intellectual property available for licensing...energy and environment sr. no. title of the patent...
TRANSCRIPT
Intellectual Property available for licensing
Indian Institute of Technology Bombay has grown over the years to emerge as one of the top technical universities in the world for education, research and development in engineering, science, humanities and management.
The institute facilitates the generation and protection of IP, and their deployment for economic development through commercialisation and entrepreneurship.
Institute continuously seeks potential licensees to commercialize and deploy its technologies including products, processes, software and design for maximum public good.
National IP award in 2015 for top Indian academic institution for patents, best commercialisation of patents based products & processes & WIPO users trophy
Thomson Reuters India innovation award 2014
Spintronic oscillator
Sensetube Solar PV Hollow fibre membrane
UV mask X Ray to 3D
Indian Institute of Technology Bombay
‘Ideas are best when used’
IP Commercialisation Process at IIT Bombay
Index
Various patent applications filed/published/granted in the area of science and engineering available for licensing are given below. The patent applications are categorised based on their domain areas:
• Energy and Environment (82)• Healthcare (74)• Information & Communication Technologies (69)• Manufacturing/Chemicals (62)• Other Technologies (92)
More than 600 patent applications filed and 140 patents granted in and outside India
Invention
Disclosure
Due Diligencecheck
Protection- Patents- Trademark- Design- Copyright
Licensing- Direct- Collaborative- Entrepreneurship
Revenue generation and
distribution
Energy and EnvironmentSr. No. Title of the patent Application No.EE 1. Absorption module 155/MUM/2002EE 2. Contacting device 153/MUM/2002EE 3. Energy efficient regeneration process 767/MUM/2002EE 4. Freeze concentration system 1000/MUM/2002EE 5. Hybrid cooling system 154/MUM/2002EE 6. Refrigeration cum water heating system 151/MUM/2002EE 7. Switchable heat pipe 152/MUM/2002EE 8. Tube - tube heat exchanger 1082/MUM/2002EE 9. Multi utility vapour compressing system 613/MUM/2003EE 10. Process for energy efficient conditioning of air using liquid dessicant 272/MUM/2003EE 11. Biological treatment of aqueous effluents containing non aqueous
phase liquid pollutants2177/MUM/2006
EE 12. Porous gas diffusion for fuel cell and related electrochemical applications
959/MUM/2006
EE 13. Reactor for reductive conversion reactions using palladized bacterial cellulose.
691/MUM/2007
EE 14. An improved process for water treatment to remove arsenic, iron and phosphate by zero valent iron and a reactor therefore
2336/MUM/2008
EE 15. Cryogen free superconducting transformer 1401/MUM/2008EE 16. A solar cell having three dimensional junctions and a method of
forming the same3467/MUM/2010
EE 17. Counter flow heat exchanger for a joule-thomson cryocooler 2133/MUM2010EE 18. Freeze concentration system with tubular heat exchanger 1915/MUM/2010EE 19. Heat exchanger 2501/MUM/2010EE 20. Method and device for forming an electrical contact pattern on a
solar cell1787/MUM/2010
EE 21. Method and system for the remediation of sites contaminated with hazardous substances and wastes
2475/MUM/2010
EE 22. Method for forming metal contact on a surface of a solar cell covered by an anti-reflective coating (ARC) layer
3506/MUM/2010
EE 23. Solar fluid heater 2502/MUM/2010EE 24. Sun tracking mechanism with automated cleaning arrangement 1838/MUM/2010EE 25. Versatile flow field design for fuel cells 2762/MUM/2010EE 26. A current-source-fed single-power-stage grid connected pv system
a current source fed, input capacitor-less single power stage grid connected PV system
2762/MUM/2010
EE 27. 1,3-di-naphthalimide conjugate of calix[4]arene as a fluorescence sensor for the recognition of polycyclic aromatic hydrocarbons (PAHS) and their derivatives
730/MUM/2011
EE 28. Heat pipe based solar collector 1606/MUM/2011EE 29. A system for extracting water from air for drinking and cleaning
purposes and a method thereof2408/MUM/2011
EE 30. An optimum emulator of the dynamic characteristics of a wind turbine
2409/MUM/2011
EE 31. Fuel cell stack design 3110/MUM/2011EE 32. Energy conversion system 2912/MUM/2011EE 33. Fe3O4 nanoparticles embedded ZnO assemblies 3362/MUM/2011EE 34. Single-stage closed cycle joule-thomson cryocooler and mixed gas
refrigerant therefor884/MUM/2012
