TSS-450Owner’s Guide

(230V)

TOTAL SPEAKER SOLUTIONS

EN

GL

ISH

INFINITY Harman Consumer Group International

TSS450/230

n

f

eg

l

dm

c

b

k

n

hm

h

qcr l

r

q

op

k

po

a

Apvd.By

Treatment處理Weight重量單位 Unit

Engineer工程

Taiwan Meiloon台灣美隆

m/m

東莞美信Design Source

Dongguan Meisin

製圖Dsgn By設計

設計地東莞美隆

Dongguan Meiloon

承認Drawn By

Suzhou Meishing蘇州美興

Maker材質MEILOON INDUSTRIAL CO., LTD.

DRW. NO.

PART NAME

品號PART NO.

品名

Scale

圖號

比例 Material廠商SheetSize

INFINITY Harman Consumer Group International

TSS450/230

Infinity Total SolutionsInfinity Total Solutions continues Infinity’s longstanding commitment to accurate sound reproduction. Our high-qualitydrivers, precision dividing networks and rigid, well-bracedenclosures combine to deliver uncompromised performance in anymultichannel home theater system.In addition, these speakers, except for the powered subwoofer, aremagnetically shielded for safe placement adjacent to a television.

Unpacking the SystemCarefully unpack the system. If you suspect damage from transit, report it immediately to your dealer and/or delivery service. Keep the shipping carton and packing materials for futureuse. Open the package and verify the following contents:

• Warranty statement

INTRODUCTION

1 TSS-450

Before deciding where to best place your speakers, survey your roomand study Figures 1 and 2.

Figure 1. In this overhead view of a typical installation, satellitespeakers are used to reproduce sound for the front and surroundchannels.The center channel reproduces sound and dialogue.Thepowered subwoofer provides bass for effects and music.

Figure 2.This figure shows an alternative layout, which may bemore suitable for some rooms.

Couch

LeftFrontChannel

LeftSurroundChannel

RightSurroundChannel

RightFrontChannel

CenterChannel

Subwoofer

Couch

LeftFront

Channel

LeftSurroundChannel

RightSurroundChannel

RightFrontChannelCenter

Channel

Subwoofer

PLANNING YOUR SYSTEM

(1) Subwoofer

(1) Center with base

(4) Satellite speakers

(4) Wall brackets for satellites

• Wire packageContains:2 x 12m (2 x 40') Speaker wire3 x 6m (3 x 15') Speaker wire1 x 4.5m (1 x 15') Subwoofer cable

INFINITY Harman Consumer Group International

TSS450/230

2TSS-450

The TSS-450 satellites are designed to be mounted on the wall.There is a wall bracket for each satellite speaker.Each speaker bracket will require (4) 1-1/2," #10 wood screws;each screw should be fastened to a wall stud. If a wall stud isunavailable, install an anchor appropriate for a 1-1/2," #10screw.

NOTE: The customer is responsible for the correct selection and use of mounting hardware (available through hardware stores)that will ensure the proper and safe wall-mounting of the speakers.

Step 1.Mark the positions on the wall where you would like to place themounting screws.

Step 2.Place bracket against wall and fasten four 1-1/2," #10 woodscrews through the bracket’s screw holes into the wall. If a wallstud is not available, use an appropriate anchor.

Step 3.Screw the post of the bracket into the 1/4"-20 threaded insert onthe back of the satellite.Adjust the satellite to the desired angleand tighten the knob using the enclosed metal bar.

Left and Right Front ChannelsFor left and right front channels, place one satellite to the left andanother to the right of the television, as shown in Figure 1.Since the speakers are magnetically shielded, you can place themvery close to the TV without worrying about the magnetic field distorting the picture.

Center ChannelFor the center channel, place the speaker directly on top of, orbelow, your television. Use a shelf if the television does not providea stable platform.The center channel includes an adjustable rear foot. Simply turnthe foot to extend the length.This will allow you, if necessary, to aimthe speaker downward slightly, toward the listening area.

Surround ChannelsFor left and right surround channels, place one speaker on the leftand another on the right, to the side of or slightly behind the listening area.The surround speakers should be mounted at aheight of between 1.2 and 2 meters.

