imprints, their classification, method of receipt. classification of materials of imprint. clinical,...
TRANSCRIPT
![Page 1: Imprints, their classification, method of receipt. Classification of materials of imprint. Clinical, physical and chemical descriptions of materials for](https://reader036.vdocuments.net/reader036/viewer/2022062407/56649cf05503460f949bf281/html5/thumbnails/1.jpg)
Imprints, their classification, method of receipt. Classification of materials of
imprint. Clinical, physical and chemical descriptions of materials for imprint
![Page 2: Imprints, their classification, method of receipt. Classification of materials of imprint. Clinical, physical and chemical descriptions of materials for](https://reader036.vdocuments.net/reader036/viewer/2022062407/56649cf05503460f949bf281/html5/thumbnails/2.jpg)
• Impression is a negative (reverse) reflection of any organ of the dentomaxillar system: teeth, alveolar sprout or part, palate, nose,
• ear and others like that.
• Impression is a negative (reverse) reflection of hard and soft tissues, placed in the area of dental prosthesis and it’s borders which
• Is being taken by means of the special impression materials
![Page 3: Imprints, their classification, method of receipt. Classification of materials of imprint. Clinical, physical and chemical descriptions of materials for](https://reader036.vdocuments.net/reader036/viewer/2022062407/56649cf05503460f949bf281/html5/thumbnails/3.jpg)
Types of impressions:•Previous•Final
![Page 4: Imprints, their classification, method of receipt. Classification of materials of imprint. Clinical, physical and chemical descriptions of materials for](https://reader036.vdocuments.net/reader036/viewer/2022062407/56649cf05503460f949bf281/html5/thumbnails/4.jpg)
Final impressions:•Anatomical•Functional
![Page 5: Imprints, their classification, method of receipt. Classification of materials of imprint. Clinical, physical and chemical descriptions of materials for](https://reader036.vdocuments.net/reader036/viewer/2022062407/56649cf05503460f949bf281/html5/thumbnails/5.jpg)
Types ofTypes of impressionsimpressions
• Single layer
• Double layer
• Combined
![Page 6: Imprints, their classification, method of receipt. Classification of materials of imprint. Clinical, physical and chemical descriptions of materials for](https://reader036.vdocuments.net/reader036/viewer/2022062407/56649cf05503460f949bf281/html5/thumbnails/6.jpg)
Types ofTypes of impressionsimpressions• Anatomical
(orientation)– take with standard or individual tray in the state of calmness of tissues of prosthetic bed and tissues, which are placed on a border with them.
• Functional - take with individual tray by means of the special functional tests, in the case of making of removable constructions of dentures :
compression - in the case of pressing of buffer areas of prosthetic bed, by masticatory pressure or by the hand of doctor;
decompression - in the case of minimum pressure on the tissues of prosthetic bed
![Page 7: Imprints, their classification, method of receipt. Classification of materials of imprint. Clinical, physical and chemical descriptions of materials for](https://reader036.vdocuments.net/reader036/viewer/2022062407/56649cf05503460f949bf281/html5/thumbnails/7.jpg)
• Double layer – an exact reflection of gingival edge is taken by means of impression materials of the same group (previous layer + correction layer)
• Combined– is taken by means of impression materials of different groups (previous layer + correction layer)
• Occlusal–for taking impression in position of central occlusion
![Page 8: Imprints, their classification, method of receipt. Classification of materials of imprint. Clinical, physical and chemical descriptions of materials for](https://reader036.vdocuments.net/reader036/viewer/2022062407/56649cf05503460f949bf281/html5/thumbnails/8.jpg)
Impression traysImpression trays
• Standard: made factory- On maxillae different sizes- On mandible different sizes• Individual: made in dental
laboratory• By material:- plastic- metallic- waxen• Presence of retentin
points- perforated- unperforated
![Page 9: Imprints, their classification, method of receipt. Classification of materials of imprint. Clinical, physical and chemical descriptions of materials for](https://reader036.vdocuments.net/reader036/viewer/2022062407/56649cf05503460f949bf281/html5/thumbnails/9.jpg)
