including weights spf grooved product for fire protection · spf grooved product for fire...

Price Sheet GRVD.IMPT.06.10C | Effective: June 28, 2010 | Cancels Price Sheet GRVD.IMPT.01.09C of January 5, 2009SPF GROOVED PRODUCT FOR FIRE PROTECTION

www.anvilstar.com

Including Weights

FREIGHT ALLOWANCE:All prices quoted F.O.B. our Distribution Centre, Simcoe, Ontario; Alberta; Quebec or freight equalized thereon; with full freight allowed on 1,000 lbs. or $1,500 to recognized delivery points in Canada. All shipments will be made from the nearest distribution centre via the least expensive mode, unless otherwise instructed. Whenever a buyer selects a more expensive method for shipment, or alternate distribution centre, the difference in transportation costs will be for the buyer’s account.

NOTE:All orders are accepted on the basis of prices in effect at the time of shipment.

NOTICE:To the prices and terms quoted, there will be added any manufacturers or sales tax payable on the transaction under any effective statute.

GENERAL • UpC numbers and SpIN commodity identification numbers are

available upon request. • To obtain current ISO certifications, listings, and other approvals, visit Anvil’s

Web site at www.anvilintl.com.• pricing is subject to change without notice. Go to Anvil’s Web site for the most

current list price information, or contact your local Anvil representative.

LOSS OR DAMAGE CLAIMS:All goods are shipped at buyer’s risk. Shipments should be carefully examined upon delivery and before the carrier’s delivery receipt is signed. If any loss or damage is evident, the buyer should make an appropriate notation on the delivery receipt and insist that the carrier’s driver initial such exception. The contents of all packages should be carefully examined for concealed damage as soon as possible after delivery, so that the carrier can be requested, within 48 hours after delivery, to arrange for prompt inspection of the damaged goods.

NATIONAL TOLL FREE HOTLINE800 -661-8998

FOR THE MOST CURRENT PRODUCT/PRICING INFORMATION ON ANVIL PRODUCTS, PLEASE VISIT OUR WEBSITE AT WWW.ANVILINTL.COM

www.anvilintl.com

SPF GROOVED PRODUCT FOR FIRE PROTECTION Price List

Revised:

Effective Date: June 28, 2010 | Replaces Prior Date: January 2009 | Sheet # GRVD.IMPT.06.10C

2

1. CONTROLLING PROVISIONS:These terms and conditions shall control with respect to any purchase order or sale of Seller’s products. No waiver, alteration or modification of these terms and conditions whether on Buyer’s purchase order or otherwise shall be valid unless the waiver, alteration or modification is specifically accepted in writing and signed by an authorized representative of Seller.

2. DELIVERY:Seller will make every effort to complete delivery of products as indicated on Seller’s acceptance of an order, but Seller assumes no responsibility or liability, and will accept no backcharge, for loss or damage due to delay or inability to deliver caused by acts of God, war, labor difficulties, accident, delays of carriers, by contractors or suppliers, inability to obtain materials, shortages of fuel and energy, or any other causes of any kind whatever beyond the control of Seller. Seller may terminate any contract of sale of its products without liability of any nature, by written notice to Buyer, in the event that the delay in delivery or performance resulting from any of the aforesaid causes shall continue for a period of sixty (60) days. Under no circumstances shall Seller be liable for any special or consequential damages or for loss, damage, or expense (whether or not based on negligence) directly or indirectly arising from delays or failure to give notice of delay.

3. WARRANTY:Seller warrants for one year from the date of shipment Seller’s manufactured products to the extent that Seller will replace those having defects in material or workmanship when used for the purpose and in the manner which Seller recommends. If Seller examination shall disclose to its satisfaction that the products are defective, and an adjustment is required, the amount of such adjustment shall not exceed the net sales price of the defective products only and no allowance will be made for labor or expense of repairing or replacing defective products or workmanship of damage resulting from the same. Seller warrants the products which it sells of other manufacturers to the extent of the warranties of their respective makers. Where engineering design or fabrication work is supplied. Buyer’s acceptance of Seller’s design or of delivery of work shall relieve Seller of all further obligation, other than expressed in Seller’s product warranty. THIS IS SELLER’S SOLE WARRANTY. SELLER MAKES NO OTHER WARRANTY OF ANY KIND, EXpRESSED OR IMpLIED AND ALL IMpLIED WARRANTIES OF MERCHANTABILITY AND FOR A pARTICULAR pURpOSE WHICH EXCEED SELLER’S AFORESTATED OBLIGATION ARE HEREBY DISCLAIMED BY SELLER AND EXCLUDED FROM THIS WARRANTY. Seller neither assumes, nor authorizes any person to assume for it, any other obligation in connection with the sale of its engineering designs or products. This warranty shall not apply to any products or parts of products which (a) have been repaired or altered outside of Seller’s factory, in any manner: (b) have been subjected to misuse, negligence or accidents; (c) have been used in a manner contrary to Seller’s instructions or recommendations. Seller shall not be responsible for design errors due to inaccurate or incomplete information supplied by Buyer or its representatives.

4. SELLER’S LIABILITY:Seller will not be liable for any loss, damage, cost of repairs, incidental or consequential damages of any kind, whether based upon warranty (except for the obligation accepted by Seller under “Warranty” above), contract or negligence, arising in connection with the design, manufacture, sale, use or repair of the products or of the engineering designs supplied to Buyer.

5. RETURNS:Seller cannot accept return of any products unless its written permission has been first obtained, in which case same will be credited subject to the following (a) All material returned must, on its arrival at Seller’s plant, be found to be in first-class condition; if not, cost of putting in saleable condition will be deducted from credit memoranda; (b) A handling charge deduction of twenty-five percent (25%) will be made from all credit memoranda issued for material returned; (c) Transportation charges, if not prepaid will be deducted from credit memoranda.

6. SHIPMENTS:All products sent out will be carefully examined, counted and packed. The cost of any special packing or special handling caused by Buyer’s requirements or requests shall be added to the amount of the order. No claim for shortages will be allowed unless made in writing within ten (10) days of receipt of a shipment.

Claims for products damaged or lost in transit should be made on the carrier, as Seller’s responsibility ceases, and title passes, on delivery to the carrier.

7. SPECIAL PRODUCTS:Orders covering special or nonstandard products are not subject to cancellation except on such terms as Seller may specify on application.

8. PRICES AND DESIGNS:prices and designs are subject to change without notice. All prices are F.O.B. point of shipment, unless otherwise stated.

9. TAXES:The amount of any sales, excise or other taxes, if any, applicable to the products covered by this order, shall be paid by Buyer unless Buyer provides Seller with an exemption certificate acceptance to the taxing authorities.

