ita bc fnd… · web viewi19 diagnose and repair power take-offs and transfer cases diagnose and...
TRANSCRIPT
WORKSHEET FOR BLENDED LEARNING DESIGN
HEAVY MECHANICAL TRADES FOUNDATION and LEVELS 1 TO 4
What to consider when moving your trades course online:
One of the greatest challenges is trying to determine how to teach and assess the practical components of a trades program in an online or blended program. The purpose of this worksheet is to provide you with the essential practical components of the Program Outline that need to be taught and assessed. With this information, you can determine which components can be taught and assessed online and which need to be taught and assessed in a shop environment.
If needed, Achievement Criteria can also be used by employer mentors to assess their apprentices’ performance of key practical activities on the job.
1) What are the essential practical competencies that need to be covered and assessed? (Achievement Criteria)
Achievement Criteria define observable performance expectations for competencies. They are found in the Program Outline and are used to identify which practical/shop/lab activities are essential and need to be graded. In addition, Achievement Criteria provide criteria that the performance should be graded against.
2) Do all competencies have Achievement Criteria?
No. Some competencies are covered as theory-only in technical training, and some competencies have practical components that aren’t graded. Engaging in a hands-on activity is an important part of learning and doesn’t always require grading. The instructor and industry subject matter experts who develop the Program Outlines select which practical activities warrant Achievement Criteria for each level.
3) How do I use this information?
All essential practical competencies have been identified below. When designing your blended learning course, you need to consider what can be taught online and what needs shop time to teach. You also need to consider which practical activities can be assessed online, in the shop, or where you can possibly have apprentice employer sponsors assist.
Worksheet for Blended Learning Design
HMT FOUNDATION + LEVELS 1 TO 4 (May,2020)
SAMPLE Essential Practical Competencies
For each Essential Practical Competency, decide which learning tasks can be taught online or must be in the shop. For each Practical Activity Assessment (Achievement Criteria), decide what can be assessed online, requires shop hours to as-
sess or can be assessed with the assistance of an employer sponsor. Use the Learning Task columns to determine which learning tasks are needed to teach the competencies. This can be used if
needed for planning hours or online content.
THIS IS A COMPLETED SAMPLE
(Training Provider completes all columns with red font – this is a sample based on instructor input)
AST HL ONE TEACH ASSESS
Essential Practical Competencies
Theoretical Learning Tasks
(OPTIONAL)
Practical Learning Tasks
(OPTIONAL)
Taught online or in the shop?
Practical Activity to Assess
(Achievement Criteria)
Evaluation Criteria for Practical Activity
Practical Evaluation Online, Shop or Employer assisted?
% Practical Assessment Weighting
Shop hours needed for teaching and evaluating
A2 Use personal protective equipment (PPE) and safety
A2.1 Describe personal safety
A2.2 Describe
Online Wear PPE as needed for each task
PPE selection PPE fit Consistency of
usage
Grade/observe PPE usage with each practical
7 0
Worksheet for Blended Learning Design
HMT FOUNDATION + LEVELS 1 TO 4 (May,2020)
AST HL ONE TEACH ASSESS
Essential Practical Competencies
Theoretical Learning Tasks
(OPTIONAL)
Practical Learning Tasks
(OPTIONAL)
Taught online or in the shop?
Practical Activity to Assess
(Achievement Criteria)
Evaluation Criteria for Practical Activity
Practical Evaluation Online, Shop or Employer assisted?
% Practical Assessment Weighting
Shop hours needed for teaching and evaluating
equipment shop emergency equipment and procedures
task assessed
I1 Diagnose and repair basic wiring and electrical sys-tems
I1.1 Describe electrical funda-mentals
I1.2 Describe electrical circuits and components
I1.3 Read and interpret wiring diagramsI1.4 Service and repair wiringI1.5 Use elec-trical test equip-mentI1.6 Use scan tools
In shop Perform electrical measurements on circuits
Safety Tool usage Procedures Accuracy of
results
In shop 16.5 15
K1 Diagnose and repair steering and control sys-tems
K1.1 Describe steering columnsK1.11 Describe power steering
K1.2 Inspect steering columns
Perform a steer-ing inspection
Safety Testing proced-
ure Accuracy of
results
Online (ap-prentice video?)
11.25 0
K1 Diagnose and K1.1 Describe K1.4 Remove Online Remove and re- Safety Employer As- 7.5 0
Worksheet for Blended Learning Design
HMT FOUNDATION + LEVELS 1 TO 4 (May,2020)
AST HL ONE TEACH ASSESS
Essential Practical Competencies
Theoretical Learning Tasks
(OPTIONAL)
Practical Learning Tasks
(OPTIONAL)
Taught online or in the shop?
Practical Activity to Assess
(Achievement Criteria)
Evaluation Criteria for Practical Activity
Practical Evaluation Online, Shop or Employer assisted?
% Practical Assessment Weighting
Shop hours needed for teaching and evaluating
repair steering and control sys-tems
steering columns
and replace steering wheel air bag inflator module
install an air bag inflator module
Procedure Tool usage Completion of
task
sisted
Worksheet for Blended Learning Design
HMT FOUNDATION + LEVELS 1 TO 4 (May,2020)
Heavy Mechanical Trades Foundation
Essential Practical Competencies For each Essential Practical Competency, decide which learning tasks can be taught online or must be in the shop. For each Practical Activity Assessment (Achievement Criteria), decide what can be assessed online, requires a shop hours to
assess or can be assessed with the assistance of an employer sponsor. Use the Learning Task columns to determine which learning tasks are needed to teach the competencies. This can be used if
needed for planning hours or online content.
HMT FOUNDATION TEACH ASSESS
Essential Practical Competencies
Theoretical Learning Tasks
(OPTIONAL)
Practical Learning Tasks
(OPTIONAL)
Taught online or in the shop?
Practical Activity to Assess
(Achievement Criteria)
Evaluation Criteria for Practical Activity
Practical Evaluation Online, Shop or Employer assisted?
% Practical Assessment Weightin
g*
Shop hours needed for teaching and evaluating
* All % Based on Practical Time Allocations. Please Adjust as Needed.
Worksheet for Blended Learning Design
HMT FOUNDATION + LEVELS 1 TO 4 (May,2020)
HMT FOUNDATION TEACH ASSESS
Essential Practical Competencies
Theoretical Learning Tasks
(OPTIONAL)
Practical Learning Tasks
(OPTIONAL)
Taught online or in the shop?
Practical Activity to Assess
(Achievement Criteria)
Evaluation Criteria for Practical Activity
Practical Evaluation Online, Shop or Employer assisted?
