iso update · iso update, supplement to iso focus ... iec/cd 60601-2-26 medical electrical...

ISO Update Supplement to ISOfocus

September 2016

ISO Update, Supplement to ISO Focus -- September 2016 1

International Standards in process

An International Standard is the result of an agreement between the member bodies of ISO. A first important step towards an Interna-tional Standard takes the form of a committee draft (CD) - this is cir-culated for study within an ISO technical committee. When consensus has been reached within the technical committee, the document is sent to the Central Secretariat for processing as a draft International Standard (DIS). The DIS requires approval by at least 75 % of the member bodies casting a vote. A confirmation vote is subsequently carried out on a final draft International Standard (FDIS), the approval criteria remaining the same.

CD registered

Period from 01 August to 31 August 2016

These documents are currently under consideration in the technical committee.

They have been registred at the Central Secretariat.

TC 4 Rolling bearings

ISO/CD 3096 Rolling bearings — Needle rollers — Dimen-sions and tolerances

ISO/CD 7063 Rolling bearings — Needle roller bearing track rollers — Boundary dimensions and tolerances

TC 8 Ships and marine technology

ISO/CD 25862 Ships and marine technology — Marine magnetic compasses, binnacles and azimuth reading devices

TC 20 Aircraft and space vehicles

ISO/DTR 21891

Aerospace electrical requirements — Sleeves and moulded shapes — Specifications for aircraft use

ISO/CD 20780 Space systems — Fiber optic components — Design and verification requirements

TC 21 Equipment for fire protection and fire fighting

ISO/CD TS 7240-29

Fire detection and alarm systems — Part 29: Video fire detectors

TC 22 Road vehicles

ISO/CD 15118-1

Road vehicles — Vehicle to grid communica-tion interface — Part 1: General information and use-case definition

TC 23 Tractors and machinery for agriculture and forestry

ISO/CD 4254-16

Agricultural machinery — Safety — Part 16: Portable agricultural grain conveying equipment

ISO/CD 5687 Equipment for harvesting — Combine har-vesters — Determination and designation of grain tank capacity and unloading device performance

TC 27 Solid mineral fuels

ISO/CD 18894 Coke — Determination of coke reactivity index (CRI) and coke strength after reaction (CSR)

ISO/CD 20336 Solid mineral fuels — Determination total sulfur by Coulomb titration method

TC 35 Paints and varnishes

ISO/CD 11126-8

Preparation of steel substrates before ap-plication of paints and related products — Specifications for non-metallic blast-cleaning abrasives — Part 8: Olivine sand

TC 38 Textiles

ISO/CD 18692-1

Fibre ropes for offshore stationkeeping — Part 1: General specification

ISO/CD 18692-2

Fibre ropes for offshore stationkeeping — Part 2: Polyester

TC 39 Machine tools

ISO/CD 16092-2

Machine tools - Safety for presses — Part 2: Mechanical presses

ISO/CD 16092-4

Machine tools - Safety for presses — Part 4: Pneumatic presses

TC 42 Photography

ISO/CD 18948 Imaging Materials — Photo Books — Test Methods for Permanence and Durability

ISO/DTR 19263-1

Photography — Archiving systems — Part 1: Best practices for digital image capture of cultural heritage material

ISO/DTS 19264-1

Photography — Archiving systems — Image quality analysis — Part 1: Reflective originals

TC 45 Rubber and rubber products

ISO/CD 20927 Rubber compounding ingredients — Determi-nation of particle size distribution of silica by photosedimentometry (DCP)

TC 46 Information and documentation

ISO/DTR 19814

Information and documentation — Holdings management for archive and library holdings

TC 58 Gas cylinders

ISO/CD 14245 Gas cylinders — Specifications and testing of LPG cylinder valves — Self-closing

ISO/CD 15995 Gas cylinders — Specifications and testing of LPG cylinder valves — Manually operated

TC 59 Buildings and civil engineering works

ISO/CD 19650-1

Organization of information about construction works — Information management using build-ing information modelling — Part 1: Concepts and principles

ISO/CD 19650-2

Organization of information about construction works — Information management using build-ing information modelling — Part 2: Delivery phase of assets

TC 67 Materials, equipment and offshore structures for petroleum, petrochemi-cal and natural gas industries

ISO/DTS 35105

Petroleum and natural gas industries — Arctic operations — Material requirements for arctic operations

TC 68 Financial services

ISO/CD 21188 Public key infrastructure for financial services — Practices and policy framework

TC 84 Devices for administration of medicinal products and catheters

ISO/CD 23907 Sharps injury protection — Requirements and test methods — Sharps containers

TC 85 Nuclear energy, nuclear technologies, and radiological protection

2 ISO Update, Supplement to ISO Focus -- September 2016

ISO/CD 11929-1

Determination of the characteristic limits (deci-sion threshold, detection limit and limits of the coverage interval) for measurements of ionizing radiation — Fundamentals and application — Part 1: Elementary applications

ISO/CD 11929-2

Determination of the characteristic limits (deci-sion threshold, detection limit and limits of the coverage interval) for measurements of ionizing radiation — Fundamentals and application — Part 2: Advanced applications

ISO/CD 11929-3

Determination of the characteristic limits (deci-sion threshold, detection limit and limits of the coverage interval) for measurements of ionizing radiation — Fundamentals and application — Part 3: Applications to unfolding methods

TC 92 Fire safety

ISO/CD 21843 Determination of the resistance to hydrocar-bon pool fires of fire protection materials and systems for pressure vessels

ISO/DTR 16576

Fire safety engineering — Example of fire safety objectives and functional requirements for non-industrial buildings

TC 94 Personal safety -- Protective clothing and equipment

ISO/CD 11999-10

PPE for firefighters — Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures — Part 10:

TC 106 Dentistry

ISO/CD 10477 Dentistry — Polymer-based crown and bridge materials

TC 107 Metallic and other inorganic coatings

ISO/CD 17836 Thermal spraying — Determination of the deposition efficiency for thermal spraying

TC 108 Mechanical vibration, shock and condi-tion monitoring

ISO 10816-8:2014/CD Amd 1

Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 8: Reciprocating compressor systems — Amendment 1

TC 121 Anaesthetic and respiratory equipment

IEC/CD 60601-2-26

Medical electrical equipment — Part 2-26: Particular requirements for the ba-sic safety and essential performance of electroencephalographs

TC 134 Fertilizers and soil conditioners

ISO/CD 20917 Determination of Available Phosphorous and Soluble Potassium Extracted with Neutral Am-monium Citrate and Quantified by ICP-OES

TC 137 Footwear sizing designations and marking systems

ISO/CD 9407 Shoe sizes — Mondopoint system of sizing and marking

TC 146 Air quality

ISO/CD 24095 Workplace air — Minimum requirements for the measurement of respirable crystalline silica

TC 159 Ergonomics

ISO/CD 21056 Ergonomics — Accessible design — Guidelines for designing tactile symbols and letters

ISO/CD 24507 Ergonomics — Accessible design — Doors and handles of consumer products

TC 163 Thermal performance and energy use in the built environment

ISO/CD 6781-1 Performance of buildings — Detection of heat, air and moisture irregularities in buildings by in-frared methods — Part 1: General Procedures

ISO/CD 6781-2 Performance of buildings — Detection of heat, air and moisture irregularities in build-ings by infrared methods — Part 2: Equipment Requirements

TC 173 Assistive products for persons with disability

ISO/CD 20342 Assistive products for tissue integrity when lying down

ISO/CD 10542-1

Technical systems and aids for disabled or handicapped persons — Wheelchair tiedown and occupant-restraint systems — Part 1: Re-quirements and test methods for all systems

TC 176 Quality management and quality assurance

ISO/CD 9004 Managing for the sustained success of an or-ganization — A quality management approach

ISO/CD 10005 Quality management systems — Guidelines for quality plans

TC 184 Automation systems and integration

ISO/CD 10303-57

Industrial automation systems and integration — Product data representation and exchange — Part 57: Integrated generic resource: Per-sistent identification of elements in procedural shape modelling

ISO/CD 10303-242

Industrial automation systems and integration — Product data representation and exchange — Part 242: Application protocol: Managed model-based 3D engineering

TC 189 Ceramic tile

ISO/CD 10545-4

Ceramic tiles — Part 4: Determination of modulus of rupture and breaking strength

TC 190 Soil quality

ISO/CD 11260 Soil quality — Determination of effective cation exchange capacity and base saturation level using barium chloride solution

ISO/CD 14254 Soil quality — Determination of exchangeable acidity in barium chloride extracts

TC 204 Intelligent transport systems

ISO/DTR 18317

Intelligent transport systems — Pre-emption of ITS communication networks for disaster relief and emergency communications

TC 207 Environmental management

ISO/DTR 14073

Environmental management — Water footprint — Illustrative examples on how to apply ISO 14046

TC 211 Geographic information/Geomatics

ISO/CD 19159-3

Geographic information — Calibration and validation of remote sensing imagery sensors and data — Part 3: SAR/InSAR

TC 229 Nanotechnologies

ISO/DTR 18401

Nanotechnologies — Plain language explana-tion of selected terms from the ISO/IEC 80004 vocabulary series

ISO/DTR 19057

Nanotechnologies — Use and application of cellular in vitro tests and methodologies to as-sess nanomaterial biodurability

ISO/DTR 19601

Nanotechnologies — Nano-object aerosol generators for inhalation toxicity studies

ISO/DTS 20477

Nanotechnologies — Standard terms and their definition for cellulose nanomaterial

TC 249 Traditional chinese medicine

ISO/CD 20759 Traditional Chinese medicine — Artemisiae argyi folium

TC 262 Risk management

IEC/CD 31010 Risk management — Risk assessment techniques


TC 264 Fireworks

ISO/CD TR 21865

Third party testing — Voluntary scheme

TC 265 Carbon dioxide capture, transportation, and geological storage

ISO/DTR 27918

Lifecycle risk management for integrated CCS projects

TC 267 Facilities management

ISO/DTR 41013

Facilities management — Scope, key concepts and benefits

TC 268 Sustainable cities and communities

ISO/CD 37106 Sustainable development in communities — Guide to establishing strategies for smart cities and communities

TC 281 Fine Bubble Technology

ISO/CD 20480-2

Fine bubble technology - General principles for usage and measurement of fine bubbles — Part 2: General principles

TC 282 Water reuse

ISO/CD 20419 Irrigation — Irrigation Equipment Adaptation to Treated Wastewater

JTC 1 Information technology

ISO/IEC PDTR 20547-2

Information technology — Big data reference architecture — Part 2: Use cases and derived requirements

ISO/IEC CD 15909-1

Systems and software engineering — High-level Petri nets — Part 1: Concepts, definitions and graphical notation


Systems and software engineering — Life cycle management — Part 2: Guidelines to the application of ISO/IEC 15288 (System life cycle processes)

ISO/IEC CD 24773-1

Software and Systems Engineering — Certifi-cation of Software and Systems Engineering Professionals — Part 1: General Requirements

ISO/IEC CD 19774-1

Information technology — Computer graphics and image processing — Humanoid Animation (H-Anim) — Part 1: Architecture

ISO/IEC CD 19774-2

Information technology — Computer graphics and image processing — Humanoid Animation (H-Anim) — Part 2: Motion capture

ISO/IEC PDTR 15446

Information technology — Security techniques — Guide for the production of Protection Profiles and Security Targets


Information technology — MPEG video tech-nologies — Part 6: Tools for reconfigurable media coding implementations

ISO/IEC 23008-1/PDAM 2

Information technology — High efficiency coding and media delivery in heterogeneous environments — Part 1: MPEG media transport (MMT) — Amendment 2: MMT Enhancements for mobile environments

ISO/IEC PDTR 24741

Information technology — Biometrics tutorial

DIS circulated


These documents have obtained substantial support within the ap-propriate ISO technical committee.