10. NUCLEAR PLANTS:Where the products, engineering design or fabrication is for nuclear plant applications. Buyer agrees (a) to take all necessary steps to add Seller as an insured under the American Nuclear Insurers’ (ANI) pool and under the Mutual Atomic Energy Reinsurance pool (MAERp) for property damage and liability insurance and if necessary steps could have been taken, but are not taken, Buyer shall hold Seller harmless against all such losses which could have been thus covered (b) Buyer agrees to hold Seller harmless with respect to any personal injury (for death), property damage or other loss in a nuclear incident which is caused directly or indirectly by defective design, material, workmanship furnished by Seller (or which could be so covered but with respect to which Buyer has elected to self-insure), and further agrees to waive subrogation by its carriers of such insurance against Seller, and (c) as to nuclear hazards for which Buyer cannot obtain insurance coverage, the liability of Seller for any personal injury (or death), property damage or other loss directly caused by defective design, material, or workmanship furnished by Seller shall not exceed the value at the time of the loss occurrence.

11. MINIMUM INVOICE:Domestic: $100 plus transportation. International: $500 plus transportation.

12. TERMS:Cash, net 30 days unless otherwise specified.

NOTE: All orders are accepted on the basis of prices in effect at the time of shipment.

NOTICE: The prices and terms quoted, there will be added any manufacturers or sales tax payable on the transaction under any effective statute.

FREIGHT ALLOWANCE: All prices quoted F.O.B. our Distribution Centre, Simcoe, Ontario; Alberta; Quebec or freight equalized thereon; with full freight allowed on 1,000 lbs. or $1,500 to recognized delivery points in Canada. All shipments will be made from the nearest distribution centre via the least expensive mode, unless otherwise instructed. Whenever a buyer selects a more expensive method for shipment, or alternate distribution centre, the difference in transportation costs will be for the buyer’s account.

www.anvilintl.com


Revised:


3

Bolts/Nuts

Grooved couplings, fittings mechanical tees and valves are listed with UL, ULC and approved by FM for fire sprinkler installation, or currently in the submittal process. Please contact Star Fittings for a copy of submittal sheet GRS 1.3 for the latest update.

NO. 171-97E - Mechanical grooved couplings, fittings, saddles, and cast iron threaded fittings, for sprinkler pipe only.

Loss Prevention Certification Board

Canadian Registration Number (OA3694.1)

MEA

C.R.N.

Approvals

Standard Gaskets - Your order must specify gasket grade

U-Bolts Carbon steel SAE grade 2. Zinc electroplated to ASTM A-164.

Oval Neck Track Heat-treated to conform to ASTM A-183 minimum tensile strength 110,000 PSI with yield point of Head Bolts 80,000 PSI. Zinc electroplated to ASTM A-164.

Heavy Hex Nuts SAE J995 Grade 2 or ASTM A536 Grade “A” or “B”. Zinc Electroplated to ASTM A-164.

Hex Flange Lock Nuts Carbon steel per ASTM A-194. Zinc electroplates to ASTM A-164.

Housings & Fittings

Standard Gasket Flush Gasket

VdS

GRADETEMPERATURE

RANGECOMPOUND

(COLOR STRIPE) GENERAL SERVICE APPLICATION

AAmbient

-40°F to +150°F (-40°C to +65°C)

EPDM (Purple)

Applicable for wet and dry (oil free air) sprinkler services.

E -40°F to +230°F (-40°C to +110°C)

EPDM(Green)

Water, dilute acids, alkalizes, salts, and many chemical services not involving hydrocarbons, oils, or gases. Excellent oxidation resistance. NOT FOR USE WITH HYDROCARBONS.

T -20°F to +180°F(-29°C to +82°C)

Nitrile(Orange)

Petroleum products, vegetable oils, mineral oils and air contaminated with petroleum oils. NOT FOR USE IN HOT WATER OR HOT DRY AIR SERVICE.

ASTM A-536 All ductile iron housings and fittings meet or exceed material conforming to ASTM A-536.

ASTM A-53 or A-135 All segmentally welded fittings std weight except E-9 and K-9 is SCH 10.

ASTM 234 WPB/ASA B16.9 Forged Steel Fittings.ASTM A53 or A135

ASTM A-312/A-312M Stainless steel fittings grade TP304L or TP316L.

ANSI/ASME All MT-1 mechanical tees are NPT standard conforming to ANSI-ASME B1.20.1.

BS 21 All MT-8 mechanical tees are British parallel joining threads.

Finish All grooved coupling housings and fittings are finished with a rust inhibiting orange paint. Hot dipped galvanizing per ASTM A-153 is also available upon request.

ASME/ANSI B16.1 F-1, F-2, F-4 & SF-1 flange drilling conforms to ASME/ANSI B16.1 for class 125 cast iron flanges.

C US

www.anvilintl.com


Revised:


4

Terms and Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2Approvals, Gasket Material, Bolts/Nuts, Housing & Fittings . . . . . . . . . . . . . . . . . . . . . . . . . .3

Couplings/Flange Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 7C-3 LW Flexible Couplings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5C-4 Rigid Couplings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5RC-2 Reducing Coupling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6SF-1 Grooved Flange Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6F-3 Grooved Flange Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Fittings for Fire Protection (Short Body Fittings) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7SE-1 90° Elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7ST-1 Straight Tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Fittings for Grooved-End Pipe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 15E-1 90° Elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8E-2 45° Elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8E-3 22¹/₂° Elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9E-4 11¹/₄° Elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9E-9 90° Drain Elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9K-9 Drain Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9SE-5 90° Reducing Elbow (Groove x Thread) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10SK-1 Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10F-2 Flange Nipple ANSI 150 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11X-1 Steel Cross . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11T-1 Straight Tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11T-2 Reducing Tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12T-3 Reducing Tee (Threaded Branch) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13R-1 Concentric Reducer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

Mechanical Branch Tees . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15 - 17MT-1 Threaded Mechanical Branch Tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15MT-2 Grooved Mechanical Branch Tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16MT-30 Threaded Mechanical Branch Tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

Valves for Grooved-End Pipe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18Series 78FP UL/FM Fire Check Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18Figure AE7722-3D UL/FM Butterfly Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

Spare Parts/Lubricants . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19Bolts and Nuts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19Gaskets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19Continuity Clips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19Lubricants . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

Cross Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

Table of Contents

www.anvilintl.com


Revised:


5

Couplings/Flange Adapter

STYLE C-3 (AMBIENT)LW FLEXIBLE COUPLINGS

NOMINAL SIzE (INChES)

NOMINAL SIzE (MM)

wEIGhT EACh (LbS)

PLATED NUT AND bOLT ONLy

COUPLINGS COMPLETE qUANTITy“A” GASkET FLUSh “E” GASkET

bOx CRATENO. SIzE (INChES) PAINTED GALV. PAINTED GALV.1¹⁄₄ 32 1.25 2 ³⁄₈ x 2 $9.51 $16.38 $15.87 $24.57 75 9001¹⁄₂ 40 1.46 2 ³⁄₈ x 2 $9.99 $17.23 $16.59 $25.86 60 7202 50 1.72 2 ³⁄₈ x 2¹⁄₄ $10.63 $17.39 $17.80 $26.10 50 600