% Practical Assessment Weightin
g*
Shop hours needed for teaching and evaluating
LINE B 23%
B1 Service and Repair Hydraulic Brakes
Service and Repair Hydraulic Brakes
Follow safe work practices through-out entire task in-cluding lock out procedures
Conduct in a lo-gical manner
Conduct according to manufacturer’s specifications
Conduct according to work place re-quirements
7.66%
B2 Service and Repair Hy-draulic Power Brakes
Service and Repair Hy-draulic Power Brakes
Follow safe work practices through-out entire task in-cluding lock out procedures
7.66%
Worksheet for Blended Learning Design
HMT FOUNDATION + LEVELS 1 TO 4 (May,2020)
HMT FOUNDATION TEACH ASSESS
Essential Practical Competencies
Theoretical Learning Tasks
(OPTIONAL)
Practical Learning Tasks
(OPTIONAL)
Taught online or in the shop?
Practical Activity to Assess
(Achievement Criteria)
Evaluation Criteria for Practical Activity
Practical Evaluation Online, Shop or Employer assisted?
% Practical Assessment Weightin
g*
Shop hours needed for teaching and evaluating
Conduct in a lo-gical manner
Conduct according to manufacturer’s specifications
Conduct according to work place re-quirements
B3 Service and Repair Air Brakes
Service and Repair Air Brakes
Follow safe work practices through-out entire task in-cluding lock out procedures
Conduct in a lo-gical manner
Conduct according to manufacturer’s specifications
Conducted accord-ing to work place
7.66%
Worksheet for Blended Learning Design
HMT FOUNDATION + LEVELS 1 TO 4 (May,2020)
HMT FOUNDATION TEACH ASSESS
Essential Practical Competencies
Theoretical Learning Tasks
(OPTIONAL)
Practical Learning Tasks
(OPTIONAL)
Taught online or in the shop?
Practical Activity to Assess
(Achievement Criteria)
Evaluation Criteria for Practical Activity
Practical Evaluation Online, Shop or Employer assisted?
% Practical Assessment Weightin
g*
Shop hours needed for teaching and evaluating
requirements
LINE C 11%
C2 Service Hy-draulic Com-ponents
Service Hy-draulic Com-ponents
Follow safe work practices through-out entire task in-cluding lock out procedures
Conduct in a lo-gical manner
Conduct according to manufacturer’s specifications
Conduct according to work place re-quirements
11%
LINE D 19%
D3 Service and Service and Follow safe work 4.75%
Worksheet for Blended Learning Design
HMT FOUNDATION + LEVELS 1 TO 4 (May,2020)
HMT FOUNDATION TEACH ASSESS
Essential Practical Competencies
Theoretical Learning Tasks
(OPTIONAL)
Practical Learning Tasks
(OPTIONAL)
Taught online or in the shop?
Practical Activity to Assess
(Achievement Criteria)
Evaluation Criteria for Practical Activity
Practical Evaluation Online, Shop or Employer assisted?
% Practical Assessment Weightin
g*
Shop hours needed for teaching and evaluating
Diagnose Bat-teries
Diagnose Bat-teries
practices through-out entire task in-cluding lock out procedures
Conduct in a lo-gical manner
Conduct according to manufacturer’s specifications
Conduct according to work place re-quirements
D4 Service Charging Sys-tems
Service Char-ging Systems
Follow safe work practices through-out entire task in-cluding lock out procedures
Conduct in a lo-gical manner
Conduct according to manufacturer’s
4.75%
Worksheet for Blended Learning Design
HMT FOUNDATION + LEVELS 1 TO 4 (May,2020)
HMT FOUNDATION TEACH ASSESS
Essential Practical Competencies
Theoretical Learning Tasks
(OPTIONAL)
Practical Learning Tasks
(OPTIONAL)
Taught online or in the shop?
Practical Activity to Assess
(Achievement Criteria)
Evaluation Criteria for Practical Activity
Practical Evaluation Online, Shop or Employer assisted?
% Practical Assessment Weightin
g*
Shop hours needed for teaching and evaluating
specifications Conduct according
to work place re-quirements
D6 Service Starting Sys-tems
Service Start-ing Systems
Follow safe work practices through-out entire task in-cluding lock out procedures
Conduct in a lo-gical manner
Conduct according to manufacturer’s specifications
Conduct according to work place re-quirements
4.75%
D8 Service Electrical Cir-
Service Elec- Follow safe work 4.75%
Worksheet for Blended Learning Design
HMT FOUNDATION + LEVELS 1 TO 4 (May,2020)
HMT FOUNDATION TEACH ASSESS
Essential Practical Competencies
Theoretical Learning Tasks
(OPTIONAL)
Practical Learning Tasks
(OPTIONAL)
Taught online or in the shop?
Practical Activity to Assess
(Achievement Criteria)
Evaluation Criteria for Practical Activity
Practical Evaluation Online, Shop or Employer assisted?
% Practical Assessment Weightin
g*
Shop hours needed for teaching and evaluating
cuits trical Circuits
practices through-out entire task in-cluding lock out procedures
Conduct in a lo-gical manner
Conduct according to manufacturer’s specifications
Conduct according to work place re-quirements
LINE E 28%E1 Service and Diagnose Tires, Wheels, and Hubs
Service and Diagnose Tires, Wheels, and Hubs
Follow safe work practices through-out entire task in-cluding lock out procedures
Conduct in a lo-gical manner
Conduct according
7%
Worksheet for Blended Learning Design
HMT FOUNDATION + LEVELS 1 TO 4 (May,2020)
HMT FOUNDATION TEACH ASSESS
Essential Practical Competencies
Theoretical Learning Tasks
(OPTIONAL)
Practical Learning Tasks
(OPTIONAL)
Taught online or in the shop?
Practical Activity to Assess
(Achievement Criteria)
Evaluation Criteria for Practical Activity
Practical Evaluation Online, Shop or Employer assisted?
% Practical Assessment Weightin
g*
Shop hours needed for teaching and evaluating
to manufacturer’s specifications
Conduct according to work place re-quirements
E2 Service Steering Sys-tems
Service Steer-ing Systems
Follow safe work practices through-out entire task in-cluding lock out procedures
Conduct in a lo-gical manner
Conduct according to manufacturer’s specifications
Conduct according to work place re-quirements
7%
E4 Service, Diagnose and
Service, Dia-gnose and Re-
Follow safe work practices through-
7%
Worksheet for Blended Learning Design
HMT FOUNDATION + LEVELS 1 TO 4 (May,2020)
HMT FOUNDATION TEACH ASSESS
Essential Practical Competencies
Theoretical Learning Tasks
(OPTIONAL)
Practical Learning Tasks
(OPTIONAL)
Taught online or in the shop?
Practical Activity to Assess
(Achievement Criteria)
Evaluation Criteria for Practical Activity
Practical Evaluation Online, Shop or Employer assisted?
