integra® microfrance® : catalogue ent - plastic surgery ...€¦ · angled forceps, spoon jaws...
Embed Size (px)
TRANSCRIPT
Document for use in europe, miDDle-east anD africa only.
Integra ENT - Plastic surgery catalogueIntegra® MicroFrance®
Document for use in Europe, Middle-East and Africa onlyii
Table of contents
Table of contents ii
Ordering and warranty informations iv
Indications - Contraindications v
Diagnosis 2Air bag 2
Catheter probe 2
Diagnostic device 2
Electrode cautery 2
Screw speculum 2
Spring speculum 2
Speculum with handle 3Adapter for cold light cable 4
Cold light cable 4
Self-retaining speculum 3
Self-retaining speculum with fiber optic 4
Self-retaining speculum with handle 4
Speculum with handle, left hand 3
Tracheal dilator 3
Angled dissecting forceps 5Serrated jaws 5
Spoon jaws 5
With teeth 5
Angled forceps 6
Syringe 7Disposable syringe luer-lock 7
Injection needle 7
Replacement tube for syringe 7
Syringe 7
Washer 7
Elevator, raspatory 8Curved raspatory 8
Double elevator 8
Elevator 8
Suction tube elevator with finger control 9Bayonet tube 9
Curved self-retaining retractor 9
Malleable suction tube elevator 9
Malleable tube 9
Sharp with finger control 9
Smooth with finger control 9
Suction tube elevator with irrigation 9
Knife 10Bayonet swivel knife 11
Button end angled knife 11
Knives 10
Scalpel handle 10
Straight knife 11
Curved raspatory 12Curved raspatory square tip 12
Sharp curved raspatory 13
Straight raspatory 13
Retractor 14Blunt retractor 14
Double retractor 14
Double retractor blunt with loop and ball 18
Knife guide and retractor 18
Right angled double retractor 16
Round sharp hook 14
Sharp retractor 15
Z double retractor 16
Malleable blade retractor, Double retractor blunt 19
Curette 21
Mallet 22
Chisel 23Bayonet gouge 23
Gouge 23
Straight chisel 23
Osteotome 24
Guarded osteotome 25
Double guarded osteotome 26Double guarded osteotome 26
Osteotome gouge 26
Fine osteotome 27Curved chisel 27
Guarded osteotome curved left 27
Guarded osteotome curved right 27
Straight graduated osteotome 27
Straight guarded osteotome 27
Saw - Straight rasp 28
Curved rasp 29
Sure-grip tungsten rasp 30Coarse grit 30
Fine grit 30
Nasal splint - Cartilage template - Cartilage crushing press 31
Cartilage crushing press 31
Cartilage template 31
Nasal splint 31
Document for use in Europe, Middle-East and Africa onlyiii
Table of contents
Caliper, ruler, lacrimal probe, bone forceps 32
Angled probe caustic holder 32
Bone forceps with teeth 32
Caliper 32
Ruler 32
Rongeur 33
Bone scissors, bone rongeur 35Bone scissors 35
Double-action bone rongeur 35
Septum forceps 36
Small scissors, pointed 37
Long scissors, pointed 38
Small scissors, blunt 39
Long scissors, blunt 40
Small Metzenbaum scissors 41Curved scissors blunt tip 41
Curved scissors blunt tip tungsten blades 41
Straight scissors blunt tip 41
Large Metzenbaum scissors 42
Mayo scissors 43
Angled scissors 44
Scissors, serrated blades 45Dural scissors 30mm serrated straight blades 45
Straight scissors serrated bayonet blades 45
Straight scissors serrated blades 45
Wire cutting dural scissors 45
Small scissors bayonet blades 46Facelift curved scissors serrated bayonet blades 46
Facelift curved scissors tungsten serrated blades 46
Large scissors bayonet blades 47
Fine dissecting forceps 48Oblique teeth and plateform 48
Serrated Jaws 48
With teeth and plateform 48
Wwith teeth 48
Adson dissecting forceps 49
Medium dissecting forceps 50
Dissecting forceps, 180mm 52
Dissecting forceps, 200mm 53
Medium bipolar dissecting forceps 54
Bipolar dissecting forceps, 200mm 55
Medium monopolar dissecting forceps 56
Large monopolar dissecting forceps 57
Tungsten needle-holder 58Diamond jaws 58
Large jaws 58
Serrated jaws 58
Smooth jaws 58
Tungsten jaws 58
Large tungsten needle-holder 59
Stratte needle-holder - Needle-holder scissors 60
Fine haemostatic forceps 61Curved jaws without teeth 61
Curved jaws with teeth 61
Straight jaws without teeth 61
Straight jaws with teeth 61
Medium haemostatic forceps 62Curved jaws without teeth 62
Straight jaws without teeth 62
Straight jaws with teeth 62
Strong haemostatic forceps 63Forceps with teeth 64
Grasping forceps 64
Grasping forceps 64
Haemostatic forceps heart serrated jaws 64
serrated jaws 63
Towel clamp 63
with teeth 63
with teeth, «T» tip 63
Suction tube with finger control 65
Otoplasty 66Elevator 66
Otoabrader rasp 66
Maxillary 67Condyle retractor 67
Expansion forceps 68
Fascia press 68
Morselizer guard device 68
Round sharp hook 67
Ciseaux à lifting 69
Lifting 70Facelift blunt retractor 71
Facelift forceps with teeth 70
Facelift sharp retractor 71
Facelift sharp retractor 4 prongs 71
Forceps with teeth 70
Endobrowlift 72Arcus marginalis dissector 72
Forehead curved scissors 72
Forehead elevator suction tube 72
Forehead grasping forceps 72
Forehead half curved elevator 73
Frontotemporal dissector 72
Parietal periostal elevator 72
Periostal spreader 72
Sterilization case 73
Breast 74Breast areola marker 74
Breast curved elevator 75
Breast tensor 75
Spatulated elevator 74
Micro surgery 76Irrigation tube 76
Jewelers forceps 76
Micro dissecting forceps 76
Micro scissors 77
Needle-holder 77
Silicone cover 77
Sterilization case 77
Vascular clamp 76
Stainless steel cup, universal tray, oiling Spray 78
Stainless steel cup 78
Surgical instrument oil 78
Tray 78
Sterilization cases 79
Plastic sterilization case 80
Numerical INDEX 82
Document for use in Europe, Middle-East and Africa onlyiv
Ordering and warranty informations
Integra Limited Warranty
Please refer to the warranty included in the packaging of each product to know the applicable warranty.
Pricing :Prices stated in specific written quotations are firm for thirty days from the date given, and are otherwise subject to change without prior notice. Pricing terms stated on written agreements are governed by such agreements.
Minimum Order Requirements :The minimum ordering amount is €250 (Integra reserves the right to apply €20 handling fees and transport fees for any order below €250). For partial unit orders, please contact the customer service to obtain a quote.
Administrative fees :Administrative fees may be charged for any order.
Ordering Procedure :A written purchase order is required for the purchase of Integra MicroFrance® products.
Acceptance of Orders :Orders are accepted upon approval by Integra Customer Service.
Return Policy :• Authorization from Customer Service must be obtained prior to returning product.• Sterile product must be returned in unopened, undamaged cartons, packed to prevent damage.• Non-sterile product must be returned in unused saleable condition in original package.• A credit note will be issued for products returned less than ninety days from shipment date with a 20% restocking fee, provided
that the product being returned is not damaged and it is possible to verify that the product has not been used or opened.
Contact Customer service :
France / International+33 (0) 470 67 98 00
+33 (0) 470 67 98 20 (Fax) [email protected]
Benelux+32 (0) 2 257 4130
+32 (0) 2 253 2466 (Fax) [email protected]
United Kingdom+44 (0) 1264 312 725
+44 (0) 1264 312 821 (Fax) [email protected]
Germany+49 (0) 2102 5535 6200
+49 (0) 2102 5536 636 (Fax) [email protected]
Document for use in Europe, Middle-East and Africa onlyv
Indications - Contraindications
MicroFrance® ENT Instrumentation
INDICATIONS• All the medical devices showed in this catalogue have indications
for diagnosis, ENT surgery and/or plastic surgery.• Sizes are not contractual and are given for information purposes only.
CONTRAINDICATIONS• Do not use in indications other than the indications mentioned in the DFU or Labeling.
