interior design intent drawings - condensed version 8.10...apco fullview standard assembly signs -...
TRANSCRIPT
INTERIOR DESIGN INTENT DRAWINGS - condensed version 8.10.2018
DSTANDARDS MANUAL FOR WAYFINDING SIGNAGE
COMMENTS ADDED 11-11-16
D I R E C T O R YD I R E C T O R Y
O H S U H O S P I TA L • M A R Q UA M H I L L C A M P U S
H O S P I TA L • M A R Q U A M H I L L C A M P U S
D I R E C T O R Y
D I R E C T O R YD I R E C T O R Y
H O S P I T A L • M A R Q U A M H I L L C A M P U S
2'-3"
2"
3 1/2"
1/4"
5'-2"
~6"
5"2 1/2"
1/2"1/2"
9"
2 1/2"
1 3/4"
2 1/2"
1/4"
1/4"
1/2"
7'-2"
9"
6 5/8"1'-3 1/8"
LEFT SIDE VIEW RIGHT SIDE VIEW
TOP VIEW
Custom fabricated, double-sided cabinet with painted custom radius aluminum support poles.
DECORATIVE HEADERCustom fabricated cabinet with painted acrylic panels. Acrylic panels are mounted 1/8” off cabinet. 1/8” spacer should not be visible.
OPPOSITE FACE
DECORATIVE FOOTERCustom fabricated cabinet with painted acrylic panels. Panels should align with insert windows above.
ACCENT BARS3/4” (th.) painted aluminum accent bars welded to support poles. HANDHELD MAP HOLDER
Custom fabricated cabinet with angled slots to hold folded vertical
8.5” x 11” brochure inserts. Fabricator to engineer insert slots and quantity.
Background of cabinet is a painted mesh screen.
BASEPLATESMin. 3/4” (th.) aluminum base (to match accent bars)with chemset studs stainless steel studs and hardware.
DIRECTORY HEADERCustom fabricated cabinet with a silk-screened header. Header should surface align with with angled metallic silver decorative header above.
DIRECTORY CABINETAPCO FullView Large Assembly sign - horizontal configuration with vertical divider bar. Mounted to central support, signs should be flush with Header above. Large format printed inserts sit behind matte acrylic lens. Inserts should fit tight against acrylic window for optimal appearance. Window is removed from frame with a suction cup tool using a lift/pull technique.3’-9”w x 2’-5”h
Custom fabricated cabinet with vinyl symbol. Cabinet is double-sided.
D-1 MAIN DIRECTORY, FREESTANDING, w/HANDHELD MAPScale: 1”=1’-0” on an 11” x 17” sheet
D1STANDARDS MANUAL FOR WAYFINDING SIGNAGE
D I R E C T O R YD I R E C T O R Y
O H S U H O S P I TA L • M A R Q UA M H I L L C A M P U S
1" 3"
5'-2"
1/4"
1/4"
1/2"
2"
4"
H O S P I TA L • M A R Q U A M H I L L C A M P U S
RIGHT SIDE VIEW LEFT SIDE VIEW
WALL BRACKETHidden z-bar bracket inset behind support poles.
TOP VIEW
ISOMETRIC VIEW
D I R E C T O R Y
D-1a MAIN DIRECTORY, WALL MOUNTED, w/HANDHELD MAPScale: 1”=1’-0” on an 11” x 17” sheet
DECORATIVE HEADERCustom fabricated cabinet with painted acrylic panels. Acrylic panels are mounted 1/8” off cabinet. 1/8” spacer should not be visible.
DECORATIVE FOOTERCustom fabricated cabinet with painted acrylic panels. Panels should align with insert windows above.
INSTALLATIONSign to be mechanically fastened to wall. Depending on wall condition extra backing may be required to support weight of sign. Recommend using z-bar clips inset behind support poles and mechanical fasteners through APCO FullView Large mounting plate.
DIRECTORY HEADERCustom fabricated cabinet with a silk-screened header. Header should surface align with with angled metallic silver decorative header above.
DIRECTORY CABINETAPCO FullView Large Assembly sign - horizontal configuration with vertical divider bar. Mounted to backer plate, signs should be flush with Header above. Large format printed inserts sit behind matte acrylic lens. Inserts should fit tight against acrylic window for optimal appearance. Window is removed from frame with a suction cup tool using a lift/pull technique.3’-9”w x 2’-5”h
HANDHELD MAP HOLDERCustom fabricated cabinet with angled slots to hold folded vertical 8.5” x 11” brochure inserts. Fabricator to engineer insert slots and quantity. Background of cabinet is a painted mesh screen.
3'-10"
ACCENT BARS3/4” (th.) painted aluminum accent bars welded to support poles.
Custom fabricated cabinet with painted custom radius aluminum support poles.
