iso update · iso update, supplement to iso ... — magnetic particle testing 2015-06-20 ... hose...

ISO Update Supplement to ISOfocus

April 2015

ISO Update, Supplement to ISO Focus -- April 2015 1

International Standards in process

An International Standard is the result of an agreement between the member bodies of ISO. A first important step towards an Interna-tional Standard takes the form of a committee draft (CD) - this is cir-culated for study within an ISO technical committee. When consensus has been reached within the technical committee, the document is sent to the Central Secretariat for processing as a draft International Standard (DIS). The DIS requires approval by at least 75 % of the member bodies casting a vote. A confirmation vote is subsequently carried out on a final draft International Standard (FDIS), the approval criteria remaining the same.

CD registered

Period from 01 March to 31 March 2015

These documents are currently under consideration in the technical committee.

They have been registred at the Central Secretariat.

TC 4 Rolling bearings

ISO/CD 20056-1

Rolling bearings — Load ratings for hybrid bearings with rolling elements made of ceramic — Part 1: Dynamic load ratings

TC 12 Quantities and units

ISO/CD 80003-2

Physiological quantities and their units — Part 2: Physics

ISO/CD 80003-3

Physiological quantities and their units — Part 3: Chemistry

TC 23 Tractors and machinery for agriculture and forestry

ISO/CD 20112 Tractors and machinery for agriculture and forestry - Camera interface between tractor and implement

TC 29 Small tools

ISO/CD 1085 Assembly tools for screws and nuts — Double-ended wrenches — Size pairing

ISO/CD 3318 Assembly tools for screws and nuts — Double-headed open-ended wrenches, double-headed box wrenches and combination wrenches — Maximum widths of heads

ISO/CD 4229 Assembly tools for screws and nuts — Single-head engineer's wrenches for lower torque applications — Maximum outside dimensions of heads and test torques

TC 43 Acoustics

ISO/CD 17208-2

Underwater acoustics — Quantities and procedures for description and measurement of underwater noise from ships — Part 2: De-termination of source levels

TC 44 Welding and allied processes

ISO/CD 3580 Welding consumables — Covered electrodes for manual metal arc welding of creep-resisting steels — Classification

ISO/CD 17633 Welding consumables — Tubular cored elec-trodes and rods for gas shielded and non-gas shielded metal arc welding of stainless and heat-resisting steels — Classification

ISO/CD 20378 Welding consumables — Rods for gas weld-ing of non alloy and creep resisting steels — Classification

TC 45 Rubber and rubber products

ISO/CD 19984-1

Rubber and rubber products — Determination of biobased content — Part 1: General princi-ples and calculation methods using formulation

ISO/CD 19984-2

Rubber and rubber products — Determina-tion of biobased content — Part 2: Biobased carbon content

ISO/CD 19984-3

Rubber and rubber products — Determination of biobased content — Part 3: Biobased mass content

ISO/CD 20163 Vulcanized rubber — Determination of free sulfur by gaz-phase chromatography (GC) and high performance liquid chromatography (HPLC)

TC 46 Information and documentation

ISO/DTS 18344

Effectiveness of paper deacidification processes

TC 54 Essential oils

ISO/CD 19817 Essential oil of thyme [Thymus vulgaris L.]

TC 61 Plastics

ISO/CD 9994 Lighters — Safety specification

ISO/CD 22702 Utility lighters — General consumer-safety requirements

TC 85 Nuclear energy, nuclear technologies, and radiological protection

ISO/CD 4037-1 X and gamma reference radiation for calibrat-ing dosemeters and doserate meters and for determining their response as a function of photon energy — Part 1: Radiation characteris-tics and production methods

ISO/CD 4037-2 X and gamma reference radiation for calibrat-ing dosemeters and doserate meters and for determining their response as a function of photon energy — Part 2: Dosimetry for radia-tion protection over the energy ranges from 8 keV to 1,3 MeV and 4 MeV to 9 MeV

ISO/CD 4037-3 X and gamma reference radiation for calibrat-ing dosemeters and doserate meters and for determining their response as a function of photon energy — Part 3: Calibration of area and personal dosemeters and the measure-ment of their response as a function of energy and angle of incidence

ISO/CD 4037-4 X and gamma reference radiation for calibrat-ing dosemeters and doserate meters and for determining their response as a function of photon energy — Part 4: Calibration of area and personal dosemeters in low energy X refer-ence radiation fields

ISO/CD 19581 Measurement of radioactivity — Gamma emit-ting radionuclides — Rapid test method using NaI(Tl) gamma-ray spectrometry

TC 89 Wood-based panels

ISO/CD 27769 Wood-based panels — Wet-process fibreboard

TC 108 Mechanical vibration, shock and condi-tion monitoring

2 ISO Update, Supplement to ISO Focus -- April 2015

ISO/CD 16063-17

Methods for the calibration of vibration and shock transducers — Part 17: Primary calibra-tion by centrifuge

TC 121 Anaesthetic and respiratory equipment

ISO/CD 80601-2-55

Medical electrical equipment — Part 2-55: Particular requirements for the basic safety and essential performance of respiratory gas monitors

TC 123 Plain bearings

ISO/CD 20054 Plain bearings — Bearings containing dis-persed solid lubricants

TC 130 Graphic technology

ISO/CD 13655 Graphic technology — Spectral measurement and colorimetric computation for graphic arts images

TC 131 Fluid power systems

ISO/DTS 13725

Hydraulic fluid power — Method for evaluating cylinder bucklingload

TC 147 Water quality

ISO/CD 5667-12

Water quality — Sampling — Part 12: Guidance on sampling of bottom sediments

TC 150 Implants for surgery

ISO/DTR 19024

Evaluation of CPB devices relative to their capabilities of reducing the transmission of Gaseous MicroEmboli(GME)to a patient during cardiopulmonary bypass

TC 181 Safety of toys

ISO 8124-1:2014/CD Amd 3

Safety of toys — Part 1: Safety aspects related to mechanical and physical properties — Amendment 3: Warnings and fibrous filling material

TC 184 Automation systems and integration

ISO/CD 15746-2

Automation systems and integration — Integra-tion of advanced process control and optimi-zation capabilities for manufacturing systems — Part 2: Activity models and information exchange

TC 193 Natural gas

ISO/DTR 29922

Natural Gas — Supporting information on the calculation of physical properties according to ISO 6976

TC 197 Hydrogen technologies

ISO/CD 19880-2

Gaseous hydrogen — Fueling stations — Part 2: Dispensers

ISO/CD 19880-3

Gaseous hydrogen — Fueling stations — Part 3: Valves

TC 204 Intelligent transport systems

ISO/CD 17185-2

Intelligent transport systems — Public trans-port user information — Part 2: Data and inter-face standards catalogue and cross reference

TC 206 Fine ceramics

ISO/CD 19606 Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for surface roughness of fine ceramic films by atomic force microscopy

TC 207 Environmental management

ISO/CD 14052 Environmental management - Material flow cost accounting - Guidance for practical imple-mentation in a supply chain

TC 217 Cosmetics

ISO/DTR 19838

Microbiology — Cosmetics – Guidelines for the application of ISO standards on Cosmetic Microbiology

TC 260 Human resource management

ISO/DTR 30406

Management by sustainable employability of staff

TC 265 Carbon dioxide capture, transportation, and geological storage

ISO/DTR 27912

Carbon dioxide capture — Carbon dioxide capture systems, technologies and processes

JTC 1 Information technology

ISO/IEC CD 20246

Software and Systems Engineering — Work Product Reviews

ISO/IEC PDTR 19566-1

Information technologies — JPEG Systems — Part 1: File format and file structure

ISO/IEC CD 24751-1

Information technology — Individualized adapt-ability and accessibility in e-learning, education and training — Part 1: Framework and refer-ence model

ISO/IEC CD 19794-15

Information technology — Biometric data interchange format — Part 15: Palm crease image data

ISO/IEC CD 29794-4

Information technology — Biometric sample quality — Part 4: Finger image data

ISO/IEC CD 30107-2

Information Technology — Biometric presenta-tion attack detection — Part 2: Data formats

ISO/IEC CD 30134-4

Information Technology — Data Centres — Key performance indicators — Part 4: IT Equipment Energy Efficiency for Servers (ITEE)

ISO/IEC PDTR 20000-10

Information technology — Service manage-ment — Part 10: Concepts and terminology

ISO/IEC PDTR 38504

Information technology — Governance of IT — The structure of principles-based standards in the governance of information technology

DIS circulated


These documents have obtained substantial support within the ap-propriate ISO technical committee.

They have been submitted to the ISO member bodies for voting by the date shown.

* Available in English only

Vote terminates


ISO/DIS 3245.3

* Rolling bearings — Needle roller bearings with drawn cup and without inner ring — Boundary dimensions, geometrical product specifications (GPS) and toler-ance values

2015-05-20

(Revision of ISO 3245:2007)

TC 8 Ships and marine technology

ISO/DIS 484-2 * Shipbuilding — Ship screw propellers — Manufacturing tolerances — Part 2: Propellers of diameter between 0,80 and 2,50 m inclusive

2015-07-01

(Revision of ISO 484-2:1981)


ISO/DIS 17905.2

Ships and marine technology - Installation, inspection and maintenance of container secur-ing devices for ships

2015-05-10

TC 10 Technical product documentation

ISO/DIS 15787.2

* Technical product documenta-tion — Heat-treated ferrous parts — Presentation and indications

2015-06-19


TC 20 Aircraft and space vehicles

ISO/DIS 12208 * Space systems — Space envi-ronment (natural and artificial) — Observed proton fluences over long duration at GEO and guideline for selection of confi-dence level in statistical model of solar proton fluences

2015-06-20

(Revision of ISO/TS 12208:2011)

TC 22 Road vehicles

ISO/DIS 11898-1

* Road vehicles — Controller area network (CAN) — Part 1: Data link layer and physical signalling

2015-06-27

(Revision of ISO 11898-1:2003, ISO 11898-1:2003/Cor 1:2006)

ISO/DIS 15765-2

* Road vehicles — Diagnostic communication over Controller Area Network (DoCAN) — Part 2: Transport protocol and network layer services

2015-06-20


ISO/DIS 15765-4

* Road vehicles — Diagnostic communication over Controller Area Network (DoCAN) — Part 4: Requirements for emissions-related systems

2015-06-20

(Revision of ISO 15765-4:2011, ISO 15765-4:2011/Amd 1:2013)

ISO/DIS 22901-3

* Road vehicles — Open diagnos-tic data exchange (ODX) — Part 3: Fault symptom exchange description (FXD)

2015-06-20

TC 24 Particle characterization including sieving

ISO/DIS 19430 * Determination of particle size distribution — Particle tracking analysis

2015-06-24

TC 38 Textiles

ISO/DIS 18264 * Textile slings — Lifting slings for general purpose lifting opera-tions made from fibre ropes — High Modulus PolyEthylene (HMPE)

2015-06-20

TC 43 Acoustics

ISO/DIS 9296.2

Acoustics — Declared noise emission values of information technology and telecommunica-tions equipment

2015-05-24



ISO/DIS 17672 * Brazing — Filler metals

2015-06-20


ISO/DIS 3581 * Welding consumables — Cov-ered electrodes for manual metal arc welding of stain-less and heat-resisting steels — Classification

2015-06-20

(Revision of ISO 3581:2003, ISO 3581:2003/Cor 1:2008, ISO 3581:2003/Amd 1:2011)

ISO/DIS 17637 * Non-destructive testing of welds — Visual testing of fusion-weld-ed joints

2015-06-20


ISO/DIS 17638 * Non-destructive testing of welds — Magnetic particle testing

2015-06-20


ISO/DIS 10656 * Resistance welding equipment — Transformers — Integrated transformers for welding guns

2015-06-24

(Revision of ISO 10656:1996, ISO 10656:1996/Cor 1:2000)


ISO/DIS 6802 * Rubber and plastics hoses and hose assemblies with wire rein-forcements — Hydraulic impulse test with flexing

2015-06-20


ISO/DIS 7233 * Rubber and plastics hoses and hose assemblies — Determina-tion of resistance to vacuum

2015-06-20


ISO/DIS 7326 * Rubber and plastics hoses — Assessment of ozone resistance under static conditions

2015-06-27


ISO/DIS 8331 * Rubber and plastics hoses and hose assemblies — Guidelines for selection, storage, use and maintenance