% Practical Assessment Weightin
g*
Shop hours needed for teaching and evaluating
Repair Suspen-sion Systems
pair Suspen-sion Systems
out entire task in-cluding lock out procedures
Conduct in a lo-gical manner
Conduct according to manufacturer’s specifications
Conduct according to work place re-quirements
E6 Diagnose and Repair Frames
Diagnose and Repair Frames
Follow safe work practices through-out entire task in-cluding lock out procedures
Conduct in a lo-gical manner
Conduct according to manufacturer’s specifications
Conduct according
7%
Worksheet for Blended Learning Design
HMT FOUNDATION + LEVELS 1 TO 4 (May,2020)
HMT FOUNDATION TEACH ASSESS
Essential Practical Competencies
Theoretical Learning Tasks
(OPTIONAL)
Practical Learning Tasks
(OPTIONAL)
Taught online or in the shop?
Practical Activity to Assess
(Achievement Criteria)
Evaluation Criteria for Practical Activity
Practical Evaluation Online, Shop or Employer assisted?
% Practical Assessment Weightin
g*
Shop hours needed for teaching and evaluating
to work place re-quirements
LINE F 11%
F1 Service Landing Gear and Trailer Ac-cessories
Service Land-ing Gear and Trailer Ac-cessories
Follow safe work practices through-out entire task in-cluding lock out procedures
Conduct in a lo-gical manner
Conduct according to manufacturer’s specifications
Conduct according to work place re-quirements
2.75%
F2 Service and Repair Coupling Systems
Service and Repair Coup-ling Systems
Follow safe work practices through-out entire task in-
2.75%
Worksheet for Blended Learning Design
HMT FOUNDATION + LEVELS 1 TO 4 (May,2020)
HMT FOUNDATION TEACH ASSESS
Essential Practical Competencies
Theoretical Learning Tasks
(OPTIONAL)
Practical Learning Tasks
(OPTIONAL)
Taught online or in the shop?
Practical Activity to Assess
(Achievement Criteria)
Evaluation Criteria for Practical Activity
Practical Evaluation Online, Shop or Employer assisted?
% Practical Assessment Weightin
g*
Shop hours needed for teaching and evaluating
cluding lock out procedures
Conduct in a lo-gical manner
Conduct according to manufacturer’s specifications
Conduct according to work place re-quirements
F3 Service, Dia-gnose and Re-pair Trailer Body Compon-ents
Service, Dia-gnose and Re-pair Trailer Body Compon-ents
Follow safe work practices through-out entire task in-cluding lock out procedures
Conduct in a lo-gical manner
Conduct according to manufacturer’s specifications
Conduct according
2.75%
Worksheet for Blended Learning Design
HMT FOUNDATION + LEVELS 1 TO 4 (May,2020)
HMT FOUNDATION TEACH ASSESS
Essential Practical Competencies
Theoretical Learning Tasks
(OPTIONAL)
Practical Learning Tasks
(OPTIONAL)
Taught online or in the shop?
Practical Activity to Assess
(Achievement Criteria)
Evaluation Criteria for Practical Activity
Practical Evaluation Online, Shop or Employer assisted?
% Practical Assessment Weightin
g*
Shop hours needed for teaching and evaluating
to work place re-quirements
F4 Service, Dia-gnose and Re-pair Heating and Refrigera-tion Systems
Service, Dia-gnose and Re-pair Heating and Refrigera-tion Systems
Follow safe work practices through-out entire task in-cluding lock out procedures
Conduct in a lo-gical manner
Conduct according to manufacturer’s specifications
Conducted accord-ing to work place requirements
2.75%
LINE G 6%G2 Diagnose and Repair
Diagnose and Repair Heating
Follow safe work practices through-
6%
Worksheet for Blended Learning Design
HMT FOUNDATION + LEVELS 1 TO 4 (May,2020)
HMT FOUNDATION TEACH ASSESS
Essential Practical Competencies
Theoretical Learning Tasks
(OPTIONAL)
Practical Learning Tasks
(OPTIONAL)
Taught online or in the shop?
Practical Activity to Assess
(Achievement Criteria)
Evaluation Criteria for Practical Activity
Practical Evaluation Online, Shop or Employer assisted?
% Practical Assessment Weightin
g*
Shop hours needed for teaching and evaluating
Heating and Air Conditioning Systems
and Air Condi-tioning Sys-tems
out entire task in-cluding lock out procedures
Conduct in a lo-gical manner
Conduct according to manufacturer’s specifications
Conduct according to work place re-quirements
LINE J 2%J2 Service Cab Structures
Service Cab Structures
Follow safe work practices through-out entire task in-cluding lock out procedures
Conduct in a lo-gical manner
Conduct according to manufacturer’s
2%
Worksheet for Blended Learning Design
HMT FOUNDATION + LEVELS 1 TO 4 (May,2020)
HMT FOUNDATION TEACH ASSESS
Essential Practical Competencies
Theoretical Learning Tasks
(OPTIONAL)
Practical Learning Tasks
(OPTIONAL)
Taught online or in the shop?
Practical Activity to Assess
(Achievement Criteria)
Evaluation Criteria for Practical Activity
Practical Evaluation Online, Shop or Employer assisted?
% Practical Assessment Weightin
g*
Shop hours needed for teaching and evaluating
specifications Conduct according
to work place re-quirements
Worksheet for Blended Learning Design
HMT FOUNDATION + LEVELS 1 TO 4 (May,2020)
Heavy Mechanical Trades Level 1
Essential Practical Competencies For each Essential Practical Competency, decide which learning tasks can be taught online or must be in the shop. For each Practical Activity Assessment (Achievement Criteria), decide what can be assessed online, requires a shop hours to
assess or can be assessed with the assistance of an employer sponsor. Use the Learning Task columns to determine which learning tasks are needed to teach the competencies. This can be used if
needed for planning hours or online content.
HMT LEVEL ONE TEACH ASSESS
Essential Practical Competencies
Theoretical Learning Tasks
(OPTIONAL)
Practical Learning Tasks
(OPTIONAL)
Taught online or in the shop?
Practical Activity to Assess
(Achievement Criteria)
Evaluation Criteria for Practical Activity
Practical Evaluation Online, Shop or Employer assisted?
% Practical Assessment Weighting
*
Shop hours needed for teaching and evaluating
LINE A 10%
* LINE A Has NO
Achievement Criteria. Please Use
Suitable Assignmen
t at
Worksheet for Blended Learning Design
HMT FOUNDATION + LEVELS 1 TO 4 (May,2020)
HMT LEVEL ONE TEACH ASSESS
Essential Practical Competencies
Theoretical Learning Tasks
(OPTIONAL)
Practical Learning Tasks
(OPTIONAL)
Taught online or in the shop?
Practical Activity to Assess
(Achievement Criteria)
Evaluation Criteria for Practical Activity
Practical Evaluation Online, Shop or Employer assisted?
% Practical Assessment Weighting
*
Shop hours needed for teaching and evaluating
Instructor's
Discretion.