Document destiné a l’Europe, au Moyen-Orient et à l’Afrique.3
Consultation
Micro crochets mousse 90°
165mm 150mm
MCO805 2,0mm MCO950 0,8mm 3724027 1,5mm
MCO805A 2,5mm 3724028 2,0mm
3724029 2,5mm
Micro crochets mousse 45°
165mm
MCO807 1,0mm
Porte-coton
140mm
7719-2
Sonde stylet
110mm
7731
45°
90°
90° 90°
DayMarquet Legent
Detail view of the instrument
Title and/or product family
Instrument to a 1/1 scale except where mentioned
otherwise
Explanatory tablesee below
Title or subtitles
global complementary description
Product Ref.1 complementary description1
Product Ref.2 complementary description2
How to read the catalogue
Explanation of the table reference and complementary product description
DOCUMENT FOR USE IN EUROPE, MIDDLE-EAST AND AFRICA ONLY2
Diagnosis
7742-1 11mm
7742-2 13mm
7742-3 15mm
7881
125mm
7706MF
125mm
7882
7717C
7896-1 11mm
7896-2 13mm
7896-3 15mm
7746A(D) Petit
7746B(D) Grand
160mm
7706MF
2,5mm
(D) Distributed by Integra MicroFrance SAS (France)
Electrode cautery
Catheter probe
Spring speculum, Screw speculum
Diagnostic device
Air bag
13mm
15mm
Itard
Palmer Palmer-Piquet Vacher
Proetz
Causse
DOCUMENT FOR USE IN EUROPE, MIDDLE-EAST AND AFRICA ONLY3
Speculum with handle
160mm
7898
140mm
MCO237
Self-retaining
140mm
MCO233
140mm
7899
130mm
7897
Vienna
Hartmann
Tieck-Halle Beckman
DOCUMENT FOR USE IN EUROPE, MIDDLE-EAST AND AFRICA ONLY4
Speculum with handle
MCL171(D)(1)
CP949-55 55mm
CP949-45 45mm
CP949-75 75mm
CP624-55 55mm
CP624-45 45mm
CP624-65 65mm
CP624-75 75mm
75mm
MCEN2
CP624LF-75 75mm
MCL75
MCL174(D)(1)
MCL170(D)(1)
MCL173(D)(1)
MCL197(D)(1)
MCL38N(D)
(D) Distributed by Integra MicroFrance SAS (France) (1) Not a MEDICAL DEVICE
Self-retaining speculum with fiber optic - Cold light cable 220cm - Adapter for cold light cable
75mm55mm
CottleKillian Rouvier
Storz
Wolf
Storz
Wolf
Storz
Olympus
DOCUMENT FOR USE IN EUROPE, MIDDLE-EAST AND AFRICA ONLY5
Angled dissecting forceps
200mm
3711007
140mm
3711002
1,50x15mm
3711004
1,25x15mm
150mm
7726MF
1,10x12mm
7727
curette
7728
with teeth
160mm
3711103
1,50x14mm
120mm
7732-1
1,50x14mm
3711102
2x14mm
7733
curette
7734
with teeth
Gruenwald Lucae PolitzerLucae
DOCUMENT FOR USE IN EUROPE, MIDDLE-EAST AND AFRICA ONLY6
Angled forceps
Smooth jaws
7749
Serrated jaws
7750
Serrated jaws 1,7x4mm
3724265
Serrated jaws 10mm
MCEN18
7761-1
7761B-2
Spoon jaws Fenestrated spoon jaws
7761-1 7761-2 7761B-1 7761B-2
7,5mm 9,5mm 7,5mm 9,5mm
Spoon jaws Fenestrated spoon jaws
7761C1 7761C2 7761C3 7761BC1 7761BC2 7761BC3
7mm 9mm 11mm 7mm 9mm 11mm
7761C27761BC-2
Scale 1/2
Lubet-Barbon Lubet-Barbon
Corgill-HartmanRouvier
Brünings
Luc
Angled forceps, spoon jaws
100mm 100mm
100mm
110mm
DOCUMENT FOR USE IN EUROPE, MIDDLE-EAST AND AFRICA ONLY7
Syringe
Injection needles
7903-50-5(D)
50mm
Ø 0,5mm
Pack 12
Delivered with syringe
7779MF-2
Pack 6
7779MF-1
Pack 6
7779MF-3
7783-12
Pack 2
110mm
3714247
3714249
bayonet shaft
3734108
130mm
7779MF-5CC
3734107
for disposable syringe luer-lock 12cc
Chouard
Génia
(D) Distributed by Integra MicroFrance SAS (France)
Syringe
Grey washer Replacement tube for syringe White washer
Disposable syringe luer-lock
Injection needles
DOCUMENT FOR USE IN EUROPE, MIDDLE-EAST AND AFRICA ONLY8
Elevator, raspatory
160mm
MCO803
2,5mm
160mm
3714115
2mm
3714116
3mm
190mm
CP985
5mm
180mm
MCO305
8,5mm
185mm
CP611
5mm
220mm
CP625
220mm
CP626
240mm
CP627
McKenty
CottleHowarth
Freer
FleurySébileau
Lempert
DOCUMENT FOR USE IN EUROPE, MIDDLE-EAST AND AFRICA ONLY9
Suction tube elevator with finger control
230mm
MCEN187
3,5mm
Irrigation
200mm
CP337-1
5mm
200mm
SCP337A
3,5mm
190mm
CP337
3mm
180mm
CP1102
3,5mm
CP1103
Blunt
170mm
MCEN10
2,5mm
MALLEABLE
110mm
MCEN39
3mm
MALLEABLE
Orsel
Toriumi
Rouvier
Guillen Orsel
DOCUMENT FOR USE IN EUROPE, MIDDLE-EAST AND AFRICA ONLY10
Knife
120mm
1003IG(D)
160mm
1005I(D)
200mm
1003LI(D)
120mm
1004IG(D)
150mm
CP821
130mm
CP821C
Knife blades Pack 25
SM63(D) SM64(D) SM65(D)
CP821B 100mm
CP821C 130mm
CP821D 150mm
CP821E 190mm
Blades 11/15 23 SM63(D) SM64(D) SM65(D)
(D) Distributed by Integra MicroFrance SAS (France)
Scalpels
DOCUMENT FOR USE IN EUROPE, MIDDLE-EAST AND AFRICA ONLY11
Knife
200mm
CP622-4
4mm
160mm
CP333
150mm
3714163
135mm
3714173
Ballenger Joseph Freer Cottle
DOCUMENT FOR USE IN EUROPE, MIDDLE-EAST AND AFRICA ONLY12
Curved raspatory
195mm
3724059
6,5mm
150mm
7787-10
10mm
170mm
MCO979
6,5mm
180mm
MCO988
7,5mm
150mm
CP825
4mm
PlesterSébileauFarabeuf FleuryHeavy
DOCUMENT FOR USE IN EUROPE, MIDDLE-EAST AND AFRICA ONLY13
Curved raspatory
180mm
CP310
5mm
180mm
CP344A
5mm
180mm
CP344AT
5mm
180mm
CP310D
5mmstraight
180mm
CP310E
4mm
180mm
CP344B
7mm
180mm
CP344C
11mm
190mm
CP344D
7mm
190mm
CP344E
7mm
180mm
CP344BT
7mm
180mm
CP344CT
11mm
190mm
CP344DT
7mm
190mm
CP344ET
7mm
Sharp
Obwegeser-TessierObwegeserJoseph
DOCUMENT FOR USE IN EUROPE, MIDDLE-EAST AND AFRICA ONLY14
Retractor
140mm
7768-1
120mm
7768
145mm
CP628
5mm
110mm
CP941
210mm
3714018
140mm
CP822-12
12mm
CP822-10
10mm
CP822-14
14mm
180mm
CP17
3mm
CP17-1
2mm
145mm
CP17-3
2mm
CP17-2
3mm
HumbyGilliesFarabeuf DesmarresArmy navy Gillies
DOCUMENT FOR USE IN EUROPE, MIDDLE-EAST AND AFRICA ONLY15
Retractor
150mm
3714027
8mm
3714028
blunt
130mm
3714044
2mm
140mm
3714184
140mm
CP21-3
sharp
CP21A-3
blunt
150mm
7782-1-2
180mm
CP335
160mm
CP609
3 sharp prongs
3714032
3 blunt prongs
Senn-MillerBlair VolkmannKnapp Guthrie
DOCUMENT FOR USE IN EUROPE, MIDDLE-EAST AND AFRICA ONLY16
Retractor
80mm
CP340
110mm
CP341
95mm
CP331
110mm
3714179
125mm
CP803
120mm
CP338
130mm
CP339
ConverseClaoué Kilner
Converse Jost
DOCUMENT FOR USE IN EUROPE, MIDDLE-EAST AND AFRICA ONLY17
Retractor
130mm
3714187
170mm
CP306
130mm
3714182
130mm
3714183
160mm
3714181
160mm
CP23-10
CP23-4
4mm
CP23-6
6mm
CP23-8
8mm
CP23-10
10mm
CP23A-8
8mm
Cottle
Aufricht Fomon JosephCottle
DOCUMENT FOR USE IN EUROPE, MIDDLE-EAST AND AFRICA ONLY18
Retractor
220mm
CP630
200mm
3714180
200mm
3714681
190mm
3714684
160mm
CP632
170mm
CP947
Cottle Neivert Cottle-Neivert Ragnell Dufourmentel
DOCUMENT FOR USE IN EUROPE, MIDDLE-EAST AND AFRICA ONLY19
Malleable blade retractor, Double retractor blunt
210mm
CP818-8
140mm
CP984
140mm
CP984-1
160mm
7773
15x40mm
15x60mm
10mm
15x55mm
15x85mm
15mm
Malleable
Malleable
8mm 10mm 12mm 15mm 20mm
CP818-8 CP818-10 CP818-12 CP818-15 CP818-20
Dautrey Dautrey
DOCUMENT FOR USE IN EUROPE, MIDDLE-EAST AND AFRICA ONLY20
Mouth gag
140mm
7809MF
7821B
7805-11 7804-13
3734151
30mm
7805-11 11mm 160mm
7805-13 13mm 180mm
7804-9 9mm 140mm
7804-11 11mm 160mm
7804-13 13mm 180mm
3734059
with 3 blades
7821B 120mm
7821A 140mm
Scale 1/2
Masson Doyen
Seemann-Seiffert
Dingmann
Jennings
Denhardt
DOCUMENT FOR USE IN EUROPE, MIDDLE-EAST AND AFRICA ONLY21
Curette
160mm
CP302-4 4mm
CP302-5 5mm
CP302-6 6mm
CP302-8 8mm
200mm
3724043 1,5x3mm
3724044 2x3,5mm
3724045 2,5x4mm
3724046 3x4,5mm
3724047 4x5,5mm
Volkmann
DOCUMENT FOR USE IN EUROPE, MIDDLE-EAST AND AFRICA ONLY22
Mallet
180mm - 115g
3714350
185mm - 330g
7766
180mm
CP907 200g
3714105 2 nylon heads
180mm - 230g
CP300
Lombard
Copper
DOCUMENT FOR USE IN EUROPE, MIDDLE-EAST AND AFRICA ONLY23
Chisel
180mm
CP801-7 7mm
CP801-10 10mm
130mm
MCO214-13-10 1mm
MCO214-13-20 2mm
MCO214-13-40 4mm
MCO214-13-60 6mm
MCO214-13-80 8mm
160mm
3714053 4mm
150mm
CP823-5 5mm
150mm
CP824-5 5mm
Freer FleuryJost
DOCUMENT FOR USE IN EUROPE, MIDDLE-EAST AND AFRICA ONLY24
Osteotome
180mm
Curved Straight
CP304B-2 CP304-2
2mm
CP304-3
3mm
CP304B-4 CP304-4
4mm
CP304B-6 CP304-6
6mm
CP304B-8 CP304-8
8mm
CP304B-10 CP304-10
10mm
CP304B-12 CP304-12
12mm
180mm
CP304B-4
4mm
170mm
3714075
10mm
3714076
14mm
3714077
16mm
160mm
CP318
13mm
160mm
CP317
16mm
Aiach Pollet-Pech Rubin Marchac
DOCUMENT FOR USE IN EUROPE, MIDDLE-EAST AND AFRICA ONLY25
Guarded osteotome
180mm
CP316
180mm
CP802
180mm
CP315
180mm
CP305
180mm
3714097
180mm
CP315D
180mm
CP315G
CP305L
CP305R
3714098
3714099
Tessier Pech-MarchacJost ClaouéMarchac SilverLindas
DOCUMENT FOR USE IN EUROPE, MIDDLE-EAST AND AFRICA ONLY26
Double guarded osteotome
180mm
3714106
6.0x10mm
180mm
CP314-14
14mm
155mm
3714100
10mm
160mm
CP309-14-16
14 -16mm
CP309-8-12
8 - 12mm3714100
10mm
3714101
12mm
3714102
14mm
CP309-10-14
10 - 14mm
CP309-12-16
12 - 16mm
CP309-14-16
14 - 16mm
CP309-14-18
14 - 18mm
Mac-IndoeParkès Cinelli Robin
DOCUMENT FOR USE IN EUROPE, MIDDLE-EAST AND AFRICA ONLY27
Fine osteotome
190mm
3714071
4mm
3714071
4mm
3714072
6mm
3714073
9mm
3714074
12mm
195mm
CP808-6
6mm
195mm
CP806
6mm
190mm
CP807
5mm
200mm
CP313
2,5mm
200mm
3714094
4mm
10mm
20mm
30mm
40mm
50mm
60mm
70mm
200mm
CP313-1
3mm
200mm
3714095
Left
20mm
30mm
40mm
50mm
Cottle Anderson-NeivertBeckerCottle Cottle Cottle
DOCUMENT FOR USE IN EUROPE, MIDDLE-EAST AND AFRICA ONLY28
Saw - Straight rasp
190mm
3714162
36mm
190mm
3714674
38mmRight
170mm
CP301
10x45mm
170mm
CP301-1
8x35mm
180mm
CP810
8x30mm
190mm
3714673
38mmLeft
Joseph MaltzJoseph Maltz
DOCUMENT FOR USE IN EUROPE, MIDDLE-EAST AND AFRICA ONLY29
Curved rasp
200mm
CP1100
8.0x8mm
200mm
CP291
4x15mm
190mm
CP998-1
8x12mm
180mm
CP301-2
8x30mm
180mm
CP809
8x30mm
Diamond
160mm
CP975
160mm
CP975A
200mm
CP973
8x25mm
200mm
CP974
8x25mm
200mm
CP976
8x30mm
Toriumi BigotBelloc
Aufricht
Fomon
DOCUMENT FOR USE IN EUROPE, MIDDLE-EAST AND AFRICA ONLY30