They have been submitted to the ISO member bodies for voting by the date shown.

* Available in English only

Vote terminates

PC 277 Sustainable procurement

ISO/DIS 20400.2

* Sustainable procurement— Guidance

2016-10-13

TC 4 Rolling bearings

ISO/DIS 15 * Rolling bearings — Radial bear-ings — Boundary dimensions,general plan 2016-11-15

(Revision of ISO 15:2011)

ISO/DIS 20056-1

* Rolling bearings — Load ratingsfor hybrid bearings with rollingelements made of ceramic —Part 1: Dynamic load ratings

2016-11-02

TC 8 Ships and marine technology

IEC/IEEE DIS 80005-3

* Utility connections in port — Part3: Low Voltage Shore Connec-tion (LVSC) Systems — Generalrequirements

2016-10-21

(Revision of IEC/PAS80005-3:2014)


ISO/DIS 19683 * Space systems — Design quali-fication and acceptance tests of small spacecraft and units 2016-11-16

TC 22 Road vehicles

ISO/DIS 20077-1

* Road Vehicles — Extended vehi-cle (ExVe) methodology— Part 1: General information 2016-11-08

TC 24 Particle characterization including sieving

ISO 9276-4:2001/DAmd 1

* Representation of results ofparticle size analysis — Part 4:Characterization of a classifica-tion process — Amendment 1: .

2016-10-27

TC 25 Cast irons and pig irons

ISO/DIS 945-1 * Microstructure of cast irons — Part 1: Graphite classification by visual analysis 2016-10-26

(Revision of ISO 945-1:2008, ISO 945-1:2008/Cor 1:2010)

TC 29 Small tools

ISO/DIS 4229.2

Assembly tools for screws and nuts — Single-head engineer's wrenches for lower torque ap-plications — Maximum outside dimensions of heads and test torques

2016-10-07


TC 34 Food products

ISO/DIS 19020 * Microbiology of food chain — Horizontal method for the immunoenzymatic detection of staphylococcal enterotoxins in foodstuffs

2016-11-09


ISO/DIS 20976-1

* Microbiology of the food chain — Guidelines for conducting challenge tests of food and feed products — Part 1: Challenge tests to study the growth poten-tial, lag time and the maximum growth rate

2016-11-02

ISO/DIS 2451 * Cocoa beans — Specification and quality requirements

2016-10-31

(Revision of ISO 1114:1977, ISO 2291:1980, ISO 2451:2014)


ISO/DIS 6270-1

* Paints and varnishes — Determi-nation of resistance to humidity — Part 1: Condensation (single-sided exposure)

2016-11-03

(Revision of ISO 6270-1:1998)

ISO/DIS 6270-2

* Paints and varnishes — De-termination of resistance to humidity — Part 2: Condensation (in-cabinet exposure)

2016-11-03


TC 38 Textiles

ISO/DIS 3175-1

* Textiles — Professional care, drycleaning and wetcleaning of fabrics and garments — Part 1: Assessment of performance after cleaning and finishing

2016-11-21


ISO/DIS 3175-2

* Textiles — Professional care, drycleaning and wetcleaning of fabrics and garments — Part 2: Procedure for testing perfor-mance when cleaning and finish-ing using tetrachloroethene

2016-11-21


ISO/DIS 3175-3

* Textiles — Professional care, drycleaning and wetcleaning of fabrics and garments — Part 3: Procedure for testing perfor-mance when cleaning and finish-ing using hydrocarbon solvents

2016-11-21


TC 39 Machine tools

ISO/DIS 19085-6

* Woodworking machines — Safety — Part 6: Single spindle vertical moulding machines ("toupies")

2016-11-16

ISO/DIS 19085-8

* Woodworking machines — Safe-ty — Part 8: Wide-belt calibrat-ing and sanding machines

2016-10-26

TC 44 Welding and allied processes

ISO/DIS 3821 * Gas welding equipment — Rub-ber hoses for welding, cutting and allied processes

2016-11-17


ISO/DIS 14114 * Gas welding equipment — Acetylene manifold systems for welding, cutting and allied pro-cesses — General requirements

2016-11-17


ISO/DIS 15012-3

* Health and safety in welding and allied processes — Require-ments, testing and marking of equipment for air filtration — Part 3: Determination of the capture efficiency of on-torch welding fume extraction devices

2016-10-25

ISO/DIS 15612 * Specification and qualification of welding procedures for metal-lic materials — Qualification by adoption of a standard welding procedure specification

2016-10-31



ISO/DIS 1436 * Rubber hoses and hose assemblies — Wire-braid-reinforced hydraulic types for oil-based or water-based fluids — Specification

2016-10-26

(Revision of ISO 1436:2009, ISO 1436:2009/Cor 1:2010)

ISO/DIS 3862 * Rubber hoses and hose assem-blies — Rubber-covered spiral-wire-reinforced hydraulic types for oil-based or water-based fluids — Specification

2016-10-26


ISO/DIS 4079 * Rubber hoses and hose as-semblies — Textile-reinforced hydraulic types for oil-based or water-based fluids — Specification

2016-10-26


ISO/DIS 9298 * Rubber compounding ingre-dients — Zinc oxide — Test methods

2016-10-27


ISO/DIS 20299-2

* Film for wrapping rubber bales — Part 2: Natural rubber

(Revision of ISO 20299-2:2006, ISO/WD 19245)

ISO/DIS 1419 * Rubber- or plastics-coated fab-rics — Accelerated-ageing tests

2016-11-15


ISO/DIS 1856 * Flexible cellular polymeric materials — Determination of compression set

2016-11-08

(Revision of ISO 1856:2000, ISO 1856:2000/Amd 1:2007)

TC 58 Gas cylinders

ISO/DIS 20475 * Gas cylinders — Cylinder bun-dles — Periodic inspection and testing

2016-11-04

TC 59 Buildings and civil engi-neering works

ISO/DIS 15686-5.2

* Buildings and constructed as-sets — Service-life planning — Part 5: Life-cycle costing

2016-10-05


TC 61 Plastics

ISO/DIS 877-1 * Plastics — Methods of expo-sure to solar radiation — Part 1: General guidance

2016-10-26



ISO/DIS 877-2 * Plastics — Methods of expo-sure to solar radiation — Part 2: Direct weathering and exposure behind window glass

2016-10-26


ISO/DIS 877-3 * Plastics — Methods of expo-sure to solar radiation — Part 3: Intensified weathering using concentrated solar radiation

2016-10-26


TC 67 Materials, equipment and offshore structures for pe-troleum, petrochemical and natural gas industries

ISO/DIS 18647.2

* Petroleum and natural gas indus-tries — Modular drilling rigs for offshore fixed platforms

2016-10-21

TC 85 Nuclear energy, nuclear technologies, and radio-logical protection

ISO/DIS 12800 * Nuclear fuel technology — Guide to the measurement of the specific surface area of uranium oxide powders by the BET method

2016-10-26


TC 92 Fire safety

ISO/DIS 17755-2

* Fire safety — Statistical data collection — Part 2: Definition of terms

2016-10-31

TC 94 Personal safety -- Pro-tective clothing and equipment

ISO/DIS 19918 * Protective clothing — Protection against chemicals — Measure-ment of cumulative permeation of chemicals with low vapour pressure through materials

2016-11-08

ISO/DIS 27065.3

* Protective clothing — Perfor-mance requirements for protec-tive clothing worn by operators applying pesticides and for re-entry workers

2016-10-11


TC 96 Cranes

ISO/DIS 9927-5

* Cranes — Inspections — Part 5: Bridge and gantry cranes, including portal and semi-portal cranes and their supporting structures

2016-11-01


ISO/DIS 9170-1

* Terminal units for medical gas pipeline systems — Part 1: Terminal units for use with compressed medical gases and vacuum

2016-11-02


TC 126 Tobacco and tobacco products

ISO/DIS 22634-2

* Cigarettes — Determination of benzo[a]pyrene in cigarette mainstream smoke using GC/MS — Part 2: Method using cy-clohexane as extraction solvent

2016-11-22


TC 127 Earth-moving machinery

ISO/DIS 19014-1

* Earth-moving machinery — Safety — Part 1: Methodology to determine safety-related parts of the control system and perfor-mance requirements

2016-11-18

ISO/DIS 19014-3

* Earth-moving machinery — Safety — Part 3: Environmental performance and test require-ments of electronic and electrical components used in safety-relat-ed parts of the control system

2016-11-18

TC 130 Graphic technology

ISO/DIS 20654 * Graphic technology — Measure-ment and calculation of spot colour tone value

2016-11-22

TC 135 Non-destructive testing

ISO/DIS 20485 * Non-destructive testing — Leak testing — Tracer gas method

2016-11-22

ISO/DIS 20486 * Non-destructive testing — Leak testing — Calibration of refer-ence leaks for gases

2016-11-22

TC 138 Plastics pipes, fittings and valves for the transport of fluids

ISO/DIS 11413 * Plastics pipes and fittings — Preparation of test piece as-semblies between a polyethylene (PE) pipe and an electrofusion fitting

2016-11-16


TC 142 Cleaning equipment for air and other gases

ISO/DIS 29464 * Cleaning of air and other gases — Terminology

2016-10-31


TC 146 Air quality

ISO/DIS 19087 * Workplace air — Analysis of respirable crystalline silica by Fourier-Transform Infrared spectroscopy

2016-11-14

TC 155 Nickel and nickel alloys

ISO/DIS 6283 * Refined nickel

2016-11-15


TC 171 Document management applications

ISO/DIS 24517-2

* Document management — Engineering document format using PDF — Part 2: Use of ISO 32000-2 including support for long-term preservation (PDF/E-2)

2016-11-03

TC 172 Optics and photonics

ISO/DIS 14135-2

* Optics and photonics — Speci-fications for telescopic sights — Part 2: High-performance instruments

2016-11-18


ISO/DIS 10936-1

* Optics and photonics — Op-eration microscopes — Part 1: Requirements and test methods

2016-11-03



TC 184 Automation systems and integration

ISO/DIS 18828-3

* Industrial automation systems and integration — Standard-ized procedures for production systems engineering — Part 3: Information flows in production planning processes

2016-11-21

TC 205 Building environment design

ISO/DIS 17800 * Facility smart grid information model

2016-11-08

TC 206 Fine ceramics

ISO/DIS 19674 * Fine ceramics (advanced ceramics, advanced technical ceramics) — Methods of test for ceramic coatings — Determina-tion of internal stress in ceramic coatings by application of the Stoney formula

2016-11-16

TC 215 Health informatics

ISO/DIS 11615 * Health informatics — Identifica-tion of medicinal products — Data elements and structures for the unique identification and exchange of regulated medicinal product information

