insulated hand tools
TRANSCRIPT
SECTION “B”INSULATED HAND TOOLS
Page13
INDEX
DESCRIPTION PAGE
- GRIP-ALL CLAMPSTICKS (SHOTGUN) 14 - 15
- WIRE HOLDING STICK 16
- UNIVERSAL POLES 18
- SPLICED DISCONNECT STICKS 20 - 21
- HEADS 21
- HOT STICK WITH ALL-ANGLE COG WRENCH 22
- AMERTONGS 22
- INSULATED OILER 22
- TIE STICKS 23
- CROSSARM TOOL HANGER 23
- HOT LINE TOOL RACK 23
- UNIVERSAL TOOL ACCESSORIES 24 - 28
- HOT STICK WITH FLEXIBLE SOCKETS 17
- SECTIONAL HOT STICK 19
SECTION “B” - INSULATED HAND TOOLSPage14
GRIP-ALL CLAMPSTICKS (”Shotgun”)
C403-0294
RITZGLAS ® GRIP-ALL CLAMPSTICK is the most used HOT LINE TOOL and makes part of any toolset of electrical live line maintenance. The position of the hook is operated through a voidfree pulltruded fiberglass rod operated from the handle, allowing three different basic positions:
Position to hook t h e g r o u n d i n g clamp eye or some other part to be handled.
In this position the hook closes the grounding clamp eye, allowing it to b e s w i v e l l e d , including in angles.
When drawn back into the head, the hook keeps the grounding clamp completely locked to the grip-all stick, which is ideal for its instal lat ion and removal.
OPEN CLOSED DRAWN BACK
C403-0298DRAWN BACK
For universalhead onhandle end ofany Single -Piece or HingedGrip-All, addsuffix “A” toCatalog No.
Universal Adapter
M1867
Grip-All ClampstickAssist Ring
CS-U Universal head onhandle end
E403-2543
HINGED STYLE
NOTE: All above HOT STICKS can be supplied with WATERPROOF CARRYING BAG, with reinforced plastic handle and inside dividers in order to separate the sections, with EXTRA BAG for heads.
SECTION “B” - INSULATED HAND TOOLS Page15
GRIP-ALL CLAMPSTICKS (”Shotgun”)
STANDARD MODEL
LIGHT MODEL (EXCLUSIVITY OF RITZ)
offering considerable economic and operational advantages
HINGED MODEL
ACCESSORIES
RITZGLAS ® GRIP-ALL CLAMPSTICK is manufactured in three versions:STANDARD - using a 32mm Ø pole.LIGHT - using a 25mm Ø pole (exclusivity of RITZ).HINGED - using a 32mm Ø pole.
Catalog N° Ø (mm) Total Length (mm)
Total Length (mm)
C403-0291 32 1.350
1.97032C403-0292
2.58032C403-0293
3.19032C403-0294
3.80032C403-0295
Model
Standard
Standard
Standard
Standard
Standard
Max. Voltage (kV)Approx. Weight
(kg)
Approx. Weight(kg)
15 2,70
3,0035
3,40138
3,70230
4,10345
Catalog N°
Catalog N°
Ø (mm)Model Max. Voltage (kV)
1.350 15 1,90
2,20351.970
2,501382.580
2,802303.190
25
25
25
25
25 3,103453.800
C403-0291/L
C403-0292/L
C403-0293/L
C403-0294/L
C403-0295/L
Light
Light
Light
Light
Light
The Grip-All Stick bags are the ones with an “S” before the reference of each model.
Ø (mm)Dimensions (mm)
ExtendedApprox. Weight
(kg)
C403-0296 32
32
32
32
32
32
1.015 2.005 3,60
4,10
4,50
4,70
5,00
5,20
2.590
3.200
3.810
4.420
5.030
1.320
1625
1.930
2.235
2.540
C403-0297
C403-0298
C403-0299
C403-0342
C403-0343
Folded
Grip-All Extension - C403-0377
CatalogN°
Description
C403-0377
C403-0378
E403-2543
M1867
32mm Ø x 1.800mm Grip-All Extension
32mm Ø x 1.200mm Grip-All Extension
Grip-All Assist Ring
Universal Adapter
Approx.Weight
(kg)
2,00
2,60
0,68
0,10
NOTE: All above HOT STICKS can be supplied with WATERPROOF CARRYING BAG, with reinforced plastic handle and inside dividers in order to separate the sections, with EXTRA BAG for heads.