Sure-grip tungsten rasp
3714152
7x30mm
5/6
CP301-10
7x38mm
3/4
CP1104
7x20mm
1/2
CP1105
7x20mm
3/4
CP301-4
7x38mm
CP301-5
7x38mm
CP301-9
7x12mm
8x22mm
Becker Rees GorneyBecker
DOCUMENT FOR USE IN EUROPE, MIDDLE-EAST AND AFRICA ONLY31
Nasal splint - Cartilage template - Cartilage crushing press
CP814-1
with tool CP814-3
CP814-2
30x50mm
AquaplastAQ1728(D)
75x75mm - Pack 10
Scale 1/2
3750012
CP814-3
Cartilage templateCP1109
80x90mm
Scale 1/2
(D) Distributed by Integra MicroFrance SAS (France)
Cartilage crushing press
Nasal splint
Cartilage template
Jost
Cottle
Toriumi
DOCUMENT FOR USE IN EUROPE, MIDDLE-EAST AND AFRICA ONLY32
Caliper, ruler, lacrimal probe, bone forceps
90mm
3740009
150mm
3740086
150mm
CP640
140mm
3740077
3/4
3740074
0000/000
3740075
00/0
3740076
1/2
3740077
3/4
3740078
5/6
3740079
7/8
20mm
Caliper
Ruler
Bone forceps with teeth Lacrimal probe
DOCUMENT FOR USE IN EUROPE, MIDDLE-EAST AND AFRICA ONLY33
Rongeur
130mm
3712200 1,5x5mm
3712201 Curved jaws
190mm
3712003 4mm
3712002 Straight jaws
7764
3mm
Lempert
Citelli
Friedman
DOCUMENT FOR USE IN EUROPE, MIDDLE-EAST AND AFRICA ONLY34
Rongeur
180mm
CP380-3 2mm
CP380-5 4mm
37122115mm
Ruskin
CP380-12mm
Straight jaws
160mm
CP380 2mm
CP380-2 Curved jaws
180mm
CP621 4x20mm
Beyer Jansen-Middleton
DOCUMENT FOR USE IN EUROPE, MIDDLE-EAST AND AFRICA ONLY35
Bone scissors, bone rongeur
180mm
3713063200mm
3713025
160mm
CP381
190mm
3712219Rowland
Ruskin
GorneyCaplan
DOCUMENT FOR USE IN EUROPE, MIDDLE-EAST AND AFRICA ONLY36
Septum forceps
240mm
7765
Small size jaws
Large size jaws
230mm
3711029
230mm
3711028
Scale 1/2
Martin Waksham Asch
DOCUMENT FOR USE IN EUROPE, MIDDLE-EAST AND AFRICA ONLY37
Small scissors, pointed
105mm
CP16-1 Curved blades
CP16 Straight blades
105mm
CP353
105mm
CP356
120mm
CP354A Curved blades
CP354 Straight blades
110mm
CP919A Curved blades
CP919 Straight blades
110mm
CP358A Curved blades
CP358 Straight blades
StreiffOffret
Joseph Joseph Fox
DOCUMENT FOR USE IN EUROPE, MIDDLE-EAST AND AFRICA ONLY38
Long scissors, pointed
150mm
CP355A CP355
Curved Straight
180mm
CP997
Curved
120mm
CP362
Curved
150mm
CP367-1 CP367
Curved Straight
Kilner-jost
JosephBrophyBoetcher
DOCUMENT FOR USE IN EUROPE, MIDDLE-EAST AND AFRICA ONLY39
Small scissors, blunt
120mm
CP637
Curved blades
110mm
CP363
Curved blades
110mm
CP922A
Curved blades
110mm
CP922
Straight blades
115mm
CP922B
Curved blades
BregeatShea
Stevens Stevens
Stevens
DOCUMENT FOR USE IN EUROPE, MIDDLE-EAST AND AFRICA ONLY40
Long scissors, blunt
160mm
CP921
Curved
130mm
CP616-13
Curved
150mm
CP355C
Curved
150mm
CP365
Curved
150mm
CP616-15
Curved
Joseph
LégerRagnell
Reynolds
DOCUMENT FOR USE IN EUROPE, MIDDLE-EAST AND AFRICA ONLY41
Small Metzenbaum scissors
110mm
CP351-7 Curved blades
CP351-6 Straight blades
150mm
CP931-1 Curved blades
CP931 Straight blades
150mm
CP351-3 Curved blades
CP351-2 Straight blades
150mm
3741065 Curved blades
3741071 Delicate blades
Delicate scissors Tungsten blades
Metzenbaum
DOCUMENT FOR USE IN EUROPE, MIDDLE-EAST AND AFRICA ONLY42
Large Metzenbaum scissors
Fine Standard FineStandard Standard
200mm
CP931-5
Curved
180mm
CP351-1
Curved - standard
Curved - tungsten blades
180mm 230mm
3741067 3741075
180mm
CP931-3
Curved
200mm
CP351-5
Curved
DOCUMENT FOR USE IN EUROPE, MIDDLE-EAST AND AFRICA ONLY43
Mayo scissors
Mayo-Stille 150mm 170mm
Curved blades 3741080 3741082
Straight blades 3741081 3741083
150mm
3741057
Scissors, straight sharp blades
Mayo 150mm 170mm
Curved blades CP352-1 CP352-3
Straight blades CP352 CP352-2
CP352-1
CP352-3
Mayo Mayo-Stille
DOCUMENT FOR USE IN EUROPE, MIDDLE-EAST AND AFRICA ONLY44
Angled scissors
100mm
CP1106
Serrated blades
100mm
CP348
150mm
CP359
Serrated blades
150mm
CP614
140mm
CP612
Curved
140mm
CP635
140mm
CP613
Becker-Converse Converse
Cottle-Pech
Fomon
Fomon
Cottle
Pellegrini
DOCUMENT FOR USE IN EUROPE, MIDDLE-EAST AND AFRICA ONLY45
Scissors, serrated blades
120mm
713T
Wire cutting dural scissors
serrated tungsten blades
150mm
CP360
Straight
170mm
CP615-1
Straight
180mm
CP350
Straight
170mm
CP615-3
Right curved
170mm
CP615-2
Left curved
Heymann-Klossek
Bebee
DOCUMENT FOR USE IN EUROPE, MIDDLE-EAST AND AFRICA ONLY46
Small scissors bayonet blades
160mm
CP914
Curved
120mm
CP364
Curved
150mm
3741011
Curved - serrated blades
115mm
3741017
Curved Tungsten serrated blades
Serrated blades
Tungsten serrated blades
Tessier Kaye Kaye
DOCUMENT FOR USE IN EUROPE, MIDDLE-EAST AND AFRICA ONLY47
Large scissors bayonet blades
200mm
CP357-2
Curved
180mm
3741019
CurvedTungsten serrated blades
190mm
3741016
Curved
Tungsten serrated blades
160mm
CP357-1
Curved
190mm
3741015
Straight
Gorney Kaye
DOCUMENT FOR USE IN EUROPE, MIDDLE-EAST AND AFRICA ONLY48
Fine dissecting forceps
110mm
CP37
Oblique teeth and plateform
110mm
CP938-1
Horizontal teeth and plateform
110mm
CP332
120mm
7831A-12
Jaws 1,5mm
120mm
CP406
Jaws 1mm
120mm
7833A-12
Jaws 1,5mm
120mm
CP414
Jaws 1mm
120mm
CP400-1
Jaws 5x5
Dissecting forceps serrated jaws Dissecting forceps with teeth
Dissecting forceps with teeth and plateform
Castroviejo
DOCUMENT FOR USE IN EUROPE, MIDDLE-EAST AND AFRICA ONLY49
Adson dissecting forceps
Adson-Tubiana Adson Adson-Brown
M832 M833 CP604 CP605 3740027 CP606A CP606 3740038
Jaws 1mm Jaws 1mm Jaws 1,5mm Jaws 1,5mm Jaws 1mm Jaws 1,5mm Jaws 7x7 Jaws 7x7
serrated jaws with teeth serrated jaws with teethserrated jaws
with teethtungsten jaws angled jaws
CP604-15
Jaws 1,5mm
Serrated
CP605-15
Jaws 1,5mm
with teeth
CP606-15
Jaws 7x7
150mm
120mm
Adson
Adson-Brown
Adson
DOCUMENT FOR USE IN EUROPE, MIDDLE-EAST AND AFRICA ONLY50
Medium dissecting forceps
Debakey Barraya
150mm 140mm
CP415 7831A-15 CP407 7833A-15 CP988-15 CP933-14 CP400
Jaws 1,0mm Jaws 1,5mm Jaws 1,0mm Jaws 1,5mm Jaws 1,5mm Jaws 3x4 Jaws 5x5
140mm
CP934
Oblique teeth
140mm
CP934-1
serrated jaws
Mac-Indoe
Mac-Indoe
DOCUMENT FOR USE IN EUROPE, MIDDLE-EAST AND AFRICA ONLY51
Medium dissecting forceps
150mm
CP345
150mm
3740015
2mm
150mm
3740019
2mm
160mm
CP933-16
3x4
160mm
CP401
5x6
170mm
CP936
110mm
3740067
14mm
Cottle
Précelle Barraya Claoué Mac-Indoe
DOCUMENT FOR USE IN EUROPE, MIDDLE-EAST AND AFRICA ONLY52
Dissecting forceps, 180mm
1.5mm
7831A-18
1.5mm
CP988-18
1.0mm
CP409
1x2
1.5mm
7833A-18
1x2
3.0mm
3740090
1x2
1.5mm
CP933-18
3x4
6x6
CP400-2
Debakey Potts-Smith Barraya
DOCUMENT FOR USE IN EUROPE, MIDDLE-EAST AND AFRICA ONLY53
Dissecting forceps, 200mm
210mm
3711100
1.0mm
7832
2.0mm
7831A-20
1.5mm
CP988-20
2.0mm
7833A-20
1x2
DebakeyGruenwald-Jansen
DOCUMENT FOR USE IN EUROPE, MIDDLE-EAST AND AFRICA ONLY54
Medium bipolar dissecting forceps
110mm 120mm 160mm 200mm
CP392-1R CP604BR CP605BR CP392-2R CP392-8R CP392BI CP392BS
Jaws 1x8mm Serrated jaws with teeth Jaws 1x8mm Jaws 1x8mm Jaws 0,5x5mm Jaws 0,5x5mm
CP393-2
Bowa Emc Lamidey Valleylab
CP393-3
Erbe Storz Wolf
CP393-4
Aesculap Berchtold Martin
Bipolar cables - 4,5 m Magnan
Adson
DOCUMENT FOR USE IN EUROPE, MIDDLE-EAST AND AFRICA ONLY55
Bipolar dissecting forceps, 200mm
CP393-2
Bowa Emc Lamidey Valleylab
CP393-3
Erbe Storz Wolf
CP393-4
Aesculap Berchtold Martin
Bipolar cables - 4,5 m
CP392-3R CP392-10R CP392-5R CP392-5R
Straight Smooth jaws
1x8mm
Angled Smooth jaws
1x8mm
Bayonet Smooth jaws
1x8mm
Bayonet Angled jaws
1x8mm
DOCUMENT FOR USE IN EUROPE, MIDDLE-EAST AND AFRICA ONLY56
Medium monopolar dissecting forceps
Monopolar cables - 4,5 m
CP391EErbe Storz Wolf
CP391MAesculap Berchtold Martin
Erbe T Serie LamideyCP391V
Bowa Emc Lamidey Valleylab
110mm 120mm 160mm
CP390-1 CP604M CP605M CP390-2 CP390-8
Jaws 1x8mm Serrated jaws with teeth Jaws 1x8mm with teeth
Adson
DOCUMENT FOR USE IN EUROPE, MIDDLE-EAST AND AFRICA ONLY57
Large monopolar dissecting forceps
Monopolar cables 4.5 m
CP391EErbe Storz Wolf
CP391MAesculap Berchtold Martin
Erbe T Serie Lamidey
CP391VBowa Emc Lamidey Valleylab
230mm L 200mm 230mm L 200mm 230mm L 200mm
CP390-3 CP390-5 CP390-7
Smooth jaws 1x8mm Angled jaws 1x8mm Smooth jaws 1x8mm
Chambon
290mm L 260mm
CP390L26
Smooth jaws 1x8mm
DOCUMENT FOR USE IN EUROPE, MIDDLE-EAST AND AFRICA ONLY58
Tungsten needle-holder Large tungsten needle-holder
130mm
3744027
Jaws 1,0mm
130mm
703T 704T
Serrated jaws Smooth jaws
Crile-Wood Mayo-Hégar
150mm
702T 714T
130mm
CP1107
Diamond jaws
702T
703T
CP1107
3744027
Halsey Ryder
Crile-Wood Becker
DOCUMENT FOR USE IN EUROPE, MIDDLE-EAST AND AFRICA ONLY59
Large tungsten needle-holder
Crile-Wood
200mm
720T
Mayo-Hegar
200mm
3744032
Crile-Wood
180mm
701T
Mayo-Hegar
180mm
3744031
720T 701T
DOCUMENT FOR USE IN EUROPE, MIDDLE-EAST AND AFRICA ONLY60
Stratte needle-holder - Needle-holder scissors Fine haemostatic forceps
StratteNeedle-holder
210mm
7945T
Olsen-WebsterNeedle-holder scissors
120mm
3744019
3744019
7945T
DOCUMENT FOR USE IN EUROPE, MIDDLE-EAST AND AFRICA ONLY61
Fine haemostatic forceps
95mm
3755111 3755110
Curved Straight
without teeth
120mm
3755102 3755101
Curved Straight
without teeth
120mm
P761-7 P761-8
Straight Curved
with teeth
140mm
7867-1
Straight
Without teeth
140mm
7867-4 7867-3
Curved Straight
with teeth
140mm
7867-2
Curved
Without teeth
7867-1 P761-7
3755102
3755111
Hartmann-Mosquito Halsted-Mosquito
Leriche HalstedLeriche
DOCUMENT FOR USE IN EUROPE, MIDDLE-EAST AND AFRICA ONLY62
