ingaas multichannel detector head - 滨松中国 · ingaas multichannel detector head c8061-01,...
TRANSCRIPT
www.hamamatsu.com
InGaAs multichannel detector head
Designed for InGaAs linear image sensor
C8061-01 C8062-01
1
The C8061/C8062-01 are multichannel detector heads for use with InGaAs linear image sensors. The C8061-01 is designed for the one-stage TE-cooled InGaAs linear image sensors and the C8062-01 for two-stage TE-cooled InGaAs linear image sensors.The C8061-01 and C8062-01 incorporate a low-noise driver/amplifier circuit that provide reliable operation from simple external signals. They also include a highly stable temperature controller that cools the sensor to a preset tempera-ture level (C8061-01: Ts= -10 °C, C8062-01: Ts= -20 °C) as soon as the power is turned on. If the cooler fails and overheat occurs, the built-in protection circuit automatically turns off the power to maintain safety. Despite its compact size, the hous-ing configuration is designed for good heat dissipation, and threaded mounting holes on the front panel allow connections to other devices such as monochromators. Controller for multichannel detector head C7557-01 is also available. The software supplied with the C7557-01 allows easy control of the multichannel detector head and data acquisition.
Selection GuideThe table below shows InGaAs image sensors applicable for the C8061/C8062-01. Scince the C8061/C8062-01 do not include a InGaAs image sensor, so select the desired sensor and order it sparately.
Type no.InGaAs linear image sensor
Type no. Cooling Number of pixels
Number of effective pixels*1
Pixel size[µm (H) × µm (V)]
Image size[mm (H) × mm (V)]
C8061-01
G9201-256S
One-stageTE-cooled
256 256 50 × 250 12.8 × 0.25G9202-512S 512 512 25 × 250 12.8 × 0.25G9203-256S 256 256 50 × 500 12.8 × 0.50G9204-512S 512 512 25 × 500 12.8 × 0.50G9211-256S 256 >253 50 × 250 12.8 × 0.25G9212-512S 512 >506 25 × 250 12.8 × 0.25G9213-256S 256 >253 50 × 500 12.8 × 0.50G9214-512S 512 >506 25 × 500 12.8 × 0.50
C8062-01
G9205-256W
Two-stageTE-cooled
256 >244 50 × 250
12.8 × 0.25
G9205-512W 512 >487 25 × 250G9206-02 256 >244 50 × 250
G9206-256W 256 >244 50 × 250G9206-512W 512 >487 25 × 250G9207-256W 256 >244 50 × 250G9208-256W 256 >244 50 × 250G9208-512W 512 >487 25 × 250
*1: Number of active pixels: The total number of pixels whose dark current and sensitivity uniformity do not exceed the maximum values.
Designed for InGaAs linear image sensorC8061-01: One-stage TE-cooled typeC8062-01: Two-stage TE-cooled typeBuilt-in driver/amplifier and temperature circuit
Simple signal input operationCompact configuration
Highly stable temperature controllerCooling temperature (Ta=10 to 30 °C)fixed at Td=-10 ± 0.1 °C (C8061-01), -20 ± 0.1 °C (C8062-01)
Near infrared multichannel spectroscopy
Radiation thermometryNon-destructive inspection
Optical fiber transmittance measurement
Features Applications
InGaAs multichannel detector head C8061-01, C8062-01
2
Absolute maximum ratingsParameter Symbol Min. Typ. Max. Unit
Supply voltage (for digital circuitry) VD1, VD2 -0.5 - +7
VSupply voltage (for analog circuitry) VA+ - - +18
VA- - - -18
Supply voltage Vp - - +7VF - - +14
Digital input voltage - - - VD1, VD2Operating temperature Topr +10 to +30 °CStorage temperature Tstg 0 to +50Note: Exceeding the absolute maximum ratings even momentarily may cause a drop in product quality. Always be sure to use the
product within the absolute maximum ratings.