SECTION “B” - INSULATED HAND TOOLSPage16
WIRE HOLDING STICK
With handle positioned as shown in square photo, above, the knurled nut can be turned to adjust the gripper to the exact wire size.
Head of the tool locks in three positions... enables l i n e m a n t o h a n d l e conductor from any angle.
The gripper is equipped with an eye so that other sticks can assist with heavy bending. Will handle N°. 6 solid copper (4,11mm Ø) through 1.590 kcmil ACSR (38,1mm Ø).
C403-3068
CatalogN°
Pole Dia. & Overall LengthApprox.Weight
(kg)
C403-3069
C403-3068 32mm Ø x 1.956mm
32mm Ø x 2.565mm
3,00
3,60
NOTE: All above HOT STICKS can be supplied with WATERPROOF CARRYING BAG, with reinforced plastic handle and inside dividers in order to separate the sections, with EXTRA BAG for heads.
SECTION “B” - INSULATED HAND TOOLS Page17
HOT STICK WITH FLEXIBLE SOCKETS
H1891-5
B
A
H1891-4
B
A
H1891-2
H1891-7
CatalogN°
DescriptionApprox.Weight
(kg)
066780
C403-1085EP
Ratchet wrench
Includes 8 deep-well 6 point sockets in sizes of1/2”, 9/16”, 5/8”, 11/16”, 3/4”, 13/16”, 7/8”, 15/16”.
0,45
2,10
066780
C403-1085EP
ACCESSORIES
CatalogN°
Description
H1891-2 with flexible socket and fix socket
with flexible socket and fix socketH1891-3
H1891-4
H1891-5
H1891-6
H1891-7
H1891-8
with Ratchet Wrench
with Flexible socket and universal head
with Flexible socket and universal head
with Flexible socket and Ratchet wrench
with Flexible socket and Ratchet wrench
Ø
38
38
38
38
38
38
38
Approx.Weight
(kg)
2,40
1,90
1,80
2,90
2,40
2,80
Dimensions (mm)
1.750
2.350
1.760
1.715
2.325
1.650
2.260
1.930
2.505
1.905
1.905
2.520
1.905
2.520
A B
38mm Ø
38mm Ø
38mm Ø
38mm Ø
2,60
NOTE: All above HOT STICKS can be supplied with WATERPROOF CARRYING BAG, with reinforced plastic handle and inside dividers in order to separate the sections, with EXTRA BAG for heads.
SECTION “B” - INSULATED HAND TOOLSPage18
UNIVERSAL POLES
H1760-4
400mm
H1761
CatalogN°
DescriptionPole
Diam.(mm)
Approx.Weight
(kg)
H-1760 Pole with one spline tie wire assistant
Pole with one spline pole hanger
Rigid splice pole with one spline tie wire assistant
Pole with two splines tie wire assistant
Pole with two splines tie wire assistant
Rigid splice pole with two splines tie wire assistant
Pole with two splines pole hanger
Pole with two splines pole hanger
Pole with two splines pole hanger
Spline universal storm tool with two skirts pole hanger
Hinged pole with one spline pole hanger
Pole with two splines, pole hanger
Pole with two splines pole hanger
Pole with two splines pole hanger
Pole with two splines pole hanger
Spline universal head only
Spline universal head only
H1760-2
H1760-3
H-1760-4
H1760-6
H1760-10
H1760-12
H1760-14
H1761
H1770
H1790-8
H1790-10
H1790-12
H1790-14
H4455
H4455A
1,70
1,30
2,30
1,60
2,10
2,60
2,20
2,50
2,90
1,80
2,00
2,80
3,10
3,50
4,50
0,30
0,40
32
32
32
32
32
32
32
32
32
32
32
38
38
38
38
32
38
OverallLength(mm)
H1760-1
2.575
1.885
1.245 + 1.220
1.940
2.550
1.245 + 1.245
3.100
3.750
4.344
2.495
2.490
2.555
3.100
3.755
4.344
--
--
Hinge
Splice
tie wire assistant
H1760-5Pole hanger
M3002
CatalogN°
DescriptionApprox.Weight
(kg)
M3002 0,055
0,060
0,060Distance-Limiting device for 32mm Ø pole
Distance-Limiting device for 32mm Ø pole
Distance-Limiting device for 38mm Ø poleM3002-1
C403-0799
H1760-5 Plastisol coated hanger fits on 32mm Ø and 38mm Ø - pole 0,120
C403-0799
ACCESSORIES
NOTE: All above HOT STICKS can be supplied with WATERPROOF CARRYING BAG, with reinforced plastic handle and inside dividers in order to separate the sections, with EXTRA BAG for heads.