2016-11-01


ISO/DIS 11616 * Health informatics — Identifica-tion of Medicinal Products — Data elements and structures for unique identification and exchange of regulated pharma-ceutical product information

2016-11-01


TC 219 Floor coverings

ISO/DIS 19322.2

* Resilient floor coverings — Specification for floor cover-ings based on thermoplastic polymers

2016-10-05

TC 265 Carbon dioxide capture, transportation, and geo-logical storage

ISO/DIS 27917-1

* Carbon dioxide capture, trans-portation and geological storage — Vocabulary — Part 1: Cross-cutting terms

2016-10-25

CASCO Committee on conformity assessment

ISO/IEC DIS 17011

* Conformity assessment — Requirements for accreditation bodies accrediting conformity assessment bodies

2016-11-17

(Revision of ISO/IEC 17011:2004)


ISO/IEC DIS 10646

* Information technology — Uni-versal Coded Character Set (UCS)

2016-10-26

(Revision of ISO/IEC 10646:2014, ISO/IEC 10646:2014/Amd 1:2015)

ISO/IEC DIS 20246

* Software and Systems Engineer-ing — Work Product Reviews

2016-11-01

ISO/IEC DIS 10116.2

* Information technology — Secu-rity techniques — Modes of op-eration for an n-bit block cipher

2016-10-20

(Revision of ISO/IEC 10116:2006, ISO/IEC 10116:2006/Cor 1:2008)

ISO/IEC 13818-1:2015/DAmd 8

* Information technology — Ge-neric coding of moving pic-tures and associated audio information — Part 1: Systems — Amendment 8: Signaling HDR and WCG video content in MPEG-2 systems

2016-11-22

ISO/IEC DIS 14496-33.2

Information technology — Cod-ing of audio-visual objects — Part 33: Internet video coding

2016-10-25

ISO/IEC DIS 18477-4

* Information technology — Scal-able compression and coding of continuous-tone still images — Part 4: Conformance testing

2016-11-22

ISO/IEC DIS 18047-6

* Information technology — Radio frequency identification device conformance test methods — Part 6: Test methods for air interface communications at 860 MHz to 960 MHz

2016-10-28

(Revision of ISO/IEC 18047-6:2012)

ISO/IEC DIS 19794-15

* Information technology — Bio-metric data interchange format — Part 15: Palm crease image data

2016-11-08

ISO/IEC DIS 29794-4

* Information technology — Bio-metric sample quality — Part 4: Finger image data

2016-11-22

(Revision of ISO/IEC TR 29794-4:2010)

FDIS circulated


These Final draft International Standards have been submitted to the ISO member bodies for formal approval by the date shown


Vote terminates

IIW International Institute of Welding

ISO/FDIS 19675

* Non-destructive testing — Ul-trasonic testing — Specification for a calibration block for phased array testing (PAUT)

2016-09-29

TC 6 Paper, board and pulps

ISO/FDIS 18522

* Paper and board — Automated off-line testing of physical prop-erties for CD (cross direction) profiles

2016-09-30


ISO/FDIS 12625-4

* Tissue paper and tissue prod-ucts — Part 4: Determination of tensile strength, stretch at maxi-mum force and tensile energy absorption

2016-10-20


ISO/FDIS 12625-5

* Tissue paper and tissue prod-ucts — Part 5: Determination of wet tensile strength

2016-10-20


ISO/FDIS 12625-6

* Tissue paper and tissue prod-ucts — Part 6: Determination of grammage

2016-10-20


TC 10 Technical product documentation

ISO/FDIS 12757-1

* Ball point pens and refills — Part 1: General use

2016-10-11


ISO/FDIS 13715

* Technical product documenta-tion — Edges of undefined shape — Indication and dimensioning

2016-10-20



ISO/FDIS 8575 * Aerospace — Fluid systems — Hydraulic system tubing

2016-10-18


ISO/FDIS 17666

* Space systems — Risk management

2016-10-06


ISO/FDIS 18257

* Space systems — Semicon-ductor integrated circuits for space applications — Design requirements

2016-10-07

TC 22 Road vehicles

ISO/FDIS 17987-7

* Road vehicles — Local Intercon-nect Network (LIN) — Part 7: Electrical Physical Layer (EPL) conformance test specification

2016-10-25

TC 27 Solid mineral fuels

ISO/FDIS 622 * Solid mineral fuels — Determi-nation of phorphorus content — Reduced molybdophosphate photometric method

2016-10-18


ISO/FDIS 11723

* Solid mineral fuels — Determi-nation of arsenic and selenium — Eschka's mixture and hydride generation method

2016-10-04


ISO/FDIS 11724

* Solid mineral fuels — Determina-tion of total fluorine in coal, coke and fly ash

2016-10-18


ISO/FDIS 15237

* Solid mineral fuels — Determina-tion of total mercury content of coal

2016-10-18


ISO/FDIS 15238

* Solid mineral fuels — Determina-tion of total cadmium content of coal

2016-10-20


TC 34 Food products

ISO 5492:2008/FDAmd 1

* Sensory analysis — Vocabulary — Amendment 1

2016-09-30


ISO/FDIS 20567-1

* Paints and varnishes — Determi-nation of stone-chip resistance of coatings — Part 1: Multi-impact testing

2016-10-04


ISO/FDIS 20567-2

* Paints and varnishes — Determi-nation of stone-chip resistance of coatings — Part 2: Single-impact test with a guided impact body

2016-10-04


TC 37 Terminology and other language and content resources

ISO/FDIS 2603 * Simultaneous interpret-ing — Permanent booths — Requirements

2016-10-11


ISO/FDIS 4043 * Simultaneous interpreting — Mo-bile booths — Requirements

2016-10-11


ISO/FDIS 20109

* Simultaneous interpreting — Equipment — Requirements

2016-10-11

TC 38 Textiles

ISO/FDIS 12947-2

* Textiles — Determination of the abrasion resistance of fabrics by the Martindale method — Part 2: Determination of specimen breakdown

2016-10-20


TC 39 Machine tools

ISO/FDIS 16093

* Machine tools — Safety — Saw-ing machines for cold metal

2016-10-20

TC 43 Acoustics

ISO/FDIS 10140-4

* Acoustics — Laboratory meas-urement of sound insulation of building elements — Part 4: Measurement procedures and requirements

2016-10-06



ISO/FDIS 17635

* Non-destructive testing of welds — General rules for metallic materials

2016-10-06


TC 58 Gas cylinders


ISO 11114-1:2012/FDAmd 1

* Gas cylinders — Compatibility of cylinder and valve materials with gas contents — Part 1: Metallic materials — Amendment 1

2016-10-13

TC 61 Plastics

ISO/FDIS 177 * Plastics — Determination of migration of plasticizers

2016-10-21


TC 70 Internal combustion engines

ISO/FDIS 15550

* Internal combustion engines — Determination and method for the measurement of engine power — General requirements

2016-09-28


TC 76 Transfusion, infusion and injection, and blood processing equipment for medical and pharmaceuti-cal use

ISO/FDIS 11418-1

* Containers and accessories for pharmaceutical preparations — Part 1: Drop-dispensing glass bottles

2016-10-14


ISO/FDIS 11418-2

* Containers and accessories for pharmaceutical preparations — Part 2: Screw-neck glass bottles for syrups

2016-10-14


ISO/FDIS 11418-3

* Containers and accessories for pharmaceutical preparations — Part 3: Screw-neck glass bottles (veral) for solid and liquid dosage forms

2016-10-14


TC 83 Sports and other rec-reational facilities and equipment

ISO/FDIS 20957-4

* Stationary training equipment — Part 4: Strength training benches, additional specific safety requirements and test methods

2016-10-06


ISO/FDIS 20957-5

* Stationary training equipment — Part 5: Stationary exercise bicycles and upper body crank training equipment, additonal specific safety requirements and test methods

2016-10-06


TC 92 Fire safety

ISO/FDIS 12828-2

* Validation methods for fire gas analyses — Part 2: Intralabora-tory validation of quantification methods

2016-10-18

TC 94 Personal safety -- Pro-tective clothing and equipment

ISO/FDIS 9151 * Protective clothing against heat and flame — Determination of heat transmission on exposure to flame

2016-10-05


ISO/FDIS 15025

* Protective clothing — Protection against flame — Method of test for limited flame spread

2016-10-20


ISO/FDIS 17493

* Clothing and equipment for protection against heat — Test method for convective heat re-sistance using a hot air circulat-ing oven

2016-10-25


TC 108 Mechanical vibration, shock and condition monitoring

ISO/FDIS 8608 * Mechanical vibration — Road surface profiles — Reporting of measured data

2016-10-14


ISO/FDIS 20816-1

* Mechanical vibration — Meas-urement and evaluation of ma-chine vibration — Part 1: General guidelines

2016-10-14

(Revision of ISO 7919-1:1996, ISO 10816-1:1995, ISO 10816-1:1995/Amd 1:2009)

ISO/FDIS 21940-11

* Mechanical vibration — Rotor balancing — Part 11: Procedures and tolerances for rotors with rigid behaviour

2016-10-13


TC 110 Industrial trucks

ISO/FDIS 3691-3

* Industrial trucks — Safety requirements and verification — Part 3: Additional requirements for trucks with elevating operator position and trucks specifically designed to travel with elevated loads

2016-10-23


TC 131 Fluid power systems

ISO/FDIS 9974-4

* Connections for general use and fluid power — Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing — Part 4: Dimensions, design, test methods and re-quirements for external hex and internal hex port plugs

2016-10-25


TC 138 Plastics pipes, fittings and valves for the transport of fluids

ISO/FDIS 10639

* Plastics piping systems for pressure and non-pressure water supply — Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin

2016-10-25


TC 146 Air quality

ISO/FDIS 20581

* Workplace air — General re-quirements for the performance of procedures for the measure-ment of chemical agents

2016-09-29

TC 150 Implants for surgery

ISO/FDIS 7199 * Cardiovascular implants and artificial organs — Blood-gas exchangers (oxygenators)

2016-10-05



TC 163 Thermal performance and energy use in the built environment

ISO/FDIS 18523-1

* Energy performance of buildings — Schedule and condition of building, zone and room usage for energy calculation — Part 1: Non-residential buildings

2016-10-06

TC 164 Mechanical testing of metals

ISO/FDIS 12135

* Metallic materials — Unified method of test for the determi-nation of quasistatic fracture toughness

2016-10-09

(Revision of ISO 12135:2002, ISO 12135:2002/Cor 1:2008)

TC 172 Optics and photonics

ISO/FDIS 14490-7

* Optics and photonics — Test methods for telescopic systems — Part 7: Test methods for limit of resolution

2016-10-04


TC 189 Ceramic tile

ISO/FDIS 10545-13

* Ceramic tiles — Part 13: Deter-mination of chemical resistance


TC 194 Biological and clinical eval-uation of medical devices

ISO/FDIS 10993-6

* Biological evaluation of medical devices — Part 6: Tests for local effects after implantation

2016-10-03



ISO/FDIS 19603

* Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for determining elastic modulus and bending strength of thick ceramic coatings

2016-10-05


ISO/FDIS 14034

* Environmental management — Environmental technology verification (ETV)

2016-10-06

(Revision of ISO/NP 18634)