SubwooferSince the installation of a subwoofer can be somewhat more complicated than installing full-range speakers, it is essential thatyou read this section very carefully prior to connecting the subwoofer to your system. Should you have questions relating toinstallation, it is advisable to call either your dealer or Infinity’sCustomer Service Department for advice.

The performance of the subwoofer is directly related to its placement in the listening room and how you align the subwooferwith the satellite speakers. Setting the volume of the subwoofer in relation to the left and right speakers is also of criticalimportance because it is essential that the subwoofer integratesmoothly with the entire system. Setting the subwoofer’s volumelevel too high will result in an overpowering, boomy bass. Settingthe volume level too low will negate the benefits of the subwoofer.

Here are several additional facts on installation that may proveuseful. It is generally believed that low frequencies (below 125Hz)are nondirectional and, therefore, placement of a subwoofer withinany listening room is not critical.While in theory it is true that thelarger wavelengths of extremely low frequencies are basicallynondirectional, the fact is that, when installing a subwoofer withinthe limited confines of a room, reflections, standing waves andabsorptions generated within the room will strongly influence theperformance of any subwoofer system.As a result, specific location of the subwoofer becomes important, and we strongly recommend that you experiment with placement before choosing afinal location. Placement will depend upon your room (for example,whether or not your room permits placement of the subwoofer neareither satellite) and the amount and quality of bass required.

PLACEMENT WALL-MOUNTING THE SATELLITES

NOTE: The satellite speakers can be placed directly on a shelf,or mounted on a wall using the wall brackets included.

Figure 3.screwhead on the wa

properly, the speaker should slide down ssecure.

Metal bar

Bracket on wall.

EN

GL

ISH

INFINITY Harman Consumer Group International

TSS450/230

4TSS-450

A Few SuggestionsWe recommend that you do not operate your speakers or subwooferwith the bass, treble and loudness controls set to full boost.This will place undue strain on your electronics and speakers andcould damage them.

The volume control setting on your processor/preamp or receiver is not a specific indication of the overall loudness level of thespeakers.The only important consideration is the loudness level at which the system can be played, regardless of where the volumecontrol is set.

Always turn down the volume control setting on your processor/preamp or receiver when changing a cassette or CD, or switchinginputs to AM or FM operation. Excessively loud transients (clicks orpopping sounds) can damage the satellite speakers and possibly thesubwoofer.

Important!Whenever changing cables, pulling plugs, etc.,ALWAYS TURN OFFALL EQUIPMENT, including the subwoofer.

SUBWOOFER CONTROLS

Rear Panel

HIGH Level Inputs

LFE Input

Line-Level Inputs

AUTO/ON Switch

Subwoofer Level Control

Power Switch

EN

GL

ISH

INFINITY Harman Consumer Group International

TSS450/230

5 TSS-450

SUBWOOFER CONNECTIONS

If your receiver/processor does not contain a Dolby Digital or DTS processor but has asubwoofer output:

If your receiver/processor does not havesubwoofer outputs for the left and right channelsor an LFE output:

If you have a Dolby* Digital or DTS® receiver/processor with a low-frequency-effects (LFE) or subwoofer output:

Set NORMAL/LFE switch to “LFE.”

Set NORMAL/LFE switch to “NORMAL.”NOTE: If your receiver/processor has only one sub out,you may use either the L or R input.

Receiver/AmplifierFront Speaker Output

INFINITY Harman Consumer Group International

TSS450/230

6

OPERATION

Surround ModesWhen using the TSS-450 in a Dolby* Digital or DTS home theatersystem, make sure all speakers are set to “Small” .When using thesystem in a Dolby Pro Logic* home theater system, make sure thereceiver’s center channel mode is set to “Normal.”

Some Dolby Digital-equipped receivers/processors offer differentsetup options for each source or surround mode, e.g., CD-stereo,videotape, Dolby, Pro Logic. In each case, follow your equipment’sinstructions to ensure that the subwoofer output is turned on andthat the speakers are set to “Small” in each mode.

If your receiver has adjustable crossover settings, we recommendthe subwoofer crossover be set between 100Hz – 120Hz.

Power OnPlug your subwoofer’s AC cord into a wall outlet. Do not use the outletson the back of the receiver.