Impression trays for taking impression at the same time
![Page 10: Imprints, their classification, method of receipt. Classification of materials of imprint. Clinical, physical and chemical descriptions of materials for](https://reader036.vdocuments.net/reader036/viewer/2022062407/56649cf05503460f949bf281/html5/thumbnails/10.jpg)
Placing of impression tray in oral cavity
![Page 11: Imprints, their classification, method of receipt. Classification of materials of imprint. Clinical, physical and chemical descriptions of materials for](https://reader036.vdocuments.net/reader036/viewer/2022062407/56649cf05503460f949bf281/html5/thumbnails/11.jpg)
Impression of maxillae
![Page 12: Imprints, their classification, method of receipt. Classification of materials of imprint. Clinical, physical and chemical descriptions of materials for](https://reader036.vdocuments.net/reader036/viewer/2022062407/56649cf05503460f949bf281/html5/thumbnails/12.jpg)
Double layer impression
![Page 13: Imprints, their classification, method of receipt. Classification of materials of imprint. Clinical, physical and chemical descriptions of materials for](https://reader036.vdocuments.net/reader036/viewer/2022062407/56649cf05503460f949bf281/html5/thumbnails/13.jpg)
Impression Materials• Non-elastic• Elastic
– Aqueous hydrocolloids• Agar• Alginate
– Non-aqueous elastomers• Polysulfide• Silicones
– Condensation– Addition
• Polyether
![Page 14: Imprints, their classification, method of receipt. Classification of materials of imprint. Clinical, physical and chemical descriptions of materials for](https://reader036.vdocuments.net/reader036/viewer/2022062407/56649cf05503460f949bf281/html5/thumbnails/14.jpg)
Indications
• Diagnostic casts– preliminary– opposing
• Indirect reconstruction– fixed– removable
• Bite registration
![Page 15: Imprints, their classification, method of receipt. Classification of materials of imprint. Clinical, physical and chemical descriptions of materials for](https://reader036.vdocuments.net/reader036/viewer/2022062407/56649cf05503460f949bf281/html5/thumbnails/15.jpg)
Elastomeric Impression Materials
• Viscoelastic– physical properties vary
• rate of loading
• Rapidly remove– decreases permanent
deformation• chains recoil from a recoverable distance
– increases tear strength
![Page 16: Imprints, their classification, method of receipt. Classification of materials of imprint. Clinical, physical and chemical descriptions of materials for](https://reader036.vdocuments.net/reader036/viewer/2022062407/56649cf05503460f949bf281/html5/thumbnails/16.jpg)
Impr
essi
on
Mat
eria
ls
Non-elastic
Elastic
Aqueous Hydrocolloids
Non-aqueous Elastomers
Polysulfide
Silicones
Polyether
Condensation
Addition
Agar (reversible)
Alginate (irreversible)
Plaster
Compound
ZnO - Eugenol
Waxes
![Page 17: Imprints, their classification, method of receipt. Classification of materials of imprint. Clinical, physical and chemical descriptions of materials for](https://reader036.vdocuments.net/reader036/viewer/2022062407/56649cf05503460f949bf281/html5/thumbnails/17.jpg)
Aqueous Hydrocolloids• Colloidal suspensions
– chains align to form fibrils– traps water in interstices
• Two forms– sol
• viscous liquid
– gel• elastic solid
• Placed intra-orally as sol– converts to gel
• thermal or chemical process
![Page 18: Imprints, their classification, method of receipt. Classification of materials of imprint. Clinical, physical and chemical descriptions of materials for](https://reader036.vdocuments.net/reader036/viewer/2022062407/56649cf05503460f949bf281/html5/thumbnails/18.jpg)
Aqueous Hydrocolloids
• Semi-permeable membranes– poor dimensional stability
• Evaporation• Syneresis
– fibril cross linking continues• contracts with time• exudes water
• Imbibition– water absorption
• swells
![Page 19: Imprints, their classification, method of receipt. Classification of materials of imprint. Clinical, physical and chemical descriptions of materials for](https://reader036.vdocuments.net/reader036/viewer/2022062407/56649cf05503460f949bf281/html5/thumbnails/19.jpg)
Elastic
Aqueous Hydrocolloids
Non-aqueous Elastomers
Polysulfide
Silicones
Polyether
Condensation