LINE B 19%
B1 Service and Repair Hydraulic Brakes
Service and Repair Hydraulic Brakes
Follow safe work practices through-out entire task in-cluding lock out procedures
Conduct in a lo-gical manner
Conduct accord-ing to manufac-turer’s specifica-tions
Conduct accord-ing to work place requirements
6.33%
Worksheet for Blended Learning Design
HMT FOUNDATION + LEVELS 1 TO 4 (May,2020)
HMT LEVEL ONE TEACH ASSESS
Essential Practical Competencies
Theoretical Learning Tasks
(OPTIONAL)
Practical Learning Tasks
(OPTIONAL)
Taught online or in the shop?
Practical Activity to Assess
(Achievement Criteria)
Evaluation Criteria for Practical Activity
Practical Evaluation Online, Shop or Employer assisted?
% Practical Assessment Weighting
*
Shop hours needed for teaching and evaluating
B2 Service and Repair Hydraulic Power Brakes
Service and Repair Hydraulic Power Brakes
Follow safe work practices through-out entire task in-cluding lock out procedures
Conduct in a lo-gical manner
Conduct accord-ing to manufac-turer’s specifica-tions
Conduct accord-ing to work place requirements
6.33%
B3 Service and Repair Air Brakes
Service and Repair Air Brakes
Follow safe work practices through-out entire task in-cluding lock out procedures
Conduct in a lo-gical manner
Conduct accord-
6.33%
Worksheet for Blended Learning Design
HMT FOUNDATION + LEVELS 1 TO 4 (May,2020)
HMT LEVEL ONE TEACH ASSESS
Essential Practical Competencies
Theoretical Learning Tasks
(OPTIONAL)
Practical Learning Tasks
(OPTIONAL)
Taught online or in the shop?
Practical Activity to Assess
(Achievement Criteria)
Evaluation Criteria for Practical Activity
Practical Evaluation Online, Shop or Employer assisted?
% Practical Assessment Weighting
*
Shop hours needed for teaching and evaluating
ing to manufac-turer’s specifica-tions
Conduct accord-ing to work place requirements
LINE C 15%
C2 Service Hydraulic Components
Service Hydraulic Components
Follow safe work practices through-out entire task in-cluding lock out procedures
Conduct in a lo-gical manner
Conduct accord-ing to manufac-turer’s specifica-tion
Conduct accord-ing to work place requirements
15%
LINE D 17%
Worksheet for Blended Learning Design
HMT FOUNDATION + LEVELS 1 TO 4 (May,2020)
HMT LEVEL ONE TEACH ASSESS
Essential Practical Competencies
Theoretical Learning Tasks
(OPTIONAL)
Practical Learning Tasks
(OPTIONAL)
Taught online or in the shop?
Practical Activity to Assess
(Achievement Criteria)
Evaluation Criteria for Practical Activity
Practical Evaluation Online, Shop or Employer assisted?
% Practical Assessment Weighting
*
Shop hours needed for teaching and evaluating
D3 Service and Diagnose Batter-ies
Service and Dia-gnose Batteries
Follow safe work practices through-out entire task in-cluding lock out procedures
Conduct in a lo-gical manner
Conduct accord-ing to manufac-turer’s specifica-tions
Conduct accord-ing to work place requirements
4.25%
D4 Service Char-ging Systems
Service Charging Systems
Follow safe work practices through-out entire task in-cluding lock out procedures
Conduct in a lo-gical manner
Conduct accord-ing to manufac-
4.25%
Worksheet for Blended Learning Design
HMT FOUNDATION + LEVELS 1 TO 4 (May,2020)
HMT LEVEL ONE TEACH ASSESS
Essential Practical Competencies
Theoretical Learning Tasks
(OPTIONAL)
Practical Learning Tasks
(OPTIONAL)
Taught online or in the shop?
Practical Activity to Assess
(Achievement Criteria)
Evaluation Criteria for Practical Activity
Practical Evaluation Online, Shop or Employer assisted?
% Practical Assessment Weighting
*
Shop hours needed for teaching and evaluating
turer’s specifica-tions
Conduct accord-ing to work place requirements
D6 Service Start-ing Systems
Service Starting Systems
Follow safe work practices through-out entire task in-cluding lock out procedures
Conduct in a lo-gical manner
Conduct accord-ing to manufac-turer’s specifica-tions
Conduct accord-ing to work place requirements
4.25%
D8 Service Elec-trical Circuits
Service Electrical Circuits
Follow safe work practices through-out entire task in-cluding lock out
4.25%
Worksheet for Blended Learning Design
HMT FOUNDATION + LEVELS 1 TO 4 (May,2020)
HMT LEVEL ONE TEACH ASSESS
Essential Practical Competencies
Theoretical Learning Tasks
(OPTIONAL)
Practical Learning Tasks
(OPTIONAL)
Taught online or in the shop?
Practical Activity to Assess
(Achievement Criteria)
Evaluation Criteria for Practical Activity
Practical Evaluation Online, Shop or Employer assisted?
% Practical Assessment Weighting
*
Shop hours needed for teaching and evaluating
procedures Conduct in a lo-
gical manner Conduct accord-
ing to manufac-turer’s specifica-tions
Conduct accord-ing to work place requirements
LINE E 19%E1 Service and Diagnose Tires, Wheels and Hubs
Service and Dia-gnose Tires, Wheels and Hubs
Follow safe work practices through-out entire task in-cluding lock out procedures
Conduct in a lo-gical manner
Conduct accord-ing to manufac-turer’s specifica-tions
4.75%
Worksheet for Blended Learning Design
HMT FOUNDATION + LEVELS 1 TO 4 (May,2020)
HMT LEVEL ONE TEACH ASSESS
Essential Practical Competencies
Theoretical Learning Tasks
(OPTIONAL)
Practical Learning Tasks
(OPTIONAL)
Taught online or in the shop?
Practical Activity to Assess
(Achievement Criteria)
Evaluation Criteria for Practical Activity
Practical Evaluation Online, Shop or Employer assisted?
% Practical Assessment Weighting
*
Shop hours needed for teaching and evaluating
Conduct accord-ing to work place requirements
E2 Service Steer-ing Systems
Service Steering Systems
Follow safe work practices through-out entire task in-cluding lock out procedures
Conduct in a lo-gical manner
Conduct accord-ing to manufac-turer’s specifica-tions
Conduct accord-ing to work place requirements
4.75%
E4 Service, Dia-gnose and Repair Suspension Sys-tems
Service, Dia-gnose and Re-pair Suspension Systems
Follow safe work practices through-out entire task in-cluding lock out procedures
Conduct in a lo-
4.75%
Worksheet for Blended Learning Design
HMT FOUNDATION + LEVELS 1 TO 4 (May,2020)
HMT LEVEL ONE TEACH ASSESS
Essential Practical Competencies
Theoretical Learning Tasks
(OPTIONAL)
Practical Learning Tasks
(OPTIONAL)
Taught online or in the shop?
Practical Activity to Assess
(Achievement Criteria)
Evaluation Criteria for Practical Activity
Practical Evaluation Online, Shop or Employer assisted?
