supplement to iso focus+ · iso update supplement to iso focus+ july 2012 people and places iso...
TRANSCRIPT
ISO Update
Supplement to ISO Focus+
July 2012
People and places
ISO Members 2
International Standards in processfrom 1 to 30 June 2012
Committee Drafts (CD) registered 3
Draft International Standards (DIS) circulated 5
Final draft International Standards (FDIS) circulated 10
Standards published 13
Standards confirmed 18
Standards withdrawn 19
Meeting calendar 20
People and places
2 ISO Update, Supplement to ISO Focus+– July 2012
ISO Members
Since the June 2012 issue of ISO Update Supplement to ISO Focus+, the following changes affecting ISO members have occurred:
Membership change
Correspondent member
The membership status of the Dominica Bureau of Standards (DBOS) has been upgraded from subscriber member to correspondent member as from 1 July 2012. Their contact details read as follows:
DOMINICA/DOMINIQUE (DBOS)
Dominica Bureau of Standards 9 Great Marlborough Street P.O. Box 1015 ROSEAU
Director: Dr. Steve John
Tel. +1 767 448 16 85 Fax +1 767 449 92 17 E-Mail [email protected] Web www.dominicastandards.org
New CEOs :
Member bodies
ALGERIA (IANOR) Directrice Générale a.i. : Mme Dris Hanane
BELARUS (BELST)
Chairman: Mr. Viktor Nazarenko
INDONESIA (BSN)
Acting Director General: Mr. B. Suprapto
JAMAICA (BSJ)
Executive Director: Ms. Yvonne Hall
TUNISIA (INNORPI)
Directeur Général: M. Nébil Ben Bechir
UZBEKISTAN (UZSTANDARD)
Director General: Mr. Abdusalam K. Kurbanov
Correspondent members:
BRUNEI DARUSSALAM (ABCI)
Head: (Vacant)
HONG KONG, China (ITCHKSAR)
Executive Administrator: Mr. W. W. Wong
MACAU, China (CPTTM)
Director General: Dr. Ka Hung Shuen
NEPAL (NBSM)
Director General: Mr. Ram Adhar Sah
UGANDA (UNBS)
Acting Executive Director: Dr. Ben Manyindo
ISO Update, Supplement to ISO Focus -- July 2012 3
International Standards in process
An International Standard is the result of an agreement between the member bodies of ISO. A first important step towards an International Standard takes the form of a committee draft (CD) - this is circulated for study within an ISO technical committee. When consensus has been reached within the technical committee, the document is sent to the Central Secretariat for processing as a draft International Stand-ard (DIS). The DIS requires approval by at least 75 % of the member bodies casting a vote. A confirmation vote is subsequently carried out on a final draft International Standard (FDIS), the approval criteria remaining the same.
CD registered
Period from 01 June to 30 June 2012
These documents are currently under consideration in the technical committee.
They have been registred at the Central Secretariat.
TC 8 Ships and marine technologyISO/CD 17325-1
Ships and marine technology — Marine envi-ronment protection — Part 1: Oil spill booms — Design Criteria
TC 17 SteelISO/CD 16573 Method for evaluation of hydrogen delayed
fracture resistance of high strength steels
TC 20 Aircraft and space vehiclesISO/CD 16699 Space systems — Disposal of orbital launch
stages
TC 22 Road vehiclesISO/CD 3468 Passenger cars — Windscreen defrosting and
demisting systems — Test method
ISO/CD 16505 Road vehicles — Ergonomic and performance aspects of Camera-Monitor Systems — Re-quirements and test procedures
ISO/CD 6469-4 Electrically propelled road vehicles — Safety specifications — Part 4: Post crash electrical safety requirements
ISO/CD 17409 Electrically propelled road vehicles — Con-nection to an external electric power supply — Safety requirements
ISO/CD 23828 Fuel cell road vehicles - Energy consumption measurement — Vehicles fuelled with com-pressed hydrogen
TC 25 Cast irons and pig ironsISO/DTR 16078
Cast Irons - Classification and designation of casting imperfections
TC 34 Food productsISO/CD 16649-3
Microbiology of food and animal feeding stuffs — Horizontal method for the enu-meration of beta-glucuronidase-positive Escherichia coli — Part 3: Detection and most probable number technique using 5-bromo-4-chloro-3-indolyl-beta-D-glucuronide
TC 37 Terminology and other language and content resources
ISO/CD 24617-4
Language resource management — Seman-tic annotation framework (SemAF) — Part 4: Semantic roles (SemAF-SRL)
TC 38 Textiles
ISO/CD 3074 Wool — Determination of dichloromethane-soluble matter in combed sliver
TC 39 Machine tools
ISO/CD 17543-1
Machines tools — Test conditions for acces-sory spindle heads — Part 1: Horizontal spindle machines
TC 43 Acoustics
ISO/CD 16254 Measurement of minimum noise emitted by road vehicles
TC 44 Welding and allied processes
ISO/CD 23277 Non-destructive testing of welds — Penetrant testing of welds — Acceptance levels
ISO/CD 23278 Non-destructive testing of welds — Magnetic particle testing of welds — Acceptance levels
ISO/CD 15614-7
Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 7: Overlay welding
ISO/CD 15614-8
Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 8: Welding of tubes to tube-plate joints
TC 45 Rubber and rubber products
ISO/CD 17257 Rubber — Identification of polymers — Pyro-lytic gas-chromatographic method using mass-spectrometric detection
ISO/DTS 17796
Rubber — Qualitative determination of vulcani-zation-fume composition by thermodesorption and gas-chromatographic/mass-spectrometric analysis
ISO/CD 1434 Natural rubber in bales — Amount of bale coat-ing — Determination
TC 46 Information and documentation
ISO/CD 21127 Information and documentation — A reference ontology for the interchange of cultural heritage information
TC 59 Buildings and civil engineering works
ISO/CD 6707-2 Building and civil engineering — Vocabulary — Part 2: Contract terms
TC 61 Plastics
ISO/CD 15512 Plastics — Determination of water content
ISO/CD 17223 Plastics — Determination of yellowness index and change in yellowness index
TC 67 Materials, equipment and offshore structures for petroleum, petrochemi-cal and natural gas industries
ISO/DTR 19905-2
Petroleum and natural gas industries — Site-specific assessment of mobile offshore units — Part 2: Jack-ups commentary and detailed sample calculation
TC 68 Financial services
ISO/CD 12812-1
Mobile Financial Services — Part 1: General framework
TC 94 Personal safety -- Protective clothing and equipment
ISO/CD 17493 Clothing and equipment for protection against heat — Test method for convective heat resist-ance using a hot air circulating oven
TC 106 Dentistry
ISO/CD 24234 Dentistry — Mercury and alloys for dental amalgam
4 ISO Update, Supplement to ISO Focus -- July 2012
ISO/CD 7494-2 Dentistry — Dental units — Part 2: Water and air supply
ISO/CD 9687 Dental equipment — Graphical symbols
TC 108 Mechanical vibration, shock and condi-tion monitoring
ISO 16063-22:2005/CD Amd 1
Methods for the calibration of vibration and shock transducers — Part 22: Shock calibra-tion by comparison to a reference transducer — Amendment 1
TC 127 Earth-moving machineryISO/CD 17253 Earthmoving machines and RTT — Design
requirements for circulation on the road
ISO 7135:2009/CD Amd 1
Earth-moving machinery — Hydraulic excava-tors — Terminology and commercial specifica-tions — Amendment 1
TC 130 Graphic technologyISO/CD 15341 Graphic technology — Method for Radius
Determination of Printing Cylinders
TC 145 Graphical symbolsISO 7010:2011/CD Amd 170
Graphical symbols — Safety colours and safety signs — Registered safety signs — Amend-ment 170: Safety sign M047: Use self-con-tained breathing appliance
TC 150 Implants for surgeryISO/CD 13175-1
Implants for surgery — Calcium phosphates — Part 1: Hydroxyapatite powders
TC 156 Corrosion of metals and alloysISO/DTR 16335
Corrosion of metals and alloys — Corrosion tests in artificial atmospheres — Guidelines for selection of accelerated corrosion test for product qualification
TC 161 Control and protective devices for gas and/or oil burners and appliances
ISO/CD 23551-6
Safety and control devices for gas burners and gas-burning appliances — Particular require-ments — Part 6: Thermoelectric flame supervi-sion devices
TC 163 Thermal performance and energy use in the built environment
ISO/CD 9972 Thermal performance of buildings — Determi-nation of air permeability of buildings — Fan pressurization method
TC 165 Timber structuresISO/CD 13910 Timber structures - Strength graded timber -
Test methods for structural properties
TC 190 Soil qualityISO/CD 16558-1
Soil quality — Risk based petroleum hydro-carbons — Part 1: Determination of aliphatic and aromatic fractions of volatile petroleum hy-drocarbons using gas chromatography (static headspace method)
ISO/CD 16558-2
Soil quality — Risk-based petroleum hydrocar-bons — Part 2: Determination of aliphatic and aromatic fractions of semi-volatile petroleum hydrocarbons using gas chromatography with flame ionisation detection (GC/FID)
ISO/CD 17182 Soil quality — Determination of some selected phenols and chlorophenols — Gas chroma-tographic method with mass spectrometric detection
ISO/CD 14858 Soil quality - Environmental availability in soil — Use of soil extracts for the assessment of trace element bioavailability
TC 206 Fine ceramicsISO/CD 17095 Fine ceramics (advanced ceramics, advanced
technical ceramics) — Test method for inter-facial bond strength of ceramic materials at elevated temperatures
TC 209 Cleanrooms and associated controlled environments
ISO/CD 14644-12
Cleanrooms and associated controlled environ-ments — Part 12: Classification of air cleanli-ness by nanoscale particle concentration
TC 215 Health informatics
ISO/DTS 13582
Health Informatics — Sharing of OID registry information
ISO/CD 17583 Health informatics — Terminology constraints for coded data elements expressed in ISO Harmonized Data Types used in healthcare information interchange
IEC/DTR 80001-2-4
Application of risk management for IT-networks incorporating medical devices — Part 2-4: General implementation guidance for Health-care Delivery Organizations
TC 242 Energy Management
ISO/CD 50002 Energy audits
JTC 1 Information technology
ISO/IEC PDTR 29181-4
Telecommunications and Information Ex-change Between Systems — Future Networks: Problem Statement and Requirements — Part 4: Mobility
ISO/IEC PDTR 29181-6
Telecommunications and Information Exchange Between Systems — Future Networks: Prob-lem Statement and Requirements — Part 6: Media Distribution
ISO/IEC PDTR 29181-7
Telecommunications and Information Exchange Between Systems — Future Networks: Prob-lem Statement and Requirements — Part 7: Service Composition
ISO/IEC CD 24727-1
Identification cards — Integrated circuit card programming interfaces — Part 1: Architecture
ISO/IEC CD 30100-3
Interconnection of information technology equipment — Home network management — Part 3: Management applications
ISO/IEC CD 17922
Telebiometric authentication framework using biometric hardware security module (ITU-T X.bhsm | ISO/IEC xxxxx)
ISO/IEC CD 18014-4
Information technology — Security techniques — Time-stamping services — Part 4: Traceabil-ity of time sources
ISO/IEC CD 27038
Information technology — Security techniques — Specification for Digital Redaction
ISO/IEC PDTS 30104
Information Technology — Security Techniques — Physical Security Attacks, Mitigation Tech-niques and Security Requirements
ISO/IEC CD 30111
Vulnerability handling processes
ISO/IEC CD 20006-1
Information Technology for Learning, Educa-tion and Training — Information Model for Competency — Part 1: Competency General Framework and Information Model
ISO/IEC CD 20006-2
Information Technology for Learning, Education and Training — Information Model for Compe-tency — Part 2: Proficiency Level Information Model
ISO/IEC PDTR 29195
Passenger Processes for Biometric Recogni-tion in Automated Border Crossing Systems
ISO/IEC CD 17788
Information Technology — Cloud Computing — Vocabulary
ISO Update, Supplement to ISO Focus -- July 2012 5
DIS circulated
Period from 01 June to 30 June 2012
These documents have obtained substantial support within the ap-propriate ISO technical committee.
They have been submitted to the ISO member bodies for voting by the date shown.