Initially set the Subwoofer Level Control to the“MIN”position.

Turn on the subwoofer by pressing the Power Switch on the rear panel.

Turn on your entire audio system and start a CD or movie sound-track at a moderate level.

Auto On/Stand-ByWith the Power Switch in the AUTO position, the LED on the rearpanel will remain lit in red or green to indicate the On/Stand-Bymode of the subwoofer.

RED = STAND-BY (No signal detected,Amp Off)

GREEN = ON (Signal detected,Amp On)

The subwoofer will automatically enter the Stand-By mode afterapproximately 10 minutes when no signal is detected from yoursystem.The subwoofer will then power ON instantly when a signal is detected. During periods of normal use, the Power Switch can be left on.You may turn off the Power Switch for extendedperiods of nonoperation, e.g., when you are away on vacation.

Adjust LevelTurn the Subwoofer Level Control up about half way. If no soundemanates from the subwoofer, check the AC-line cord and inputcables.Are the connectors on the cables making proper contact? Isthe AC plug connected to a “live”receptacle? Has the Power Switch been pressed to the “On”position? Once you have confirmedthat the subwoofer is active, proceed by playing a CD or DVD.Use a selection that has ample bass information.

Set the overall volume control of the receiver/processor to a comfortable level.Adjust the Subwoofer Level Control until you obtain a pleasing blend of bass. Bass response should notoverpower the room but rather be adjusted so there is a harmoniousblend across the entire musical range. Many users have a tendencyto set the subwoofer volume too loud, adhering to the belief that asubwoofer is there to produce lots of bass.This is not entirely true.Asubwoofer is there to enhance bass, extending the response of theentire system so the bass can be felt as well as heard. However,overall balance must be maintained or the music will not soundnatural.An experienced listener will set the volume of the subwooferso its impact on bass response is always there but never obtrusive.

TSS-450

Final PositioningAfter correctly connecting the TSS-450 system and verifying thatboth the subwoofer and all satellite speakers are playing, it is timeto optimize the system for your particular listening room. Earlier,you placed the subwoofer in its general location. Finding the exactlocation for optimum performance sometimes only involves movingthe speakers up to a few centimeters in any direction.We urge you,therefore, to experiment with placement, if possible, until yourspeakers deliver their full potential.

MAINTENANCE AND SERVICEThe satellite and subwoofer enclosures may be cleaned using asoft cloth to remove fingerprints or to wipe off dust.

All wiring connections should be inspected and cleaned or remadeperiodically.The frequency of maintenance depends on the metalsinvolved in the connections, atmospheric conditions, and other factors, but once per year is the minimum.

If a problem occurs, make sure that all connections are properlymade and clean. If a problem exists in one loudspeaker, reverse theconnection wires to the left and right system. If the problemremains in the same speaker, then the fault is with the loud-speaker. If the problem appears in the opposite speaker, the causeis in another component or cable. In the event that your TSS-450ever needs service, contact your local Infinity dealer or Infinitydirectly at www.infinitysystems.com for a service center near you.

EN

GL

ISH

INFINITYHarman Consumer Group International

TSS450/230

7 TSS-450

TSS-450

Satellites Center ChannelFrequency Range: 150Hz – 20,000Hz (±3dB) 150Hz – 20,000Hz (±3dB)

RecommendedAmplifier Power Range: 10 – 100 watts 10 – 125 watts

Sensitivity: 88dB 89dB(2.83V @ 1 meter)

Nominal Impedance: 8Ω 8Ω

Crossover Frequency: 7000Hz 7000Hz

Midrange Driver(s): 63mm (2-1/2") MMD, Dual 63mm (2-1/2") MMD,magnetically shielded magnetically shielded

High-Frequency Driver: 13mm (1/2") MMD, 13mm (1/2") MMD,magnetically shielded magnetically shielded

Dimensions (H x W x D): 127mm x 88mm x 88mm 88mm x 203mm x 88mm(5" x 3-1/2" x 3-1/2") (3-1/2" x 8" x 3-1/2")

Weight: 0.5kg (1.2 lb) 0.9kg (1.9 lb)

Powered SubwooferFrequency Range: 39Hz – 150Hz (±3dB)

Amplifier Output: 100 watts RMS

Low-Frequency Driver: 200mm (8") MMD

Crossover Frequency: 120Hz, 24dB/octave (LFE/Normal switch in Normal position)

Dimensions (H x W x D): 413mm x 262mm x 394mm(16-1/4" x 10-1/4" x 15-1/4")

Weight: 12.9kg (28.3 lb)

Infinity continually strives to update and improve existing products, as well as create new ones.The specifications and construction details in this and related Infinity publications are therefore subject to change without notice.