2015-06-20


ISO/DIS 1304 * Rubber compounding ingredi-ents — Carbon black — Deter-mination of iodine adsorption number

2015-06-24


ISO/DIS 2286-2

* Rubber- or plastics-coated fab-rics — Determination of roll char-acteristics — Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate

2015-06-20


ISO/DIS 2286-3

* Rubber- or plastics-coated fabrics — Determination of roll characteristics — Part 3: Method for determination of thickness

2015-06-20


TC 61 Plastics

ISO/DIS 4586-1

* High-pressure decorative laminates (HPL, HPDL) — Sheets based on thermosetting resins (Usually called Laminates) — Part 1: Introduction and general information

2015-06-03



ISO/DIS 4586-2

* High-pressure decorative laminates (HPL, HPDL) — Sheets based on thermosetting resins (Usually called Laminates) — Part 2: Determination of properties

2015-06-03


ISO/DIS 4586-3

* High-pressure decorative laminates (HPL, HPDL) — Sheets based on thermosetting resins (Usually called Laminates) — Part 3: Classification and specifi-cations for laminates less than 2 mm thick and intended for bond-ing to supporting substrates

2015-06-03


ISO/DIS 4586-4

* High-pressure decorative laminates (HPL, HPDL) — Sheets based on thermosetting resins (Usually called Laminates) — Part 4: Classification and specifi-cations for compact laminates of thickness 2 mm and greater

2015-06-03


ISO/DIS 4586-5

* High-pressure decorative laminates (HPL, HPDL) — Sheets based on thermosetting resins (Usually called Laminates) — Part 5: Classification and specifications for flooring grade laminates less than 2 mm thick intended for bonding to support-ing substrates

2015-06-03


ISO/DIS 4586-6

* High-pressure decorative laminates (HPL, HPDL) — Sheets based on thermosetting resins (Usually called Laminates) — Part 6: Classification and specifications for exterior-grade compact laminates of thickness 2 mm and greater

2015-06-03


ISO/DIS 4586-7

* High-pressure decorative laminates (HPL, HPDL) — Sheets based on thermosetting resins (Usually called Laminates) — Part 7: Classification and specifi-cations for design laminates

2015-06-03


ISO/DIS 4586-8

* High-pressure decorative laminates (HPL, HPDL) — Sheets based on thermosetting resins (Usually called Laminates) — Part 8: Classification and specifications for alternative core laminates

2015-06-03


TC 67 Materials, equipment and offshore structures for pe-troleum, petrochemical and natural gas industries

ISO/DIS 16530-1

* Petroleum and natural gas indus-tries — Well integrity — Part 1: Life cycle governance

2015-06-20

TC 68 Financial services

ISO/DIS 9564-4.2

* Financial services — Personal Identification Number (PIN) man-agement and security — Part 4: Requirements for PIN handling in eCommerce for Payment Transactions

2015-05-13

(Revision of ISO/TR 9564-4:2004)

TC 107 Metallic and other inorgan-ic coatings

ISO/DIS 18535 * Diamond-like carbon films — Determination of friction and wear characteristics of diamond-like carbon films by ball-on-disc method

2015-06-20

ISO/DIS 19477 * Metallic and other inorganic coatings — Measurement of Young's modulus of thermal bar-rier coatings by beam bending

2015-06-24

TC 110 Industrial trucks

ISO/DIS 10896-2

* Rough-terrain trucks — Safety requirements and verification — Part 2: Slewing trucks

2015-06-27

TC 114 Horology

ISO/DIS 19235 * Analogue quartz clocks — Tim-ing Accuracy

2015-06-24

TC 138 Plastics pipes, fittings and valves for the transport of fluids

ISO/DIS 16486-4

* Plastics piping systems for the supply of gaseous fuels — Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 4: Valves

2015-06-29

TC 145 Graphical symbols

ISO/DIS 28564-2

* Public information guidance sys-tems — Part 2: Design principles and requirements for location signs and direction signs

2015-06-27

TC 146 Air quality

ISO/DIS 12219-6

* Interior air of road vehicles — Part 6: Method for the deter-mination of the emissions of semi-volatile organic compounds from vehicle interior parts and materials at higher temperature — Small chamber method

2015-06-27


ISO/DIS 5832-1

* Implants for surgery — Metal-lic materials — Part 1: Wrought stainless steel

2015-06-24


ISO/DIS 5832-3

* Implants for surgery — Metal-lic materials — Part 3: Wrought titanium 6-aluminium 4-vana-dium alloy

2015-07-03


TC 193 Natural gas

ISO/DIS 6976 * Natural gas — Calculation of calorific values, density, relative density and Wobbe indices from composition

2015-06-20

(Revision of ISO 6976:1995, ISO 6976:1995/Cor 1:1997, ISO 6976:1995/Cor 2:1997, ISO 6976:1995/Cor 3:1999)

TC 201 Surface chemical analysis


ISO/DIS 18516 * Surface chemical analysis — De-termination of lateral resolution and sharpness in beam based methods

2015-06-03


TC 211 Geographic information/Geomatics

ISO/DIS 19119 * Geographic information — Services

2015-06-20

(Revision of ISO 19119:2005, ISO 19119:2005/Amd 1:2008)

TC 226 Materials for the produc-tion of primary aluminium

ISO/DIS 19950 * Aluminium oxide primarily used for the production of aluminium — Determination of alpha alumina content — Method using X-ray diffraction net peak areas

2015-06-03

TC 249 Traditional chinese medicine

ISO/DIS 18668-1

* Coding System of Chinese Medi-cines — Part 1: Coding Rules for Chinese Medicines

2015-06-20


ISO/IEC DIS 8824-1

* Information technology — Ab-stract Syntax Notation One (ASN.1): Specification of basic notation — Part 1:

2015-06-24

(Revision of ISO/IEC 8824-1:2008, ISO/IEC 8824-1:2008/Cor 1:2012, ISO/IEC 8824-1:2008/Cor 2:2014)

ISO/IEC DIS 8824-2

* Information technology — Ab-stract Syntax Notation One (ASN.1): Information object specification — Part 2:

2015-06-24

(Revision of ISO/IEC 8824-2:2008, ISO/IEC 8824-2:2008/Cor 1:2012)

ISO/IEC DIS 8824-3

* Information technology — Ab-stract Syntax Notation One (ASN.1): Constraint specification — Part 3:

2015-06-24


ISO/IEC DIS 8824-4

* Information technology — Ab-stract Syntax Notation One (ASN.1): Parameterization of ASN.1 specifications — Part 4:

2015-06-24


ISO/IEC DIS 8825-1

* Information technology — ASN.1 encoding rules: Specification of Basic Encoding Rules (BER), Canonical Encoding Rules (CER) and Distinguished Encoding Rules (DER) — Part 1:

2015-06-24


ISO/IEC DIS 8825-2

* Information technology — ASN.1 encoding rules: Specification of Packed Encoding Rules (PER) — Part 2:

2015-06-24


ISO/IEC DIS 8825-3

* Information technology — ASN.1 encoding rules: Specification of Encoding Control Notation (ECN) — Part 3:

2015-06-24


ISO/IEC DIS 8825-4

* Information technology — ASN.1 encoding rules: XML Encoding Rules (XER) — Part 4:

2015-06-24


ISO/IEC DIS 8825-5

* Information technology — ASN.1 encoding rules: Mapping W3C XML schema definitions into ASN.1 — Part 5:

2015-06-24


ISO/IEC/IEEE DIS 24748-4.2

* Systems and software engineer-ing — Life cycle management — Part 4: Systems engineering planning

2015-05-14

(Revision of ISO/IEC 26702:2007)

ISO/IEC DIS 17760-102

* Information technology — AT At-tachment — Part 102: ATA/ATAPI Command set - 2 (ACS-2)

2015-06-24

ISO/IEC DIS 27000

* Information technology — Se-curity techniques — Information security management systems — Overview and vocabulary

2015-06-20


ISO/IEC 14496-10:2014/DAmd 1

* Information technology — Cod-ing of audio-visual objects — Part 10: Advanced Video Coding — Amendment 1: Multi-Resolu-tion frame compatible stereo-scopic video with depth maps

2015-06-20

ISO/IEC 23001-8:2013/DAmd 2

* Information technology — MPEG systems technologies — Part 8: Coding-independent code points — Amendment 2: Sample aspect ratio and additional transfer functions, colour primaries and matrix coefficients

2015-06-20

FDIS circulated


These Final draft International Standards have been submitted to the ISO member bodies for formal approval by the date shown



Vote terminates


ISO/FDIS 16682

* Aerospace series — Terminology for clamping devices

2015-05-07

TC 34 Food products

ISO/FDIS 11085

* Cereals, cereals-based products and animal feeding stuffs — Determination of crude fat and total fat content by the Randall extraction method

2015-05-13


ISO/FDIS 21415-2

* Wheat and wheat flour — Gluten content — Part 2: Determination of wet gluten and gluten index by mechanical means

2015-05-13


ISO/FDIS 16140-1

* Microbiology of the food chain — Method validation — Part 1: Vocabulary

2015-05-20


ISO/FDIS 16140-2

* Microbiology of the food chain — Method validation — Part 2: Protocol for the validation of alternative (proprietary) methods against a reference method

2015-05-20


ISO/FDIS 17468

* Microbiology of the food chain — Technical requirements and guidance on establishment or revision of standard methods

2015-05-20

TC 39 Machine tools

ISO/FDIS 18217

* Safety of woodworking machines — Edge-banding machines fed by chain(s)

2015-05-27

TC 41 Pulleys and belts (including veebelts)

ISO/FDIS 9563 * Belt drives — Electrical con-ductivity of antistatic endless synchronous belts — Character-istics and test method

2015-05-31



ISO/FDIS 17643

* Non-destructive testing of welds — Eddy current testing of welds by complex-plane analysis

2015-05-20



ISO/FDIS 1125 * Rubber compounding ingredi-ents — Carbon black — Deter-mination of ash

2015-05-20


ISO/FDIS 1658 * Natural rubber (NR) — Evaluation procedure

2015-05-20


TC 58 Gas cylinders

ISO/FDIS 17871

* Gas cylinders — Quick release cylinder valves — Specification and type testing

2015-05-27

TC 61 Plastics

ISO/FDIS 22007-2

* Plastics — Determination of thermal conductivity and thermal diffusivity — Part 2: Transient plane heat source (hot disc) method

2015-05-20


TC 67 Materials, equipment and offshore structures for pe-troleum, petrochemical and natural gas industries

ISO/FDIS 24817

* Petroleum, petrochemical and natural gas industries — Com-posite repairs for pipework — Qualification and design, installa-tion, testing and inspection

2015-05-06

(Revision of ISO/TS 24817:2006)

TC 70 Internal combustion engines

ISO/FDIS 8178-7

* Reciprocating internal combus-tion engines — Exhaust emission measurement — Part 7: Engine family determination

2015-05-17


ISO/FDIS 8178-8

* Reciprocating internal combus-tion engines — Exhaust emission measurement — Part 8: Engine group determination

2015-05-31


TC 87 Cork

ISO/FDIS 2385 * Packed cork — Virgin cork, raw reproduction cork, ramassage, cleanings, cleanings, burnt cork, boiled reproduction cork and raw corkwaste — Sampling to determine moisture content

2015-05-17


ISO/FDIS 2386 * Packed cork — Virgin cork, raw reproduction cork, ramassage, cleanings, burnt cork, boiled reproduction cork and raw corkwaste — Determination of moisture content

2015-05-17


TC 102 Iron ore and direct reduced iron

ISO/FDIS 4689-2

* Iron ores — Determination of sul-fur content — Part 2: Combus-tion/titration method

2015-05-07


ISO/FDIS 4689-3

* Iron ores — Determination of sul-fur content — Part 3: Combus-tion/infrared method

2015-05-07


ISO/FDIS 10203

* Iron ores — Determination of cal-cium — Flame atomic absorp-tion spectrometric method

2015-05-07


ISO/FDIS 10204

* Iron ores — Determination of magnesium — Flame atomic ab-sorption spectrometric method

2015-05-07



ISO/FDIS 11536

* Iron ores — Determination of loss on ignition — Gravimetric method

2015-05-28

ISO/FDIS 15633

* Iron ores — Determination of nickel — Flame atomic absorp-tion spectrometric method