Addition
Agar (reversible)
Alginate (irreversible)
![Page 20: Imprints, their classification, method of receipt. Classification of materials of imprint. Clinical, physical and chemical descriptions of materials for](https://reader036.vdocuments.net/reader036/viewer/2022062407/56649cf05503460f949bf281/html5/thumbnails/20.jpg)
Reversible Hydrocolloid (Agar)
• Indications– crown and bridge
• high accuracy
• Example– Slate Hydrocolloid (Van R)
![Page 21: Imprints, their classification, method of receipt. Classification of materials of imprint. Clinical, physical and chemical descriptions of materials for](https://reader036.vdocuments.net/reader036/viewer/2022062407/56649cf05503460f949bf281/html5/thumbnails/21.jpg)
Composition• Agar
– complex polysaccharide• seaweed
– gelling agent
• Borax– strength
• Potassium sulfate– improves gypsum
surface
• Water (85%)
agar hydrocolloid (hot) agar hydrocolloid (cold)
(sol) (gel)
cool to 43ºC
heat to 100ºC
![Page 22: Imprints, their classification, method of receipt. Classification of materials of imprint. Clinical, physical and chemical descriptions of materials for](https://reader036.vdocuments.net/reader036/viewer/2022062407/56649cf05503460f949bf281/html5/thumbnails/22.jpg)
Manipulation
• Gel in tubes– syringe and tray material
![Page 23: Imprints, their classification, method of receipt. Classification of materials of imprint. Clinical, physical and chemical descriptions of materials for](https://reader036.vdocuments.net/reader036/viewer/2022062407/56649cf05503460f949bf281/html5/thumbnails/23.jpg)
Manipulation• 3-chamber conditioning unit
– (1) liquefy at 100C for 10 minutes
• converts gel to sol
– (2) store at 65C– place in tray– (3) temper at 46C for 3 minutes– seat tray– cool with water at 13C for 3 minutes
• converts sol to gel
![Page 24: Imprints, their classification, method of receipt. Classification of materials of imprint. Clinical, physical and chemical descriptions of materials for](https://reader036.vdocuments.net/reader036/viewer/2022062407/56649cf05503460f949bf281/html5/thumbnails/24.jpg)
Advantages
• Dimensionally accurate• Hydrophilic
– displaces moisture, blood, fluids
• Inexpensive– after initial equipment
• No custom tray or adhesives• Pleasant flavor• No mixing required
![Page 25: Imprints, their classification, method of receipt. Classification of materials of imprint. Clinical, physical and chemical descriptions of materials for](https://reader036.vdocuments.net/reader036/viewer/2022062407/56649cf05503460f949bf281/html5/thumbnails/25.jpg)
Disadvantages
• Initial expense– special equipment
• Material must be prepared in advanced• Tears easily• Dimensionally unstable
– Must be poured immediately– Can only be used for a single cast
• Difficult to disinfect
![Page 26: Imprints, their classification, method of receipt. Classification of materials of imprint. Clinical, physical and chemical descriptions of materials for](https://reader036.vdocuments.net/reader036/viewer/2022062407/56649cf05503460f949bf281/html5/thumbnails/26.jpg)
Elastic
Aqueous Hydrocolloids
Non-aqueous Elastomers
Polysulfide
Silicones
Polyether
Condensation
Addition
Agar (reversible)
Alginate (irreversible)
![Page 27: Imprints, their classification, method of receipt. Classification of materials of imprint. Clinical, physical and chemical descriptions of materials for](https://reader036.vdocuments.net/reader036/viewer/2022062407/56649cf05503460f949bf281/html5/thumbnails/27.jpg)
Irreversible Hydrocolloid (Alginate)
• Most widely used impression material
• Indications– study models– removable fixed partial dentures
• framework
• Examples– Jeltrate (Dentsply/Caulk)– Coe Alginate (GC America)
![Page 28: Imprints, their classification, method of receipt. Classification of materials of imprint. Clinical, physical and chemical descriptions of materials for](https://reader036.vdocuments.net/reader036/viewer/2022062407/56649cf05503460f949bf281/html5/thumbnails/28.jpg)
Composition• Sodium alginate
– salt of alginic acid• mucous extraction of
seaweed (algae)
• Calcium sulfate– reactor
• Sodium phosphate– retarder
• Filler• Potassium fluoride
– improves gypsum surface
2 Na3PO4 + 3 CaSO4 Ca3(PO4)2 + 3 Na2SO4
Na alginate + CaSO4 Ca alginate + Na2SO4
(powder) (gel)
H2O