SPECIFICATIONSINFINITY

Harman Consumer Group International

TSS450/230

Model name: TSS-450PLT/230 (INFINITY PLATINUM HOME CINEMA)No. Part number Description Q'ty01 TSS-450PLT/230CA 4PCS/SAT+1PCS*CENTER 1PC02 TSS-450PLT/230SUB 8" 4 OHM WOOFER+AMP BOX 1PC03 406-000-05092 O/M TSS-450PLT/230&TSS-450CHR/230 1PC04 402-000-01816 Gift box TSS-450(230V)SYSTEMPLATINUM 1PC05 413-000-00670 label made in TSS-450 CHR;PLT 1PC

Model name: TSS-450PLT/230 CANo. Part number Description Q'ty01 TSS-450PLT/230SAT 2" WOOFER+TW 4 OHM BOX. 4PCS02 TSS-450PLT/230CEN 2*2"WOOFER+TW 4 OHM BOX 1PC03 431-000-01039 EPS Polyform TSS-450CHR/CA;PLT/CA 1PC04 370-000-00276G PE+PVC+CU wire bag40AWG#18-30 2PCS05 370-000-00277G PE+PVC+CU wire bag 20AWG#18-30 3PCS06 370-000-00273 PE+PVC+CU wire bag 1PCS RCA 1PC07 398-ABS-00303S ABS ball bracket Sφ15*43 silver 4PCS08 399-FE-00630 FE iron barφ4.5mm*100mm BLACK 1PC09 398-ABS-00317-0LA ABS plastic assemble 65*35.5H silver 1PC10 400-000-04714 master cartonTSS-450CHR/CA;PLT/CA 1PC

Model name: TSS-450PLT/230 SATNo. Part number Description Q'ty01 306-ABS-00719S ABS back cover plastic116.5*88*70.3H silver 1PC02 303-ABS-00172S ABS top cover 88*88*11.8T silver 1PC03 304-ABS-00177S ABS bottom 88*88*16.5T silver 1PC04 215-000-00547 terminal 1PC05 22PF48JA-DW07 2" 19MM 4OHM(1.9+1.3)OZ 1PC06 013-7500-00794 X-over INFINITY TSS-450 SAT 1PC07 11DM13NG-DT01 13MM DOME TWEETER 4OHM 1PC08 328-SPG-00028 Absortion material white 76*76*20T 1PC09 213-020-00516W ABS plastic 68*68*2.95T 1PC10 352-BM04018D621 FE screw T4*18 6PCS11 320-RUB-00053 Rubber foot 11φ 3PCS12 329-020-00735S FE iron grille 113.5*74*12.5T silver 1PC13 410-000-02687 PAP model label TSS-450PLT SAT 1PC14 423-000-00364 PE bag TSS-SAT450CHR;PLT 1PC15 411-000-01703 PAT serial label TSS450-PLT/230 SAT 1PC16 352-AM03008D035 screw 3*8 2PCS17 316-ABS-00547 ABS logo 26.38*6.1 1PC18 375-000-00016 Black glue to iron grille 2.0*5mm 4PCS