2015-05-07


ISO/FDIS 15634

* Iron ores — Determination of chromium content — Flame atomic absorption spectrometric method

2015-05-07


TC 106 Dentistry

ISO/FDIS 4823 * Dentistry — Elastomeric impres-sion materials

2015-05-20

(Revision of ISO 4823:2000, ISO 4823:2000/Cor 1:2004, ISO 4823:2000/Amd 1:2007)

TC 110 Industrial trucks

ISO/FDIS 11525-5.2

* Rough-terrain trucks — User requirements — Part 5: Interface between rough-terrain truck and integrated personnel work platform

2015-05-07

TC 118 Compressors and pneu-matic tools, machines and equipment

ISO 28927-5:2009/FDAmd 1

* Hand-held portable power tools — Test methods for evaluation of vibration emission — Part 5: Drills and impact drills — Amendment 1

2015-05-06

ISO 28927-8:2009/FDAmd 1

* Hand-held portable power tools — Test methods for evaluation of vibration emission — Part 8: Saws, polishing and filing ma-chines with reciprocating action and small saws with oscillating or rotating action — Amendment 1: Polishing machines, modified feed forces

2015-05-06


ISO/FDIS 23747

* Anaesthetic and respiratory equipment — Peak expiratory flow meters for the assessment of pulmonary function in sponta-neously breathing humans

2015-05-13


IEC/FDIS 80601-2-71

Medical electrical equipment — Part 2-71: Particular require-ments for the basic safety and essential performance of func-tional Near-Infrared Spectros-copy (NIRS) equipment

2015-05-23


ISO/FDIS 10771-1

* Hydraulic fluid power — Fa-tigue pressure testing of metal pressure-containing envelopes — Part 1: Test method

2015-05-19



ISO/FDIS 15494

* Plastics piping systems for industrial applications — Po-lybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PERT), crosslinked polyethylene (PE-X), polypropylene (PP) — Metric series for specifications for com-ponents and the system

2015-05-13



ISO/FDIS 12891-1

* Retrieval and analysis of surgical implants — Part 1: Retrieval and handling

2015-05-28


TC 157 Non-systemic contra-ceptives and STI barrier prophylactics

ISO/FDIS 4074 * Natural rubber latex male con-doms — Requirements and test methods

2015-06-13


TC 158 Analysis of gases

ISO/FDIS 6142-1

* Gas analysis — Preparation of calibration gas mixtures — Part 1: Gravimetric method for Class I mixtures

2015-05-19


TC 163 Thermal performance and energy use in the built environment

ISO/FDIS 9972 * Thermal performance of build-ings — Determination of air permeability of buildings — Fan pressurization method

2015-05-20


TC 172 Optics and photonics

ISO/FDIS 10110-5

* Optics and photonics — Prepa-ration of drawings for optical elements and systems — Part 5: Surface form tolerances

2015-05-17


ISO/FDIS 10110-6.2

* Optics and photonics — Prepa-ration of drawings for optical elements and systems — Part 6: Centring tolerances

2015-05-17


ISO/FDIS 10110-19

* Optics and photonics — Prepa-ration of drawings for optical ele-ments and systems — Part 19: General description of surfaces and components

2015-05-17

ISO/FDIS 14999-4

* Optics and photonics — Interfer-ometric measurement of optical elements and optical systems — Part 4: Interpretation and evalu-ation of tolerances specified in ISO 10110

2015-05-17


ISO 8624:2011/FDAmd 1

* Ophthalmic optics — Spectacle frames — Measuring system and terminology — Amendment 1

2015-05-20

TC 188 Small craft


ISO/FDIS 19009

* Small craft — Electric navigation lights — Performance of LED lights

2015-05-13

TC 190 Soil quality

ISO/FDIS 16558-1

* Soil quality — Risk-based petroleum hydrocarbons — Part 1: Determination of aliphatic and aromatic fractions of volatile petroleum hydrocarbons using gas chromatography (static headspace method)

2015-05-13

TC 199 Safety of machinery

ISO 13849-1:2006/FDAmd 1

* Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design — Amendment 1

2015-05-20


ISO/FDIS 11067

* Intelligent transport systems — Curve speed warning systems (CSWS) — Performance require-ments and test procedures

2015-05-07

TC 210 Quality management and corresponding general as-pects for medical devices

IEC 62304:2006/FDAmd 1

Medical device software — Software life cycle processes — Amendment 1

2015-05-23

TC 234 Fisheries and aquaculture

ISO/FDIS 16488

* Marine finfish farms — Open net cage — Design and operation

2015-05-19

ISO/FDIS 16541

* Methods for sea lice surveillance on marine finfish farms

2015-05-19

ISO/FDIS 18538

* Traceability of molluscan prod-ucts — Specifications on the information to be recorded in farmed molluscan distribution chains

2015-05-19

TC 254 Safety of amusement rides and amusement devices

ISO/FDIS 17842-1

* Safety of amusement rides and amusement devices — Part 1: Design and manufacture

2015-05-17

TC 257 Evaluation of energy savings

ISO/FDIS 17742.2

* Energy efficiency and savings calculation for countries, regions and cities

2015-05-03

TC 282 Water re-use

ISO/FDIS 16075-1

* Guidelines for treated waste-water use for irrigation projects — Part 1: The basis of a reuse project for irrigation

2015-05-10

(Revision of ISO/CD 16075-2)

ISO/FDIS 16075-2

* Guidelines for treated waste-water use for irrigation projects — Part 2: Development of the project

2015-05-10

ISO/FDIS 16075-3

* Guidelines for treated wastewa-ter use for irrigation projects — Part 3: Components of a reuse project for irrigation

2015-05-10

CASCO Committee on conformity assessment

ISO/IEC FDIS 17021-1

* Conformity assessment — Re-quirements for bodies provid-ing audit and certification of management systems — Part 1: Requirements

2015-05-06



ISO/IEC FDIS 29157

* Information technology — Tel-ecommunications and informa-tion exchange between systems — PHY/MAC specifications for short-range wireless low-rate ap-plications in the ISM band

2015-05-07



* Information technology — IT asset management — Overview and vocabulary — Part 5:

2015-05-07

(Revision of ISO/IEC 19770-5:2013)

ISO/IEC 15693-3:2009/FDAmd 2

* Identification cards — Contact-less integrated circuit cards — Vicinity cards — Part 3: Anticol-lision and transmission protocol — Amendment 2: Clarification of use of Data Elements

2015-05-25

ISO/IEC 15693-3:2009/FDAmd 3

* Identification cards — Contact-less integrated circuit cards — Vicinity cards — Part 3: Anticol-lision and transmission protocol — Amendment 3: Extended VICC memory organisation

2015-05-07

ISO/IEC FDIS 14543-4-3

Information technology — Home Electronic Systems (HES) archi-tecture — Part 4-3: Application layer interface to lower com-munications layers for network enhanced control devices of HES Class 1

2015-05-28

ISO/IEC FDIS 27041

* Information technology — Secu-rity techniques — Guidance on assuring suitability and ad-equacy of incident investigative method

2015-05-07

ISO/IEC FDIS 27042

* Information technology — Secu-rity techniques — Guidelines for the analysis and interpretation of digital evidence

2015-05-07

ISO/IEC 13818-1/FDAmd 2

* Information technology — Ge-neric coding of moving pic-tures and associated audio information — Part 1: Systems — Amendment 2: Delivery of timeline for external data

2015-05-17

ISO/IEC 23001-8:2013/FDAmd 1

* Information technology — MPEG systems technologies — Part 8: Coding-independent code points — Amendment 1: New audio code points

2015-05-19


* Information technology — MPEG systems technologies — Part 11: Energy-efficient media consump-tion (green metadata)

2015-05-14


ISO/IEC 23009-1:2014/FDAmd 2

Information technology — Dy-namic adaptive streaming over HTTP (DASH) — Part 1: Media presentation description and segment formats — Amendment 2: Spatial relationship descrip-tion, generalized URL param-eters and other extensions

2015-05-19


* Information technology — Busi-ness Operational View — Part 2: Registration of scenarios and their components as business objects

2015-05-17

(Revision of ISO/IEC 15944-2:2006)


* Information technology — Busi-ness Operational View — Part 9: Business transaction traceabil-ity framework for commitment exchange

2015-05-17


* Information technology — Meta-model framework for interoper-ability (MFI) — Part 5: Metamodel for process model registration

2015-05-20

ISO/IEC 19794-2:2011/FDAmd 2

Information technology — Bio-metric data interchange formats — Part 2: Finger minutiae data — Amendment 2: XML encoding and clarification of defects

2015-05-19

ISO/IEC 19794-4:2011/FDAmd 2

Information technology — Bio-metric data interchange formats — Part 4: Finger image data — Amendment 2: XML encoding and clarification of defects

2015-05-27

ISO/IEC 19794-7:2014/FDAmd 1

* Information technology — Bio-metric data interchange formats — Part 7: Signature/sign time series data — Amendment 1: XML encoding

2015-05-27

ISO/IEC 19794-9:2011/FDAmd 2

Information technology — Bio-metric data interchange formats — Part 9: Vascular image data — Amendment 2: XML Encoding and clarification of defercts

2015-05-27

Standards published

New International Standards published between 01 March and 31 March 2015


** French version of standard previously published in English only

Price

group

IIW International Institute of Welding

ISO 14373:2015

Resistance welding — Procedure for spot welding of uncoated and coated low carbon steels

C


ISO 28007-1:2015

* Ships and marine technology — Guide-lines for Private Maritime Security Companies (PMSC) providing privately contracted armed security person-nel (PCASP) on board ships (and pro forma contract) — Part 1: General

D

ISO 9876:2015 * Ships and marine technology — Ma-rine facsimile receivers for meteorologi-cal charts

B

ISO 15016:2015

* Ships and marine technology — Guide-lines for the assessment of speed and power performance by analysis of speed trial data

H

ISO 22554:2015

* Ships and marine technology — Pro-peller shaft revolution indicators — Electric type and electronic type

B

ISO 17941:2015

* Ships and marine technology — Hy-draulic hinged watertight fireproof doors

B

TC 17 Steel

ISO 16573:2015

* Steel — Measurement method for the evaluation of hydrogen embrittlement resistance of high strength steels

B

ISO 16124:2015

Steel wire rod — Dimensions and tolerances

B


ISO 16694:2015

* Space systems — The measured pa-rameters at firing bench and flight tests of liquid rocket engines

C

TC 22 Road vehicles

ISO 8820-5:2015

* Road vehicles — Fuse-links — Part 5: Fuse-links with axial terminals (Strip fuse-links) Types SF 30 and SF 51 and test fixtures

C

ISO 8820-10:2015

* Road vehicles — Fuse-links — Part 10: Fuse-links with tabs Type L (high cur-rent miniature)

B

ISO 6621-4:2015

* Internal combustion engines — Piston rings — Part 4: General specifications

E

ISO/TR 14645:2015

* Road vehicles — Test procedures for evaluating child restraint system inter-actions with deploying air bags

C

ISO 12617:2015

* Road vehicles — Liquefied natural gas (LNG) refuelling connector — 3,1 MPa connector

C

TC 23 Tractors and machinery for agri-culture and forestry

ISO 16122-1:2015

Agricultural and forestry machinery — Inspection of sprayers in use — Part 1: General

B

ISO 16122-2:2015

Agricultural and forestry machinery — Inspection of sprayers in use — Part 2: Horizontal boom sprayers

C


ISO 16122-3:2015

Agricultural and forestry machinery — Inspection of sprayers in use — Part 3: Sprayers for bush and tree crops

C

ISO 16122-4:2015

Agricultural and forestry machines — Inspection of sprayers in use — Part 4: Fixed and semi-mobile sprayers

D

ISO 24253-1:2015

Crop protection equipment — Spray deposition test for field crop — Part 1: Measurement in a horizontal plane

D

ISO 24253-2:2015

Crop protection equipment — Spray deposition test for field crop — Part 2: Measurement in a crop

D

TC 29 Small tools

ISO 1711-1:2015

Assembly tools for screws and nuts — Technical specifications — Part 1: Hand-operated wrenches and sockets

A

ISO 1711-2:2015

Assembly tools for screws and nuts — Technical specifications — Part 2: Machine-operated sockets (impact)