SECTION “B” - INSULATED HAND TOOLS Page19
SECTIONAL HOT STICK
Total length 1.450mm (ALL SECTIONS)
Working Length 1.250mm
Top-section with UNIVERSAL HEAD CS-U
Working Length 1.250mm
Intermediary section
Working Length 1.450mm
Base Section
STANDARD Model:
LIGHT MODEL - Exclusivity of RITZ DO BRASIL
Catalog N°
VMR-15
VMR-30
VMR-45
VMR-70
VMR-90
Description
Hot Stick - 1 section
Hot Stick - 2 sections (base + top)
Hot Stick - 3 sections (base + intermediary + top)
Hot Stick - 4 sections (base + 2 intermediary + top)
Hot Stick - 5 sections (base + 3 intermediary + top)
Totallength(mm)
1.250
2.700
3.950
5.200
6.450
Max.Voltage
(kV)
20
150
300
400
500
Approx.Weight
(kg)
0,90
2,30
3,50
4,70
5,90
Catalog N°
VMR-15/L
VMR-30/L
VMR-45/L
VMR-70/L
VMR-90/L
Description
Hot Stick - 1 section
Hot Stick - 2 sections (base + top)
Hot Stick - 3 sections (base + intermediary + top)
Hot Stick - 4 sections (base + 2 intermediary + top)
Hot Stick - 5 sections (base + 3 intermediary + top)
Totallength(mm)
1.250
2.700
3.950
5.200
6.450
Max.Voltage
(kV)
20
150
300
400
500
Approx.Weight
(kg)
0,80
1,70
2,50
3,30
4,20
with considerable economic and operational advantages
Diameter of base and intermediary section is 32mm Ø, top section is 25mm Ø
Brass fitting pin Stainless steel protection ring
RITZGLAS ®Fiberglass-epoxy tube,filled with polyurethanefoam.
The RITZGLAS ® poles, are submitted to 100 kV electrical tests in each 300mm, assuring an ideal insulation. Tests are made according to NBR 6936, ASTM F 711, IEC 855.
Diameter of base and intermediary section is 38mm Ø, top section is 32mm Ø
NOTE: All above HOT STICKS can be supplied with WATERPROOF CARRYING BAG, with reinforced plastic handle and inside dividers in order to separate the sections, with EXTRA BAG for heads.
SECTION “B” - INSULATED HAND TOOLSPage20
SPLICED DISCONNECT STICKS
H3046-13
Disconnect Sticks provide insulation safety for linemen in operating disconnect switches and fuse cutouts. They are also used for installing and removing open-link fuse links. All poles are made of RITZGLAS®.
Below you find dimensions of 3 typical disconnect heads. However different models according to your requirements are available.