INFINITY Harman Consumer Group International

TSS450/230

b

Model name: TSS-450PLT/230 CENNo. Part number Description Q'ty01 306-ABS-00720S ABS back cover 190*88*70.3H silver 1PC02 303-ABS-00179S ABS top cover 88*88*11.8T silver 2PCS03 215-000-00547 screw 1PC04 22PF48JA-HW05 2" 19MM 8OHM (1.9+1.3)OZ 2PCS05 19DM13NG-DT01 13MM DOME TWEETER 4OHM 1PC06 013-7500-00793 x-over INFINITY TSS-450 CENTER 1PC07 328-SPG-00028 Absortion material white 76*76*20T 1PC08 213-020-00516W ABS glue ring 68*68*2.95T 2PCS09 352-BM04018D621 FE screwT4*18 8PCS10 320-RUB-00053 rubber foot 11φ 2PCS11 351-GM04025A466 screw bracket black M4*22 RUBBER HEAD 1PC12 329-020-00734S FE iron grille187*74*12.3T silver 1PC13 410-000-02689 PAP model label TSS-450PLT CEN 1PC14 423-000-00365 PE bag TSS-450PLT CEN;CHR CEN 1PC15 411-000-01705 PAP serial label TSS450-PLT/230 CEN 1PC16 352-AM03008D035 screw 3*8 2PCS17 316-ABS-00547 ABS logo 26.38*6.1 1PC18 375-000-00016 black glue to iron grille 2.0*5mm 4PCS

Model name: TSS-450PLT/230 SUBNo. Part number Description Q'ty01 241-080-00601S WOD+ABS cabinet+ silver front baffle+LED+port+a 1PC02 010-7510-00370 Amp INFINITY 100W TSS-450PLT 230V 1PC03 20MF10DAG-DW01 8" 35MM 4OHM (17+12)OZ 1PC04 329-080-00736S FE iron grille φ215*18H silver 1PC05 352-AM04020D210 screw t4*20 10PCS06 320-RUB-00199 RUB Rubber foot 2.5T φ7 70degree 4PCS07 320-ABS-00195 ABS foot support φ26*19.97 4PCS08 352-CM04025D604 FE screw T4*25 4PCS09 423-000-00366 PE bag TSS-450CHR SUB;PLT SUB 1PC10 411-000-01704 PAP serial labelTSS450-PLT/230 SUB 1PC11 431-000-01026 EPE polyform TSS-450CHR SUB;PLTSUB 1PC12 352-FM04020D605 FE screw T4*20 8PCS13 423-000-00007 plastic bag 8"*9"*0.02t 1PC14 411-000-05318 PAP TSS-450PLT/230 SUB silver 1PC

INFINITY Harman Consumer Group International

TSS450/230

Model name: 010-7510-00370 (AMP INFINITY 100W TSS-450PLT/230)No. Part number Description Referance Q'ty01 051-A00368A PCB ASS'Y OF TSS-450 1PC02 351-AM03008A079 Screw M3*8 black 6PCS03 351-BM03012A088 Screw M3*12 1PC04 351-HM04016A218 Screw M4*16 black 4PCS05 354-GM04002 Screw with screw plate M4 4PCS06 352-AM03008D040 Screw 3*8 type B black 8PCS07 352-AM03010D065 Screw 3*10 type P black 4PCS08 350-EM04012D024 Screw 4*12 black 4PCS09 150-e8604106 Transformer EI-86 230V/50Hz 1PC10 152-v602026 Power code SP-021A 6FT VDE 1PC11 154-v12506t0 Fuse TSD 1.25A 250V VDE 1PC12 155-520020 Fuse holder R3-11 1PC13 162-10082007 Wire red 18AWG 80mm 1PC14 162-a040d001 Speaker wire #1015 400mm 1PC15 163-11009 Transparent bind-up wire 100mm 2PCS16 176-wjce1 Closing terminal CE-1 1PC17 180-pbr12c11s Power switch PUSH BR12C11S 1PC18 193-2m1813 Piezo TO-220 18*13mm 2PCS19 302-AL-00226-0VE Alu. panel 215*270*2.5t 1PC20 361-FE-00004 IC HOLDER 26.9*12*1.4T 1PC21 323-AL-00108 HEAT SINK 117.5*60*25 1PC22 311-ABS-00028 Plastic knob 46077-W P.V.C. 1PC23 306-ABS-00714 Plastic rear cover 268*213*102 1PC24 335-NYL-00002 Power wire fastening 4K-4 NO-BB 2PCS25 333-EVA-00096 EVA caution 213*15*2.0mm 2PCS26 333-EVA-00097 EVA caution 213*15*1.0t 2PCS27 333-EVA-00132 EVA caution 238*15*2.0mm 2PCS28 333-EVA-00133 EVA caution 238*15*1.0t 2PCS29 333-EVA-00220 EVA caution 225*15*1t UL 1PC30 320-RUB-00033 Rubber sheet 25*21*4t 4PCS31 362-FE-00013 PCB holder L TYPE t=1.6mmS.P.C.C 2PCS32 333-EVA-00188 EVA caution 170x5x1t 1PC33 413-000-00188 Speaker lable 4 OHM 45*8mm 1PC34 413-000-00540 Label of MADE IN CHINA 1PC