A

ISO 2725-1:2015

* Assembly tools for screws and nuts — Square drive sockets — Part 1: Hand-operated sockets

B

ISO 2725-2:2015

* Assembly tools for screws and nuts — Square drive sockets — Part 2: Machine-operated sockets ("impact")

B

ISO 2725-3:2015

* Assembly tools for screws and nuts — Square drive sockets — Part 3: Ma-chine-operated sockets ("non-impact")

A

TC 34 Food products

ISO 11056:1999/Amd 2:2015

Sensory analysis — Methodology — Magnitude estimation method — Amendment 2

XZ

ISO 29842:2011/Amd 1:2015

* Sensory analysis — Methodology — Balanced incomplete block designs — Amendment 1

XZ

ISO/TS 21569-3:2015

Horizontal methods for molecular bio-marker analysis — Methods of analysis for the detection of genetically modi-fied organisms and derived products — Part 3: Construct-specific real-time PCR method for detection of P35S-pat-sequence for screening genetically modified organisms

B

TC 37 Terminology and other language and content resources

ISO/TS 24620-1:2015

* Language resource management — Controlled natural language (CNL) — Part 1: Basic concepts and principles

B

TC 38 Textiles

ISO/TR 11827:2012

Textiles — Composition testing — Identification of fibres

G

ISO 18103:2015

Superfine woven wool fabric label-ling — Requirements for Super S code definition

B

ISO 1136:2015 * Wool — Determination of mean diameter of fibres — Air permeability method

C

TC 39 Machine tools

ISO 1985:2015 Machine tools — Test conditions for surface grinding machines with vertical grinding wheel spindle and reciprocat-ing table — Testing of the accuracy

D

ISO/TR 16907:2015

* Machine tools — Numerical compen-sation of geometric errors

E

TC 42 Photography

ISO 15781:2015

* Photography — Digital still cameras — Measuring shooting time lag, shutter release time lag, shooting rate, and start-up time

D


ISO 23277:2015

Non-destructive testing of welds — Penetrant testing — Acceptance levels

A


ISO 6505:2015 * Rubber, vulcanized or thermoplastic — Determination of tendency to adhere to and corrode metals

B

TC 58 Gas cylinders

ISO 21172-1:2015

* Gas cylinders — Welded steel pressure drums up to 3 000 litres capacity for the transport of gases — Design and construction — Part 1: Capacities up to 1 000 litres

F

TC 59 Buildings and civil engineering works

ISO 16757-1:2015

* Data structures for electronic product catalogues for building services — Part 1: Concepts, architecture and model

E

ISO/TS 21929-2:2015

* Sustainability in building construc-tion — Sustainability indicators — Part 2: Framework for the development of indicators for civil engineering works

E

TC 61 Plastics

ISO 899-1:2003/Amd 1:2015

Plastics — Determination of creep behaviour — Part 1: Tensile creep — Amendment 1

XZ

ISO 899-2:2003/Amd 1:2015

Plastics — Determination of creep behaviour — Part 2: Flexural creep by three-point loading — Amendment 1

XZ

ISO 16012:2015

* Plastics — Determination of linear dimensions of test specimens

B

ISO 23560:2015

* Woven polypropylene sacks for bulk packaging of foodstuffs

B

TC 67 Materials, equipment and off-shore structures for petroleum, petrochemical and natural gas industries

ISO/TS 16901:2015

* Guidance on performing risk assess-ment in the design of onshore LNG installations including the ship/shore interface

G


ISO 15589-1:2015

* Petroleum, petrochemical and natural gas industries — Cathodic protection of pipeline systems — Part 1: On-land pipelines

G

TC 68 Financial services

ISO 9564-1:2011/Amd 1:2015

* Financial services — Personal Identifi-cation Number (PIN) management and security — Part 1: Basic principles and requirements for PINs in card-based systems — Amendment 1

XZ

TC 72 Textile machinery and accessories

ISO 23771:2015

Textile machinery — Guide to the de-sign of textile machinery for reduction of the noise emissions

E

TC 85 Nuclear energy, nuclear tech-nologies, and radiological protection

ISO/ASTM 51608:2015

* Practice for dosimetry in an X-ray (bremsstrahlung) facility for radiation processing at energies between 50 keV and 7.5 MeV

C

ISO/ASTM 51649:2015

* Practice for dosimetry in an electron beam facility for radiation processing at energies between 300 keV and 25 MeV

E

ISO/ASTM 51707:2015

* Guide for estimation of measurement uncertainty in dosimetry for radiation processing

B

ISO 12799:2015

Nuclear energy — Determination of nitrogen content in UO2, (U,Gd)O2 and (U,Pu)O2 sintered pellets — Inert gas extraction and conductivity detection method

A

TC 92 Fire safety

ISO 5660-1:2015

Reaction-to-fire tests — Heat release, smoke production and mass loss rate — Part 1: Heat release rate (cone calo-rimeter method) and smoke production rate (dynamic measurement)

G

ISO 16405:2015

* Room corner and open calorimeter — Guidance on sampling and measure-ment of effluent gas production using FTIR technique

C

TC 98 Bases for design of structures

ISO 2394:2015 * General principles on reliability for structures

H

TC 106 Dentistry

ISO 7494-2:2015

Dentistry — Dental units — Part 2: Air, water, suction and wastewater systems

D

TC 108 Mechanical vibration, shock and condition monitoring

ISO 10816-6:1995/Amd 1:2015

* Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 6: Recipro-cating machines with power ratings above 100 kW — Amendment 1

XZ


ISO 5356-1:2015

Anaesthetic and respiratory equipment — Conical connectors — Part 1: Cones and sockets

C

ISO 80601-2-13:2011/Amd 1:2015

* Medical electrical equipment — Part 2-13: Particular requirements for basic safety and essential performance of an anaesthetic workstation — Amend-ment 1

XZ

TC 122 Packaging

ISO 17480:2015

* Packaging — Accessible design — Ease of opening

F


ISO 6953-1:2015

Pneumatic fluid power — Compressed air pressure regulators and filter-regu-lators — Part 1: Main characteristics to be included in literature from suppliers and product-marking requirements

B

ISO 6953-2:2015

Pneumatic fluid power — Compressed air pressure regulators and filter-regulators — Part 2: Test methods to determine the main characteristics to be included in literature from suppliers

E

ISO 18413:2015

Hydraulic fluid power — Cleanliness of components — Inspection document and principles related to contaminant extraction and analysis, and data reporting

F

ISO 3601-5:2015

* Fluid power systems — O-rings — Part 5: Specification of elastomeric materi-als for industrial applications

C

TC 137 Footwear sizing designations and marking systems

ISO/TS 19408:2015

Footwear — Sizing — Vocabulary and terminology

D


ISO 4427-1:2007/Amd 1:2015

* Plastics piping systems — Polyethyl-ene (PE) pipes and fittings for water supply — Part 1: General — Amend-ment 1: Melt mass-flow rate (MFR) for PE 80 and PE 100

XZ

ISO 3458:2015 Plastics piping systems — Mechanical joints between fittings and pressure pipes — Test method for leaktightness under internal pressure

A

ISO 3501:2015 Plastics piping systems — Mechanical joints between fittings and pressure pipes — Test method for resistance to pull-out under constant longitudinal force

A

ISO 6259-1:2015

Thermoplastics pipes — Determination of tensile properties — Part 1: General test method

B

ISO 13951:2015

Plastics piping systems — Test method for the resistance of plastic pipe/pipe or pipe/fitting assemblies to tensile loading

A

ISO 17778:2015

Plastics piping systems — Fittings, valves and ancillaries — Determination of gaseous flow rate/pressure drop relationships

A

ISO 7509:2015 * Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes — Determination of time to fail-ure under sustained internal pressure

B


ISO 18851:2015

* Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Test method to prove the structural design of fittings

B

ISO 4437-4:2015

* Plastics piping systems for the supply of gaseous fuels — Polyethylene (PE) — Part 4: Valves

C

TC 145 Graphical symbols

ISO 7001:2007/Amd 2:2015

* Graphical symbols — Public informa-tion symbols — Amendment 2

XZ

TC 146 Air quality

ISO 19289:2015

* Air quality — Meteorology — Siting classifications for surface observing stations on land

C


ISO 17690:2015

* Water quality — Determination of available free cyanide (pH 6) using flow injection analysis (FIA), gas-diffusion and amperometric detection

B

TC 172 Optics and photonics

ISO 9022-12:2015

* Optics and photonics — Environ-mental test methods — Part 12: Contamination

B

ISO 9022-14:2015

* Optics and photonics — Environmental test methods — Part 14: Dew, hoar-frost, ice

A

ISO 9022-17:2015

* Optics and photonics — Environmental test methods — Part 17: Combined contamination, solar radiation

A

ISO 14132-4:2015

* Optics and photonics — Vocabulary for telescopic systems — Part 4: Terms for astronomical telescopes

A

TC 173 Assistive products for persons with disability

IEC 60601-2-52:2009/Amd 1:2015

* Medical electrical equipment — Part 2-52: Particular requirements for the basic safety and essential performance of medical beds — Amendment 1

XZ

ISO/TS 16840-12:2015

* Wheelchair seating — Part 12: Appara-tus and method for cushion envelop-ment testing

C

TC 174 Jewellery

ISO 15093:2015

Jewellery — Determination of precious metals in 999 0/00 gold, platinum and palladium jewellery alloys — Difference method using ICP-OES

B

TC 178 Lifts, escalators and moving walks

ISO 25745-2:2015

Energy performance of lifts, escalators and moving walks — Part 2: Energy calculation and classification for lifts (elevators)

C

ISO 25745-3:2015

Energy performance of lifts, escalators and moving walks — Part 3: Energy calculation and classification of escala-tors and moving walks

C


ISO 15746-1:2015

* Automation systems and integration — Integration of advanced process control and optimization capabilities for manufacturing systems — Part 1: Framework and functional model

D

IEC 62264-2:2015

* Enterprise-control system integration — Part 2: Objects and attributes for enterprise-control system integration

H

TC 194 Biological and clinical evaluation of medical devices

ISO/TR 10993-33:2015

* Biological evaluation of medical de-vices — Part 33: Guidance on tests to evaluate genotoxicity — Supplement to ISO 10993-3

F

TC 201 Surface chemical analysis

ISO 14707:2015

* Surface chemical analysis — Glow dis-charge optical emission spectrometry (GD-OES) — Introduction to use

B


ISO/TS 21219-3:2015

* Intelligent transport systems - Traffic and travel information (TTI) via trans-port protocol experts group, generation 2 (TPEG2) — Part 3: UML to binary conversion rules

C

ISO/TS 21219-4:2015

* Intelligent transport systems — Traffic and travel information (TTI) via trans-port protocol experts group, genera-tion 2 (TPEG2) — Part 4: UML to XML conversion rules

F

ISO/TS 21219-5:2015

* Intelligent transport systems - Traffic and travel information (TTI) via trans-port protocol experts group, generation 2 (TPEG2) — Part 5: Service framework (TPEG2-SFW)

F

ISO/TS 21219-6:2015

* Intelligent transport systems - Traffic and travel information via transport protocol experts group, generation 2(TPEG2) — Part 6: Message manage-ment container (TPEG2-MMC)

C

ISO/TS 21219-18:2015

* Intelligent transport systems - Traffic and travel information (TTI) via trans-port protocol experts group, generation 2 (TPEG2) — Part 18: Traffic flow and prediction application (TPEG2-TFP)

F

TC 215 Health informatics

ISO/IEEE 11073-00103:2015

* Health informatics — Personal health device communication — Part 00103: Overview

G

ISO/IEEE 11073-10441:2015

* Health informatics — Personal health device communication — Part 10441: Device specialization — Cardiovascular fitness and activity monitor

H

ISO/IEEE 11073-10442:2015

* Health informatics — Personal health device communication — Part 10442: Device specialization — Strength fit-ness equipment

F

ISO/IEEE 11073-20601:2010/Amd 1:2015

Health informatics — Personal health device communication — Part 20601: Application profile — Optimized ex-change protocol — Amendment 1

H

ISO/IEEE 11073-30200:2004/Amd 1:2015

Health informatics — Point-of-care medical device communication — Part 30200: Transport profile — Cable con-nected — Amendment 1

F


ISO/TR 80001-2-7:2015

* Application of risk management for IT-networks incorporating medical devices — Application guidance — Part 2-7: Guidance for Healthcare Delivery Organizations (HDOs) on how to self-assess their conformance with IEC 80001-1

