introduction of fujitsu fp-2000 series standalone pos ... · receipt printer is moving to the...
TRANSCRIPT
Copyright 2017 FUJITSU LIMITED
FUJITSU Isotec Proprietary & ConfidentialAll Rights Reserved, Copyright (C) FUJITSU Isotec Limited 2017
Introduction of FUJITSU FP-2000 series
Standalone POS Printer(Rev.04)
Market Status – POS PrinterThermal printer market especially for POS system is very competitive one, but still growing by 10% per year.
POS printer shipment
Copyright 2017 FUJITSU LIMITED1
Receipt printer is moving to the mobile POS system using Tablet PC. Not only receipt printing, but also this printer can be used in the various business scenes as below. These user environments pursue;
- Small dimension equipment- Utility and Driver for various applications- Wireless interfaces like Bluetooth and WiFi.
Retail Business Trend
Small shops(Mobile POS system)
Convenience Store(POS system) Gas Station
(Kiosk Machine) Printer mounted inPOS system
Mobile POS systemPrinter inside Kiosk machine
Library(Kiosk Machine)
Copyright 2017 FUJITSU LIMITED2
Copyright 2017 FUJITSU LIMITED
FP-2000 series Design Concept5years past from launching FP-1000 series, and time to release a new Printer!
3 lineups to match your each customer’s requirement
- Ultra High Speed (FP-2200)Flagship printer to appeal FIT’s technological strength
- High speed(FP-2100)To enter High-end market that FP-1000 could not win.
- Low and Middle range speed(FP-2000) To expand the business in the low and the middle range market
that we learned with FP-1000 to enter this market.
3
Appearance(1)
128mm(W) x 170mm(D) x 125mm(H) 144mm(W) x 184mm(D) x 120mm(H)
FP-1000 FP-2000
15% Volume Down
Stylish Body design, Compact & Small Footprint
Copyright 2017 FUJITSU LIMITED4
Wall hanging function with only two screwsNo option is necessary to hang this printer on the wall excepttwo screws.
All in One BoxAC Adapter, AC Cable, USB Cable attached.
Copyright 2017 FUJITSU LIMITED
Appearance(2)
5
400mm/sec, Highest Speed Printing in the market
FP-2000 230mm/s FP-2100 300mm/s FP-2200 400mm/s
High Reliability, Cutter Life Maximum 3million cuts
FP-2000 1.5 million cuts FP-2100 2.0 million cuts FP-2200 3.0 million cuts (T.B.D)
Mechanical New Feature(1)FP-2200 is designed to achieve the highest technology in this class.FP-2000 and 2100 have also high speed and cost-effective.
Copyright 2017 FUJITSU LIMITED6
Mechanical New Feature(2) -Interface Configuration for FP2000 series
Copyright 2017 FUJITSU LIMITED
Main board for FP2000 series
USB
I/F
AC
RS232C (25Pin) I/F card
Powered USB I/F card
RS232C (9pin) + Wired LAN I/F card
Wired LAN I/F card
Bluetooth I/F card
Optional cards
< FP1000 I/F >
Triple I/F modelUSB+RS232(9pin)+WireLAN I/F
Dual I/F modelUSB+RS232(25pin) I/F
Bluetooth I/F modelUSB+Bluetooth I/F
Draw
er
Wireless LAN I/F card
*TBD
*FP-2100/FP-2200
*FP-2100/FP-2200
Optional Cards: Dealer Option
7
loosens the curl of paper roll especially when the end of paper roll is printed. (FP-2200 only)
Copyright 2017 FUJITSU LIMITED
Mechanical New Feature(3)- Paper Curl Adjust Function
Actual test results after curl adjusting
Φ25mm
<Test Condition> Paper length 15cm, Measured 5 minutes after adjustment
This effect differs depending on humidity, temperature and on your using environment
Paper remaining 0.5m from the end Paper remaining 2.0m from the end
Φ40mm Φ35mm Φ40mm
8
Copyright 2017 FUJITSU LIMITED
Mechanical Feature(4)- Black Mark / Paper Exit SensorBlack Mark Sensor or Paper Exit Sensor can be mounted as a factory option. (FP-2200 only)
Paper Exit Sensor detects the paper fed out.
Black Mark Sensor senses the Black mark on the back of paper
One sheet exited, next sheet fed out.
Black Mark Paper roll
9
Mechanical New Feature(5) Thin paper printing available
FP-1000: 65μm~
FP-2000: 53μm~
Eco DesignPower Consumption is 0.9W at waiting mode
Copyright 2017 FUJITSU LIMITED10
looks almost similar to 180dpi (7dots/mm)Font, and is easy to replace the other major competitor’s printer.
Copyright 2017 FUJITSU LIMITED
Software New Feature(1) 180 dpi font mode
Epson TM-T88 FP-1000 203dpiFP-2000 180dpi font
With 203dpi thermal head
Same sizeAs TM-T88
Gap occurred
11
16 Gray Scale printing via Windows Driver & OPOS Driver (FP-2100&FP-2200)
Copyright 2017 FUJITSU LIMITED
Software New Feature(2)- 16Gray Scale print
Coupon
ID Card For reference in Chart
Patient’s chart
12
Software New Feature(3)- FirmwareFirmware features Optimum power printing Printer calculates the density of print data before printing.