TC 213 Dimensional and geometri-cal product specifications and verification

ISO/FDIS 16610-28

* Geometrical product specifica-tions (GPS) — Filtration — Part 28: Profile filters: End effects

2016-10-18

(Revision of ISO/TS 16610-28:2010)

TC 224 Service activities relating to drinking water supply systems and wastewater systems - Quality criteria of the service and perfor-mance indicators

ISO/FDIS 24516-1

* Guidelines for the management of assets of water supply and wastewater systems — Part 1: Drinking water distribution networks

2016-10-20

TC 238 Solid biofuels

ISO/FDIS 18134-2

* Solid biofuels — Determination of moisture content — Oven dry method — Part 2: Total moisture — Simplified method

2016-11-19



ISO/IEC/IEEE FDIS 15289

* Systems and software engineer-ing — Content of life-cycle infor-mation items (documentation)

2016-10-14

(Revision of ISO/IEC/IEEE 15289:2015)

ISO/IEC/IEEE FDIS 15939

* Systems and software engineer-ing — Measurement process

2016-10-14


ISO/IEC FDIS 27004

* Information technology — Se-curity techniques — Information security management — Moni-toring, measurement, analysis and evaluation

2016-10-13


ISO/IEC FDIS 27050-1

* Information technology — Se-curity techniques — Electronic discovery — Part 1: Overview and concepts

2016-09-29


* Information technology — IT Enabled Services-Business Process Outsourcing (ITES-BPO) lifecycle processes — Part 1: Process reference model (PRM)

2016-10-01


* Information technology — IT Enabled Services-Business Process Outsourcing (ITES-BPO) lifecycle processes — Part 2: Process assessment model (PAM)

2016-10-01


* Information technology — IT Enabled Services-Business Process Outsourcing (ITES-BPO) lifecycle processes — Part 3: Measurement framework (MF) and organizational maturity model (OMM)

2016-10-01


* Information technology — IT Enabled Services-Business Process Outsourcing (ITES-BPO) lifecycle processes — Part 4: Terms and concepts

2016-10-01


* Information technology — IT Enabled Services-Business Process Outsourcing (ITES-BPO) lifecycle processes — Part 5: Guidelines

2016-10-01

Standards published

New International Standards published between 01 August and 31 August 2016



** French version of standard previously published in English only

Price

group

TC 1 Screw threads

ISO 2901:2016 ISO metric trapezoidal screw threads — Basic and design profiles

A

ISO 2902:2016 ISO metric trapezoidal screw threads — General plan

A

ISO 2903:2016 ISO metric trapezoidal screw threads — Tolerances

C

TC 6 Paper, board and pulps

ISO 9197:2016 * Paper, board and pulps — Determina-tion of water-soluble chlorides

B

ISO 11476:2016

Paper and board — Determination of CIE whiteness, C/2° (indoor illumina-tion conditions)

C

TC 10 Technical product documentation

ISO 15787:2016

Technical product documentation — Heat-treated ferrous parts — Presenta-tion and indications

E

TC 17 Steel

ISO 13976:2016

* Hot-rolled steel sheet in coils of struc-tural quality and heavy thickness

B

ISO 14590:2016

* Cold-reduced steel sheet of high ten-sile strength and low yield point with improved formability

B


ISO 8168:2016 * Aerospace — Bolts, with MJ threads, made of heat and corrosion resisting steel, strength class 1 100 MPa — Pro-curement specification

D

ISO 20683-1:2016

* Aircraft ground equipment — Nose gear towbarless towing vehicle (TLTV) — Design, testing and maintenance re-quirements — Part 1: Main line aircraft

D

ISO 20683-2:2016

* Aircraft ground equipment — Design, testing and maintenance requirements for nose gear towbarless towing vehi-cle (TLTV) — Part 2: Regional aircraft

C

TC 22 Road vehicles

ISO 14230-2:2016

* Road vehicles — Diagnostic commu-nication over K-Line (DoK-Line) — Part 2: Data link layer

F

ISO 17987-1:2016

* Road vehicles — Local Interconnect Network (LIN) — Part 1: General infor-mation and use case definition

B

ISO 17987-2:2016

* Road vehicles — Local Interconnect Network (LIN) — Part 2: Transport pro-tocol and network layer services

G

ISO 17987-3:2016

* Road vehicles — Local Interconnect Network (LIN) — Part 3: Protocol specification

F

ISO 17987-4:2016

* Road vehicles — Local Interconnect Network (LIN) — Part 4: Electrical physical layer (EPL) specification 12 V/24 V

E

ISO 11452-3:2016

* Road vehicles — Component test methods for electrical disturbances from narrowband radiated electro-magnetic energy — Part 3: Transverse electromagnetic (TEM) cell

D

ISO 12619-4:2016

* Road vehicles — Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components — Part 4: Check valve

A

ISO 12619-5:2016

* Road vehicles — Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components — Part 5: Manual cylinder valve

A

TC 23 Tractors and machinery for agri-culture and forestry

ISO 3767-1:2016

Tractors, machinery for agriculture and forestry, powered lawn and garden equipment — Symbols for operator controls and other displays — Part 1: Common symbols

H

ISO 3767-2:2016

* Tractors, machinery for agriculture and forestry, powered lawn and garden equipment — Symbols for operator controls and other displays — Part 2: Symbols for agricultural tractors and machinery

G

ISO 3767-3:2016

Tractors, machinery for agriculture and forestry, powered lawn and garden equipment — Symbols for operator controls and other displays — Part 3: Symbols for powered lawn and garden equipment

C

ISO 3767-4:2016

Tractors, machinery for agriculture and forestry, powered lawn and garden equipment — Symbols for operator controls and other displays — Part 4: Symbols for forestry machinery

E

ISO 3767-5:2016

Tractors, machinery for agriculture and forestry, powered lawn and garden equipment — Symbols for operator controls and other displays — Part 5: Symbols for manual portable forestry machines

A

ISO 13693-1:2013

Irrigation equipment — Safety devices for chemigation — Part 1: Small plas-tics valves for chemigation

D

ISO 15886-3:2012/Amd 1:2016

* Agricultural irrigation equipment — Sprinklers — Part 3: Characterization of distribution and test methods — Amendment 1

XZ

TC 29 Small tools

ISO 10897:2016

Collets for tool holders with taper ratio 1:10 — Collets, holders, nuts

B

ISO 866:2016 Centre drills for centre holes without protecting chamfers — Type A

A


TC 31 Tyres, rims and valves

ISO 18106:2016

Passenger car, commercial vehicle, truck and bus tyres — Methods for measuring snow grip performance — Loaded new tyres

D

TC 34 Food products

ISO 11816-2:2016

Milk and milk products — Determina-tion of alkaline phosphatase activity — Part 2: Fluorimetric method for cheese

C

ISO 22004:2014

* Food safety management systems — Guidance on the application of ISO 22000

E

TC 39 Machine tools

ISO 3070-2:2016

Machine tools — Test conditions for testing the accuracy of boring and mill-ing machines with horizontal spindle — Part 2: Machines with movable column along the X-axis (floor type)

G

TC 43 Acoustics

ISO 10140-1:2016

Acoustics — Laboratory measurement of sound insulation of building ele-ments — Part 1: Application rules for specific products

G


ISO 10656:2016

Resistance welding equipment — Transformers — Integrated transform-ers for welding guns

B

ISO 15618-1:2016

Qualification testing of welders for un-derwater welding — Part 1: Hyperbaric wet welding

D

TC 54 Essential oils

ISO 13171:2016

Essential oil of oregano [Origanum vulgare L. subsp. hirtum (Link) letsw]

B

TC 60 Gears

ISO 6336-5:2016

* Calculation of load capacity of spur and helical gears — Part 5: Strength and quality of materials

F

TC 61 Plastics

ISO 18830:2016

* Plastics — Determination of aerobic biodegradation of non-floating plastic materials in a seawater/sandy sedi-ment interface — Method by meas-uring the oxygen demand in closed respirometer

B

ISO 19679:2016

* Plastics — Determination of aerobic biodegradation of non-floating plastic materials in a seawater/sediment inter-face — Method by analysis of evolved carbon dioxide

B

TC 67 Materials, equipment and off-shore structures for petroleum, petrochemical and natural gas industries

ISO 18797-1:2016

* Petroleum, petrochemical and natural gas industries — External corrosion protection of risers by coatings and linings — Part 1: Elastomeric coating systems-polychloroprene or EPDM

E

ISO 19008:2016

* Standard cost coding system for oil and gas production and processing facilities

B

ISO 21809-3:2016

Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 3: Field joint coatings

H

TC 69 Applications of statistical methods

ISO 22514-4:2016

* Statistical methods in process man-agement — Capability and perfor-mance — Part 4: Process capability estimates and performance measures

F

TC 79 Light metals and their alloys

ISO 16374:2016

* Evaluation method for cleanliness of magnesium and magnesium alloy ingots

A

TC 84 Devices for administration of medicinal products and catheters

ISO 6009:2016 Hypodermic needles for single use — Colour coding for identification

A

ISO 7864:2016 Sterile hypodermic needles for single use — Requirements and test methods

D

ISO 9626:2016 Stainless steel needle tubing for the manufacture of medical devices — Requirements and test methods

D

TC 85 Nuclear energy, nuclear tech-nologies, and radiological protection

ISO 12183:2016

* Nuclear fuel technology — Controlled-potential coulometric assay of plutonium

E

TC 96 Cranes

ISO 12480-3:2016

Cranes — Safe use — Part 3: Tower cranes

E

ISO 11031:2016

Cranes — Principles for seismically resistant design

F

TC 108 Mechanical vibration, shock and condition monitoring

ISO 16063-32:2016

* Methods for the calibration of vibra-tion and shock transducers — Part 32: Resonance testing — Testing the frequency and the phase response of accelerometers by means of shock excitation

B

TC 110 Industrial trucks

ISO 22915-7:2016

Industrial trucks — Verification of stability — Part 7: Bidirectional and multidirectional trucks

C

TC 114 Horology

IEC 60086-3:2016

* Primary batteries — Part 3: Watch batteries

F



ISO 5361:2016 Anaesthetic and respiratory equipment — Tracheal tubes and connectors

F

ISO 5364:2016 Anaesthetic and respiratory equipment — Oropharyngeal airways

C


ISO 5781:2016 Hydraulic fluid power — Pressure-reducing valves, sequence valves, unloading valves, throttle valves and check valves — Mounting surfaces

D

ISO 12829:2016

Hydraulic spin-on filters with finite lives — Method for verifying the rated fatigue life and the rated static burst pressure of the pressure-containing envelope

B

TC 133 Clothing sizing systems - size designation, size measurement methods and digital fittings

ISO 18825-2:2016

Clothing — Digital fittings — Part 2: Vocabulary and terminology used for attributes of the virtual human body

F

TC 145 Graphical symbols

ISO 28564-2:2016

* Public information guidance systems — Part 2: Guidelines for the design and use of location signs and direction signs

E

TC 147 Water quality

ISO 18635:2016

Water quality — Determination of short-chain polychlorinated alkanes (SCCPs) in sediment, sewage sludge and suspended (particulate) matter — Method using gas chromatography-mass spectrometry (GC-MS) and elec-tron capture negative ionization (ECNI)

E

ISO 13168:2015

Water quality — Simultaneous de-termination of tritium and carbon 14 activities — Test method using liquid scintillation counting

