installation guide
TRANSCRIPT
Qpuncture3 Installation Guide 1. Hardware & Software Requirements To run Q-TestPrep (software), you need the following minimum hardware and software:
l Operating System: Microsoft Windows only. Windows XP SP2 (32 / 64 bit), Windows
Vista or 7 (32 / 64 bit)
l Microsoft .NET Framework 2.0
l Pentium 4 2.0GHz or higher
l 256MB of RAM (512MB or more recommended)
l Hard disk drive with 700MB of free space
l SVGA(1024 x 768) or higher resolution video adapter and display
SP: Serivce Pack
2. Installing Qpuncture3 1. If you have the CD-Rom, insert the CD into your CD/DVD drive (printed side up).
(If you downloaded the software from the website, then skip step 1.)
2. This Setup CD has 'Auto run' feature. If you insert CD-Rom, the installation will start.
If 'Auto run' is disabled, you need to run 'setup' by manually. Open the CD-Rom or
downloaded file, and double click 'setup'.
3. Getting a license
Once you installed our program, you will see license message with a hardware ID
(HID) of your computer. The activation code will be generated according to your HID.
The HID is different in each computer. If you request a license from your laptop, then
the activation code we send will be accepted on your laptop computer only.
Step 1. ** License Message **
If you see this license message, please click "Request license" now.
Step 2. – ** Requires Internet Connection **
In this request license window, type your personal information to register your
software and the serial number for the product.
Once you fill out all the information, click "Send My Information". Then your
information will be sent to our company automatically.
After sending your information, you will get the activation code by email within
several hours, at most one business day.
Step 3. – ** Acquire Activation code and apply to your software **
Check your email for activation code. In most cases, you will receive this activation
code within one business day after you request license.
In the license email, you will see instructions "How to apply the license" along with an
attached file "activationcode.txt". Download the attached file "activationcode.txt".
We cannot explain how to download the attached file, because there are many
different email providers and email client software. Please study how to download the
attached file from email with your email provider or email client software.
Ok, we assume that you managed to download the "activationcode.txt" file.
Double click the "activationcode.txt" to open. Default program for opening a text file
(*.txt) is notepad.
If you see strange text, do not panic. This code is normal.
The activation code is very long text file with not understandable text.
What you have to do now is just copy this code and paste it to "Activate code" window
in the software.
Click "Edit" menu.
Click "Select All" under "Edit" menu.
Then all the text will be highlighted.
Click "Edit" menu again. Then select "Copy" under the "Edit" menu.
If you click "Copy", then nothing will be happened. It is normal.
Now we are going to paste the code to your software. Open the software now.
If you see "License Message", move the mouse cursor to "Activation Code" and mouse
left click.
And then press mouse right button (right click) on the "Activation code" field.
If you right click, you will see a pop-up menu which includes "Paste" sub-menu.
Click (press mouse left button) on the "Paste" menu.
If you follow the steps correctly, you will see the activation code has been copied into
"Activate Code".
Now press "Activate now!" button to apply the license.
The activation code has been applied and you can start the program now.
Thank you for your patience and use the software well.