2¹⁄₂ 65 1.98 2 ³⁄₈ x 2¹⁄₄ $12.40 $20.83 $20.62 $31.25 40 4803 80 2.58 2 ³⁄₈ x 2¹⁄₂ $14.74 $24.72 $24.49 $37.05 - 6004 100 4.14 2 ¹⁄₂ x 2³⁄₄ $19.09 $32.32 $33.83 $48.49 - 2756 150 7.00 2 ⁵⁄₈ x 3¹⁄₄ $33.35 $56.46 $59.61 $84.66 - 1508 200 13.00 2 ⁵⁄₈ x 4¹⁄₄ $56.79 $98.26 $94.65 $147.33 - 75

Standard Gasket Flush Gasket

- Sold in box only

STYLE C-4 (AMBIENT)RIGID COUPLINGS


NOMINAL SIzE (MM)

wEIGhT EACh (LbS)


COUPLINGS COMPLETE qUANTITy“A” GASkET FLUSh “E” GASkET

bOx CRATENO. SIzE (INChES) PAINTED GALV. PAINTED GALV.1¹⁄₄ 32 1.48 2 ³⁄₈ x 2 $6.19 $15.38 $11.69 $16.51 75 9001¹⁄₂ 40 1.66 2 ³⁄₈ x 2 $6.57 $16.18 $12.24 $17.31 60 7202 50 1.83 2 ³⁄₈ x 2¹⁄₄ $7.04 $12.83 $13.14 $16.61 50 600

2¹⁄₂ 65 2.04 2 ³⁄₈ x 2¹⁄₂ $10.15 $15.29 $15.26 $21.50 40 4803 OD 76 2.25 2 ³⁄₈ x 2¹⁄₂ NOT AVAILABLE

3 80 2.41 2 ³⁄₈ x 2¹⁄₂ $11.68 $18.13 $20.88 $24.93 - 4654 100 3.17 2 ³⁄₈ x 2¹⁄₂ $13.31 $23.72 $25.08 $27.00 - 3005 125 5.15 2 ¹⁄₂ x 3 $31.01 $49.09 - - - 2206 150 5.84 2 ¹⁄₂ x 3 $22.95 $53.02 $44.07 $47.50 - 160

6¹⁄₂ OD 165 5.84 2 ¹⁄₂ x 3 NOT AVAILABLE8 200 10.82 2 ⁵⁄₈ x 3¹⁄₂ $46.64 $72.15 $69.95 $75.37 - 80

10 250 21.50 2 ⁷⁄₈ x 5 $168.03 $283.02 - - - 4012 300 27.36 2 ⁷⁄₈ x 5¹⁄₂ $219.74 $366.74 - - - 30

- Sold in box only

www.anvilintl.com


Revised:


6

STYLE RC-2 REDUCING COUPLING


NOMINAL SIzE (MM)

wEIGhT EACh (LbS)


COUPLINGS COMPLETEwITh

“E” GASkET

qUANTITy

bOx CRATENO. SIzE (INChES) PAINTED GALV.2 x1½ 50 x 40 2.05 2 ³⁄₈ x 2 - $32.73 50 6002½ x 2 65 x 50 2.84 2 ³⁄₈ x 2 $27.00 $48.52 35 4203 x 2 80 x 50 3.65 2 ¹⁄₂ x 2³⁄₄ $30.93 $49.08 25 300

3 x 2½ 80 x 65 4.26 2 ¹⁄₂ x 2³⁄₄ $30.13 $42.06 25 3004 x 2 100 x 50 5.36 2 ¹⁄₂ x 2³⁄₄ $49.30 $88.74 15 180

4 x 2½ 100 x 65 5.42 2 ¹⁄₂ x 2³⁄₄ $44.06 - 15 1804 x 3 100 x 80 5.62 2 ¹⁄₂ x 2³⁄₄ $41.32 $65.58 15 1805 x 4 125 x 100 6.95 2 ⁵⁄₈ x 3¹⁄₄ $66.94 $205.11 - -6 x 4 150 x 100 6.94 2 ⁵⁄₈ x 3¹⁄₄ $84.50 $152.27 - 1508 x 6 200 x150 11.28 2 ⁷⁄₈ x 5 $126.87 $228.54 - 70

- Sold in box only

STYLE F-3GROOVED FLANGE ADAPTER


NOMINAL SIzE (MM)

wEIGhT EACh (LbS)

COMPLETEwITh OSTEPDM GASkET

qUANTITy

bOx CRATEPAINTED GALV.2 50 $38.66 $52.08 1 300

2¹⁄₂ 65 $42.25 $56.85 1 2283 80 $76.48 $108.93 1 1624 100 $99.73 $141.24 1 1445 125 $106.68 $270.88 1 1086 150 $139.04 $198.11 1 1088 200 $173.04 $246.56 1 90

10 250 POA POA 1 6012 300 POA POA 1 60

- Sold in box only

Note: Not recommended for Vacuum Service

www.anvilintl.com


Revised:


7

STYLE SE-190° ELBOW

STYLE ST-1STRAIGHT TEE

Fittings for Grooved-End Pipe (Short Body)


NOMINAL SIzE (MM)

wEIGhT EACh (LbS)

PRICE EAChqUANTITy

bOx CRATEPAINTED GALV.2 50 1.50 $7.22 $11.44 40 480

2¹⁄₂ 65 2.14 $10.45 $16.43 28 3363 80 3.60 $15.95 $24.25 - 2504 100 5.78 $22.55 $34.88 - 1286 150 11.78 $65.97 $101.58 - 408 200 21.10 $130.01 $222.48 - 18


NOMINAL SIzE (MM)

wEIGhT EACh (LbS)

PRICE EAChqUANTITy

bOx CRATEPAINTED GALV.2 50 2.90 $11.21 $20.06 30 360

2¹⁄₂ 65 4.60 $16.59 $29.56 20 2403 80 6.90 $23.37 $38.34 - 1744 100 10.90 $35.72 $61.94 - 966 150 25.00 $87.85 $139.11 - 308 200 42.10 $229.81 $323.90 - 14

- Sold in box only

www.anvilintl.com


Revised:


8

Fittings for Grooved-End Pipe

STYLE E-190° ELBOW (DUCTILE IRON)

STYLE E-245° ELBOW (DUCTILE IRON)


NOMINAL SIzE (MM)

wEIGhT EACh (LbS)

PRICE EACh qUANTITy

PAINTED GALV. bOx CRATE1¹⁄₄ 32 0.85 $6.70 $13.45 84 1,0081¹⁄₂ 40 0.90 $6.76 $13.69 72 8642 50 1.47 $7.21 $14.50 35 420

2¹⁄₂ 65 2.90 $12.97 $21.02 20 2403 OD 76 NOT AVAILABLE

3 80 4.22 $18.37 $29.97 - 2174 100 6.68 $26.26 $35.12 - 1005 125 11.94 $81.84 $116.88 - 526 150 14.50 $75.96 $124.37 - 33

6¹⁄₂ OD 165 NOT AVAILABLE8 200 32.20 $149.58 $234.49 - 15

10 250 54.11 $441.18 $578.10 - 1212 300 70.00 $699.48 $1,008.25 - 8


NOMINAL SIzE (MM)

wEIGhT EACh (LbS)