* Available in English only
Vote terminates
TC 8 Ships and marine technology
ISO/DIS 24409-2
* Ships and marine technology — Design, location and use of shipboard safety signs, safety-related signs, safety notices and safety markings — Part 2: Catalogue
2012-11-12
ISO/DIS 24409-3
* Ships and marine technology — Design, location and use of shipboard safety signs, safety-related signs, safety notices and safety markings — Part 3: Code of practice
2012-11-12
ISO/DIS 16165 * Ships and marine technology — Marine environment protection — Terminology relating to oil spill response
2012-11-22
(Revision of ISO 16165:2001)
TC 20 Aircraft and space vehicles
ISO/DIS 19631 * Aerospace — Tube fittings for fluid systems, 5 000 psi (35 000 kPa) — Qualification specification
2012-11-07
ISO/DIS 19632 * Aerospace series — Fitting end, 24° internal cone, external thread, flareless type extra fine thread pitch inch series — De-sign standard
2012-11-07
ISO/DIS 22664 * Space data and information transfer systems — TC (telecom-mand) space data link protocol
2012-11-09
(Revision of ISO 22664:2005)
ISO/DIS 22667 * Space data and information transfer systems — Communica-tions operation procedure-1
2012-11-09
(Revision of ISO 22667:2005)
ISO/DIS 22669 * Space data and information transfer systems — Space link extension (SLE) — Return-all-frames service
2012-11-09
(Revision of ISO 22669:2007)
ISO/DIS 22670 * Space data and information transfer systems — Space link extension (SLE) — Return-chan-nel-frames service
2012-11-09
(Revision of ISO 22670:2006)
ISO/DIS 26143 * Space data and information transfer systems — Space link extension (SLE) — Return opera-tional control fields service
2012-11-09
(Revision of ISO 26143:2007)
ISO/DIS 16695 Space environment (natural and artificial — Earth's internal mag-netic reference field models
2012-11-30
TC 22 Road vehicles
ISO/DIS 2974.2
* Diesel engines — 60 degree female cones for high-pressure fuel injection components
2012-08-06
(Revision of ISO 2974:2005)
ISO/DIS 12357-3.2
Commercial road vehicles — Coupling equipment between vehicles in multiple vehicle combinations — Part 3: Strength requirements
2012-08-23
TC 23 Tractors and machinery for agriculture and forestry
ISO/DIS 27850.2
* Tractors for agriculture and for-estry — Falling object protective structures — Test procedures and performance requirements
2012-08-13
ISO 10517:2009/DAmd 1
* Powered hand-held hedge trim-mers — Safety — Amendment 1 2012-11-08
ISO/DIS 9912-2
Agricultural irrigation equipment — Filters for microirrigation — Part 2: Strainer-type filters and disc filters
2012-11-26
(Revision of ISO 9912-2:1992)
ISO/DIS 11783-6
* Tractors and machinery for agriculture and forestry — Se-rial control and communications data network — Part 6: Virtual terminal
2012-11-28
(Revision of ISO 11783-6:2010, ISO 11783-6:2010/CD Amd 1)
ISO/DIS 15639-1
* Standardization of injection sites for different animal species — Part 1: Companion animals (cats and dogs)
2012-12-01
ISO/DIS 24631-5
* Radio frequency identification of animals — RFID transceivers — Part 5: Procedure for testing the capability of reading ISO 11784 and ISO 11785 transponders
2012-12-01
TC 28 Petroleum products and lubricants
ISO/DIS 22854 * Liquid petroleum products — Determination of hydrocar-bon types and oxygenates in automotive-motor gasoline — Multidimensional gas chroma-tography method
2012-11-22
(Revision of ISO 22854:2008)
TC 30 Measurement of fluid flow in closed conduits
ISO/DIS 4064-1.2
* Water meters for cold potable water and hot water — Part 1: Metrological and technical requirements
2012-08-15
(Revision of ISO 4064-1:2005)
ISO/DIS 4064-2.2
* Water meters for cold potable water and hot water — Part 2: Test methods
2012-08-15
(Revision of ISO 4064-3:2005)
TC 34 Food products
ISO/DIS 17715 * Flour from wheat (Tricum aesti-vum) — Method for the measure-ment of damage to starch using an amperometric method
2012-09-17
ISO/DIS 17718 * Whole meal and flour from wheat (Triticum aestivum) — Determi-nation of rheological behaviour as a function of mixing and temperature increase
2012-09-17
6 ISO Update, Supplement to ISO Focus -- July 2012
ISO/DIS 16578 * Molecular biomarker analy-sis — General definitions and requirements for microarray detection of specific nucleic acid sequences
2012-11-21
TC 42 PhotographyISO/DIS 12233 * Photography — Electronic still
picture imaging — Resolution and spatial frequency responses
2012-11-21
(Revision of ISO 12233:2000)
ISO/DIS 18902 * Imaging materials — Processed imaging materials — Albums, framing and storage materials
2012-11-21
(Revision of ISO 18902:2007, ISO 18902:2007/Cor 1:2009)
TC 45 Rubber and rubber products
ISO/DIS 1629 * Rubber and latices — Nomenclature 2012-11-30
(Revision of ISO 1629:1995, ISO 1629:1995/Amd 1:2007)
ISO/DIS 11619 * Polyurethane tubing for use pri-marily in pneumatic installations — Dimensions and specification
2012-11-22
TC 58 Gas cylindersISO/DIS 5145 * Cylinder valve outlets for gases
and gas mixtures — Selection and dimensioning
2012-11-26
(Revision of ISO 5145:2004, ISO 5145:2004/Amd 1:2006, ISO 5145:2004/Amd 2:2008)
TC 59 Buildings and civil engi-neering works
ISO/DIS 6707-1
* Building and civil engineering — Vocabulary — Part 1: General terms
2012-11-20
(Revision of ISO 6707-1:2004)
TC 61 PlasticsISO/DIS 16396-1
* Plastics — Polyamide (PA) moulding and extrusion materials — Part 1: Designation system, marking of products and basis for specifications
2012-11-14
(Revision of ISO 1874-1:2010)
ISO/DIS 17855-1
* Plastics — Polyethylene (PE) moulding and extrusion materi-als — Part 1: Designation system and basis for specifications
2012-11-14
(Revision of ISO 1872-1:1993)
TC 70 Internal combustion engines
ISO/DIS 4548-13
* Methods of test for full-flow lubricating oil filters for internal combustion engines — Part 13: Static burst pressure test for composite pressure vessel materials
2012-11-26
TC 94 Personal safety -- Pro-tective clothing and equipment
ISO/DIS 12609-1
* Eyewear for protection against intense light sources used on hu-mans and animals for cosmetic and medical applications — Part 1: Specification for products
ISO/DIS 12609-2.2
* Eyewear for protection against intense light sources used on hu-mans and animals for cosmetic and medical applications — Part 2: Guidance for use
2012-08-13
TC 106 Dentistry
ISO/DIS 28888 * Dentistry — Screening method for erosion potential of oral rinses on dental hard tissues
2012-11-29
TC 122 Packaging
ISO/DIS 17451-1.2
* Packaging — Numeric Codifica-tion of Contents for Electronic Inventories and Manifests of Household Goods and Personal Effects Shipments — Part 1: Messaging and coding of inven-tory numbers, locations and exceptions
2012-11-27
TC 123 Plain bearings
ISO/DIS 3548-1
* Plain bearings — Thin-walled half bearings with or without flange — Part 1: Tolerances, design features and methods of test
2012-11-02
(Revision of ISO 3548:1999)
TC 130 Graphic technology
ISO/DIS 12647-1
* Graphic technology — Process control for the production of half-tone colour separations, proof and production prints — Part 1: Parameters and measurement methods
2012-11-21
(Revision of ISO 12647-1:2004)
ISO/DIS 12647-2
* Graphic technology — Process control for the production of half-tone colour separations, proof and production prints — Part 2: Offset lithographic processes
2012-11-21
(Revision of ISO 12647-2:2004, ISO 12647-2:2004/Amd 1:2007)
ISO/DIS 14298 * Graphic technology — Man-agement of security printing processes
2012-11-05
ISO/DIS 16759 * Graphic technology — Quanti-fication and communication for calculating the carbon footprint of print media products
2012-11-06
TC 145 Graphical symbols
ISO 7010:2011/DAmd 119
* Graphical symbols — Safety colours and safety signs — Reg-istered safety signs — Amend-ment 119: Safety sign E027: Medical grab bag
2012-11-26
ISO 7010:2011/DAmd 120
* Graphical symbols — Safety colours and safety signs — Reg-istered safety signs — Amend-ment 120: Safety sign E028: Oxygen resuscitator
2012-11-26
ISO 7010:2011/DAmd 121
* Graphical symbols — Safety colours and safety signs — Reg-istered safety signs — Amend-ment 121: Safety sign E029: Emergency escape breathing device
2012-11-26
ISO 7010:2011/DAmd 122
* Graphical symbols — Safety colours and safety signs — Reg-istered safety signs — Amend-ment 122: Safety sign E030: Shipboard safety equipment
2012-11-26
ISO 7010:2011/DAmd 123
* Graphical symbols — Safety colours and safety signs — Reg-istered safety signs — Amend-ment 123: Safety sign E031: Shipboard general alarm
2012-11-26
ISO Update, Supplement to ISO Focus -- July 2012 7
ISO 7010:2011/DAmd 124
* Graphical symbols — Safety colours and safety signs — Reg-istered safety signs — Amend-ment 124: Safety sign E032: Shipboard assembly station
2012-11-26
ISO 7010:2011/DAmd 125
* Graphical symbols — Safety colours and safety signs — Reg-istered safety signs — Amend-ment 125: Safety sign E033: Door slides right to open
2012-11-26
ISO 7010:2011/DAmd 126
* Graphical symbols — Safety colours and safety signs — Reg-istered safety signs — Amend-ment 126: Safety sign E034: Door slides left to open
2012-11-26
ISO 7010:2011/DAmd 128
* Graphical symbols — Safety colours and safety signs — Reg-istered safety signs — Amend-ment 128: Safety sign E036: Lifeboat
2012-11-26
ISO 7010:2011/DAmd 129
* Graphical symbols — Safety colours and safety signs — Reg-istered safety signs — Amend-ment 129: Safety sign E037: Rescue boat
2012-11-26
ISO 7010:2011/DAmd 130
* Graphical symbols — Safety colours and safety signs — Reg-istered safety signs — Amend-ment 130: Safety sign E038: Liferaft
2012-11-26
ISO 7010:2011/DAmd 131
* Graphical symbols — Safety colours and safety signs — Reg-istered safety signs — Amend-ment 131: Safety sign E039: Davit-launched liferaft
2012-11-26
ISO 7010:2011/DAmd 132
* Graphical symbols — Safety colours and safety signs — Reg-istered safety signs — Amend-ment 132: Safety sign E040: Lifebuoy
2012-11-26
ISO 7010:2011/DAmd 133
* Graphical symbols — Safety colours and safety signs — Reg-istered safety signs — Amend-ment 133: Safety sign E041: Lifebuoy with line
2012-11-26
ISO 7010:2011/DAmd 134
* Graphical symbols — Safety colours and safety signs — Reg-istered safety signs — Amend-ment 134: SAfety sign E042: Lifebuoy with light
2012-11-26
ISO 7010:2011/DAmd 135
* Graphical symbols — Safety colours and safety signs — Reg-istered safety signs — Amend-ment 135: Safety sign E043: Lifebuoy with line and light
2012-11-26
ISO 7010:2011/DAmd 136
* Graphical symbols — Safety colours and safety signs — Reg-istered safety signs — Amend-ment 136: Safety sign E044: Lifejacket
2012-11-26
ISO 7010:2011/DAmd 137
* Graphical symbols — Safety colours and safety signs — Reg-istered safety signs — Amend-ment 137: Safety sign E045: Child's lifejacket
2012-11-26
ISO 7010:2011/DAmd 138
* Graphical symbols — Safety colours and safety signs — Reg-istered safety signs — Amend-ment 138: Safety sign E046: Infant's lifejacket
2012-11-26
ISO 7010:2011/DAmd 139
* Graphical symbols — Safety colours and safety signs — Reg-istered safety signs — Amend-ment 139: Safety sign E047: Search and rescue transponder
2012-11-26
ISO 7010:2011/DAmd 140
* Graphical symbols — Safety colours and safety signs — Reg-istered safety signs — Amend-ment 140: Safety sign E048: Survival craft distress signal
2012-11-26
ISO 7010:2011/DAmd 141
* Graphical symbols — Safety colours and safety signs — Reg-istered safety signs — Amend-ment 141: Safety sign E049: Rocket parachute flare
2012-11-26
ISO 7010:2011/DAmd 142
* Graphical symbols — Safety colours and safety signs — Reg-istered safety signs — Amend-ment 142: Safety sign E050: Line-throwing appliance
2012-11-26
ISO 7010:2011/DAmd 143
* Graphical symbols — Safety colours and safety signs — Reg-istered safety signs — Amend-ment 143: Safety sign E051: Two-way VHF radiotelephone apparatus
2012-11-26
ISO 7010:2011/DAmd 144
* Graphical symbols — Safety colours and safety signs — Reg-istered safety signs — Amend-ment 144: Safety sign E052: Emergency position indicating radio beacon
2012-11-26
ISO 7010:2011/DAmd 145
* Graphical symbols — Safety colours and safety signs — Reg-istered safety signs — Amend-ment 145: Safety sign E053: Embarkation ladder
2012-11-26
ISO 7010:2011/DAmd 146
* Graphical symbols — Safety colours and safety signs — Reg-istered safety signs — Amend-ment 146: Safety sign E054: Marine evacuation slide
2012-11-26
ISO 7010:2011/DAmd 147
* Graphical symbols — Safety colours and safety signs — Reg-istered safety signs — Amend-ment 147: Safety sign E055: Marine evacuation chute
2012-11-26
ISO 7010:2011/DAmd 148