C

TC 149 Cycles

ISO 6699:2016 * Cycles — Handlebar centre and stem dimensions

A


ISO 15674:2016

* Cardiovascular implants and artificial organs — Hard-shell cardiotomy/ve-nous reservoir systems (with/without filter) and soft venous reservoir bags

B

ISO 15675:2016

* Cardiovascular implants and artificial organs — Cardiopulmonary bypass systems — Arterial blood line filters

B

ISO 15676:2016

* Cardiovascular implants and artificial organs — Requirements for single-use tubing packs for cardiopulmonary bypass and extracorporeal membrane oxygenation (ECMO)

B

ISO 18241:2016

* Cardiovascular implants and extracor-poreal systems — Cardiopulmonary bypass systems — Venous bubble traps

B

ISO 18242:2016

* Cardiovascular implants and extracor-poreal systems — Centrifugal blood pumps

B

ISO/TR 19024:2016

* Evaluation of CPB devices relative to their capabilities of reducing the trans-mission of gaseous microemboli (GME) to a patient during cardiopulmonary bypass

B

ISO 7207-2:2011/Amd 1:2016

Implants for surgery — Components for partial and total knee joint pros-theses — Part 2: Articulating surfaces made of metal, ceramic and plastics materials — Amendment 1

XZ

TC 156 Corrosion of metals and alloys

ISO/TR 16203:2016

Corrosion of metals and alloys — Guidelines for the selection of methods for particle-free erosion corrosion test-ing in flowing liquids

B

TC 159 Ergonomics

ISO/TS 21144:2016

* Ergonomics of human-system interac-tion — Electronic paper display — Indoor use

C

TC 164 Mechanical testing of metals

ISO 6508-1:2016

Metallic materials — Rockwell hard-ness test — Part 1: Test method

E

TC 182 Geotechnics

ISO 22476-15:2016

* Geotechnical investigation and testing — Field testing — Part 15: Measuring while drilling

D

TC 192 Gas turbines

ISO 19859:2016

Gas turbine applications — Require-ments for power generation

H

TC 193 Natural gas

ISO 6976:2016 * Natural gas — Calculation of calorific values, density, relative density and Wobbe indices from composition

G


ISO/TS 16460:2016

* Intelligent transport systems — Com-munications access for land mobiles (CALM) — Communication protocol messages for global usage

F

ISO/TS 21219-16:2016

* Intelligent transport systems — Traf-fic and travel information via transport protocol exports group, generation 2 (TPEG2) — Part 16: Fuel price informa-tion and availability (TPEG2-FPI)

G


ISO/TR 14073:2016

* Environmental management — Water footprint — Illustrative examples on how to apply ISO 14046

G

TC 210 Quality management and cor-responding general aspects for medical devices

ISO 80369-6:2016

Small bore connectors for liquids and gases in healthcare applications — Part 6: Connectors for neuraxial applications

F

TC 211 Geographic information/Geomatics

ISO/TS 19115-3:2016

* Geographic information — Metadata — Part 3: XML schema implementation for fundamental concepts

G


TC 213 Dimensional and geometrical product specifications and verification

ISO 1:2016 Geometrical product specifications (GPS) — Standard reference tempera-ture for the specification of geometrical and dimensional properties

A

ISO 14405-1:2016

Geometrical product specifications (GPS) — Dimensional tolerancing — Part 1: Linear sizes

G

ISO/TS 17865:2016

Geometrical product specifications (GPS) — Guidelines for the evalua-tion of coordinate measuring machine (CMM) test uncertainty for CMMs using single and multiple stylus contacting probing systems

B

TC 224 Service activities relating to drinking water supply systems and wastewater systems - Qual-ity criteria of the service and performance indicators

ISO 24521:2016

* Activities relating to drinking water and wastewater services — Guidelines for the management of basic on-site domestic wastewater services

G

TC 238 Solid biofuels

ISO 18846:2016

Solid biofuels — Determination of fines content in samples of pellets

A

ISO 18847:2016

Solid biofuels — Determination of par-ticle density of pellets and briquettes

B

TC 249 Traditional chinese medicine

ISO 18746:2016

* Traditional Chinese medicine — Sterile intradermal acupuncture needles for single use

B

TC 260 Human resource management

ISO 30400:2016

* Human resource management — Vocabulary

C

ISO 30405:2016

Human resource management — Guidelines on recruitment

D

ISO 30408:2016

Human resource management — Guidelines on human governance

C

ISO 30409:2016

* Human resource management — Workforce planning

E

TMBG Technical Management Board - groups

IWA 23:2016 * Interoperability of microfluidic devices — Guidelines for pitch spacing dimen-sions and initial device classification

B

IWA 24:2016 * Non-sewered sanitation systems — General safety and performance requirements for design and testing

H

IULTCS International Union of Leather Technologists and Chemists Societies

ISO 19076:2016

Leather — Measurement of leather surface — Using electronic techniques

C


ISO/IEC 14443-3:2016

* Identification cards — Contactless integrated circuit cards — Proxim-ity cards — Part 3: Initialization and anticollision

G

ISO/IEC 18745-2:2016

* Information technology — Test methods for machine readable travel documents (MRTD) and associated devices — Part 2: Test methods for the contactless interface

F

ISO/IEC TS 17961:2013/Cor 1:2016

* Information technology — Program-ming languages, their environments and system software interfaces — C secure coding rules — Technical Cor-rigendum 1

free

ISO/IEC TS 18661-5:2016

* Information Technology — Program-ming languages, their environments, and system software interfaces — Floating-point extensions for C — Part 5: Supplementary attributes

D

ISO/IEC 24734:2014/Cor 1:2016

* Information technology — Office equipment — Method for measuring digital printing productivity — Technical Corrigendum 1

free

ISO/IEC 23008-3:2015/Amd 2:2016

* Information technology — High ef-ficiency coding and media delivery in heterogeneous environments — Part 3: 3D audio — Amendment 2: MPEG-H 3D Audio File Format Support

XZ

ISO/IEC 15961-4:2016

* Information technology — Radio frequency identification (RFID) for item management: Data protocol — Part 4: Application interface commands for battery assist and sensor functionality

D

ISO/IEC TR 18120:2016

* Information technology — Learning, education, and training — Require-ments for e-textbooks in education

G

ISO/IEC 19794-14:2013/Amd 1:2016

* Information technology — Biometric data interchange formats — Part 14: DNA data — Amendment 1: Conform-ance testing and clarification of defects

H

Standards confirmed

The following International Standards are confimred for a five year period:

IIW International Institute of Welding

ISO 8249:2000 (reconfirmed)

ISO 14372:2011

TC 5 Ferrous metal pipes and metallic fittings

ISO 7-2:2000 (reconfirmed)



TC 17 Steel

ISO 657-1:1989

ISO 657-2:1989

ISO 657-21:1983

ISO 9034:1987




TC 21 Equipment for fire protection and fire fighting

ISO 12239:2010

ISO/TS 12854:2009

(reconfirmed)

TC 34 Food products




TC 38 Textiles

ISO 10617:2010








TC 58 Gas cylinders

ISO 11114-3:2010

ISO 13341:2010

TC 60 Gears


TC 61 Plastics







ISO 2559:2011


ISO 3342:2011

ISO 3598:2011


ISO 4604:2011

ISO 4900:2011

ISO 8516:2011






TC 67 Materials, equipment and offshore structures for petroleum, petrochemi-cal and natural gas industries

ISO 10426-1:2009





TC 82 Mining








TC 104 Freight containers

ISO 18186:2011

TC 107 Metallic and other inorganic coatings




ISO 26945:2011



TC 114 Horology

ISO 3765:1998


ISO 12151-1:2010


ISO 10041-1:2010

ISO 10041-2:2010


TC 146 Air quality


ISO 16000-10:2006

(reconfirmed)

ISO 16000-11:2006

(reconfirmed)

TC 156 Corrosion of metals and alloys







TC 162 Doors and windows





ISO 10676:2010


ISO 22197-2:2011

ISO 22197-3:2011



TC 210 Quality management and correspond-ing general aspects for medical devices

ISO 15223-2:2010


Standards withdrawn


TC 69 Applications of statistical methods

ISO/TR 22514-4:2007

(replaced by ISO 22514-4:2016)

TC 87 Cork

ISO 4707:1981 (replaced by )

TC 108 Mechanical vibration, shock and condi-tion monitoring

ISO 5347-14:1993 (replaced by ISO 16063-32:2016)


ISO/TR 16044:2004

(replaced by )


ISO/TR 14073:2016

(replaced by )


ISO/IEC TR 19769:2004

(replaced by )

Meeting calendar

(update at 01 August 2016)

Meetings called for the month of July are not in this edition.

* Information definite but meeting not yet formally convened

** Provisional

September 2016

3-14 Berlin (Germany) JTC 1/SC 17 Information technol-ogy/Cards and per-sonal identification

5 Changsha (China)

TC 96/SC 2 Cranes/Terminology

5-9 Bilbao (Spain) TC 108/SC 4 Mechanical vibration, shock and condition monitoring/Human exposure to me-chanical vibration and shock

5-9 Edinburgh (Unit-ed Kingdom)

TC 292 Security and resilience

5-10 Changsha (China)

TC 96/SC 6 Cranes/Mobile cranes

5-10 Changsha (China)

TC 96/SC 9 Cranes/Bridge and gantry cranes

5-10 Sydney (Australia)

TC 147 Water quality

9 Beijing (China) President's committee

President's committee

10 Beijing (China) TMB Technical Manage-ment Board

10-14 Redlands (USA) TC 251 Asset management

11 Beijing (China) COUNCIL Council

11 Beijing (China) DEVCO Committee on devel-oping country matters

11-16 Tromsø (Norway) TC 106/SC 1 Dentistry/Filling and restorative materials

11-16 Tromsø (Norway) TC 106/SC 2 Dentistry/Prosthodon-tic materials

11-16 Tromsø (Norway) TC 106/SC 3 Dentistry/Terminology

11-16 Tromsø (Norway) TC 106/SC 4 Dentistry/Dental instruments

11-16 Tromsø (Norway) TC 106/SC 6 Dentistry/Dental equipment

11-16 Tromsø (Norway) TC 106/SC 7 Dentistry/Oral care products

11-16 Tromsø (Norway) TC 106/SC 8 Dentistry/Dental implants

11-16 Tromsø (Norway) TC 106/SC 9 Dentistry/Dental CAD/CAM systems

11-16 San José, Cali-fornia (USA)


12-13 Beijing (China) GA General Assembly

12-13 Peterbor-ough (United Kingdom)

TC 23/SC 13 Tractors and machin-ery for agriculture and forestry/Powered lawn and garden equipment

12-13 Stavanger (Norway)

TC 67/SC 7 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Offshore structures

13 Beijing (China) CSC/FIN Council/Council Standing Committee on Finance (CSC/FIN)

13 Beijing (China) CSC/SPC Council/Strategy and Policy Committee (CSC/SPC)

13 Sao Paulo (Brazil)

TC 173/SC 7 Assistive products for persons with disabil-ity/Accessible design

13-14 Vienna (Austria) JTC 1/SC 22 Information technol-ogy/Programming languages, their envi-ronments and system software interfaces