H

TC 221 Geosynthetics

ISO 10318-1:2015

* Geosynthetics — Part 1: Terms and definitions

A

ISO 10318-2:2015

Geosynthetics — Part 2: Symbols and pictograms

B

TC 228 Tourism and related services

ISO 17680:2015

* Tourism and related services — Thalas-sotherapy — Service requirements

D

TC 238 Solid biofuels

ISO 16993:2015

Solid biofuels — Conversion of analyti-cal results from one basis to another

B

ISO 16994:2015

Solid biofuels — Determination of total content of sulfur and chlorine

B

TC 261 Additive manufacturing

ISO 17296-2:2015

Additive manufacturing — General principles — Part 2: Overview of pro-cess categories and feedstock

B

TMBG Technical Management Board - groups

ISO 19600:2014

Compliance management systems — Guidelines

E

IULTCS International Union of Leather Technologists and Chemists Societies

ISO 17234-1:2015

Leather — Chemical tests for the determination of certain azo colorants in dyed leathers — Part 1: Determina-tion of certain aromatic amines derived from azo colorants

C


ISO/IEC 14651:2011/Amd 2:2015

Information technology — Interna-tional string ordering and comparison — Method for comparing character strings and description of the common template tailorable ordering — Amend-ment 2

XZ

ISO/IEC 19793:2015

* Information technology — Open Dis-tributed Processing — Use of UML for ODP system specifications

H

ISO/IEC 11695-2:2015

* Identification cards — Optical memory cards — Holographic recording meth-od — Part 2: Dimensions and location of accessible optical area

A

ISO/IEC 16963:2015

* Information technology — Digitally recorded media for information inter-change and storage — Test method for the estimation of lifetime of optical disks for long-term data storage

G

ISO/IEC 14763-3:2014/Cor 1:2015

* Information technology — Imple-mentation and operation of customer premises cabling — Part 3: Testing of optical fibre cabling — Technical Cor-rigendum 1

free

ISO/IEC 27043:2015

* Information technology — Security techniques — Incident investigation principles and processes

E

ISO/IEC 17991:2015

* Information technology — Office equipment — Method for Measuring Scanning Productivity of Digital Multi-functional Devices

E

ISO/IEC 14496-3:2009/Amd 4:2013/Cor 1:2015

* Information technology — Coding of audio-visual objects — Part 3: Audio — Amendment 4: New levels for AAC profiles — Technical Corrigendum 1

free

ISO/IEC 14496-3:2009/Cor 5:2015

* Information technology — Coding of audio-visual objects — Part 3: Audio — Technical Corrigendum 5

free

ISO/IEC 14496-5:2001/Amd 33:2015

* Information technology — Coding of audio-visual objects — Part 5: Refer-ence software — Amendment 33: Ref-erence software for MVC plus depth extension of AVC

XZ

ISO/IEC 14496-5:2001/Amd 27:2011/Cor 1:2015

* Information technology — Coding of audio-visual objects — Part 5: Reference software — Amendment 27: Scalable complexity 3D mesh coding reference software — Technical Cor-rigendum 1

free

ISO/IEC 14496-12:2012/Amd 3:2015

* Information technology — Coding of audio-visual objects — Part 12: ISO base media file format — Amendment 3: Font streams and other improve-ments to file format

XZ

ISO/IEC 14496-12:2012/Cor 3:2015

* Information technology — Coding of audio-visual objects — Part 12: ISO base media file format — Technical Corrigendum 3

free

ISO/IEC 14496-15:2014/Cor 1:2015

* Information technology — Coding of audio-visual objects — Part 15: Carriage of network abstraction layer (NAL) unit structured video in ISO base media file format — Technical Cor-rigendum 1

free

ISO/IEC 14496-16:2011/Cor 1:2015

* Information technology — Coding of audio-visual objects — Part 16: Anima-tion Framework eXtension (AFX) — Technical Corrigendum 1

free

ISO/IEC 14496-26:2010/Cor 8:2015

* Information technology — Coding of audio-visual objects — Part 26: Audio conformance — Technical Corrigen-dum 8

free

ISO/IEC 14496-27:2009/Amd 2:2011/Cor 1:2015

* Information technology — Coding of audio-visual objects — Part 27: 3D Graphics conformance — Amend-ment 2: Scalable complexity 3D mesh coding conformance — Technical Cor-rigendum 1

free

ISO/IEC 14496-29:2015

* Information technology — Coding of audio-visual objects — Part 29: Web video coding

H

ISO/IEC 14496-30:2014/Cor 1:2015

* Information technology — Coding of audio-visual objects — Part 30: Timed text and other visual overlays in ISO base media file format — Technical Corrigendum 1

free


ISO/IEC 15444-1:2004/Cor 4:2015

* Information technology — JPEG 2000 image coding system: Core coding system — Part 1: — Technical Cor-rigendum 4

free

ISO/IEC 15444-12:2012/Amd 3:2015

* Information technology — JPEG 2000 image coding system — Part 12: ISO base media file format — Amendment 3: Font streams and other improve-ments to file format

XZ

ISO/IEC 15444-12:2012/Cor 3:2015

* Information technology — JPEG 2000 image coding system — Part 12: ISO base media file format — Technical Corrigendum 3

free

ISO/IEC 21000-8:2008/Amd 3:2015

* Information technology — Multime-dia framework (MPEG-21) — Part 8: Reference software — Amendment 3: Contract Expression Language (CEL) and Media Contract Ontology (MCO) Reference Software

E

ISO/IEC 21000-21:2013/Cor 1:2015

* Information technology — Multimedia framework (MPEG-21) — Part 21: Media Contract Ontology — Technical Corrigendum 1

free

ISO/IEC 23001-7:2015

* Information technology — MPEG systems technologies — Part 7: Com-mon encryption in ISO base media file format files

C

ISO/IEC 23003-2:2010/Amd 3:2015

* Information technology — MPEG audio technologies — Part 2: Spatial Audio Object Coding (SAOC) — Amendment 3: Dialogue enhancement

XZ

ISO/IEC 23003-3:2012/Cor 3:2015

* Information technology — MPEG audio technologies — Part 3: Unified speech and audio coding — Technical Cor-rigendum 3

free

ISO/IEC 23008-1:2014/Cor 1:2015

* Information technology — High ef-ficiency coding and media delivery in heterogeneous environments — Part 1: MPEG media transport (MMT) — Technical Corrigendum 1

free

ISO/IEC 23008-11:2015

* Information technology — High ef-ficiency coding and media delivery in heterogeneous environments — Part 11: MPEG Media Transport Composi-tion Information

E

ISO/IEC 23009-1:2014/Cor 1:2015

* Information technology — Dynamic adaptive streaming over HTTP (DASH) — Part 1: Media presentation descrip-tion and segment formats — Technical Corrigendum 1

free

ISO/IEC 15459-2:2015

* Information technology — Automatic identification and data capture tech-niques — Unique identification — Part 2: Registration procedures

A

ISO/IEC 11179-5:2015

* Information technology — Metadata registries (MDR) — Part 5: Naming principles

D

ISO/IEC 15944-4:2015

* Information technology — Business Operational View — Part 4: Business transaction scenarios — Accounting and economic ontology

G

ISO/IEC 19763-12:2015

* Information technology — Metamodel framework for interoperability (MFI) — Part 12: Metamodel for information model registration

G

ISO/IEC 13250-5:2015

* Information technology — Topic Maps — Part 5: Reference model

B

ISO/IEC 20006-2:2015

* Information technology for learning, education and training — Information model for competency — Part 2: Profi-ciency level information model

E

ISO/IEC TR 29195:2015

* Traveller processes for biometric rec-ognition in automated border

D

ISO/IEC 29197:2015

* Information technology — Evaluation methodology for environmental influ-ence in biometric system performance

D

ISO/IEC 30121:2015

* Information technology — Governance of digital forensic risk framework

A

Standards confirmed

The following International Standards are confimred for a five year period:

TC 5 Ferrous metal pipes and metallic fittings

ISO 2531:2009

ISO 10802:1992 (reconfirmed)

TC 6 Paper, board and pulps

ISO 5350-1:2006 (reconfirmed)





ISO 29681:2009



TC 10 Technical product documentation





ISO 13526:2010

ISO 22646:2005

TC 22 Road vehicles



TC 23 Tractors and machinery for agriculture and forestry





TC 24 Particle characterization including sieving





ISO 21501-1:2009

TC 27 Solid mineral fuels



TC 28 Petroleum products and related prod-ucts of synthetic or biological origin










ISO 11158:2009

TC 29 Small tools

ISO 10643:2009

















TC 34 Food products





TC 38 Textiles





ISO 10547:2009

ISO 10554:2009

ISO 10556:2009

ISO 10572:2009


ISO 2062:2009


TC 39 Machine tools

ISO 369:2009


ISO 23848-1:2009

ISO 23848-2:2009


ISO 18592:2009

TC 48 Laboratory equipment


ISO 10991:2009

TC 54 Essential oils











ISO 4720:2009













ISO 22769:2009

ISO 23954:2009

TC 58 Gas cylinders


TC 61 Plastics


TC 69 Applications of statistical methods

ISO 24153:2009

TC 74 Cement and lime

ISO 679:2009

ISO 29582-1:2009

TC 76 Transfusion, infusion and injection, and blood processing equipment for medi-cal and pharmaceutical use

ISO 8362-1:2009



TC 85 Nuclear energy, nuclear technologies, and radiological protection



TC 96 Cranes



TC 98 Bases for design of structures



TC 102 Iron ore and direct reduced iron




TC 105 Steel wire ropes


TC 106 Dentistry

ISO 1942:2009


ISO 9168:2009

ISO 4073:2009



TC 107 Metallic and other inorganic coatings


ISO 1461:2009

TC 112 Vacuum technology

ISO 27894:2009

ISO 27895:2009

TC 114 Horology

ISO 3159:2009

TC 117 Fans

ISO 13351:2009

TC 118 Compressors and pneumatic tools, machines and equipment

ISO 28927-1:2009

ISO 28927-2:2009

ISO 28927-3:2009

ISO 28927-5:2009

ISO 28927-6:2009

ISO 28927-7:2009

ISO 28927-8:2009

ISO 28927-9:2009


ISO 7376:2009

ISO 11712:2009

ISO 21969:2009

TC 126 Tobacco and tobacco products

ISO 2965:2009

TC 130 Graphic technology








ISO 4395:2009






ISO 12162:2009

ISO 13967:2009


TC 146 Air quality

ISO 24095:2009





ISO 10704:2009





ISO 14243-1:2009

ISO 14243-2:2009

TC 155 Nickel and nickel alloys






TC 156 Corrosion of metals and alloys





ISO 8407:2009


ISO 21610:2009

TC 162 Doors and windows





TC 164 Mechanical testing of metals




TC 183 Copper, lead, zinc and nickel ores and concentrates






ISO 13584-31:1999

(reconfirmed)

TC 188 Small craft

ISO 12401:2009

TC 212 Clinical laboratory testing and in vitro diagnostic test systems

ISO 15193:2009

ISO 15194:2009




ISO/HL7 27932:2009

ISO/HL7 27951:2009

TC 219 Floor coverings







ISO 24011:2009





IULTCS International Union of Leather Tech-nologists and Chemists Societies

ISO 11644:2009


ISO/IEC 13170:2009

ISO/IEC 29171:2009

ISO/IEC 19757-7:2009

ISO/IEC 12785-1:2009

ISO/IEC 19794-3:2006

ISO/IEC TR 19795-3:2007

ISO/IEC 24708:2008

ISO/IEC 24713-3:2009

ISO/IEC TR 24714-1:2008

ISO/IEC TR 24741:2007

ISO/IEC 29109-1:2009

Standards withdrawn



ISO/PAS 28007:2012

(replaced by ISO 28007-1:2015)

TC 106 Dentistry

ISO 11144:1995 (replaced by ISO 7494-2:2015)


ISO 10933:1997 (replaced by ISO 4437-4:2015)

TC 221 Geosynthetics

ISO 10318:2005 (replaced by ISO 10318-1:2015, ISO 10318-2:2015)


ISO/IEC 15504-2:2003

(replaced by ISO/IEC 33002:2015, ISO/IEC 33003:2015, ISO/IEC 33004:2015, ISO/IEC 33020:2015)

ISO/IEC TR 15504-7:2008

(replaced by ISO/IEC 33001:2015, ISO/IEC 33002:2015, ISO/IEC 33003:2015, ISO/IEC 33004:2015, ISO/IEC TR 33014:2013)

Meeting calendar

(update at 01 March 2015)

Meetings called for the month of February are not in this edition.