* Graphical symbols — Safety colours and safety signs — Reg-istered safety signs — Amend-ment 148: Safety sign E056: Survival clothing
2012-11-26
ISO 7010:2011/DAmd 149
* Graphical symbols — Safety colours and safety signs — Reg-istered safety signs — Amend-ment 149: Safety sign F008: Fixed fire extinguishing battery
2012-11-26
ISO 7010:2011/DAmd 150
* Graphical symbols — Safety colours and safety signs — Reg-istered safety signs — Amend-ment 150: Safety sign F009: Wheeled fire extinguisher
2012-11-26
ISO 7010:2011/DAmd 151
* Graphical symbols — Safety colours and safety signs — Reg-istered safety signs — Amend-ment 151: Safety sign F010: Portable foam applicator unit
2012-11-26
ISO 7010:2011/DAmd 152
* Graphical symbols — Safety colours and safety signs — Reg-istered safety signs — Amend-ment 152: Safety sign F011: Water fog applicator
2012-11-26
8 ISO Update, Supplement to ISO Focus -- July 2012
ISO 7010:2011/DAmd 153
* Graphical symbols — Safety colours and safety signs — Registered safety signs — Amendment 153: Safety sign F012: Fixed fire extinguishing installation
2012-11-26
ISO 7010:2011/DAmd 154
* Graphical symbols — Safety colours and safety signs — Reg-istered safety signs — Amend-ment 154: Safety sign F013: Fixed fire extinguishing bottle
2012-11-26
ISO 7010:2011/DAmd 155
* Graphical symbols — Safety colours and safety signs — Reg-istered safety signs — Amend-ment 155: Safety sign F014: Remote release station
2012-11-26
ISO 7010:2011/DAmd 156
* Graphical symbols — Safety colours and safety signs — Reg-istered safety signs — Amend-ment 156: Safety sign F015: Fire monitor
2012-11-26
ISO 7010:2011/DAmd 157
* Graphical symbols — Safety colours and safety signs — Reg-istered safety signs — Amend-ment 157: Saferty sign M037: Close and secure hatches in launch sequence
2012-11-26
ISO 7010:2011/DAmd 158
* Graphical symbols — Safety colours and safety signs — Reg-istered safety signs — Amend-ment 158: Safety sign M038: Start engine in launch sequence
2012-11-26
ISO 7010:2011/DAmd 159
* Graphical symbols — Safety colours and safety signs — Reg-istered safety signs — Amend-ment 159: Safety sign M039: Lower lifeboat to the water in launch sequence
2012-11-26
ISO 7010:2011/DAmd 160
* Graphical symbols — Safety colours and safety signs — Reg-istered safety signs — Amend-ment 160: Safety sign M040: Lower liferaft to the water in launch sequence
2012-11-26
ISO 7010:2011/DAmd 161
* Graphical symbols — Safety colours and safety signs — Reg-istered safety signs — Amend-ment 161: Safety sign M041: Lower rescue boat to the water in launch sequence
2012-11-26
ISO 7010:2011/DAmd 162
* Graphical symbols — Safety colours and safety signs — Reg-istered safety signs — Amend-ment 162: Safety sign M042: Release falls in launch sequence
2012-11-26
ISO 7010:2011/DAmd 163
* Graphical symbols — Safety colours and safety signs — Reg-istered safety signs — Amend-ment 163: Safety sign M043: Start water spray in launch sequence
2012-11-26
ISO 7010:2011/DAmd 164
* Graphical symbols — Safety colours and safety signs — Registered safety signs — Amendment 164: Safety sign M044: Start air supply in launch sequence
2012-11-26
ISO 7010:2011/DAmd 165
* Graphical symbols — Safety colours and safety signs — Reg-istered safety signs — Amend-ment 165: Safety sign M045: Release lifeboat gripes in launch sequence
2012-11-26
ISO 7010:2011/DAmd 166
* Graphical symbols — Safety colours and safety signs — Reg-istered safety signs — Amend-ment 166: Safety sign E057: Door opens by pulling on the left-hand side
2012-11-26
ISO 7010:2011/DAmd 167
* Graphical symbols — Safety colours and safety signs — Reg-istered safety signs — Amend-ment 167: Safety sign E058: Door opens by pulling on the right-hand side
2012-11-26
TC 155 Nickel and nickel alloys
ISO 11433:1993/DAmd 1
Nickel alloys — Determination of titanium content — Diantipy-rylmethane molecular absorp-tion spectrometric method — Amendment 1
2012-11-29
TC 161 Control and protective devices for gas and/or oil burners and appliances
ISO/DIS 23553-1
* Safety and control devices for oil burners and oil-burning ap-pliances — Particular require-ments — Part 1: Automatic and semi-automatic valves
2012-11-29
(Revision of ISO 23553-1:2007, ISO 23553-1:2007/Cor 1:2009)
TC 163 Thermal performance and energy use in the built environment
ISO/DIS 16343 * Energy performance of buildings — Methods for expressing en-ergy performance and for energy certification of buildings
2012-11-14
(Revision of ISO/WD 12842)
ISO/DIS 16346 * Energy performance of buildings — Assessment of overall energy performance
2012-11-14
(Revision of ISO/CD 11368, ISO/WD 12842)
ISO/DIS 12571 * Hygrothermal performance of building materials and products — Determination of hygroscopic sorption properties
2012-11-15
(Revision of ISO 12571:2000)
ISO/DIS 18096 * Thermal insulating products for building equipment and industri-al installations — Determination of maximum service temperature for preformed pipe insulation
2012-11-15
ISO/DIS 18097 * Thermal insulating products for building equipment and industrial installations — Deter-mination of maximum service temperature
2012-11-15
ISO/DIS 18098 * Thermal insulating products for building equipment and indus-trial installations — Determina-tion of the apparent density of preformed pipe insulation
2012-11-15
ISO/DIS 18099 * Thermal insulating products for building equipment and indus-trial installations — Determina-tion of the coefficient of thermal expansion
2012-11-15
ISO/DIS 15758 * Hygrothermal performance of building equipment and indus-trial installations — Calculation of water vapour diffusion — Cold pipe insulation systems
2012-11-22
(Revision of ISO 15758:2004)
ISO Update, Supplement to ISO Focus -- July 2012 9
TC 172 Optics and photonics
ISO/DIS 11979-7
* Ophthalmic implants — Intraocu-lar lenses — Part 7: Clinical investigations
2012-11-22
(Revision of ISO 11979-7:2006)
TC 190 Soil quality
ISO/DIS 13914 * Soil quality — Determination of dioxins and furans and dioxin-like polychlorinated biphenyls by gas chromatography with high-resolution mass selective detection (HR GC/MS)
2012-11-12
TC 201 Surface chemical analysis
ISO/DIS 13424 Surface chemical analysis — X-ray photoelectron spectros-copy — Reporting of results of thin-film analysis
2012-11-14
TC 204 Intelligent transport systems
ISO/DIS 21218 * Intelligent transport systems — Communications access for land mobiles (CALM) — Access technology support
2012-11-13
(Revision of ISO 21218:2008)
ISO/DIS 22839 * Intelligent transport system - Forward vehicle collision mitigation systems - Operation, performance, and verification requirements
2012-11-15
ISO/DIS 24102-1
* Intelligent transport systems — Communications access for land mobiles (CALM) — ITS station management — Part 1: Local management
2012-11-02
(Revision of ISO 24102:2010)
ISO/DIS 24102-3
* Intelligent transport systems — Communications access for land mobiles (CALM) — ITS station management — Part 3: Service access points
2012-11-02
(Revision of ISO 24102:2010)
ISO/DIS 24102-4
* Intelligent transport systems — Communications access for land mobiles (CALM) — ITS station management — Part 4: Station-internal management communications
2012-11-02
(Revision of ISO 24102:2010)
ISO/DIS 24102-5
* Intelligent transport systems — Communications access for land mobiles (CALM) — ITS station management — Part 5: Fast service advertisement protocol (FSAP)
2012-11-02
(Revision of ISO 24102:2010)
ISO/DIS 29281-1
Intelligent transport systems — Communication access for land mobiles (CALM) — Non-IP networking — Part 1: Fast networking & transport layer protocol (FNTP)
2012-11-28
(Revision of ISO 29281:2011)
ISO/DIS 29281-2
Intelligent transport systems — Communication access for land mobiles (CALM) — Non-IP networking — Part 2: Legacy system support
2012-11-28
(Revision of ISO 29281:2011)
TC 215 Health informatics
ISO/DIS 21549-2
* Health informatics — Patient healthcard data — Part 2: Com-mon objects
2012-11-29
(Revision of ISO 21549-2:2004)
ISO/DIS 21549-3
* Health informatics — Patient healthcard data — Part 3: Lim-ited clinical data
2012-11-29
(Revision of ISO 21549-3:2004)
ISO/DIS 21549-4
* Health informatics — Patient healthcard data — Part 4: Ex-tended clinical data
2012-11-29
(Revision of ISO 21549-4:2006)
JTC 1 Information technology
ISO/IEC DIS 18092
Information technology — Tel-ecommunications and informa-tion exchange between systems — Near Field Communication — Interface and Protocol (NFCIP-1)
2012-11-19
(Revision of ISO/IEC 18092:2004)
ISO/IEC DIS 22536
Information technology — Tel-ecommunications and informa-tion exchange between systems — Near Field Communication Interface and Protocol (NFCIP-1) — RF interface test methods
2012-11-06
(Revision of ISO/IEC 22536:2005)
ISO/IEC DIS 15940
Systems and software engineer-ing — Software Engineering Environment Services
2012-11-09
(Revision of ISO/IEC 15940:2006)
ISO/IEC DIS 26550
Software and Systems Engi-neering - Reference model for product line engineering and management
2012-11-09
ISO/IEC 14443-3:2011/DAmd 6
Identification cards — Contact-less integrated circuit cards — Proximity cards — Part 3: Initialization and anticollision — Amendment 6: Bit rates of 3fc/4, fc, 3fc/2 and 2fc
2012-11-21
ISO/IEC 14443-4:2008/DAmd 3
Identification cards — Contact-less integrated circuit cards — Proximity cards — Part 4: Trans-mission protocol — Amendment 3: Bit rates of 3fc/4, fc, 3fc/2 and 2fc
2012-11-21
ISO/IEC DIS 9973
Information technology — Com-puter graphics, image process-ing and environmental data representation — Procedures for registration of items
2012-11-09
(Revision of ISO/IEC 9973:2006)
ISO/IEC DIS 23006-4.2
Information technology — Multi-media service platform tech-nologies — Part 4: Elementary services
2012-08-07
(Revision of ISO/IEC 23006-4:2010)
ISO/IEC DIS 29120-1.2
Information technology — Ma-chine readable test data for biometric testing and reporting — Part 1: Test reports
2012-11-27
10 ISO Update, Supplement to ISO Focus -- July 2012
FDIS circulated
Period from 01 June to 30 June 2012
These Final draft International Standards have been submitted to the ISO member bodies for formal approval by the date shown
* Available in English only
Vote terminates
TC 5 Ferrous metal pipes and metallic fittings
ISO/FDIS 10380
* Pipework — Corrugated metal hoses and hose assemblies 2012-08-29
(Revision of ISO 10380:2003)
TC 8 Ships and marine technology
ISO/FDIS 3434 * Ships and marine technology — Heated glass panes for ships' rectangular windows
2012-08-16
(Revision of ISO 3434:1992, ISO 3434:1992/Amd 1:2004)
ISO/FDIS 16145-1
* Ships and marine technology — Protective coatings and inspec-tion method — Part 1: Dedicated sea water ballast tanks
2012-08-22
ISO/FDIS 16145-2
* Ships and marine technol-ogy — Protective coatings and inspection method — Part 2: Void spaces of bulk carriers and oil tankers
2012-08-22
ISO/FDIS 16145-3
* Ships and marine technology — Protective coatings and inspec-tion method — Part 3: Cargo oil tanks of crude oil tankers
2012-08-22
ISO/FDIS 11209
* Ships and marine technology — Large yachts — Deck crane and access gangways strength requirements
2012-08-19
TC 17 Steel
ISO/FDIS 683-1
* Heat-treatable steels, alloy steels and free-cutting steels — Part 1: Non-alloy steels for quenching and tempering·
2012-08-16
(Revision of ISO 683-1:1987)
ISO/FDIS 683-2
* Heat-treatable steels, alloy steels and free-cutting steels — Part 2: Alloy steels for quenching and tempering
2012-08-16
(Revision of ISO 683-1:1987, ISO/TR 11637:1997)
ISO/FDIS 683-11
* Heat-treatable steels, alloy steels and free-cutting steels — Part 11: Case-hardening steels
2012-08-16
(Revision of ISO 683-11:1987)
TC 20 Aircraft and space vehicles
ISO 8816:1993/FDAmd 1
* Aircraft — Solid-state remote power controllers — General requirements — Amendment 1
2012-08-26
ISO 8843:2005/FDAmd 1
* Aircraft — Crimp-removable contacts for electrical connec-tors — Identification system — Amendment 1
2012-08-26
ISO/FDIS 11227
* Space systems — Test pro-cedure to evaluate spacecraft material ejecta upon hyperveloc-ity impact
2012-08-22
ISO/FDIS 16159
* Space systems — Launch pad and integration site — Facility, system and equipment failure analysis
2012-08-02
TC 23 Tractors and machinery for agriculture and forestry
ISO/FDIS 15886-3
* Agricultural irrigation equipment — Sprinklers — Part 3: Charac-terization of distribution and test methods
2012-08-28
(Revision of ISO 15886-3:2004)
ISO/FDIS 12188-2
* Tractors and machinery for agriculture and forestry — Test procedures for positioning and guidance systems in agriculture — Part 2: Testing of satellite-based auto-guidance systems during straight and level travel