Electrical characteristics[unless otherwise noted, Ta=25 °C,C8061-01: VD1,VD2=+5 V, VA+=+15 V, VA-=-15 V, VD2=+5 V, Vp=+5 V, VF=+12 VC8062-01: VD1=+5 V, VA+=+15 V, VA-=-15 V, VD2=+6 V, Vp=+6 V, VF=+12 V]
Parameter Symbol Min. Typ. Max. Unit
Digital input High level VIH +2.0 - VD1, VD2 VLow level VIL -0.5 - +0.8 V
Clock pulse frequency fCLK - - 4 MHzData video readout frequency fv - - fCLK/8 HzStart pulse width tst 1/fCLK - - s
Digital output High level (Io=-6 mA) VoH +2.0 - - VLow level (Io=+6 mA) VoL - - +0.8 V
Power supply conditions
Voltage
Digital circuitry VD1 +4.75 +5.0 +5.25 V
Analog circuitry VA1+ +14.5 +15.0 +15.5 VVA1- -14.5 -15.0 -15.5 V
Other
C8061-01 VD2+4.75 +5.0 +5.25 V
C8062-01 +5.75 +6.0 +6.25 VC8061-01 Vp +4.75 +5.0 +5.25 VC8062-01 +5.75 +6.0 +6.25 V
VF +11.75 +12.0 +12.25 V
Current
VD1 (+5 V) - - - +100 mAVA+ (+15 V) - - - +200 mAVA- (-15 V) - - - -50 mAVD2C8061-01: +5 VDCC8062-01: +6 VDC
- - - +50 mA
Vp C8061-01: +5 VDC - - +1.2 +1.7 AC8062-01: +6 VDC - - +2.0 +3.0 A
VF (+12 V) - - - +200 mA
InGaAs multichannel detector head C8061-01, C8062-01
Specifications for temperature controller[Unless otherwise noted, Ta=25 °C, C8061-01: Td=-10 °C, VD1=+5 V, VA+=+15 V, VA-=-15 V, VD2=+5 V, Vp=+5 V, VF=+12 VC8062-01: Td=-20 °C, VD1=+5 V, VA+=+15 V, VA-=-15 V, VD2=+6 V, Vp=+6 V, VF=+12 V]
Parameter Symbol Min. Typ. Max. Unit
Cooling temperature C8061-01 Td -11 -10 -9 °CC8062-01 -21 -20 -19 °C
Temperature control range ∆Td -0.1 - +0.1 °CPower dissipation of peltier element
C8061-01 Pp - - 7 WC8062-01 - - 11 W
Cool down time to preset temperature to - - 5 minSetting temperature for overheat protection*4 To - +45 - °C*4: Temperature at back side of housing. (between housing and fin)Note: Other functions include error display, automatic power off, and detection of electrical oepns and shorts by the thermosensor.
3
Electrical and optical characteristics[Unless otherwise noted, Ta=25 °C,C8061-01: Td=-10 °C, G9211-256S (Cf=10 pF) , VD1=+5 V, VA+=+15 V, VA-=-15 V, VD2=+5 V, Vp=+5 V, VF=+12 VC8062-01: Td=-20 °C, G9208-256W (Cf=10 pF), VD1=+5 V, VA+=+15 V, VA-=-15 V, VD2=+6 V, Vp=+6 V, VF=+12 V]
Parameter Symbol Min. Typ. Max. Unit
Spectral response range C8061-01λ
- 0.9 to 1.67 - µmC8062-01 - 0.9 to 2.55 - µm
Peak sensitivity wavelength C8061-01λp - 1.55 - µm
C8062-01 - 2.3 - µmSaturation output charge Qsat - 30 - pCConversion gain*2 G - 0.3 - V/pC
Dark current C8061-01 ID - 0.1 3 pA/pixelC8062-01 - 500 2000 pA/pixel
Photoresponse nonuniformity*3 C8061-01 PRNU - - ±5 %C8062-01 - - ±10 %
*2: Including the circuit gain*3: Measured at 50% of the saturated output charge. Except for the start pixel and the last pixel.
InGaAs multichannel detector head C8061-01, C8062-01
KMIRB0071EB
Spectral response
Wavelength (µm)
Phot
osen
sitiv
ity (A
/W)
0.5 1.0 1.5 2.0 2.5 3.00
0.5
1.0
1.5(Typ.)