32mm (1 1/4”) Switch Stick Head
Cat. N.° Poles Diam. & Length (mm) Weight (kg)
H3046
H3046-11
H3046-12
H3046-13
H3046-14
H3046-17
Head Only
32 x 1.220
32 x 1.830
32 x 2.440
32 x 3.050
32 x 3.650
0,11
0,60
0,70
1,00
1,20
1,60
38mm (1 1/2”) Disconnect Head
Cat. N.° Poles Diam. & Length (mm) Weight (kg)
H3046-2
H3046-22
H3046-23
H3046-24
H3046-15
H3046-16
H3046-18
H3046-20
Head Only
38 x 1.860
38 x 2.460
38 x 3.070
38 x 3.650
38 x 4.900
38 x 5.510
38 x 6.120
0,14
1,00
1,30
1,60
1,80
2,40
2,60
3,00
Light Disconnect Stick
44 mm
38 mm
Standard Disconnect Stick
32mm (1 1/4”) Disconnect Head
Cat. N.° Poles Diam. & Length - (mm) Weight (kg)
H3146-12
H3146-16
H3146-18
H3146-20
H3146-24
(1) 32 Ø x 1.830 and (1) 38 Ø x 1.860
(1) 32 Ø x 2.430 and (1) 38 Ø x 2.460
(1) 32 Ø x 2.430 and (1) 38 Ø x 3.070
(1) 32 Ø x 3.050 and (1) 38 Ø x 3.070
(1) 32 Ø x 3.650 and (1) 38 Ø x 3.670
2,70
3,40
3,70
4,10
4,80
2 Sections Spliced Disconnect Stick
Cat. N°.: H3146-24
32mm Ø 38mm Ø
3650mm 3670mm
38 mm
NOTE: All above HOT STICKS can be supplied with WATERPROOF CARRYING BAG, with reinforced plastic handle and inside dividers in order to separate the sections, with EXTRA BAG for heads.
SECTION “B” - INSULATED HAND TOOLS Page21
SPLICED DISCONNECT STICKS
Cat. N.° Poles Diam. & Length - mm Weight (kg)
H3246-12
H3246-24
H3246-28
(1) 38 Ø x 1.860 and (2) 32 Ø x 1.830
(1) 38 Ø x 2.430 and (2) 32 Ø x 2.430
(1) 38 Ø x 3.070 and (2) 32 Ø x 2.430
4,65
5,75
6,25
3 Sections Spliced Disconnect Stick
Cat. N°.: H3246-24
32mm Ø 32mm Ø
2.430mm 2.430mm 2.430mm
Standard UNIVERSAL Head for:32mm (1¼”) Ø or 38mm (1½”) Ø poles
38mm Ø
HEADS
CP-1/U CP-3/U CP-5/U CP-11/U CP-13/U CP-14/U
DescriptionApprox.Weight
(kg)
CP-1/U
CP-3/U
CP-5/U
CP-11/U
CP-13/U
CP-14/U
Brass-silicium head, with circuit-breaker operation shaft and fitting for cartridge cutoutcatch.
Inclined aluminum head, with circuit-breaker operation shaft and fitting for cartridgecutout catch.
Steel head for HXO switches operation.
Inclined steel head, with circuit-breaker operation shaft and fitting for cartridge cutoutcatch.
Brass-silicium head, with circuit-breaker operation shaft and fitting for cartridge cutoutcatch.
Brass-silicium head, with circuit-breaker operation shaft
0,20
0,20
0,30
0,35
0,25
0,15
NOTE: Different heads can be supplied according clients specifications.
CatalogN°
NOTE: All above HOT STICKS can be supplied with WATERPROOF CARRYING BAG, with reinforced plastic handle and inside dividers in order to separate the sections, with EXTRA BAG for heads.
SECTION “B” - INSULATED HAND TOOLSPage22
HOT STICK WITH ALL-ANGLE COG WRENCH
B
A
CatalogN°
C403-0186
C403-0185
C403-0184
C403-0187
Ø
38
38
38
38
Approx.Weight
(kg)
2,60
3,20
3,60
4,20
Dimensions (mm)
835
1.435
2.040
2.500
1.840
2.450
3.060
3.670
A B
AMERTONGS
CatalogN°
Dimensions (mm)
Ø Length
Approx.Weight
(kg)
H1968-8
H1968-6
H1978-6*
H1978-8*
32
32
32
32
1.795
2.410
1.906
2.516
1,90
2,30
3,30
3,70
32mm Ø
38mm Ø
* Hinged Amertong
INSULATED OILER
32mm Ø
CatalogN°
DescriptionApprox.Weight
(kg)
H1980-8 Insulated Oiler 1,50
OverallLength(mm)
2.600
NOTE: All above HOT STICKS can be supplied with WATERPROOF CARRYING BAG, with reinforced plastic handle and inside dividers in order to separate the sections, with EXTRA BAG for heads.
