Prosthesis screw Hex 1.25 mm 53999 nnnnn for Sub-Tec gold cast-on, Sub-Tec temporary abut-ment, Sub-Tec temporary PEEK abutment, Sub-Tec titanium abutment, Sub-Tec bar system, Sub-Tec Wirobond® MI abutments, Sub-Tec CAD positioner
1 unit
• Prosthesis screw for ceramic abutment 56094 nnnnn for BeCe® Sub-Tec ceramic abutments
1 unit
• Prosthesis screw Sub-TecPlus 57031 nnnnn for Sub-TecPlus abutments (straight and angled), Sub-Tec CAD/CAM titani-um adhesive abutments, Sub-Tec temporary titanium abutments, Sub-Tec bar system (as of Q2 2013), Sub-Tec CAD/CAM TiBase L
1 unit
• Prosthesis screws Sub-Tec Universal 55534 nnnn for Sub-Tec Universal 1 unit
55535 n for Sub-Tec Universal 1 unit
• Secondary screw MultiPlus (M1.4) 57534 MultiPlus system 1 unit
• Prosthesis screw MultiPlus (M1.8) 57535 nnnn for Sub-Tec MultiPlus abutments 20/30°
1 unit
Screws
NewØ 3.0
*3
NewØ 3.0
*3
96
Secondary connection
Description Art. no. Colour code Size Quantity
• Secondary screw 1.2 mm with Hex 0.9 L 5 Tool: Screwdriver for secondary connection
56361 1 unit
• Hexagon screwdriver for secondary connection Hex 0.9 mm
56365 1 unit
5
18
pRosTHeTics · s / Ri / Rs / RsX-line
Screws
97
pRosTHeTics · mini-line
98
CAD/CAM prosthetics
pRosTHeTics · mini-line
BEGO CADBase (bar restorations and screw-retained bridges)
Medical no. System Implant diameter Material
Mini BEGO Semados® Mini-Line 2.72.93.1
Bars are available in the following materials:• Wirobond® MI+• BEGO Grade 5 titanium
If you have any questions concerning customised CAD/CAM prosthetics from BEGO Medical GmbH (procedures or conditions), please do not hesitate to contact:
BEGO Medical GmbHWilhelm-Herbst-Str. 1 · 28359 Bremen, GermanyTel. +49 421 2028-0 · Fax +49 421 2028-174E-mail [email protected] · www.bego.com
List of manufacturers' registered trademarks, see page 111
99
CAD/CAM prosthetics
Bar shapes
Description
• 4Dolder® bar joint 2.3 mm
• 4Dolder® bar joint 3.0 mm
• 4Dolder® bar attachment 3.0 mm
• Round bar 1.8 mm
• Horix bar 1.8 mm
• Horix element 1.8 mm
• Individual bar shapes / bar attachments
Bar attachments / 3Locator® gauges
Description
• Bar attachments 1.8 mm (Ancora / Preci-Vertix)
• 3Locator® angle measurement gauge
pRosTHeTics · mini-line
pRosTHeTics · mini-line
CAD/CAM solutions
Description Art. no. Colour code Size Quantity
• Mini CAD positioner comprising: • Mini CAD positioner • Mini prosthesis screw Material: Polyether-ether-ketone (PEEK) Tool: Hexagon screwdriver 1.25 mm *2)
57330 n Mini 2.7–3.1 1 unit
CAD/CAM prosthetics
If you have any questions concerning customised CAD/CAM prosthetics from BEGO Medical GmbH (procedures or conditions), please do not hesitate to contact:
BEGO Medical GmbHWilhelm-Herbst-Str. 1 · 28359 Bremen, GermanyTel. +49 421 2028-0 · Fax +49 421 2028-174E-mail [email protected] · www.bego.com
*2) For information on torques see page 124
100
Impression taking and model making
pRosTHeTics · mini-line
Impression set
Description Art. no. Colour code Size Quantity
• Mini open tray impression (implant-level impression with open tray) comprising: • Mini impression post • Titanium screw L15 and L19 • Mini implant analog Tool: Hexagon screwdriver 1.25 mm / slot screwdriver *2)
56959 n Mini 2.7–3.1 1 unit
Implant analogs
Description Art. no. Colour code Size Quantity
• Implant analog Mini 56982 n Mini 2.7–3.1 1 unit
11
101
pRosTHeTics · mini-line
Wirobond® MI abutments
Description Art. no. Colour code Size Quantity
• Wirobond® MI Mini abutment, conical comprising: • Wirobond® MI Mini abutment • Mini prosthesis screw • Mini technician screw Material: Wirobond® MI (CoCr alloy) Tool: Hexagon screwdriver 1.25 mm / slot screwdriver *1) *2)
56960 n Mini 2.9–3.1 1 unit
Gold cast-on abutment system
Description Art. no. Colour code Size Quantity
• Gold cast-on Mini comprising: • Mini cast-on abutment • Sub-Burnout acrylic sleeve gold cast-on • Mini technician screw, conical • Mini prosthesis screw, conical Material: Gold-platinum alloy Tool: Hexagon screwdriver 1.25 mm / slot screwdriver *1) *2)
57320 n Mini 2.9–3.1 1 unit
• Internal reamer for gold cast-on Mini for reworking the internal snug fit (only in combination with technician's screwdriver!)