PRICE EACh qUANTITy

PAINTED GALV. bOx CRATE1¹⁄₄ 32 0.59 $7.23 $11.83 147 1,7641¹⁄₂ 40 0.78 $7.46 $11.83 102 1,2242 50 1.02 $5.80 $13.42 60 720

2¹⁄₂ 65 1.80 $7.49 $19.42 32 3843 OD 76 NOT AVAILABLE

3 80 2.79 $15.64 $27.72 - 3504 100 4.90 $23.07 $37.04 - 1505 125 11.32 $65.09 $113.42 - 806 150 11.55 $65.09 $114.93 - 60

6¹⁄₂ OD 165 NOT AVAILABLE8 200 17.90 $142.39 $216.72 - 32

10 250 30.00 $366.25 $458.82 - 1612 300 40.40 $520.78 $635.84 - 12

- Sold in box only

- Sold in box only

www.anvilintl.com


Revised:


9

STYLE E-990° DRAIN ELBOW

STYLE E-3*22¹/₂° ELBOW

STYLE E-4*11¹/₄° ELBOW

STYLE K-9DRAIN CAP

NOMINAL PIPE SIzE (INChES)

NOMINAL SIzE (MM)

wEIGhT EACh (LbS)

PRICE EACh

PAINTED GALV.1¹⁄₄ 32 0.80 POA POA1¹⁄₂ 40 0.70 $46.16 $252.792 50 1.60 $46.16 POA

2¹⁄₂ 65 2.10 POA POA3 80 3.10 $53.73 $87.084 100 5.40 $71.93 $116.565 125 7.80 POA POA6 150 8.30 $203.60 $329.868 200 17.90 $426.29 $690.73

10 250 30.00 POA POA12 300 40.40 POA POA


NOMINAL SIzE (MM)

wEIGhT EACh (LbS)

PRICE EACh

PAINTED GALV.1¹⁄₄ 32 0.50 POA POA1¹⁄₂ 40 0.70 POA POA2 50 0.90 POA POA

2¹⁄₂ 65 1.50 POA POA3 80 2.00 POA POA4 100 3.30 POA POA5 125 5.00 POA POA6 150 6.50 POA POA8 200 10.00 POA POA

10 250 14.50 POA POA12 300 29.30 POA POA


NOMINAL SIzE (MM)

wEIGhT EACh (LbS))

PRICE EACh

PAINTED GALV.1¹⁄₄ 32 1.87 POA $141.691¹⁄₂ 40 2.13 POA $141.692 50 2.76 POA $141.69

2¹⁄₂ 65 4.33 $82.39 $141.693 80 5.60 $110.29 $154.344 100 8.80 $114.52 $174.155 125 12.80 POA $248.746 150 18.77 $211.77 $273.718 200 32.64 POA $413.23

10 250 48.50 $679.37 $970.5712 300 66.00 $1,045.40 $1,493.43


NOMINAL SIzE (MM)

wEIGhT EACh (LbS)

PRICE EACh

PAINTED GALV.1¹⁄₄ 32 0.71 $112.13 $160.141¹⁄₂ 40 0.76 $112.13 $160.142 50 0.83 $112.13 $160.14

2¹⁄₂ 65 1.06 $112.13 $160.143 80 1.27 $131.46 $187.774 100 2.92 $138.23 $197.515 125 3.40 $201.54 $287.976 150 4.02 $225.06 $321.568 200 6.66 $266.55 $380.77

* Segmentally welded. * Segmentally welded.

List pricing above is for 1” pol (standard).E-9 is also available in C\v” and Z\x” at same list price as 1” pol.

List pricing above is for 1” pol (standard).K-9 is also available in C\v” and Z\x” at same list price as 1” pol.

www.anvilintl.com


Revised:


10

STYLE SE-5REDUCING 90° ELBOWGR00VE X THREAD

NOMINAL SIzE (INChES)wEIGhT

EACh (LbS)

PRICE EACh qUANTITy

PAINTED GALV. bOx CRATE

1¹⁄₄ x ¹⁄₂ 0.50 $14.17 $22.96 65 3,120x ³⁄₄ 0.54 $12.48 $22.96 65 3,120x 1 0.60 $12.48 $22.96 65 3,120

1¹⁄₂ x ¹⁄₂ 0.63 $12.48 $22.96 65 3,120x ³⁄₄ 0.70 $12.48 $22.96 65 3,120x 1 0.80 $12.48 $20.22 50 2,400

2 x ¹⁄₂ 0.84 $13.05 $24.65 35 1,680x ³⁄₄ 0.93 $13.65 $25.29 35 1,680x 1 1.04 $13.65 $25.29 35 1,680

2¹⁄₂ x ¹⁄₂ 1.18 $13.29 $25.13 30 1,200x ³⁄₄ 1.30 $20.32 $27.55 25 1,200x 1 1.50 $20.32 $27.55 25 1,200

3 x ³⁄₄ 2.20 $25.29 $32.95 20 960x 1 2.50 $20.32 $32.95 20 960

- Sold in box only

STYLE SK-1CAP


NOMINAL SIzE (MM)

wEIGhT EACh (LbS)

PRICE EACh qUANTITy

PAINTED GALV. bOx CRATE1¹⁄₄ 32 0.31 $3.05 $5.72 250 3,0001¹⁄₂ 40 0.39 $3.74 $6.45 180 2,1602 50 0.54 $4.32 $6.77 140 1,680

2¹⁄₂ 65 0.75 $5.25 $8.62 95 1,1403 OD 76 NOT AVAILABLE

3 80 1.23 $6.49 $13.85 65 7804 100 1.96 $9.91 $16.59 40 4805 125 4.60 $35.92 $56.14 - -6 150 4.58 $27.08 $50.99 15 180

6¹⁄₂ OD 165 NOT AVAILABLE8 200 6.00 $59.63 $89.65 5 60

10* 250 - $0.00 $205.33 8 9612* 300 - $0.00 $331.07 5 60

- Sold in box only

* - Sizes 10” and 12” are STYLE K-1 Design

www.anvilintl.com


Revised:


11

* Segmentally welded.◊ Flange portion is 150# steel.Larger sizes available upon request.

◊


NOMINAL SIzE (MM)

wEIGhT EACh (LbS)

PRICE EACh

PAINTED GALV.1 25 2.70 $177.62 $254.46

1¹⁄₄ 32 3.30 $177.62 $254.461¹⁄₂ 40 3.90 $177.62 $254.462 50 6.20 POA $254.46

2¹⁄₂ 65 9.90 POA $300.543 80 11.00 POA $324.464 100 47.00 POA $556.775 125 40.00 POA $553.316 150 50.00 POA $659.238 200 60.00 POA $877.85

10 250 60.00 POA $1,376.5412 300 91.00 POA $1,883.78


NOMINAL SIzE (MM)

wEIGhT EACh (LbS)

PRICE EACh

PAINTED GALV.1¹⁄₄ 32 2.00 POA POA1¹⁄₂ 40 2.20 POA POA2 50 2.80 POA POA

2¹⁄₂ 65 3.30 POA POA3 80 4.50 POA POA4 100 6.60 POA POA5 125 9.30 POA POA6 150 14.50 POA POA8 200 28.50 POA POA

10 250 40.50 POA POA12 300 57.00 POA POA

STYLE X-1*STEEL CROSS

* Segmentally welded steel.