14-15 Berlin (Germany) TC 290 Online reputation

14-16 Peterbor-ough (United Kingdom)

TC 23/SC 17 Tractors and machin-ery for agriculture and forestry/Manu-ally portable forest machinery

14-16 Sao Paulo (Brazil)

TC 173 Assistive products for persons with disability


TC 173/SC 1 Assistive products for persons with disability/Wheelchairs

15-16 Silver Spring (USA)

TC 194/SC 1 Biological and clinical evaluation of medical devices/Tissue prod-uct safety

16 Tromsø (Norway) TC 106 Dentistry

16 Silver Spring (USA)

TC 150/SC 7 Implants for surgery/Tissue-engineered medical products



TC 209 Cleanrooms and as-sociated controlled environments

19 Cartagena de In-dias (Colombia)

TC 71/SC 5 Concrete, reinforced concrete and pre-stressed concrete/Simplified design standard for concrete structures


TC 71/SC 8 Concrete, reinforced concrete and pre-stressed concrete/En-vironmental manage-ment for concrete and concrete structures

19-20 Xian (China) TC 33 Refractories

19-22 Atlanta (USA) TC 142 Cleaning equipment for air and other gases

19-23 Berlin (Germany) TC 61 Plastics




TC 150/SC 1 Implants for surgery/Materials


TC 150/SC 2 Implants for surgery/Cardiovascular im-plants and extracor-poreal systems


TC 150/SC 4 Implants for sur-gery/Bone and joint replacements


TC 150/SC 5 Implants for surgery/Osteosynthesis and spinal devices


TC 150/SC 6 Implants for surgery/Active implants

19-23 Beijing (China) TC 279 Innovation management

19-25 Melbourne (Australia)

TC 165 Timber structures

19-30 Shanghai (China) TC 213 Dimensional and geometrical product specifications and verification


TC 71/SC 3 Concrete, reinforced concrete and pre-stressed concrete/Concrete production and execution of concrete structures


TC 71/SC 4 Concrete, reinforced concrete and pre-stressed concrete/Performance require-ments for structural concrete


TC 71/SC 6 Concrete, reinforced concrete and pre-stressed concrete/Non-traditional rein-forcing materials for concrete structures

20 Milan (Italy) TC 86/SC 7 Refrigeration and air-conditioning/Test-ing and rating of com-mercial refrigerated display cabinets

20-21 Stockholm (Sweden)

TC 264 Fireworks

20-22 Yichang (China) TC 256 Pigments, dyestuffs and extenders

21 Berlin (Germany) TC 61/SC 1 Plastics/Terminology

21 Berlin (Germany) TC 61/SC 2 Plastics/Mechanical behavior

21 Berlin (Germany) TC 61/SC 5 Plastics/Physical-chemical properties

21 Berlin (Germany) TC 61/SC 10 Plastics/Cellular plastics

21 Berlin (Germany) TC 61/SC 11 Plastics/Products


TC 71/SC 1 Concrete, reinforced concrete and pre-stressed concrete/Test methods for concrete


TC 71/SC 7 Concrete, reinforced concrete and pre-stressed concrete/Maintenance and repair of concrete structures

22 Berlin (Germany) TC 61/SC 4 Plastics/Burning behaviour

22 Berlin (Germany) TC 61/SC 6 Plastics/Ageing, chemical and environ-mental resistance


TC 71 Concrete, reinforced concrete and pre-stressed concrete

22-23 Yokohama (Japan)

TC 22/SC 31 Road vehicles/Data communication

22-24 Beijing (China) TC 17/SC 1 Steel/Methods of de-termination of chemi-cal composition

23 Annapolis (USA) TC 194 Biological and clinical evaluation of medical devices

23 Barcelona (Spain)

TC 254 Safety of amusement rides and amusement devices

26 Beijing (China) TC 8/SC 6 Ships and ma-rine technology/Navigation and ship operations

26-27 Sèvres (France) TC 17/SC 11 Steel/Steel castings

26-29 Haarlem (Netherlands)

TC 157 Non-systemic con-traceptives and STI barrier prophylactics

26-30 San José, Cali-fornia (USA)

JTC 1/SC 2 Information technol-ogy/Coded character sets

26-30 Seoul (Korea, Republic of)

JTC 1/SC 34 Information tech-nology/Document description and pro-cessing languages

26-30 Beijing (China) TC 8 Ships and marine technology

26-30 Berlin (Germany) TC 163 Thermal performance and energy use in the built environment

26-30 Berlin (Germany) TC 205 Building environment design

26-30 Quebec City (Canada)

TC 218 Timber

27 Beijing (China) TC 8/SC 13 Ships and marine technology/Marine technology


27 Paris (France) TC 17/SC 20 Steel/General techni-cal delivery condi-tions, sampling and mechanical testing methods

27-29 Moscow (Rus-sian Federation)

TC 232 Learning services outside formal education

27-30 Beijing (China) TC 8/SC 3 Ships and marine technology/Piping and machinery

28 Delft (Netherlands)

TC 22/SC 41 Road vehicles/Spe-cific aspects for gase-ous fuels


TC 28/SC 2 Petroleum products and related products of synthetic or bio-logical origin/Meas-urement of petroleum and related products


TC 28/SC 5 Petroleum products and related products of synthetic or bio-logical origin/Meas-urement of refriger-ated hydrocarbon and non-petroleum based liquefied gaseous fuels

28-29 Berlin (Germany) TC 266 Biomimetics

28-30 Berlin (Germany) TC 44/SC 3 Welding and allied processes/Welding consumables


TC 28/SC 4 Petroleum products and related prod-ucts of synthetic or biological origin/Classifications and specifications


TC 28/SC 7 Petroleum products and related products of synthetic or bio-logical origin/Liquid Biofuels

29 Burlington, Ver-mont (USA)

TC 146/SC 1 Air quality/Stationary source emissions


TC 146/SC 2 Air quality/Workplace atmospheres


TC 146/SC 3 Air quality/Ambient atmospheres


TC 146/SC 4 Air quality/General aspects


TC 146/SC 6 Air quality/Indoor air

29-30 Courbevoie, Paris (France)

TC 17 Steel


TC 28 Petroleum products and related products of synthetic or bio-logical origin

30 Milan (Italy) TC 39/SC 4 Machine tools/Wood-working machines


TC 146 Air quality

October 2016

2-7 Seattle (USA) TC 184/SC 4 Automation systems and integration/Indus-trial data

2-7 Auckland (New Zealand)


3-7 Pretoria (South Africa)

PC 273 Customer contact centres

3-7 Matsue (Japan) TC 183 Copper, lead, zinc and nickel ores and concentrates

4-7 London (United Kingdom)

TC 22/SC 34 Road vehicles/Propul-sion, powertrain and powertrain fluids

5 London (United Kingdom)

TC 70/SC 7 Internal combustion engines/Tests for lubricating oil filters

5 Helsinki (Finland) TC 82/SC 7 Mining/Mine closure and reclamation management

5-6 Chicago (USA) TC 105 Steel wire ropes

5-7 Madrid (Spain) TC 225 Market, opinion and social research

5-10 Berlin (Germany) TC 59/SC 17 Buildings and civil en-gineering works/Sus-tainability in buildings and civil engineering works

6 Virtual (Unknown)



6 Tokyo (Japan) TC 67/SC 9 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Liquefied natural gas installations and equipment

6 Paris (France) TC 79/SC 2 Light metals and their alloys/Or-ganic and anodic oxidation coatings on aluminium

6 Helsinki (Finland) TC 82 Mining

6 Berlin (Germany) TC 119/SC 2 Powder metallurgy/Sampling and testing methods for powders (including powders for hardmetals)

6 Berlin (Germany) TC 119/SC 3 Powder metallurgy/Sampling and testing methods for sintered metal materials (ex-cluding hardmetals)

6-7 Berlin (Germany) TC 119 Powder metallurgy

7 Berlin (Germany) TC 119/SC 4 Powder metallurgy/Sampling and test-ing methods for hardmetals

9-10 Xian (China) * TC 135/SC 9 Non-destructive test-ing/Acoustic emission testing

10 Berlin (Germany) TC 59/SC 18 Buildings and civil en-gineering works/Con-struction procurement

10-13 Bucarest (Romania)

TC 172/SC 1 Optics and photon-ics/Fundamental standards

10-14 Hoffman Estates, Illinois (USA)

TC 58/SC 2 Gas cylinders/Cylin-der fittings

10-14 Tokyo (Japan) TC 153 Valves

10-14 Redlands (USA) TC 251 Asset management

11 Berlin (Germany) TC 59 Buildings and civil engineering works

11-12 Beijing (China) TC 298 Rare earth


12 Vienna (Austria) TC 83/SC 4 Sports and other rec-reational facilities and equipment/Snows-ports equipment

12-13 Hangzhou (China)

TC 70/SC 8 Internal combus-tion engines/Ex-haust gas emission measurement

12-14 Berlin (Germany) JTC 1/SC 17 Information technol-ogy/Cards and per-sonal identification

12-14 Norwood (USA) TC 21/SC 5 Equipment for fire protection and fire fighting/Fixed firefighting systems using water


TC 201 Surface chemical analysis

14 Hangzhou (China)

TC 70 Internal combustion engines

14 Tokyo (Japan) TC 173/SC 2 Assistive products for persons with disabil-ity/Classification and terminology

14-24 Pittsburgh (USA) TC 94/SC 15 Personal safety -- Protective clothing and equipment/Respiratory protective devices

15 Seoul (Korea, Republic of)

TC 201/SC 6 Surface chemi-cal analysis/Sec-ondary ion mass spectrometry

17-21 Berlin (Germany) JTC 1/SC 38 Information technol-ogy/Cloud Comput-ing and Distributed Platforms

17-21 Moscow (Rus-sian Federation)



TC 58/SC 3 Gas cylinders/Cylin-der design


TC 94/SC 6 Personal safety -- Protective clothing and equipment/Eye and face protection

17-21 Kyoto (Japan) TC 138 Plastics pipes, fittings and valves for the transport of fluids

17-21 Berlin (Germany) TC 154 Processes, data elements and documents in com-merce, industry and administration

17-21 Berlin (Germany) TC 181 Safety of toys

17-21 Amman (Jordan) TC 262 Risk management

18 Shanghai (China) TC 2/SC 14 Fasteners/Surface coatings

18 Moscow (Rus-sian Federation)

TC 20/SC 6 Aircraft and space vehicles/Standard atmosphere

18-20 Madrid (Spain) * TC 216 Footwear

19 Shanghai (China) TC 2/SC 7 Fasteners/Reference standards

19 Tokyo (Japan) TC 17/SC 7 Steel/Methods of testing (other than mechanical tests and chemical analysis)


TC 92/SC 3 Fire safety/Fire threat to people and environment

19-20 Miami (USA) TC 44/SC 14 Welding and allied processes/Weld-ing and brazing in aerospace

19-21 Berlin (Germany) TC 46/SC 8 Information and documentation/Quality - Statistics and performance evaluation

19-21 Philadelphia (USA)