D2STANDARDS MANUAL FOR WAYFINDING SIGNAGE
D I R E C T O R YD I R E C T O R Y D I R E C T O R YD I R E C T O R Y
H O S P I TA L • M A R Q UA M H I L L C A M P U S P H Y S I C I A N S PAV I L I O N • M A R Q UA M H I L L C A M P U S
4'-6"
6 5/8"
6'-3 1/2"
3'-9"2"
2'-5"
SIDE VIEW SIDE VIEW
TOP VIEW
D-2 MAIN DIRECTORY, FREE STANDINGCustom fabricated cabinet with paintedaluminum poles. Decorative angled finspainted silver metallic and champagnemetallic. Header is painted with 1/4” thickacrylic white letters. Footer is an insert behindan acrylic window. Map and destinationlistings are contained within a cabinet withtwo acrylic window faces. Acrylic windows areremoved by pushing up into reveals notchedinto the top of the cabinet. Physician directoryhas only one acrylic window.
D-2 MAIN DIRECTORY, FREESTANDINGScale: 1”=1’-0” on an 11” x 17” sheet
D3STANDARDS MANUAL FOR WAYFINDING SIGNAGE
D I R E C T O R YD I R E C T O R Y
O H S U H O S P I TA L • M A R Q UA M H I L L C A M P U S
1" 3"
D I R E C T O R Y
O H S U H O S P I TA L • M A R Q UA M H I L L C A M P U S
D-2a MAIN DIRECTORY, WALL MOUNTEDScale: 1”=1’-0” on an 11” x 17” sheet
FINALIZE LOCATION ON WALL WITH PROPOSED ARTWORK INSTALLATION
RIGHT SIDE VIEW LEFT SIDE VIEW
WALL BRACKETHidden z-bar bracket inset behind support poles.
TOP VIEW
DECORATIVE HEADERCustom fabricated cabinet with painted acrylic panels. Acrylic panels are mounted 1/8” off cabinet. 1/8” spacer should not be visible.
DIRECTORY HEADERCustom fabricated cabinet with a silk-screened header. Header should surface align with with angled metallic silver decorative header above.
ACCENT BARS3/4” (th.) painted aluminum accent bars welded to support poles.
DIRECTORY CABINETAPCO FullView Large Assembly sign - horizontal configuration with vertical divider bar. Mounted to backer plate, signs should be flush with Header above. Large format printed inserts sit behind matte acrylic lens. Inserts should fit tight against acrylic window for optimal appearance. Window is removed from frame with a suction cup tool using a lift/pull technique.3’-9”w x 2’-5”h
Non-illuminated inserts will minimally be printed at 1200 DPI using pigment-based UV inks on a white, satin finish UV-coated photo paper, with a matte UV over-laminate (unless otherwise noted in the design intent drawings). The thickness of the photo paper must be heavy enough such that no wrinkles or waves will occur once installed into the sign housings. If necessary, rigid backers may be used.
DECORATIVE FOOTERCustom fabricated cabinet with painted acrylic panels. Panels should align with insert windows above.
INSTALLATIONSign to be mechanically fastened to wall. Depending on wall condition extra backing may be required to support weight of sign. Recommend using z-bar clips inset behind support poles and mechanical fasteners through APCO FullView Large mounting plate.
3'-10"
Custom fabricated cabinet with painted custom radius aluminum support poles.
4'-5 1/2"
4'-5 1/2"
1/4"
1/4"
1/2"
2"
4"
3'-9"
3'-7 3/4"
3"3 1/2"
3'-8 3/8"
4 1/4" 3 1/4"
7"
2'-4 3/4"
3"
1'-5 1/2" 2'-3 1/2"
D4STANDARDS MANUAL FOR WAYFINDING SIGNAGE
D I R E C T O R YD I R E C T O R Y
O H S U H O S P I TA L • M A R Q UA M H I L L C A M P U S
4 1/2"
5'-1 1/8"
5'-6"
3'-1 1/4"
2'-5"
5 3/4"
SIDE VIEW
Custom cabinet fabricated out of 1/8” (th.) painted aluminum with painted 3 1/2” round support poles with beveled top edges.
DECORATIVE HEADERCustom fabricated cabinet with painted acrylic panels. Acrylic panels are mounted 1/8” off cabinet. 1/8” spacer should not be visible.
DECORATIVE FOOTERSilk-screened footer and graphics.
DIRECTORY HEADERHeader fabricated out of 1/8” (th.) aluminum silk-screened (or mask and spray) copy and graphics.
DIRECTORY CABINETAPCO FullView Large Assembly sign - horizontal configuration with vertical divider bar. Inset flush to the surface of the sign. Large format printed inserts sit behind matte acrylic lens. Inserts should fit tight against acrylic window for optimal appearance. Window is removed from frame with a suction cup tool using a lift/pull technique.Units are the same size as the D-1 and D-1a3’-9”w x 2’-5”h
D-2b MAIN DIRECTORY, FREESTANDING, ANGLED,w/HANDHELD MAPScale: 1”=1’-0” on an 11” x 17” sheet
TOP VIEW
HANDHELD MAP HOLDERSCustom fabricated cabinet with
angled slots (flush to the surface of the cabinet to hold folded vertical
8.5” x 11” brochure inserts. Fabricator to engineer insert slots and
quantity.
2'-3"
BASEPLATESMin. 3/4” (th.) aluminum base (to match accent bars)with chemset studs stainless steel studs and hardware.
