INDUSTRIAL PRODUCTS

TaeguTec Ltd. acquired the standard for manufacturing and servicing of aerospace components.

TaeguTec has achieved the Quality Management System standard AS 9100 - the standard for manufacturing and servicing of aerospace components from DNV (DET NORSKE VERITAS).

AS 9100 is the only globally recognized standard for the aerospace industry and it has become the worldwide standard for the sector.

The quality management system requires a high degree of stability and reliability and TaeguTec meets the requirements of the standard with its high quality advanced technology production methods & systems.

TaeguTec Industrial Products2

15 page DIe & ANvIL /PUNCheS

16 - 17 pages CARbIDe RODS

18 - 19 pages WeAR PARTS

4 - 5 pages TUNGSTeN POWDeRS

6 - 14 pages CARbIDe ROLLS - TORQUE ROLL - BLOCK ROLL - TRI ROLL - QUADSLIT ROLL - CANTILEVER ROLL - COMPOSITE ROLL - TURBING ROLL - SECTION ROLL ROLL - GRADES

3Member IMC Group

TUNGSTeN MeTAL POWDeR TaeguTec has been producing high quality

tungsten metal powder with a variety of particle sizes for more than 30 years.

APPLICATIONTungsten Carbide Powder, Heavy Alloy, Electrical Contacts, Diamond Tools, Wires etc.

TUNGSTeN

TaeguTec Industrial Products4

TUNGSTeN CARbIDe POWDeR TaeguTec's premium quality tungsten carbide powder is produced by carburization

in a hydrogen atmosphere with a mixture of tungsten metal powder and pure carbon black.

RTP POWDeR TaeguTec supplies tailor-made RTP(Ready-to-press)

powder as per customer’s specification.

APPLICATIONCemented Tungsten Carbide Cutting Tools, Wear Parts, Roll & Die, Diamond Tools, Mining Tools etc.

5Member IMC Group

CARbIDe ROLLS

Free from slippage even under high rolling torque & low rolling speed. Flexible and optimal design for every requirement. Suitable for various applications from Finishing Block

to Intermediate Mill. Higher productivity with excellent surface finish of

final products through precise dimension control during rolling.

Minimizes downtime for roll changes.

Roll Size Groove Dimension RollingTorque(kg·m)

RollingSpeed(m/sec)

GradeOuter Diameter(Ømm)

barrel Length(mm) Type Width (mm)

350-500 500-900 OvalRound

50-8030-50 2,500-8,000 Min. 1.5 T30M, T30S

8000

07 78 89 910 10

7000

3.5

60003

50002.5

40002

3000 1.5

2000 1

0.51000

9000Kg·m m/s

Stand Stand

• Rolling Torque • Rolling Speed

6 TaeguTec Industrial Products

7

Available in several grades with high crack-resistance, anti-oxidation and wear-resistance. All types of grooves available.

- Wire Rod Mill: Pre-Finishing Mill (PFM), No Twist Mill (NTM) Reducing Sizing Mill (RSM), Pinch Roll- Rebar Mill: Finishing Block, Pinch Roll

Application

• Intermediate Mill to PFM

• NTM to RSM Roll Size Products Rolling

Speed(m/sec)

GradeOuter Diameter(Ømm)

Width(mm) Type Final Size

(Ømm)

208-212 60-72 OvalRound

5.5-1210-20 T20M, T20S, T17L

158.75-166 57.3-70 OvalRound 20-120 T15S, T14L, T11L

Roll Size Groove Dimension RollingTorque(kg·m)

RollingSpeed(m/sec)

GradeOuter Diameter(Ømm)

Width(mm) Type Width (mm)

330-450 100-130 OvalRound

30-8020-50 1,000-6,000 1.5-12 T30M, T30S

7Member IMC Group

TaeguTec Industrial Products

CARbIDe ROLLS

Available in various grades for high performance with high surface finish enabling defect-free finished production.

Stable & reliable clamping technology.

- Round Bar Mill: Reducing Sizing Block (RSB) for Round Bar

Roll Size Products RollingSpeed(m/sec)

GradeOuter Diameter(Ømm)

Width(mm) Type Final Size

(Ømm)

300-380 40-90 Oval,Round 16-42 10-20 T25H, T20M,T17L,T15M

- Wire Rod Mill: PFM for Wire Rod

Application

Roll Size Products RollingSpeed(m/sec)

GradeOuter Diameter(Ømm)

Width(mm) Type Final Size

(Ømm)

200-220 25 Oval,Round 5.5 5-20 T20M

Interference-Fit & boltingInterference-Fit type

8

Improved grades which eliminate chipping at the sharp edge of slitting. Superior quality / longer groove life than steel rolls. Composite Roll stable & reliable clamping technology.