2012-08-30
TC 35 Paints and varnishes
ISO/FDIS 15184
* Paints and varnishes — Determi-nation of film hardness by pencil test
2012-08-29
(Revision of ISO 15184:1998)
ISO/FDIS 19840
* Paints and varnishes — Corro-sion protection of steel struc-tures by protective paint systems — Measurement of, and accept-ance criteria for, the thickness of dry films on rough surfaces
2012-08-06
(Revision of ISO 19840:2004)
TC 37 Terminology and other language and content resources
ISO/FDIS 24616.2
* Language resources manage-ment — Multilingual information framework
2012-08-16
TC 38 Textiles
ISO/FDIS 105-A11
* Textiles — Tests for colour fast-ness — Part A11: Determination of colour fastness grades by digital imaging techniques
2012-08-29
TC 41 Pulleys and belts (including veebelts)
ISO/FDIS 1120 * Conveyor belts — Determination of strength of mechanical fasten-ings — Static test method
2012-09-15
(Revision of ISO 1120:2002)
TC 44 Welding and allied processes
ISO/FDIS 8205-3
* Water-cooled secondary connection cables for resist-ance welding — Part 3: Test requirements
2012-08-29
(Revision of ISO 8205-3:1993)
ISO/FDIS 9455-10
* Soft soldering fluxes — Test methods — Part 10: Flux effi-cacy test, solder spread method
2012-08-29
(Revision of ISO 9455-10:1998)
TC 54 Essential oils
ISO/FDIS 1342 * Essential oil of rosemary (Ros-marinus officinalis L.) 2012-08-13
(Revision of ISO 1342:2000)
TC 58 Gas cylinders
ISO Update, Supplement to ISO Focus -- July 2012 11
ISO 7225:2005/FDAmd 1
* Gas cylinders — Precautionary labels — Amendment 1 2012-08-15
TC 61 Plastics
ISO/FDIS 11403-2
* Plastics — Acquisition and presentation of comparable multipoint data — Part 2: Ther-mal and processing properties
2012-08-08
(Revision of ISO 11403-2:2004)
ISO/FDIS 9772 * Cellular plastics — Determina-tion of horizontal burning char-acteristics of small specimens subjected to a small flame
2012-08-19
(Revision of ISO 9772:2001, ISO 9772:2001/Amd 1:2003)
TC 67 Materials, equipment and offshore structures for pe-troleum, petrochemical and natural gas industries
ISO/FDIS 3183 * Petroleum and natural gas indus-tries — Steel pipe for pipeline transportation systems
2012-08-22
(Revision of ISO 3183:2007)
TC 69 Applications of statistical methods
ISO/FDIS 22514-7
* Statistical methods in process management — Capability and performance — Part 7: Capabil-ity of measurement processes
2012-08-28
TC 84 Devices for administration of medicinal products and intravascular catheters
ISO/FDIS 11608-3
* Needle-based injection systems for medical use — Requirements and test methods — Part 3: Finished containers
2012-08-29
(Revision of ISO 11608-3:2000)
ISO/FDIS 11608-5
* Needle-based injection systems for medical use — Requirements and test methods — Part 5: Automated functions
2012-08-29
TC 94 Personal safety -- Pro-tective clothing and equipment
ISO 16602:2007/FDAmd 1
* Protective clothing for protection against chemicals — Classifica-tion, labelling and performance requirements — Amendment 1
2012-08-22
TC 96 Cranes
ISO/FDIS 4306-2
* Cranes — Vocabulary — Part 2: Mobile cranes 2012-08-26
(Revision of ISO 4306-2:1994)
TC 106 Dentistry
ISO 13397-2:2005/FDAmd 1
* Dentistry — Periodontal curettes, dental scalers and excavators — Part 2: Periodontal curettes of Gr-type — Amendment 1: Colour coding
2012-08-29
ISO/FDIS 14457
* Dentistry — Handpieces and motors 2012-08-22
(Revision of ISO 11498:1997, ISO 7785-2:1995, ISO 13294:1997, ISO 7785-1:1997)
ISO/FDIS 21672-2
* Dentistry — Periodontal probes — Part 2: Designation 2012-08-15
ISO/FDIS 12836
* Dentistry — Digitizing devices for CAD/CAM systems for indirect dental restorations — Test meth-ods for assessing accuracy
2012-08-29
TC 108 Mechanical vibration, shock and condition monitoring
ISO/FDIS 13372
* Condition monitoring and diagnostics of machines — Vocabulary
2012-08-26
(Revision of ISO 13372:2004)
TC 118 Compressors and pneu-matic tools, machines and equipment
ISO/FDIS 28927-12
* Hand-held portable power tools — Test methods for evaluation of vibration emission — Part 12: Die grinders
2012-08-22
(Revision of ISO 8662-13:1997, ISO 8662-13:1997/Cor 1:1998)
TC 121 Anaesthetic and respiratory equipment
ISO/FDIS 5361 * Anaesthetic and respiratory equipment — Tracheal tubes and connectors
2012-08-15
(Revision of ISO 5361:1999)
TC 127 Earth-moving machineryISO/FDIS 6165 * Earth-moving machinery —
Basic types — Identification and terms and definitions
2012-08-22
(Revision of ISO 6165:2006)
TC 135 Non-destructive testingISO/FDIS 2400 * Non-destructive testing — Ultra-
sonic testing — Specification for calibration block No. 1
2012-08-15
(Revision of ISO 2400:1972)
TC 150 Implants for surgeryISO/FDIS 14630
* Non-active surgical implants — General requirements 2012-08-29
(Revision of ISO 14630:2008, ISO 14630:2008/DAmd 1)
TC 154 Processes, data ele-ments and documents in commerce, industry and administration
ISO/FDIS 14533-1
* Processes, data elements and documents in commerce, indus-try and administration — Long term signature profiles — Part 1: Long term signature profiles for CMS Advanced Electronic Signatures (CAdES)
2012-08-30
ISO/FDIS 14533-2
* Processes, data elements and documents in commerce, indus-try and administration — Long term signature profiles — Part 2: Long term signature profiles for XML Advanced Electronic Signatures (XAdES)
2012-08-30
TC 159 ErgonomicsISO/FDIS 15535
* General requirements for establishing anthropometric databases
2012-08-22
(Revision of ISO 15535:2006)
TC 172 Optics and photonicsISO/FDIS 9334 * Optics and photonics — Optical
transfer function — Definitions and mathematical relationships
2012-08-21
(Revision of ISO 9334:2007)
12 ISO Update, Supplement to ISO Focus -- July 2012
ISO/FDIS 9335 * Optics and photonics — Optical transfer function — Principles and procedures of measurement
2012-08-21
(Revision of ISO 9335:1995, ISO 9335:1995/Cor 1:2005)
ISO/FDIS 11979-1
* Ophthalmic implants — Intraocu-lar lenses — Part 1: Vocabulary 2012-08-29
(Revision of ISO 11979-1:2006)
ISO 11979-4:2008/FDAmd 1
* Ophthalmic implants — Intraocu-lar lenses — Part 4: Labelling and information — Amendment 1
2012-08-29
TC 173 Assistive products for per-sons with disability
ISO/FDIS 7176-28
* Wheelchairs — Part 28: Require-ments and test methods for stair-climbing devices
2012-08-06
(Revision of ISO 7176-23:2002, ISO 7176-24:2004)
ISO/FDIS 10542-1
* Technical systems and aids for disabled or handicapped persons — Wheelchair tiedown and occupant-restraint systems — Part 1: Requirements and test methods for all systems
2012-08-22
(Revision of ISO 10542-1:2001)
TC 176 Quality management and quality assurance
ISO/FDIS 10004
* Quality management — Custom-er satisfaction — Guidelines for monitoring and measuring
2012-08-30
(Revision of ISO/TS 10004:2010)
ISO/FDIS 10018
* Quality management — Guide-lines on people involvement and competence
2012-08-09
TC 178 Lifts, escalators and mov-ing walks
ISO/FDIS 25745-1
* Energy performance of lifts, escalators and moving walks — Part 1: Energy measurement and verification
2012-08-29
TC 181 Safety of toysISO/FDIS 8124-1
Safety of toys — Part 1: Safety aspects related to mechanical and physical properties
2012-08-21
(Revision of ISO 8124-1:2009)
TC 182 GeotechnicsISO/FDIS 22476-4
* Geotechnical investigation and testing — Field testing — Part 4: Ménard pressuremeter test
2012-09-08
TC 190 Soil qualityISO/FDIS 17155
* Soil quality — Determination of abundance and activity of soil microflora using respiration curves
2012-08-02
(Revision of ISO 17155:2002)
TC 195 Building construction ma-chinery and equipment
ISO/FDIS 15688
* Road construction and main-tenance equipment — Soil stabilizers — Terminology and commercial specifications
2012-08-30
(Revision of ISO 15688:2003)
TC 204 Intelligent transport systems
ISO/FDIS 17261
* Intelligent transport systems — Automatic vehicle and equip-ment identification — Intermodal goods transport architecture and terminology
2012-08-08
(Revision of ISO/TS 17261:2005, ISO/TS 17261:2005/Cor 1:2005)
ISO/FDIS 17262
* Intelligent transport systems — Automatic vehicle and equip-ment identification — Numbering and data structures
2012-08-08
(Revision of ISO/TS 17262:2003)
TC 205 Building environment design
ISO/FDIS 13153
* Framework of the design pro-cess for energy-saving single-family residential and small commercial buildings with the energy consumption ratio as a criterion
2012-08-08
TC 213 Dimensional and geometri-cal product specifications and verification
ISO/FDIS 17450-2
* Geometrical product specifica-tions (GPS) — General concepts — Part 2: Basic tenets, specifi-cations, operators, uncertainties and ambiguities
2012-08-15
(Revision of ISO/TS 17450-2:2002, ISO/TS 17450-2:2002/Cor 1:2004)
TC 215 Health informatics
ISO/FDIS 1828 * Health informatics — Catego-rial structure for classifications and coding systems of surgical procedures
2012-08-15
TC 236 Project Committee: Project Management
ISO/FDIS 21500
* Guidance on project management 2012-08-02
TC 241 Project Committee: Road traffic safety management systems
ISO/FDIS 39001
* Road traffic safety (RTS) man-agement systems - Require-ments with guidance for use
2012-08-02
JTC 1 Information technology
ISO/IEC 14443-4:2008/FDAmd 2.2
* Identification cards — Contact-less integrated circuit cards — Proximity cards — Part 4: Trans-mission protocol — Amendment 2: Bit rates of fc/8, fc/4 and fc/2, protocol activation of PICC Type A and frame size from 512 bytes to 4 096 bytes
2012-08-23
ISO/IEC FDIS 18000-6
* Information technology — Ra-dio frequency identification for item management — Part 6: Parameters for air interface com-munications at 860 MHz to 960 MHz General
2012-08-21
(Revision of ISO/IEC 18000-6:2010)
ISO/IEC FDIS 18000-63
* Information technology — Ra-dio frequency identification for item management — Part 63: Parameters for air interface com-munications at 860 MHz to 960 MHz Type C
2012-08-21
ISO Update, Supplement to ISO Focus -- July 2012 13
Standards published
New International Standards published between 01 June and 30 June 2012
* Available in English only
** French version of standard previously published in English only
Price group
IIW International Institute of Welding
ISO/TR 14345:2012
* Fatigue — Fatigue testing of welded components — Guidance P
TC 2 Fasteners
ISO 4162:2012 Hexagon bolts with flange — Small series — Product grade A with driving feature of product grade B
E
ISO 10642:2004/Amd 1:2012
Hexagon socket countersunk head screws — Amendment 1 XZ
ISO 7720:2012 * Prevailing torque type all-metal hexa-gon nuts, style 2 — Property class 9 B
TC 4 Rolling bearings
ISO 15241:2012
Rolling bearings — Symbols for physi-cal quantities J
ISO 20515:2012
Rolling bearings — Radial bearings, retaining slots — Dimensions and tolerances
D
TC 5 Ferrous metal pipes and metallic fittings
ISO 13470:2012
* Trenchless applications of ductile iron pipes systems — Product design and installation
K
TC 8 Ships and marine technology
ISO 30002:2012
* Ships and marine technology — Ship recycling management systems — Guidelines for selection of ship recy-clers (and pro forma contract)
B
ISO 16437:2012
* Ships and marine technology - Lifesav-ing and fire protection — Atmospheric oil mist detectors for ships
S
ISO 7365:2012 * Shipbuilding and marine structures — Deck machinery — Towing winches for deep sea use
E
ISO 13713:2012
* Ships and marine technology — Ship's mooring and towing fittings — Mooring chocks
E
ISO 13728:2012
* Ships and marine technology — Ship's mooring and towing fittings — Panama chocks
E
ISO 13729:2012
* Ships and marine technology — Ship's mooring and towing fittings — Closed chocks
E
ISO 13733:2012
* Ships and marine technology — Ship's mooring and towing fittings — Univer-sal fairleads with upper roller
J
ISO 13742:2012
* Ships and marine technology — Ship's mooring and towing fittings — Univer-sal fairleads without upper roller
J
ISO 13755:2012
* Ships and marine technology — Ship's mooring and towing fittings — Steel rollers
J
ISO 13767:2012
* Ships and marine technology — Ship's mooring and towing fittings — Ship-side roller fairleads
D
ISO 13776:2012
* Ships and marine technology — Ship's mooring and towing fittings — Pedes-tal fairleads
D
ISO 13795:2012
* Ships and marine technology — Ship's mooring and towing fittings — Welded steel bollards for sea-going vessels
F
ISO 13797:2012
* Ships and marine technology — Ship's mooring and towing fittings — Cruci-form bollards
D
ISO 13798:2012
* Ships and marine technology — Ship's mooring and towing fittings — Re-cessed bitts (Steel plate type)
C
ISO 13799:2012
* Ships and marine technology — Ship's mooring and towing fittings — Re-cessed bitts (Casting type)