D5STANDARDS MANUAL FOR WAYFINDING SIGNAGE
D I R E C T O R YD I R E C T O R Y
S A M J A C K S O N H A L L • M A R Q UA M H I L L C A M P U S
3'-9 5/8"
3'-9 5/8"
3'-7"
2'-1 3/4"
3"
7"
1/4"
1/8"
3/4"
1/4"
3/4”
APCO FullView Large Assemblysigns - horizontal configurationMechanically fastened to wall
1/4” (th.) continuous lightweight backer. Inset 1/8” from all edges
3/4” (th.) aluminum accent bar,mechanically fastened to backer.
3/4” (th.) acrylic header, VHB tapedto backer. Edges painted to matchface.
1/4” (th.) painted acrylic panel spaced 1/8” off background
1/8” (th.) spacer
LEFT SIDE VIEW RIGHT SIDE VIEW
CONSTRUCTIONDETAIL
TOP VIEW
Custom fabricated cabinet, see details below.
DECORATIVE HEADERCustom fabricated cabinet with painted acrylic panels. Acrylic panels are mounted 1/8” off cabinet. 1/8” spacer should not be visible.
DECORATIVE FOOTER3/4” (th.) painted acrlyic header with silk-screened copy and graphics. Edges painted to match face. VHB taped to backer plate.
DIRECTORY HEADER3/4” (th.) painted acrlyic header with silk-screened copy and graphics. Edges painted to match face. VHB taped to backer plate.
DIRECTORY CABINETAPCO FullView Large Assembly sign - horizontal configuration with vertical divider bar. Mounted to backer plate, signs should be flush with Header above. Large format printed inserts sit behind matte acrylic lens. Inserts should fit tight against acrylic window for optimal appearance. Window is removed from frame with a suction cup tool using a lift/pull technique.3’-9”w x 2’-13/4”h
D-2c MAIN DIRECTORY, WALL MOUNTED, SIMPLIFIEDScale: 1”=1’-0” on an 11” x 17” sheet
INSTALLATIONSign to be mechanically fastened to wall through APCO FullView Large mounting plate.. Depending on wall condition extra backing may be required to support weight of sign.
ACCENT BARS3/4” (th.) painted aluminum accent bars mechanically fastened to backer plate.
D6STANDARDS MANUAL FOR WAYFINDING SIGNAGE
D I R E C T O R YD I R E C T O R Y
H AT F I E L D R E S E A R C H C E N T E R
~1'-1 3/4"
1'-9 1/2"
MAX. 5'-0"
1'-4 3/8"
2'-6"2'-5 1/2"
3 1/2"
1'-8 5/8"
1'-7 3/8"
2'-5"
3"
Top VIEW
DECORATIVE HEADERCustom fabricated cabinet with painted acrylic panels. Acrylic panels are mounted 1/8” off cabinet. 1/8” spacer should not be visible.
DECORATIVE FOOTERSilk-screened footer and graphics.
SUPPORT POLES3 1/2” round support poles with beveled top edges.
DIRECTORY HEADERHeader fabricated out of 1/8” (th.) aluminum silk-screened (or mask and spray) copy and graphics.
DIRECTORY CABINET UPPER UNITAPCO FullView Standard Assembly signs - horizontal configuration, mounted in a painted aluminum cabinet, flush with surface. Large format printed inserts sit behind matte acrylic lens. Inserts should fit tight against acrylic window for optimal appearance. Window is removed from frame with a suction cup tool using a lift/pull technique.FVS1826(H)
DIRECTORY CABINET LOWER UNITSimilar construction to upper unitFVS1226(H)
D-2d MAIN DIRECTORY, FREESTANDING, TALL-ANGLED,w/HANDHELD MAP, SMALLScale: 1”=1’-0” on an 11” x 17” sheet
BASEPLATESMin. 3/4” (th.) aluminum base (to match accent bars)with chemset studs stainless steel studs and hardware.
Custom cabinet fabricated out of 1/8” (th.) painted aluminum with painted 3 1/2” round support poles with beveled top edges.
D7STANDARDS MANUAL FOR WAYFINDING SIGNAGE
EXISTING CABINET
EXISTING CABINET
REPLACEMENT DIRECTORY HEADERPainted acrylic header with silk-screened text and graphics. Fabricator to confirm thinckness of existing header and replace with same size acrylic header.
D-2e MAIN DIRECTORY, WALL MOUNTED, EXISTING CABINETScale: 1”=1’-0” on an 11” x 17” sheet
INSERTSLarge format printed inserts sit behind glass windows. Inserts should fit tight against window for optimal appearance. Fabricator to remove old “slat” system and engineer backing to house inserts. Backing should fit within existing cabinet.
MEASUREMENTSOverall measurements are provided for approximate sizing. It will be the fabricators responsibility to confirm actual dimensions prior to fabrication.