EE 35. A current-source-fed single-power-stage grid connected pv system a current source fed, input capacitor-less single power stage grid connected pv system
1234/MUM/2012
EE 36. A method of making aligned rope like nanocarbon structures with platelet like carbon
335/MUM/2012
EE 37. Method and apparatus for a novel hybrid solar pv-wind integration system with optimal number of power converters and inherent system stability
2908/MUM/2012
EE 38. Heat exchanger with solid deposition for enhanced performance 3062/MUM2012EE 39. Ultra-low power charge balancing and low noise stimulator using
adiabatic and self-clocking techniques3580/MUM/2012
EE 40. Method of fabricating inverted pyramid on crystalline silicon using lithography free fabrication technique
132/MUM/2013
EE 41. Heat and mass exchanger 1349/MUM/2013EE 42. A low cost bi-directional grid tied PV microinverter 1597/MUM/2013EE 43. Method and system for a multiport modular grid tied PV solar
inverter1603/MUM/2013
EE 44. A technique using GSM voice channel for remote monitoring in solar photovoltaic systems
1959/MUM/2013
EE 45. Slicing of silicon wafers for PV applications using wire electric discharge machining (wire-EDM)
2547/MUM/2013
EE 46. A new apparatus to characterise and quantify the spalling behavior of coal related to underground coal gasification process
3620/MUM/2013
EE 47. Dry sanitation system 3711/MUM/2013EE 48. Lighter than air platform for optimized solar power generation 163/MUM/2014EE 49. A novel piezoresitive cantilever device for biosensing using silicon
nitride and su8 as anchor204/MUM/2014
EE 50. Energy storage device with dendrimer functionalized nanoparticles and fabrication method thereof
267/MUM/2014
EE 51. Apparatus for efficient heat capture 500/MUM/2014EE 52. Gel precipitation as scalable, inexpensive technique for synthesis of
sub-micron mesoporous powders of mixed oxides and other ceramics for lithium ion battery applications
738/MUM/2014
EE 53. Method and system for detection and characterization of delamination in pv modules
1424/MUM/2014
EE 54. Panel heat exchanger 1828/MUM/2014EE 55. An apparatus for converting rotary motion to reciprocating motion
and reciprocating motion to rotary motion1847/MUM/2014
EE 56. Aluminum silicide schottky diode for methane detection in aqueous environment by spectroscopic technique
1983-MUM-2014
EE 57. Solar collector with integrated heat storage - ii 2088/MUM/2014EE 58. Ultra - portable micro - solid oxide fuel cell testing setup 2129/MUM/2014EE 59. Photonic devices by organo-metallic halides based perovkites
material and its method of preparation2323/MUM/2014
EE 60. Direct powdered rice husk nano - gasifier cum reactive -chromatographic reformer as a solid oxide fuel cell source
2339/MUM/2014
EE 61. A power management system for wireless sensor nodes powered by a single fuel cell
3830/MUM/2014
EE 62. Solar air heater 4209/MUM/2014EE 63. Method for balancing voltage in a hybrid modular multilevel
converter213/MUM/2015
EE 64. Modular converter with an auxiliary wave shaping circuit. 402/MUM/2015EE 65. Architecture specific maximum power estimation on a contoured
layout of a solar powered LTAP471/MUM/2015
EE 66. Plasma treatment of PECVD deposited dielectrics for improving minority carrier lifetime in silicon
636/MUM/2015
EE 67. Current density distribution mapping for fuel cell stack 698/MUM/2015EE 68. Thermochromic photovoltaic material and device 793/MUM/2015EE 69. Carbon based membrane for water purification/desalination 1219/MUM/2015EE 70. Waste heat recovery based clothes dryer 1391/MUM/2015EE 71. A new modular multilevel current source converter 1471/MUM/2015EE 72. Hybrid h-bridge modular multilevel converter 1563/MUM/2015EE 73. Filter adsorbent 1626/MUM/2015EE 74. Asymmetrical triple bridge converter based power electronic
transformer1811/MUM/2015
EE 75. Transformer-less grid connected inverter with two separate pv arrays while minimizing leakage current
1873/MUM/2015
EE 76. An interoperable on-site processing and analysis platform for wsn 2236/MUM/2015EE 77. Two-body solar powered lighter-than-air platform for optimized solar
power generation under dynamic conditions2468/MUM/2015
EE 78. An apparatus for sensing data 3054/MUM/2015EE 79. Oscillator based soil moisture measurement system 3418/MUM/2015EE 80. Synthesis and characterisation of cu2znsnte4 material via ball milling
for solar PV applications3460/MUM/2015
EE 81. Perovskite solar cell including inorganic oxide electron transport material deposited on perovskite absorber layer
4327/MUM/2015
EE 82. Wind Augmentation and Air Purifying Unit 4369/MUM/2015
Healthcare