% Practical Assessment Weighting
*
Shop hours needed for teaching and evaluating
gical manner Conduct accord-
ing to manufac-turer’s specifica-tions
Conduct accord-ing to work place requirements
E6 Diagnose and Repair Frames
Diagnose and Repair Frames
Follow safe work practices through-out entire task in-cluding lock out procedures
Conduct in a lo-gical manner
Conduct accord-ing to manufac-turer’s specifica-tions
Conduct accord-ing to work place requirements
4.75%
LINE F 10%
Worksheet for Blended Learning Design
HMT FOUNDATION + LEVELS 1 TO 4 (May,2020)
HMT LEVEL ONE TEACH ASSESS
Essential Practical Competencies
Theoretical Learning Tasks
(OPTIONAL)
Practical Learning Tasks
(OPTIONAL)
Taught online or in the shop?
Practical Activity to Assess
(Achievement Criteria)
Evaluation Criteria for Practical Activity
Practical Evaluation Online, Shop or Employer assisted?
% Practical Assessment Weighting
*
Shop hours needed for teaching and evaluating
F1 Service Land-ing Gear and Trailer Accessor-ies
Service Landing Gear and Trailer Accessories
Follow safe work practices through-out entire task in-cluding lock out procedures
Conduct in a lo-gical manner
Conduct accord-ing to manufac-turer’s specifica-tions
Conduct accord-ing to work place require-ments
2.5%
F2 Service and Repair Coupling Systems
Service and Re-pair Coupling Systems
Follow safe work practices through-out entire task in-cluding lock out procedures
Conduct in a lo-gical manner
Conduct accord-
2.5%
Worksheet for Blended Learning Design
HMT FOUNDATION + LEVELS 1 TO 4 (May,2020)
HMT LEVEL ONE TEACH ASSESS
Essential Practical Competencies
Theoretical Learning Tasks
(OPTIONAL)
Practical Learning Tasks
(OPTIONAL)
Taught online or in the shop?
Practical Activity to Assess
(Achievement Criteria)
Evaluation Criteria for Practical Activity
Practical Evaluation Online, Shop or Employer assisted?
% Practical Assessment Weighting
*
Shop hours needed for teaching and evaluating
ing to manufac-turer’s specifica-tions
Conduct accord-ing to work place require-ments
F3 Service, Dia-gnose and Repair Trailer Body Com-ponents
Service, Dia-gnose and Re-pair Trailer Body Components
Follow safe work practices through-out entire task in-cluding lock out procedures
Conduct in a lo-gical manner
Conduct accord-ing to manufac-turer’s specifica-tions
Conduct accord-ing to work place require-ments
2.5%
Worksheet for Blended Learning Design
HMT FOUNDATION + LEVELS 1 TO 4 (May,2020)
HMT LEVEL ONE TEACH ASSESS
Essential Practical Competencies
Theoretical Learning Tasks
(OPTIONAL)
Practical Learning Tasks
(OPTIONAL)
Taught online or in the shop?
Practical Activity to Assess
(Achievement Criteria)
Evaluation Criteria for Practical Activity
Practical Evaluation Online, Shop or Employer assisted?
% Practical Assessment Weighting
*
Shop hours needed for teaching and evaluating
F4 Service, Dia-gnose and Repair Heating and Refri-geration Systems
Service, Dia-gnose and Re-pair Heating and Refrigeration Systems
Follow safe work practices through-out entire task in-cluding lock out procedures
Conduct in a lo-gical manner
Conduct accord-ing to manufac-turer’s specifica-tions
Conduct accord-ing to work place require-ments
2.5%
LINE G 5%G2 Diagnose and Repair Heating and Air Condition-ing Systems
Diagnose and Repair Heating and Air Condi-tioning Systems
Follow safe work practices through-out entire task in-cluding lock out procedures
Conduct in a lo-gical manner
5%
Worksheet for Blended Learning Design
HMT FOUNDATION + LEVELS 1 TO 4 (May,2020)
HMT LEVEL ONE TEACH ASSESS
Essential Practical Competencies
Theoretical Learning Tasks
(OPTIONAL)
Practical Learning Tasks
(OPTIONAL)
Taught online or in the shop?
Practical Activity to Assess
(Achievement Criteria)
Evaluation Criteria for Practical Activity
Practical Evaluation Online, Shop or Employer assisted?
% Practical Assessment Weighting
*
Shop hours needed for teaching and evaluating
Conduct accord-ing to manufac-turer’s specifica-tions
Conduct accord-ing to work place require-ments
LINE J 5%J2 Service Cab Structures
Service Cab Structures
Follow safe work practices through-out entire task in-cluding lock out procedures
Conduct in a lo-gical manner
Conduct accord-ing to manufac-turer’s specifica-tions
Conduct accord-ing to work place require-
5%
Worksheet for Blended Learning Design
HMT FOUNDATION + LEVELS 1 TO 4 (May,2020)
HMT LEVEL ONE TEACH ASSESS
Essential Practical Competencies
Theoretical Learning Tasks
(OPTIONAL)
Practical Learning Tasks
(OPTIONAL)
Taught online or in the shop?
Practical Activity to Assess
(Achievement Criteria)
Evaluation Criteria for Practical Activity
Practical Evaluation Online, Shop or Employer assisted?
% Practical Assessment Weighting
*
Shop hours needed for teaching and evaluating
ments
Worksheet for Blended Learning Design
HMT FOUNDATION + LEVELS 1 TO 4 (May,2020)
Heavy Mechanical Trades Level 2
Essential Practical Competencies For each Essential Practical Competency, decide which learning tasks can be taught online or must be in the shop. For each Practical Activity Assessment (Achievement Criteria), decide what can be assessed online, requires a shop hours to
assess or can be assessed with the assistance of an employer sponsor. Use the Learning Task columns to determine which learning tasks are needed to teach the competencies. This can be used if
needed for planning hours or online content.
HMT LEVEL TWO TEACH
ASSESS
Essential Practical Competencies
Theoretical Learning Tasks
(OPTIONAL)
Practical Learning Tasks
(OPTIONAL)
Taught online or in the shop?
Practical Activity to Assess
(Achievement Criteria)
Evaluation Criteria for Practical Activity
Practical Evaluation Online, Shop or Employer assisted?
% Practical Assessment Weighting
Shop hours needed for teaching and evaluating
LINE D 40%
D5 Diagnose and Repair Charging Systems
Diagnose and Repair Charging Systems
Follow safe work practices throughout entire task including lock out proced-ures
Conduct in a lo-gical manner
8%
Worksheet for Blended Learning Design
HMT FOUNDATION + LEVELS 1 TO 4 (May,2020)
HMT LEVEL TWO TEACH
ASSESS
Essential Practical Competencies
Theoretical Learning Tasks
(OPTIONAL)
Practical Learning Tasks
(OPTIONAL)
Taught online or in the shop?