S C H O O L O F N U R S I N G
S C H O O L O F N U R S I N G
APPROX 7'-2"
BUILDING DIRECTORY LISTING FIRST FLOOR BUILDING MAP EXTERIOR CAMPUS MAP
APPROX 6'-9"
APPROX2'-1 5/8"
APPROX2'-1 5/8"
APPROX2'-1 5/8"
D8STANDARDS MANUAL FOR WAYFINDING SIGNAGE
D I R E C T O R YD I R E C T O R Y
B A I R D H A L L • M A R Q UA M H I L L C A M P U S
3'-7"
2'-1 3/4"
3"
7"
3'-4 1/4"
3'-3 5/8"
3'-2 3/8"
1/4"
1/8"
3/4"
1/4"
3/4”
APCO FullView Large Assemblysigns - horizontal configurationMechanically fastened to wall
1/4” (th.) continuous lightweight backer. Inset 1/8” from all edges
3/4” (th.) aluminum accent bar,mechanically fastened to backer.
3/4” (th.) acrylic header, VHB tapedto backer. Edges painted to matchface.
1/4” (th.) painted acrylic panel spaced 1/8” off background
1/8” (th.) spacer
LEFT SIDE VIEW RIGHT SIDE VIEW
CONSTRUCTIONDETAIL
TOP VIEW Custom fabricated cabinet, see details below.
DECORATIVE HEADERCustom fabricated cabinet with painted acrylic panels. Acrylic panels are mounted 1/8” off cabinet. 1/8” spacer should not be visible.
DECORATIVE FOOTER3/4” (th.) painted acrlyic header with silk-screened copy and graphics. Edges painted to match face. VHB taped to backer plate.
DIRECTORY HEADER3/4” (th.) painted acrlyic header with silk-screened copy and graphics. Edges painted to match face. VHB taped to backer plate.
DIRECTORY CABINETAPCO FullView Large Assembly sign - horizontal configuration with vertical divider bar. Mounted to backer plate, signs should be flush with Header above. Large format printed inserts sit behind matte acrylic lens. Inserts should fit tight against acrylic window for optimal appearance. Window is removed from frame with a suction cup tool using a lift/pull technique.3’-9”w x 2’-13/4”h
D-2f MAIN DIRECTORY, WALL MOUNTED, SIMPLIFIEDScale: 1”=1’-0” on an 11” x 17” sheet
INSTALLATIONSign to be mechanically fastened to wall through APCO FullView Large mounting plate.. Depending on wall condition extra backing may be required to support weight of sign.
ACCENT BARS3/4” (th.) painted aluminum accent bars mechanically fastened to backer plate.
D9STANDARDS MANUAL FOR WAYFINDING SIGNAGE
D-3 ELEVATOR DIRECTORY DECORATIVEScale: 1”=1’-0” on an 11” x 17” sheet
Floor 9
HOSPITALELEVATORB
SIDE VIEW SECTION 1
SECTION 2
Floor 9
HOSPITALELEVATORB
Use these elevators to access thefollowing destinations.
Cafe 9
Care Management 9
Center for Learning/Development 14
Clinical Technology Services 1
CT Scan 8
Diagnostic Radiology 10
EMERGENCY 8
Environmental Services 1
Express Admit Unit 5
Facilities Operations 1
Food & Nutrition 3
Gift Shop 9
Hemodialysis 4
Hospital Administration 8
Information 9
MRI 10
Rehabilitation Services 8
Patient Access Services 9
Patient Advocate 9
Radiology 10
Volunteer Services 9
DESTINATION FLOOR
Floor 9
KOHLER OUTPATIENTELEVATOR
Use these elevators to access thefollowing destinations.
Cafe 9
Care Management 9
Center for Learning/Development 14
Clinical Technology Services 1
CT Scan 8
Diagnostic Radiology 10
EMERGENCY 8
Environmental Services 1
Express Admit Unit 5
Facilities Operations 1
Food & Nutrition 3
Gift Shop 9
Hemodialysis 4
Hospital Administration 8
Information 9
MRI 10
Rehabilitation Services 8
Patient Access Services 9
Patient Advocate 9
Radiology 10
Volunteer Services 9
DESTINATION FLOOR
Floor 9
EMERGENCY ELEVATOR
Use these elevators to access thefollowing destinations.
Cafe 9
Care Management 9
Center for Learning/Development 14
Clinical Technology Services 1
CT Scan 8
Diagnostic Radiology 10
EMERGENCY 8
Environmental Services 1
Express Admit Unit 5
Facilities Operations 1
Food & Nutrition 3
Gift Shop 9
Hemodialysis 4
Hospital Administration 8
Information 9
MRI 10
Rehabilitation Services 8
Patient Access Services 9
Patient Advocate 9
Radiology 10
Volunteer Services 9
DESTINATION FLOOR
Floor 9
HATFIELDELEVATORG
Use these elevators to access thefollowing destinations.
Cafe 9
Care Management 9
Center for Learning/Development 14
Clinical Technology Services 1
CT Scan 8
Diagnostic Radiology 10
EMERGENCY 8
Environmental Services 1
Express Admit Unit 5
Facilities Operations 1
Food & Nutrition 3
Gift Shop 9
Hemodialysis 4
Hospital Administration 8
Information 9
MRI 10
Rehabilitation Services 8
Patient Access Services 9
Patient Advocate 9
Radiology 10
Volunteer Services 9
DESTINATION FLOOR
TOP VIEW
CUSTOM ELEMENTS:HEADER: Custom fabricated cabinet with painted acrylic panels. Acrylic panels are mounted directly to backer plate.
