intellitone pro toner and probe series - allied electronics€¦ · intellitone ™ pro toner and...
TRANSCRIPT
Technical Data
IntelliTone™ Pro Toner and Probe Series
Every day, cabling installers and network
technicians deal with the shortcomings of
cable location tools based on 40-year-old
technology. Until now.
The IntelliToneTM Pro Toner and Probe
Series from Fluke Networks gives you
cutting-edge digital and analog cable
locating technologies that are
as advanced as the systems you work
with. IntelliTone is a breakthrough
solution – and the only solution – that
locates and isolates the most elusive,
hidden or bundled voice, data and video
cables and wire pairs quickly and reliably
– even on active networks.
Breakthrough digital and analog toning in oneIntelliTone™ Pro is the first toner and probe
to offer digital and analog toning all in
one tool. That means it’s equipped with the
most powerful cable location and verifica-
tion technologies for any work environment
– even active networks.
• Eliminates confusion over cable location;
decisively rejects noise and false signals
• Locates the correct cable bundle
• Isolates a cable within the bundle,
despite cable bleed
• Verifies twisted-pair installation with
visual end-to-end continuity test (opens,
shorts and reversed pairs)
• Identifies individual wire pairs with new
SmartTone™ analog toning
• Simplifies signal interpretation in noisy
environments with multiple LED indicators
Locate cables quickly and easily Fluke Networks has applied decades of cable
test engineering expertise to the science of
locating copper cables. The result is what
we call IntelliTone technology – a digital
signal-toning and signal-interpreting
process that rapidly zeroes in on cables.
Finds the cables the others can‘t
IntelliTone technology energizes cable
conductors with a smart, sychronized digital
signal. Multiple tone types occur in the
signal that help you to:
• LOCATE the correct cable bundle using
maximum radiation.
• ISOLATE a cable within the bundle using
a signal with minimum radiation.
• VERIFY cable conductor continuity with
an automated signal that steps through
each conductor.
Locate hidden cables
One of the toughest, most time-consuming
parts of locating a cable has been in tracing
its path amidst multiple cables and bundles
in wiring closets. The IntelliTone digital
signal features a LOCATE tone that provides
maximum radiation, allowing you to quickly
locate hidden and hard-to-find cabling.
Isolate the right cable or pair – fast
Cabling installations have become
increasingly complex, which has made
cabling increasingly difficult to locate with
traditional technologies.
When cables are run together for even
short lengths, a signal from one can bleed
over to another. One cable might carry the
original signal; other cables might carry the
signal as a result of bleed. Isolating cables
with traditional tools requires guesswork,
training, time for repeated testing –
and even the best efforts often result
in mistakes.
IntelliTone Pro provides two cutting-edge
technologies to isolate cables or wire pairs.
Digital mode can be used to isolate twisted-
pair cables on a switch or within a bundle.
SmartTone™ analog mode can be used to
isolate wire pairs at an unterminated outlet
or on a telecommunications block.
Overcome noise – and save hours of timeFluorescent lights, machinery, computer
monitors and electrical wiring all produce
noise that slows down cable location.
Together, the IntelliTone Pro Toner’s syn-
chronized digital signal and the IntelliTone
Pro Probe’s microprocessor controlled signal
identification technology reject noise and
false signals to clearly identify cable
location. This can save you hours every
week on cable location projects.
Tone on live networks safely and effectivelyModern network devices use common mode
termination for cables connected to their
ports. This reduces noise and crosstalk in
the cable; but, it can also absorb a
traditional toner signal. Unlike traditional
signals, the IntelliTone digital signal stays
strong despite common mode termination.
And the IntelliTone Pro Toner automates
toning individual cable conductors, making
it quick, efficient and safe to locate cables
on active networks.
Verify conductor continuity with cablemap
Eliminate callbacks during cabling moves,
adds and changes with the powerful
diagnostic capabilities of IntelliTone™ Pro.
The IntelliTone Pro 200 Probe features a
Cablemap capability that identifies
common cable miswires in twisted pair
cabling. IntelliTone technology automates
the testing of each conductor for end-to-
end continuity; LED lights and tones clearly
indicate miswires.
Identify and troubleshoot cable servicesService – Is the RJ45 jack a datacom jack,
a phone jack – or a dead jack? IntelliTone
Pro 200 Toner LEDs clearly identify common
datacom and telecom services found on
today’s networks including 10/100/Gigabit
Ethernet links.
Telecom troubleshooting – Detect Line 1
voltage, polarity, and ring with IntelliTone
Pro 100 and 200 Toners. The IntelliTone
Pro 200 Toner adds Line 2 troubleshooting.
Confirm telecom circuits with the built-in
talk battery capability.
Continuity – Once you’ve located a cable,
the next step is to verify cable conductor
continuity. IntelliTone Pro 100 and 200
Series Toners make it easy – eliminating
the need for a separate diagnostic tool.