INFINITY Harman Consumer Group International

TSS450/230

Model name: 051-A00368A PCB ASS'Y OF TSS-450 No. Part number Description Referance Q'ty01 052-A00368A AI PCB ASS'Y OF TSS-450 1PC04 110-10821jk2 Resistor 820Ω 1W ±5% 1PC05 110-122r2j15 Resistor 2.2Ω 1/2W ±5% R127 1PC06 113-500r1j10 Resistor 0.1Ω 5W ±5% R121,122 2PCS07 114-03302m0 Resistor 3K 0.3W ±20% R138 1PC08 115-h503a101 Resistor D16 50K/1 A VR201 1PC09 135-4478m35 Capacitor 4700uF 35V ±20% C121,122 2PCS10 135-4478m50 Capacitor 4700uF 50V ±20% C133,134 2PCS12 162-10202001 Wire 26AWG 1007 200mm RED 1PC13 162-50332003 2PIN 330mm RED D209 1PC14 171-udhss124d Relay 5A 24V UDH-SS124D RY101 1PC15 174-0rcb202v RCA JACK RCB-202V JK202 1PC16 174-0rca108nb RCA JACK RCA108NB 1P 1PC17 174-2rsp108v 8 PIN speaker terminal RSP-108V JK201 1PC18 175-1c07v01 Connector 7PIN PITCH=2.5mm P101 1PC19 175-1d02v01 Connector 2PIN PITCH=3.96mm P102 1PC20 175-1d05v01 Connector 5PIN 3.96mm P103 1PC21 180-tms7210v SWITCH SLIDE 6PIN MS7210V SW201 1PC22 190-06m4558d I.C. OPA 4558D U101,203 2PCS23 190-16tl074cn I.C TL074CN ST U201,202 2PCS24 192-027c1815gr Transistor 2SC1815GR TAP Q101,115 2PCS25 192-991d669a Transistor HI-SINCERITY HSD669A Q106 1PC26 192-021tip35c Transistor TIP35C Q107 1PC27 192-992b649t Transistor HSB649T Q105 1PC28 192-022tip36c Transistor TIP36C Q108 1PC29 192-161tip41c Transistor TIP41C NPN SGS Q124 1PC30 192-162tip42c Transistor TIP42C PNP SGS Q120 1PC31 192-201d882y Transistor KSD882Y Q117 1PC32 192-202b772y Transistor KSB772Y Q119 1PC33 193-3m2520 Piezo TO-3P 25x20mm Q107,108 2PCS34 197-00kbl405 Bridge recitifier 4A 500V KBL405 D110,115 2PCS35 197-101n4002 Diode 1N4002 D104 1PC36 197-101n5402 Diode 1N5402 D111,112 1PC37 361-FE-00051 Transistor holder 14.2*8.0*5.2t=1.6mm 1PC39 361-NYL-00054 Diode insulated sheet (SW06002) 2PCS40 051-A00014B PCB ASS'Y OF SCS135 LIMITER 1PC