SECTION “B” - INSULATED HAND TOOLS Page23
TIE STICKS
Rotary Prong Rotary Blade Two-Prong
H1855-26
CatalogN°
TIE STICKS
H1855-20
H1855-25
H1855-26
Approx.Weight
(kg)
1,80
1,70
1,70
1,85
2.375
2.375
2.375
2.375
OverallLength(mm)Head End
H1855-19 Rotary Prong
Two-Prong
Rotary Prong
Rotary Blade
Universal
Universal
Rotary Blade
Universal
CROSSARM TOOL HANGER
HOT LINE TOOL RACK
CatalogN°
DescriptionApprox.Weight
(kg)
1,00M1860 Crossarm Tool Hanger
CatalogN°
Description No. of ToolsAccommodated
Approx.Weight
(kg)
3,60M4660 1 Tool Rack* 12
* These are normally used in pairs:Quantities of two M4660 should be specified.
32mm Ø
M1860
M4660
NOTE: All above HOT STICKS can be supplied with WATERPROOF CARRYING BAG, with reinforced plastic handle and inside dividers in order to separate the sections, with EXTRA BAG for heads.
SECTION “B” - INSULATED HAND TOOLSPage24
UNIVERSAL TOOL ACCESSORIES
PIN HOLDERCat. N°: M4455-2
Approx. Weight: 0,18 kg
SNAPOUT COTTERKEY REMOVERCat. N°: M4455-12Approx. Weight: 0,17 kg
CUTOUT TOOLCat. N°: M4455-5
Approx. Weight: 0,76 kg
SNAPOUT DISCONNECTCat. N°.: M4455-13Approx. Weight: 0,20 kg
RATCHET WRENCHCat. N°.: M4455-6Approx. Weight: 0,75 kg
LOCATING PINCat. N°.: M4455-15Approx. Weight: 0,29 kg
DISCONNECTCat. N°.: M4455-9Approx. Weight: 0,07 kg
FOLDING RULECat. N°.: M4455-16Approx. Weight: 0,24 kg
CHUCK BLANKCat. N°.: M4455-10Approx. Weight: 0,12 kg
FIXED PRONGTIE STICK HEADCat. N°.: M4455-17Approx. Weight: 0,45 kg
COTTER KEYINSTALLING TOOL
Cat. N°.: M4455-18Approx. Weight: 0,10 kg
COTTER KEYPUSHER
Cat. N°.: M4455-19Approx. Weight: 0,30 kg
SECTION “B” - INSULATED HAND TOOLS Page25
UNIVERSAL TOOL ACCESSORIES
BALL SOCKETADJUSTER
Cat. N°.: M4455-22Approx. Weight: 0,34 kg
SCREW DRIVERCat. N°.: M4455-28Approx. Weight: 0,12 kg
HACK SAWCat. N°.: M4455-23Approx. Weight: 0,37 kg
CLAMP STICK HEADCat. N°.: M4455-29BApprox. Weight: 0,28 kg
LINK STICK HEADCat. N°.: M4455-36Approx. Weight: 0,35 kg
PAINT BRUSHCat. N°.: M4455-25Approx. Weight: 0,18 kg
CHUCK BLANKCat. N°.: M4455-37Approx. Weight: 0,13 kg
CLEAR VISIONMIRROR
Cat. N°.: M4455-38Approx. Weight: 0,32 kg
SHEPHERD HOOKCat. N°.: M4455-39Approx. Weight: 0,36 kg
PRUNING SAWSCat. N°.: M4455-26AApprox. Weight: 0,27 kg
FIXED BLADE TIESTICK HEAD
Cat. N°.: M4455-40Approx. Weight: 0,19 kg
FLEXIBLE WRENCH HEAD12MM-SQUARE DRIVE
Cat. N°.: M4455-46Approx. Weight: 0,46 kg