Practical Activity to Assess
(Achievement Criteria)
Evaluation Criteria for Practical Activity
Practical Evaluation Online, Shop or Employer assisted?
% Practical Assessment Weighting
Shop hours needed for teaching and evaluating
Conduct accord-ing to manufac-turer’s specifica-tions
Conduct ac-cording to work place require-ments
D7 Diagnose and Repair Starting Systems
Diagnose and Repair Starting Systems
Follow safe work practices throughout entire task including lock out proced-ures
Conduct in a lo-gical manner
Conduct accord-ing to manufac-turer’s specifica-tions
Conduct ac-cording to work
8%
Worksheet for Blended Learning Design
HMT FOUNDATION + LEVELS 1 TO 4 (May,2020)
HMT LEVEL TWO TEACH
ASSESS
Essential Practical Competencies
Theoretical Learning Tasks
(OPTIONAL)
Practical Learning Tasks
(OPTIONAL)
Taught online or in the shop?
Practical Activity to Assess
(Achievement Criteria)
Evaluation Criteria for Practical Activity
Practical Evaluation Online, Shop or Employer assisted?
% Practical Assessment Weighting
Shop hours needed for teaching and evaluating
place require-ments
D9 Diagnose and Repair Electrical Components and Systems
Diagnose and Repair Electrical Components and Systems
Follow safe work practices throughout entire task including lock out proced-ures
Conduct in a lo-gical manner
Conduct accord-ing to manufac-turer’s specifica-tions
Conduct accord-ing to work place requirements
8%
D10 Diagnose and Repair Elec-tronic Compon-ents and Systems
D10 Diagnose and Repair Elec-tronic Compon-ents and Sys-tems
Follow safe work practices throughout entire task including lock out proced-
8%
Worksheet for Blended Learning Design
HMT FOUNDATION + LEVELS 1 TO 4 (May,2020)
HMT LEVEL TWO TEACH
ASSESS
Essential Practical Competencies
Theoretical Learning Tasks
(OPTIONAL)
Practical Learning Tasks
(OPTIONAL)
Taught online or in the shop?
Practical Activity to Assess
(Achievement Criteria)
Evaluation Criteria for Practical Activity
Practical Evaluation Online, Shop or Employer assisted?
% Practical Assessment Weighting
Shop hours needed for teaching and evaluating
ures Conduct in a lo-
gical manner Conduct accord-
ing to manufac-turer’s specifica-tions
Conduct accord-ing to work place requirements
D11 Diagnose and Repair Vehicle Manage-ment Systems
Diagnose and Repair Vehicle Management Systems
Follow safe work practices throughout entire task including lock out proced-ures
Conduct in a lo-gical manner
Conduct accord-ing to manufac-turer’s specifica-tions
8%
Worksheet for Blended Learning Design
HMT FOUNDATION + LEVELS 1 TO 4 (May,2020)
HMT LEVEL TWO TEACH
ASSESS
Essential Practical Competencies
Theoretical Learning Tasks
(OPTIONAL)
Practical Learning Tasks
(OPTIONAL)
Taught online or in the shop?
Practical Activity to Assess
(Achievement Criteria)
Evaluation Criteria for Practical Activity
Practical Evaluation Online, Shop or Employer assisted?
% Practical Assessment Weighting
Shop hours needed for teaching and evaluating
Conduct accord-ing to work place requirements
LINE H 60%
H3 Diagnose and Repair Engine Support Systems
Diagnose and Repair Engine Support Systems
Follow safe work practices throughout entire task including lock out proced-ures
Conduct in a lo-gical manner
Conduct accord-ing to manufac-turer’s specifica-tions
Conduct accord-ing to work place requirements
7.5%
H5 Diagnose and Repair Diesel Supply Systems
Diagnose and Repair Diesel Supply Systems
Follow safe work practices
7.5%
Worksheet for Blended Learning Design
HMT FOUNDATION + LEVELS 1 TO 4 (May,2020)
HMT LEVEL TWO TEACH
ASSESS
Essential Practical Competencies
Theoretical Learning Tasks
(OPTIONAL)
Practical Learning Tasks
(OPTIONAL)
Taught online or in the shop?
Practical Activity to Assess
(Achievement Criteria)
Evaluation Criteria for Practical Activity
Practical Evaluation Online, Shop or Employer assisted?
% Practical Assessment Weighting
Shop hours needed for teaching and evaluating
throughout entire task including lock out proced-ures
Conduct in a lo-gical manner
Conduct accord-ing to manufac-turer’s specifica-tions
Conduct accord-ing to work place requirements
H8 Diagnose En-gine and Compon-ents
Diagnose Engine and Components
Follow safe work practices throughout entire task including lock out proced-ures
Conduct in a lo-gical manner
Conduct accord-ing to manufac-
7.5%
Worksheet for Blended Learning Design
HMT FOUNDATION + LEVELS 1 TO 4 (May,2020)
HMT LEVEL TWO TEACH
ASSESS
Essential Practical Competencies
Theoretical Learning Tasks
(OPTIONAL)
Practical Learning Tasks
(OPTIONAL)
Taught online or in the shop?
Practical Activity to Assess
(Achievement Criteria)
Evaluation Criteria for Practical Activity
Practical Evaluation Online, Shop or Employer assisted?
% Practical Assessment Weighting
Shop hours needed for teaching and evaluating
turer’s specifica-tions
Conduct accord-ing to work place requirements
H10 Repair En-gines and Com-ponents
Repair Engines and Components
Follow safe work practices throughout entire task including lock out proced-ures
Conduct in a lo-gical manner
Conduct accord-ing to manufac-turer’s specifica-tions
Conduct accord-ing to work place requirements
7.5%
H12 Diagnose and Repair Mech-
Diagnose and Repair Mechan-
Follow safe work practices
7.5%
Worksheet for Blended Learning Design
HMT FOUNDATION + LEVELS 1 TO 4 (May,2020)
HMT LEVEL TWO TEACH
ASSESS
Essential Practical Competencies
Theoretical Learning Tasks
(OPTIONAL)
Practical Learning Tasks
(OPTIONAL)
Taught online or in the shop?
Practical Activity to Assess
(Achievement Criteria)
Evaluation Criteria for Practical Activity
Practical Evaluation Online, Shop or Employer assisted?
% Practical Assessment Weighting
Shop hours needed for teaching and evaluating
anical Fuel Injec-tion Systems
ical Fuel Injection Systems
throughout entire task including lock out proced-ures
Conduct in a lo-gical manner
Conduct accord-ing to manufac-turer’s specifica-tions
Conduct accord-ing to work place requirements
H13 Diagnose and Repair Elec-tronic Diesel Fuel Systems
Diagnose and Repair Electronic Diesel Fuel Sys-tems
Follow safe work practices throughout entire task including lock out proced-ures
Conduct in a lo-gical manner
Conduct accord-ing to manufac-
7.5%
Worksheet for Blended Learning Design
HMT FOUNDATION + LEVELS 1 TO 4 (May,2020)
HMT LEVEL TWO TEACH
ASSESS
Essential Practical Competencies
Theoretical Learning Tasks
(OPTIONAL)
Practical Learning Tasks
(OPTIONAL)
Taught online or in the shop?