TC 202 Microbeam analysis

20 Shanghai (China) TC 2/SC 12 Fasteners/Fasteners with metric internal thread

20 Shanghai (China) TC 5/SC 2 Ferrous metal pipes and metallic fittings/Cast iron pipes, fit-tings and their joints


TC 92/SC 1 Fire safety/Fire initia-tion and growth

20 Crete (Greece) TC 180/SC 1 Solar energy/Climate - Measurement and data

20-21 Tokyo (Japan) TC 17/SC 16 Steel/Steels for the reinforcement and prestressing of concrete


TC 58 Gas cylinders

20-21 Vienna (Austria) TC 227 Springs

21 Shanghai (China) TC 2 Fasteners

21 Shanghai (China) TC 2/SC 11 Fasteners/Fasteners with metric external thread

21 Shanghai (China) TC 5 Ferrous metal pipes and metallic fittings


TC 92/SC 4 Fire safety/Fire safety engineering

21 Crete (Greece) TC 180 Solar energy

22-23 Orlando (USA) TC 24/SC 4 Particle charac-terization includ-ing sieving/Particle characterization

24 Tokyo (Japan) TC 79/SC 9 Light metals and their alloys/Symbolization

24-26 Tokyo (Japan) TC 79/SC 11 Light metals and their alloys/Titanium

24-27 Washington, D.C (USA)

PC 305 Sustainable non-sewered sanitation systems

24-27 Osaka (Japan) TC 126 Tobacco and tobacco products

24-28 Tokyo (Japan) TC 79 Light metals and their alloys

24-28 Tokyo (Japan) TC 164 Mechanical testing of metals


TC 172/SC 7 Optics and photon-ics/Ophthalmic optics and instruments

24-28 Paris (France) TC 190 Soil quality

24-28 Saint-Denis (France)

TC 190/SC 4 Soil quality/Biological methods

24-28 Athens (Greece) TC 258 Project, programme and portfolio management


25 Tokyo (Japan) TC 79/SC 4 Light metals and their alloys/Unalloyed (refined) aluminium ingots

25 Tokyo (Japan) TC 79/SC 6 Light metals and their alloys/Wrought aluminium and alu-minium alloys

25 Osaka (Japan) TC 126/SC 3 Tobacco and tobacco products/Vape and vapour products

25-26 Kyoto (Japan) TC 31/SC 9 Tyres, rims and valves/Valves for tube and tubeless tyres

26 Osaka (Japan) TC 126/SC 1 Tobacco and tobacco products/Physical and dimensional tests

26-28 Tokyo (Japan) TC 172/SC 5 Optics and photon-ics/Microscopes and endoscopes

27 Oslo (Norway) TC 67/SC 3 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Drilling and comple-tion fluids, and well cements

27 Tokyo (Japan) TC 79/SC 5 Light metals and their alloys/Magnesium and alloys of cast or wrought magnesium

27 Osaka (Japan) TC 126/SC 2 Tobacco and to-bacco products/Leaf tobacco

27 Frankfurt (Germany)

TC 131/SC 3 Fluid power systems/Cylinders

27 La Plaine St-Denis (France)

TC 190/SC 7 Soil quality/Soil and site assessment

27-28 Orlando (USA) TC 17/SC 12 Steel/Continuous mill flat rolled products

28 Berlin (Germany) TC 35/SC 12 Paints and varnishes/Preparation of steel substrates before ap-plication of paints and related products

28 Berlin (Germany) TC 35/SC 14 Paints and varnishes/Protective paint systems for steel structures

28 London (United Kingdom)

TC 123 Plain bearings

28 Saint-Denis (France)

TC 190/SC 1 Soil quality/Evaluation of criteria, terminol-ogy and codification

28 Paris (France) TC 190/SC 3 Soil quality/Chemi-cal methods and soil characteristics

Washington, D.C (USA)

** TC 34/SC 16 Food products/Hori-zontal methods for molecular biomarker analysis

October-November 2016

30-4 Kuala Lumpur (Malaysia)


31-4 Cheonan (Korea, Republic of)

TC 23/SC 6 Tractors and machin-ery for agriculture and forestry/Equipment for crop protection


TC 45/SC 1 Rubber and rubber products/Rubber and plastics hoses and hose assemblies


TC 45/SC 2 Rubber and rubber products/Testing and analysis

November 2016

1-4 Arlington (USA) * TC 22/SC 36 Road vehicles/Safety and impact testing

3 Kuala Lumpur (Malaysia)

TC 45/SC 4 Rubber and rubber products/Products (other than hoses)

4 Frankfurt (Germany)

TC 291 Domestic gas cook-ing appliances


TC 241 Road traffic safety management systems

7-8 Tel Aviv (Israel) TC 282/SC 3 Water reuse/Risk and performance evalu-ation of water reuse systems

7-11 Orlando (USA) PC 302 Guidelines for audit-ing management systems

7-11 Delft (Netherlands)

TC 210 Quality management and corresponding general aspects for medical devices

7-11 Singapore (Singapore)

TC 229 Nanotechnologies

7-11 Tel Aviv (Israel) TC 282/SC 1 Water reuse/Treated wastewater reuse for Irrigation

7-12 Lillehammer (Norway)

** JTC 1 Information technology

8-9 Düsseldorf (Germany)

TC 17/SC 4 Steel/Heat treatable and alloy steels

8-10 Kobe (Japan) TC 212 Clinical laboratory testing and in vitro di-agnostic test systems

9 Sydney (Australia)

TC 98/SC 1 Bases for design of structures/Terminol-ogy and symbols

9-10 Tel Aviv (Israel) TC 282/SC 2 Water reuse/Water reuse in urban areas


TC 98/SC 2 Bases for design of structures/Reliability of structures


TC 98/SC 3 Bases for design of structures/Loads, forces and other actions

10 Tel Aviv (Israel) TC 282 Water reuse

10-11 Bern (Switzerland)

TC 34/SC 12 Food products/Sen-sory analysis

10-11 Busan (Korea, Republic of)

TC 159/SC 4 Ergonomics/Ergo-nomics of human-system interaction


TC 98 Bases for design of structures

13-17 Lillehammer (Norway)

TC 215 Health informatics

14 Berlin (Germany) TC 83/SC 6 Sports and other recreational facilities and equipment/Mar-tial arts


14-15 Milton (Canada) TC 44/SC 8 Welding and allied processes/Equip-ment for gas welding, cutting and allied processes

14-15 Milton (Canada) TC 44/SC 10 Welding and allied processes/Quality management in the field of welding

14-18 Toronto (Canada) TC 44 Welding and allied processes

15-16 Toronto (Canada) TC 44/SC 7 Welding and allied processes/Represen-tation and terms

15-17 Boulogne Billan-court (France)

* TC 22/SC 39 Road vehicles/Ergonomics

15-18 Linyi (China) TC 134 Fertilizers and soil conditioners

16 Milton (Canada) TC 44/SC 5 Welding and allied processes/Testing and inspection of welds

16 Toronto (Canada) TC 44/SC 9 Welding and allied processes/Health and safety

17 Oslo (Norway) TC 67/SC 8 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Arctic operations

17 Hiroshima City (Japan)

TC 244 Industrial furnaces and associated pro-cessing equipment

17-18 Orlando (USA) TC 299 Robotics

18 Rome (Italy) TC 160/SC 1 Glass in build-ing/Product considerations

18 Florence (Italy) TC 160/SC 2 Glass in building/Use considerations


PC 303 Guidelines on con-sumer warranties and guarantees

21-24 Toronto (Canada) TC 272 Forensic sciences

21-25 Beijing (China) PC 287 Chain of custody of wood and wood-based products

22-24 Christchurch (New Zealand)

** TC 20/SC 1 Aircraft and space vehicles/Aerospace electrical requirements

24 Brussels (Belgium)

TC 94/SC 3 Personal safety -- Protective clothing and equipment/Foot protection


TC 281 Fine Bubble Technology

24-26 Istanbul (Turkey) TC 34/SC 3 Food products/Fruits and vegetables and their derived products

25 Tokyo (Japan) TC 300 Solid recovered fuels

November-December 2016

27-2 Rotterdam (Netherlands)

TC 176 Quality management and quality assurance

28-2 Redlands (USA) * TC 211 Geographic in-formation/Geomatics

29-1 Tokyo (Japan) PC 294 Guidance on unit pricing

30-2 Kurashiki (Japan) TC 172/SC 9 Optics and photon-ics/Electro-optical systems

December 2016


TC 67 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries

1-2 Sapporo (Japan) TC 265 Carbon dioxide capture, transporta-tion, and geological storage

1-2 Paris (France) * TC 297 Waste management, recycling and road operation service


TC 217 Cosmetics

6-8 Lübeck (Germany)

TC 121/SC 2 Anaesthetic and res-piratory equipment/Airways and related equipment

6-9 Rio de Janeiro (Brazil)

PC 277 Sustainable procurement

6-9 Dublin (Ireland) * TC 275 Sludge recovery, recycling, treatment and disposal

8 Clearwater (USA) TC 83/SC 5 Sports and other recreational facilities and equipment/Ice hockey equipment and facilities

8-9 Petten (Netherlands)

TC 197 Hydrogen technologies

9 Beijing (China) TC 34/SC 6 Food products/Meat, poultry, fish, eggs and their products

9 Berlin (Germany) TC 44/SC 6 Welding and allied processes/Resistance welding and allied mechanical joining

15-16 Erlangen (Germany)

TC 184/SC 1 Automation systems and integration/Physi-cal device control

January 2017

16-20 Tokyo (Japan) ** TC 107 Metallic and other inorganic coatings

February 2017

6-10 Tunis (Tunisia) ** JTC 1/SC 6 Information technol-ogy/Telecommunica-tions and information exchange between systems

6-10 Berlin (Germany) ** JTC 1/SC 35 Information technol-ogy/User interfaces

6-12 (South Africa) ** TC 58/SC 4 Gas cylinders/Opera-tional requirements for gas cylinders


* TC 8/SC 8 Ships and marine technology/Ship design


** TMB Technical Manage-ment Board

Chennai (India) ** TC 120 Leather

Paris (France) ** TC 147/SC 3 Water qual-ity/Radioactivity measurements

March 2017


6 Kyoto (Japan) ** TC 60 Gears

16-17 Geneva (Switzerland)

** COUNCIL Council

20-24 Leeds (United Kingdom)

* TC 94/SC 13 Personal safety -- Protective clothing and equipment/Pro-tective clothing

27-31 Chengdu (China) * JTC 1/SC 38 Information technol-ogy/Cloud Comput-ing and Distributed Platforms

29 Philadelphia (USA)

* TC 219 Floor coverings

April 2017

3-4 Chicago (USA) TC 117 Fans


* TC 118 Compressors and pneumatic tools, ma-chines and equipment


* TC 118/SC 3 Compressors and pneumatic tools, machines and equip-ment/Pneumatic tools and machines


* TC 118/SC 6 Compressors and pneumatic tools, machines and equip-ment/Air compressors and compressed air systems


* TC 133 Clothing sizing sys-tems - size designa-tion, size measure-ment methods and digital fittings

10 Guilin (China) ** TC 29/SC 8 Small tools/Tools for pressing and moulding

17-21 Hangzhou (China)

** TC 215 Health informatics


** TC 215 Health informatics

24-25 Hamilton (New Zealand)

* JTC 1/SC 27 Information tech-nology/IT Security techniques

26 Milan (Italy) * TC 67/SC 2 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Pipeline transporta-tion systems

26-27 Vancouver (Canada)