SIDE RAILS: Constructed from extruded aluminum parts and painted.
CABINET:APCO FullView FVS2418(H)MF - horizontal configuration, pin to be installed in the upper left position (with no pin), mounted to acrylic panel. Large format printed insert sits behind matte acrylic lens. Insert should fit tight against acrylic window for optimal appearance. Window is removed from frame with a suction cup tool using a lift/pull technique. Cabinet to be surface flush with decorative header above.
BACKER PLATE:1/4” (th.) acrylic panel, inset 1/4” from edges (only behind middle part of sign.
FOOTER: Acrylic panel with silk-screened graphics. Panel surface to be flush with decorative header and cabinet above.
See detail drawing for sections and specifications.
HEADER FONT:Myriad Pro Semibold Condensed @ 25% kerning. Set for Optical kerning. Text is in all capital letters.
FOOTER FONT:Myriad Pro Condensed @ 25% kerning. Set for Optical kerning.
1 3/8"
1 5/8" 1 3/8"2 1/8"
1'-6"1'-5 1/2"
1'-8 3/4"3/4"
1/2"
2'-9 1/2"2'-0"
2 1/2"
5"
1 1/2"
1"
2'-11"
D10STANDARDS MANUAL FOR WAYFINDING SIGNAGE
D-3a ELEVATOR DIRECTORYScale: 1”=1’-0” on an 11” x 17” sheet
Scale: 2”=1’-0” on an 11” x 17” sheet
Floor 10
MULTNOMAHELEVATORA
Floor 10
MULTNOMAHELEVATORA
Floor 1
SAM JACKSONELEVATOR
Floor 1
PHYSICIANS PAVILIONELEVATOR
Floor 3
DOERNBECHERELEVATOR
A
Floor 10
MULTNOMAHELEVATORA
PHYSICIANS PAVILIONELEVATOR
4 1/4"
3 1/4"
6 5/8"
1 3/8"
1 1/4"
1 3/8"
1 1/4"
SIDE VIEW FRONT VIEW
HEADER AND FOOTER DETAILS
To matchthicknessof APCO
sign frame,approx 1/2”.
TOP VIEW
BACKER PLATE: Constructed from 1/8" (th.) acrylic, inset 1/4” from edges
HEADER:Acrylic panel with silk-screened graphics. Panel thickness to equal thickness of APCO sign frame. Panel is mounted to backer panel.
CABINET:APCO FullView FVS2418(H)MF - horizontal configuration, pin to be installed in the upper left position (with no pin), mounted to acrylic panel. Large format printed insert sits behind matte acrylic lens. Insert should fit tight against acrylic window for optimal appearance. Window is removed from frame with a suction cup tool using a lift/pull technique. Cabinet to be surface flush with decorative header above.
FOOTER: Acrylic panel with silk-screened graphics. Panel thickness to equal thickness of APCO sign frame. Panel is mounted to backer panel.
HEADER FONT:Myriad Pro Semibold Condensed @ 25% kerning. Set for Optical kerning. Text is in all capital letters.
FOOTER FONT:Myriad Pro Condensed @ 25% kerning. Set for Optical kerning.
1 3/8"
Use these elevators to access thefollowing destinations.
Cafe 9
Care Management 9
Center for Learning/Development 14
Clinical Technology Services 1
CT Scan 8
Diagnostic Radiology 10
EMERGENCY 8
Environmental Services 1
Express Admit Unit 5
Facilities Operations 1
Food & Nutrition 3
Gift Shop 9
Hemodialysis 4
Hospital Administration 8
Information 9
MRI 10
Rehabilitation Services 8
Patient Access Services 9
Patient Advocate 9
Radiology 10
Volunteer Services 9
DESTINATION FLOOR
Use these elevators to access thefollowing destinations.
Cafe 9
Care Management 9
Center for Learning/Development 14
Clinical Technology Services 1
CT Scan 8
Diagnostic Radiology 10
EMERGENCY 8
Environmental Services 1
Express Admit Unit 5
Facilities Operations 1
Food & Nutrition 3
Gift Shop 9
Hemodialysis 4
Hospital Administration 8
Information 9
MRI 10
Rehabilitation Services 8
Patient Access Services 9
Patient Advocate 9
Radiology 10
Volunteer Services 9
DESTINATION FLOOR
Use these elevators to access thefollowing destinations.
Cafe 9
Care Management 9
Center for Learning/Development 14
Clinical Technology Services 1
CT Scan 8
Diagnostic Radiology 10
EMERGENCY 8
Environmental Services 1
Express Admit Unit 5
Facilities Operations 1
Food & Nutrition 3
Gift Shop 9
Hemodialysis 4
Hospital Administration 8
Information 9
MRI 10
Rehabilitation Services 8
Patient Access Services 9
Patient Advocate 9
Radiology 10
Volunteer Services 9
DESTINATION FLOOR
Use these elevators to access thefollowing destinations.