57323 n Mini 2.9–3.1 1 unit1
01
6
42
Crowns
*1) Alloy recommendation see page 131*2) For information on torques see page 124
102
Hybrid prosthetics
pRosTHeTics · mini-line
Ball attachment abutments
Description Art. no. Colour code Size Quantity
• Ball attachment Mini Material: Titanium alloy Tool: Insertion tool for ball attachment *2)
56968 n Mini 2.9–3.1 L1.5 1 unit
57055 n Mini 2.9–3.1 L4 1 unit
• Insertion tool for ball attachment with ratchet connection
55880 L9 1 unit
Ball attachment implant analog PRECI-CLIX
Description Art. no. Colour code Size Quantity
• PRECI-CLIX attachment analog 57089 2 units
Ball attachment female parts PRECI-CLIX
Description Art. no. Colour code Size Quantity
• Laboratory set ball attachment Mini comprising: • PRECI-CLIX housing • PRECI-CLIX duplicating auxiliary • PRECI-CLIX female part, yellow • PRECI-CLIX space holder Material: Titanium alloy Tool: PRECI-CLIX insertion tool
57085 2 units
• PRECI-CLIX insertion tool comprising: • Insertion tool for PRECI-CLIX female parts
57090 1 unit
• PRECI-CLIX female part, white Withdrawal force: 600 g; 5.9 N comprising: • PRECI-CLIX female part, white Material: Polyoxymethylene (POM) Tool: PRECI-CLIX insertion tool
57087 2 units
• PRECI-CLIX female part, yellow Withdrawal force: 800 g; 7.9 N comprising: • PRECI-CLIX female part, yellow Material: Polyoxymethylene (POM) Tool: PRECI-CLIX insertion tool
57086 2 units
• PRECI-CLIX female part, red Withdrawal force: 1000 g; 9.8 N comprising: • PRECI-CLIX female part, red Material: Polyoxymethylene (POM) Tool: PRECI-CLIX insertion tool
57088 2 units
L
L
Ø 4
2.6
103
pRosTHeTics · mini-line
Ball attachment impression 2Dalbo®
Description Art. no. Colour code Size Quantity
• Impression set ball attachment 2Dalbo®-PLUS (Impression on ball attachment) comprising: • Impression cap for ball attachment (red) • Ball attachment analog
55768 1 unit
Ball attachment female parts 2Dalbo®
Description Art. no. Colour code Size Quantity
• Female part 2Dalbo®-PLUS comprising: • Female part 2Dalbo®-PLUS, complete (incl. retention insert) • Space holder Material: Grade 4 titanium Tool: 2Dalbo®-PLUS activator / deactivator
55769 1 unit
• 2Dalbo®-PLUS activator / deactivator 55773 1 unit
• Retention insert 2Dalbo®-PLUS Material: Precious metal Tool: 2Dalbo®-PLUS activator / deactivator
55776 1 unit
Ø 4
3.4
3.2
Ø 3.6
List of manufacturers' registered trademarks, see page 111*1) Alloy recommendation see page 131*2) For information on torques see page 124
Hybrid prosthetics
104
Hybrid prosthetics
pRosTHeTics · mini-line
Bar abutments
Description Art. no. Colour code Size Quantity
• Wirobond® MI round bar 40 mm Material: Wirobond® MI (CoCr alloy)
56965 Ø 1.8 mm 1 unit
• 4Dolder® bar joint attachment 3.0 – Wirobond® MI Material: Wirobond® MI (CoCr alloy) *1)
55959 1 unit
• Wirobond® MI Mini bar attachment comprising: • Wirobond® MI bar attachment Mini • Mini prosthesis screw • Mini technician screw Material: Wirobond® MI (CoCr alloy) Tool: Hexagon screwdriver 1.25 mm / slot screwdriver *1) *2)
56961 n Mini 2.7–3.1 1 unit
Bar female parts
Description Art. no. Colour code Size Quantity
• Round bar system "PRECI-HORIX" comprising: • 1 insertion tool • 6 space-holders • 6 yellow female parts • 6 metal housings
55775 1 unit
• 4Dolder® bar – female part, Gold comprising: • Resilience rail • Female part with retention for plastic Material: Gold alloy
55922 1 unit
• 4Dolder® bar – female part, Palladium comprising: • Resilience rail • Female part with retention for plastic Material: Palladium alloy
57573 1 unit
50
50
50
50
50
12
105
pRosTHeTics · mini-line
Easy-Con abutments
Description Art. no. Colour code Size Quantity
• Easy-Con Mini Material: Titanium alloy with TiN coating Tool: Insertion tool for 3Locator®
*2)
57623 n Mini 3.1 L1.5 1 unit
57624 n Mini 3.1 L2.5 1 unit
57625 n Mini 3.1 L3.5 1 unit
• Insertion tool for 3Locator® with ratchet connection (also for Easy-Con)
57008 L10 1 unit
Easy-Con impression
Description Art. no. Colour code Size Quantity
• Easy-Con impression coping (Impression on Easy-Con)
57751 4 units
• Easy-Con analog 57760 4 units
L
L
List of manufacturers' registered trademarks, see page 111*1) Alloy recommendation see page 131*2) For information on torques see page 124
Hybrid prosthetics
106
Hybrid prosthetics
pRosTHeTics · mini-line
Easy-Con female parts
Description Art. no. Colour code Size Quantity
• Easy-Con laboratory set comprising: • Retention insert, transparent, pink and blue • Block-out ring: • Retention cap: • Production insert, black Material: Titanium alloy / polyamide (PA12) Tool: Easy-Con instrument
57752 2 units
• Easy-Con instrument for screw-fitting, removing and repositioning the retention inserts, insertion device for Easy-Con abutment
57753 1 unit
• Easy-Con production insert (black) Material: Polyamide (PA12)
57754 4 units
• Easy-Con retention insert (blue) Withdrawal force: 680 g; 6.7 N; 0–10°
Material: Polyamide (PA12)
57755 4 units
• Easy-Con retention insert (pink) Withdrawal force: 1361 g; 13.4 N; 0–10°
Material: Polyamide (PA12)
57756 4 units
• Easy-Con retention insert (transparent) Withdrawal force: 2268 g; 22.3 N; 0–10°
Material: Polyamide (PA12)
57757 4 units
• Easy-Con retention insert (red) Withdrawal force: 680 g; 6.7 N; 10–20°
Material: Polyamide (PA12)
57758 4 units
• Easy-Con retention insert (green) Withdrawal force: 1814 g; 17.8 N; 10–20°
Material: Polyamide (PA12)
57759 4 units
107
pRosTHeTics · mini-line
Technician screws
Description Art. no. Colour code Size Quantity
• Mini technician screw 56984 n for Wirobond® MI Mini
bar abutment and
Wirobond® MI Mini
abutments, conical
1 unit
• Mini technician screw, conical 57322 n for Mini Gold cast-on 1 unit
Prosthesis screws
Description Art. no. Colour code Size Quantity
• Mini prosthesis screw 56983 n for Wirobond® MI Mini
bar abutment and
Wirobond® MI Mini
abutments, conical,
Mini CAD positioner
1 unit
• Mini prosthesis screw, conical 57321 n for Mini Gold cast-on 1 unit
Screws
108
An overview of the models
Large-scale models 110
Demonstration material 111
109
demo models / maTeRials
110
demo models / maTeRials
Large-scale models
Description Art. no. Colour code Size Quantity
• Large-scale models – demonstration suitcase 57328 1 unit
• BEGO Semados® S-implant large-scale model
55566 1 unit
• BEGO Semados® RI-implant large-scale model
55699 1 unit
• BEGO Semados® RSX-implant large-scale model
56750 1 unit
• BEGO Semados® Mini implant large-scale model
57095 1 unit
111
Demonstration materials
Description Art. no. Colour code Size Quantity
• Upper jaw demonstration model Clear acrylic model
56096 1 unit
• Training jaw (lower) 55547 1 unit
• BEGO Semados® S Demo implants including cover screw and titanium insertion post Material: Titanium (non-sterile packaged) Not for use on patients!
55543 1 unit
• BEGO Semados® RI Demo implants including cover screw and titanium insertion post Material: Titanium (non-sterile packaged) Not for use on patients!
55760 1 unit
• BEGO Semados® RS Demo implants including cover screw and titanium insertion post Material: Titanium (non-sterile packaged) Not for use on patients!
56751 1 unit
• BEGO Semados® RSX Demo implants including cover screw and titanium insertion post Material: Titanium (non-sterile packaged)
Not for use on patients!
56752 1 unit
• BEGO Semados® Mini Demo implants including cover screw and titanium insertion post Material: Titanium (non-sterile packaged) Not for use on patients!