Sr. No. Title of the patent Application No.HC 1. A dry method for surface modification of su-8 for immobilization of
biomolecules using a hotwire induced pyrolytic process 1267/MUM/2004
HC 2. A exogenous protein free pulmonary surfactant composition for adult respiratory distress syndrome and a process for preparing the same
1223/MUM/2005
HC 3. A facile and efficient synthesis of α-hydrazine-α, β-unsaturated nitroalkenes via morita-baylis-hillman reaction
1410/MUM/2005
HC 4. A mechanical device for harvesting energy from a joint movement 1167/MUM/2008HC 5. A novel approach to stabilize fluvastatin drug with improved
properties2093/MUM/2008
HC 6. Novel anticancer hydrazino derivatives of curcumin and process for preparation thereof
1568/MUM/2008
HC 7. Pharmaceutical composition for therapeutic or prophylactic treatment of bacterial infections and associated diseases
2345/DEL/2008
HC 8. A protein free surfactant composition for pulmonary diseases and a process for preparing the same
3370/MUM/2010
HC 9. An interface circuit between a sensor and a signal conditioning circuit
2384/MUM/2010
HC 10. Antioxidative composite polysulfone hollow fiber membrane with enhanced biocompatibility and improved separation performance
2697/MUM/2010
HC 11. Antiproliferative activity of dinuclear copper(i) complexes containing cyclodiphosphazane derivatives towards human cervical breast cancer cells
2458/MUM/2010
HC 12. Apparatus and method for orthopedic surgery 2883/MUM/2010HC 13. A nucleic acid construct for gene expression 1426/MUM/2011
HC 14. Conjoined lipid based multi compartment nanovesicles for drug delivery
672/MUM/2011
HC 15. Fluorescence detection of zn2+ followed by inorganic and organic phosphates and DNA by a water soluble and biologically benign glycoconjugate
1653/MUM/2011
HC 16. Layer by layer self assembled magnetic PLGA-chitosan nanoparticles for dual drug delivery and hyperthermia applications)
811/MUM/2011
HC 17. Lipopolymeric nanocapsules for drug delivery 266/MUM/2011HC 18. Anthracenyl terpyridine cu(ii) complex as anticancer agent 1819/MUM/2011HC 19. Towards the development of an impedimetric biosensor based on
magnetic nanoparticles for early detection of cervical cancer1898/MUM/2011
HC 20. A nanocochleate-nanosphere complex 2190/MUM/2011HC 21. A method and a system for producing thermolabile nanoparticles
with controlled properties and nanoparticles matrices made thereby2213/MUM/2011
HC 22. A method and apparatus for synthesizing vesicles by interdiffusion of stationary phases
2324/MUM/2011
HC 23. Method for forming a drug carrier nanocomposite 2837/MUM/2011HC 24. Glucose mediated facile synthesis of well dispersed gold nanoshells 322/MUM/2012HC 25. An unerring alignment & resection assembly guide 85/MUM/2012HC 26. Modular femoral patient specific jig for total knee arthroplasty 2574/MUM/2012HC 27. Modular knee joint implant for anthropometric anatomical variation 2575/MUM/2012HC 28. Metal ion driven conjugate of calix[4]arene for multiple sensing of
amino acids2868/MUM/2012
HC 29. Lab-on-a-chip beam-splitter for bio-sensing application 2890/MUM/2012HC 30. A method and system for velocity measurement of a fluid in a
channel2891/MUM/2012
HC 31. 3D nano hydroxyapatite/gelatin/carboxymethyl chitin composite engineered with controllable viscoelastic properties for guided bone regeneration
3221/MUM/2012
HC 32. Electrospun nano-composite bone regenerative material containing hardystonite.
3375/MUM/2012
HC 33. Electrospun nano-composite bone regenerative material 3594/MUM/2012HC 34. A triazole based quinoline derivatized calix[4]arene conjugate of
formula 174/MUM/2013
HC 35. Synthesis of n2-furfuryl deoxyguanosine phosphoramidite and modified oligonucleotides
454/MUM/2013
HC 36. Fluorescent polysaccharide based ph responsive compositions and methods of preparation thereof
2002/MUM/2013
HC 37. Single pass process for synthesizing sub-100 nanometer liposome from packed bed of colloidal particles.
2003/MUM/2013
HC 38. Entitle system for assisting a user in getting up from a bed 2161/MUM/2013HC 39. A novel, compact and efficient tau-shaped microchannel for blood
plasma separation2344/MUM/2013
HC 40. Targeted and triggered chitosan lipid core shell nanoparticles for combination chemotherapy
2469/MUM/2013
HC 41. An apparatus and a method for in-vivo power generation 2808/MUM/2013HC 42. Electrospun nano-composite scaffold based on poly-l-lactide-co-ε-
caprolactone, gelatin and nano-hydroxyapatite4002/MUM/2013
HC 43. Low-cost fully-printable paperfluidic assays for oral health monitoring.