D
ISO 614:2012 * Ships and marine technology — Toughened safety glass panes for rectangular windows and side scuttles — Punch method of non-destructive strength testing
B
ISO 1751:2012 * Ships and marine technology — Ships' side scuttles J
ISO 3903:2012 * Ships and marine technology — Ships' ordinary rectangular windows K
ISO 21005:2012
* Ships and marine technology — Ther-mally toughened safety glass panes for windows and side scuttles
C
TC 20 Aircraft and space vehicles
ISO 27471:2012
Aircraft ground equipment — Upper deck loader — Functional requirements F
ISO 26868:2009
* Space data and information transfer systems — Image data compression U
TC 21 Equipment for fire protection and fire fighting
ISO 7240-5:2012
* Fire detection and alarm systems — Part 5: Point-type heat detectors Q
TC 22 Road vehicles
ISO 8854:2012 * Road vehicles — Alternators with regulators — Test methods and general requirements
H
ISO 13400-2:2012
* Road vehicles - Diagnostic communi-cation over Internet Protocol (DoIP) — Part 2: Transport protocol and network layer services
V
ISO 14230-1:2012
* Road vehicles — Diagnostic commu-nication over K-Line (DoK-Line) — Part 1: Physical layer
E
ISO 4138:2012 * Passenger cars — Steady-state circu-lar driving behaviour — Open-loop test methods
K
ISO 12405-2:2012
* Electrically propelled road vehicles — Test specification for lithium-ion trac-tion battery packs and systems — Part 2: High-energy applications
U
TC 23 Tractors and machinery for agri-culture and forestry
ISO 4254-12:2012
Agricultural machinery — Safety — Part 12: Rotary disc and drum mowers and flail mowers
N
14 ISO Update, Supplement to ISO Focus -- July 2012
ISO 17101-1:2012
Agricultural machinery — Thrown-object test and acceptance criteria — Part 1: Rotary mowers
N
ISO 17101-2:2012
Agricultural machinery — Thrown-object test and acceptance criteria — Part 2: Flail mowers
P
TC 24 Particle characterization includ-ing sieving
ISO 13099-1:2012
* Colloidal systems — Methods for zeta-potential determination — Part 1: Electroacoustic and electrokinetic phenomena
N
ISO 13099-2:2012
* Colloidal systems — Methods for zeta-potential determination — Part 2: Optical methods
K
TC 28 Petroleum products and lubricants
ISO 12924:2010/Cor 1:2012
Lubricants, industrial oils and re-lated products (Class L) — Family X (Greases) — Specification — Technical Corrigendum 1
free
ISO 10976:2012
* Refrigerated light hydrocarbon fluids - Measurement of cargoes on board LNG carriers
V
TC 29 Small tools
ISO 9766:2012 Drills with indexable inserts — Cylindri-cal shanks with a parallel flat B
ISO 15917:2012
Solid ball-nosed end mills with cylin-drical shanks, made of carbide and ceramic materials
D
TC 34 Food products
ISO 5530-2:2012
Wheat flour — Physical characteristics of doughs — Part 2: Determination of rheological properties using an extensograph
G
ISO 7513:1990/Amd 1:2012
Instant tea in solid form — Determina-tion of moisture content (loss in mass at 103 degrees C) — Amendment 1
XZ
ISO 6498:2012 Animal feeding stuffs — Guidelines for sample preparation T
TC 35 Paints and varnishes
ISO 9117-6:2012
Paints and varnishes — Drying tests — Part 6: Print-free test B
ISO 13076:2012
Paints and varnishes — Lighting and procedure for visual assessments of coatings
C
ISO 13632:2012
Binders for paints and varnishes — Rosin — Sampling and sample prepa-ration for colour measurement
D
TC 37 Terminology and other language and content resources
ISO 24612:2012
* Language resource management — Linguistic annotation framework (LAF) E
TC 38 Textiles
ISO 6938:2012 Textiles — Natural fibres — Generic names and definitions E
ISO/TR 11827:2012
Textiles — Composition testing — Identification of fibres U
ISO 12027:2012
Textiles — Cotton-fibre stickiness — Detection of sugar by colour reaction D
TC 41 Pulleys and belts (including veebelts)
ISO 9856:2003/Amd 1:2012
Conveyor belts — Determination of elastic and permanent elongation and calculation of elastic modulus — Amendment 1
XZ
TC 42 Photography
ISO 12234-1:2012
* Electronic still-picture imaging — Removable memory — Part 1: Basic removable-memory model
Q
TC 44 Welding and allied processes
ISO 13585:2012
Brazing — Qualification test of brazers and brazing operators J
ISO 15614-13:2012
Specification and qualification of weld-ing procedures for metallic materi-als — Welding procedure test — Part 13: Upset (resistance butt) and flash welding
G
TC 45 Rubber and rubber products
ISO 18898:2012
Rubber — Calibration and verification of hardness testers J
ISO 27588:2012
* Rubber, vulcanized or thermoplastic — Determination of dead-load hardness using the very low rubber hardness (VLRH) scale
E
ISO 4652:2012 * Rubber compounding ingredients — Carbon black — Determination of specific surface area by nitrogen adsorption methods — Single-point procedures
N
ISO 11193-1:2008/Amd 1:2012
* Single-use medical examination gloves — Part 1: Specification for gloves made from rubber latex or rubber solu-tion — Amendment 1
XZ
TC 46 Information and documentation
ISO 13008:2012
* Information and documentation — Digital records conversion and migra-tion process
N
TC 54 Essential oils
ISO 3528:2012 Essential oil of mandarin, Italian type (Citrus reticulata Blanco) E
TC 58 Gas cylinders
ISO 13088:2011
Gas cylinders — Acetylene cylinder bundles — Filling conditions and filling inspection
H
TC 61 Plastics
ISO 1628-1:2009/Amd 1:2012
Plastics — Determination of the viscosity of polymers in dilute solution using capillary viscometers — Part 1: General principles — Amendment 1
XZ
ISO 14322:2012
* Plastics — Epoxy resins — Determi-nation of degree of crosslinking of crosslinked epoxy resins by differential scanning calorimetry
D
TC 69 Applications of statistical methods
ISO 11843-7:2012
* Capability of detection — Part 7: Meth-odology based on stochastic proper-ties of instrumental noise
J
TC 79 Light metals and their alloys
ISO 6362-1:2012
* Wrought aluminium and aluminium al-loys — Extruded rods/bars, tubes and profiles — Part 1: Technical conditions for inspection and delivery
G
ISO Update, Supplement to ISO Focus -- July 2012 15
ISO 6362-2:2012
* Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 2: Mechanical properties
M
ISO 6362-3:2012
* Wrought aluminium and aluminium al-loys — Extruded rods/bars, tubes and profiles — Part 3: Extruded rectangu-lar bars — Tolerances on shape and dimensions
D
ISO 6362-4:2012
* Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 4: Profiles — Toler-ances on shape and dimensions
J
ISO 6362-5:2012
* Wrought aluminium and aluminium al-loys — Extruded rods/bars, tubes and profiles — Part 5: Round, square and hexagonal bars — Tolerances on shape and dimensions
C
ISO 6362-6:2012
* Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 6: Round, square, rectangular and hexagonal tubes — Tolerances on shape and dimensions
H
ISO 6362-7:2012
* Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 7: Chemical composition
C
TC 83 Sports and recreational equipment
ISO 9465:2012 Alpine ski-bindings — Lateral release under impact loading — Test method E
TC 92 Fire safety
ISO 1182:2010 Reaction to fire tests for products — Non-combustibility test P
ISO 1716:2010 Reaction to fire tests for products — Determination of the gross heat of combustion (calorific value)
M
ISO 9239-1:2010
Reaction to fire tests for floorings — Part 1: Determination of the burning behaviour using a radiant heat source
M
ISO 14934-3:2012
Fire tests — Calibration and use of heat flux meters — Part 3: Secondary calibration method
H
ISO/TR 834-3:2012
* Fire-resistance tests — Elements of building construction — Part 3: Com-mentary on test method and guide to the application of the outputs from the fire-resistance test
M
TC 94 Personal safety -- Protective clothing and equipment
ISO 17491-2:2012
Protective clothing — Test methods for clothing providing protection against chemicals — Part 2: Determination of resistance to inward leakage of aero-sols and gases (inward leakage test)
G
ISO/TS 16976-4:2012
* Respiratory protective devices — Hu-man factors — Part 4: Work of breath-ing and breathing resistance: Physi-ologically based limits
H
TC 96 Cranes
ISO 12488-1:2012
* Cranes — Tolerances for wheels and travel and traversing tracks — Part 1: General
K
TC 108 Mechanical vibration, shock and condition monitoring
ISO 21940-14:2012
* Mechanical vibration — Rotor balanc-ing — Part 14: Procedures for assess-ing balance errors
H
ISO/TR 10687:2012
Mechanical vibration-- Description and determination of seated postures with reference to whole-body vibration
L
TC 110 Industrial trucks
ISO 10896-1:2012
* Rough-terrain trucks — Safety re-quirements and verification — Part 1: Variable-reach trucks
S
ISO 11525-1:2012
* Rough-terrain trucks - User require-ments — Part 1: General requirements G
TC 111 Round steel link chains, chain slings, components and accessories
ISO 3076:2012 * Round steel short link chains for general lifting purposes — Medium tolerance sling chains for chain slings — Grade 8
J
TC 119 Powder metallurgy
ISO 2739:2012 Sintered metal bushings — Determina-tion of radial crushing strength B
ISO 22068:2012
* Sintered-metal injection-moulded materials — Specifications F
TC 121 Anaesthetic and respiratory equipment
ISO 8359:1996/Amd 1:2012
Oxygen concentrators for medical use — Safety requirements — Amend-ment 1
XZ
TC 131 Fluid power systems
ISO 10100:2001/Amd 1:2012
Hydraulic fluid power — Cylinders — Acceptance tests — Amendment 1 XZ
TC 135 Non-destructive testing
ISO 9712:2012 Non-destructive testing — Qualification and certification of NDT personnel P
TC 138 Plastics pipes, fittings and valves for the transport of fluids
ISO 16486-1:2012
* Plastics piping systems for the sup-ply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 1: General
K
ISO 16486-2:2012
* Plastics piping systems for the sup-ply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 2: Pipes
F
ISO 16486-3:2012
* Plastics piping systems for the sup-ply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 3: Fittings
J
ISO 16486-5:2012
* Plastics piping systems for the sup-ply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 5: Fitness for purpose of the system
K
ISO 16486-6:2012
* Plastics piping systems for the sup-ply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 6: Code of practice for design, handling and installation
K
ISO 12230:2012
* Polybutene-1 (PB-1) pipes — Effect of time and temperature on the expected strength
E
16 ISO Update, Supplement to ISO Focus -- July 2012
TC 145 Graphical symbols
ISO 3864-3:2012
Graphical symbols — Safety colours and safety signs — Part 3: Design principles for graphical symbols for use in safety signs
P
ISO 7010:2011/Amd 2:2012
Graphical symbols — Safety colours and safety signs — Registered safety signs — Amendment 2
XZ
TC 146 Air quality
ISO 13271:2012
Stationary source emissions — De-termination of PM10/PM2,5 mass concentration in flue gas — Measure-ment at higher concentrations by use of virtual impactors
R
ISO 15202-1:2012
Workplace air — Determination of metals and metalloids in airborne par-ticulate matter by inductively coupled plasma atomic emission spectrometry — Part 1: Sampling
K
ISO 22262-1:2012
Air quality — Bulk materials — Part 1: Sampling and qualitative determina-tion of asbestos in commercial bulk materials
V
ISO 12219-2:2012
* Interior air of road vehicles — Part 2: Screening method for the determina-tion of the emissions of volatile organic compounds from vehicle interior parts and materials — Bag method
G
ISO 12219-3:2012
* Interior air of road vehicles — Part 3: Screening method for the determina-tion of the emissions of volatile organic compounds from vehicle interior parts and materials — Micro-scale chamber method
L
TC 147 Water quality
ISO 6107-2:2006/Amd 1:2012
* Water quality — Vocabulary — Part 2: — Amendment 1 S
ISO 11352:2012
Water quality — Estimation of meas-urement uncertainty based on valida-tion and quality control data
M
ISO 9308-2:2012
* Water quality — Enumeration of Es-cherichia coli and coliform bacteria — Part 2: Most probable number method
S
ISO 10870:2012
Water quality — Guidelines for the selection of sampling methods and devices for benthic macroinvertebrates in fresh waters
M
TC 156 Corrosion of metals and alloys
ISO 17752:2012
Corrosion of metals and alloys — Procedures to determine and estimate runoff rates of metals from materials as a result of atmospheric corrosion
F
TC 159 Ergonomics
ISO/TR 12296:2012
* Ergonomics — Manual handling of people in the healthcare sector X
ISO 9241-410:2008/Amd 1:2012