* CASCO Committee on con-formity assessment

Toulouse (France)

** TC 31/SC 5 Tyres, rims and valves/Agricultural tyres and rims

Toulouse (France)

** TC 31/SC 6 Tyres, rims and valves/Off-the-road tyres and rims

Toulouse (France)

** TC 31/SC 7 Tyres, rims and valves/Industrial tyres and rims

Orlando (USA) ** TC 34/SC 2 Food products/Ole-aginous seeds and fruits and oilseed meals

Orlando (USA) ** TC 34/SC 11 Food products/Animal and vegetable fats and oils

(Unknown) ** TC 34/SC 15 Food products/Coffee

(Côte-d'Ivoire) ** TC 34/SC 18 Food products/Cocoa

(Korea, Repub-lic of)

** TC 292 Security and resilience

May 2017

7-12 Oslo (Norway) * TC 184/SC 4 Automation systems and integration/Indus-trial data

8 Berlin (Germany) * TC 171/SC 1 Document manage-ment applications/Quality, preserva-tion and integrity of information


* TC 10 Technical product documentation

8-12 Vienna (Austria) * TC 39/SC 2 Machine tools/Test conditions for metal cutting machine tools


* TC 161 Control and protec-tive devices for gas and/or oil burners and appliances

8-12 Berlin (Germany) ** TC 171 Document manage-ment applications

11 Stockholm (Sweden)

** TC 10/SC 1 Technical product documentation/Basic conventions

15-18 (USA) ** TC 85/SC 5 Nuclear energy, nuclear technolo-gies, and radiological protection/Nuclear in-stallations, processes and technologies

15-19 Washington, D.C (USA)

* TC 4 Rolling bearings

15-19 Seattle (USA) * TC 31 Tyres, rims and valves

15-19 Seattle (USA) * TC 31/SC 3 Tyres, rims and valves/Passenger car tyres and rims

15-19 Seattle (USA) * TC 31/SC 10 Tyres, rims and valves/Cycle, moped, motorcycle tyres and rims

15-19 Rio de Janeiro (Brazil)

TC 68 Financial services

18 Busan (Korea, Republic of)

* TC 67/SC 5 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Casing, tubing and drill pipe


** COPOLCO Committee on con-sumer policy

22-26 Pretoria (South Africa)

* TC 46/SC 4 Information and documentation/Tech-nical interoperability

22-26 (USA) ** TC 121/SC 1 Anaesthetic and res-piratory equipment/Breathing attach-ments and anaes-thetic machines

22-26 (Panama) ** TC 228 Tourism and related services

25-26 Hannover (Germany)

* TC 184/SC 5 Automation systems and integration/Inter-operability, integra-tion, and architec-tures for enterprise systems and automa-tion applications


(Japan) ** JTC 1/SC 32 Information technolo-gy/Data management and interchange

Stockholm (Sweden)

** TC 10/SC 6 Technical product documentation/Me-chanical engineering documentation

Stockholm (Sweden)

** TC 10/SC 8 Technical prod-uct documenta-tion/Construction documentation

(Sweden) ** TC 29 Small tools

(Unknown) ** TC 226 Materials for the production of primary aluminium

May-June 2017

27-2 (Ireland) ** TC 238 Solid biofuels

29-2 Okayama (Japan)

* JTC 1/SC 40 Information tech-nology/IT Service Management and IT Governance

31-2 Delft (Netherlands)

** TC 145 Graphical symbols

June 2017

5-9 (Unknown) ** TC 268 Sustainable cities and communities

5-9 (Unknown) ** TC 268/SC 1 Sustainable cities and communities/Smart community infrastructures

6-9 Jeju (Korea, Republic of)

** TC 156 Corrosion of metals and alloys

7-9 (USA) ** TC 220 Cryogenic vessels

12-16 Paris (France) * TC 20/SC 14 Aircraft and space ve-hicles/Space systems and operations

12-16 Shanghai (China) * TC 29/SC 10 Small tools/Assem-bly tools for screws and nuts, pliers and nippers

14-15 Geneva (Switzerland)

** TMB Technical Manage-ment Board


* JTC 1/SC 28 Information technol-ogy/Office equipment


* TC 22/SC 32 Road vehicles/Elec-trical and electronic components and gen-eral system aspects

19-23 Tokyo (Japan) ** TC 34/SC 9 Food products/Microbiology

19-23 Cape Town (South Africa)

* TC 69 Applications of statis-tical methods


* TC 69/SC 1 Applications of statis-tical methods/Termi-nology and symbols


* TC 69/SC 4 Applications of statistical methods/Applications of statistical methods in product and process management


* TC 69/SC 6 Applications of statis-tical methods/Meas-urement methods and results


* TC 69/SC 7 Applications of statistical methods/Applications of statistical and related techniques for the implementation of Six Sigma


* TC 69/SC 8 Applications of sta-tistical methods/Ap-plication of statistical and related methodol-ogy for new technol-ogy and product development

19-23 (Portugal) ** TC 149/SC 1 Cycles/Cycles and major sub-assemblies

23-30 (Australia) ** JTC 1/SC 36 Information tech-nology/Information technology for learn-ing, education and training

(USA) ** TC 42 Photography

(Unknown) ** TC 108/SC 5 Mechanical vibration, shock and condition monitoring/Condition monitoring and diag-nostics of machine systems

Delft (Netherlands)

** TC 274 Light and lighting

2nd Quarter 2017

Tsukuba (Japan) ** TC 92 Fire safety

(India) ** TC 113 Hydrometry

July 2017

22 Turin (Italy) * JTC 1/SC 29 Information technol-ogy/Coding of audio, picture, multimedia and hypermedia information

24-28 Paris (France) * JTC 1/SC 35 Information technol-ogy/User interfaces

(Unknown) ** JTC 1/SC 34 Information tech-nology/Document description and pro-cessing languages

September 2017

11-15 San Francisco (USA)

* JTC 1/SC 38 Information technol-ogy/Cloud Comput-ing and Distributed Platforms


** TC 17/SC 17 Steel/Steel wire rod and wire products


* TC 164 Mechanical testing of metals

18 Berlin (Germany) * COUNCIL Council

19 Berlin (Germany) ** TMB Technical Manage-ment Board


* TC 221 Geosynthetics

20-22 Berlin (Germany) ** GA General Assembly

25-29 (Unknown) ** TC 58/SC 2 Gas cylinders/Cylin-der fittings

27 Düsseldorf (Germany)

* TC 44/SC 13 Welding and allied processes/Braz-ing materials and processes

29 Virtual (Unknown)

TC 20/SC 17 Aircraft and space vehicles/Airport infrastructure


(China) ** JTC 1/SC 2 Information technol-ogy/Coded character sets

London (United Kingdom)

** JTC 1/SC 22 Information technol-ogy/Programming languages, their envi-ronments and system software interfaces

(Japan) ** TC 20/SC 1 Aircraft and space vehicles/Aerospace electrical requirements

(Korea, Repub-lic of)

** TC 61 Plastics

Vienna (Austria) ** TC 165 Timber structures

(Nigeria) ** TC 260 Human resource management

3rd Quarter 2017

Vienna (Austria) ** TC 289 Brand evaluation

Beijing (China) ** TC 289 Brand evaluation

October 2017

2-7 Vladivostok (Russian Federation)

* JTC 1 Information technology

8 New Orleans (USA)

* TC 38 Textiles

9-13 New Delhi (India) ** TC 178 Lifts, escalators and moving walks

11 New Orleans (USA)

* TC 38/SC 1 Textiles/Tests for coloured textiles and colorants


* TC 38/SC 2 Textiles/Cleansing, finishing and water resistance tests


* TC 38/SC 23 Textiles/Fibres and yarns


* TC 38/SC 24 Textiles/Condition-ing atmospheres and physical tests for textile fabrics

22-27 Hawaii (USA) * TC 45 Rubber and rubber products

23-27 (China) ** TC 39/SC 2 Machine tools/Test conditions for metal cutting machine tools

November 2017

(India) ** TC 54 Essential oils

(Australia) ** TC 292 Security and resilience

4th Quarter 2017

(China) ** TC 34/SC 4 Food products/Cere-als and pulses

Month unknown 2017

(North America) ** JTC 1/SC 24 Information technol-ogy/Computer graph-ics, image processing and environmental data representation

(USA) ** TC 23/SC 18 Tractors and machin-ery for agriculture and forestry/Irrigation and drainage equipment and systems

(Australia) ** TC 27 Solid mineral fuels

(Australia) ** TC 27/SC 1 Solid mineral fuels/Coal preparation: Terminology and performance

(Australia) ** TC 27/SC 3 Solid mineral fuels/Coke

(Australia) ** TC 27/SC 4 Solid mineral fuels/Sampling

(Australia) ** TC 27/SC 5 Solid mineral fuels/Methods of analysis

Erlangen (Germany)

** TC 36 Cinematography

Erlangen (Germany)

** TC 36 Cinematography

(South Africa) ** TC 46 Information and documentation

(South Africa) ** TC 46/SC 11 Information and doc-umentation/Archives/records management

(USA) ** TC 198 Sterilization of health care products

Milan (Italy) ** TC 206 Fine ceramics

(Malaysia) ** TC 267 Facilities management

(China) ** TC 301 Energy management and energy saving

February 2018

12-18 (Sweden) ** TC 58/SC 4 Gas cylinders/Opera-tional requirements for gas cylinders

1st Quarter 2018

(Netherlands) ** JTC 1/SC 35 Information technol-ogy/User interfaces

June 2018

Daegu (Korea, Republic of)

** JTC 1/SC 36 Information tech-nology/Information technology for learn-ing, education and training

(Norway) ** TC 292 Security and resilience

September 2018

(Japan) ** TC 61 Plastics

3rd Quarter 2018

(Japan) ** JTC 1/SC 35 Information technol-ogy/User interfaces

(Netherlands) ** TC 92 Fire safety

Sao Paulo (Brazil)

** TC 135 Non-destructive testing

October 2018

(Malaysia) ** TC 215 Health informatics

Month unknown 2018

(Europe) ** JTC 1/SC 24 Information technol-ogy/Computer graph-ics, image processing and environmental data representation

Zhuhai (China) ** JTC 1/SC 28 Information technol-ogy/Office equipment

(China) ** TC 45 Rubber and rubber products

(USA) ** TC 94/SC 13 Personal safety -- Protective clothing and equipment/Pro-tective clothing


(China) ** TC 94/SC 14 Personal safety -- Protective clothing and equipment/Firefighters' personal equipment

Milan (Italy) ** TC 161 Control and protec-tive devices for gas and/or oil burners and appliances

Buenos Aires (Argentina)

** TC 228 Tourism and related services

(Unknown) ** TC 276 Biotechnology

(Mexico) ** TC 301 Energy management and energy saving

June 2019

Beijing (China) ** JTC 1/SC 36 Information tech-nology/Information technology for learn-ing, education and training

Month unknown 2019

(Asia) ** JTC 1/SC 24 Information technol-ogy/Computer graph-ics, image processing and environmental data representation

Month unknown 2020

(North America) ** JTC 1/SC 24 Information technol-ogy/Computer graph-ics, image processing and environmental data representation

iso update · iso update, supplement to iso focus ... iec/cd 60601-2-26 medical electrical...

Documents