Cafe 9
Care Management 9
Center for Learning/Development 14
Clinical Technology Services 1
CT Scan 8
Diagnostic Radiology 10
EMERGENCY 8
Environmental Services 1
Express Admit Unit 5
Facilities Operations 1
Food & Nutrition 3
Gift Shop 9
Hemodialysis 4
Hospital Administration 8
Information 9
MRI 10
Rehabilitation Services 8
Patient Access Services 9
Patient Advocate 9
Radiology 10
Volunteer Services 9
DESTINATION FLOOR
1/8"
2'-7 1/2"
5"
2'-0"
2 1/2"
1'-6"1/2"1/8"
D11STANDARDS MANUAL FOR WAYFINDING SIGNAGE
D-3b ELEVATOR DIRECTORY, INSIDE CABScale: 1”=1’-0” on an 11” x 17” sheet
D-3c ELEVATOR DIRECTORY, INSIDE CABScale: 1”=1’-0” on an 11” x 17” sheet
D-3e PHYSICIAN DIRECTORYScale: 1”=1’-0” on an 11” x 17” sheet
Use this elevator to access thefollowing destinations.
Cafe 9
Care Management 9
Center for Learning/Development 14
Clinical Technology Services 1
CT Scan 8
Diagnostic Radiology 10
EMERGENCY 8
Environmental Services 1
Express Admit Unit 5
Facilities Operations 1
Food & Nutrition 3
Gift Shop 9
Hemodialysis 4
Hospital Administration 8
Information 9
MRI 10
Rehabilitation Services 8
Patient Access Services 9
Patient Advocate 9
Radiology 10
Volunteer Services 9
Orthopedics 10
Ultra Sound 10
DESTINATION FLOOR
Use this elevator to access thefollowing destinations.
Cafe 9
Care Management 9
Center for Learning/Development 14
Clinical Technology Services 1
CT Scan 8
Diagnostic Radiology 10
EMERGENCY 8
Environmental Services 1
Express Admit Unit 5
Facilities Operations 1
Food & Nutrition 3
Gift Shop 9
Hemodialysis 4
Hospital Administration 8
Information 9
DESTINATION FLOOR
1-0"
PHYSICIANS LISTINGCafe 9
Care Management 9
Center for Learning/Development 14
Clinical Technology Services 1
CT Scan 8
Diagnostic Radiology 10
EMERGENCY 8
Environmental Services 1
Express Admit Unit 5
Facilities Operations 1
Food & Nutrition 3
Gift Shop 9
Hemodialysis 4
Hospital Administration 8
Information 9
MRI 10
Rehabilitation Services 8
Patient Access Services 9
Patient Advocate 9
Radiology 10
Volunteer Services 9
Orthopedics 10
Ultra Sound 10
Cafe 9
Care Management 9
Center for Learning/Development 14
Clinical Technology Services 1
CT Scan 8
Diagnostic Radiology 10
EMERGENCY 8
Environmental Services 1
Express Admit Unit 5
Facilities Operations 1
Food & Nutrition 3
Gift Shop 9
Hemodialysis 4
Hospital Administration 8
Information 9
MRI 10
Rehabilitation Services 8
Patient Access Services 9
Patient Advocate 9
Radiology 10
Volunteer Services 9
Orthopedics 10
Ultra Sound 10
SIDE VIEW
TOP VIEW
BACKER PLATE: Constructed from 1/8" (th.) acrylic, inset 1/4” from edges.
SIGN FRAME:APCO FullView FVL2524(H)MF - horizontal configuration, pin to be installed in the upper left position (with no pin), mounted to acrylic panel. Large format printed insert sits behind matte acrylic lens. Insert should fit tight against acrylic window for optimal appearance. Window is removed from frame with a suction cup tool using a lift/pull technique.
BACKER PLATE: Constructed from 1/8" (th.) acrylic, inset 1/4” from edges.
SIGN FRAME:APCO FullView FVS1212(H)MF - horizontal configuration, pin to be installed in the upper left position (with no pin), mounted to acrylic panel. Large format printed insert sits behind matte acrylic lens. Insert should fit tight against acrylic window for optimal appearance. Window is removed from frame with a suction cup tool using a lift/pull technique.
BACKER PLATE: Constructed from 1/8" (th.) acrylic, inset 1/4” from edges.
SIGN FRAME:APCO FullView FVS2212(H)MF - horizontal configuration, pin to be installed in the upper left position (with no pin), mounted to acrylic panel. Large format printed insert sits behind matte acrylic lens. Insert should fit tight against acrylic window for optimal appearance. Window is removed from frame with a suction cup tool using a lift/pull technique.
TOP VIEW TOP VIEW
1'-0"
1'-10"
5/8"1/8"
1/2"1/8"
1'-0"
4"
2'-1"
2'-0"
1/2"1/8"
D12STANDARDS MANUAL FOR WAYFINDING SIGNAGE
D-3f CUSTOM ELEVATOR DIRECTORYScale: 1”=1’-0” on an 11” x 17” sheet
Floor 3
G
Floor 3
Floor 3
HATFIELD ELEVATORGHATFIELD ELEVATOR4 1/4"
3 1/4"
6 5/8"
G HATFIELD ELEVATOR 1 3/4"2"
SIDE VIEW
HEADER AND FOOTER DETAILS
To matchthicknessof APCO
sign frame,approx 1/2”.