STYLE F-2*FLANGE NIPPLE ANSI 150

STYLE T-1STRAIGHT TEE (DUCTILE IRON)


NOMINAL SIzE (MM)

wEIGhT EACh (LbS)

PRICE EACh qUANTITy

PAINTED GALV. bOx CRATE1¹⁄₄ 32 0.39 $9.67 $17.88 56 6721¹⁄₂ 40 1.46 $9.99 $17.88 48 5762 50 2.18 $15.55 $25.29 25 300

2¹⁄₂ 65 3.30 $24.89 $34.56 16 1923 OD 76 NOT AVAILABLE

3 80 6.41 $28.84 $54.69 - 1474 100 9.92 $43.98 $77.65 - 705 125 17.93 $138.39 $202.67 - 406 150 22.00 $126.95 $217.09 - 18

6¹⁄₂ OD 165 NOT AVAILABLE8 200 42.10 $254.14 $414.20 - 12

10 250 72.73 $672.04 $768.50 - 812 300 91.00 $1,183.46 $1,172.70 - 4

- Sold in box only

www.anvilintl.com


Revised:


12

STYLE T-2REDUCING TEE CONTINUED


NOMINAL SIzE (MM)

wEIGhT EACh (LbS)

PRICE EACh

PAINTED GALV.

2 x 2x 1 50 x 50 x 25 2.60 POA POA

x 1¹⁄₄ 50 x 50 x 32 3.00 POA POAx 1 ¹⁄₂ 50 x 50 x 40 3.00 POA POA

2¹⁄₂ x 2¹⁄₂

x 1 65 x 65 x 25 4.40 POA POAx 1¹⁄₄ 65 x 65 x 32 4.40 POA POAx 1 ¹⁄₂ 65 x 65 x 40 4.40 POA POA

x 2 65 x 65 x 50 4.40 POA POA

3 x 3

x 1 80 x 80 x 25 6.05 POA POAx 1¹⁄₄ 80 x 80 x 32 6.05 POA POAx 1¹⁄₂ 80 x 80 x 40 6.05 POA POAx 2 80 x 80 x 50 6.05 POA POA

x 2¹⁄₂ 80 x 80 x 65 6.05 POA POA

4 x 4

x 1 100 x 100 x 25 10.98 POA POAx 1¹⁄₄ 100 x 100 x 32 10.98 POA POAx 1¹⁄₂ 100 x 100 x 40 10.98 POA POAx 2 100 x 100 x 50 10.98 $104.62 $168.19

x 2¹⁄₂ 100 x 100 x 65 12.28 $104.62 $168.19x 3 100 x 100 x 80 11.99 $104.62 $168.19

5 x 5


x 2¹⁄₂ 125 x 125 x 65 13.95 POA POAx 3 125 x 125 x 80 13.95 POA POAx 4 125 x 125 x 100 13.95 POA $0.00

6 x 6

x 1 150 x 150 x 25 25.25 POA POAx 1¹⁄₄ 150 x 150 x 32 25.25 POA POAx 1¹⁄₂ 150 x 150 x 40 25.25 POA POAx 2 150 x 150 x 50 23.54 $247.86 $418.06

x 2¹⁄₂ 150 x 150 x 65 22.79 $335.27 $418.06x 3 150 x 150 x 80 24.95 $247.86 $418.06x 4 150 x 150 x 100 24.20 $247.86 $418.06x 5 150 x 150 x 125 25.39 $334.37 POA

8 x 8

x 1¹⁄₂ 200 x 200 x 40 42.16 POA POAx 2 200 x 200 x 50 42.16 POA POA

x 2¹⁄₂ 200 x 200 x 65 42.16 POA POAx 3 200 x 200 x 80 42.16 POA POAx 4 200 x 200 x 100 41.54 $698.14 POAx 5 200 x 200 x 125 24.80 POA POAx 6 200 x 200 x 150 39.51 $698.14 POA

10 x 10


x 2¹⁄₂ 250 x 250 x 65 69.25 POA POAx 3 250 x 250 x 80 69.25 POA POAx 4 250 x 250 x 100 69.25 POA POAx 5 250 x 250 x 125 69.25 POA POAx 6 250 x 250 x 150 35.60 POA POAx 8 250 x 250 x200 69.25 POA POA


NOMINAL SIzE (MM)

wEIGhT EACh (LbS)

PRICE EACh

PAINTED GALV.

12 x 12

x 1 300 x 300 x 25 100.00 POA POAx 2 300 x 300 x 50 100.00 POA POA

x 2¹⁄₂ 300 x 300 x 65 100.00 POA POAx 3 300 x 300 x 80 100.00 POA POAx 4 300 x 300 x 100 101.60 POA POAx 5 300 x 300 x 125 100.00 POA POAx 6 300 x 300 x 150 100.00 POA POAx 8 300 x 300 x 200 100.00 POA POA

x 10 300 x 300 x 250 101.60 POA POA * Ductile iron, all others segmentally welded.

www.anvilintl.com


Revised:


13


NOMINAL SIzE (MM)

wEIGhT EACh (LbS)

PRICE EACh

PAINTED GALV.

2 x 2

x ³⁄₄* 50 x 50 x 20 2.68 POA POAx 1* 50 x 50 x 25 3.00 POA POA

x 1 ¹⁄₄ 50 x 50 x 32 3.00 POA POAx 1 ¹⁄₂ 50 x 50 x 40 3.00 POA POA

2¹⁄₂ x 2¹⁄₂

x 1 65 x 65 x 25 4.40 POA POAx 1¹⁄₄ 65 x 65 x 32 4.40 POA POAx 1 ¹⁄₂ 65 x 65 x 40 4.40 POA POA

x 2 65 x 65 x 50 4.40 POA POA

3 x 3

x 1* 80 x 80 x 25 6.47 POA POAx 1¹⁄₄ 80 x 80 x 32 6.05 POA POAx 1¹⁄₂* 80 x 80 x 40 6.27 POA POA

x 2 80 x 80 x 50 6.05 POA POAx 2¹⁄₂ 80 x 80 x 65 6.05 POA POA

4 x 4

x 1* 100 x 100 x 25 10.47 POA POAx 1¹⁄₄ 100 x 100 x 32 10.98 POA POAx 1¹⁄₂ 100 x 100 x 40 10.98 POA POAx 2 100 x 100 x 50 10.98 POA POA


5 x 5


x 2¹⁄₂ 125 x 125 x 65 32.95 POA POAx 3 125 x 125 x 80 13.95 POA POAx 4 125 x 125 x 100 13.95 POA POA

6 x 6


x 2¹⁄₂ 150 x 150 x 65 26.50 POA POAx 3 150 x 150 x 80 25.25 POA POAx 4 150 x 150 x 100 25.25 POA POAx 5 150 x 150 x 125 25.25 POA POA

8 x 8


x 2¹⁄₂ 200 x 200 x 65 42.16 POA POAx 3 200 x 200 x 80 42.16 POA POAx 4 200 x 200 x 100 42.16 POA POAx 5 200 x 200 x 125 42.16 POA POAx 6 200 x 200 x 150 42.16 POA POA

CONTINUED

* Ductile iron, all others segmentally welded.