55709 1 unit
demo models / maTeRials
2Dalbo® is a registered trademark of Cendres & Métaux SA, Biel/Bienne, Switzerland3Locator® is a registered trademark of Zest Anchors Inc., CA, USA4Dolder® is a registered trademark of Prof. Eugen Dolder, formerly Director of the School of Dentistry at the University of Zurich, Switzerland.5STECO® is a registered trademark of steco-system-technik GmbH & Co. KG, Hamburg, Germany
112
An overview of the service
Material costs overview 114
Torque specifications 126
Material specifications 128
Index 140
113
seRVice
114
seRVice · maTeRial cosTs oVeRVieW
BEGO Semados® S / RI / RS / RSX-Line · Crowns and bridges
Material costs for each indication
Cemented single crown (titanium)
Restoration Designation Number
• Sub system BEGO Semados® S / RI / RS / RSX implant 1
Healing post (gingival former) 1
Sub-Dent Open tray impression / Sub-Dent Closed tray impression 1
Sub-TecPlus Titanium abutment (0°, GH 1–2 or 2.5–4) 1
Total
Cemented single crown (Wirobond® MI; CoCr alloy)
Restoration Designation Number
• Sub system BEGO Semados® S / RI / RS / RSX implant 1
Healing post (gingival former) 1
Sub-Dent Open tray impression / Sub-Dent Closed tray impression 1
Sub-TecPlus Wirobond® MI abutment (0°, GH 1–2 or 2.5–4) 1
Total
Cemented single crown (ceramic; zirconium dioxide)
Restoration Designation Number
• Sub system BEGO Semados® S / RI / RS / RSX implant 1
Healing post (gingival former) 1
Sub-Dent Open tray impression / Sub-Dent Closed tray impression 1
BeCe® Sub-Tec ceramic abutment 1
Total
Cemented single crown (titanium, 15°/20° angle)
Restoration Designation Number
• Sub system BEGO Semados® S / RI / RS / RSX implant 1
Healing post (gingival former) 1
Sub-Dent Open tray impression / Sub-Dent Closed tray impression 1
Sub-TecPlus Titanium angulated abutment 15°/20° (Type P/E, GH 1–2 or 2.5–4) 1
Total
115
seRVice · maTeRial cosTs oVeRVieW
Cemented single crown (Wirobond® MI; CoCr alloy 15°/20° angle)
Restoration Designation Number
• Sub system BEGO Semados® S / RI / RS / RSX implant 1
Healing post (gingival former) 1
Sub-Dent Open tray impression / Sub-Dent Closed tray impression 1
Sub-TecPlus Wirobond® MI angulated abut. 15°/20° (Type P/E, GH 1–2 or 2.5–4) 1
Total
Single crown, cemented or occlusally screw-retained (gold)
Restoration Designation Number
• Sub system BEGO Semados® S / RI / RS / RSX implant 1
Healing post (gingival former) 1
Sub-Dent Open tray impression / Sub-Dent Closed tray impression 1
Sub-Tec Gold cast-on 1
Total
Single crown, cemented or occlusally screw-retained (non-precious)
Restoration Designation Number
• Sub system BEGO Semados® S / RI / RS / RSX implant 1
Healing post (gingival former) 1
Sub-Dent Open tray impression / Sub-Dent Closed tray impression 1
Sub-Tec Universal 1
Total
BEGO Semados® S / RI / RS / RSX-Line · Crowns and bridges
Material costs for each indication
List of manufacturers' registered trademarks, see page 111
116
seRVice · maTeRial cosTs oVeRVieW
Bridge cemented on 2 implants (titanium)
Restoration Designation Number
• Sub system BEGO Semados® S / RI / RS / RSX implant 2
Healing post (gingival former) 2
Sub-Dent Open tray impression / Sub-Dent Closed tray impression 2
Sub-TecPlus Titanium abutment (0°, GH 1–2 or 2.5–4) 2
Total
Bridge cemented on 2 implants (Wirobond® MI; CoCr alloy)
Restoration Designation Number
• Sub system BEGO Semados® S / RI / RS / RSX implant 2
Healing post (gingival former) 2
Sub-Dent Open tray impression / Sub-Dent Closed tray impression 2
Sub-TecPlus Wirobond® MI abutment (0°, GH 1–2 or 2.5–4) 2
Total
Bridge occlusally screw-retained on 2 implants (gold)
Restoration Designation Number
• Sub system BEGO Semados® S / RI / RS / RSX implant 2
Healing post (gingival former) 2
Sub-Dent Open tray impression / Sub-Dent Closed tray impression 2
Sub-Tec Gold cast-on no Hex 2
Total
Bridge occlusally screw-retained on 2 implants (non-precious)
Restoration Designation Number
• Sub system BEGO Semados® S / RI / RS / RSX implant 2
Healing post (gingival former) 2
Sub-Dent Open tray impression / Sub-Dent Closed tray impression 2
Sub-Tec Universal no Hex 2
Total
BEGO Semados® S / RI / RS / RSX-Line · Crowns and bridges
Material costs for each indication
117
seRVice · maTeRial cosTs oVeRVieW
Ball attachment restoration on 2 implants
Restoration Designation Number
• Sub system BEGO Semados® S / RI / RS / RSX implant 2
Healing post (gingival former) 2
Sub-Dent Open tray impression / Sub-Dent Closed tray impression 2
Sub-Tec ball attachment 2Dalbo®-PLUS 2
Total
Easy-Con restoration on 2 implants
Restoration Designation Number
• Sub system BEGO Semados® S / RI / RS / RSX implant 2
Healing post (gingival former) 2
Easy-Con impression coping 0.5
Easy-Con analog 0.5
Sub-Tec Easy-Con abutment 2
Easy-Con laboratory set 1
Total
Magnetic restoration on 2 implants
Restoration Designation Number
• Sub system BEGO Semados® S / RI / RS / RSX implant 2
Healing post (gingival former) 2
Sub-Dent magnet impression 2
Sub-Tec magnetic abutment (5STECO® Titanium Magnetics) 2
Denture magnet 2
Total
BEGO Semados® S / RI / RS / RSX-Line · Hybrid prosthetics
Material costs for each indication
List of manufacturers' registered trademarks, see page 111
118
seRVice · maTeRial cosTs oVeRVieW
Bar restoration on 4 implants (titanium)
Restoration Designation Number
• Sub system BEGO Semados® S / RI / RS / RSX implant 4
Healing post (gingival former) 4
Sub-Dent Open tray impression / Sub-Dent Closed tray impression 4
Sub-Tec titanium bar abutment 4
4Dolder® bar joint attachment 3.0 – titanium 1
4Dolder® bar – female part, Palladium 1
Total
Bar restoration on 4 implants (Wirobond® MI; CoCr alloy)
Restoration Designation Number
• Sub system BEGO Semados® S / RI / RS / RSX implant 4
Healing post (gingival former) 4
Sub-Dent Open tray impression / Sub-Dent Closed tray impression 4
Sub-Tec Wirobond® MI bar abutment 4
Dolder® bar joint attachment 3.0 – Wirobond® MI 1
4Dolder® bar – female part, Gold 1
Total
MultiPlus system on 4 implants
Restoration Designation Number
• MultiPlus system BEGO Semados® S / RI / RS / RSX implant 4
Sub-Tec MultiPlus abutment 0° 2
Sub-Tec MultiPlus abutment 20°/ 30° 2
MultiPlus healing post 4
MultiPlus open tray impression / MultiPlus closed tray impression 4
MultiPlus Titanium abutment 4
Total
BEGO Semados® S / RI / RS / RSX-Line · Hybrid prosthetics
Material costs for each indication
119
seRVice · maTeRial cosTs oVeRVieW
Bar restoration on 4 implants (non-precious; customised fabrication)
Restoration Designation Number
• Sub system BEGO Semados® S / RI / RS / RSX implant 4
Healing post (gingival former) 4
Sub-Dent Open tray impression / Sub-Dent Closed tray impression 4
Sub-Tec Universal no Hex 4
4Dolder® bar – female part, Gold 1
Total
Composition of the prefabricated BEGO Semados® S / RI / RS / RSX sets
• BEGO Semados® implant (S / RI / RS / RSX): Implant and implant cover screw