INFINITY Harman Consumer Group International

TSS450/230

6

14

8

8

01

0

2

7

Model name: 052-A00368A AI PCB ASS'Y OF TSS-450 No. Part number Description Referance Q'ty02 110-14122j26 Resistor 1.2K 1/4W ±5% CF R265 1PC03 110-14472j26 Resistor 4.7K 1/4W ±5% CF 26mmTAP R201,202 2PCS04 110-14560j26 Resistor 56Ω 1/4W ±5% CF 26mmTAP R117 1PC05 110-16101j26 Resistor 100Ω 1/6W ±5% CF 26mmTAP R120,213,214,215 4PCS06 110-16102j26 Resistor 1K 1/6W ±5% CF 26mm TAP R124,166,254,264 4PCS07 110-16103j26 Resistor 10K 1/6W ±5% CF 26mm TAP R133,134,209,212,21 18PCS08 110-16104j26 Resistor 100K 1/6W ±5% CF 26mmTAP R163,164,231 3PCS09 110-16105j26 Resistor 1M 1/6W ±5% CF 26mm TAP R143,259 2PCS10 110-16123j26 Resistor 12K 1/6W ±5% CF 26mm TAP R135,139,165 3PCS11 110-16124j26 Resistor 120K 1/6W ±5% CF 26mmTAP R233 1PC12 110-16151j26 Resistor 150Ω 1/6W ±5% CF 26mmTAP R253 1PC13 110-16152j26 Resistor 1.5K 1/6W ±5% CF 26mmTAP R103,123,136,137,14 7PCS14 110-16153j26 Resistor 15K 1/6W ±5% CF 26mm TAP R118,145,152,154,23 5PCS15 110-16154j26 Resistor 150K 1/6W ±5% CF 26mmTAP R131,252 2PCS16 110-16181j26 Resistor 180Ω 1/6W ±5% CF 26mmTAP R111,114 2PCS17 110-16183j26 Resistor 18K 1/6W ±5% CF 26mm TAP R227 1PC18 110-16223j26 Resistor 22K 1/6W ±5% CF 26mmTAP R128,129,155,156,15 12PCS19 110-16273j26 Resistor 27K 1/6W ±5% CF 26mmTAP R223 1PC20 110-16205j26 Resistor 2M 1/6W ±5% CF 26mm TAP R257 1PC21 110-16332j26 Resistor 3.3K 1/6W ±5% CF 26mmTAP R106,107,144,236,25 5PCS22 110-16392j26 Resistor 3.9K 1/6W ±5% CF 26mmTAP R105,108 2PCS23 110-16393j26 Resistor 39K 1/6W ±5% CF 26mm TAP R126 1PC24 110-16470j26 Resistor 47Ω 1/6W ±5% CF 26mmTAP R112,113,115,116 4PCS25 110-16471j26 Resistor 470Ω 1/6W ±5% CF 26mmTAP R140,161,162 3PCS26 110-16472j26 Resistor 4.7K 1/6W ±5% CF 26mmTAP R110,125,130,147,15 9PCS27 110-16473j26 Resistor 47K 1/6W ±5% CF 26mm TAP R101,219,249,250,25 5PCS28 110-16512j26 Resistor 5.1K 1/6W ±5% CF 26mmTAP R210,221 2PCS29 110-16513j26 Resistor 51K 1/6W ±5% CF 26mm TAP R224 1PC30 110-16563j26 Resistor 56K 1/6W ±5% CF 26mm TAP R104 1PC31 110-16681j26 Resistor 680Ω 1/6W ±5% CF 26mmTAP R148,151 2PCS32 110-16682j26 Resistor 6.8K 1/6W ±5% CF 26mmTAP R109 1PC33 110-16913j26 Resistor 91K 1/6W ±5% CF 26mm TAP R203-206 4PCS34 130-sl101k503 Capacitor 100P 50V SL ±10% TAP C139,140,207,214,22 5PCS35 130-2b102k503 Capacitor 1000P 50V ±10% TAP C116,141,203 3PCS36 130-2b221k503 Capacitor 220P 50V ±10% TAP C204,205,210,211,21 6PCS37 130-2b681k503 Capacitor 680P 50V ±10% TAP C208 1PC38 130-3f104z503 Capacitor 0.1U 50V +80/-20% TAP C108,113,115,119,13 13PCS39 130-3f473m503 Capacitor 0.047U 50V ±20% TAP C106,209 2PCS40 130-sl470k503 Capacitor 47P 50V ±10% TAP C229 1PC41 32-103j503 Capacitor 0.01U 50V ±5% TAP C223,224 2PCS