Medium haemostatic forceps Strong haemostatic forceps
P764-3
P762-23755117
3755133
140mm - Without teeth
Curved Straight
P762-2 3755114
160mm
P762-4
140mm - Without teeth
Curved Straight
3755117 3755116
170mm
3755133
Straight without teeth
165mm
3755136
Curved without teeth
Kocher
Straight without teeth
140mm 160mm
P764-1 P764-5
Kocher
Straight with teeth
140mm 160mm 180mm
P764-3 P764-7 P764-11
Crile
Rochester-Péan
Kocher
Kelly
DOCUMENT FOR USE IN EUROPE, MIDDLE-EAST AND AFRICA ONLY63
Strong haemostatic forceps
P765-14
P763
7866-13
3755000
Towel clamp
90mm
3755000
120mm
3755001
With teeth, «T» tip
130mm
P763
With teeth
130mm
7866-13
AllisGrasping forceps
3755161
150mm4x5 teeth
3755160
140mm3x4 teeth
3755162
150mm 5x6 teeth
Towel clamp
130mm
3755002
Péan TerrierForceps, serrated jaws
140mm 130mm
P765-14 P769
160mm
P765-16
Backauss Martel
Péan
Chaput
Backauss-Roeder
DOCUMENT FOR USE IN EUROPE, MIDDLE-EAST AND AFRICA ONLY64
Strong haemostatic forceps Suction tube with finger control
Grasping forceps
130mm
P771
Forceps with teeth
160mm
3755100
Haemostatic forceps heart serrated jaws
180mm
3755152
Heart Jaws
Haemostatic forceps heart serrated jaws
160mm
P770
Heart Jaws
Babcock Ombredanne
Foerster
DOCUMENT FOR USE IN EUROPE, MIDDLE-EAST AND AFRICA ONLY65
Suction tube with finger control
Working length 120mm
MCO770-3-5 3,5mm
MCO770-1-5 1,5mm
MCO770-2-0 2,0mm
MCO770-2-5 2,5mm
MCO770-3-0 3,0mm
MCO770-3-5 3,5mm
MCO770-4-0 4,0mm
Working length 120mm
MCEN770J40 4,0mm
MCEN770J30 3,0mm
Working length 120mm
MCO771-2-5 2,5mm
MCO771-3-0 3,0mm
MCO771-4-0 4,0mm
Working length 110mm
CP330-3-0 3,0mm
CP330-4-0 4,0mm
1,5mm
2,0mm
2,5mm
3,0mm
3,5mm
4,0mm
Wertheimer LempertJankowski
DOCUMENT FOR USE IN EUROPE, MIDDLE-EAST AND AFRICA ONLY66
Otoplasty
CP85L
CP85R
Otoabrader rasps
160mm - 2,0x8,0mm
CP85L CP85R
Left curved Right curved
Elevators
160mm - 2,0x8,0mm
CP85AL CP85AR
Left curved Right curved
CP85AR
CP85AL
Elevators
Otoabrader rasps
Stenstrom
Stenstrom
DOCUMENT FOR USE IN EUROPE, MIDDLE-EAST AND AFRICA ONLY67
Maxillary
Condyle retractor Round sharp hook
130mm 260mm - L 130mm
CP501B CP986
Scale 2/3 Working length «L»
Ginestet
DOCUMENT FOR USE IN EUROPE, MIDDLE-EAST AND AFRICA ONLY68
Maxillary
Morselizer guard device
3711034
Expansion forceps
180mm
CP521
Fascia press
190mm
3711032
Tessier
DOCUMENT FOR USE IN EUROPE, MIDDLE-EAST AND AFRICA ONLY69
Ciseaux à lifting
180mm
3741054
blunt tip
200mm
CP369-2
CP369-3
straight scissors spatula
13,0mm
CP369-2
straight scissors spatula
8,5mm
CP369-1
straight scissors spatula
5,5mm
TrepsatFreeman
DOCUMENT FOR USE IN EUROPE, MIDDLE-EAST AND AFRICA ONLY70
Lifting
180mm
CP829T
with ratchet
160mm
CP830
150mm
CP994
Forceps with teeth
Facelift forceps with teethServantAssumpçao Pitanguy
DOCUMENT FOR USE IN EUROPE, MIDDLE-EAST AND AFRICA ONLY71
Lifting
Facelift blunt retractor Facelift sharp retractor 4 prongs Facelift sharp retractor
190mm 180mm 80mm
CP819-12 CP819-15 CP826 CP826-1 3714266
85x12mm 85x15mm 35mm 20mm Thimble
Facelift retractorMillardFreeman Freeman
DOCUMENT FOR USE IN EUROPE, MIDDLE-EAST AND AFRICA ONLY72
Endobrowlift
260mm
3747003
Periostal spreader
255mm
3747004
Arcus marginalis dissector
265mm
3747007
Parietal periostal elevator
240mm
3747008
Frontotemporal dissector, straight
Forehead scissors Forehead grasping forceps
3747012 3747014 3747017 3747031
Right curved Left curved Left curved Right curved
L 125 mm L 125mm L 125mm L 125mm
125mm
Scale 1/3
Working length «L»Spreader, Dissector, Elevator
Forehead scissors, Forehead grasping forceps
DOCUMENT FOR USE IN EUROPE, MIDDLE-EAST AND AFRICA ONLY73
Endobrowlift
Forehead elevator half curved - 235mm
3747019Elevator 1
3747021Elevator 3
Forehead elevator suction tube - 235mm
3747025
Sterilization tray
3747108
Scale 1/2
Photos for illustration purposes, unscaled
Forehead elevator
Sterilization case
DOCUMENT FOR USE IN EUROPE, MIDDLE-EAST AND AFRICA ONLY74
Breast
Breast aerola marker Scale 1/1
CP980-45
CP980-35 Ø 35mm
CP980-40 Ø 40mm
CP980-45 Ø 45mm
CP980-50 Ø 50mm
CP980-55 Ø 55mm
Breast aerola marker - Ø 38/42mm Scale 1/1
CP961 double serrated CP961-1 double sharp
Scale 1/3
Working length «L»
320mm - L 200mm
CP845
Spatulated elevator
Breast areola marker
Slamia
Dufourmentel
DOCUMENT FOR USE IN EUROPE, MIDDLE-EAST AND AFRICA ONLY75
Breast
290mm
CP981
370mm - L 250mm
A Gauche
CP991L
A Droite
CP991R
Scale 1/3
Breast tensor
Breast curved elevator
Mole
Agris-Dingmann
DOCUMENT FOR USE IN EUROPE, MIDDLE-EAST AND AFRICA ONLY76
Micro surgery
Vascular clamp
MCM9(D)
30mm
Irrigation tube
20°
MCM10-0-5 Ø 0,5mmL 30mm
MCM10-1-0 Ø 1,0mm
Vascular clamp - 55mm
MCM13
Medium
MCM13 L 13mm
Small
MCM13-1 L 13mm
Jewelers forceps
130mm 120mm 110mm 110mm
MCM973D3 n°3 3740068 n°1 3740071 n°5 3740072
MCM973D5 n°5 3740069 n°3 Angled jaws
Micro dissecting forceps - 150mm
MCM4BISR
MCM4BISRTeeth and plateform
MCM4RSmooth jaws with plate
Working length «L»
Gilbert O’Brien
DOCUMENT FOR USE IN EUROPE, MIDDLE-EAST AND AFRICA ONLY77
Micro surgery
Micro scissors
Vanas
MCM7BISR150mm
MCM7BISR
8,0mmblunt curved
Vanas
MCM7R
8,0mmstraight serrated blades
MCM970
8,0mmAtraumatic curved
Needle-holder
O’Brien Castroviejo
MCM12R150mm
with ratchet3752011140mm
MCM12R 3752011
5,0x0.30mmsmooth curved jaws
10,0mmsmooth curved jaws
Barraquer-Comtet Castroviejo
MCM1R 3752008
8,0mmsmooth straight jaws
10,0mmsmooth straight jaws
MCEN136SC
290x175x55mm - 270x160x35mm
MCM25-3
210x130mm
DOCUMENT FOR USE IN EUROPE, MIDDLE-EAST AND AFRICA ONLY78
Stainless steel cup, universal tray, oiling Spray
Cup
7876-60(D) 60mm
7876-80(D) 80mm
7876-100(D) 100mm
7876-120(D) 120mm
7876-160(D) 160mm
Tray
7872-24(D) 240x180mm
Surgical instrument oil
MCO731(D)
7872-24(D)
Scale 1/2
7876-60
(D) Distributed by Integra MicroFrance SAS (France)
Surgical instrument oil
Stainless steel tray
Stainless steel cup
DOCUMENT FOR USE IN EUROPE, MIDDLE-EAST AND AFRICA ONLY79
Sterilization cases
7874MF-22
240x105x45mm 220x100x40mm
7874MF-25
270x155x65mm 250x150x60mm
7874MF-34
380x205x85mm 340x200x80mm
7874MF-40
440x205x95mm - 400x200x90mm
Scale 1/5
DOCUMENT FOR USE IN EUROPE, MIDDLE-EAST AND AFRICA ONLY80
Plastic sterilization case
3717012
340x255x74mm
MCEN136SC
290X175X55mm 270X160X35mm
3717011
530x250x140mm
Scale 1/4
DOCUMENT FOR USE IN EUROPE, MIDDLE-EAST AND AFRICA ONLY81
Plastic sterilization case
3717002
520x250x28mm
MCOS10SC
385x256x128mm
Scale 1/4
Document for use in Europe, Middle-East and Africa only82
Numerical INDEX
11003IG(D) ................................................ 101003LI(D) ................................................. 101004IG(D) ................................................ 101005I(D) ................................................... 10
33711002 .................................................... 53711004.................................................... 53711007 .................................................... 53711028 .................................................. 363711029 .................................................. 363711032 ..................................................683711034 ..................................................683711100 .................................................. 533711102..................................................... 53711103 ..................................................... 53712002 ................................................. 333712003 ................................................. 333712200 ................................................. 333712201 .................................................. 333712211 ................................................... 343712219 .................................................. 353713025 .................................................. 353713063.................................................. 353714018 ...................................................143714027...................................................153714028 ..................................................153714032 ..................................................153714044 ..................................................153714053 ................................................. 233714071 .................................................. 273714072 ................................................. 273714073 .................................................. 273714074 .................................................. 273714075 .................................................. 243714076 ................................................. 243714077 .................................................. 243714094 ................................................. 273714095 ................................................. 273714097 ................................................. 253714098 ................................................. 253714099 ................................................. 253714100.................................................. 263714101 .................................................. 263714102 .................................................. 263714105 .................................................. 223714106 .................................................. 263714115 .....................................................83714116 .....................................................83714152 ..................................................303714162 .................................................. 283714163 ................................................... 113714173 .................................................... 11