![Page 29: Imprints, their classification, method of receipt. Classification of materials of imprint. Clinical, physical and chemical descriptions of materials for](https://reader036.vdocuments.net/reader036/viewer/2022062407/56649cf05503460f949bf281/html5/thumbnails/29.jpg)
Manipulation
• Weigh powder• Powder added to water
– rubber bowl– vacuum mixer
• Mixed for 45 sec to 1 min• Place tray• Remove 2 to 3 minutes
– after gelation (loss of tackiness)
![Page 30: Imprints, their classification, method of receipt. Classification of materials of imprint. Clinical, physical and chemical descriptions of materials for](https://reader036.vdocuments.net/reader036/viewer/2022062407/56649cf05503460f949bf281/html5/thumbnails/30.jpg)
Advantages
• Inexpensive
• Easy to use
• Hydrophilic– displace moisture, blood, fluids
• Stock trays
![Page 31: Imprints, their classification, method of receipt. Classification of materials of imprint. Clinical, physical and chemical descriptions of materials for](https://reader036.vdocuments.net/reader036/viewer/2022062407/56649cf05503460f949bf281/html5/thumbnails/31.jpg)
Disadvantages
• Tears easily• Dimensionally unstable
– immediate pour – single cast
• Lower detail reproduction– unacceptable for fixed pros
• High permanent deformation• Difficult to disinfect
![Page 32: Imprints, their classification, method of receipt. Classification of materials of imprint. Clinical, physical and chemical descriptions of materials for](https://reader036.vdocuments.net/reader036/viewer/2022062407/56649cf05503460f949bf281/html5/thumbnails/32.jpg)
Non-Aqueous Elastomers
• Synthetic rubbers– mimic natural rubber
• scarce during World War II
• Large polymers– some chain lengthening– primarily cross-linking
• Viscosity classes– low, medium, high, putty– monophasic
![Page 33: Imprints, their classification, method of receipt. Classification of materials of imprint. Clinical, physical and chemical descriptions of materials for](https://reader036.vdocuments.net/reader036/viewer/2022062407/56649cf05503460f949bf281/html5/thumbnails/33.jpg)
Elastic
Aqueous Hydrocolloids
Non-aqueous Elastomers
Polysulfide
Silicones
Polyether
Condensation
Addition
Agar (reversible)
Alginate (irreversible)
![Page 34: Imprints, their classification, method of receipt. Classification of materials of imprint. Clinical, physical and chemical descriptions of materials for](https://reader036.vdocuments.net/reader036/viewer/2022062407/56649cf05503460f949bf281/html5/thumbnails/34.jpg)
Polysulfide
• First dental elastomers• Indications
– complete denture– removable fixed partial denture
• tissue
– crown and bridge
• Examples– Permlastic (Kerr)– Omni-Flex (GC America)
![Page 35: Imprints, their classification, method of receipt. Classification of materials of imprint. Clinical, physical and chemical descriptions of materials for](https://reader036.vdocuments.net/reader036/viewer/2022062407/56649cf05503460f949bf281/html5/thumbnails/35.jpg)
Composition• Base
– polysulfide polymers– fillers– plasticizers
• Catalyst– lead dioxide (or copper)– fillers
• By-product– water
![Page 36: Imprints, their classification, method of receipt. Classification of materials of imprint. Clinical, physical and chemical descriptions of materials for](https://reader036.vdocuments.net/reader036/viewer/2022062407/56649cf05503460f949bf281/html5/thumbnails/36.jpg)
--SH HS---------------------SH HS--
S H
O
=
Pb
=
O
O
=
Pb
=
OO = Pb = O
HS
-S-S---------------S-S-
S
S
+ 3PbO + H2O
mercaptan + lead dioxide polysulfide rubber + lead oxide + water
Polysulfide Reaction
![Page 37: Imprints, their classification, method of receipt. Classification of materials of imprint. Clinical, physical and chemical descriptions of materials for](https://reader036.vdocuments.net/reader036/viewer/2022062407/56649cf05503460f949bf281/html5/thumbnails/37.jpg)
Manipulation
• Adhesive to tray• Uniform layer
– custom tray
• Equal lengths of pastes• Mix thoroughly
– within one minute
• Setting time 8 – 12 minutes• Pour within 1 hour
![Page 38: Imprints, their classification, method of receipt. Classification of materials of imprint. Clinical, physical and chemical descriptions of materials for](https://reader036.vdocuments.net/reader036/viewer/2022062407/56649cf05503460f949bf281/html5/thumbnails/38.jpg)
Advantages