Ergonomics of human-system interac-tion — Part 410: Design criteria for physical input devices — Amendment 1
XZ
TC 163 Thermal performance and en-ergy use in the built environment
ISO 13791:2012
Thermal performance of buildings — Calculation of internal temperatures of a room in summer without mechanical cooling — General criteria and valida-tion procedures
X
ISO 15927-5:2004/Amd 1:2011
Hygrothermal performance of build-ings — Calculation and presentation of climatic data — Part 5: Data for design heat load for space heating — Amend-ment 1
XZ
TC 164 Mechanical testing of metals
ISO 23788:2012
* Metallic materials — Verification of the alignment of fatigue testing machines P
TC 172 Optics and photonics
ISO 9345-1:2012
* Microscopes — Imaging distances related to mechanical reference planes — Part 1: Tube length 160 mm
C
ISO 17123-6:2012
* Optics and optical instruments — Field procedures for testing geodetic and surveying instruments — Part 6: Rotat-ing lasers
N
TC 173 Assistive products for persons with disability
ISO 10865-1:2012
Wheelchair containment and occu-pant retention systems for accessible transport vehicles designed for use by both sitting and standing passengers — Part 1: Systems for rearward-facing wheelchair-seated passengers
N
TC 181 Safety of toys
ISO 8124-4:2010/Amd 1:2012
* Safety of toys — Part 4: Swings, slides and similar activity toys for indoor and outdoor family domestic use — Amendment 1: Inflatable activity toys
XZ
TC 182 Geotechnics
ISO 22282-1:2012
* Geotechnical investigation and test-ing — Geohydraulic testing — Part 1: General rules
M
ISO 22282-2:2012
* Geotechnical investigation and test-ing — Geohydraulic testing — Part 2: Water permeability tests in a borehole using open systems
N
ISO 22282-3:2012
* Geotechnical investigation and test-ing — Geohydraulic testing — Part 3: Water pressure tests in rock
M
ISO 22282-4:2012
* Geotechnical investigation and test-ing — Geohydraulic testing — Part 4: Pumping tests
M
ISO 22282-5:2012
* Geotechnical investigation and test-ing — Geohydraulic testing — Part 5: Infiltrometer tests
L
ISO 22282-6:2012
* Geotechnical investigation and test-ing — Geohydraulic testing — Part 6: Water permeability tests in a borehole using closed systems
H
TC 184 Automation systems and integration
ISO 8000-2:2012
* Data quality — Part 2: VocabularyD
TC 188 Small craft
ISO 12215-9:2012
Small craft — Hull construction and scantlings — Part 9: Sailing craft appendages
W
TC 190 Soil quality
ISO 15009:2012
Soil quality — Gas chromatographic determination of the content of volatile aromatic hydrocarbons, naphthalene and volatile halogenated hydrocarbons — Purge-and-trap method with thermal desorption
J
ISO Update, Supplement to ISO Focus -- July 2012 17
ISO 11504:2012
Soil quality — Assessment of impact from soil contaminated with petroleum hydrocarbons
L
ISO 12782-1:2012
Soil quality — Parameters for geo-chemical modelling of leaching and speciation of constituents in soils and materials — Part 1: Extraction of amor-phous iron oxides and hydroxides with ascorbic acid
E
ISO 12782-2:2012
Soil quality — Parameters for geo-chemical modelling of leaching and speciation of constituents in soils and materials — Part 2: Extraction of crystalline iron oxides and hydroxides with dithionite
E
ISO 12782-3:2012
Soil quality — Parameters for geo-chemical modelling of leaching and speciation of constituents in soils and materials — Part 3: Extraction of aluminium oxides and hydroxides with ammonium oxalate/oxalic acid
E
ISO 12782-4:2012
Soil quality — Parameters for geo-chemical modelling of leaching and speciation of constituents in soils and materials — Part 4: Extraction of humic substances from solid samples
L
ISO 12782-5:2012
Soil quality — Parameters for geo-chemical modelling of leaching and speciation of constituents in soils and materials — Part 5: Extraction of humic substances from aqueous samples
K
TC 194 Biological evaluation of medical devices
ISO 10993-12:2012
Biological evaluation of medical de-vices — Part 12: Sample preparation and reference materials
K
TC 195 Building construction machinery and equipment
ISO 15643:2002/Amd 1:2012
* Road construction and maintenance equipment — Bituminous binder spreaders/sprayers — Terminology and commercial specifications — Amend-ment 1
XZ
TC 204 Intelligent transport systems
ISO 21210:2012
* Intelligent transport systems — Com-munications access for land mobiles (CALM) — IPv6 Networking
L
TC 205 Building environment design
ISO 16484-1:2010
Building automation and control systems (BACS) — Part 1: Project specification and implementation
M
TC 210 Quality management and cor-responding general aspects for medical devices
ISO 15223-1:2012
Medical devices — Symbols to be used with medical device labels, label-ling and information to be supplied — Part 1: General requirements
L
TC 213 Dimensional and geometrical product specifications and verification
ISO 25178-3:2012
Geometrical product specifications (GPS) — Surface texture: Areal — Part 3: Specification operators
J
TC 215 Health informatics
ISO/TR 13128:2012
* Health Informatics — Clinical docu-ment registry federation E
TC 219 Floor coverings
ISO 14486:2012
* Laminate floor coverings — Specification D
TC 223 Societal security
ISO 22301:2012
* Societal security — Business continuity management systems --- Requirements
M
TC 234 Fisheries and aquaculture
ISO 12878:2012
* Environmental monitoring of the im-pacts from marine finfish farms on soft bottom
P
TC 239 Project Committee: Network services billing
ISO 14452:2012
* Network services billing — Requirements L
TC 244 Industrial furnaces and associ-ated processing equipment
ISO 13577-1:2012
* Industrial furnaces and associated pro-cessing equipment — Safety — Part 1: General requirements
S
TC 250 Project committee: Sustainabil-ity in event management
ISO 20121:2012
Event sustainability management sys-tems — Requirements with guidance for use
S
TMB Technical Management Board
IWA 11:2012 * Guidelines for evaluating cookstove performance C
IULTCS International Union of Leather Technologists and Chemists Societies
ISO 26082-2:2012
Leather — Physical and mechanical test methods for the determination of soiling — Part 2: Tumbling method
D
JTC 1 Information technology
ISO/IEC 21481:2012
* Information technology — Telecom-munications and information exchange between systems — Near Field Com-munication Interface and Protocol -2 (NFCIP-2)
B
ISO/IEC 19770-1:2012
* Information technology — Software as-set management — Part 1: Processes and tiered assessment of conformance
W
ISO/IEC 14888-3:2006/Amd 2:2012
* Information technology — Security techniques — Digital signatures with appendix — Part 3: Discrete logarithm based mechanisms — Amendment 2: Optimizing hash inputs
XZ
ISO/IEC 21117:2012
* Information technology — Office equipment — Copying machines and multi-function devices — Information to be included in specification sheets and related test methods
P
ISO/IEC 24735:2012
* Information technology — Office equipment — Method for measuring digital copying productivity
P
ISO/IEC 14496-22:2009/Amd 2:2012
* Information technology — Coding of audio-visual objects — Part 22: Open Font Format — Amendment 2: Ad-ditional script and language tags
XZ
ISO/IEC 14496-26:2010/Cor 5:2012
* Information technology — Coding of audio-visual objects — Part 26: Audio conformance — Technical Corrigen-dum 5
free
18 ISO Update, Supplement to ISO Focus -- July 2012
Standards confirmed
The following International Standards are confimred for a five year period:
TC 20 Aircraft and space vehicles
ISO 8816:1993 (reconfirmed)
ISO 8843:2005
TC 22 Road vehicles
ISO 4141-4:2009
ISO 4165:2001 (reconfirmed)
ISO 8093:1985 (reconfirmed)
ISO 11452-5:2002 (reconfirmed)
ISO 11452-10:2009
ISO 11748-1:2001 (reconfirmed)
ISO 11748-2:2001 (reconfirmed)
ISO 12098:2004 (reconfirmed)
ISO 15170-1:2001 (reconfirmed)
ISO 15170-2:2001 (reconfirmed)
ISO 26021-3:2009
ISO 26021-4:2009
ISO 26021-5:2009
ISO 3409:1975 (reconfirmed)
TC 23 Tractors and machinery for agricul-ture and forestry
ISO 11785:1996 (reconfirmed)
TC 24 Particle characterization including sieving
ISO 2395:1990 (reconfirmed)
ISO 565:1990 (reconfirmed)
ISO 2194:1991 (reconfirmed)
ISO 2591-1:1988 (reconfirmed)
ISO 3310-2:1999 (reconfirmed)
ISO 3310-3:1990 (reconfirmed)
ISO 4783-3:1981 (reconfirmed)
ISO 9045:1990 (reconfirmed)
TC 29 Small tools
ISO 3466:1975 (reconfirmed)
ISO 3467:1975 (reconfirmed)
TC 34 Food products
ISO 1546:1981 (reconfirmed)
ISO 3727-1:2001 (reconfirmed)
ISO 3727-2:2001 (reconfirmed)
ISO 6785:2001 (reconfirmed)
ISO/TS 9941:2005 (reconfirmed)
ISO 14156:2001 (reconfirmed)
TC 36 Cinematography
ISO 23:1993 (reconfirmed)
ISO 25:1994 (reconfirmed)
ISO 26:1993 (reconfirmed)
ISO 28:1976 (reconfirmed)
ISO 69:1998 (reconfirmed)
ISO 70:1981 (reconfirmed)
ISO 74:1976 (reconfirmed)
ISO 359:1983 (reconfirmed)
ISO 466:1976 (reconfirmed)
ISO 486:1988 (reconfirmed)
ISO 3644:1976 (reconfirmed)
ISO 3820:1978 (reconfirmed)
ISO 5768:1998 (reconfirmed)
ISO 7343:1993 (reconfirmed)
ISO 9568:1993 (reconfirmed)
ISO 9642:1993 (reconfirmed)
ISO 10356:1996 (reconfirmed)
ISO 20859:2005
ISO 22234:2005
TC 42 Photography
ISO 418:2001 (reconfirmed)
ISO 518:2006
ISO 897:2000 (reconfirmed)
ISO 1009:2000 (reconfirmed)
ISO 3622:1996 (reconfirmed)
ISO 3626:1996 (reconfirmed)
ISO 3627:2001 (reconfirmed)
ISO 3629:2000 (reconfirmed)
ISO 4090:2001 (reconfirmed)
ISO 5799:1991 (reconfirmed)
ISO 5800:1987 (reconfirmed)
ISO 5990:2000 (reconfirmed)
ISO 6328:2000 (reconfirmed)
ISO 6516:1980 (reconfirmed)
ISO 6849:1996 (reconfirmed)
ISO 6851:2001 (reconfirmed)
ISO 6853:2001 (reconfirmed)
ISO 7187:1995 (reconfirmed)
ISO 7760:2001 (reconfirmed)
ISO 7829:1986 (reconfirmed)
ISO 8374:2001 (reconfirmed)
ISO 10157:1991 (reconfirmed)
ISO 11312:2000 (reconfirmed)
ISO 13450:1996 (reconfirmed)
ISO 14535:2001 (reconfirmed)
ISO 14546:2000 (reconfirmed)
ISO 14807:2001 (reconfirmed)
ISO 16067-2:2004 (reconfirmed)
ISO 18903:2002 (reconfirmed)
ISO 18904:2000 (reconfirmed)
ISO 18905:2002 (reconfirmed)
ISO 18906:2000 (reconfirmed)
ISO 18908:2000 (reconfirmed)
ISO 18910:2000 (reconfirmed)
ISO 18912:2002 (reconfirmed)
ISO 18915:2000 (reconfirmed)
ISO 18918:2000 (reconfirmed)
ISO 18921:2008
ISO 18923:2000 (reconfirmed)
ISO 18938:2008
ISO 21550:2004 (reconfirmed)
ISO 22028-1:2004 (reconfirmed)
TC 45 Rubber and rubber products
ISO 4661-2:1987 (reconfirmed)
ISO Update, Supplement to ISO Focus -- July 2012 19
ISO 6528-1:1992 (reconfirmed)
ISO 16564:2004 (reconfirmed)
ISO 19004:2004 (reconfirmed)
TC 92 Fire safety
ISO 10295-2:2009
TC 104 Freight containers
ISO 9711-1:1990 (reconfirmed)
TC 107 Metallic and other inorganic coatings
ISO 28706-1:2008
ISO 28706-3:2008
ISO 28721-1:2008
ISO 28721-3:2008
ISO 28723:2008
ISO 28763:2008
TC 114 Horology
ISO 14856:2001 (reconfirmed)
TC 115 Pumps
ISO 15783:2002
TC 121 Anaesthetic and respiratory equipment
ISO 5366-1:2000 (reconfirmed)
ISO 5366-3:2001 (reconfirmed)
TC 127 Earth-moving machinery
ISO 8812:1999 (reconfirmed)
TC 147 Water quality
ISO 8689-1:2000
TC 158 Analysis of gases
ISO 6145-10:2002 (reconfirmed)
ISO 16664:2004 (reconfirmed)
TC 163 Thermal performance and energy use in the built environment
ISO 12241:2008
TC 179 Masonry
ISO 9652-2:2000 (reconfirmed)
ISO 9652-4:2000 (reconfirmed)
ISO 9652-5:2000 (reconfirmed)
TC 211 Geographic information/Geomatics
ISO 6709:2008
JTC 1 Information technology
ISO/IEC 7816-13:2007
ISO/IEC 23360-1:2006
ISO/IEC 23360-2:2006
ISO/IEC 23360-3:2006
ISO/IEC 23360-4:2006
ISO/IEC 23360-5:2006
ISO/IEC 23360-6:2006
ISO/IEC 23360-7:2006
ISO/IEC 23360-8:2006
ISO/IEC 25436:2006
ISO/IEC 18023-2:2006
ISO/IEC 18023-3:2006
ISO/IEC 18042-4:2006
ISO/IEC 23003-1:2007
ISO/IEC 11179-3:2003
ISO/IEC 19784-2:2007
ISO/IEC 19795-2:2007
ISO/IEC 24709-1:2007
ISO/IEC TR 24722:2007
Standards withdrawn
Period from 01 June to 30 June 2012
TC 23 Tractors and machinery for agriculture and forestry
ISO 17101:2004 (replaced by ISO 17101-2:2012, ISO 17101-1:2012)
TC 28 Petroleum products and lubricants
ISO 13398:1997 (replaced by ISO 10976:2012)
TC 35 Paints and varnishes
ISO 3678:1976 (replaced by ISO 9117-6:2012)
TC 45 Rubber and rubber products
ISO 4652-1:1994 (replaced by ISO 4652:2012)
TC 108 Mechanical vibration, shock and condi-tion monitoring
ISO 1940-2:1997 (replaced by ISO 21940-14:2012)
TC 147 Water quality
ISO 7828:1985 (replaced by ISO 10870:2012)
ISO 8265:1988 (replaced by ISO 10870:2012)
ISO 9391:1993 (replaced by ISO 10870:2012)
TC 184 Automation systems and integration
ISO 8000-102:2009
(replaced by ISO 8000-2:2012)
20 ISO Update, Supplement to ISO Focus -- July 2012
Meeting calendar
(update at 01 June 2012)
Meetings called for the month July and after.