- Rebar Mill: Slit stand for rebar (D8mm-D20mm)

Application

2 Slit 3 Slit 4 Slit 5 Slit

9Member IMC Group

CARbIDe ROLLS

- Wire Rod Mill & Rebar Mill: Intermediate Mill.

Application

Roll Size Products RollingTorque(kg•m)

RollingSpeed(m/sec)

GradeOuter Diameter(Ømm)

Width(mm) Type Width

(mm)

290-475 140-235 OvalRound

40-7020-40 1,000-4,000 3-10 T30M,T27M,T23L

Several grades available with excellent toughness for high rolling torque & low rolling speeds. Stable & reliable clamping technology.

Interference-Fit & boltingSide Key & bolting

TaeguTec Industrial Products10

Applicable to various rolling stands due to excellent & unique design. Stable & reliable clamping technology. Unique & flexible design for different requirements. Minimum downtime for roll changes due to longer groove life-cycle of carbide rolls. Easy to assemble & disassemble. Reduced mill downtime maximum productivity.

- Wire Rod Mill, Rebar Mill & Round Bar Mill: Finishing Mill for small size products.

Application

Roll Size Groove Dimension RollingTorque(kg•m)

RollingSpeed(m/sec)Outer Diameter

(Ømm)barrel length

(mm) Type Width(mm)

260-440 400-900

OvalRoundSquare

DogboneNotch

Less than40

(oval)Less than

30(Round)

Max 2,500 Min 3

Tungsten Carbide Ring

Spacer

hydraulicUnit

Clamping Ring

Nut

11Member IMC Group

CARbIDe ROLLS

Guarantees quality improvements with excellent surface finish.

hot Rolling Mill

Application: Stretch Reducing Mill (SRM) for seamless pipes & Straightener Roll

Application: Sizing pass for seam pipes.

Product Size

Roll SizeGrade RemarkOuter Diameter

(Ømm)Width(mm)

Ø50-Ø120mm 270-380 85-150 T20M, T30ST20H, T30H

3-Roll typeHot Rolling

Product Size

Roll SizeGrade RemarkOuter Diameter

(Ømm)Width(mm)

Ø20-Ø70mm 150-250 80-120 T14L 2-Roll typeCold Rolling

Cold Rolling Mill

Shrinkage-Fit & bolting

TaeguTec Industrial Products12

Application: Finishing Mill for Light Section Bar Mill (Angle Bar, Flat Bar).

Applicable to various rolling stands due to excellent & unique design. Stable & reliable clamping under working conditions of high rolling torque & load.

Item Product Size

Roll SizeGradeOuter Diameter

(Ømm)barrel Length

(mm)

Angle Bar AB25-AB65350-500 500-800

T19, T20MT25H, T30M, T30S

T23L, T27MFlat Bar 50-150

13Member IMC Group

GradeChemical Composition Physical Properties

ApplicationWC (%) Co (%) hardness

(hRA)TRS

(Kg/mm2)Density(g/cm3)

T06S 94 6 87.1-89.1 180 14.5-14.9 Finishing Block & RSM for Wire Rod

T10S 90 10 87.7-89.7 230 14.1-14.5 Finishing Block & RSM for Wire Rod

T15S 85 15 84.5-86.5 230 13.6-14.0 Finishing Block for Wire Rod & Round Bar

T20S 80 20 82.9-84.9 230 13.2-13.6 Finishing Block & IFM for Wire Rod

T25S 75 25 82.7-84.7 230 12.8-13.2 IFM for Wire Rod & Prefinishing for Deformed Bar

T30S 70 30 79.6-81.6 210 12.4-12.8 for Tube Mill Finishing for Deformed Bar

GradeChemical Composition Physical Properties

ApplicationWC (%) Co-Ni-Cr (%) hardness

(hRA)TRS

(Kg/mm2)Density(g/cm3)

T09L 91 9 87.0-89.0 230 14.4-14.8 Finishing Block & RSM for Wire Rod

T11L 89 11 85.9-87.9 230 14.2-14.6 Finishing Block & RSM for Wire Rod Al, Cu Rods

T14L 86 14 85.1-87.1 230 13.9-14.3 Finishing Block & RSM for Wire Rod Al, Cu Rods

T14M 86 14 84.8-86.8 210 13.9-14.3 Finishing Block & RSM for Wire Rod Al, Cu Rods