• Lower cost– compared to silicones and polyethers
• Long working time
• High tear strength
• High flexibility
• Good detail reproduction
![Page 39: Imprints, their classification, method of receipt. Classification of materials of imprint. Clinical, physical and chemical descriptions of materials for](https://reader036.vdocuments.net/reader036/viewer/2022062407/56649cf05503460f949bf281/html5/thumbnails/39.jpg)
Disadvantages• Poor dimensional stability
– water by-product– pour within one hour– single pour
• Custom trays• Messy
– paste-paste mix– bad odor– may stain clothing
• Long setting time
![Page 40: Imprints, their classification, method of receipt. Classification of materials of imprint. Clinical, physical and chemical descriptions of materials for](https://reader036.vdocuments.net/reader036/viewer/2022062407/56649cf05503460f949bf281/html5/thumbnails/40.jpg)
Elastic
Aqueous Hydrocolloids
Non-aqueous Elastomers
Polysulfide
Silicones
Polyether
Condensation
Addition
Agar (reversible)
Alginate (irreversible)
![Page 41: Imprints, their classification, method of receipt. Classification of materials of imprint. Clinical, physical and chemical descriptions of materials for](https://reader036.vdocuments.net/reader036/viewer/2022062407/56649cf05503460f949bf281/html5/thumbnails/41.jpg)
Condensation Silicone
• Indications– complete dentures– crown and bridge
• Examples– Speedex (Coltene/Whaledent)– Primasil (TISS Dental)
![Page 42: Imprints, their classification, method of receipt. Classification of materials of imprint. Clinical, physical and chemical descriptions of materials for](https://reader036.vdocuments.net/reader036/viewer/2022062407/56649cf05503460f949bf281/html5/thumbnails/42.jpg)
Composition
• Base– poly(dimethylsiloxane)– tetraethylorthosilicate– filler
• Catalyst– metal organic ester
• By-product– ethyl alcohol
Phillip’s 1996
![Page 43: Imprints, their classification, method of receipt. Classification of materials of imprint. Clinical, physical and chemical descriptions of materials for](https://reader036.vdocuments.net/reader036/viewer/2022062407/56649cf05503460f949bf281/html5/thumbnails/43.jpg)
HO – Si – O – Si - O - H
CH3
CH3 CH3
CH3 n
HO – Si – O – Si - O - H
CH3
CH3 CH3
CH3 n
C2H5O OC2H5
Si
C2H5O OC2H5
HO – Si – O – Si - O -
CH3
CH3 CH3
CH3 n
HO – Si – O – Si - O -
CH3
CH3 CH3
CH3 n
OC2H5
Si
OC2H5
+ 2C2H5OH
Condensation Silicone Reaction
metal organic ester
ethanol
![Page 44: Imprints, their classification, method of receipt. Classification of materials of imprint. Clinical, physical and chemical descriptions of materials for](https://reader036.vdocuments.net/reader036/viewer/2022062407/56649cf05503460f949bf281/html5/thumbnails/44.jpg)
Manipulation• Mix thoroughly
– paste - paste– paste - liquid
• Putty-wash technique– reduces effect of polymerization shrinkage– stock tray
• putty placed
• thin plastic sheet spacer
• preliminary impression– intraoral custom tray
• inject wash material
![Page 45: Imprints, their classification, method of receipt. Classification of materials of imprint. Clinical, physical and chemical descriptions of materials for](https://reader036.vdocuments.net/reader036/viewer/2022062407/56649cf05503460f949bf281/html5/thumbnails/45.jpg)
Advantages
• Better elastic properties
• Clean, pleasant
• Stock tray– putty-wash
• Good working and setting time
![Page 46: Imprints, their classification, method of receipt. Classification of materials of imprint. Clinical, physical and chemical descriptions of materials for](https://reader036.vdocuments.net/reader036/viewer/2022062407/56649cf05503460f949bf281/html5/thumbnails/46.jpg)
Disadvantages
• Poor dimensional stability– high shrinkage
• polymerization
• evaporation of ethanol
– pour immediately• within 30 minutes
• Hydrophobic– poor wettability
![Page 47: Imprints, their classification, method of receipt. Classification of materials of imprint. Clinical, physical and chemical descriptions of materials for](https://reader036.vdocuments.net/reader036/viewer/2022062407/56649cf05503460f949bf281/html5/thumbnails/47.jpg)
Elastic
Aqueous Hydrocolloids
Non-aqueous Elastomers
Polysulfide
Silicones
Polyether
Condensation
Addition
Agar (reversible)
Alginate (irreversible)