1653/MUM/2014
HC 44. Novel cell secretomes for wound healing 1951/MUM/2014HC 45. Process for the production of lactic acid from aspergillus 2077/MUM/2014HC 46. Nano enabled wound dressing composition and a method for its
preparation2969/MUM/2014
HC 47. Development of controlled release sponge for prevention and treatment of surgical site infection
3278/MUM/2014
HC 48. A novel, cost effective and disposable micro pump with novel voice coil actuation mechanism for multipurpose microfluidic applications
3411/MUM/2014
HC 49. Polycaprolactone (pcl) microparticles loaded in chitosan in situ gelling system as a drug delivery system for bone diseases and bone repair/regeneration
3471/MUM/2014
HC 50. A method of preparation of ultra-small polymeric nanoparticles 3714/MUM/2014HC 51. Novel poly (n-vinyl caprolactam) based sponges/patches as a
thermoresponsive transdermal drug delivery system3808/MUM/2014
HC 52. Locally injectable cissus quadrangularis (veldt grape) extracts/fractions for treating bone fractures and the manufacturing process thereof
3809/MUM/2014
HC 53. Label free detection of analytes 3840/MUM/2014HC 54. Micronutrient supplement lipsalve 3877/MUM/2014HC 55. Optical fiber sensors using polyaniline 3890/MUM/2014HC 56. A method to fabricate miniature lenses using PDMS 3896/MUM/2014HC 57. MEMS based wideband (UV-VIS& IR) polymer photdetector for
photocnductivity and pyroelectric measurements4235/MUM/2014
HC 58. Chemo-retina 136/MUM/2015HC 59. Nucleic acid amplification using a minimal reaction volume on paper
or paper-like cellulosic material165/MUM/2015
HC 60. 3D surgery planning based on conventional 2D X-ray images as input using portable computer device
199/MUM/2015
HC 61. A laparoscopic device for retracting organ/tissue during surgery 1392/MUM/2015HC 62. An anchor 1502/MUM/2015
HC 63. Multi- use biopsy device 1503/MUM/2015HC 64. A method and a system for producing thermolabile nanoparticles
with controlled properties and nanoparticles matrices made thereby1575/MUM/2015
HC 65. 3D nano-hydroxyapatite/gelatin/carboxymethyl chitin composite engineered with controllable viscoelastic properties for guided bone regeneration
1592/MUM/2015
HC 66. A laparoscopic surgical instrument with an ergonomically functional handle
1828/MUM/2015
HC 67. Label-free method for detection and quantification of protein biomarkers
2587/MUM/2015
HC 68. Nano-in-micro formulation as biosensors 2967/MUM/2015HC 69. Low cost vein detector 2990/MUM/2015HC 70. Total cavopulmonary connection flow enhancer and energy saver 3091/MUM/2015HC 71. Enhanced photostability, extended range uva filtering and
camouflaging potential of avobenzone-defect rich zno nanocrystals complex
3310/MUM/2015
HC 72. A chimeric cetuximab-functionalized corona as a potent delivery system for microtubule-destabilizing nanocomplexes to hepatocellular carcinoma cells
3738/MUM/2015
HC 73. Photo-disintegrable, near-infra red responsive gold coated poly-(lactic-co-glycolic acid) nanostructures and a process for its preparation
4082/MUM/2015
HC 74. Development of a mobile phone based microscope 4743/MUM/2015
Information and communication technology Sr. No. Title of the patent Application No.IC 1. Method and apparatus for the encoding and decoding of speech at bit
rates below 2kbps273/MUM/2003
IC 2. Device and method for advertising through video display system 1338/MUM/2006IC 3. Architectural framework of communication network and a method of
establishing QoS connection2471/MUM/2007
IC 4. Nonvolatile floating gate analog memory cell 2217/MUM/2008IC 5. A device and method for automatically recreating a content
preserving and compression efficient lecture video386/MUM/2009
IC 6. A method and system for providing a content adaptive and legibility retentive display of a lecture on a miniature video device
2474/MUM/2010
IC 7. A tunable distributed voltage controlled oscillator for generating high frequency microwave signals
81/MUM/2010
IC 8. Distributed fault tolerance for WSNS with routing tree overlays 3403/MUM/2010
IC 9. Distributed oscillator for generating a high frequency microwave signal
1452/MUM/2010
IC 10. Distributed oscillator for generating a high frequency third harmonic microwave signal having high power output
1451/MUM/2010
IC 11. Opportunistic channel access scheme for cognitive radio system based on residual white space distribution
2231/MUM/2010
IC 12. Parent selection algorithims to repair faults for TDMA basesd wireless sensor networks with tree overlays
3400/MUM/2010
IC 13. Tunable distributed harmonic voltage controlled oscillator for generating second and third harmonic microwave signals
2392/MUM/2010
IC 14. High gain wideband fpc antenna 1626/MUM/2011IC 15. Low power analog FM transceiver for bio-telemetry applications 1473/MUM/2011IC 16. Methods for characterising high speed DAC multi level signals 725/MUM/2011IC 17. Selector device for bipolar RRAM 1727/MUM/2011IC 18. TREEFP: A TDMA-based reliable and energy efficient flooding
protocol for WSNS352/MUM/2011
IC 19. Wide range mixer in 0.18 um technology 826/MUM/2011IC 20. Frequency to voltage converter 1936/MUM/2011IC 21. Parallel metal plated split U-shape omnidirectional UWB Antenna 2792/MUM/2011IC 22. Differential resistance to frequency converter 2794/MUM/2011IC 23. Visual storyboard construction from scripts and subtitles 2818/MUM/2011IC 24. Self biased high efficiency fully differential RF rectifier 470/MUM/2012IC 25. Interference management in heterogeneous networks by resource
