indicator - vage
TRANSCRIPT
Avery Weigh-Tronix Technical Specification E1005
1
E1005indicator
Description
GeneralThis specification describes theE1005 indicator, capable ofstand-alone operation, or ofintegration into a larger systemvia serial interface.
It is a microprocessor-basedindustrial weighing system with upto 100,000 displayed incrementsfor analysing, displaying, storingand transmitting gross and netweight information.
Up to four analogue load cells tobe connected with the indicator.The E1005 can be matched toalmost any load cell system toachieve optimum accuracy,stability and repeatability.
The indicator can control itssurrounding process usingconfigurable outputs.
Configurable FeaturesThe E1005 features a keyboardwhich allows any of the followingfunctions to be configured duringcommissioning:
Sensitivity to weight signal
Scale capacity
Number of divisions andincrement size
Weighing Unit
Zero / back balance
Decimal marker type - point orcomma
Position of decimal marker
Filtering parameters
Five points for linearitycorrection to ensure maximumaccuracy
Tare availability
Time and date
User-definable serial outputstrings
Grand total information
Scale ID number
I/O operation
All these characteristics arestored in non-volatile memory sothat once the ideal parameters forany given weighing system areestablished they can be retainedwith certainty for the future.
Once the scale is set up asrequired, a calibration report canbe printed showing weighingdetails (useful for the installationengineer). This allows the state ofthe system to be monitored.
One PLU is provided for simpletotalising and storage of user-defined parameters.
2
Avery Weigh-Tronix Technical SpecificationE1005
Applications
Parts CountingSimple counting mode.
Static CheckweighingSet limits, manually or by samplemode.
Peak HoldRecords maximum weightmeasured. Clear button resetsmemory.
TotalisingSingle totals channel.
Remote Display ModeConnect to, or use as a remotedisplay.
Specification
Electrical
Display
TypeLCD, reflective, 20 mmDisplays up to seven digits
Decimal PointsConfigurable to any of sixpositions.
Units Displayedkg, lb, custom.
AnnunciatorsBalance (Gross Zero)MotionGrossTareNetlb, kg, customUnder/Target/OverPrintThree Trip OutputsPeakBattery Status
Keypad
7 keys, addressing:Function KeyDedicated Function Keys:Zero, Tare, Select, Print, Units,On/Off
Load Cell Input
Maximum Load Cells if 350ΩFour
Connection of InputVia 9-way, D-type connector.
ExcitationDirect current
Voltage5 V dc
CurrentUp to 115 mA
Remote SenseObtained from excitation, orlinked directly to reference inputconnectors at the indicator
uV/ per Division0.5
ResolutionNon- Approved 100,000.Approved 6,000.
Calibration
Full digital multi-point (five point)calibration.
Theoretical calibration possible ifparameters known.
Increment Multiplier1, 2, 5, 10, 20, 50
Analogue to DigitalConvertor
Display Update Rate1, 2, 5, 10 per second.
A to D Rate50 per second.
A to D TypeDelta Sigma.
Filter
Selectable averaging: fast,medium and slow.
Balance/Zero
SettingKeyboard push button.
Size of Balance RangeNormally 10%, up to 100%.
Zero IndicationWithin 2% of maximum capacity.
Under Range IndicationDisplays “_ _ _ _ _ _”
Zero TrackingConfigurable.
Motion DetectionConfigurable.
Range/Span
Range of Adjustment0 - 100,000 divisions
Over Range IndicationDisplays “— — — — — —”
Tares
Push-Button (Semi Auto) TarePush-button operated, semi-automatic, with selectablenegative weight display.Cumulative taring is possible.
Initialisation and OperationWhen the item to tare on isapplied, press the ‘Tare’ push-button.
Indication‘Net’ annunciator is illuminated.
Avery Weigh-Tronix Technical Specification E1005
3
Trips
The indicator has three internalnon-sequencing trips as standard,logic level rated.
Using the external TIU3, thesewill switch mains voltage(240 V 2 A). Internal inputs arerated at logic levels.
The trips can be set to activate anoutput based on a given weighttarget.
All configuration information isretained when power is off.
Product Look Ups(PLUs) & Totals
Information Stored per PLUGrand Totals.
Maximum Capacity of PLU9,999,999.
Real Time Clock
The E1005 is fitted with a realtime clock which allows the userto display and print the time anddate. This clock is battery-backedand will remain functional in theabsence of mains power.
Communications
Serial InterfaceOne bi-directional asynchronousserial interface (RS232/485/422and RS232/20mA current loop) asstandard.
For comms to PC or printer,requires standard straight-throughcable.
Electrical Power Input
Voltage100 VAC - 230 VAC nominal,50/60 Hz.
ToleranceVoltage -15 to +10%Frequency ±10%.
Power Consumption20 VA maximum when used withfull configuration of load cells
Cable length2 m.
Power SupplyExternal linear plug type.
Battery OperationInternal battery provides on asingle charge:
25 hours on single load cell. 15 hours on four load cells.
Isolation ProtectionNone. Mains earth lead must beconnected to safety earth.
Environment
Resistance to Dirt and MoistureProtected to IP54, in mouldedABS enclosure.
Electrical DisturbanceImmune to electrical disturbance,including RFI as detailed inEN 45501:1992.
Operating Temperature-10° C to + 40° C
Service Temperature-10° C to + 55° C
Storage Temperature-40° C to +70° C
Finish
Enclosed in moulded ABS plasticcase.
Mounting Options
The indicator will desk, wall orpole mount.
Pole mounting requires optionaladapter.
Performance
Internal Resolution16,777,216
Self DiagnosticsDisplayKeysA2DSerial Test (1)Internal I/OExternal I/O
Approvals
All data relating to theperformance of the machinemeets and exceeds requirementsof EN 45501:1992 EuropeanApproval (‘E’ Approval) AccuracyClass III Machines andOIML 76-1. The type approvalcertificate numbers being:
EU -UK2723South Africa -New Zealand -Australia -OIML -R76/1992-GB1-
04.09NTEP -04-029
Factory Options
Choice of mains power connector:UK, Euro, Australian, SouthAfrican, American.
4
Avery Weigh-Tronix Technical SpecificationE1005
All dimensions in millimetres
DimensionsAccessories
1. Trips Interface Unit (TIU3)Provides three external mainsrated outputs in place of threeinternal logic level I/O included asstandard.E10100E00000000
2. 300 mm PoleStainless steel mounting pole withtop mounting plate for indicator.E11100U00000000
3. 1000 mm PoleStainless steel mounting pole withtop mounting plate for indicator.E11100V00000000
4. Interface Leads for Platformto IndicatorSee price list.
Weight
2.1 kg
Shipping Specification
Net2.1 kg
Gross3.6 kg
Measurement375 mm x 280 mm x 235 mm
Harmonised Commodity Code842390 00 0.
248
229
165
222
178
E1005/12.04/Issue 6
© Avery Berkel Limited 2004. All rights reserved. This publication is issued to provide outline information only which, unless agreed by Avery Berkel Limited in writing, may not be regarded as a representation relatingto the products or services concerned. Avery Berkel Limited reserves the right to alter without notice the specification, design, price or conditions of supply of any product or service.
Your local distributor:
Produced by Avery Weigh-Tronix Publicity Department
Foundry Lane, Smethwick,West Midlands, England B66 2LP.
Tel: +44 (0)870 90 34343 Fax: +44 (0)121-224 8183
E mail: [email protected]: http://www.averyweigh-tronix.com