• Sub-Dent Impression Set (open / closed): Impression post, implant analog and titanium screw (impression post cap with closed tray impression)
• Sub-Tec Abutment Set: Abutment, prosthesis screw and technician screw
BEGO Semados® S / RI / RS / RSX-Line · Hybrid prosthetics
Material costs for each indication
120
seRVice · maTeRial cosTs oVeRVieW
Cemented single crown (Wirobond® MI; CoCr alloy)
Restoration Designation Number
• Mini-Line BEGO Semados® Mini implant 1
Mini healing post (gingival former) 1
Mini Open tray impression 1
Wirobond® MI Mini abutment, conical 1
Total
Cemented single crown (Gold cast-on Mini)
Restoration Designation Number
• Mini-Line BEGO Semados® Mini implant 1
Mini healing post (gingival former) 1
Mini Open tray impression 1
Mini Gold cast-on 1
Total
BEGO Semados® Mini-Line · Crown restoration
Material costs for each indication
121
seRVice · maTeRial cosTs oVeRVieW
Ball attachment restoration on 2 implants
Restoration Designation Number
• Mini-Line BEGO Semados® Mini implant 2
Mini healing post (gingival former) 2
Mini Open tray impression 2
Mini ball attachment 2
PRECI-CLIX laboratory set Mini ball attachment 1
Total
Bar restoration on 4 implants in the mandible (Wirobond® MI; CoCr alloy)
Restoration Designation Number
• Mini-Line BEGO Semados® Mini implant 4
Mini healing post (gingival former) 4
Mini Open tray impression 4
Wirobond® MI bar abutment M 4
Wirobond® MI round bar 40 mm 1
Round bar system PRECI-HORIX 1
Total
Bar restoration on 6 implants in the maxilla (Wirobond® MI; CoCr alloy)
Restoration Designation Number
• Mini-Line BEGO Semados® Mini implant 6
Mini healing post (gingival former) 6
Mini Open tray impression 6
Wirobond® MI bar abutment Mini 6
Wirobond® MI round bar 40 mm 2
Round bar system PRECI-HORIX 1
Total
BEGO Semados® Mini-Line · Hybrid prosthetics
Material costs for each indication
122
seRVice · maTeRial cosTs oVeRVieW
Easy-Con restorations on 2 implants
Restoration Designation Number
• Mini-Line BEGO Semados® Mini implant 2
Mini healing post (gingival former) 2
Mini Open tray impression 2
Easy-Con Mini 2
Easy-Con laboratory set 1
Total
BEGO Semados® Mini-Line · Hybrid prosthetics
Material costs for each indication
Composition of the prefabricated BEGO Semados® Mini sets
• BEGO Semados® implant (Mini): Implant and implant cover screw
• Impression Set (open): Impression post, implant analog and titanium screw
• Abutment Set: Abutment, prosthesis screw and technician screw
123
List of manufacturers' registered trademarks, see page 111
124
seRVice · ToRQUe specificaTions
Torques for BEGO Semados® S / RI / RS / RSX-Line · BEGO Semados® Mini-Line
Description Torque [Ncm]
Implant cover screw hand-tight / ≤ 10
Healing post hand-tight / 10
Individual healing post 15
Impression post hand-tight / 10
CAD positioner hand-tight
Temporary restorations • Sub-Tec provisional abutment (PEEK)• Sub-Tec immediate temporary abutment
15
Sub system• BeCe® Sub-Tec ceramic abutment • BeCe® Sub-TecPlus ceramic abutment • Sub-Tec CAD/CAM TiBase L • Sub-Tec CAD/CAM titanium adhesive abutment • Sub-Tec Easy-Con • Sub-Tec gold cast-on • Sub-Tec ball attachment • Sub-Tec ³Locator® • Sub-Tec magnetic abutment • Sub-Tec temporary titanium abutment • Sub-Tec titanium / Wirobond® MI bar abutment • Sub-Tec titanium abutment, conical • Sub-Tec Universal • Sub-TecPlus titanium / Wirobond® MI abutment
30
Sub-Tec MultiPlus abutments 30
MultiPlus system• MultiPlus gold cast-on• MultiPlus titanium abutment • MultiPlus Universal
20
Mini system• Easy-Con Mini• Gold cast-on Mini• Ball attachment Mini• Wirobond® MI Mini abutment, conical• Wirobond® MI bar abutment Mini
25
125
seRVice · ToRQUe specificaTions
General notes
To avoid damage to the components, always use original BEGO Implant System tools and products. In particular, the use of the torque ratchet is essential in order to maintain the prescribed pre-tensioning of the connecting screws (specified in Ncm).
• Ensure that the prosthesis screws have not been used or damaged previously in the laboratory.
• After final securing of the implant abutments, all connecting screws should be tightened again to the specified torque after approx. 5 to 10 minutes and checked.
• The implant-prosthetics interfaces must be regularly checked to ensure they are tight and that there are no gaps.
• Extreme loads exerted on the components could cause the connecting screw(s) to loosen. If so, it is essential to identify and rectify the cause of loosening.
• In the case of abutments secured to the implant with a separate prosthesis screw, we recommend using a new screw after the original screw has been undone, e.g., for cleaning the prosthetics / implant abutments.
All the information given has been determined to the best of our knowledge on the basis of years of practical application. It applies to restorations carried out in accordance with our own, and generally applicable, scientific findings.
General information on titanium
Titanium is a biopassive and bioinert material that is virtually tasteless, radiotransparent, resistant to corrosion and a poor conductor of heat (thermal conductivity coefficient 0.168 in comparison with 3.118 for gold).
Commercially pure titanium and titanium alloys are used for implantology, although pure titanium also contains impurities. We distinguish between 4 grades of commercially pure titanium, depending on the level of impurities. All 4 groups may only contain a maximum of 0.05% N, 0.08% C and 0.015% H. The presence of these substances is unavoidable as they occur during the extraction process or they are added intentionally to control the physical properties.
Commercially pure titanium (Grades 1–4) and titanium alloys (from Grade 5) can be used for all types of dental work. It is possible to veneer titanium crowns and bridges with special ceramic, which is fired at below 800°C because titanium undergoes a microstructural change at 882°C (volume change), with a specific CTE also being
necessary (titanium: CTE of approx. 9.6). During finishing and polishing, the poor thermal conductivity of titanium must be borne in mind, as localised heat build-up can occur during processing. Increased deposition of O2 then takes place at these points, so causing the material to become brittle.
Titanium smears when machined, so special drills have to be used. Freshly polished surfaces will only retain their mirror finish if they do not come into contact with H2O for at least 10 minutes.
During this period the surface oxidises to form a protective layer. When modelling frames, bear in mind that when titanium is cast, a strong, thick layer of oxide containing elements of the investment material is produced – the so-called α case layer. All traces of this layer need to be removed. Thicker wax-up margins are required here and are adjusted during finishing. Titanium and titanium alloys can only be joined by welding (laser, plasma, arc, resistance).