block prioritization1311/MUM/2012
IC 26. A novel scheme for differentiating uplink bandwidth request based on connection priority and access delay
855/MUM/2012
IC 27. Holistic optimization by prefetching query results 995/MUM/2012IC 28. A fully differential electromagnetically coupled microstrip antenna 1258/MUM/2012IC 29. Receiver for coherent optical transport systems based on analog
signal processing30/MUM/2012
IC 30. Process and temperature tracking bias circuits for realization of pt-invariant quantities in analog circuits
73/MUM/2012
IC 31. Self biased high efficiency fully differential RF rectifier 470/MUM/2012IC 32. A novel scheme for differentiating uplink bandwidth request based
on connection priority and access delay855/MUM/2012
IC 33. Next generation distributed cellular networks ip architecture 1664/MUM/2012IC 34. Method of capturing a full 360 degree view using panoramic
imaging systems.1867/MUM/2012
IC 35. Closed microchannel for electrowetting on dielectric based mircofluidics using e-beam lithography
1950/MUM/2012
IC 36. A novel robust signaling scheme for high-speed low-power communication over long wires
2000/MUM/2012
IC 37. Hysteretic controlled dc-dc buck converter with 2.8v to 4.2v battery supply for portable applications in 90nm CMOS
3257/MUM/2012
IC 38. GAN based schottky diode for read/write memory and the method of forming gd schottky contact
64/MUM/2013
IC 39. GAN based schottky diode for read/write memory and the method of forming gd schottky contact
65/MUM/2013
IC 40. Method of simultaneously forming low resistance metal contacts on n and p-type semiconductors
532/MUM/2013
IC 41. Flexible interconnection of scalable systems integrated using optical networks for data centers
1980/MUM/2013
IC 42. An ambipolar two terminal selection device 2134/MUM/2013IC 43. A novel delay element and high-speed pulse-based flip-flop 2863/MUM/2013IC 44. Apparatus and method for measurement of flow rate of cerebrospinal
fluid in a conduit3334/MUM/2013
IC 45. Electrically stable conductive filler-SU8-glycidol polymer nanocomposite element having piezoresistive or piezoelectric properties and method for fabricating the same
3848/MUM/2013
IC 46. Three dimensional lens-antenna 3869/MUM/2013IC 47. Aluminum silicide schottky diode for outdoor methane detection in
hostile environment by3916/MUM/2013
IC 48. Method and apparatus for improving clock rates in high speed circuits using feedback based flip-flops
44/MUM/2014
IC 49. Method and apparatus for dynamic range compression with low distortion for use in hearing aids and audio systems
290/MUM/2014
IC 50. A signal processing method for consonant-vowel ratio modification for improving speech perception in communication devices and hearing aids
739/MUM/2014
IC 51. A novel technique for polarization measurement with orthogonal-element array
2972/MUM/2014
IC 52. Wireless local area network (WLAN) discovery using non-WLAN network assistance
3125/MUM/2014
IC 53. Identification of a power source in the multiple power supply scenario
3282/MUM/2014
IC 54. Capacitively coupled current mode clock distribution network 3324/MUM/2014IC 55. A 4-14 Gbps inductor-less adaptive linear equalizer in 65nm cmos
technology4165/MUM/2014
IC 56. System and method for supplying adequate power during energy imbalance
190/MUM/2015
IC 57. Cricket delivery detection 319/MUM/2015
IC 58. Ultra low noise instrumentation amplifier 351/MUM/2015IC 59. A virtual reality system and method for providing synchronous
tactile feedback for user interaction503/MUM/2015
IC 60. A method and system for suppressing noise in hearing aids and speech communication devices using noise estimation based on dynamic quantile tracking
640/MUM/2015
IC 61. Hot axle detection system (HADS) 1389/MUM/2015IC 62. A electronic device that mimics a biological neuron and its
fabrication1545 /MUM/2015
IC 63. An EMI-immune, motion artifact compensated analog front end for biomedical signal acquisition
2044/MUM/2015
IC 64. Remote configuration and control of a panic button 732/MUM/2015IC 65. Underground communication system 3292/MUM/2015IC 66. A selector-less RRAM 3866/MUM/2015IC 67. Scalable ultra dense hypergraph network for data centers 4340/MUM/2015IC 68. Design of CMOS analog and digital circuits for personal health care
applications4557/MUM/2015
IC 69. Si doped GaN films deposited by co-sputtering of GaAs and Si 4554/MUM/2015
Manufacturing / Chemicals
Sr. No. Title of the patent Application No.MC 1. A process for selection of material specification for sheet metal
products808/MUM/2006
MC 2. Flyer for a jute spinning machine 661/MUM/2006MC 3. Sterling coolers 299/MUM/2006MC 4. A method and a scanner for three dimensional focused laser beam
spot scanning1847/MUM/2007
MC 5. Asymmetric synthesis of γ-nitrophosphonates in the absence of any other chiral catalysts
2359/MUM/2007
MC 6. A method of making nanocarbon structures from cashew nut shell pyrolysis vapours
899/MUM/2008
MC 7. An improved protective coating composition for hot dip galvanization of steel
247/MUM/2008