3714179 ...................................................163714180 ...................................................183714181 ....................................................173714182 ...................................................173714183 ...................................................173714184 ...................................................153714187 ...................................................173714247 .................................................... 73714249 ................................................... 73714266 ..................................................713714350 ................................................. 223714673 .................................................. 283714674 .................................................. 283714681 ...................................................183714684 ..................................................183717002 ..................................................813717011 ...................................................803717012 ..................................................803724043 ..................................................213724044 ..................................................213724045 ..................................................213724046 .................................................213724047 ..................................................213724059 ..................................................123724265 ...................................................63734059 .................................................203734107 .................................................... 73734108 ................................................... 73734151 ..................................................203740009 ................................................ 323740015 ..................................................513740019 ..................................................513740027 .................................................493740038 .................................................493740067 ..................................................513740068 ................................................ 763740069 ................................................ 763740071 ................................................. 763740072 ................................................. 763740074 ................................................. 323740075 ................................................. 323740076 ................................................. 323740077 ................................................. 323740078 ................................................. 323740079 ................................................. 323740086 ................................................ 323740090 ................................................ 523741011 ...................................................463741015 .................................................. 473741016 .................................................. 473741017 ..................................................463741019 .................................................. 473741054..................................................693741057 .................................................. 433741065 ..................................................41
3741067 .................................................. 423741071 ...................................................413741075 .................................................. 423741080 ................................................. 433741081 .................................................. 433741082 ................................................. 433741083 .................................................. 433744019 .................................................603744027 ................................................. 583744031 .................................................. 593744032 ................................................. 593747003 ................................................. 723747004 ................................................. 723747007 ................................................. 723747008 ................................................. 723747012 .................................................. 723747014 .................................................. 723747017 .................................................. 723747019 .................................................. 733747021 .................................................. 733747025 ................................................. 733747031 .................................................. 723747108 .................................................. 733750012 ..................................................313752008 ................................................ 773752011 .................................................. 773755000 ................................................ 633755001 ................................................. 633755002 ................................................ 633755100 .................................................643755101 .................................................. 613755102 ................................................. 613755110 .................................................. 613755111 ................................................... 613755114 ..................................................623755116 ..................................................623755117 ...................................................623755133 ..................................................623755136 ..................................................623755152 ..................................................643755160 ................................................. 633755161 .................................................. 633755162 .................................................. 63
7701T ....................................................... 59702T ....................................................... 58703T ....................................................... 58704T....................................................... 58713T ........................................................ 45714T ....................................................... 58720T ....................................................... 597706MF ...................................................27717C........................................................27726MF.................................................... 5
(D) Distributed by Integra MicroFrance SAS (France)
Document for use in Europe, Middle-East and Africa only83
Numerical INDEX
7727 ...........................................................57728 ..........................................................57732-1 .......................................................57733 ...........................................................57734 ..........................................................57742-1 .......................................................27742-2 .......................................................27742-3 .......................................................27746A(D) .....................................................27746B(D) .....................................................27749 ..........................................................67750 ..........................................................67761-1 ........................................................67761-2 .......................................................67761B-1......................................................67761B-2 .....................................................67761BC1 ....................................................67761BC2 ....................................................67761BC3 ....................................................67761C1 .......................................................67761C2 ......................................................67761C3 ......................................................67764 ........................................................ 337765 ........................................................367766 ........................................................227768 ........................................................ 147768-1 ..................................................... 147773 ......................................................... 197779MF-1 ................................................. 77779MF-2 ................................................. 77779MF-3 ................................................. 77779MF-5CC ............................................ 77782-1-2 ..................................................157783-12 ..................................................... 77787-10 ................................................... 127804-9 ....................................................207804-11 ...................................................207804-13 ...................................................207805-11 ...................................................207805-13 ...................................................207809MF ..................................................207821A ......................................................207821B ......................................................207831A-12 .................................................487831A-15 .................................................507831A-18 .................................................527831A-20 ................................................ 537832 ........................................................ 537833A-12 .................................................487833A-15 .................................................507833A-18 .................................................527833A-20 ................................................ 537866-13 ................................................... 637867-1 ..................................................... 617867-2..................................................... 61