Identify and diagnose POTS with multi-line Telco detect, polarity and ring indication (Line 1 and Line 2)
Identify and diagnose Ethernet link connectivity with NIC/hub indication
Cable termination indicator identifies if cable is connected or not
IntelliTone provides robust toning into active network equipment while eliminating cable misidentification due to bleed
Banana jacks allow you to use only the leads you need and facilitates easy replacement
One tool supports all VDV cable types (RJ45, RJ11, coax, and bare wire)
Knob provides simple, task oriented operation
Test cable continuity, eliminating need for separate diagnostic tool
Multiple-level LEDs simplify signal interpreta-tion in noisy environments. Visually steps through wire-map tests (200 only)
Time-saving thumbwheel lets you select desired toning mode on the probe rather than toner
Test cable continuity – eliminat-ing need for separate diagnostic tool
Analog mode used to isolate individual wire pairs with SmartTone
SYNC indicates detection of IntellTone signal and shows battery status at power-up
Choose between two digital detection modes:
– lets you locate cables at a distance
– lets you isolate cables in bundles or at patch panels
Battery status: 3-level battery status indicator LEDs on the toner and probe light for one second at power on
Auto-Off feature: The toner turns off automatically after 2.5 hours of inactivity. Probe turns off after 1 hour of inactivity
SmartTone™ analog technology - IntelliTone Pro Toners generate four different analog songs which alternate every time the pair under test is shorted; IntelliTone Pro Probes detect this tone or any other analog signal from other testers
IntelliTone digital technology with advanced signal processing provides high-resolution measurement
Toner and Probe shared features:
Plug (200 only) works with CableMap function – eliminating the need for a separate wiremap tool
Tone active networks safely and effectively with IntelliTone digital mode
Precisely isolate wire pairs with built-in SmartTone analog toning
Fluke NetworksP.O. Box 777, Everett, WA USA 98206-0777
Fluke Networks operates in more than 50 countries worldwide. To find your local office contact details, go to www.flukenetworks.com/contact.
©2006 Fluke Corporation. All rights reserved. Printed in U.S.A. 6/2006 2113101 D-ENG-N Rev C
N E T W O R K S U P E R V I S I O N
IntelliTone Pro 100 Kit• Finds the cables the others can’t
• IntelliTone digital signal processing rejects noise and false signals
• SmartTone analog signal precisely isolates individual wire pairs
• Tones safely and clearly on active networks
• Diagnoses essential cable information with polarity, continuity, and talk battery
• Identifies and diagnoses POTS with Line 1 service and polarity
IntelliTone Pro 200 Kit (adds the following functionality)• Identifies and diagnoses 10/100/1 Gb Ethernet link connectivity with NIC/
hub indication
• Identifies and diagnoses POTS with Line 2 POTS service and polarity
• Verifies twisted-pair installation with CableMap capability which identifies common cable miswire
Specifications
General Operating temperature 32 °F to 104 °F (0 °C to 40 °C)
Storage temperature -4 °F to +140 °F (-20 °C to +60 °C)
Operating relative humidity (% RH without condensation)
95% (50 °F to 95 °F; 10 °C to 35 °C) 75% (95 °F to 104 °F; 35 °C to 40 °C) Uncontrolled < 50 °F (< 10 °C)
Vibration Random, 2 g, 5 Hz – 500 Hz
Shock 1 m drop test with and without module
Safety EN 61010-1 1st Edition + Amendments 1, 2
Altitude 3000 m
EMC EN 61326-1
Battery type and life 9 V alkaline (NEDA 1604A or IEC 6LR61); 20 hours typical
Applications Copper cabling media, including shielded (STP) and UTP cable; 75 or 50 Ohm coaxial cable; two conductor control, security, generic cabling. 10 Base-T or 10/100/1000 Base-T datacom networks. POTS telecom service.
Toner Dimensions 5.54 in x 2.94 in x 1.25 in (14.1 cm x 7.5 cm x 3.2 cm)
Display LED
Control Thumbwheel switch
Toner interface Main Mod8 port for tone generation on all 4 pairs of UTP / STP cabling, F connector for coaxial cabling, Banana jack plugs (2) - two conductor wiring
Toner frequency IntelliTone™ signal: encoded digital signal Analog SmartTone signal: 500-1200Hz, 4 Songs
Talk battery voltage 6 V into 600 W
Output power 5 V p-p
Voltage protection 100 V
Auto power down Turns off automatically after 2.5 hours of inactivity
Probe Dimensions 8.73 in x 1.88 in x 1.26 in (22.2 cm x 4.8 cm x 3.2 cm)
Display (8) LED indicators, Synch LED indicator
Audio IntelliTone: Microprocessor controlled audio files, Analog: Detected toner signal
Control Thumbwheel switch, volume control wheel
Tone detection Detects IntelliTone™ digital signal for Locate, Isolate and CableMap Detects Analog SmartTone Signal (500-1200Hz) and other analog toners.
Toner interface Main Mod8 port for cablemap on all four pairs of UTP / STP cabling
Auto power down Turns off automatically after one hour of inactivity
Ordering Information
Model Number Items Included
MT-8200-60A IntelliTone Pro 200 Kit Includes IntelliTone Pro 200 Toner and 200 Probe, coax F con-nector adapter, two RJ11 and two RJ45 patch cables,test leads with alligator clips, lanyards, owners CD and quick start guide, two 9 volt batteries
MT-8200-50A IntelliTone Pro 100 Kit Includes IntelliTone Pro 100 Toner and 100 Probe, coax F con-nector adapter, RJ11 and RJ45 patch cables, test leads with alligator clips, lanyards, owners CD and quick start guide, two 9 volt batteries
MT-8200-61A IntelliTone Pro 200 Toner
MT-8200-51A IntelliTone Pro 100 Toner
MT-8200-63A IntelliTone Pro 200 Probe
MT-8200-53A IntelliTone Pro 100 Probe
IntelliTone Pro Toner and Probe Accessories
MT-8202-05 IntelliTone Pro Case
MT-8203-20 Test Leads with Bed of Nails
MT-8203-22 Test Leads with Alligator Clips