MC 8. Device and method for mitigating magnetic core saturation in a current transformer
592/MUM/2008
MC 9. Functionalised bis homocubyl systems as novel ligands and catalysts in asymmetric reactions
98/MUM/2008
MC 10. Wharve assembly for a jute spinning machine 115/MUM/2009
MC 11. A process for preparing poly (3,4-alkylenedioxythiophene) derivatives
2977/MUM/2010
MC 12. An Inpack semiconductor module and a method of manufacturing the same
298/MUM/2010
MC 13. Aqueous dispersible polymers of 3,4-alkylenedioxythiophene and process for the preparation thereof
2840/MUM/2010
MC 14. Aqueous formulation of water dispersible polymers of 3,4-alkylenedioxythiophene and process for the preparation thereof
2845/MUM/2010
MC 15. A condenser heat recovery based distilling process and apparatus 418/MUM/2011MC 16. A simple method for the synthesis of biocompatible 3-pyrrolyl
boron-dipyrromethenes1443/MUM/2011
MC 17. Glucose based naphthyl imino conjugate of formula I 1653/MUM/2011MC 18. Mechanism for producing woven (interlaced) and noobed (non-
interlaced) three dimensional fabrics689/MUM/2011
MC 19. Method and device for generating laser beam of variable intensity distribution and variable spot size
442/MUM/2011
MC 20. Production of highly polar PVDF films for electrical applications 1258/MUM/2011MC 21. Process for preparing polyarylated boron-dipyrromethenes 2468/MUM/2011MC 22. Composition and method of generation of hydrogen by thermal
decomposition of ammonia borane (AB) using silicon nanoparticles as catalyst
2533/MUM/2011
MC 23. Decarbonylation of aldehydes 3280/MUM/2011MC 24. A zinc complex of triazole linked pyridyl-conjugate of calix[4]arene 2905/MUM/2011MC 25. A triazole linked picolylimine conjugate of calyx[6]arene 125/MUM/2012MC 26. Rod cutter 1319/MUM/2012MC 27. A novel process for the three step protecting group free synthesis of
(+)-cardiobutanolide1780/MUM/2012
MC 28. A novel process for the four step protecting group free synthesis of (+)-Hagen’s gland lactones
1908/MUM/2012
MC 29. Stereospecific synthesis of nitro olefin 3052/MUM/2012MC 30. Process for the preparation of monodisperse nanostructures. 3374/MUM/2012 MC 31. A modified grignard metathesis (GRIM) polymerization process for
synthesis of conjugated polymers3447/MUM/2012
MC 32. Polynitration of aromatics 3738/MUM/2012MC 33. A process for the synthesis of α-trifluoromethyl ketones by
trifluoromethylation of olefins1193/MUM/2013
MC 34. High dielectric constant PVDF films with polar additives at elevated temperatures
1658/MUM/2013
MC 35. Palladium catalyzed synthesis of benzofurans and coumarins from phenols and olefins
2012/MUM/2013
MC 36. Simultaneous dry blanching and drying of button mushroom using microwave enhanced hot air heating system
219/MUM/2013
MC 37. A methodology to establish zeolitization potential of fly ash 3061/MUM/2013MC 38. A method of producing a novel electrically conductive geosynthetic 3597/MUM/2013MC 39. A method for synthesizing defect rich nanocrystals of variable size
with enhanced defect luminescence3713/MUM/2013
MC 40. New process to convert heterogeneous kumada type couplings based on Nickel (II) catalysts to homogeneous reactions
522/MUM/2014
MC 41. Novel homogeneous Nickel(II) catalyst 523/MUM/2014MC 42. Gram scale synthesis of carbon nano-onions from natural oils and
uses thereof1571/MUM/2014
MC 43. Mass production of reduced graphene oxide by green biological route
1604/MUM/2014
MC 44. Nickel (0) catalyzed kumada chain transfer polycondensation 1701/MUM/2014MC 45. Co-B/AlPO4 catalyst for sodium borohydride hydrolysis 2350/MUM/2014MC 46. Regioregular conjugated copolymers based on 3-fluorothieno[3,4 b]
thiophene2739/MUM/2014
MC 47. Regioregular conjugated polymers based on 3,4-b diheteropentalenes 4005/MUM/2014MC 48. A novel process to get highly conducting and highly transparent thin
films and its applications as transparent conductor783/MUM/2014
MC 49. A novel process for transferring graphene oxide monolayer sheets on substrates
1486/MUM/2015
MC 50. Vapour absorption refrigeration system including a metal hydride chamber to maintain evaporator inlet temperature
1571/MUM/2015
MC 51. Vapour absorption refrigeration system to equalize liquid volume in titling position
1610/MUM/2015
MC 52. Stirling engine and a method for optimizing efficiency thereof 1638/MUM/2015MC 53. Gearbox for tilt rotor coaxial helicopter with differential speed for
yaw control1971/MUM/2015
MC 54. Template assembly 2421/MUM/2015MC 55. Template-assisted method of selective functionalization of remotely
located para-C-H bond comprised on arene 2422/MUM/2015
MC 56. Method of synthesis of monodispersed graphene quantum dots 2476/MUM/2015MC 57. Process for the preparation of cephalosporolides E and F 2595/MUM/2015MC 58. A process for synthesis of methyl ketones by wacker type oxidation
reaction2965/MUM/2015
MC 59. Method and system of synthesizing a target material using an ultra fast laser ablation technique
3253/MUM/2015
MC 60. A method for the formation of vapor phase Self Assembled monolayer of a non-volatile material at low temperature
3885/MUM/2015
MC 61. Controlled spontaneous three dimensional fabrication of micro/meso structures
4608/MUM/2015
MC 62. Method and apparatus for electronic nose system for explosive sensor application.