Practical Activity to Assess
(Achievement Criteria)
Evaluation Criteria for Practical Activity
Practical Evaluation Online, Shop or Employer assisted?
% Practical Assessment Weighting
Shop hours needed for teaching and evaluating
turer’s specifica-tions
Conduct accord-ing to work place requirements
H14 Diagnose and Repair Diesel Emission Systems
Diagnose and Repair Diesel Emission Sys-tems
Follow safe work practices throughout entire task including lock out proced-ures
Conduct in a lo-gical manner
Conduct accord-ing to manufac-turer’s specifica-tions
Conduct accord-ing to work place requirements
7.5%
H15 Diagnose and Repair En-
Diagnose and Repair Engine
Follow safe work practices
7.5%
Worksheet for Blended Learning Design
HMT FOUNDATION + LEVELS 1 TO 4 (May,2020)
HMT LEVEL TWO TEACH
ASSESS
Essential Practical Competencies
Theoretical Learning Tasks
(OPTIONAL)
Practical Learning Tasks
(OPTIONAL)
Taught online or in the shop?
Practical Activity to Assess
(Achievement Criteria)
Evaluation Criteria for Practical Activity
Practical Evaluation Online, Shop or Employer assisted?
% Practical Assessment Weighting
Shop hours needed for teaching and evaluating
gine Brakes Brakes throughout entire task including lock out proced-ures
Conduct in a lo-gical manner
Conduct accord-ing to manufac-turer’s specifica-tions
Conduct accord-ing to work place requirements
Worksheet for Blended Learning Design
HMT FOUNDATION + LEVELS 1 TO 4 (May,2020)
Heavy Mechanical Trades Level 3
Essential Practical Competencies For each Essential Practical Competency, decide which learning tasks can be taught online or must be in the shop. For each Practical Activity Assessment (Achievement Criteria), decide what can be assessed online, requires a shop hours to
assess or can be assessed with the assistance of an employer sponsor. Use the Learning Task columns to determine which learning tasks are needed to teach the competencies. This can be used if
needed for planning hours or online content.
HMT LEVEL THREE TEACH ASSESS
Essential Practical Competencies
Theoretical Learning Tasks
(OPTIONAL)
Practical Learning Tasks
(OPTIONAL)
Taught online or in the shop?
Practical Activity to Assess
(Achievement Criteria)
Evaluation Criteria for Practical Activity
Practical Evaluation Online, Shop or Employer assisted?
% Practical Assessment Weighting
Shop hours needed for teaching and evaluating
LINE I 100%
I3 Diagnose and Repair Clutches
Diagnose and Repair Clutches
Follow safe work practices throughout entire task including lock out proced-ures
Conduct in a lo-gical manner
Conduct accord-
10%
Worksheet for Blended Learning Design
HMT FOUNDATION + LEVELS 1 TO 4 (May,2020)
HMT LEVEL THREE TEACH ASSESS
Essential Practical Competencies
Theoretical Learning Tasks
(OPTIONAL)
Practical Learning Tasks
(OPTIONAL)
Taught online or in the shop?
Practical Activity to Assess
(Achievement Criteria)
Evaluation Criteria for Practical Activity
Practical Evaluation Online, Shop or Employer assisted?
% Practical Assessment Weighting
Shop hours needed for teaching and evaluating
ing to manufac-turer’s specifica-tions
Conduct ac-cording to work place require-ments
I5 Diagnose and Repair Manual Transmissions
Diagnose and Repair Manual Transmissions
Follow safe work practices throughout entire task including lock out proced-ures
Conduct in a lo-gical manner
Conduct accord-ing to manufac-turer’s specifica-tions
Conduct ac-cording to work place require-ments
10%
Worksheet for Blended Learning Design
HMT FOUNDATION + LEVELS 1 TO 4 (May,2020)
HMT LEVEL THREE TEACH ASSESS
Essential Practical Competencies
Theoretical Learning Tasks
(OPTIONAL)
Practical Learning Tasks
(OPTIONAL)
Taught online or in the shop?
Practical Activity to Assess
(Achievement Criteria)
Evaluation Criteria for Practical Activity
Practical Evaluation Online, Shop or Employer assisted?
% Practical Assessment Weighting
Shop hours needed for teaching and evaluating
I6 Diagnose and Repair Automated Transmissions
Diagnose and Repair Automated Transmissions
Follow safe work practices throughout entire task including lock out proced-ures
Conduct in a lo-gical manner
Conduct accord-ing to manufac-turer’s specifica-tions
Conduct ac-cording to work place require-ments
5%
I9 Diagnose and Repair Automatic Transmission and Torque Converters
Diagnose and Repair Automatic Transmission and Torque Converters
Follow safe work practices throughout entire task including lock out proced-ures
Conduct in a lo-
15%
Worksheet for Blended Learning Design
HMT FOUNDATION + LEVELS 1 TO 4 (May,2020)
HMT LEVEL THREE TEACH ASSESS
Essential Practical Competencies
Theoretical Learning Tasks
(OPTIONAL)
Practical Learning Tasks
(OPTIONAL)
Taught online or in the shop?
Practical Activity to Assess
(Achievement Criteria)
Evaluation Criteria for Practical Activity
Practical Evaluation Online, Shop or Employer assisted?
% Practical Assessment Weighting
Shop hours needed for teaching and evaluating
gical manner Conduct accord-
ing to manufac-turer’s specifica-tions
Conduct ac-cording to work place require-ments
I10 Diagnose and Repair Powershift Transmissions
Diagnose and Repair Powershift Transmissions
Follow safe work practices throughout entire task including lock out proced-ures
Conduct in a lo-gical manner
Conduct accord-ing to manufac-turer’s specifica-tions
Conduct ac-cording to work
15%
Worksheet for Blended Learning Design
HMT FOUNDATION + LEVELS 1 TO 4 (May,2020)
HMT LEVEL THREE TEACH ASSESS
Essential Practical Competencies
Theoretical Learning Tasks
(OPTIONAL)
Practical Learning Tasks
(OPTIONAL)
Taught online or in the shop?
Practical Activity to Assess
(Achievement Criteria)
Evaluation Criteria for Practical Activity
Practical Evaluation Online, Shop or Employer assisted?
