installation instruction for anti-slip guard - ma1509 · the anti-slip guard can be installed in...
TRANSCRIPT
![Page 1: Installation instruction for anti-slip guard - MA1509 · The anti-slip guard can be installed in several different ways. It is best installed on one of our fasteners (the fasteners](https://reader036.vdocuments.net/reader036/viewer/2022070919/5fb8e3637743a005d21f2481/html5/thumbnails/1.jpg)
Installation instruction for anti-slip guard page 1 MA1509
Industrivägen 1 523 90 Ulricehamn [email protected]
Tel. 0321-261 60 www.welandstal.se
The anti-slip guard can be installed in several different ways. It is best installed on one of our fasteners (the fasteners must be installed according to the associated installation instruction). The installation must withstand a vertical downward load of 150kg in all directions. Adjust the anti-slip guard so it fits against any gutter and so the ladder can be hooked on without interference. The anti-slip guard can also be installed on walls and roof ladders.
Sealing plate on tar paper roof
Directly installed on sheet metal IP profile on sheet metal roof
Standing seam mount on long strip roofing
The hook and the rail are put together using 4 self-drilling screws, 6.3x19mm.
![Page 2: Installation instruction for anti-slip guard - MA1509 · The anti-slip guard can be installed in several different ways. It is best installed on one of our fasteners (the fasteners](https://reader036.vdocuments.net/reader036/viewer/2022070919/5fb8e3637743a005d21f2481/html5/thumbnails/2.jpg)
Directly installed where guttering is lacking.
WG1000 fixed directly into the grooved board using 4x 5mm wood screws.
WG1000 Installed with through M10 bolt and nut.
Installation instruction for anti-slip guard page 2 MA1509
Industrivägen 1 523 90 Ulricehamn [email protected]
Tel. 0321-261 60 www.welandstal.se
Directly installed on grooved board.