T15M 85 15 84.2-86.2 210 13.8-14.2 Finishing Block for Wire Rod & Round Bar

T16h 84 16 82.9-84.9 230 13.7-14.1 Finishing Block & Pinch Roll for Wire Rod

T17L 83 17 83.6-85.6 230 13.6-14.0 Finishing Block & Pinch Roll for Wire Rod

T19L 81 19 82.9-84.9 230 13.4-13.8 Finishing Block & IFM for Wire Rod

T20M 80 20 81.9-83.9 230 13.3-13.7 Finishing Block & IFM for Wire Rod

T20h 80 20 81.7-83.7 210 13.3-13.7 Finishing Block & IFM for Wire Rod

T23L 77 23 81.4-83.4 230 13.1-13.5 IFM for Wire Rod & Prefinishing for Deformed Bar

T25h 75 25 79.0-81.0 230 12.8-13.2 Prefinishing for Deformed Bar for Finishing

T27M 73 27 78.8-80.8 210 12.7-13.1 Prefinishing & Square groove for Deformed Bar

T30M 70 30 77.8-79.8 210 12.5-12.9 for Wire Rod Finishing & Dogbone groove for Deformed Bar

T30h 70 30 77.0-79.0 210 12.5-12.9 for Tube Mill Finishing for Deformed Bar

T31L 69 31 77.6-79.6 210 12.4-12.8 for Deformed Bar

T32L 68 32 76.5-78.5 210 12.3-12.7 Finishing & Dogbone groove for Deformed Bar

Multi-binder Grade

Single-binder Grade

CARbIDe ROLLS

TaeguTec Industrial Products14

TaeguTec Die & Anvil are used extensively in high pressure applications such as industrial synthetic diamond: CBN, PCD, PCBN, etc.

These high pressure tools are used in extreme environments of up to 50 kbar and at temperatures in excess of 1,400 degrees Celsius.

TaeguTec has exceeded our customers’ demands through our quality control system and innovative research and development.

Various grades are ready to serve customer requirements.

TaeguTec is a specialized supplier of high pressure hardmetal toolings.

DIe & ANvIL

15Member IMC Group

One hole straight coolant rods

Two hole and three hole30 degree coolant rods

Gun drill blanks

Two hole straight coolant rods

Two hole 40 degree coolant rods

RODS WITh COOLANT hOLe TaeguTec’s state-of-the-art extrusion technology makes

it possible to hold high accuracy and consistent quality of through coolant rods for hole making tools.

CARbIDe

16 TaeguTec Industrial Products

RODS WIThOUT COOLANT hOLe

Ball End Mill Blanks

Ground Long & Short RodsUnground Long & Short Rods

Step-formed & Chamfered

TaeguTec’s advanced sinter HIP process is suitable for all types of rods and enables them to have more stable and consistent quality.

17Member IMC Group

PReFORM Excellent deformation resistance due to

high compressive & impact strength.

APPLICATION• Stamping die & punch for lead frame, connector, switch and relay.

PLATe High cutting-edge strength & good wear resistance

by using fine & ultrafine WC. High deformation & deflection resistance.

CAN MAKING MOLD Excellent deformation resistance thanks to

high compressive strength.

APPLICATION• Stamping molds for 2-piece can and 3-piece cans• Stamping molds for aerosol cans

KNIFe

Slitting & Others

Longer tool life with high impact strength, high tensile strength & wear resistance.

WeAR

TaeguTec Industrial Products18

APPLICATION• Pin-chucks, guide rolls • Pins and jigs for heat treatment • Nozzles• Gate blocks for aluminum casting • Dies for hot extrusion and drawing

AS10 Silicon Nitride Ceramics High strength and fracture toughness. High hardness at elevated temperature. Excellent high-temperature strength.

APPLICATION• Mechanical seals, bearings • Parts for valves and pumps• Jigs for semiconductor equipment and furnace parts• Grit-blast nozzle liners • Various bulletproof products• Thermocouple protection tubes and high temperature liners (parts of waste incinerators)

AC10 Silicon Carbide Ceramics High wear resistance and corrosion resistance. Low thermal expansion coefficient and

friction coefficient.

APPLICATION• Magnetic heads for hard discs • Paper sliders• Parts requiring higher strength and hardness than alumina at room temperature

Ab30 Al2O3-TiC Ceramics High strength, hardness and fracture toughness. Low friction coefficient. Uniform performance and durability.

19Member IMC Group

World headquarters1040 Gachang-ro, Gachang-myeon,Dalseong-gun, Daegu 42936, KOREATel: 82-53-760-7666(Overseas), 82-53-760-7677(Local) Fax: +82-53-768-9912Web:http://www.taegutec.com

•English Version: IP 01/2017•©TaeguTec LTD.

English Version: IP 01/2017 ©TaeguTec LTD.