industrial range
TRANSCRIPT
Why Neumo...?NEUMO opens the door to 1800 tonnes of Stainless Steel products.
Our comprehensive stock range is carefully chosen to ensure NEUMO UK Ltd. can be your complete Stainless Steel logistics partner, designed specifi cally to satisfy the demands from the following industries:
• Wastewater, Water Treatment and Effl uent• Anaerobic Digestion and Biogas• Process Pipework and Fabrication• Food, Beverage and Dairy• Chemical• Pharmaceutical• Oil and Gas• Shop Fitting and Architectural... and many more that use our Stainless Steel product range.
With no minimum order level, customers have access to an unprecedented range of Tubular, Pipe, Bars and Sheet stock. Additionally, in excess of 6500 stock items of Fittings, Flanges and Valves are also available.
From stock held in Telford, Germany and Denmark we are sure we can meet your demands with service and quality at the very forefront of everything we offer.
Our dedicated and specialist sales team can be contacted directly as listed.
Metric Fitting
Metric Flanges
we are sure we can meet your demands with service and quality at the very forefront of everything we
Our dedicated and specialist sales team can be
Industrial Range
Type Dimensions Specifi cations QualitiesMetric Fittings 50 mm I/D - 500 mm I/D Bends - 1,5 d, D+100 304L/316L
Tees - Press, Pulled
Reducers - Ecc, Con
End Caps
Collars
Metric TubeType Dimensions Specifi cations QualitiesMetric Tube 50 mm I/D - 500 mm I/D Welded tubes, 304L/316L EN 10217-7, TC1
not annealed
Tol EN ISO 1127 D2/T2
3
Metric Fittings
Type Dimensions Specifi cations QualitiesMetric Flanges 50 mm I/D - 500 mm I/D PN10 / PN16 Mild Steel Reduced thickness Zinc Plate
Plate BS T “D“ Mild Steel Scotchkote P.P.A Grey
Metric Flanges
Industrial Range
ANSI Welded PipeType Dimensions Specifi cations Qualities
ANSI Welded Pipe ½" - 8" Nominal bore ASTM A312 304L/316L
Schedule 10s ANSI 36.19
Schedule 40s Welded
ANSI Welded FittingsType Dimensions Specifi cations Qualities
ANSI Welded Fittings ½" - 8" Nominal bore Bends 304L/316L
Schedule 10s Tees
Schedule 40s Reducers
End Caps
ASTM A403, dims. to
ANSI B16.9
Ball ValvesType Dimensions Specifi cations Qualities
Ball Valves ¼" - 3" 2 PCE, BSPT Ends - Full Bore 316
3 PCE, BSPT Ends - Full Bore 3 PCE, WELD - Full Bore
Industrial Range
5
ISO TubeType Dimensions Specifi cations Qualities
ISO Tube 60,3 mm o/d – Welded tubes 304L/316L 323,9 mm o/d EN 10217-7 TC1
1,6 mm – 3,0 mm acid proof wall thickness not annealed, pickled
Tol. EN ISO 1127 D2 / T3
ISO FittingsType Dimensions Specifi cations Qualities
ISO Fittings 60,3 mm o/d – Bends - 90° 316L/304L 323,9 mm o/d Tees - Pulled
1,6 mm – Reducers - Ecc / Con 3,0 mm wall thickness Pickled Finish
Ornamental TubeType Dimensions Specifi cations Qualities
Ornamental Tube ½" o/d - 2" o/d Welded ornamental tubes 304/316 ASTM A554/98
1,5 / 2,0 / 3,0 mm Bright Polish 600 grit wall thickness Dull Polish 320 grit
Industrial Range
Threaded FittingsType Type Specifi cations Qualities
Nipples Hose Adaptors Threaded Fittings 316
Hex Nipples Hex Plugs BSP 150 lb
Barrel Nipples Square Plugs BSP / NPT and Socket
Welding Nipples Caps Weld High Pressure
Sockets Unions 3000 lb / 6000 lb
Reducing Sockets Tee Pieces
Hex Reducers 90 deg Elbows
Hex Nuts 45 deg Elbows
Box TubesType Dimensions Specifi cations Qualities
Square and Rectangular 15 x 15 x 1,0 mm up to Square and Rectangular 304/316/430Decorative and 200 x 200 x 5,0 mm welded TubesStructural Tubes
Industrial Range
7
TubeType Dimensions Specifi cations Qualities
Handrail / Balustrade Tube 42,4 mm o/d x 2,0 mm Welded Tubes 304/316
42,4 mm o/d x 2,5 mm Dull Polish 240 grit
48,3 mm o/d x 2,0 mm Dull Polish 320 grit
48,3 mm o/d x 2,5 mm
Flat productType Dimensions Specifi cations Qualities
Cold Rolled Sheet Width Cold rolled sheets 304L/316L 1000 / 1250 / 1500 / 2000 acid proof Length annealed and pickled 2000 / 2500 / 3000 / 4000 EN ISO 9445 thickness EN 10088-2 / EN 10028-7 0,71 mm - 8 mm Dull Polish 240 grit 2B
Long productsType Dimensions Specifi cations Qualities
Round Bars Dia Bar 3 mm - 500 mm Most type and tolerences 303/304/316
Flat Bars Flat Bar 3 mm - 12 mm Slit and Edge rolled 304L/316L
Angle Bars Angle 15 mm - 100 mm Annealed and Pickled 304/316L
Industrial Range
NEUMO Budapest Kft. (Hungary)
NEUMO Mühendislik ve (Turkey)
EGMO Ltd. (Israel)
NEUMO Representative Offices Vietnam
NEUMO VARGUS (China)
Armaturenwerk Hötensleben GmbH (Germany)
AWH Vienna (Austria)
AWH Lyon (France)
Gebr. Rieger GmbH & Co. KG (Germany)
NEUMO GmbH & Co. KG (Germany)
Damstahl GmbH & Co. KG (Germany)
NEUMO UK Ltd. (United Kingdom)
VNE Corporation (USA)
Damstahl AG (Switzerland)
Herrli AG (Switzerland)
NEUMO-EGMO Spain SL (Spain)
NEUMO Polska Sp. z.o.o. (Poland)
NEUMO GUS (Russia)
Damstahl AB (Sweden)
Damstahl a/s (Denmark)
Damstahl a/s (Norway)
NEUMO GUS Kransodar (Russia)
NEUMO-Ehrenberg-Gruop
NEUMO UK Ltd.Halesfield 4TelfordShropshire TF7 4APTel.: +44 1952 583999Fax: +44 1952 583958e-mail: [email protected]://www.neumo.co.uk