7867-3 ..................................................... 617867-4 .................................................... 617872-24(D)................................................ 787874MF-22 .............................................797874MF-25 .............................................797874MF-34 .............................................797874MF-40 .............................................797876-60(D) ............................................... 787876-80(D) ............................................... 787876-100(D) ............................................. 787876-120(D) .............................................. 787876-160(D).............................................. 787881 ...........................................................27882 ..........................................................27896-1 .......................................................27896-2 ......................................................27896-3 ......................................................27897 .......................................................... 37898 .......................................................... 37899 .......................................................... 37903-50-5(D) ............................................. 77945T ..................................................... 60
AAQ1728(D) .................................................31
CCP16 ........................................................ 37CP16-1 ..................................................... 37CP17 ........................................................ 14CP17-1 ..................................................... 14CP17-2..................................................... 14CP17-3 ..................................................... 14CP21-3 .....................................................15CP21A-3 ...................................................15CP23-4 .....................................................17CP23-6 .....................................................17CP23-8 .....................................................17CP23-10 ...................................................17CP23A-8 ..................................................17CP37 ........................................................48CP85L .....................................................66CP85R .....................................................66CP291 ......................................................29CP300 .....................................................22CP301 ...................................................... 28CP301-1 ................................................... 28CP301-2 ..................................................29CP301-4 ..................................................30CP301-5 ..................................................30CP301-9 ..................................................30CP301-10 ................................................30CP302-4 ................................................. 21CP302-5 ................................................. 21
CP302-6 ................................................. 21CP302-8 ................................................. 21CP304-2 ................................................. 24CP304-3 ................................................. 24CP304-4 ................................................. 24CP304-6 ................................................. 24CP304-8 ................................................. 24CP304-10 ............................................... 24CP304-12 ................................................ 24CP304B-2 ............................................... 24CP304B-4 ............................................... 24CP304B-6 ............................................... 24CP304B-8 ............................................... 24CP304B-10 ............................................. 24CP304B-12 ............................................. 24CP305 ..................................................... 25CP305L ................................................... 25CP305R ................................................... 25CP306 ......................................................17CP309-8-12 ............................................26CP309-10-14 ..........................................26CP309-12-16 ..........................................26CP309-14-16 ..........................................26CP309-14-18 ..........................................26CP310 .......................................................13CP310D ....................................................13CP310E.....................................................13CP313 ...................................................... 27CP314-14 .................................................26CP315 ...................................................... 25CP315D ................................................... 25CP315G ................................................... 25CP316 ...................................................... 25CP317 ...................................................... 24CP318 ...................................................... 24CP330-3-0..............................................65CP330-4-0 .............................................65CP331 ...................................................... 16CP332 ......................................................48CP333 ....................................................... 11CP335 .......................................................15CP337 ........................................................9CP338 ...................................................... 16CP339 ..................................................... 16CP340 ..................................................... 16CP341 ...................................................... 16CP344A ....................................................13CP344AT ..................................................13CP344B ....................................................13CP344BT ..................................................13CP344C ....................................................13CP344CT .................................................13CP344D ...................................................13CP344DT .................................................13CP344E ....................................................13
(D) Distributed by Integra MicroFrance SAS (France)
Document for use in Europe, Middle-East and Africa only84
Numerical INDEX