Td=25 °CTd=-10 °C Td=-20 °C
G9207-256WG9206-02G9206-512W
G9205 series
G9208 series
G9201 toG9204 seriesG9211 toG9214 series
G9206-256W
Spectral response
KMIRB0071EC
CDS
1 pixel
INP
Shift register
Equivalent circuit (G8050 to G8053/G8160 to G8163/G8180/G9201 to G9204/G9211 to G9214/G9205 to G9208 series)
Offsetcompensation
circuitVIDEO
AD-TRIG
Low gain
High gain
KMIRC0010ED
Timing generator
CLK
External input
RESET VrefVssVdd
Photodiode
Equivalent circuit
KMIRC0010ED
4
InGaAs multichannel detector head C8061-01, C8062-01
5
LED
TH. H
TE+ TE-
THERM
Timing generator
D.GNDVA1+ (+15 V)
A.GND
CLKStart
EOSTrigger
Cf SEL
Thermo-electric cooler
InGaAs image sensor
Buffer amplifier
Data video
Amplifier
Voltageregulator
G9201-256SG9203-256SG9211-256SG9213-256SG9205-256WG9206-02G9206-256WG9207-256WG9208-256W
CLKReset
Cf selectAD-TRIG
THERM
INPVrefVddVss
VP *P.GNDVD2 *D.GNDVF (+12 V)F.GNDTemp monitor
Video
* +5 V (C8061-01), +6 V (C8062-01)
AmplifierMUX & Amplifier
DC clamp
Cooling controlVD1 (+5 V)
VA1- (-15 V)
Block diagram 1
KACCC0193ED
Temperature controller
Block diagram 1 (when used in combination with 256-pixel image sensor)
KACCC0193ED
LED
TE+ TE-
THERM
Timing generator
D.GNDVA1+ (+15 V)
A.GND
CLKStart
EOSTrigger
Cf SEL
Thermo-electric cooler
InGaAs image sensor
Buffer amplifier
Data video
Voltageregulator
G9202-512SG9204-512SG9205-512WG9206-512WG9208-512WG9212-512SG9214-512S
CLK-odd, CLK-evenReset-odd, Reset-even
Cf selectAD-TRIG-odd, AD-TRIG-even
THERM
INPVrefVddVss
VP*P.GNDVD2*D.GNDVF (+12 V)F.GNDTemp monitor
Video-odd
Video-evenMUX & Amplifier
DC clamp
Cooling controlVD1 (+5 V)
VA1- (-15 V)
Block diagram 2 (C8061-01)
KACCC0194ED
TH. H
Temperature controller
Amplifier
Amplifier
* +5 V (C8061-01), +6 V (C8062-01)
Block diagram 2 (when used in combination with 512-pixel image sensor)
KACCC0194ED
InGaAs multichannel detector head C8061-01, C8062-01
6
Timing chart 1 (when used in combination with 256-pixel image sensor)
KACCC0195EB
Timing chart 1 (C8060/C8061/C8062-01)
KACCC0195EB
Note: N is the number of pixels (N=256)
StartCLK
ClockResetVideo
TriggerData valid
EOS
8 clocks 8 × (N-1) clocks 17 clocks
ch 1
ch 1
ch 2 ch 3 ch 4
ch 2 ch 3 ch 4
ch (N-3) ch (N-2) ch (N-1) ch N
ch (N-3) ch (N-2) ch (N-1) ch N
StartCLK
ClockResetVideo
TriggerData valid
EOS
Integration period
ch 1 ch 2 ch 3
ch 1 ch 2 ch 3
2 clocks
Timing chart 2 (when used in combination with 512-pixel image sensor)
KACCC0196EC
Timing chart 2 (C8060/C8061/C8062-01)
KACCC0196EC
Note: N is the number of pixels (N=512)
8 clocks 8 × (N-1) clocks 17 clocks
ch 1 ch (N-3) ch (N-1)
ch (N-2) ch N
ch 3
ch 2 ch 4
StartCLK
Clock-oddReset-oddVideo-oddAD-TRIG-odd
AD-TRIG-evenVideo-even
Clock-evenReset-even
TriggerData valid
EOS
StartCLK
Clock-oddReset-oddVideo-oddAD-TRIG-odd
AD-TRIG-evenVideo-even
Clock-evenReset-even
TriggerData valid
EOS
ch 4 ch Nch 3ch 2ch 1 ch (N-1)ch (N-2)ch (N-3)
ch 1 ch 3
ch 2
ch 3ch 2ch 1
Integration period
2 clocks
InGaAs multichannel detector head C8061-01, C8062-01
7
Pin assignment of “signal I/O” connector15-pin D-sub connector
KACCC0069EA
12345678
9101112131415
15-pin D-sub connector
KACCC0069EA
Pin no. Terminal name Description
1 Cf SEL