* Information definite but meeting not yet formally convened

** Provisional

April 2015

10 London (United Kingdom)

TC 92/SC 1 Fire safety/Fire initia-tion and growth

13 Paris (France) TC 29/SC 2 Small tools/Hold-ing tools, adaptative items and interfaces

13-14 Lyon (France) TC 117 Fans

13-17 Namur (Belgium) TC 34/SC 5 Food products/Milk and milk products

13-17 Vienna (Austria) TC 224 Service activities relating to drinking water supply systems and wastewater systems - Quality criteria of the service and performance indicators

14 Paris (France) TC 29/SC 9 Small tools/Tools with defined cutting edges, cutting items

14-17 London (United Kingdom)

TC 292 Security


TC 67/SC 4 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Drilling and produc-tion equipment

15-17 Kuala Lumpur (Malaysia)

PC 286 Collaborative business relation-ship management -- Framework

15-17 St. Peters-burg (Russian Federation)

TC 172/SC 4 Optics and photonics/Telescopic systems

16 Courbevoie, Paris (France)

TC 29/SC 8 Small tools/Tools for pressing and moulding

16 Tienjin (China) TC 161 Control and protec-tive devices for gas and/or oil burners and appliances


17 Paris (France) TC 29 Small tools

17 Coimbra (Portugal)

TC 92/SC 3 Fire safety/Fire threat to people and environment

19-24 Vico Equense (Italy)

TC 184/SC 4 Automation systems and integration/Indus-trial data

19-24 Hangzhou (China)


19-25 Atlanta (USA) TC 6/SC 2 Paper, board and pulps/Test methods and quality specifica-tions for paper and board

20-22 Zurich (Switzerland)

TC 126 Tobacco and tobacco products


TC 126/SC 1 Tobacco and tobacco products/Physical and dimensional tests


TC 126/SC 2 Tobacco and to-bacco products/Leaf tobacco

20-24 Cherasco (Italy) TC 22/SC 41 Road vehicles/Spe-cific aspects for gase-ous fuels

20-24 St. Augustin (Germany)

TC 94/SC 15 Personal safety -- Protective clothing and equipment/Respiratory protective devices

20-24 San Francisco (USA)


21 Beijing (China) TC 274 Light and lighting

21-22 Düsseldorf (Germany)

TC 44/SC 10 Welding and allied processes/Unification of requirements in the field of metal welding

21-22 Astana (Kazakhstan)

TC 67/SC 2 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Pipeline transporta-tion systems

21-24 San José, Cali-fornia (USA)

TC 171 Document manage-ment applications

21-24 San José, Cali-fornia (USA)

TC 171/SC 1 Document manage-ment applications/Quality

22-23 Milan (Italy) TC 8/SC 12 Ships and marine technology/Ships and marine technology - Large yachts

23 Luxemburg (Luxembourg)

TC 31/SC 3 Tyres, rims and valves/Passenger car tyres and rims


TC 31/SC 10 Tyres, rims and valves/Cycle, moped, motorcycle tyres and rims

23 Düsseldorf (Germany)

TC 44/SC 11 Welding and allied processes/Qualifica-tion requirements for welding and allied processes personnel

23-24 Buenos Aires (Argentina)

TC 34/SC 12 Food products/Sen-sory analysis

24 Cherasco (Italy) ** TC 22/SC 25 Road vehicles/Vehi-cles using gaseous fuels


TC 31 Tyres, rims and valves

24 San José, Cali-fornia (USA)

TC 171/SC 2 Document manage-ment applications/Application issues

24-27 Washington, D.C (USA)

TC 272 Forensic sciences

25 Atlanta (USA) TC 6 Paper, board and pulps

30 Virtual (Unknown)

President's committee



TC 30/SC 2 Measurement of fluid flow in closed conduits/Pressure differential devices


TC 30/SC 5 Measurement of fluid flow in closed conduits/Velocity and mass methods

April-May 2015


TC 30 Measurement of fluid flow in closed conduits

May 2015

4-7 Toronto (Canada) TC 68 Financial services

4-7 Buxton (United Kingdom)

TC 94/SC 15 Personal safety -- Protective clothing and equipment/Respiratory protective devices

5-6 Rio de Janeiro (Brazil)

TC 67/SC 6 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Processing equip-ment and systems

6 Toronto (Canada) TC 68 Financial services

6 Toronto (Canada) TC 68/SC 2 Financial services/Financial Services, security

6 Toronto (Canada) TC 68/SC 7 Financial services/Core banking


JTC 1/SC 7 Information technol-ogy/Software and systems engineering

11-12 Kuching (Malaysia)

JTC 1/SC 27 Information tech-nology/IT Security techniques

11-12 Ottawa (Canada) TC 159/SC 4 Ergonomics/Ergo-nomics of human-system interaction

11-15 Ohio (USA) TC 184/SC 5 Automation systems and integration/Inter-operability, integra-tion, and architec-tures for enterprise systems and automa-tion applications

11-16 Bologna (Italy) TC 130 Graphic technology


* TC 67/SC 6 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Processing equip-ment and systems

12-15 Beijing (China) TC 156 Corrosion of metals and alloys


12-15 Shanghai (China) TC 172/SC 7 Optics and photon-ics/Ophthalmic optics and instruments

13 Tokyo (Japan) TC 10/SC 6 Technical product documentation/Me-chanical engineering documentation

13 Turin (Italy) TC 22/SC 35 Road vehicles/Light-ing and visibility

13 Paris (France) TC 87 Cork

14 Tokyo (Japan) TC 10/SC 1 Technical product documentation/Basic conventions

15 Tokyo (Japan) TC 10 Technical product documentation

17-22 Copenhagen (Denmark)

TC 173/SC 1 Assistive products for persons with disability/Wheelchairs


TC 4/SC 7 Rolling bearings/Spherical plain bearings

18-21 Prague (Czech Republic)

* TC 229 Nanotechnologies

18-22 Glasgow, Scotland (United Kingdom)

JTC 1/SC 32 Information technolo-gy/Data management and interchange

18-22 Sao Paulo (Brazil)

JTC 1/SC 40 Information tech-nology/IT Service Management and IT Governance

18-22 Chengdu (China) TC 39/SC 2 Machine tools/Test conditions for metal cutting machine tools

18-22 Luzern (Switzerland)

TC 114 Horology

20 Okinawa (Japan) TC 131/SC 4 Fluid power systems/Connectors and similar products and components

20 Okinawa (Japan) TC 131/SC 6 Fluid power systems/Contamination control

20 Okinawa (Japan) TC 131/SC 9 Fluid power systems/Installations and systems


TC 4/SC 8 Rolling bearings/Load ratings and life

19 Naples (Italy) TC 29/SC 5 Small tools/Grinding wheels and abrasives

19 Turin (Italy) TC 89/SC 3 Wood-based panels/Plywood

19 Luzern (Switzerland)

TC 114/SC 3 Horology/Water-resistant watches


TC 4/SC 11 Rolling bearings/Linear motion rolling bearings

20 Nagano (Japan) TC 20/SC 13 Aircraft and space vehicles/Space data and information trans-fer systems

20 Turin (Italy) TC 89 Wood-based panels

20 Turin (Italy) TC 89/SC 1 Wood-based panels/Fibre boards

20 Turin (Italy) TC 89/SC 2 Wood-based panels/Particle boards


TC 114/SC 14

Horology/Table and wall clocks

20 Okinawa (Japan) TC 131 Fluid power systems


TC 4/SC 4 Rolling bearings/Tolerances, tolerance definitions and sym-bols (including GPS)


TC 4/SC 5 Rolling bearings/Needle, cylindrical and spherical roller bearings


TC 4/SC 12 Rolling bearings/Ball bearings


TC 114/SC 12

Horology/Antimagnetism

21-22 Copenhagen (Denmark)


21-22 Yangzhou (China)

TC 293 Feed machinery



22 Los Angeles (USA)

TC 119 Powder metallurgy

22 Cape Town (South Africa)

TC 228 Tourism and related services

24-29 Tokyo (Japan) TC 113 Hydrometry

25 Tokyo (Japan) TC 113/SC 1 Hydrometry/Velocity area methods

25-29 Madrid (Spain) TC 23/SC 18 Tractors and machin-ery for agriculture and forestry/Irrigation and drainage equipment and systems

25-29 Vancouver (Canada)

TC 282/SC 2 Water re-use/Water re-use in urban areas

26 Tokyo (Japan) TC 113/SC 6 Hydrometry/Sediment transport

26-27 Ghent (Belgium) JTC 1/SC 6 Information technol-ogy/Telecommunica-tions and information exchange between systems

26-27 Greenville (USA) TC 31/SC 9 Tyres, rims and valves/Valves for tube and tubeless tyres

26-29 Buenos Aires (Argentina)

TC 85/SC 5 Nuclear energy, nuclear technolo-gies, and radiological protection/Nuclear fuel cycle

27 Geneva (Switzerland)

TAG 14 Image Technology


TC 67/SC 5 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Casing, tubing and drill pipe

27 Tokyo (Japan) TC 113/SC 8 Hydrometry/Ground water

27 Vancouver (Canada)

TC 282/SC 3 Water re-use/Risk and performance evaluation of water re-use systems


TC 282/SC 1 Water re-use/Treated wastewater re-use for Irrigation

27-29 Panama (Panama)

TC 8/SC 1 Ships and marine technology/Lifesaving and fire protection





28 Tokyo (Japan) TC 113/SC 2 Hydrometry/Flow measurement structures

28 Tokyo (Japan) TC 113/SC 5 Hydrometry/In-struments, equip-ment and data management

London (United Kingdom)

** TC 131/SC 6 Fluid power systems/Contamination control

June 2015

1-4 Beijing (China) TC 46/SC 11 Information and doc-umentation/Archives/records management

1-4 Beijing (China) TC 249 Traditional chinese medicine

1-5 Arlington (USA) TC 20/SC 14 Aircraft and space ve-hicles/Space systems and operations

1-5 Guayaquil (Ecuador)

TC 34/SC 18 Food products/Cocoa

1-5 Sapporo (Japan) TC 42 Photography

1-5 Seattle (USA) TC 43/SC 3 Acoustics/Underwa-ter acoustics

1-5 Beijing (China) TC 46/SC 4 Information and documentation/Tech-nical interoperability

1-6 Philadelphia (USA)


2-4 Shizuoka City (Japan)

TC 34/SC 8 Food products/Tea

2-9 Matsue (Japan) JTC 1/SC 28 Information technol-ogy/Office equipment

3-4 Nanjing (China) TC 155 Nickel and nickel alloys

3-5 Glasgow, Scotland (United Kingdom)

TC 267 Facilities management

4 Beijing (China) TC 46/SC 8 Information and documentation/Quality - Statistics and performance evaluation

4 Beijing (China) TC 46/SC 9 Information and documentation/Identification and description

4 Beijing (China) TC 46/SC 10 Information and documentation/Requirements for document storage and conditions for preservation

4 Tokyo (Japan) TC 145/SC 1 Graphical symbols/Public information symbols

4-5 Merida (Mexico) TC 242 Energy Management

5 Paris (France) TC 22/SC 36 Road vehicles/Safety aspects and impact testing

5 Beijing (China) TC 46 Information and documentation

5 Tokyo (Japan) TC 145 Graphical symbols

5 Tokyo (Japan) TC 145/SC 3 Graphical symbols/Graphical symbols for use on equipment

5-6 San Antonio (USA)

TC 85/SC 6 Nuclear energy, nuclear technolo-gies, and radiological protection/Reactor technology

8-9 Chicago (USA) TC 34/SC 15 Food products/Coffee

8-10 Arlington (USA) TC 20/SC 16 Aircraft and space vehicles/Unmanned aircraft systems

8-12 Houston (USA) TC 35 Paints and varnishes

8-12 Berlin (Germany) TC 121 Anaesthetic and res-piratory equipment

8-12 Berlin (Germany) * TC 121/SC 1 Anaesthetic and res-piratory equipment/Breathing attach-ments and anaes-thetic machines