![Page 48: Imprints, their classification, method of receipt. Classification of materials of imprint. Clinical, physical and chemical descriptions of materials for](https://reader036.vdocuments.net/reader036/viewer/2022062407/56649cf05503460f949bf281/html5/thumbnails/48.jpg)
Addition Silicones• AKA: Vinyl polysiloxane• Indications
– crown and bridge– denture– bite registration
• Examples– Extrude (Kerr)– Express (3M/ESPE)– Aquasil (Dentsply Caulk)– Genie (Sultan Chemists)– Virtual (Ivoclar Vivadent)
![Page 49: Imprints, their classification, method of receipt. Classification of materials of imprint. Clinical, physical and chemical descriptions of materials for](https://reader036.vdocuments.net/reader036/viewer/2022062407/56649cf05503460f949bf281/html5/thumbnails/49.jpg)
Composition
• Improvement over condensation silicones– no by-product
• First paste– vinyl poly(dimethylsiloxane)
prepolymer
• Second paste– siloxane prepolymer
• Catalyst– chloroplatinic acid
Phillip’s 1996
![Page 50: Imprints, their classification, method of receipt. Classification of materials of imprint. Clinical, physical and chemical descriptions of materials for](https://reader036.vdocuments.net/reader036/viewer/2022062407/56649cf05503460f949bf281/html5/thumbnails/50.jpg)
O
H - Si – CH3
O
CH3 - Si - H
O
---O – Si – CH = CH2
CH3
CH3 CH = CH2 – Si – O ---
CH3
CH3
O
- Si – CH3
O
CH3 - Si -
O
---O – Si – CH2 - CH2
CH3
CH3
CH2 - CH2 – Si – O ---
CH3
CH3
Chloroplatinic Acid Catalyst
Addition Silicone Reaction
![Page 51: Imprints, their classification, method of receipt. Classification of materials of imprint. Clinical, physical and chemical descriptions of materials for](https://reader036.vdocuments.net/reader036/viewer/2022062407/56649cf05503460f949bf281/html5/thumbnails/51.jpg)
Manipulation
• Adhesive to tray
• Double mix– custom tray
• heavy-body
– light-body to prep
• Putty-wash– stock tray
![Page 52: Imprints, their classification, method of receipt. Classification of materials of imprint. Clinical, physical and chemical descriptions of materials for](https://reader036.vdocuments.net/reader036/viewer/2022062407/56649cf05503460f949bf281/html5/thumbnails/52.jpg)
Advantages
• Highly accurate
• High dimensional stability– pour up to one week
• Stock or custom trays
• Multiple casts
• Easy to mix
• Pleasant odor
![Page 53: Imprints, their classification, method of receipt. Classification of materials of imprint. Clinical, physical and chemical descriptions of materials for](https://reader036.vdocuments.net/reader036/viewer/2022062407/56649cf05503460f949bf281/html5/thumbnails/53.jpg)
Disadvantages• Expensive• Sulfur inhibits set
– latex gloves– ferric and Al sulfate
retraction solution
• Pumice teeth beforeimpressing
• Short working time• Lower tear strength• Possible hydrogen gas release
– bubbles on die– palladium added to absorb
![Page 54: Imprints, their classification, method of receipt. Classification of materials of imprint. Clinical, physical and chemical descriptions of materials for](https://reader036.vdocuments.net/reader036/viewer/2022062407/56649cf05503460f949bf281/html5/thumbnails/54.jpg)
Addition Silicones
• Surfactants added– reduce contact angle– improved
• castability– gypsum
• wettability– still need dry field clinically
![Page 55: Imprints, their classification, method of receipt. Classification of materials of imprint. Clinical, physical and chemical descriptions of materials for](https://reader036.vdocuments.net/reader036/viewer/2022062407/56649cf05503460f949bf281/html5/thumbnails/55.jpg)
Elastic
Aqueous Hydrocolloids
Non-aqueous Elastomers
Polysulfide
Silicones
Polyether
Condensation
Addition
Agar (reversible)
Alginate (irreversible)
![Page 56: Imprints, their classification, method of receipt. Classification of materials of imprint. Clinical, physical and chemical descriptions of materials for](https://reader036.vdocuments.net/reader036/viewer/2022062407/56649cf05503460f949bf281/html5/thumbnails/56.jpg)
Polyether
• Indications– crown and bridge– bite registration
• Examples– Impregum F (3M/ESPE)– Permadyne (3M/ESPE)– Pentamix (3M/ESPE)– P2 (Heraeus Kulzer)– Polygel (Dentsply Caulk)
![Page 57: Imprints, their classification, method of receipt. Classification of materials of imprint. Clinical, physical and chemical descriptions of materials for](https://reader036.vdocuments.net/reader036/viewer/2022062407/56649cf05503460f949bf281/html5/thumbnails/57.jpg)