SECTION “B” - INSULATED HAND TOOLSPage26
UNIVERSAL TOOL ACCESSORIES
SKINNING KNIFECat. N°.: M4455-50Approx. Weight: 0,12 kg
CONDUCTOR CLEANINGBRUSH
Cat. N°.: M4455-63Approx. Weight: 0,18 kg
M1889 with hand gripApprox. Weight: 0,36 kg
STORM TOOLCat. N°.: M4455-64
Peso aproximado: 1,08 kg
A
Ø = 32mm A = 495mm
PISTOL GRIPSAW HANDLE
Cat. N°.: M4455-66Approx. Weight: 0,18 kg
ADJUSTABLE INSULATORFORKS
Cat. N°.: M4455-67Approx. Weight: 1,10 kg
ROTARY PRONGTIE STICK HEADCat. N°.: M4455-69Approx. Weight: 0,28 kg
ROTARY BLADETIE STICK HEADCat. N°.: M4455-70Approx. Weight: 0,24 kg
CONDUCTOR GAUGECat. N°.: M4455-72Approx. Weight: 0,09 kg
SPLIT-BOLT CONNECTORTOOL
Cat. N°.: M4455-73Approx. Weight: 1,50 kg
FUSE PULLERCat. N°.: M4455-77
Max.: 38mm - Min.: 12,7mmApprox. Weight: 0,95 kg
Cat. N°.: M4455-78Max.: 64mm - Min.: 25,4mm
Approx. Weight: 0,95 kg
SPIRAL DISCONNECTCat. N°.: M4455-79Approx. Weight: 0,18 kg
ALL-PURPOSE COTTERKEY TOOL
Cat. N°.: M4455-82Approx. Weight: 0,10 kg
CONDUCTORCLEANING
BRUSH
Cat. N°.: M4455-92Approx. Weight: 0,37kg
Cat. N°.: C403-0320Approx. Weight: 0,17kg
Cat. N°.: M4455-93Approx. Weight: 0,14kg
SECTION “B” - INSULATED HAND TOOLS Page27
UNIVERSAL TOOL ACCESSORIES
UNIVERSAL ADAPTERCat. N°.: M4455-84Approx. Weight: 0,10 kg
HAMMERCat. N°.: M4455-85Approx. Weight: 0,40 kg
BALL SOCKET ADJUSTERCat. N°.: M4455-87Approx. Weight: 0,28 kg
BOLT HEAD WRENCHCat. N°.: M4455-88Approx. Weight: 0,43 kg
RATCHET WRENCHCat. N°.: M4455-89Approx. Weight: 1,12 kg
COTTER KEY PULLERCat. N°.: M4455-96Approx. Weight: 0,28 kg
CLEVIS PIN INSTALLERCat. N°.: M4455-102Approx. Weight: 0,40 kg
COTTER KEY HOLDERCat. N°.: M4455-103Approx. Weight: 0,26 kg
FLEXIBLE WRENCH HEAD12,7mm-SQUARE DRIVE
Cat. N°.: M4455-100Approx. Weight: 0,65 kg
COTTER KEY TOOLCat. N°.: C403-0006Approx. Weight: 0,35 kg
KNOCKERCat. N°.: C403-0011Approx. Weight: 0,26 kg
BALL SOCKETADJUSTER
Cat. N°.: C403-0126Approx. Weight: 0,30 kg
SECTION “B” - INSULATED HAND TOOLSPage28
UNIVERSAL TOOL ACCESSORIES
HOT RODDER TOOLCat. N°.: C403-0834Approx. Weight: 0,10 kg
UTILITY HEADCat. N°.: C403-1417/B
Approx. Weight: 0,26 kg
AEROSOL CAN HOLDERCat. N°.: C403-2270Approx. Weight: 0,30 kg
TIE WIRE CLAWCat. N°.: C403-1416/B
Approx. Weight: 0,24 kg
PLASTIC INSULATORTOOL
Cat. N°.: C403-0175Approx. Weight: 0,30 kg
ALL-ANGLE PLIERSCat. N°.: C403-0177
Aprox. Weight: 0,88 kg
CONDUCTOR SANDERCat. N°.: C403-0314Approx. Weight: 0,23 kg