INFINITY Harman Consumer Group International

TSS450/230

94

3

Model name: 052-A00368A AI PCB ASS'Y OF TSS-450 No. Part number Description Referance Q'ty42 132-104j503 Capacitor 0.1U 50V ±5% TAP C107,218,221,222 4PCS43 132-223ja03 Capacitor 0.022uF 100V ±5% TAP C123-128,131,132,2159PCS44 132-473j503 Capacitor 0.047U 50V ±5% TAP C216,217 2PCS45 135-3105m50 Capacitor1U 50V ±20% TAP C105,112,228 3PCS46 135-3106m50 Capacitor10uF 50V ±20% TAP C201,202,206,213,21 6PCS47 135-3107m16 Capacitor100uF 16V ±20% TAP C109,110,117,120,23 7PCS48 135-3107m50 Capacitor100U 50V ±20% TAP C135,136 2PCS49 135-3226m50 Capacitor 22U 50V ±20% TAP C114,118,225 3PCS50 135-3227m10 Capacitor220U 10V ±20% TAP C129,130, 2PCS51 135-3227m16 Capacitor 220U 16V ±20% TAP C111,233 2PCS52 135-3476m25 Capacitor 47U 25V ±20% TAP C103 1PC53 192-027c1815gr Transistor 2SC1815GR TAP Q102,111,112,113,11810PCS54 192-027c2235y Transistor 2SC2235Y TAP Q121 1PC55 192-028a1015gr Transistor 2SA1015GR TAP Q114,116,122,127 4PCS56 192-028a965y Transistor 2SA965Y TAP Q125 1PC57 192-1572n5551 Transistor FSC 2N5551 TAP Q103,109 2PCS58 192-1582n5401 Transistor FSC 2N5401 AI-PNP Q104,110 2PCS59 197-031n4148 Diode 100mA 75V SIGNAL D101,103,105,108,11 19PCS60 199-15000335 Diode 3.3V 1/2W 52mm TAP D102,205 2PCS61 199-15000625 Diode 6.2V 1/2W 52mm TAP D106,107 2PCS62 199-15001605 Diode 6V 1/2W 52mm TAP D109 1PC

Model name: 051-A00014B PCB ASS'Y OF SCS135 LIMITER No. Part number Description Referance Q'ty01 052-A00014B AI ASS'Y OF LIMITER 1PC02 162-50129001 CABLE ASS'Y 120mm AWG28WHT 1PC03 175-9f40hr2 Connector 40PIN PITCH=2.54mmHR2*40 0.15PC04 190-16tl074cn I.C TL074CN ST U301,FS101 1PC05 162-10059001 Wire 50mm WHITE UL1007 AWG266:6 SW101 1PC

Model name: 052-A00014B AI ASS'Y OF LIMITER No. Part number Description Referance Q'ty02 110-16103j26 Resistor 10K 1/6W ±5% CF 26mm TAP R301,R303,R304,R30 6PCS03 110-16223j26 Resistor 22K 1/6W ±5% CF 26mmTAP R310,312 2PCS04 110-16333j26 Resistor 33K 1/6W ±5% CF 26mmTAP R305 1PC05 110-16474j26 Resistor 470K 1/6W ±5% CF 26mmTAP R307 1PC06 110-16751j26 Resistor 750Ω 1/6W ±5% CF 26mmTAP R311,313 2PCS07 110-16755j26 Resistor 7.5M 1/6W ±5% CF 26mmTAP R306 1PC08 130-3f104z503 Capacitor 0.1U 50V +80/-20% TAP C305,306 2PCS09 132-103j503 Capacitor 0.01U 50V ±5% TAP C302,303 2PCS10 135-3226m50 Capacitor22U 50V ±20% TAP C301 1PC11 135-3476m25 Capacitor 47U 25V ±20% TAP C304 1PC12 192-027c1815gr Transistor 2SC1815GR TAP Q301,302 2PCS13 197-031n4148 Diode 100mA 75V SIGNAL D301,302 2PCS15 110-16153j26 Resistor 15K 1/6W ±5% CF 26mm TAP R302 1PC

INFINITY Harman Consumer Group International

TSS450/230

INFINITY Harman Consumer Group International

TSS450/230

INFINITY Harman Consumer Group International

TSS450/230

INFINITY

Harman Consumer Group International

TSS450/230

INFINITY Harman Consumer Group International

TSS450/230

INFINITY Harman Consumer Group International

TSS450/230

INFINITY Harman Consumer Group International

TSS450/230

INFINITY Harman Consumer Group International

TSS450/230