• Base– difunctional epimine-terminated prepolymer– fillers– plasticizers
• Catalyst– aromatic sulfonic acid ester– fillers
• Cationic polymerization– ring opening and chain extension
Composition
![Page 58: Imprints, their classification, method of receipt. Classification of materials of imprint. Clinical, physical and chemical descriptions of materials for](https://reader036.vdocuments.net/reader036/viewer/2022062407/56649cf05503460f949bf281/html5/thumbnails/58.jpg)
SO3-
+ R+
CH3 – CH – CH2 – CO2 – CH – (CH2)n – O – CH – (CH2)n – CO2 –CH2 – CH –CH3
N
H2C CH2
R R
m
N
H2C CH2
N
H2C CH2
R – N – CH2 – CH2 – +N
H2C CH2
N
H2C CH2
R – + +
Polyether Reaction
catalyst
base
ring opening
![Page 59: Imprints, their classification, method of receipt. Classification of materials of imprint. Clinical, physical and chemical descriptions of materials for](https://reader036.vdocuments.net/reader036/viewer/2022062407/56649cf05503460f949bf281/html5/thumbnails/59.jpg)
Manipulation
• Adhesive to tray– stock or custom tray
• very stiff
• Paste-paste mix• Auto-mixing
– hand-held• low viscosity
– mechanical dispenser• high viscosity
![Page 60: Imprints, their classification, method of receipt. Classification of materials of imprint. Clinical, physical and chemical descriptions of materials for](https://reader036.vdocuments.net/reader036/viewer/2022062407/56649cf05503460f949bf281/html5/thumbnails/60.jpg)
Advantages
• Highly accurate• Good dimensional stability• Stock or dual-arch trays• Good surface detail• Pour within one week
– kept dry
• Multiple casts• Good wettability
![Page 61: Imprints, their classification, method of receipt. Classification of materials of imprint. Clinical, physical and chemical descriptions of materials for](https://reader036.vdocuments.net/reader036/viewer/2022062407/56649cf05503460f949bf281/html5/thumbnails/61.jpg)
Disadvantages• Expensive
• Short working time
• Rigid– difficult to remove from undercuts
• Bitter taste
• Low tear strength
• Absorbs water– changes dimension
![Page 62: Imprints, their classification, method of receipt. Classification of materials of imprint. Clinical, physical and chemical descriptions of materials for](https://reader036.vdocuments.net/reader036/viewer/2022062407/56649cf05503460f949bf281/html5/thumbnails/62.jpg)
Impression Material Usage*Civilian General Dentists
• Crown & Bridge– vinylpolysiloxane 81%– alginate 38%– polyether 28%
• Inlays and Onlays– vinylpolysiloxane 71%– polyether 22%– alginate 20%
![Page 63: Imprints, their classification, method of receipt. Classification of materials of imprint. Clinical, physical and chemical descriptions of materials for](https://reader036.vdocuments.net/reader036/viewer/2022062407/56649cf05503460f949bf281/html5/thumbnails/63.jpg)
Impression Material Usage*Civilian General Dentists
• Complete dentures– alginate 58%– vinylpolysiloxane 55%– polyether 27%
• Partial dentures– alginate 78%– vinylpolysiloxane 43%– polyether 15%
![Page 64: Imprints, their classification, method of receipt. Classification of materials of imprint. Clinical, physical and chemical descriptions of materials for](https://reader036.vdocuments.net/reader036/viewer/2022062407/56649cf05503460f949bf281/html5/thumbnails/64.jpg)
Handling Properties
Agar Alginate PolysulfideCondensation
SiliconeAddition Silicone
Polyether
PreparationBoil,
temper, store
Powder, water
2 pastes2 pastes or paste/liquid
2 pastes 2 pastes
Ease of Use Technique sensitive
Good Fair Fair Excellent Good
Patient Reaction
Thermal Shock
Pleasant, clean
Unpleasant, stains
Pleasant, clean
PleasantUnpleasant
clean
Ease of removal
Very easy
Very easy
Easy Moderate ModerateModerate to difficult
Disinfection Poor Poor Fair Fair Excellent Fair
![Page 65: Imprints, their classification, method of receipt. Classification of materials of imprint. Clinical, physical and chemical descriptions of materials for](https://reader036.vdocuments.net/reader036/viewer/2022062407/56649cf05503460f949bf281/html5/thumbnails/65.jpg)
Handling Properties
Agar Alginate PolysulfideCondensation
SiliconeAddition Silicone
Polyether
Working Time (min)
7 – 15 2.5 5 – 7 3 2 –4.5 2.5
Setting Time
(min)5 3.5 8 – 12 6 – 8 3 – 7 4.5
Stability 1 hour 100% RH
Immediate pour