STYLE T-3REDUCING TEE W/ THREADED BRANCH


NOMINAL SIzE (MM)

wEIGhT EACh (LbS)

PRICE EACh

PAINTED GALV.

10 x 10


x 2¹⁄₂ 250 x 250 x 65 69.25 POA POAx 3 250 x 250 x 80 69.25 POA POAx 4 250 x 250 x 100 69.25 POA POAx 5 250 x 250 x 125 69.25 POA POAx 6 250 x 250 x 150 69.25 POA POAx 8 250 x 250 x 200 69.25 POA POA

12 x 12

x 2 300 x 300 x 50 100.00 POA POAx 2¹⁄₂ 300 x 300 x 65 100.00 POA POAx 3 300 x 300 x 80 100.00 POA POAx 4 300 x 300 x 100 100.00 POA POAx 5 300 x 300 x 125 100.00 POA POAx 6 300 x 300 x 150 100.00 POA POAx 8 300 x 300 x 200 100.00 POA POA

x 10 300 x 300 x 250 100.00 POA POA

www.anvilintl.com


Revised:


14


NOMINAL SIzE (MM)

wEIGhT EACh (LbS)

PRICE EACh

PAINTED GALV.1¹⁄₄ x 1 32 x 25 0.85 POA POA

1¹⁄₂ x 1 40 x 25 0.73 POA POAx 1¹⁄₄ 40 x 32 0.95 $18.04 POA

2x 1* 50 x 25 0.80 $18.04 $59.61

x 1¹⁄₄* 50 x 32 0.79 $18.04 $59.61x 1¹⁄₂* 50 x 40 0.79 $18.04 $59.61

2¹⁄₂

x 1 65 x 25 1.50 POA POAx 1¹⁄₄ 65 x 32 1.50 POA POAx 1¹⁄₂ 65 x 40 1.50 $18.04 POAx 2* 65 x 50 1.91 $18.04 $59.61

3

x 1 80 x 25 2.35 POA POAx 1¹⁄₄ 80 x 32 2.35 $25.79 POAx 1¹⁄₂ 80 x 40 2.35 POA POAx 2* 80 x 50 1.41 $25.79 $54.45

x 2¹⁄₂* 80 x 65 1.50 $25.79 $67.82

4

x 1 100 x 25 3.21 POA POAx 1¹⁄₄ 100 x 32 3.21 POA POAx 1¹⁄₂* 100 x 40 2.66 POA POAx 2* 100 x 50 2.51 $25.79 $73.62x 2¹⁄₂ 100 x 65 3.21 $25.79 $90.78x 3* 100 x 80 2.55 $25.79 $90.78x 3¹⁄₂ 100 x 90 1.00 POA POA

5

x 1 125 x 25 4.84 POA $129.77x 1¹⁄₄ 125 x 32 4.84 POA $129.77x 1¹⁄₂ 125 x 40 4.84 POA $129.77x 2 125 x 50 4.84 POA POA

x 2¹⁄₂ 125 x 65 4.84 POA POAx 3 125 x 80 4.84 POA POAx 4 125 x 100 4.84 $68.22 $129.77

6

x 1 150 x 25 7.50 POA POAx 1¹⁄₄ 150 x 32 7.50 POA POAx 1¹⁄₂ 150 x 40 7.50 POA POAx 2* 150 x 50 6.34 $70.88 $171.41

x 2¹⁄₂* 150 x 65 5.10 POA POAx 3* 150 x 80 4.29 $70.88 $171.41x 4* 150 x 100 7.50 $70.88 $155.55x 5 150 x 125 7.50 $70.88 $221.19

8

x 1¹⁄₂ 200 x 40 9.07 POA POAx 2 200 x 50 9.07 POA POA

x 2¹⁄₂ 200 x 65 9.07 POA $310.20x 3* 200 x 80 9.15 POA POAx 4* 200 x 100 9.07 $126.78 $310.20x 5 200 x 125 9.07 POA POAx 6* 200 x 150 9.07 $126.78 $391.96


NOMINAL SIzE (MM)

wEIGhT EACh (LbS)

PRICE EACh

PAINTED GALV.

10

x 1¹⁄₂ 250 x 40 16.38 POA POAx 2 250 x 50 16.38 POA POA

x 2¹⁄₂ 250 x 65 16.38 POA POAx 3 250 x 80 16.38 POA POAx 4 250 x 100 16.38 POA POAx 5 250 x 125 16.38 POA POAx 6 250 x150 16.38 $261.75 $797.46x 8* 250 x 200 23.10 $261.75 POA

12

x 1 300 x 25 19.00 POA POAx 2 300 x 50 19.00 POA POA

x 2¹⁄₂ 300 x 65 19.00 POA POAx 3 300 x 80 19.00 POA POAx 4 300 x 100 19.00 POA POAx 5 300 x 125 19.00 $321.92 $1,352.30x 6 300 x 150 19.00 POA POAx 8 300 x 200 19.00 POA POA

x 10 300 x 250 19.00 POA POA

STYLE R-1CONCENTRIC REDUCER

* Ductile ironSegmentally welded through 4 x 3 unless *Ductile Iron.Forged Steel 5 x 1 and larger unless *Ductile Iron.

CONTINUED

www.anvilintl.com


Revised:


15

Mechanical Branch Tees

STYLE MT-1THREADED MECHANICAL BRANCH TEE***


NOMINAL SIzE (MM)

wEIGhT EACh (LbS)

PLATED NUT AND bOLT ONLy qUANTITy

NO. SIzE (INChES) PAINTED GALV. bOx CRATE

2x 1 50 x 25 1.70 2 ³⁄₈ x 2 $20.38 $33.03 25 300

x 1¹⁄₄ 50 x 32 1.70 2 ³⁄₈ x 2 $20.38 $29.16 25 300x 1¹⁄₂ 50 x 40 1.70 2 ³⁄₈ x 2 $23.20 $33.03 25 300

2¹⁄₂x 1 65 x 25 3.60 2 ¹⁄₂ x 2³⁄₄ $25.13 $40.68 20 240

x 1¹⁄₄ 65 x 32 3.60 2 ¹⁄₂ x 2³⁄₄ $25.13 $40.68 20 240x 1¹⁄₂ 65 x 40 3.60 2 ¹⁄₂ x 2³⁄₄ $25.13 $35.93 20 240

3

x 1 80 x 25 3.80 2 ¹⁄₂ x 2³⁄₄ $26.34 $42.37 15 180x 1¹⁄₄ 80 x 32 3.30 2 ¹⁄₂ x 2³⁄₄ $26.34 $37.38 15 180x 1¹⁄₂ 80 x 40 3.80 2 ¹⁄₂ x 2³⁄₄ $26.34 $42.37 15 180x 2 80 x 50 4.40 2 ¹⁄₂ x 2³⁄₄ $30.21 $43.26 15 180