Titanium
Elements Grade 2 Grade 3 Grade 4 Grade 5
• Nitrogen, max. [%] 0.03 0.05 0.05 0.05
• Carbon, max. [%] 0.08 0.08 0.08 0.08
• Hydrogen, max. [%] 0.015 0.015 0.015 0.015
• Iron, max. [%] 0.30 0.30 0.50 0.40
• Oxygen, max. [%] 0.25 0.35 0.40 0.20
• Aluminium [%] 5.5–6.75
• Vanadium [%] 3.5–4.5
• Titanium [%] Rest Rest Rest Rest
126
seRVice · maTeRial specificaTions
General information on Wirobond® MI
BEGO Implant Systems is the only manufacturer to offer implant-prosthetic abutments made of a cobalt-chrome alloy (Wirobond® MI). This is just one example of how BEGO is continuing to consolidate its pioneering role in the field of non-precious alloys, enabling customers engaged in implantology to benefit from BEGO’s many years of experience in this field.
Wirobond® alloys have a long-standing reputation with laboratories for being a reliable material for use on patients.Improved material properties mean processing has become simpler; today, acceptance of the alloys, which offer a competitive alternative to other alloys, is excellent at both national and international level.
Compared with titanium abutments, Wirobond® MI (Medical Implantology) abutments are silvery metallic in appearance, thus conforming to patient expectations regarding improved aesthetics and high-quality workmanship. The alloy is subject to a unique processing method which “conditions” the material to meet the high demands of implant prosthetics.
Wirobond® MI has been optimised to suit laser-welding in particular – making it easier to laser than titanium.This is primarily due to the negligible carbon content (max. 0.02 %), which guarantees no build-up of carbide deposits. The result is a permanently secure welded seam, something which is especially important in the case of bar constructions.
The very fine microstructure of Wirobond® sets new standards. An exceptionally dense, high-gloss surface is achieved by polishing: a crucial prerequisite when seeking to prevent plaque deposits. Additional material properties include a high degree of heat resistance and low thermal conductivity. Wirobond® MI is highly corrosion-resistant, free of nickel and beryllium, has no cytotoxic potential and does not cause any skin irritation or allergic sensiti-sation. A bio-certificate is available on request.
Recent studies have also shown that when combined with titanium implants, Wirobond® MI abutments produce lower corrosion currents than titanium abutments or high-gold alloys.
Wirobond
BEGO Dental Casting
280CSGLFC
BEGO Implant SystemsImplantology
MI
C+BEGO MedicalCAD/CAM
BEGO Conventional Technology
127
seRVice · maTeRial specificaTions
Compositions
Material Article
• Grade 4 commercially pure titanium acc. to ASTM F67
BEGO Semados® implants S / RI / RS / RSX / Mini-Line
Drill sleeves 1.6 / 2.5 / 3.2
3Dolder® bar joint attachment 3.0 – titanium
Implant cover screws
Female part 2Dalbo®-Plus, female part
OsseoPlus Transfer screws
Parallel post S / RI / RS / RSX / Mini-Line
Denture magnet (Sm2 Co17, laser-welded in titanium, gas-tight)
Sub-Dent magnetic impression
Sub-Tec magnetic abutment (Sm2 Co17, laser-welded in titanium, gas-tight)
Sub-Tec titanium abutment, conical
Sub-Tec titanium bar abutment
• Grade 5 titanium (titanium alloy Ti-6Al-4V) in accordance with ASTM F136
Healing post S / RI / RS / RSX / Mini-Line
Assortment set Sub-TecPlus 0°/15°/20°
BEGO Guide master sleeves / spoons
BEGO Semados® provisional implant (PI)
Bone profiler – guide sleeve
Drill stops
Easy-Con impression coping – cap, analog, retention cap
Easy-Con Mini
Insertion tools for implants
Ball attachment Mini-Line
2Locator® laboratory set, retention cap
Model implants S / RI / RS / RSX / Mini-Line
MultiPlus healing caps, impressions, analog, protection analog, titanium abutment
Mini open tray impression, Mini impression post
PI bending instrument, PI analog, PI multifunction cap, PI paralleling post
Prosthesis screws / Technician screws
Secondary screw 1.2 mm
Sub-Dent closed / open tray impression, Sub impression post
Sub-Tec CAD/CAM TiBase L
Sub-Tec CAD/CAM titanium adhesive abutment Hex / no Hex
seRVice · maTeRial specificaTions
List of manufacturers' registered trademarks, see page 111
128
Compositions
Material Article
• Grade 5 titanium (titanium alloy Ti-6Al-4V) in accordance with ASTM F136
Sub-Tec Easy-Con abutment
Sub-Tec ball attachment
Sub-Tec ball attachment, spacer
Sub-Tec 2Locator® abutment (coated with titanium nitrate)
Sub-Tec MultiPlus abutment
Sub-Tec immediate temporary abutment
Sub-Tec Universal / no Hex, Universal base Hex / no Hex
Sub-TecPlus titanium abutment / titanium angulated abutment
• Wirobond® MI, CoCr alloy Co 63.8 – Cr 24.8 – W 5.3 – Mo 5.1 – Si < 1 – Fe < 1
3Dolder® bar joint attachment 3.0 – Wirobond® M
Sub-Tec Wirobond® MI bar abutment
Sub-TecPlus Wirobond® MI abutment / angulated abutment
Wirobond® MI Mini abutment, conical
Wirobond® MI bar abutment Mini / round bar 40 mm
• Stainless steel BEGO Guide drills / instruments, bone profiler, tissue punches, pilot drills, pilot markers, depth drills, countersinks, threadformers, screw tappers, shape drills, gap-cutter disc, Trepan drills, OsseoPlus Transfer instruments
Transmucosal insert analog
Temperature-resistant implant analog
PI removal tool / insertion tool / stabilizer
• Polyether-ether-ketone (PEEK) Individual healing post Ø 7
CAD positioner
PI protection cap
Sub-Tec provisional abutment Ø 5.5 / 7 – Sub-Tec provisional PEEK abutment
• Zirconium oxide BeCe® Sub-Tec ceramic abutments / BeCe® Sub-TecPlus ceramic abutments
• Silicone Denture magnet, position sleeve / 2Locator® block-out ring (white)
• Gold alloy 3Dolder® bar - female part, Gold
• 60Au – 19Pt – 20Pd – 1Ir Gold cast-on Mini, cast-on abutment Mini
Sub-Tec Gold cast-on / no Hex, Sub cast-on abutment / no Hex
• 69Au – 12Ag – 11Cu – 4Pd – 3Pt Female part 2Dalbo®-PLUS, retention insert 2Dalbo®-PLUS
seRVice · maTeRial specificaTions
129
Compositions
Material Article
• Polyoxymethylene (POM) Female part 2Dalbo®-PLUS, space holder
MultiPlus Universal, wax-up sleeve gold cast-on
Female part PRECI-CLIX, white, yellow, red
Sub-Dent closed tray impression, impression post cap
Sub-Tec Universal / no Hex, Sub-burnout acrylic sleeve Universal
• Brass 3Dolder® bar female part, resilience rail
• Ti-Al-V PRECI-CLIX housing
• Polycarbonate (PC) Sub-Tec gold cast-on / no Hex, Sub-burnout acrylic sleeve gold cast-on
• Polyethylene (PE) 2Locator® impression coping / parallel post
• Aluminium 2Locator® analog
• Nylon 2Locator® retention insert blue / pink / transparent / red / green
• Steel Initial drill
• Rubber PRECI-CLIX space holder
• 67Fe – 17Cr – 10Ni – 2Mn – 1.6Cu – 1Si – 1.4C – 1.4S
PRECI-CLIX attachment analog
Round bar system “PRECI-HORIX”, rider housing (coated with titanium nitrate)
• Resin PRECI-CLIX duplicating auxiliary
Round bar system “PRECI-HORIX”, insertion tool
Round bar system “PRECI-HORIX”, yellow female part
Round bar system “PRECI-HORIX”, space holder
• Polyether 2Locator® production insert (black)
• Polyamide (PA) Easy-Con impression coping – production insert
List of manufacturers' registered trademarks, see page 111
130
seRVice · maTeRial specificaTions
If you have any questions concerning alloys, materials or constituents, please contact:+49 (0)421 2028-0 or www.bego.com
Alloy and material recommendations
Product from BEGO Implant Systems Product from BEGO Dental Alloys (article no.) Product from BEGO Dental Laser Wire (article no.)