1 hourImmediate
pour1 week
1 week kept dry
Wettability and
castabilityExcellent Excellent Fair Fair
Fair to good
Good
Cost Low Very low Low ModerateHigh to
very highVery high
![Page 66: Imprints, their classification, method of receipt. Classification of materials of imprint. Clinical, physical and chemical descriptions of materials for](https://reader036.vdocuments.net/reader036/viewer/2022062407/56649cf05503460f949bf281/html5/thumbnails/66.jpg)
Properties
Agar Alginate PolysulfideCondensation
SiliconeAddition Silicone
Polyether
Elastic Recovery (%)
98.8 97.3 94.5 – 96.9 98.2 – 99.6 99 – 99.9 98.3 – 99.0
Flexibility (%) 11 12 8.5 – 20.0 3.5 – 7.8 1.3 – 5.6 1.9 – 3.3
Flow (%) -- -- 0.4 – 1.9 < 0.10 < 0.05 < 0.05
Shrinkage, 24 hours (%)
Extreme Extreme 0.4 – 0.5 0.2 – 1.0 0.01 – 0.2 0.2 – 0.3
Tear Strength (g/cm)
700380 – 700
2240 – 7410 2280 – 43701640 – 5260
1700 - 4800
![Page 67: Imprints, their classification, method of receipt. Classification of materials of imprint. Clinical, physical and chemical descriptions of materials for](https://reader036.vdocuments.net/reader036/viewer/2022062407/56649cf05503460f949bf281/html5/thumbnails/67.jpg)
Comparison of Properties
• Working time– longest to shortest
• agar > polysulfide > silicones > alginate = polyether
• Setting time– shortest to longest
• alginate < polyether < agar < silicones < polysulfide
![Page 68: Imprints, their classification, method of receipt. Classification of materials of imprint. Clinical, physical and chemical descriptions of materials for](https://reader036.vdocuments.net/reader036/viewer/2022062407/56649cf05503460f949bf281/html5/thumbnails/68.jpg)
Comparison of Properties
• Stiffness– most to least
• polyether > addition silicone > condensation silicone > polysulfide = hydrocolloids
• Tear strength– greatest to least
• polysulfide > addition silicone > polyether > condensation silicone >> hydrocolloids
![Page 69: Imprints, their classification, method of receipt. Classification of materials of imprint. Clinical, physical and chemical descriptions of materials for](https://reader036.vdocuments.net/reader036/viewer/2022062407/56649cf05503460f949bf281/html5/thumbnails/69.jpg)
Comparison of Properties
• Cost– lowest to highest
• alginate < agar = polysulfide <condensation silicone < addition silicone < polyether
• Dimensional stability– best to worst
• addition silicone > polyether > polysulfide > condensation silicone > hydrocolloid
Phillip’s 1996
![Page 70: Imprints, their classification, method of receipt. Classification of materials of imprint. Clinical, physical and chemical descriptions of materials for](https://reader036.vdocuments.net/reader036/viewer/2022062407/56649cf05503460f949bf281/html5/thumbnails/70.jpg)
Comparison of Properties
• Wettability– best to worst
• hydrocolloids > polyether > hydrophilic addition silicone > polysulfide > hydrophobic addition silicone = condensation silicone
• Castability– best to worst
• hydrocolloids > hydrophilic addition silicone > polyether > polysulfide > hydrophobic addition silicone = condensation silicone
![Page 71: Imprints, their classification, method of receipt. Classification of materials of imprint. Clinical, physical and chemical descriptions of materials for](https://reader036.vdocuments.net/reader036/viewer/2022062407/56649cf05503460f949bf281/html5/thumbnails/71.jpg)
Regularly-Used Impression Materials*Civilian Practitioners
• Alginate 88%
• Polyvinyl Siloxane 85%
• Polyether 27%
• Other 6%
![Page 72: Imprints, their classification, method of receipt. Classification of materials of imprint. Clinical, physical and chemical descriptions of materials for](https://reader036.vdocuments.net/reader036/viewer/2022062407/56649cf05503460f949bf281/html5/thumbnails/72.jpg)
Summary
• Study models– Alginate most widely used
• inexpensive
• displaces moisture
• lower detail reproduction
• dimensionally unstable
![Page 73: Imprints, their classification, method of receipt. Classification of materials of imprint. Clinical, physical and chemical descriptions of materials for](https://reader036.vdocuments.net/reader036/viewer/2022062407/56649cf05503460f949bf281/html5/thumbnails/73.jpg)
Summary
• Prosthodontics– Addition silicones most popular
• accurate
• dimensionally stable
• user friendly
• expensive