CP344ET ..................................................13CP345 ..................................................... 51CP348 .....................................................44CP350 .....................................................45CP351-1 ...................................................42CP351-2 .................................................. 41CP351-3 .................................................. 41CP351-5 ..................................................42CP351-6 .................................................. 41CP351-7 ................................................... 41CP352...................................................... 43CP352-1 .................................................. 43CP352-2 .................................................. 43CP352-3 .................................................. 43CP353 ...................................................... 37CP354...................................................... 37CP354A ................................................... 37CP355 ...................................................... 38CP355A ................................................... 38CP355C ...................................................40CP356 ..................................................... 37CP357-1 ................................................... 47CP357-2 .................................................. 47CP358...................................................... 37CP358A ................................................... 37CP359 .....................................................44CP360 .....................................................45CP362 ..................................................... 38CP363 ......................................................39CP364 .....................................................46CP365 .....................................................40CP367 ...................................................... 38CP369-1 ..................................................69CP369-2 .................................................69CP369-3..................................................69CP380 ..................................................... 34CP380-1 .................................................. 34CP380-2 ................................................. 34CP380-3 ................................................. 34CP380-5 ................................................. 34CP381 ...................................................... 35CP390-1 ..................................................56CP390-2 .................................................56CP390-3 ................................................. 57CP390-5 ................................................. 57CP390-7 ................................................. 57CP390-8 .................................................56CP390L26 .............................................. 57CP391E ............................................... 56,57CP391M ............................................. 56,57CP391V............................................... 56,57CP392-1R ................................................ 54CP392-2R ............................................... 54CP392-8R ............................................... 54CP392BI .................................................. 54
CP392BS ................................................. 54CP393-2 ............................................. 54,55CP393-3 ............................................. 54,55CP393-4 ............................................. 54,55CP400 ................................................50,52CP400-1 .................................................48CP401 ..................................................... 51CP406 .....................................................48CP407 .....................................................50CP409 .....................................................52CP414 ......................................................48CP415 ......................................................50CP501B ................................................... 67CP521 ......................................................68CP604 .....................................................49CP604-15 ...............................................49CP604BR ................................................ 54CP604M .................................................56CP605 .....................................................49CP605-15 ................................................49CP605BR ................................................ 54CP605M .................................................56CP606 ....................................................49CP606-15 ...............................................49CP606A ..................................................49CP609 .....................................................15CP611 ........................................................8CP612 ......................................................44CP613 ......................................................44CP614 ......................................................44CP615-1 ...................................................45CP615-2 ..................................................45CP615-3 ..................................................45CP616-13 .................................................40CP616-15.................................................40CP621 ...................................................... 34CP622-4 .................................................. 11CP624-45 .................................................4CP624-55 .................................................4CP624-65 .................................................4CP624-75 ..................................................4CP624LF-75 ..............................................4CP625 .......................................................8CP626 .......................................................8CP627 .......................................................8CP628 ..................................................... 14CP630 ......................................................18CP632 ......................................................18CP635 .....................................................44CP637 ......................................................39CP640 ..................................................... 32CP801-7 .................................................. 23CP801-10 ................................................ 23CP802 ..................................................... 25CP803 ..................................................... 16
CP806 ..................................................... 27CP807 ..................................................... 27CP808-6 ................................................. 27CP809 .....................................................29CP810 ..................................................... 28CP814-1 ....................................................31CP814-2 ...................................................31CP814-3 ...................................................31CP818-8 .................................................. 19CP818-10 ................................................ 19CP818-12 ................................................. 19CP818-15 ................................................. 19CP818-20 ................................................ 19CP819-12 .................................................71CP819-15..................................................71CP821 ...................................................... 10CP821B .................................................... 10CP821C ................................................... 10CP821D ................................................... 10CP821E .................................................... 10CP822-10 ................................................ 14CP822-12 ................................................ 14CP822-14 ................................................ 14CP823-5 .................................................. 23CP824-5 .................................................. 23CP825...................................................... 12CP826 ......................................................71CP826-1 ...................................................71CP829T ...................................................70CP830 .....................................................70CP845 ..................................................... 74CP907 .....................................................22CP914 ......................................................46CP919 ..................................................... 37CP919A ................................................... 37CP921 ......................................................40CP922 .....................................................39CP922A ...................................................39CP922B ...................................................39CP931 ...................................................... 41CP931-1 ................................................... 41CP931-3 ..................................................42CP931-5 ..................................................42CP933-14 ................................................50CP933-16 ................................................ 51CP933-18 ................................................52CP934 .....................................................50CP934-1 ..................................................50CP936 ..................................................... 51CP938-1 ..................................................48CP941 ...................................................... 14CP947 ......................................................18CP949-45 .................................................4CP949-55 .................................................4CP949-75 .................................................4
(D) Distributed by Integra MicroFrance SAS (France)
Document for use in Europe, Middle-East and Africa only85
Numerical INDEX