8-12 Grasmere (Unit-ed Kingdom)

TC 268 Sustainable develop-ment in communities

9 Hokaido (Japan) TC 31/SC 6 Tyres, rims and valves/Off-the-road tyres and rims

9-10 New York (USA) TC 29/SC 10 Small tools/Assem-bly tools for screws and nuts, pliers and nippers

9-12 Pretoria (South Africa)

REMCO Committee on refer-ence materials


TC 289 Brand evaluation

10 Sapporo (Japan) * TC 31/SC 7 Tyres, rims and valves/Industrial tyres and rims

10-11 La Plaine St-Denis (France)

TC 17/SC 9 Steel/Tinplate and blackplate

11 Sapporo (Japan) * TC 31/SC 5 Tyres, rims and valves/Agricultural tyres and rims

11 Houston (USA) TC 35/SC 9 Paints and varnishes/General test meth-ods for paints and varnishes

11 Houston (USA) TC 35/SC 14 Paints and varnishes/Protective paint systems for steel structures

11 York (United Kingdom)

TC 238 Solid biofuels

11 Grasmere (Unit-ed Kingdom)

** TC 268/SC 1 Sustainable develop-ment in communities/Smart community infrastructures

11-12 Paris (France) TC 24/SC 4 Particle charac-terization includ-ing sieving/Particle characterization

11-12 Southamp-ton (United Kingdom)

TC 211 Geographic in-formation/Geomatics

12 Zedelgem (Belgium)

TC 23/SC 7 Tractors and machin-ery for agriculture and forestry/Equipment for harvesting and conservation





TC 17/SC 11 Steel/Steel castings


15-16 Kyoto (Japan) TC 22/SC 32 Road vehicles/Elec-trical and electronic components and gen-eral system aspects


TC 22/SC 39 Road vehicles/Ergonomics

15-18 Boras (Sweden) TC 85/SC 2 Nuclear energy, nuclear technologies, and radiological pro-tection/Radiological protection


PC 277 Sustainable procurement


** TC 22/SC 13 Road vehicles/Ergo-nomics applicable to road vehicles

15-19 Munich (Germany)

TC 94/SC 14 Personal safety -- Protective clothing and equipment/Fire-fighters' personal equipment


TC 17/SC 17 Steel/Steel wire rod and wire products

17-19 Berlin (Germany) TC 172/SC 9 Optics and photon-ics/Electro-optical systems

18-19 Stuttgart (Germany)

TC 184/SC 2 Automation systems and integration/Robots and robotic devices

18-19 Geneva (Switzerland)

TMB Technical Manage-ment Board

19 Beijing (China) TC 220 Cryogenic vessels

21-26 Matsue (Japan) TC 37 Terminology and other language and content resources

22-23 Dallas (USA) * TC 20/SC 17 Aircraft and space vehicles/Airport infrastructure

22-25 Avignon (France) TC 54 Essential oils

22-25 Stockholm (Sweden)

** TC 149 Cycles

22-26 Rouen (France) JTC 1/SC 36 Information tech-nology/Information technology for learn-ing, education and training

22-26 Gjøvik (Norway) * JTC 1/SC 37 Information technology/Biometrics

22-26 (Netherlands) ** TC 34/SC 9 Food products/Microbiology

22-26 Dalian (China) TC 69 Applications of statis-tical methods

22-26 Dalian (China) TC 69/SC 5 Applications of sta-tistical methods/Ac-ceptance sampling

22-26 Dalian (China) TC 69/SC 6 Applications of statis-tical methods/Meas-urement methods and results

22-26 Dalian (China) TC 69/SC 8 Applications of sta-tistical methods/Ap-plication of statistical and related methodol-ogy for new technol-ogy and product development

22-26 La Plaine St-Denis (France)

TC 94/SC 6 Personal safety -- Protective clothing and equipment/Eye and face protection

22-26 Göteborg (Sweden)

* TC 188 Small craft

24 Porto (Portugal) ** TC 17/SC 15 Steel/Railway rails, rails fasteners, wheels and wheelsets


TC 17/SC 4 Steel/Heat treatable and alloy steels


* TC 20/SC 1 Aircraft and space vehicles/Aerospace electrical requirements

25 Göteborg (Sweden)

* TC 188/SC 2 Small craft/Engines and propulsion systems

26 Gaithersburg (USA)

TC 12 Quantities and units

27 Warsaw (Poland) * JTC 1/SC 29 Information technol-ogy/Coding of audio, picture, multimedia and hypermedia information

Montreal (Canada)

** JTC 1/SC 31 Information technol-ogy/Automatic iden-tification and data capture techniques

June-July 2015

30-3 Milan (Italy) * TC 193 Natural gas

30-3 Milan (Italy) * TC 193/SC 1 Natural gas/Analysis of natural gas

30-3 Milan (Italy) * TC 193/SC 3 Natural gas/Upstream area

2nd Quarter 2015

Istanbul (Turkey) ** TC 120 Leather

July 2015

1-7 Berlin (Germany) * TC 91 Surface active agents

2-3 Shanghai (China) TC 8/SC 4 Ships and marine technology/Outfitting and deck machinery

6-7 Helsinki (Finland) ** TC 44/SC 10 Welding and allied processes/Unification of requirements in the field of metal welding

7-8 Helsinki (Finland) TC 44/SC 7 Welding and allied processes/Represen-tation and terms

8 Helsinki (Finland) TC 44/SC 5 Welding and allied processes/Testing and inspection of welds

8 Helsinki (Finland) TC 44/SC 9 Welding and allied processes/Health and safety

8 Bath (United Kingdom)

TC 184/SC 1 Automation systems and integration/Physi-cal device control

8-9 Berlin (Germany) TC 51 Pallets for unit load method of materials handling

9-10 Helsinki (Finland) TC 44 Welding and allied processes

14-17 Shanghai (China) TC 8/SC 8 Ships and marine technology/Ship design


16 Berlin (Germany) TC 261 Additive manufacturing

31 Arlington (USA) TC 86/SC 6 Refrigeration and air-conditioning/Testing and rating of air-conditioners and heat pumps

Hangzhou (China)

** TC 8/SC 13 Ships and marine technology/Marine technology

August 2015

24-28 Toronto (Canada) * TC 258 Project, programme and portfolio management


TC 105 Steel wire ropes

26-28 Jeju (Korea, Republic of)

* TC 206 Fine ceramics

August-September 2015

31-4 Hokaido (Japan) * JTC 1/SC 35 Information technol-ogy/User interfaces

September 2015

4-12 New Delhi (India) ** TC 207 Environmental management

7 Tedding-ton (United Kingdom)

* TC 164/SC 2 Mechanical testing of metals/Ductility testing

7-11 Tokyo (Japan) TC 133 Clothing sizing sys-tems - size designa-tion, size measure-ment methods and digital fittings

7-11 Paris (France) * TC 153 Valves

7-11 Tedding-ton (United Kingdom)

TC 164 Mechanical testing of metals

7-14 Sydney (Australia)

** TC 96 Cranes

8-10 Tedding-ton (United Kingdom)

* TC 164/SC 5 Mechanical testing of metals/Fatigue testing


* TC 164/SC 1 Mechanical testing of metals/Uniaxial testing


* TC 164/SC 4 Mechanical testing of metals/Toughness testing -- Fracture (F), Pendulum (P), Tear (T)


* TC 164/SC 3 Mechanical testing of metals/Hardness testing

13 Seoul (Korea, Republic of)

* President's committee


13 Seattle (USA) ** TC 201/SC 6 Surface chemi-cal analysis/Sec-ondary ion mass spectrometry

13-17 Lahaina, Hawaii (USA)

** TC 127 Earth-moving machinery


* COUNCIL Council


* JTC 1/SC 22 Information technol-ogy/Programming languages, their envi-ronments and system software interfaces


TC 157 Non-systemic con-traceptives and STI barrier prophylactics

14-18 Milan (Italy) * TC 43 Acoustics

14-18 Berlin (Germany) ** TC 150 Implants for surgery

14-18 (Canada) ** TC 205 Building environment design

14-25 Berlin (Germany) * TC 213 Dimensional and geometrical product specifications and verification


* DEVCO Committee on devel-oping country matters

15 Vienna (Austria) * TC 33 Refractories


* TMB Technical Manage-ment Board

15-17 Pittsburgh (USA) TC 94/SC 15 Personal safety -- Protective clothing and equipment/Respiratory protective devices

16-18 Seoul (Korea, Republic of)

* GA General Assembly


* CSC/FIN Council/Council Standing Committee on Finance (CSC/FIN)

17-18 Delft (Netherlands)

TC 67 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries

17-18 (Canada) ** TC 163 Thermal performance and energy use in the built environment

18-19 Hawaii (USA) TC 23/SC 14 Tractors and machin-ery for agriculture and forestry/Operator controls, operator symbols and other displays, operator manuals

20-26 Williamsburg (USA)

* TC 27 Solid mineral fuels


** TC 146/SC 1 Air quality/Stationary source emissions

21-25 Poznan (Poland) ** TC 23/SC 6 Tractors and machin-ery for agriculture and forestry/Equipment for crop protection


** TC 146/SC 6 Air quality/Indoor air

23-24 (China) ** TC 290 Online reputation

24-25 Gouda (Netherlands)

* TC 34/SC 11 Food products/Animal and vegetable fats and oils

28-29 Basel (Switzerland)

** TC 44/SC 8 Welding and allied processes/Equip-ment for gas welding, cutting and allied processes

29-30 Tokyo (Japan) * TC 44/SC 3 Welding and allied processes/Welding consumables

(Europe) ** TC 22/SC 19 Road vehicles/Wheels

14-18 Milan (Italy) * TC 43/SC 1 Acoustics/Noise

14-18 Milan (Italy) TC 43/SC 2 Acoustics/Building acoustics

Berlin (Germany) ** TC 146/SC 2 Air quality/Workplace atmospheres


Johor Bahru (Malaysia)

** TC 165 Timber structures

September-October 2015

27-3 Bangkok (Thailand)

* TC 106 Dentistry


** PC 278 Anti-bribery manage-ment systems

28-2 Paris (France) TC 86/SC 1 Refrigeration and air-conditioning/Safety and environmental requirements for re-frigerating systems

28-2 Edmonton (Canada)

TC 229 Nanotechnologies

October 2015

1 Rome (Italy) * TC 39/SC 4 Machine tools/Wood-working machines

2 Paris (France) TC 86/SC 8 Refrigeration and air-conditioning/Refriger-ants and refrigeration lubricants

5 Bloomington (USA)

** TC 23/SC 13 Tractors and machin-ery for agriculture and forestry/Powered lawn and garden equipment

5 Madrid (Spain) TC 59 Buildings and civil engineering works

5-9 Dublin (Ireland) * JTC 1/SC 38 Information technol-ogy/Cloud Comput-ing and Distributed Platforms

5-9 Madrid (Spain) * TC 59/SC 3 Buildings and civil engineering works/Functional/user requirements and performance in build-ing construction

5-9 Madrid (Spain) * TC 59/SC 15 Buildings and civil engineering works/Performance descrip-tion of houses

5-9 Madrid (Spain) * TC 59/SC 16 Buildings and civil engineering works/Accessibility and usability of the built environment

5-9 Vienna (Austria) * TC 190 Soil quality

5-9 Vienna (Austria) * TC 190/SC 2 Soil quality/Sampling

5-9 Vienna (Austria) * TC 190/SC 3 Soil quality/Chemi-cal methods and soil characteristics

5-9 Vienna (Austria) * TC 190/SC 4 Soil quality/Biological methods

5-9 Vienna (Austria) * TC 190/SC 7 Soil quality/Soil and site assessment

6 Lyon (France) * IULTCS International Union of Leather Technolo-gists and Chemists Societies

8 Virtual (Unknown)

* President's committee


8-9 Sao Paulo (Brazil)

* TC 58/SC 2 Gas cylinders/Cylin-der fittings

9 Copenhagen (Denmark)

* TC 254 Safety of amusement rides and amusement devices

12-16 Paris (France) * TC 34/SC 17 Food products/Man-agement systems for food safety