• Sub-TecPlus abutments
• Sub-Tec titanium abutment, conical
• Sub-Tec titanium bar abutment
• Sub-Tec Wirobond® MI bar abutment
• Wirobond® MI Mini abutment, conical
• Wirobond® MI bar abutment Mini
• Bio PontoStar® XL (61140)
• PontoLloyd® G (61106)
• BioPlatinLloyd® (61125)
• BegoPal® 300 (61105)
• BegoCer® G (61097)
• Begostar® (61080)
• ECO d´OR (61112)
• Wirobond® 280 (50134)
• Bio PontoStar® XL – wire (61167)
• PontoLloyd® G – wire (61166)
• Bio PlatinLloyd® – wire (61161)
• BegoPal® 300 – wire (61165)
• BegoCer® G – wire (61164)
• BegoCer® G – wire (61164)
• ECO d’OR – wire (61170)
• Wiroweld – wire (50003)
• Sub-Tec Universal
• Sub-Tec Universal no Hex
• MultiPlus Universal
• Bio PontoStar® XL (61140)
• PontoLloyd® G (61106)
• BioPlatinLloyd® (61125)
• BegoPal® 300 (61105)
• BegoCer® G (61097)
• Begostar® (61080)
• ECO d´OR (61112)
• Wirobond® 280 (50134)
• Bio PontoStar® XL – wire (61167)
• PontoLloyd® G – wire (61166)
• Bio PlatinLloyd® – wire (61161)
• BegoPal® 300 – wire (61165)
• BegoCer® G – wire (61164)
• BegoCer® G – wire (61164)
• ECO d’OR – wire (61170)
• Wiroweld – wire (50003)
• Sub-Tec gold cast-on
• Sub-Tec gold cast-on no Hex
• MultiPlus gold cast-on
• Mini gold cast-on
• Bio PontoStar® XL (61140)
• Bio PontoStar® (61104)
• Bio PontoStar® XL wire (61167)
seRVice · maTeRial specificaTions
131
indeX
A
• Assortment set Sub-TecPlus 0°/15°/20° (S/RI-Line) 73, 74
B
• Ball attachment impression set 2Dalbo®-PLUS 85, 104
• Ball attachment laboratory set Mini 86, 103
• Ball attachment Mini (Mini-Line) 103
• BeCe® Sub-Tec ceramic abutments (S/RI/RS/RSX-Line)
71
• BeCe® Sub-TecPlus ceramic abutments (S/RI/RS/RSX-Line)
71
• BEGO Collagen Fleece 8
• BEGO Collagen Membrane 8
• BEGO Guide connector 44
• BEGO Guide countersink 43
• BEGO Guide master sleeves 42
• BEGO Guide pilot drill 43
• BEGO Guide ratchet adapter for connector 44
• BEGO Guide screw tappers 44
• BEGO Guide S-Line Tray 42
• BEGO Guide spoons 42
• BEGO GuidE SySTEM 41–44
• BEGO Guide tissue punches 42
• BEGO Guide center drill 43
• BEGO Guide depth drill 2.5 43
• BEGO Guide depth drill S3.25 43
• BEGO Guide depth drill S3.75 43
• BEGO Guide depth drill S4.1 43
• BEGO Guide depth drill S4.5 43
• BEGO Guide depth stop ring connector 44
• BEGO OSS 8
• BEGO OSS S 8
• BEGO Semados® implants Mini-Line 34
• BEGO Semados® implants RI-Line 24
• BEGO Semados® implants RS-Line 28
• BEGO Semados® implants RSX-Line 29
• BEGO Semados® implants S-Line 20
• BEGO Semados® Mini Demo implants 111
• BEGO Semados® Mini implant large-scale model 110
• BEGO Semados® PI tray 38
• BEGO Semados® provisional implant 38
• BEGO Semados® ratchet adapter 39, 58, 62
• BEGO Semados® RI Demo implants 111
• BEGO Semados® RI-implant large-scale model 110
• BEGO Semados® RI-Line TrayPlus 49
• BEGO Semados® RS Demo implants 111
• BEGO Semados® RSX Demo implants 111
• BEGO Semados® RSX-implant large-scale model 110
• BEGO Semados® RS/RSX-Line TrayPlus 52
• BEGO Semados® S Demo implants 111
• BEGO Semados® S-implant large-scale model 110
• BEGO Semados® S-Line TrayPlus 46
• BiOMATEriAL SySTEM 7–11
• Bone profiler (S/ri/rS/rSX-Line) 56
• BOnE ShApErS / TrEpAnS 56
C
• CAd/CAM prOSThETiCS Mini-LinE 98–100
• CAd/CAM prOSThETiCS S/ri/rS/rSX-LinE 66–68
• CAd/CAM prOSThETiCS S/ri/rS/rSX-LinE MULTIPLUS SySTEM
80–81
• CAd positioner Mini (Mini-Line) 100
• CAd positioner MultiPlus (MultiPlus system) 81
• Cleaning reamer for internal drill cooling 58
• Countersink ri-Line 50
• Countersink rS/rSX-Line 53
• Countersink S-Line 47
• Cover screws (Mini-Line) 35
• Cover screws (rS/rSX-Line) 30
• Cover screws (S/ri-Line) 21, 25
• CROWNS AND BRIDGES (S/RI/RS/RSX-LINE) 70–77
• CROWNS (MINI-LINE) 102
D
• 2Dalbo®-PLUS activator/deactivator 85, 104
• dEMO MOdELS / MATEriALS 109–111
• denture magnet 87
• depth drills 2.5, short/long (S-Line) 46
• depth drill Mini-Line 55
• depth drills ri-Line 2.5, short/long 49
• depth drills ri-Line 3.2, short/long 49
• depth drill ri-Line, long 50
• depth drill ri-Line, short 50
• depth drill rS/rSX-Line 2.5, short/long 52
• depth drill rS/rSX-Line, long 53
• depth drill rS/rSX-Line, short 53
• depth drills S-Line, long 47
• depth drills S-Line, short 47
• depth gauges S/ri/rS/rSX-Line 58
• 2Dolder® bar - female part, Gold 89, 105
• 2Dolder® bar - female part, Palladium 89, 105
• 2Dolder® bar joint attachment 3.0 – titanium 88
• 2Dolder® bar joint attachment 3.0 – Wirobond® MI 88, 105
• drills for single use Basic kit (S-Line) 48
• drill for single use depth drill (S-Line) 48
• drill extension, one-piece short/long (without internal cooling)
57
List of manufacturers' registered trademarks, see page 111
132
indeX
• drill extension (with internal cooling) 57
• drill module ri 5.5 49
• drill module rS/rSX 5.5 52
• drill module S 5.5 46
• drill sleeves 18
• DRILLS 45–55
• driLLS (Mini-LinE) 55
• DRILLS (RI-LINE) 49-51