Digital input signal used to select conversion gain of charge amplifier in InGaAs image sensor.HCMOS compatibleHigh level or left open: Low gain (0.3 V/pC)Low level: High gain (6 V/pC)
2 Data video*5 Analog video outputPositive polarity (Typ. 10 V)
3 VA1+ (+15 V) Analog power supply4 VA1- (-15 V) Analog power supply5 VD1 (+5 V) Digital power supply
6 Start Digital input signal for initializing the circuitHCMOS compatible. Positive logic
7 CLKDigital input signal for operating the circuitHCMOS compatibleRising edge operation
8 EOSDigital output signal for indicating end-of-scan of the image sensorHCMOS compatibleNegative logic
9 A.GND Analog ground10 A.GND Analog ground11 NC No Connection12 D.GND Digital ground13 D.GND Digital ground14 D.GND Digital ground
15 TriggerDigital output signal for A/D conversionHCMOS compatiblePositive logic
*5: Depending on the individual sensor to install, some channels might have a dark output lower than ground potential so use a bipolar A/D converter.
InGaAs multichannel detector head C8061-01, C8062-01
8
12345
6789
9-pin D-sub connector
KACCC0075EA
Pin assignment of “TE-control” connector9-pin D-sub connector
KACCC0075EA
Pin no. Terminal name Description1 VD2*6 Power supply2 Temp Monitor Analog output signal of the temperature of the InGaAs image sensor
3 Cooling control
Digital input signal for starting to cool downHCMOS compatible.H-level or left open: coolingL-level : stand-by
4 Vp*6 Power supply for the thermoelectric cooler in the InGaAs image sensor5 VF (+12 V) Power supply for cooling fan6 D.GND Ground7 D.GND Ground8 P.GND Power supply return of the thermoelectric cooler mounted in the InGaAs image sensor9 F.GND Ground return for cooling fan
*6: C8061-01: +5 V, C8062-01: +6 V Note: Available for using same power supply (+6 V) for “VD2” and “VP”.Caution: Do not connect “VD2” and “VP” together on the backside of the 9-sub D-sub connector.
These may be connected (shorted) at the power supply end, not 9-pin D-sub connector.
InGaAs multichannel detector head C8061-01, C8062-01
9
KACCA0089EA
KACCA0090EA
Dimensional outline (unit: mm)C8061-01
C8062-01
100.0
90.0
77.0
Focalplane
34.0
35.0
80.0
60.0
82.0
62.0 11.0
50.0
50.0
Focalplane
2.050.5
(4 ×) M3 depth 4
Dimensional outline (C8061, C8061-01, unit: mm)
KACCA0089EA
TE Control I/OSignal I/O
100.0
90.0
Focalplane
65.0
80
.0
60
.0
50.0
50.0
Focalplane
2.250.5
(4 ×) M3 depth 4
Dimensional outline (C8062, C8062-01, unit: mm)
KACCA0090EA
88.4
75.481
.0
TE Control I/OSignal I/O
34.0
InGaAs multichannel detector head C8061-01, C8062-01
10
KACCC0197EB
Connection example
Power supply VF (+12 V)F.GNDVP *P.GNDVD2 *D.GND
Controller Cooling controlD.GND
TE controller
Controller Cf SELD.GND
Power supply
I/O signal
VD1 (+5 V)D.GNDVA+ (+15 V)VA- (-15 V)A.GND
Pulse generator CLKD.GNDStartD.GND
S/H or A/D Analog inputA.GNDS/H inputD.GND
Oscilloscope CH1GNDExt.TrigGND
1
2
3
4
5
6
7
8
9
12
3
4
5
6
7
8
9
10
11
12
13
14
15
Connection example (C8061/C8062-01)
KACCC0197EB
* C8061-01: +5 V, C8062-01: +6 V
Multichannel detector head controller C7557-01When connected to a HAMAMATSU multichannel detector head and a personal computer, the C7557-01 allows easy control of the de-tector head and data acquisition by using dedicated software that comes with the unit.