4668/MUM/2015
Other Technologies
Sr. No. Title of the patent Application No.OT 1. A hybrid transmission system 1075/MUM/2004OT 2. A diagnostic method for determining deformations in a transformer
or reactor winding1893/MUM/2007
OT 3. Inverted switched reluctance motor as hub drive for electric vehicle 365/MUM/2007OT 4. Method for calculating capacitance value and magnetizing
inductance value for smooth sustained voltage build up in an induction generator
2286/MUM/2008
OT 5. An on-line diagnostic method for health monitoring of a transformer 1700/MUM/2009OT 6. A mechanical manipulator arm 174/MUM/2010OT 7. Process for synthesis of TB Doped ZnO Nanoparticles for total
control over the UV to green luminiscence (GL) intensity ration and the tunability of UV luminiscence (UVL)
2103/MUM/2010
OT 8. A system and method for electricity price forecasting 236/MUM/2011OT 9. A triaxial geocomposite testing apparatus for simultaneously
calibrating multiple pressure transducers223/MUM/2011
OT 10. Colorimetric sensing of bisulphate ion (HSO3-) by calix[4]-conjugate protected Ag-nanoparticles
1089/MUM/2011
OT 11. Micro deformation device 306/MUM/2011OT 12. Wall mounted speed regulator for a BLDC motor driven ceiling fan 542/MUM/2011OT 13. Yaw rate control in motor vehicles 785/MUM/2011OT 14. AC current driven open-bridge configuration for measuring
impedance variations of a sensor2205/MUM/2011
OT 15. Method and injector for controlling gas flow in a duct 2206/MUM/2011OT 16. A segmented switched reluctance motor as hub drive for an electric
vehicle 2658/MUM/2011
OT 17. A biasing circuit for a PMOSFET resistor for compensating process, voltage and temperature (PVT) variations affecting the resistance of the PMOSFET resistor
1198/MUM/2012
OT 18. Novel high-electron mobility transistor 1294/MUM/2012OT 19. Resonant pulse based exact maximum power point tracking of
mismatched modules in PV strings using current equalization1652/MUM/2012
OT 20. Wide-field goniometer for spectroscopic measurement of albedo in laboratory and field
1315/MUM/2012
OT 21. Method for sensing carbon monoxide gas using iron porphyrin in organic field effect transistor as a sensor
1923/MUM/2012
OT 22. Conformal hydrodynamic nanopolishing machine and process 1929/MUM/2012OT 23. A method of processing shopfloor metallic waste 1983/MUM/2012OT 24. A Method of Processing Forging Oxide Scale Waste 2026/MUM/2012OT 25. Constant Bandwidth and gain, low-area, low-power and high swing
GmC filter2212/MUM/2012
OT 26. Piezoresistive microcantilever CO sensor and method of making the same
2276/MUM/2012
OT 27. Low speed high diffusion axial fan/compressor rotor blade design with computer generated airfoils in to a blended blade shape
2451/MUM/2012
OT 28. Voltage profile based biphasic constant current stimulator with artifact suppressor
2562/MUM/2012
OT 29. Determination of crack volume in fine-grained soils 2578/MUM/2012OT 30. A methodology to investigate influence of thermal energy on soil
fabric3046/MUM/2012
OT 31. A methodology to establish drying-path soil water retention curve of fine-grained soils
3043/MUM/2012
OT 32. A cup test to determine the parameter indicating failure in forming of a sheet metal product
3143/MUM/2012
OT 33. Design of a probe for measuring radiative heat flux of combustion systems
3368/MUM/2012
OT 34. Fiber optic probe and a method for detection of nitro containing compounds by using the same
3448/MUM/2012
OT 35. Apparatus and method for establishing soil water characteristic curve and determining hydraulic conductivity of soils.