* Information definite but meeting not yet formally convened
** Provisional
July 2012
2-6 La Plaine St-Denis (France)
** TC 268 Sustainable develop-ment in communities
6 San Francisco (USA)
TC 180 Solar energy
6 San Francisco (USA)
TC 180/SC 4 Solar energy/Systems - Thermal perfor-mance, reliability and durability
9-10 Shanghai (China) TC 134 Fertilizers and soil conditioners
10-13 Geisenheim-Johannisberg (Germany)
JTC 2 Joint Project Commit-tee - Energy efficiency and renewable energy sources - Common terminology
11 Milan (Italy) * TC 138/SC 7 Plastics pipes, fittings and valves for the transport of fluids/Valves and auxiliary equipment of plastics materials
16-17 Paris (France) JTC 1/SC 37 Information technology/Biometrics
16-17 Golden, Colo-rado (USA)
TC 44/SC 10 Welding and allied processes/Unification of requirements in the field of metal welding
18 Golden, Colo-rado (USA)
TC 44/SC 11 Welding and allied processes/Qualifica-tion requirements for welding and allied processes personnel
19 Berlin (Germany) TC 261 Additive manufacturing
19-20 Golden, Colo-rado (USA)
TC 44 Welding and allied processes
20 Lancaster (USA) TC 43/SC 2 Acoustics/Building acoustics
21 Stockholm (Sweden)
JTC 1/SC 29 Information technol-ogy/Coding of audio, picture, multimedia and hypermedia information
24-25 Beijing (China) TC 255 Biogas
August 2012
22-24 Berlin (Germany) TC 212 Clinical laboratory testing and in vitro di-agnostic test systems
24 Brussels (Belgium)
JTC 1/SC 24 Information technol-ogy/Computer graph-ics, image processing and environmental data representation
27-31 La Plaine St-Denis (France)
JTC 1/SC 35 Information technol-ogy/User interfaces
29 Berlin (Germany) TC 79/SC 5 Light metals and their alloys/Magnesium and alloys of cast or wrought magnesium
September 2012
3-6 Stockholm (Sweden)
TC 110/SC 2 Industrial trucks/Safety of powered industrial trucks
3-7 La Rochelle (France)
TC 163 Thermal performance and energy use in the built environment
4 La Rochelle (France)
TC 163/SC 2 Thermal performance and energy use in the built environment/Cal-culation methods
4-7 Zurich (Switzerland)
TC 172/SC 5 Optics and photon-ics/Microscopes and endoscopes
5 La Rochelle (France)
TC 163/SC 3 Thermal performance and energy use in the built environment/Thermal insulation products
5-7 La Rochelle (France)
TC 205 Building environment design
6 La Rochelle (France)
TC 163/SC 1 Thermal performance and energy use in the built environment/Test and measurement methods
7 Zurich (Switzerland)
TC 142 Cleaning equipment for air and other gases
7-8 Gelendzhik (Rus-sian Federation)
TC 20/SC 8 Aircraft and space vehicles/Aerospace terminology
8-15 Busan (Korea, Republic of)
JTC 1/SC 36 Information tech-nology/Information technology for learn-ing, education and training
10 Milan (Italy) * TC 21/SC 2 Equipment for fire protection and fire fighting/Manu-ally transportable fire extinguishers
10 Milan (Italy) TC 21/SC 3 Equipment for fire protection and fire fighting/Fire detection and alarm systems
10 Milan (Italy) TC 21/SC 6 Equipment for fire protection and fire fighting/Foam and powder media and firefighting systems using foam and powder
10-11 Geneva (Switzerland)
JTC 1/SC 22 Information technol-ogy/Programming languages, their envi-ronments and system software interfaces
10-12 Milan (Italy) * TC 21/SC 5 Equipment for fire protection and fire fighting/Fixed firefighting systems using water
10-12 Moscow (Rus-sian Federation)
TC 150/SC 1 Implants for surgery/Materials
10-12 Zibo city (China) TC 206 Fine ceramics
ISO Update, Supplement to ISO Focus -- July 2012 21
10-12 Zurich (Switzerland)
TC 209 Cleanrooms and as-sociated controlled environments
10-14 Geneva (Switzerland)
JTC 1/SC 25 Information technolo-gy/Interconnection of information technol-ogy equipment
10-14 Nancy (France) TC 108/SC 4 Mechanical vibration, shock and condition monitoring/Human exposure to me-chanical vibration and shock
10-14 Moscow (Rus-sian Federation)
* TC 150 Implants for surgery
10-14 La Plaine St-Denis (France)
TC 153/SC 1 Valves/Design, manu-facture, marking and testing
10-14 Helsinki (Finland) TC 190 Soil quality
11 Moscow (Rus-sian Federation)
TC 150/SC 5 Implants for surgery/Osteosynthesis and spinal devices
11 Moscow (Rus-sian Federation)
TC 150/SC 7 Implants for surgery/Tissue-engineered medical products
11-12 Milan (Italy) TC 21/SC 8 Equipment for fire protection and fire fighting/Gaseous media and firefighting systems using gas
12 Helsinki (Finland) TC 190/SC 1 Soil quality/Evaluation of criteria, terminol-ogy and codification
13 Moscow (Rus-sian Federation)
TC 150/SC 2 Implants for surgery/Cardiovascular im-plants and extracor-poreal systems
13 Moscow (Rus-sian Federation)
* TC 150/SC 4 Implants for sur-gery/Bone and joint replacements
14 Beijing (China) TC 23/SC 6 Tractors and machin-ery for agriculture and forestry/Equipment for crop protection
14 Helsinki (Finland) * TC 190/SC 2 Soil quality/Sampling
17-18 San Diego (USA) TMB Technical Manage-ment Board
17-20 Graz (Austria) JTC 1/SC 6 Information technol-ogy/Telecommunica-tions and information exchange between systems
17-21 Seoul (Korea, Republic of)
** TC 133 Sizing systems and designations for clothes
17-21 Seoul (Korea, Republic of)
TC 133 Sizing systems and designations for clothes
17-21 Stockholm (Sweden)
TC 165 Timber structures
18-20 Berlin (Germany) TC 122 Packaging
19 Berlin (Germany) TC 122/SC 3 Packaging/Perfor-mance requirements and tests for means of packaging, pack-ages and unit loads (as required by ISO/TC 122)
19-20 Rio de Janeiro (Brazil)
TC 67 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries
19-21 San Diego (USA) GA General Assembly
22 San Diego (USA) COUNCIL Council
23-25 Melbourne (Australia)
TC 260 Human resource management
23-26 Vienna (Austria) TC 215 Health informatics
24-25 Sao Paulo (Brazil)
** TC 164/SC 4 Mechanical testing of metals/Toughness testing -- Fracture (F), Pendulum (P), Tear (T)
24-25 Liuyang (China) TC 264 Fireworks
24-26 Sydney (Australia)
TC 54 Essential oils
24-28 Stockholm (Sweden)
JTC 1/SC 38 Information tech-nology/Distributed application platforms and services (DAPS)
24-28 Sandviken (Sweden)
TC 39/SC 2 Machine tools/Test conditions for metal cutting machine tools
24-28 Rotorua (New Zealand)
TC 218 Timber
25-26 Sao Paulo (Brazil)
TC 164/SC 2 Mechanical testing of metals/Ductility testing
25-26 Sao Paulo (Brazil)
TC 164/SC 3 Mechanical testing of metals/Hardness testing
25-27 Sao Paulo (Brazil)
** TC 164/SC 5 Mechanical testing of metals/Fatigue testing
27 Paris (France) * TC 70/SC 8 Internal combus-tion engines/Ex-haust gas emission measurement
27 Sao Paulo (Brazil)
TC 164/SC 1 Mechanical testing of metals/Uniaxial testing
27-28 Paris (France) * TC 58/SC 2 Gas cylinders/Cylin-der fittings
28 Paris (France) TC 70 Internal combustion engines
28 Sao Paulo (Brazil)
TC 164 Mechanical testing of metals
Madrid (Spain) ** TC 213 Dimensional and geometrical product specifications and verification
September-October 2012
30-6 Paris (France) TC 106 Dentistry
3rd Quarter 2012
Frankfurt (Germany)
** TC 184/SC 1 Automation systems and integration/Physi-cal device control
October 2012
1-2 Ottawa (Canada) TC 34/SC 11 Food products/Animal and vegetable fats and oils
1-5 Vienna (Austria) TC 247 Fraud countermeas-ures and controls
3 Ottawa (Canada) TC 34/SC 2 Food products/Ole-aginous seeds and fruits and oilseed meals
22 ISO Update, Supplement to ISO Focus -- July 2012
3-5 New Orleans (USA)
JTC 1/SC 17 Information technol-ogy/Cards and per-sonal identification
4 Paris (France) TC 106/SC 9 Dentistry/Dental CAD/CAM systems
4-5 Sierre (Switzerland)
TC 226 Materials for the production of primary aluminium
5 Berlin (Germany) TC 79/SC 2 Light metals and their alloys/Or-ganic and anodic oxidation coatings on aluminium
6 Chicago (USA) * TC 130 Graphic technology
8 Berlin (Germany) TC 254 Safety of amusement rides and amusement devices
8-10 Castro Verde (Portugal)
TC 183 Copper, lead, zinc and nickel ores and concentrates
8-11 Nagoya (Japan) TC 20/SC 1 Aircraft and space vehicles/Aerospace electrical requirements
8-12 (USA) ** TC 154 Processes, data elements and documents in com-merce, industry and administration
8-12 Moscow (Rus-sian Federation)
* TC 193 Natural gas
9 London (United Kingdom)
* TC 25 Cast irons and pig irons
9-10 Montreal (Canada)
TC 199 Safety of machinery
11 Berlin (Germany) TC 167 Steel and aluminium structures
11-12 Bogota (Colombia)
* CASCO Committee on con-formity assessment
11-12 Tokyo (Japan) * TC 119 Powder metallurgy
11-12 Neubiberg (Germany)
TC 172/SC 6 Optics and photonics/Geodetic and survey-ing instruments
14-18 Tokyo (Japan) ** TC 10/SC 8 Technical prod-uct documenta-tion/Construction documentation
14-19 Tokyo (Japan) TC 59 Buildings and civil engineering works
14-19 Praia do Forte (Brazil)
TC 127 Earth-moving machinery
15-16 Sydney (Australia)
TC 2/SC 7 Fasteners/Reference standards
15-19 Pointe-Claire, Quebec (Canada)
* TC 6 Paper, board and pulps
15-19 Riccione (Italy) * TC 45 Rubber and rubber products
15-19 Riccione (Italy) * TC 45/SC 1 Rubber and rubber products/Hoses (rub-ber and plastics)
15-19 Riccione (Italy) ** TC 45/SC 4 Rubber and rubber products/Products (other than hoses)
15-19 Amsterdam (Netherlands)
TC 146 Air quality
15-19 Moscow (Rus-sian Federation)
** TC 204 Intelligent transport systems
17 Sydney (Australia)
TC 2/SC 14 Fasteners/Surface coatings
17 Jeju (Korea, Republic of)
TC 17/SC 7 Steel/Methods of testing (other than mechanical tests and chemical analysis)
17 Berlin (Germany) * TC 22/SC 9 Road vehicles/Vehicle dynamics and road-holding ability
17 Berlin (Germany) TC 123/SC 2 Plain bearings/Materi-als and lubricants, their properties, characteristics, test methods and testing conditions
17-19 Guilin (China) TC 202 Microbeam analysis
18 Sydney (Australia)
TC 2/SC 12 Fasteners/Fasteners with metric internal thread
18 Riccione (Italy) * TC 45/SC 2 Rubber and rubber products/Testing and analysis
18 Berlin (Germany) TC 83 Sports and recrea-tional equipment
18 Berlin (Germany) * TC 123/SC 6 Plain bearings/Terms and common items
18-19 Jeju (Korea, Republic of)
TC 17 Steel
18-19 Beijing (China) TC 263 Coalbed methane (CBM)
19 Sydney (Australia)
TC 2 Fasteners
19 Sydney (Australia)
TC 2/SC 11 Fasteners/Fasteners with metric external thread
19 Agen (France) * TC 22/SC 5 Road vehicles/Engine tests
19 Agen (France) * TC 22/SC 7 Road vehicles/Injec-tion equipment and filters for use on road vehicles
19 Riccione (Italy) * TC 45/SC 3 Rubber and rubber products/Raw materi-als (including latex) for use in the rubber industry
19 Berlin (Germany) TC 123 Plain bearings
19 Berlin (Germany) TC 123/SC 7 Plain bearings/Spe-cial types of plain bearings
21-26 Sapporo (Japan) TC 92 Fire safety
21-26 Sapporo (Japan) * TC 92/SC 2 Fire safety/Fire containment
22-26 Rome (Italy) * JTC 1/SC 27 Information tech-nology/IT Security techniques