Depending on the print density, Printer controls power and speed to print clearly.
VT Compression setting Print data is compressed vertically by Setup setting. Driver setting is not necessary, and it can save the paper.
Increasing buffer of receiving data
Storing logo increase up to 1088KBytes(FP-2100 & FP-2200)
Retry print When printer fails to print, the print data remaining in printer is reprinted.FP-2100: approx.40cm, FP-2200: approx. 200cm (FP-2000:N/A) RAM
Cutter cleaning mode Enter into Maintenance mode, open the cover, and Cutter automatically appears. After cleaning, just close the cover. (FP-1000 needs to rotate the dial by hand.)
Log function Printer internal data process can be logged by using Log tool. It judges whether the problem is occurred in Printer or other causes.
Mute mode For application programmers, Buzzer sound can be set “no sound” during testing
Copyright 2017 FUJITSU LIMITED13
Driver Features
No need to uninstall FP-1000 drivers and utilities
FP-2000 series printer can be used without replacement of driver from FP-1000 series if the user does not want to change settings including Android / iOS SDK
Multi font printing via OPOS driver
Same as Windows Driver, any fonts in Windows (True type font) printing is available.
Enhancement of sample code for application development (TBA)
For Windows application programmers, sample code is added.
IP address central setting tool(TBA)
One PC can set IP address for plural printers on the same LAN environment.
Adding Java Script library ‒ Web Print
(TBA)
Not relying on OS, Printing is available via Web Browser. (LAN interface only)
Software New Feature(4)- Drivers and utilities
Copyright 2017 FUJITSU LIMITED14
Feature FP-2000 FP-2100 FP-2200
Paper Curl Adjustment - - P
180dpi font mode P P P
2D Barcode QR QR, PDF417, DataMatrix
QR, PDF417, DataMatrix
Memory size(Flash ROM) 576KBytes 1088KBytes 1088KBytesFull/Partial Cut - - P
16Gray Scale printing - P P
Speed 230mm/s 300mm/s 400 mm/sCutter Life 1.5 million cuts 2million cuts 3million cuts(T.B.D)Eco Design (0.8w at waiting-target) P P P
Retry Printing(RAM) - Max 40cm Max 200cm
Super Green Product certified P P P
Black Mark Sensor / Paper Exit Sensor (Factory Option)
- - P
Powered USBWireless LAN(FCS TBA)
- P P
Copyright 2017 FUJITSU LIMITED
FP-2000 series: Chart of new features
15
Copyright 2017 FUJITSU LIMITED
Brief Chart of FUJITSU FP-2000 series compared to FP-1000
16
Comparison Chart – FP-2000
Copyright 2017 FUJITSU LIMITED17
Comparison Chart – FP-2100
Copyright 2017 FUJITSU LIMITED18
Comparison Chart – FP-2200
Copyright 2017 FUJITSU LIMITED19
FP-2000 Series Release Schedule
*1 Evaluation Model shows only appearance.*2 Bluetooth Optional I/F for Europe and North America is ready.
Bluetooth I/F needs each country’s Wireless EMI regulation. Please let us know the required country.
Copyright 2017 FUJITSU LIMITED20
Bulk packing
Copyright 2017 FUJITSU LIMITED
Other Sales Conditions – Packing for shipment
Model name FP-2000 FP-2100 FP-2200
Description with AC adaptor/AC cable/USB cable
with AC adaptor/AC cable/USB cable
with AC adaptor/AC cable/USB cable
One printer size with
packing box
Dimension(WxDxH) 224x219x210(mm) 224x219x210(mm) 224x219x210(mm)Weight 2.1(kg) 2.1(kg) 2.1(kg)
Sea
One pallet
Quantity 160units (20x8 units) 160units (20x8 units) 160units (20x8 units)Weight Net 336.0 (kg) 336.0 (kg) 336.0 (kg)
Gross 346.0 (kg) 346.0 (kg) 346.0 (kg)Dimension(WxDxH) 1110x910x1800 (mm) 1110x910x1800 (mm) 1110x910x1800 (mm)
20 feet
container
Pallet QTY 12(pallets) 12(pallets) 12(pallets)
Printer QTY1,920(units) 1,920(units) 1,920(units)
40 feet
container
Pallet QTY 24(pallets) 24(pallets) 24(pallets)
Printer QTY3,840 (units) 3,840 (units) 3,840 (units)
Air One pallet
Quantity 140units (20x7 units) 140units (20x7 units) 140units (20x7 units)
WeightNet 294.0 (kg) 294.0 (kg) 294.0 (kg)
Gross 304.0 (kg) 304.0 (kg) 304.0 (kg)
Dimension(WxDxH) 1110x910x1590 (mm) 1110x910x1590 (mm) 1110x910x1590 (mm)
21