4

x 1 100 x 25 4.60 2 ¹⁄₂ x 2³⁄₄ $30.53 $49.46 10 120x 1¹⁄₄ 100 x 32 4.60 2 ¹⁄₂ x 2³⁄₄ $30.53 $49.46 10 120x 1¹⁄₂ 100 x 40 4.60 2 ¹⁄₂ x 2³⁄₄ $30.53 $49.46 10 120x 2 100 x 50 4.80 2 ¹⁄₂ x 2³⁄₄ $33.59 $54.53 10 120

x 2¹⁄₂ 100 x 65 5.40 2 ¹⁄₂ x 2³⁄₄ $33.59 $54.53 10 120

5x 1¹⁄₂ 125 x 40 7.40 2 ⁵⁄₈ x 4 $44.30 $63.39 5 60x 2 125 x 50 7.90 2 ⁵⁄₈ x 4 $44.30 $63.39 5 60

x 2¹⁄₂ 125 x 65 7.90 2 ⁵⁄₈ x 4 $46.88 $67.10 5 60

6x 1¹⁄₂ 150 x 40 7.50 2 ⁵⁄₈ x 4 $40.03 $64.92 5 60x 2 150 x 50 8.00 2 ⁵⁄₈ x 4 $40.03 $64.92 5 60

x 2¹⁄₂ 150 x 65 8.00 2 ⁵⁄₈ x 4 $43.42 $70.32 5 60*** All MT-1 branches can be used as mechanical crosses, increase price of largest outlet by 50%. - Sold in box only

www.anvilintl.com


Revised:


16

STYLE MT-2GROOVED MECHANICAL BRANCH TEE***


NOMINAL SIzE (MM)

wEIGhT EACh (LbS)

PLATED NUT AND bOLT ONLy qUANTITy

NO. SIzE (INChES) PAINTED GALV. bOx CRATE

3 x 1¹⁄₂ 80 x 40 3.80 2 ¹⁄₂ x 2³⁄₄ $26.34 $42.69 15 180x 2 80 x 50 4.40 2 ¹⁄₂ x 2³⁄₄ $30.21 $43.18 15 180

4

x 1¹⁄₂ 100 x 40 4.60 2 ¹⁄₂ x 2³⁄₄ $31.82 $51.55 10 120x 2 100 x 50 4.80 2 ¹⁄₂ x 2³⁄₄ $33.59 $54.37 10 120

x 2¹⁄₂ 100 x 65 5.40 2 ¹⁄₂ x 2³⁄₄ $33.19 $53.73 10 120x 3 OD 100 x 76 - 2 ¹⁄₂ x 3¹⁄₄ NOT AVAILABLE

x 3 100 x 80 7.60 2 ¹⁄₂ x 3¹⁄₄ $35.76 $57.92 10 120

5 x 2 125 x 50 7.90 2 5⁄₈ x 4 $139.52 $169.32 5 60x 2¹⁄₂ 125 x 65 7.90 2 5⁄₈ x 4 $130.33 $179.15 5 60

6

x 1¹⁄₂ 150 x 40 8.00 2 5⁄₈ x 4 $48.65 $69.52 5 60x 2 150 x 50 8.00 2 5⁄₈ x 4 $43.42 $70.32 5 60

x 2¹⁄₂ 150 x 65 8.00 2 5⁄₈ x 4 $49.22 $70.32 5 60x 3 OD 150 x 76 - 2 5⁄₈ x 4 NOT AVAILABLE

x 3 150 x 80 9.70 2 5⁄₈ x 4 $46.08 $70.32 4 48x 4 150 x100 13.60 2 5⁄₈ x 4 $51.07 $82.73 4 48

- Sold in box only

www.anvilintl.com


Revised:


17

STYLE MT-30THREADED MECHANICAL BRANCH TEE

*** All MT-8 branches can be used as mechanical crosses, increase price of largest outlet by 50%.

NOMINAL SIzE (INChES)NOMINAL SIzE

(MM)wEIGhT

EACh (LbS)

COMPLETE qUANTITy

PLATED bOx CRATE

1¹⁄₄x ¹⁄₂ 32x15 0.83 $9.67 50 1,600x ³⁄₄ 32x20 0.87 $9.67 50 1,600x 1 32x25 0.97 $9.67 50 1,600

1¹⁄₂ x ¹⁄₂ 40x15 0.64 $9.67 50 1,600x ³⁄₄ 40x20 0.82 $9.67 50 1,600x 1 40x25 0.96 $9.67 50 1,600

2 x ¹⁄₂ 50x15 0.84 $9.99 45 1,440x ³⁄₄ 50x20 0.89 $9.99 45 1,440x 1 50x25 0.96 $9.99 45 1,440

2¹⁄₂ x ¹⁄₂ 65x15 0.89 $11.36 40 1,280x ³⁄₄ 65x20 0.95 $9.99 40 1,280x 1 65x25 1.03 $9.99 40 1,280

Note: BSP equivalent is available as MT-90. - Sold in box only

www.anvilintl.com


Revised:


18


NOMINAL SIzE (MM)

wEIGhT EACh

(LbS) PRICE EACh2 50 7.50 $550.97

2¹⁄₂ 65 10.50 $477.513 80 11.50 $477.514 100 13.50 $477.515 125 19.00 $1,601.136 150 33.50 $1,150.928 200 59.00 $1,322.33

10 250 130.00 $3,691.0312 300 183.00 $6,354.35


NOMINAL SIzE (MM)

wEIGhT EACh

(LbS) PRICE EACh2 50 10.00 POA

2¹⁄₂ 65 10.50 POA3 80 11.50 POA4 100 13.50 POA5 125 19.00 POA6 150 33.50 POA8 200 59.00 POA

10 250 78.04 POA

Valves for Grooved-End Pipe

The series 78FP Check Valve come standard with cast ductile iron body, stainless steel seat ring, hinge pin and closure spring.Clapper seat facing is of Grade “E”.NPT plugs in the body accommodate valve drain-down.Trim options available upon request.