• DRILLS (RS/RSX-LINE) 52-54
• driLLS (S-LinE) 46–48
• drill stops (S/ri-Line) 48, 51
• drill stops ri-Line 51
• drill stops (rS/rSX-Line) 54
• drill stop TrayPlus (S/RI-Line) 48, 51
• drill stop TrayPlus RI-Line 51
• drill stop TrayPlus RS/RSX-Line 54
E
• Easy-Con analog 90, 106
• Easy-Con impression coping 90, 106
• Easy-Con instrument 91, 107
• Easy-Con laboratory set 91, 107
• Easy-Con Mini abutment (Mini-Line) 106
• Easy-Con production insert (black) 91, 107
• Easy-Con retention insert (blue) 91, 107
• Easy-Con retention insert (green) 91, 107
• Easy-Con retention insert (pink) 91, 107
• Easy-Con retention insert (red) 91, 107
• Easy-Con retention insert (transparent) 91, 107
F
• Female part 2Dalbo®-PLUS 85, 104
• Finger wheel 58, 62
G
• Gap cutter burr (Mini-Line) 55
• Gap cutter disc (Mini-Line) 55
• Glass-fibre pin 58
• Gold cast-on Mini (Mini-Line) 102
• Grip-TecPlus 63
• Guiding wrench 57
H
• healing post (S/ri/rS/rSX-Line) 22, 25, 31
• healing post, conical (S/ri/rS/rSX-Line) 22, 26, 31
• healing post, individual Ø 7 (S/ri/rS/rSX-Line) 22, 26, 31
• healing post Mini 35
• healing post rS/rSX implants 3.0 30
• hexagon screwdriver 1.25 mm for contra-angle, short/long
62
• hexagon screwdriver 1.25 mm XS/short/long with ratchet connection
62
• holder BeCe® Sub-TecPlus 71
• hyBrid prOSThETiCS (Mini-LinE) 103–107
• hyBrid prOSThETiCS (S/ri/rS/rSX-LinE) 84–93
I
• implant analog Mini (Mini-Line) 101
• implant analogs S/ri/rS/rSX-Line 69
• implant analog, temperature-resistant (S/RI/RS/RSX-Line)
69
• implant cover screw (Mini-Line) 35
• implant cover screw (rS/rSX-Line) 30
• implant cover screws S/ri-Line 21, 25
• IMPLANT PLANNING ACCESSORIES 17, 18
• iMprESSiOn TAkinG And MOdEL MAkinG (MINI-LINE)
101
• IMPRESSION TAKING AND MODEL MAKING (S/RI/RS/RSX-LINE)
69
• initial drill (Mini-Line) 55
• insertion tool for ball attachment 84, 103
• insertion tool for magnetic abutment 87
• insertion tools for implants short / long with contra-angle connection
57
• insertion tools for implants, XS / short / long with ratchet connection
57
• insertion tool ³Locator® 90, 92, 106
• insertion tool prECi-CLiX 86, 103
• insertion tool W&h for implants with W&h contra-angle connection
57
L
• Large-scale models – demonstration suitcase 110
• 3Locator® analog 92
• 3Locator® angle measurement gauge 92
• 3Locator® impression coping 92
• 3Locator® instrument (3-piece) 93
• 3Locator® production insert (black) 93
• 3Locator® laboratory set 93
• 3Locator® parallel post 92
• 3Locator® retention insert (blue) 93
• 3Locator® retention insert (green) 93
• 3Locator® retention insert (pink) 93
• 3Locator® retention insert (red) 93
• 3Locator® retention insert (transparent) 93
M
• Measuring balls 18
• Mini-LinE iMpLAnTS / hEALinG pOSTS 33–35
133
indeX
• Mini open tray impression (Mini-Line) 101
• Mini- / OsseoPlus tray 55
• MultiPlus adjustment supporters (MultiPlus system) 78
• MultiPlus analogs (MultiPlus system) 82
• MultiPlus bone shaper (S-Line) 78
• MultiPlus closed tray impression short / long (MultiPlus system)
82
• MultiPlus gold cast-on (MultiPlus system) 83
• MultiPlus healing cap (MultiPlus system) 79
• MultiPlus healing cap Mushroom (MultiPlus system) 79
• MultiPlus insertion rail (MultiPlus system) 78
• MultiPlus open tray impression (MultiPlus system) 82
• MultiPlus protection analog (MultiPlus system) 82
• MuLTiPLUS SySTEM (S/ri/rS/rSX-LinE) 78–83
• MultiPlus titanium abutment (MultiPlus system) 83
• MultiPlus Universal (MultiPlus system) 83
O
• OSSEOPLUS TRANSFER 10–11
• OsseoPlus Transfer ablative H (contra-angle) 11
• OsseoPlus Transfer ablative H (handpiece) 11
• OsseoPlus Transfer ablative V Ø 7.5 11
• OsseoPlus Transfer bone facer Ø 3.2 11
• OsseoPlus Transfer center punch Ø 7.5 11
• OsseoPlus Transfer disc Ø 10 L 11
• OsseoPlus Transfer disc Ø 10 XL 11
• OsseoPlus Transfer drill Ø 1.2 L 11
• OsseoPlus Transfer drill Ø 1.6 XL 11
• OsseoPlus Transfer hand screwdriver 11
• OsseoPlus Transfer insertion L 11
• OsseoPlus Transfer insertion XL 11
• OsseoPlus Transfer screws Ø 1.5 10
• OsseoPlus Transfer tray 10
• OsseoPlus Transfer trepan (contra-angle) 11
• OsseoPlus Transfer trepan (handpiece) 11
• Osteosynthesis screws 10
P
• paralleling post rS/rSX-Line 58
• paralleling posts Mini 58
• paralleling posts ri-Line 57
• paralleling posts S-Line 57
• pi bending tool 39
• pi depth drill 39
• pi implant analogs 38
• pi insertion tool 39
• pi multifunctional cap 38
• pi paralleling post 39
• pi protection cap 38
• pi ratchet 39
• pi removal tool 39
• pi stabilizer 39
• pilot drill, short / long (S-Line) 46
• pilot marker ri-Line 2.5, short / long 49
• pilot marker rS/rSX-Line 1.6, short / long 52
• pilot marker, short / long (S-Line) 46
• prECi-CLiX attachment analog 86, 103
• prECi-CLiX female part, red 86, 103
• prECi-CLiX female part, white 86, 103
• prECi-CLiX female part, yellow 86, 103
• PROSTHODONTICS 61–108