22-26 Messina (Italy) * TC 8 Ships and marine technology
22-26 (Japan) ** TC 181 Safety of toys
22-27 Jeju (Korea, Republic of)
TC 94/SC 15 Personal safety -- Protective clothing and equipment/Respiratory protective devices
ISO Update, Supplement to ISO Focus -- July 2012 23
23 Sydney (Australia)
** TC 138/SC 1 Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for soil, waste and drainage (includ-ing land drainage)
23-25 Arlington (USA) TC 58/SC 3 Gas cylinders/Cylin-der design
23-26 St. Gallen (Switzerland)
TC 172/SC 1 Optics and photon-ics/Fundamental standards
24 Milan (Italy) * TC 12 Quantities and units
24 Sydney (Australia)
** TC 138/SC 2 Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for water supplies
24 Sydney (Australia)
** TC 138/SC 4 Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for the supply of gaseous fuels
25 Sydney (Australia)
** TC 138/SC 3 Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for industrial applications
25 Sydney (Australia)
** TC 138/SC 5 Plastics pipes, fittings and valves for the transport of fluids/General properties of pipes, fittings and valves of plastic materials and their accessories -- Test methods and basic specifications
25 Sydney (Australia)
** TC 138/SC 6 Plastics pipes, fittings and valves for the transport of fluids/Reinforced plastics pipes and fittings for all applications
25 Sydney (Australia)
** TC 138/SC 7 Plastics pipes, fittings and valves for the transport of fluids/Valves and auxiliary equipment of plastics materials
25 Madrid (Spain) TC 216 Footwear
25-26 Arlington (USA) * TC 58 Gas cylinders
25-26 Tampa, Florida (USA)
TC 112 Vacuum technology
25-27 Tampa, Florida (USA)
* TC 201 Surface chemical analysis
26 Chiangmai (Thailand)
* JTC 1/SC 2 Information technol-ogy/Coded character sets
26 Sydney (Australia)
** TC 138 Plastics pipes, fittings and valves for the transport of fluids
30-31 Berlin (Germany) * TC 269 Railway applications
31 La Plaine St-Denis (France)
TC 79/SC 11 Light metals and their alloys/Titanium
(USA) ** TC 36 Cinematography
(France) ** TC 70/SC 7 Internal combustion engines/Tests for lubricating oil filters
Yokohama (Japan)
** TC 119/SC 3 Powder metallurgy/Sampling and testing methods for sintered metal materials (ex-cluding hardmetals)
October-November 2012
29-1 Saitama (Japan) TC 34/SC 17 Food products/Man-agement systems for food safety
31-7 Orlando (USA) * TC 23/SC 18 Tractors and machin-ery for agriculture and forestry/Irrigation and drainage equipment and systems
November 2012
3 San Diego (USA) ** TC 118/SC 6 Compressors and pneumatic tools, machines and equip-ment/Air compressors and compressed air systems
5-8 Warsaw (Poland) * TC 98 Bases for design of structures
5-10 Jeju (Korea, Republic of)
** JTC 1 Information technology
6-8 Tokyo (Japan) * TC 17/SC 1 Steel/Methods of de-termination of chemi-cal composition
6-8 Reykjavik (Iceland)
TC 234 Fisheries and aquaculture
10-17 St. Peters-burg (Russian Federation)
TC 176 Quality management and quality assurance
11-16 Florida (USA) * TC 184/SC 4 Automation systems and integration/Indus-trial data
12-16 Kyoto (Japan) * TC 244 Industrial furnaces and associated pro-cessing equipment
15-16 Xian (China) * TC 227 Springs
16 Atlanta (USA) * TC 17/SC 12 Steel/Continuous mill flat rolled products
26-27 London (United Kingdom)
* TC 44/SC 8 Welding and allied processes/Equip-ment for gas welding, cutting and allied processes
26-30 Florianopolis (Brazil)
* TC 43 Acoustics
26-30 Florianopolis (Brazil)
* TC 43/SC 1 Acoustics/Noise
27-29 Washington, D.C (USA)
* TC 20 Aircraft and space vehicles
Wiesbaden (Germany)
** TC 67/SC 3 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Drilling and comple-tion fluids, and well cements
(Mexico) ** TC 229 Nanotechnologies
December 2012
3-4 London (United Kingdom)
** TC 159/SC 4 Ergonomics/Ergo-nomics of human-system interaction
24 ISO Update, Supplement to ISO Focus -- July 2012
3-5 Rome (Italy) * TC 147/SC 3 Water quality/Radio-logical methods
3-7 (Kenya) ** TC 223 Societal security
11-12 Jeddah (Saudi Arabia)
* TC 211 Geographic in-formation/Geomatics
13-14 Bangkok (Thailand)
** TC 221 Geosynthetics
4th Quarter 2012
(United Kingdom)
** TC 157 Non-systemic con-traceptives and STI barrier prophylactics
January 2013
7-12 London (United Kingdom)
* TC 121/SC 3 Anaesthetic and res-piratory equipment/Lung ventilators and related equipment
23-24 Rio de Janeiro (Brazil)
** TC 67/SC 7 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Offshore structures
(Unknown) ** TC 34/SC 16 Food products/Hori-zontal methods for molecular biomarker analysis
(Australia) ** TC 248 Project committee: Sustainability criteria for bioenergy
February 2013
4-8 St. Gallen (Switzerland)
* TC 94/SC 13 Personal safety -- Protective clothing and equipment/Pro-tective clothing
4-9 London (United Kingdom)
* TC 58/SC 4 Gas cylinders/Opera-tional requirements for gas cylinders
February-March 2013
25-1 (Korea, Repub-lic of)
** JTC 1/SC 35 Information technol-ogy/User interfaces
March 2013
19-22 Jeju (Korea, Republic of)
* TC 107 Metallic and other inorganic coatings
27-28 Geneva (Switzerland)
* COUNCIL Council
(Europe) ** TC 161 Control and protec-tive devices for gas and/or oil burners and appliances
April 2013
8-11 Helsinki (Finland) * TC 117 Fans
8-12 Madrid (Spain) * JTC 1/SC 38 Information tech-nology/Distributed application platforms and services (DAPS)
17-18 Xian (China) * TC 67/SC 2 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Pipeline transporta-tion systems
22-26 Berlin (Germany) TC 108/SC 5 Mechanical vibration, shock and condition monitoring/Condition monitoring and diag-nostics of machines
23-24 Dresden (Germany)
** TC 219 Floor coverings
Paris (France) ** TC 29/SC 5 Small tools/Grinding wheels and abrasives
Salzburg (Austria)
** TC 89 Wood-based panels
Shenzen (China) ** TC 130 Graphic technology
(USA) ** TC 178 Lifts, escalators and moving walks
(South Africa) ** TC 242 Energy Management
May 2013
13-16 Chicago (USA) ** TC 195 Building construc-tion machinery and equipment
13-16 Chicago (USA) ** TC 195/SC 1 Building construc-tion machinery and equipment/Machinery and equipment for concrete work
13-17 (Italy) ** TC 29 Small tools
13-17 (Italy) ** TC 29/SC 8 Small tools/Tools for pressing and moulding
13-17 Guangzhou (China)
* TC 68 Financial services
13-17 Guangzhou (China)
* TC 68/SC 2 Financial services/Financial Services, security
13-17 Tokyo (Japan) ** TC 114 Horology
27-31 Shanghai (China) * TC 4 Rolling bearings
(China) ** TC 10 Technical product documentation
Paris (France) ** TC 46/SC 11 Information and doc-umentation/Archives/records management
(Unknown) ** TC 158 Analysis of gases
June 2013
3-4 Berlin (Germany) ** TC 44/SC 3 Welding and allied processes/Welding consumables
3-7 Washington, D.C (USA)
* TC 39/SC 2 Machine tools/Test conditions for metal cutting machine tools
5 Prague (Czech Republic)
** TC 115 Pumps
10-14 Sydney (Australia)
* REMCO Committee on refer-ence materials
17-21 Shanghai (China) ** TC 121 Anaesthetic and res-piratory equipment
19-20 London (United Kingdom)
** TC 22/SC 3 Road vehicles/Elec-trical and electronic equipment
Washington, D.C (USA)
** TC 67/SC 3 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Drilling and comple-tion fluids, and well cements
Paris (France) ** TC 86/SC 6 Refrigeration and air-conditioning/Testing and rating of air-conditioners and heat pumps
ISO Update, Supplement to ISO Focus -- July 2012 25
2nd Quarter 2013
(Canada) ** TC 34/SC 4 Food products/Cere-als and pulses
August 2013
26-30 (Canada) ** JTC 1/SC 35 Information technol-ogy/User interfaces
September 2013
18-20 St. Peters-burg (Russian Federation)
* GA General Assembly
21 St. Peters-burg (Russian Federation)
* COUNCIL Council
Paris (France) ** TC 17/SC 16 Steel/Steels for the reinforcement and prestressing of concrete
(Unknown) ** TC 21 Equipment for fire protection and fire fighting
Victoria (Canada) ** TC 33 Refractories
(Korea, Repub-lic of)
** TC 123/SC 2 Plain bearings/Materi-als and lubricants, their properties, characteristics, test methods and testing conditions
(Korea, Repub-lic of)
** TC 123/SC 3 Plain bearings/Dimen-sions, tolerances and construction details
(Korea, Repub-lic of)
** TC 123/SC 5 Plain bearings/Quality analysis and assurance
(Korea, Repub-lic of)
** TC 123/SC 6 Plain bearings/Terms and common items
(Korea, Repub-lic of)
** TC 123/SC 7 Plain bearings/Spe-cial types of plain bearings
Tokyo (Japan) ** TC 142 Cleaning equipment for air and other gases
October 2013
7 Istanbul (Turkey) ** TC 38/SC 1 Textiles/Tests for coloured textiles and colorants
7-11 Istanbul (Turkey) ** TC 38 Textiles
8 Istanbul (Turkey) ** TC 38/SC 2 Textiles/Cleansing, finishing and water resistance tests
9 Istanbul (Turkey) ** TC 38/SC 23 Textiles/Fibres and yarns
10 Istanbul (Turkey) ** TC 38/SC 24 Textiles/Condition-ing atmospheres and physical tests for textile fabrics
11 Garching (Germany)
** TC 60 Gears
11 Garching (Germany)
** TC 60/SC 1 Gears/Nomenclature and wormgearing
11 Garching (Germany)
** TC 60/SC 2 Gears/Gear capacity calculation
14-15 Miami (USA) ** TC 44/SC 3 Welding and allied processes/Welding consumables
21-26 Berlin (Germany) * TC 147 Water quality
Sarajevo (Bosnia and Herzegovina)
** TC 34/SC 12 Food products/Sen-sory analysis
(France) ** TC 111/SC 1 Round steel link chains, chain slings, components and ac-cessories/Chains and chain slings
Berlin (Germany) ** TC 172/SC 7 Optics and photon-ics/Ophthalmic optics and instruments
Beijing (China) ** TC 184/SC 2 Automation systems and integration/Robots and robotic devices
(Japan) ** TC 206 Fine ceramics
November 2013
10 Okinawa (Japan) ** TC 201 Surface chemical analysis
10-15 Mexico (Mexico) * TC 113 Hydrometry
(France) ** JTC 1 Information technology
4th Quarter 2013
(Korea, Repub-lic of)
** TC 106 Dentistry
Gaithersburg (USA)
** TC 172/SC 9 Optics and photon-ics/Electro-optical systems
Month unknown 2013
(South Africa) ** TC 27 Solid mineral fuels
(South Africa) ** TC 37 Terminology and other language and content resources
(Unknown) ** TC 38/SC 1 Textiles/Tests for coloured textiles and colorants
(South Africa) ** TC 44 Welding and allied processes
Porto de Galin-has (Brazil)
** TC 135/SC 9 Non-destructive test-ing/Acoustic emission testing
(Norway) ** TC 138/SC 1 Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for soil, waste and drainage (includ-ing land drainage)
(Brazil) ** TC 155 Nickel and nickel alloys
(Sweden) ** TC 163 Thermal performance and energy use in the built environment
Amsterdam (Netherlands)
** TC 164/SC 5 Mechanical testing of metals/Fatigue testing
(Unknown) ** TC 173/SC 2 Assistive products for persons with disabil-ity/Classification and terminology
(South Africa) ** TC 202 Microbeam analysis
(Sweden) ** TC 205 Building environment design
(Portugal) ** TC 228 Tourism and related services