12-16 Turin (Italy) ** TC 70 Internal combustion engines

12-16 Beijing (China) * TC 181 Safety of toys

12-17 Beijing (China) * TC 20 Aircraft and space vehicles

12-17 Beijing (China) * TC 20/SC 4 Aircraft and space vehicles/Aerospace fastener systems

12-17 Beijing (China) * TC 20/SC 8 Aircraft and space vehicles/Aerospace terminology

13 Lyon (France) * TC 38/SC 1 Textiles/Tests for coloured textiles and colorants

13 Lyon (France) * TC 38/SC 2 Textiles/Cleansing, finishing and water resistance tests

13-14 Osaka (Japan) * TC 24/SC 4 Particle charac-terization includ-ing sieving/Particle characterization

14 Lyon (France) * TC 38/SC 23 Textiles/Fibres and yarns

14 Lyon (France) * TC 38/SC 24 Textiles/Condition-ing atmospheres and physical tests for textile fabrics

15 Lyon (France) * TC 38 Textiles

15-17 Seattle (USA) * TC 201 Surface chemical analysis

16 San Diego (USA) * TC 22/SC 34 Road vehicles/Propul-sion, powertrain and powertrain fluids

18-23 Vichy (France) TC 45 Rubber and rubber products

18-23 Vichy (France) TC 45/SC 4 Rubber and rubber products/Products (other than hoses)

18-23 Baltimore (USA) * TC 184/SC 4 Automation systems and integration/Indus-trial data

19-21 Jeju (Korea, Republic of)

* TC 281 Fine Bubble Technology

19-22 Vichy (France) TC 45/SC 1 Rubber and rubber products/Rubber and plastics hoses and hose assemblies

19-23 (Germany) ** TC 39/SC 2 Machine tools/Test conditions for metal cutting machine tools

19-23 Gaithersburg (USA)

* TC 92 Fire safety

19-23 Gaithersburg (USA)

* TC 92/SC 1 Fire safety/Fire initia-tion and growth

19-23 Brussels (Belgium)

TC 154 Processes, data elements and documents in com-merce, industry and administration

20 Metz (France) TC 173/SC 2 Assistive products for persons with disabil-ity/Classification and terminology

20-23 Oslo (Norway) ** TC 58/SC 3 Gas cylinders/Cylin-der design

20-23 Beijing (China) * TC 269 Railway applications


21-23 Katowize (Poland)

TC 263 Coalbed methane (CBM)

21-24 Santiago (Chile) * TC 195 Building construc-tion machinery and equipment


* TC 79/SC 2 Light metals and their alloys/Or-ganic and anodic oxidation coatings on aluminium

22-23 Berlin (Germany) * TC 209 Cleanrooms and as-sociated controlled environments

26-29 Pretoria (South Africa)

** TC 264 Fireworks



26-30 Porto Alegre (Brazil)

TC 23/SC 17 Tractors and machin-ery for agriculture and forestry/Manu-ally portable forest machinery

26-31 (China) ** JTC 1 Information technology

27-29 Berlin (Germany) * TC 256 Pigments, dyestuffs and extenders

28-30 Tsukuba (Japan) ** TC 202 Microbeam analysis


* TC 71 Concrete, reinforced concrete and pre-stressed concrete

29-30 Tampa, Florida (USA)

* TC 17/SC 12 Steel/Continuous mill flat rolled products

(Unknown) ** TC 2 Fasteners

Madrid (Spain) ** TC 10/SC 8 Technical prod-uct documenta-tion/Construction documentation

(Netherlands) ** TC 34/SC 2 Food products/Ole-aginous seeds and fruits and oilseed meals

Washington, D.C (USA)

** TC 79 Light metals and their alloys

Rio de Janeiro (Brazil)

** TC 130 Graphic technology

Sao Paulo (Brazil)

** TC 135/SC 9 Non-destructive test-ing/Acoustic emission testing

(Turkey) ** TC 180 Solar energy

(Germany) ** TC 244 Industrial furnaces and associated pro-cessing equipment

(China) ** TC 282/SC 3 Water re-use/Risk and performance evaluation of water re-use systems

November 2015

2 Atlanta (USA) * TC 41/SC 3 Pulleys and belts (including veebelts)/Conveyor belts

2-6 Bern (Switzerland)


2-6 Beijing (China) * TC 282 Water re-use

3 Atlanta (USA) * TC 41/SC 1 Pulleys and belts (including veebelts)/Friction

3 Berlin (Germany) * TC 83 Sports and other recreational facilities and equipment

3-5 Montreal (Canada)

TC 20/SC 9 Aircraft and space vehicles/Air cargo and ground equipment

4 Atlanta (USA) TC 41/SC 4 Pulleys and belts (including veebelts)/Synchronous belt drives

5 Atlanta (USA) * TC 41 Pulleys and belts (including veebelts)

9-12 (Spain) ** TC 189 Ceramic tile


* PC 287 Chain of custody of wood and wood-based products

9-13 Kobe (Japan) * TC 21 Equipment for fire protection and fire fighting

9-13 Tokyo (Japan) TC 94/SC 15 Personal safety -- Protective clothing and equipment/Respiratory protective devices


* TC 275 Sludge recovery, recycling, treatment and disposal

9-14 Galveston (USA) * TC 260 Human resource management

10-13 (Switzerland) ** TC 112 Vacuum technology

11 Notting-ham (United Kingdom)

* TC 60 Gears

11-13 (Malaysia) ** TC 123 Plain bearings


** TC 227 Springs

16 (USA) ** PC 252 Natural gas fuelling stations for vehicles

16-20 (Ghana) ** TC 36 Cinematography

16-20 Kyoto (Japan) TC 160 Glass in building

16-20 (USA) ** TC 210 Quality management and corresponding general aspects for medical devices


* TC 98/SC 3 Bases for design of structures/Loads, forces and other actions

20-28 Hong Kong (Hong Kong, China)

* TC 176 Quality management and quality assurance

Pretoria (South Africa)

** TC 212 Clinical laboratory testing and in vitro di-agnostic test systems

November-December 2015

16-21 Virginia (USA) TC 98 Bases for design of structures

December 2015

3-4 Torrance (USA) * TC 197 Hydrogen technologies

10 Berlin (Germany) * TC 44/SC 6 Welding and allied processes/Resistance welding and allied mechanical joining

14-18 Berlin (Germany) TC 198 Sterilization of health care products

(United Arab Emirates)

** TC 217 Cosmetics


4th Quarter 2015

(Sweden) ** TC 17/SC 1 Steel/Methods of de-termination of chemi-cal composition

Dayton, Ohio (USA)

** TC 159/SC 3 Ergonomics/An-thropometry and biomechanics

Tel Aviv (Israel) ** TC 282 Water re-use

(Indonesia) ** TC 292 Security

2nd Semester 2015

(France) ** TC 172/SC 1 Optics and photon-ics/Fundamental standards

Month unknown 2015

Berlin (Germany) ** TC 138 Plastics pipes, fittings and valves for the transport of fluids

(Japan) ** TC 142 Cleaning equipment for air and other gases

January 2016


** TC 107 Metallic and other inorganic coatings


** TC 107/SC 3 Metallic and other inorganic coatings/Electrodeposited coatings and related finishes


** TC 107/SC 8 Metallic and other inorganic coatings/Chemical conversion coatings

(China) ** TC 120 Leather

February 2016

26 Nairobi (Kenya) * TMB Technical Manage-ment Board

(South Africa) ** TC 58/SC 4 Gas cylinders/Opera-tional requirements for gas cylinders

(USA) ** TC 213 Dimensional and geometrical product specifications and verification

(United Kingdom)

** TC 257 Evaluation of energy savings

March 2016

3-4 (Unknown) ** TC 182/SC 1 Geotechnics/Geo-technical investiga-tion and testing


** TC 108/SC 2 Mechanical vibration, shock and condition monitoring/Measure-ment and evalua-tion of mechanical vibration and shock as applied to ma-chines, vehicles and structures


** TC 108/SC 5 Mechanical vibration, shock and condition monitoring/Condition monitoring and diag-nostics of machine systems


* COUNCIL Council

1st Quarter 2016

Singapore (Singapore)

** TC 67/SC 7 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Offshore structures

April 2016


** TC 178 Lifts, escalators and moving walks

Seoul (Korea, Republic of)

** TC 161 Control and protec-tive devices for gas and/or oil burners and appliances

May 2016

25 Brussels (Belgium)

** TC 115 Pumps

(Brazil) ** TC 67/SC 4 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Drilling and produc-tion equipment

(India) ** TC 85 Nuclear energy, nuclear technolo-gies, and radiological protection

(Korea, Repub-lic of)

** TC 122 Packaging

Stockholm (Sweden)

** TC 130 Graphic technology

(USA) ** TC 282/SC 3 Water re-use/Risk and performance evaluation of water re-use systems

June 2016


* TMB Technical Manage-ment Board

18-20 Munich (Germany)

TC 135 Non-destructive testing

(Germany) ** JTC 1/SC 36 Information tech-nology/Information technology for learn-ing, education and training

(Europe) ** TC 22/SC 38 Road vehicles/Motor-cycles and mopeds

2nd Quarter 2016

(Germany) ** TC 34/SC 4 Food products/Cere-als and pulses

1st Semester 2016

(France) ** TC 23 Tractors and machin-ery for agriculture and forestry

New Delhi (India) ** TC 34/SC 7 Food products/Spic-es, culinary herbs and condiments

(China) ** TC 34/SC 16 Food products/Hori-zontal methods for molecular biomarker analysis

September 2016

19 Beijing (China) * COUNCIL Council

20 Beijing (China) * TMB Technical Manage-ment Board

21-23 Beijing (China) * GA General Assembly


Vienna (Austria) ** JTC 1/SC 22 Information technol-ogy/Programming languages, their envi-ronments and system software interfaces

Paris (France) ** TC 17 Steel

Sao Paulo (Brazil)

** TC 209 Cleanrooms and as-sociated controlled environments

Shanghai (China) ** TC 213 Dimensional and geometrical product specifications and verification

Beijing (China) ** TC 256 Pigments, dyestuffs and extenders

3rd Quarter 2016

(USA) ** TC 289 Brand evaluation

October 2016

17-21 (China) ** TC 5/SC 2 Ferrous metal pipes and metallic fittings/Cast iron pipes, fit-tings and their joints


* TC 58 Gas cylinders

(Brazil) ** TC 59 Buildings and civil engineering works


** TC 201 Surface chemical analysis

(Israel) ** TC 282/SC 3 Water re-use/Risk and performance evaluation of water re-use systems

November 2016

(Norway) ** JTC 1 Information technology

4th Quarter 2016

Delft (Netherlands)

** TC 28 Petroleum products and related products of synthetic or bio-logical origin

Delft (Netherlands)

** TC 28/SC 5 Petroleum products and related products of synthetic or bio-logical origin/Meas-urement of refriger-ated hydrocarbon and non-petroleum based liquefied gaseous fuels

Delft (Netherlands)

** TC 28/SC 7 Petroleum products and related products of synthetic or bio-logical origin/Liquid Biofuels

Month unknown 2016


** JTC 1/SC 23 Information technolo-gy/Digitally Recorded Media for Informa-tion Interchange and Storage

(Russian Federation)

** REMCO Committee on refer-ence materials

(Denmark) ** TC 37 Terminology and other language and content resources

(South Africa) ** TC 44 Welding and allied processes

(Malaysia) ** TC 45 Rubber and rubber products

Wellington (New Zealand)

** TC 46 Information and documentation

Wellington (New Zealand)

** TC 46/SC 11 Information and doc-umentation/Archives/records management

(Sweden) ** TC 102 Iron ore and direct reduced iron

(Japan) ** TC 138/SC 2 Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for water supplies

(Japan) ** TC 183 Copper, lead, zinc and nickel ores and concentrates

June 2017

(Australia) ** JTC 1/SC 36 Information tech-nology/Information technology for learn-ing, education and training

September 2017

London (United Kingdom)

** JTC 1/SC 22 Information technol-ogy/Programming languages, their envi-ronments and system software interfaces

New Delhi (India) ** TC 178 Lifts, escalators and moving walks

3rd Quarter 2017

Vienna (Austria) ** TC 289 Brand evaluation

June 2018


** JTC 1/SC 36 Information tech-nology/Information technology for learn-ing, education and training

iso update · iso update, supplement to iso ... — magnetic particle testing 2015-06-20 ... hose...

Documents