CP961 ...................................................... 74CP961-1 .................................................. 74CP973 ......................................................29CP974 ......................................................29CP975 .....................................................29CP975A ...................................................29CP976 .....................................................29CP980-35 ............................................... 74CP980-40 .............................................. 74CP980-45 ............................................... 74CP980-50 ............................................... 74CP980-55 ............................................... 74CP981 ...................................................... 75CP984 ..................................................... 19CP984-1 .................................................. 19CP985 .......................................................8CP986 ..................................................... 67CP988-15 ................................................50CP988-18 ................................................52CP988-20 ............................................... 53CP991L ................................................... 75CP991R ................................................... 75CP994 .....................................................70CP997 ..................................................... 38CP998 .....................................................29CP1100 ....................................................29CP1102 ......................................................9CP1103 ......................................................9CP1104 ....................................................30CP1105 ....................................................30CP1106 ....................................................44CP1107 .................................................... 58CP1109 .....................................................31
MM832 .......................................................49M833 .......................................................49MCEN2 .....................................................4MCEN10 ...................................................9MCEN18 ...................................................6MCEN39 ...................................................9MCEN136SC ..................................... 77,80MCEN187 .................................................9MCEN770J30 .........................................65MCEN770J40 .........................................65MCL38N(D) ................................................4MCL75 ......................................................4MCL170(D)(1) ...............................................4MCL171(D)(1) ................................................4MCL173(D)(1) ................................................4MCL174(D)(1) ................................................4MCL197(D)(1) ...............................................4MCM1R ................................................... 77MCM4BISR ............................................ 76
MCM4R .................................................. 76MCM7BISR............................................. 77MCM7R .................................................. 77MCM9(D) ................................................. 76MCM10-0-5 ........................................... 76MCM10-1-0 ........................................... 76MCM12R ................................................ 77MCM13 ................................................... 76MCM13-1 ................................................ 76MCM25-3 ............................................... 77MCM970 ................................................ 77MCM973D3 ............................................ 76MCM973D5 ........................................... 76MCO214-13-10 ....................................... 23MCO214-13-20 ...................................... 23MCO214-13-40 ...................................... 23MCO214-13-60 ...................................... 23MCO214-13-80 ...................................... 23MCO233 ................................................... 3MCO237 ................................................... 3MCO305 ...................................................8MCO731(D) ............................................... 78MCO770-1-5 ..........................................65MCO770-2-0 .........................................65MCO770-2-5 .........................................65MCO770-3-0 .........................................65MCO770-3-5 .........................................65MCO770-4-0 .........................................65MCO771-2-5 ..........................................65MCO771-3-0 ..........................................65MCO771-4-0 ..........................................65MCO803 ...................................................8MCO979 ................................................. 12MCO988 ................................................. 12MCOS10SC ............................................ 81
PP761-7 ..................................................... 61P761-8 ..................................................... 61P762-2 ....................................................62P762-4 ....................................................62P763 ........................................................ 63P764-1 .....................................................62P764-3 ....................................................62P764-5 ....................................................62P764-7.....................................................62P764-11 ...................................................62P765-14 ................................................... 63P765-16 ................................................... 63P769 ........................................................ 63P770 ........................................................64P771 .........................................................64
SSCP337A ...................................................9SM63(D) ................................................... 10SM64(D) ................................................... 10SM65(D) ................................................... 10
(D) Distributed by Integra MicroFrance SAS (France)(1) Not a MEDICAL DEVICE
DOCUMENT FOR USE IN EUROPE, MIDDLE-EAST AND AFRICA ONLY86
Notes
DOCUMENT FOR USE IN EUROPE, MIDDLE-EAST AND AFRICA ONLY87
Notes
Integra® MicroFrance®
Integra ENT - Plastic surgery catalogue
Medtronic B.V.Earl Bakkenstraat 10 6422 PJ Heerlen i The Netherlands
EC REP
Integra MicroFrance SAS (France) Le Pavillon i 03160 Saint Aubin le Monial i France
Manufacturers :
Medtronic Xomed6743 Southpoint Drive N.Jacksonville 32216-0980 i Florida USA
Swann Morton LtdPenn Works i Owlerton Green i SheffieldSouth Yorkshire S6 2BJ i Royaume Uni
Unimed SARue du Grand-Pré 101007 Lausanne i Suisse
France / International : +33 (0) 470 67 98 00 i +33 (0) 470 67 98 20 (Fax) i [email protected] Kingdom : +44 (0) 1264 312 725 i +44 (0) 1264 312 821 (Fax) i [email protected] : +49 (0) 2102 5535 6200 i +49 (0) 2102 5536 636 (Fax) i [email protected]: +32 (0)2 257 4130 i +32 (0)2 253 2466 (Fax) i [email protected]/contact
Europe, Middle-East, Africa
For more information, please contact customer service :
Availability of these products might vary from a given country or region to another, as a result of specific local regulatory approval or clearance requirements for sale in such country or region. n Please read carefully the instructions for use.n Non contractual document. The manufacturer reserves the right, without prior notice, to modify the products in order to improve their quality. n Warning: Applicable laws restrict these products to sale by or on the order of a physician.
Additional information for EMEA Customers only : Products mentioned in this document are CE class I or IIa devices. Contact Integra should you need any additional information on devices classification. All the medical devices mentioned on this document are CE marked according to European council directive 93/42/EEC on medical devices and its relatives. References that are not medical devices are identified with the indication “NOT A MEDICAL DEVICE”.
Products marked with the symbol (D) are distributed by Integra MicroFrance SAS (France)
Date of last révision : 06/2015
Integra and the Integra logo are registered trademarks of Integra LifeSciences Corporation or its subsidiaries in the United States and/or other countries. MicroFrance is a trademark of Integra LifeSciences Corporation or its subsidiaries. All other trademarks and product names are the property of their respective owners.©2015 Integra LifeSciences Corporation. All rights reserved. Printed in France. 0332887-1-ENDOCUMENT FOR USE IN EUROPE, MIDDLE-EAST AND AFRICA ONLY.
AgencinoxZone Industrielle89110 Aillant sur Tholon i France
Concorde Import ExportB.P. 3792300 Levallois-Perret i France
Chemische Fabrik Dr. Weigert GmbH & Co.MühlenhagenD-20539 Hamburg i Allemagne
Manufacturers with CE class I products only :
Moria S.A.15, rue Georges Besse92160 Antony i France
Medical devis & QA Services Ltd76, Stockport Road i TimperleyCheshire i WA15 75N i Royaume Uni
EC REPQfix440 Church RoadAvondale i PA 19311 USA
RMS - UK Limited28 Trinity Road i NailseaSommerset BS48 4NU i Royaume Uni
EC REPSunoptic Technologies6018 Bowdendale AvenueJacksonville 32216 i Florida USA