• prOSThOdOnTiCS (Mini-LinE) 97–108
• prOSThOdOnTiCS (S/ri/rS/rSX-LinE) 65–96
• prosthesis screw for ceramic abutment (S/RI/RS/RSX-Line)
95
• prosthesis screw hex 1.25 mm (S/RI/RS/RSX-Line)
95
• prosthesis screw Mini, conical (Mini-Line) 108
• prosthesis screw Mini (Mini-Line) 108
• prosthesis screw MultiPlus (M1.8) (S/RI/RS/RSX-Line)
95
• prosthesis screw rS/rSX 3.0 – for pEEk (RS/RSX-Line)
95
• prosthesis screw rS/rSX 3.0 (rS/rSX-Line) 95
• prosthesis screw Sub-TecPlus (M1.8) (S/RI/RS/RSX-Line)
95
• prosthesis screws Sub-Tec universal (M1.8) (S/RI/RS/RSX-Line)
95
• prosthetic kit 62
• prOSThETiC TOOLS 62, 63
• prOviSiOnAL iMpLAnT SySTEM 37–39
R
• radiographic templates 18
• ratchet / torque spanner 10–50 ncm 58, 62
• reamer, external for MultiPlus (MultiPlus system) 83
• reamer, external for Sub-Tec universal (M1.8) (S/RI/RS/RSX-Line)
77
• reamer, internal for Gold cast-on Mini (Mini-Line) 102
• reamer, internal for MultiPlus (MultiPlus system) 83
• Reamer, internal for Sub-Tec gold cast-on abutment (S/RI/RS/RSX-Line)
77
• REGENERATION 7–11
• retention insert 2Dalbo®-PLUS 85, 104
• ri-LinE iMpLAnTS / hEALinG pOSTS 23-26
• round bar system "prECi-hOriX" 89, 105
• rS / rSX-LinE iMpLAnTS / hEALinG pOSTS 27–31
List of manufacturers' registered trademarks, see page 111
134
indeX
S
• Screwdriver for secondary connection 96
• SCrEWS (Mini-LinE) 108
• SCrEWS (S/ri/rS/rSX-LinE) 94–96
• Screw tapper ri-Line 51
• Screw tapper rS/rSX-Line 53
• Screw tapper S-Line 47
• SECOndAry COnnECTiOn 96
• Secondary screw 1.2 mm 96
• Secondary screw MultiPlus (M1.4) (MultiPlus system) 95
• Shape drill Mini-Line 55
• S-LinE iMpLAnTS / hEALinG pOSTS 19–22
• Slot screwdriver, short / long with ratchet connection 62
• Spare brush for glass-fibre pin 58
• Sub-dent magnetic impression 87
• Sub-dent open tray impression (S/ri/rS/rSX-Line) 69
• Sub-Tec ball attachment (S/ri/rS/rSX-Line) 84
• Sub-Tec ball attachment 2Dalbo®-PLUS (S/RI/RS/RSX-LINE)
84
• Sub-Tec CAd positioner (S/ri/rS/rSX-Line) 68
• Sub-Tec CAd/CAM TiBase L (S/ri/rS/rSX-Line) 68
• Sub-Tec CAd/CAM titanium adhesive abutment (S/RI/RS/RSX-Line)
68
• Sub-Tec CAd/CAM titanium adhesive abutment no Hex (S/RI/RS/RSX-Line)
68
• Sub-Tec Easy-Con abutment (S/ri/rS/rSX-Line) 90
• Sub-Tec gold cast-on (S/ri/rS/rSX-Line) 77
• Sub-Tec gold cast-on no hex (S/ri/rS/rSX-Line) 77
• Sub-Tec immediate temporary abutment (S/RI/RS/RSX-Line)
71
• Sub-Tec ³Locator® abutment (S/RI/RS/RSX-Line) 92
• Sub-Tec magnetic abutment (S/ri/rS/rSX-Line) 87
• Sub-Tec MultiPlus abutment 0° (S/RI/RS/RSX-Line) 78
• Sub-Tec MultiPlus abutment 20° (S/RI/RS/RSX-Line) 79
• Sub-Tec MultiPlus abutment 30° (S/RI/RS/RSX-Line) 79
• Sub-Tec provisional abutment Ø 5.5 (S/RI/RS/RSX-Line)
70
• Sub-Tec provisional abutment Ø 7 (S/RI/RS/RSX-Line)
70
• Sub-Tec provisional pEEk abutment (S/RI/RS/RSX-Line)
70
• Sub-Tec temporary titanium abutment (S/RI/RS/RSX-Line)
70
• Sub-Tec temporary titanium abutment no Hex (S/RI/RS/RSX-Line)
70
• Sub-Tec titanium abutment, conical (S/RI/RS/RSX-Line)
76
• Sub-TecPlus titanium abutment, straight (S/RI/RS/RSX-Line)
75
• Sub-Tec titanium bar abutment (S/RI/RS/RSX-Line)
88
• Sub-Tec universal abutment (S/ri/rS/rSX-Line) 76
• Sub-Tec universal abutment no hex (S/RI/RS/RSX-Line)
76
• Sub-Tec Wirobond® MI bar abutment (S/RI/RS/RSX-Line)
88
• Sub-TecPlus 15° titanium angulated abutment (S/RI/RS/RSX-Line)
74
• Sub-TecPlus 15° Wirobond® MI angulated abutment (S/RI/RS/RSX-Line)
72
• Sub-TecPlus 20° titanium angulated abutment (S/RI/RS/RSX-Line)
75
• Sub-TecPlus 20° Wirobond® MI angulated abutment (S/RI/RS/RSX-Line)
72
• Sub-TecPlus Wirobond® MI abutment, straight (S/RI/RS/RSX-Line)
73
• SurGEry 13–59
• SurGiCAL ACCESSOriES 59
• Surgical drape-kit 59
• SurGiCAL TOOLS 57, 58
T
• Technician screw for MultiPlus (M1.4) (MultiPlus system) 94
• Technician screw for Sub-TecPlus (M1.8) (S/RI/RS/RSX-Line)
94
• Technician screw L9 (S/ri/rS/rSX-Line) 94
• Technician screw Mini, conical (Mini-Line) 108
• Technician screw Mini (Mini-Line) 108
• Technician screw rS/rSX 3.0 (rS/rSX-Line) 94
• Technician screws for Sub-Tec universal abutment (S/RI/RS/RSX-Line)
94
• Technician's screwdriver 63
• GuidEd SurGEry (BEGO GuidE SySTEM) 41-44
• Threadformer Mini-Line 55
• Threadformer ri-Line 50
• Tissue punches S/ri/rS/rSX-Line 46, 49, 52
• Training jaw (lower) 111
• Trepan drill 56
U
• upper jaw demonstration model S/ri-Line 111
W
• Wirobond® MI Mini abutment, conical (Mini-Line) 102
• Wirobond® MI round bar 40 mm 88, 105
• Wirobond® MI bar abutment Mini (Mini-Line) 105
• Wrapping drape for sterile container 59
135
Customer Number
RE
F 8
24
72
/13
· W
F · ©
20
14
by
BE
GO
· 2
01
4-0
1
BEGO Implant Systems GmbH & Co. KG Wilhelm-Herbst-Str. 1 · 28359 Bremen, GermanyTel. +49 421 2028-246 · Fax +49 421 2028-265 E-mail [email protected] · www.bego-implantology.com
www.bego-implantology.com