TOP VIEW
BACKER PLATE: Constructed from 1/8" (th.) acrylic, inset 1/4" from edges
HEADER:Acrylic panel with silk-screened graphics. Panel thickness to equal thickness of APCO sign frame. Panel is mounted to backer panel.
CABINET:Custom 32" x 10 1/2" APCO FullView sign frame with square edges - horizontal configuration, pin to be installed in the upper left position (with no pin), mounted to acrylic panel. Large format printed insert sits behind matte acrylic lens. Insert should fit tight against acrylic window for optimal appearance. Window is removed from frame with a suction cup tool using a lift/pull technique. Cabinet to be surface flush with decorative header above.
FOOTER: Acrylic panel with silk-screened graphics. Panel thickness to equal thickness of APCO sign frame. Panel is mounted to backer panel.
HEADER FONT:Myriad Pro Semibold Condensed @ 25% kerning. Set for Optical kerning. Text is in all capital letters.
FOOTER FONT:Myriad Pro Condensed @ 25% kerning. Set for Optical kerning.
1 3/8"
FRONT VIEW
Use these elevators to access the following destinations.
Cafe 9
Care Management 9
Center for Learning/Development 14
Clinical Technology Services 1
CT Scan 8
Diagnostic Radiology 10
EMERGENCY 8
DESTINATION FLOOR DESTINATION FLOOR
Environmental Services 1
Express Admit Unit 5
Facilities Operations 1
Food & Nutrition 3
Gift Shop 9
Hospital Administration 8
Information 9
Scale: 2”=1’-0” on an 11” x 17” sheet
1/8"
5"
2 1/2"
1/2"1/8"
10 1/2"1'-6"
2'-8"
D13STANDARDS MANUAL FOR WAYFINDING SIGNAGE
D-3g ELEVATOR DIRECTORYScale: 1”=1’-0” on an 11” x 17” sheet
Scale: 2”=1’-0” on an 11” x 17” sheet
Floor 1
SCHOOL OF NURSINGELEVATOR
Floor 1
SCHOOL OF NURSINGELEVATOR
Floor 1
SCHOOL OF NURSINGELEVATOR
1 3/8"
1 1/4"
1'-4 1/2"
1'-4 1/2"
SIDE VIEW FRONT VIEW
HEADER AND FOOTER DETAILS
To matchthicknessof APCO
sign frame,approx 1/2”.
TOP VIEW
BACKER PLATE: Constructed from 1/8" (th.) acrylic, inset 1/4” from edges
HEADER:Acrylic panel with silk-screened graphics. Panel thickness to equal thickness of APCO sign frame. Panel is mounted to backer panel.
CABINET:APCO FullView FVS2416.5(H)MF - horizontal configuration, pin to be installed in the upper left position (with no pin), mounted to acrylic panel. Large format printed insert sits behind matte acrylic lens. Insert should fit tight against acrylic window for optimal appearance. Window is removed from frame with a suction cup tool using a lift/pull technique. Cabinet to be surface flush with decorative header above.
FOOTER: Acrylic panel with silk-screened graphics. Panel thickness to equal thickness of APCO sign frame. Panel is mounted to backer panel.
HEADER FONT:Myriad Pro Semibold Condensed @ 25% kerning. Set for Optical kerning. Text is in all capital letters.
FOOTER FONT:Myriad Pro Condensed @ 25% kerning. Set for Optical kerning.
1 3/8"
Use these elevators to access thefollowing destinations.
Cafe 9
Care Management 9
Center for Learning/Development 14
Clinical Technology Services 1
CT Scan 8
Diagnostic Radiology 10
EMERGENCY 8
Environmental Services 1
Express Admit Unit 5
Facilities Operations 1
Food & Nutrition 3
Gift Shop 9
Hemodialysis 4
Hospital Administration 8
Information 9
MRI 10
Rehabilitation Services 8
Patient Access Services 9
Patient Advocate 9
Radiology 10
Volunteer Services 9
DESTINATION FLOOR
1/8"
2'-7 1/2"
5"
2'-0"
2 1/2"
1/2"1/8"
D14STANDARDS MANUAL FOR WAYFINDING SIGNAGE
D-4 STRIP MAP w/ GUIDE INFO, DECORATIVEScale: 1”=1’-0” on an 11” x 17” sheet
D-4a STRIP MAP, DECORATIVEScale: 1”=1’-0” on an 11” x 17” sheet
Cafe
Elevators
Gift Shop
Information
Public Pathways
Restrooms
Hospital CElevators
ToDoernbecherChildren’sHospital
SurgeryWaiting
Patient Relations
ToKohler PavilionTram
YouAreHere
C
Information
DoernbecherChildren’sHospital
Hatf ieldResearch Ctr
KohlerPavilion
Tram
You are in the Hospital Floor 9
SIDE VIEW
SECTION 1
SECTION 2
Cafe
Elevators
Gift Shop
Information
Public Pathways
Restrooms
Hospital CElevators
ToDoernbecherChildren’sHospital
SurgeryWaiting
Patient Relations
ToKohler PavilionTram
YouAreHere
C
Information
You are in the Hospital Floor 9 You are in the Hospital Floor 9You are in the Hospital Floor 9
CUSTOM ELEMENTS:HEADER: Fabricated from painted, layered acrylic panels attached to backer panel with VHB tape.