Suitable multichannel detector head
C7020/-02, C7021/-02, C7025/-02,C7040, C7041, C7043, C7044, C7180,C7181, C8061-01, C8062-01, C10150, C10151,C5964 series, C8892
InGaAs multichannel detector head C8061-01, C8062-01
11
Accessories
· Spare fuse (2.5 A)*7
· AC cable· 2 to 3 conversion adapter· USB cable· Detector head connection cables (for “SIGNAL I/O” and “TE CONTROL I/O” terminal of multichannel detector head)
· CD-R (MCD USB driver, software, operation manual)· MOS adapter*8
*7: Contained in the holder just above the AC cable connector on the C7557-01 rear panel.*8: When operating the NMOS multichannel detector head, always be sure to attach the MOS adapter (supplied) to the C7557-01 main
unit. If the the NMOS multichannel detector head is connected and the power is turned on without attaching the adapter, the power supply in the C7557-01 main unit may be damaged.
MOS adapter mounting example
MOS adapter
www.hamamatsu.comHAMAMATSU PHOTONICS K.K., Solid State Division1126-1 Ichino-cho, Higashi-ku, Hamamatsu City, 435-8558 Japan, Telephone: (81) 53-434-3311, Fax: (81) 53-434-5184U.S.A.: Hamamatsu Corporation: 360 Foothill Road, Bridgewater, N.J. 08807, U.S.A., Telephone: (1) 908-231-0960, Fax: (1) 908-231-1218Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49) 8152-375-0, Fax: (49) 8152-265-8France: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: 33-(1) 69 53 71 00, Fax: 33-(1) 69 53 71 10United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road, Welwyn Garden City, Hertfordshire AL7 1BW, United Kingdom, Telephone: (44) 1707-294888, Fax: (44) 1707-325777North Europe: Hamamatsu Photonics Norden AB: Torshamnsgatan 35 16440 Kista, Sweden, Telephone: (46) 8-509-031-00, Fax: (46) 8-509-031-01Italy: Hamamatsu Photonics Italia S.r.l.: Strada della Moia, 1 int. 6, 20020 Arese (Milano), Italy, Telephone: (39) 02-93581733, Fax: (39) 02-93581741China: Hamamatsu Photonics (China) Co., Ltd.: B1201, Jiaming Center, No.27 Dongsanhuan Beilu, Chaoyang District, Beijing 100020, China, Telephone: (86) 10-6586-6006, Fax: (86) 10-6586-2866
Product specifications are subject to change without prior notice due to improvements or other reasons. This document has been carefully prepared and the information contained is believed to be accurate. In rare cases, however, there may be inaccuracies such as text errors. Before using these products, always contact us for the delivery specification sheet to check the latest specifications.Type numbers of products listed in the delivery specification sheets or supplied as samples may have a suffix "(X)" which means preliminary specifications or a suffix "(Z)" which means developmental specifications.The product warranty is valid for one year after delivery and is limited to product repair or replacement for defects discovered and reported to us within that one year period. However, even if within the warranty period we accept absolutely no liability for any loss caused by natural disasters or improper product use.Copying or reprinting the contents described in this material in whole or in part is prohibited without our prior permission.
Information described in this material is current as of March, 2015.
Cat. No. KACC1089E10 Mar. 2015 DN
InGaAs multichannel detector head C8061-01, C8062-01
12
Connection example
KACCC0402ED
Connections to multichannel detector head and PC (C7557-01)
KACCC0402ED
AC cable (100 to 240 V included with C7557-01)
PC (USB 2.0/3.0) [Windows 7 (32-bit, 64-bit)/
Windows 8 (64-bit)/Windows 8.1 (64-bit)]
C7557-01
USB cable(included with C7557-01)
Image sensor+
Multichanneldetector head
Shutter*timing pulse
Dedicated cable(included with C7557-01)
* Shutter, etc. are not available.
Trig.
TE CONTROL I/O
SIGNAL I/O
POWER
Related informationwww.hamamatsu.com/sp/ssd/doc_en.html
Precautions· Disclaimar