130/MUM/2013
OT 36. Mechanical system for multi level farming 988/MUM/2013OT 37. Frequency to digital sigma delta based frequency modulation/
frequency shift keying (FM/FSK) receiver CMOS integrated transceiver design
1598/MUM/2013
OT 38. Vortex cross correlation flowmeter 1763/MUM/2013OT 39. Influence of initial water content and specimen thickness on the swcc
of fine-grained soils2040/MUM/2013
OT 40. A methodology to simulate flow through fractured rockmass 2041/MUM/2013OT 41. Device for removing paver blocks 2393/MUM/2013OT 42. Switched reluctance drive for ceiling fan 2423/MUM/2013OT 43. An apparatus to determine the lysimetric method for modelling
radioactive contaminant transport in soil mass2792/MUM/2013
OT 44. Cracking characteristics of fine-grained soils under varied environmental conditions
2873/MUM/2013
OT 45. Method of fastening a plurality of structures 2880/MUM/2013OT 46. A Sub-1V 32nA Process, Voltage and Temperature Invariant Voltage
Reference Circuit3032/MUM/2013
OT 47. Schottky junction diode based thermal neutron detectorspectroscopic technique
3736/MUM/2013
OT 48. Development of graphene nanoplatelet embedded polymer microcantilever for vapour phase explosive detection applications
110/MUM/2014
OT 49. A composite structure of encapsulated core-shell nanoparticles and graphene and a method for production thereof
138/MUM/2014
OT 50. Split dihedral blade tip for axial compressor rotor 371/MUM/2014OT 51. Pretreatment of nuts with microwave energy to prevent infestation
with improvement in storability of food grains549/MUM/2014
OT 52. A modular multilevel converter (MMC) sub-module structure for reducing switching losses
834/MUM/2014
OT 53. Synthesis of higher grade fly ash zeolite X from fly ash by three step fusion
1631/MUM/2014
OT 54. Method for increasing the hydrophobicity of the paper 1652/MUM/2014OT 55. Novel nano-actuator based curvature measurement system 1784/MUM/2014OT 56. Current-mode voltage reference with low sensitivity to process,
supply voltage and temperature variations.2513/MUM/2014
OT 57. Dual fuel compression ignition internal combustion engine system employing compressed natural gas and diesel and method of operating the same
3009/MUM/2014
OT 58. Methodology for improved machinability of slender tube components of Ti
3469/MUM/2014
OT 59. New process for reduction of graphene oxide 3472/MUM/2014OT 60. Mn-Ni-Sn based full Heusler alloys for low temperature exchange
bias applications3532/MUM/2014
OT 61. An improved method for machining a metallic object 3616/MUM/2014OT 62. Single layer microfluidic device for three dimensional hydrodynamic
focusing of a sample fluid using a sheath fluid and method of fabricating the same.
96/MUM/2015
OT 63. Encasements prepared with plastic water bottles 757/MUM/2015OT 64. Intellectual property management system tool (IPMS tool) 1118/MUM/2015OT 65. Fabrication of ceramic carbon composites with low specific
resistance1552/MUM/2015
OT 66. A novel and inexpensive design for establishing flow rates in simulated moving bed chromatography (SMBC) system
1947/MUM/2015
OT 67. A methodology to determine thermal conductivity of soils from flux measurement
1930/MUM/2015
OT 68. Vehicle body construction with modular sandwich panels 2290/MUM/2015OT 69. Contraction vortex flowmeter 2459/MUM/2015OT 70. Tunable reference voltage generating circuit and method therefor 2464/MUM/2015OT 71. Flow measuring device for high temperature fluids 2497/MUM/2015OT 72. Tensile structure reinforcement for vehicle bodies 2490/MUM/2015OT 73. Foot operated bottle crusher 2596/MUM/2015OT 74. A novel dual switching operation of simulated moving bed
chromatography (SMBC) system for enhancing key component purity
2602/MUM/2015
OT 75. Soil moisture sensor based on electrochemically synthesized graphene quantum dots
2796/MUM/2015
OT 76. Single event soft error (SE) tolerant latch 2806/MUM/2015OT 77. Flow distributor for thermocline storage tank 2807/MUM/2015OT 78. An apparatus for measuring cosmic ray flux in a radiosonde
telemetry system, and a method thereof2929/MUM/2015
OT 79. Unusually high magnetization in ferrite bilayers 3260/MUM/2015OT 80. Proposal and design of a nano-oscillator based on magnetic domain
wall motion3395/MUM/2015
OT 81. Elimination of support mechanism in additive manufacturing through five axis deposition.
3366/MUM/2015
OT 82. Apparatus and method for measuring moisture content in medium using time domain reflectometry
3419/MUM/2015
OT 83. Segmented object manufacturing 3524/MUM/2015OT 84. Methodology of improving formability in planar anisotropic sheets 3589/MUM/2015OT 85. Method for hydroxylation of graphene 3814/MUM/2015OT 86. A matrix update method for admittance matrix formation in real-time
simulation of power electronics3864/MUM/2015
OT 87. Bitumen coated bamboo cell (BCBC) 4101/MUM/2015OT 88. Method and system for soil classification 4308/MUM/2015OT 89. Paper package for fragile/ brittle products 4609/MUM/2015OT 90. Method for frictionless precision guidance using flexible links in
vertical plane4607/MUM/2015
OT 91. Design and development of a gearless spherical robot 4717/MUM/2015OT 92. Realization of the composite injection moulds with conformal
cooling channels through hybrid layered manufacturing.4762/MUM/2015
Note: Details of published and granted patents can be found on following weblinks• Indian patent office website (http://ipindiaservices.gov.in/publicsearch/) • IIT Bombay Licensing website (www.iitb.ac.in/licensing)
Multi utility heat pump
SCFE technology based plant
Board games Ethernet router
Soil biotechnology based sewage treatment plant
IIT Bombay technologies licensed
Success stories
The Dean (Research & Development)Indian Institute of Technology BombayPowai, Mumbai 400076.Phone: +91-22-2576 7039Fax: +91-22-25723702Email: [email protected]: www.iitb.ac.in/licensing
For more information please contact:
Licensees
Entrepreneurship