SERIES 78FP UL/FM FIRE CHECK VALVE (300 PSI)

FIGURE AE7722-3DUL/FM BUTTERFLY VALVES (300 PSI)

Valve pre-wired less conduit fitting.EPDM Seats Recommended for Fire Services.

www.anvilintl.com


Revised:


19

LUbRICANTS

STANDARD LUbRICANT PRICE

2LB Tub Std Gruvlok Lubricant $48.34

5 Gallon Pail POA

xTREME LUbRICANT (SILICONE)

10 oz . Tube (1 each) $117.532 .2 lb . Tub (Gruvlok Lubricant) $375.48

Spare Parts/Lubricants

Plated Trackhead Bolts and Nuts for Couplings

Continuity Clips

C1, C-3, C-4 & F-1 Gaskets RC-2 Gaskets

Contact an Anvil Sales Representative for pricing.

xTREME LUbRICANT USAGE GUIDE

SIzE OF GASkET

NUMbER OF GASkETS PER

qUART2” 1,200

3” 900

4” 600

6” 390

8” 300

10” 255

12” 180

14” 150

16” 120

18” 105

20” 90

24” 60

STANDARD LUbRICANT USAGE GUIDE

SIzE OF GASkET

NUMbER OF GASkETS

PER TUbE PER qUART2” 55 400

3” 45 300

4” 25 200

6” 20 130

8” 15 100

10” 10 85

12” 9 60

14” 7 50

16” 6 40

18” 5 35

20” 4 30

24” 3 20


C-1, C-3, C-4 FLUSh GAP

GASkETF-1 “E”

GASkETE TyPE A GASkET

1¹⁄₄ - - $6.361¹⁄₂ $11.12 - $6.692 $12.00 $9.59 $7.17

2¹⁄₂ $13.85 $11.12 $8.303 $16.51 $13.21 $9.914 $22.80 $18.20 $13.615 $235.17 $51.63 $15.636 $39.95 $31.98 $24.008 $63.64 $50.83 $38.18

10 - $150.47 $112.8512 - $196.79 $147.57


RC-1 “E” GASkET

2 x 1½ POA2½ x 2 POA3 x 2 POA

3 x 2½ POA4 x 2 POA

4 x 2½ POA4 x 3 POA5 x 4 POA6 x 4 POA8 x 6 POA

NOMINAL SIzE (INChES) LIST PRICE PIECES1 - 3¹⁄₂ $29.64 -4 - 6 $29.64 -

8 - 12 $29.64 -

bOLT AND NUT

SIzE (INChES) PRICE EACh³⁄₈ x 2 $10.71

³⁄₈ x 2¹⁄₄ $10.71³⁄₈ x 2¹⁄₂ $16.19¹⁄₂ x 2³⁄₄ $11.68¹⁄₂ x 3 $11.52

¹⁄₂ x 3¹⁄₄ POA¹⁄₂ x 3¹⁄₂ $17.40⁵⁄₈ x 2³⁄₄ $13.94⁵⁄₈ x 3¹⁄₄ $14.82⁵⁄₈ x 3¹⁄₂ $15.55⁵⁄₈ x 4 $13.77

⁵⁄₈ x 4¹⁄₄ $20.30³⁄₄ x 4¹⁄₄ $32.06³⁄₄ x 4¹⁄₂ $32.06⁷⁄₈ x 5 $32.06

⁷⁄₈ x 5¹⁄₂ $38.26

www.anvilintl.com


Revised:


20

Cross ReferenceDESCRIPTION GRUVLOk® ANVIL/SPF™ VICTAULIC®

Rigid Coupling 7400 C-4 005

Light Weight Coupling 7000 C-3, C-1 75

Reducer Coupling 7010 RC-1 750

Standard 90° Elbow 7050S/7050 E-1 10

Standard 45° Elbow 7051FP/7051 E-2 11

Standard 22¹⁄2° Elbow 7052 E-3 (SW) 12

Standard 11¹⁄4° Elbow 7053 E-4 (SW) 13

Standard Reducer Tee 7061 T-2 (SW) 25

Straight Tee with Thread Outlet 7063 N/A 29M

Reducing Tee with Thread Outlet 7064 T-3 (SW) 29T

Concentric Reducer 7072 R-1 (SW) 50

Concentric Reducer with Thread Outlet 7076 R-3 (SW) 52

Eccentric Reducer 7073 R-2 (SW) 51 (SW)

Drain Elbow 7050DR E-9 10DR

Short Pattern 90° Elbow 7450 SE-1 001

Short Pattern Straight Tee 7460 ST-1 002

Bullhead Tee 7062 N/A 21

Standpipe Tee 7065 N/A 27

Fire Grooved Cap 7074 SK-1/K-1 006

Cross 7068 X-1 N/A

Thread Mechanical Tee 7045 MT-1 920

End of the Line Fitting 7091 SE-5 N/A

Groove Mechanical Tee 7046 MT-2 920

Sprinkler Outlet Tee (U-Bolt) 7044 MT-3 921, 925

Groove Flange Adapter 7012FP SF-1/F-1 744

Flange/Groove Nipple 7083 F-2 (SW) 41

Plain-End Coupling 7005 N/A 90

Outlet Coupling 7042 N/A 72

TM - Thread Male TF - Thread Female SW - Segmented Welded Fitting – not available in cast ductile fitting.

– NOTES –

Corporate Offices110 Corporate Drive, Suite 10 P.O. Box 3180 Portsmouth, NH 03801-3180

Tel: 603-422-8000 Fax: 603-422-8033

E-mail: [email protected]

U.S. REGIONAL SERVICE CENTERS

Anvil International CanadaCustomer Service Center390 Second AvenueP.O. Box 40Simcoe, Ontario N3Y 4K9

Tel: 519-426-4551Fax: 519-426-5509

CANADA SERVICE CENTER

www.anvilintl.com

B U I L D I N G C O N N E C T I O N S T H A T L A S T

Northern RegionRegional Distribution & Customer Service CenterSERVICING: Illinois, Indiana, Iowa, Kentucky, Michigan, Minnesota, Nebraska, North and South Dakota, Ohio,West Pennsylvania, West Virginia, Wisconsin

750 Central Avenue University Park, IL 60484

Tel: 708-885-3000 Fax: 708-534-5441 Toll Free: 1-800-301-2701

Southern RegionRegional Distribution & Customer Service CenterSERVICING: Alabama, Arkansas, Kansas, Louisiana, Mississippi, Missouri, Oklahoma, Tennessee, Texas

1401 Valley View Lane, Suite 150Irving, TX 75061

Tel: 972-871-1206 Fax: 972-641-8946 Toll Free: 1-800-451-4414

Eastern RegionRegional Distribution CenterSERVICING: Connecticut, Delaware, Florida, Georgia, Maine, Maryland, Massachusetts, New Hampshire, New Jersey,New York, North and South Carolina, East Pennsylvania,Rhode Island, Vermont, Virginia

800 Malleable Road Columbia, PA 17512

Western RegionRegional Distribution CenterSERVICING: Alaska, Arizona, California, Colorado, Hawaii, Idaho, Montana, Nevada, New Mexico, Oregon, Utah, Washington, Wyoming

1385 Greg Street Sparks, NV 89431

INTERNATIONAL SALES

Mexico, Puerto Rico andLatin AmericaAbraham Quijada, Sales [email protected]

Tel: +1-281-590-4600

U.S. Customer Service Tel: +1-708-885-3000 Fax: +1-708-534-5441

Europe and Middle East RegionRick van Meesen, Sales DirectorThe [email protected]

Tel: +31-53-5725570 Fax: +31-53-5725579

U.S. Customer Service Tel: +1-708-885-3000 Fax: +1-708-534-5441

EasternSERVICING: Quebec, New Brunswick,Prince Edward Island, Newfoundland

3767 Thimens, Suite 225 (Saint-Laurent)Montreal, Quebec, H4R 1W4

Tel: 514-745-3835

including weights spf grooved product for fire protection · spf grooved product for fire...

Documents