SIDE RAILS: Constructed from extruded aluminum parts and painted.
FOOTER: Acrylic panel with silk-screened graphics. Panel surface to be flush with decorative header and cabinet above.
See guide detail page for sections and specifications.
SIGN FRAME:APCO FullView FVS2234(H)MF - horizontal configuration, pin to be installed in the upper left position (with no pin), mounted to acrylic panel. Large format printed insert sits behind matte acrylic lens. Insert should fit tight against acrylic window for optimal appearance. Window is removed from frame with a suction cup tool using a lift/pull technique. Cabinet to be surface flush with decorative header above.
Similar construction to D-4
SIGN FRAME:APCO FullView FVS2224(H)MF - horizontal configuration, pin to be installed in the upper left position (with no pin), mounted to acrylic panel. Large format printed insert sits behind matte acrylic lens. Insert should fit tight against acrylic window for optimal appearance. Window is removed from frame with a suction cup tool using a lift/pull technique. Cabinet to be surface flush with decorative header above.
TOP VIEW
2'-10"
2'-0"10"
1/2"
2'-0"
2'-2 1/2"
1'-11 1/2"
1 1/2"
2 3/8"
2'-3 7/8"
1"
3'-1/2"
2'-9 1/2"
D15STANDARDS MANUAL FOR WAYFINDING SIGNAGE
D-4b STRIP MAP w/GUIDE INFOScale: 1”=1’-0” on an 11” x 17” sheet
D-4c STRIP MAPScale: 1”=1’-0” on an 11” x 17” sheet
Cafe
Elevators
Gift Shop
Information
Public Pathways
Restrooms
Hospital CElevators
ToDoernbecherChildren’sHospital
SurgeryWaiting
Patient Relations
ToKohler PavilionTram
YouAreHere
C
Information
DoernbecherChildren’sHospital
Hatf ieldResearch Ctr
KohlerPavilion
Tram
You are in the Hospital Floor 9
SIDE VIEW
You are in the Hospital Floor 9
Cafe
Elevators
Gift Shop
Information
Public Pathways
Restrooms
Hospital CElevators
ToDoernbecherChildren’sHospital
SurgeryWaiting
Patient Relations
ToKohler PavilionTram
YouAreHere
C
Information
You are in the Hospital Floor 9 You are in the Hospital Floor 9
BACKER PLATE:1/8” Acrylic panel mounted to the wall.
SIGN FRAME:APCO FullView FVS2234(H)MF - horizontal configuration, pin to be installed in the upper left position (with no pin), mounted to acrylic panel. Large format printed insert sits behind matte acrylic lens. Insert should fit tight against acrylic window for optimal appearance. Window is removed from frame with a suction cup tool using a lift/pull technique. Cabinet to be surface flush with decorative header above.
FOOTER: Acrylic panel with silk-screened graphics. Panel surface to be flush with decorative header and cabinet above.
See guide detail page for sections and specifications.
Similar construction to D-4b
SIGN FRAME:APCO FullView FVS2224(H)MF - horizontal configuration, pin to be installed in the upper left position (with no pin), mounted to acrylic panel. Large format printed insert sits behind matte acrylic lens. Insert should fit tight against acrylic window for optimal appearance. Window is removed from frame with a suction cup tool using a lift/pull technique. Cabinet to be surface flush with decorative header above.
TOP VIEWTo match thickness
of APCO sign frame,aprox 3/8”
2'-10"
2'-0"10" 2'-0"1'-11 1/2"
2'-9 1/2"
1/8"
1'-10 1/2"
2 3/8"
2'-7/8"
D16STANDARDS MANUAL FOR WAYFINDING SIGNAGE
D-5 TRANSITIONAL ELEMENTSScale: 1”=1’-0” on an 11” x 17” sheet
TOP VIEW
SIDE VIEW
D-5 TRANSITIONAL ELEMENTSSign is fabricated from 1/4" (th.) paintedKomacel panel with 1/4" (th.) painted acrylicaccent bars. Letters are 1/4" (th.) acrylicpainted white.
Size may vary from location to location. Corbin to provide an estimate for size. Fabricator to verify width on-site prior to fabrication.
H AT FI E L D R E S E A R C H C E N T E R M U LT N O M A H PAV I L I O N • F L O O R 3
D O E R N B E C H E R C H I L D R E N ’ S H O S P I TA L
D O E R N B E C H E R C H I L D R E N ’ S H O S P I TA L
M U LT N O M A H PAV I L I O N • F L O O R 3
3 1/4" 2 3/4"
D17STANDARDS MANUAL FOR WAYFINDING SIGNAGE