% Practical Assessment Weighting
Shop hours needed for teaching and evaluating
place require-ments
I12 Diagnose and Repair Drivelines
Diagnose and Repair Drivelines
Follow safe work practices throughout entire task including lock out proced-ures
Conduct in a lo-gical manner
Conduct accord-ing to manufac-turer’s specifica-tions
Conduct ac-cording to work place require-ments
5%
I14 Diagnose and Repair Drive Axles
Diagnose and Repair Drive Axles
Follow safe work practices throughout entire task including lock out proced-
10%
Worksheet for Blended Learning Design
HMT FOUNDATION + LEVELS 1 TO 4 (May,2020)
HMT LEVEL THREE TEACH ASSESS
Essential Practical Competencies
Theoretical Learning Tasks
(OPTIONAL)
Practical Learning Tasks
(OPTIONAL)
Taught online or in the shop?
Practical Activity to Assess
(Achievement Criteria)
Evaluation Criteria for Practical Activity
Practical Evaluation Online, Shop or Employer assisted?
% Practical Assessment Weighting
Shop hours needed for teaching and evaluating
ures Conduct in a lo-
gical manner Conduct accord-
ing to manufac-turer’s specifica-tions
Conduct ac-cording to work place require-ments
I16 Diagnose and Repair Final Drives
Diagnose and Repair Final Drives
Follow safe work practices throughout entire task including lock out proced-ures
Conduct in a lo-gical manner
Conduct accord-ing to manufac-turer’s specifica-tions
15%
Worksheet for Blended Learning Design
HMT FOUNDATION + LEVELS 1 TO 4 (May,2020)
HMT LEVEL THREE TEACH ASSESS
Essential Practical Competencies
Theoretical Learning Tasks
(OPTIONAL)
Practical Learning Tasks
(OPTIONAL)
Taught online or in the shop?
Practical Activity to Assess
(Achievement Criteria)
Evaluation Criteria for Practical Activity
Practical Evaluation Online, Shop or Employer assisted?
% Practical Assessment Weighting
Shop hours needed for teaching and evaluating
Conduct ac-cording to work place require-ments
I17 Diagnose and Repair Driveline Retarders
Diagnose and Repair Driveline Retarders
Follow safe work practices throughout entire task including lock out proced-ures
Conduct in a lo-gical manner
Conduct accord-ing to manufac-turer’s specifica-tions
Conduct ac-cording to work place require-ments
5%
I18 Diagnose and Repair
Diagnose and Repair Winches
Follow safe work practices throughout entire
5%
Worksheet for Blended Learning Design
HMT FOUNDATION + LEVELS 1 TO 4 (May,2020)
HMT LEVEL THREE TEACH ASSESS
Essential Practical Competencies
Theoretical Learning Tasks
(OPTIONAL)
Practical Learning Tasks
(OPTIONAL)
Taught online or in the shop?
Practical Activity to Assess
(Achievement Criteria)
Evaluation Criteria for Practical Activity
Practical Evaluation Online, Shop or Employer assisted?
% Practical Assessment Weighting
Shop hours needed for teaching and evaluating
Winches task including lock out proced-ures
Conduct in a lo-gical manner
Conduct accord-ing to manufac-turer’s specifica-tions
Conduct ac-cording to work place require-ments
I19 Diagnose and Repair Power Take-offs and Transfer Cases
Diagnose and Repair Power Take-offs and Transfer Cases
Follow safe work practices throughout entire task including lock out proced-ures
Conduct in a lo-gical manner
Conduct accord-ing to manufac-
5%
Worksheet for Blended Learning Design
HMT FOUNDATION + LEVELS 1 TO 4 (May,2020)
HMT LEVEL THREE TEACH ASSESS
Essential Practical Competencies
Theoretical Learning Tasks
(OPTIONAL)
Practical Learning Tasks
(OPTIONAL)
Taught online or in the shop?
Practical Activity to Assess
(Achievement Criteria)
Evaluation Criteria for Practical Activity
Practical Evaluation Online, Shop or Employer assisted?
% Practical Assessment Weighting
Shop hours needed for teaching and evaluating
turer’s specifica-tions
Conduct ac-cording to work place require-ments
Worksheet for Blended Learning Design
HMT FOUNDATION + LEVELS 1 TO 4 (May,2020)
Heavy Duty Equipment Technician Level 4
Essential Practical Competencies For each Essential Practical Competency, decide which learning tasks can be taught online or must be in the shop. For each Practical Activity Assessment (Achievement Criteria), decide what can be assessed online, requires a shop hours to
assess or can be assessed with the assistance of an employer sponsor. Use the Learning Task columns to determine which learning tasks are needed to teach the competencies. This can be used if
needed for planning hours or online content.
HDET LEVEL FOUR TEACH ASSESS
Essential Practical Competencies
Theoretical Learning Tasks
(OPTIONAL)
Practical Learning Tasks
(OPTIONAL)
Taught online or in the shop?
Practical Activity to Assess
(Achievement Criteria)
Evaluation Criteria for Practical Activity
Practical Evaluation Online, Shop or Employer assisted?
% Practical Assessment Weighting
Shop hours needed for teaching and evaluating
LINE C 55%
C3 Diagnose and Repair Advanced Hydraulic Systems
Diagnose and Repair Advanced Hydraulic Systems
Follow safe work practices throughout entire task including lock out proced-ures
Conduct in a lo-gical manner
Conduct accord-
55%
Worksheet for Blended Learning Design
HMT FOUNDATION + LEVELS 1 TO 4 (May,2020)
HDET LEVEL FOUR TEACH ASSESS
Essential Practical Competencies
Theoretical Learning Tasks
(OPTIONAL)
Practical Learning Tasks
(OPTIONAL)
Taught online or in the shop?
Practical Activity to Assess
(Achievement Criteria)
Evaluation Criteria for Practical Activity
Practical Evaluation Online, Shop or Employer assisted?
% Practical Assessment Weighting
Shop hours needed for teaching and evaluating
ing to manufac-turer’s specifica-tions
Conduct ac-cording to work place require-ments
LINE D 10%
D13 Service, Diagnose and Repair Electric Drive Systems
Service, Diagnose and Repair Electric Drive Systems
Follow safe work practices throughout entire task including lock out proced-ures
Conduct in a lo-gical manner
Conduct accord-ing to manufac-turer’s specifica-tions
Conduct ac-cording to work
10%
Worksheet for Blended Learning Design
HMT FOUNDATION + LEVELS 1 TO 4 (May,2020)
HDET LEVEL FOUR TEACH ASSESS
Essential Practical Competencies
Theoretical Learning Tasks
(OPTIONAL)
Practical Learning Tasks
(OPTIONAL)
Taught online or in the shop?
Practical Activity to Assess
(Achievement Criteria)
Evaluation Criteria for Practical Activity
Practical Evaluation Online, Shop or Employer assisted?
% Practical Assessment Weighting
Shop hours needed for teaching and evaluating
place require-ments
LINE E 25%
E8 Diagnose and Repair Wheeled Equipment Steering
Diagnose and Repair Wheeled Equipment Steering
Follow safe work practices throughout entire task including lock out proced-ures
Conduct in a lo-gical manner
Conduct accord-ing to manufac-turer’s specifica-tions
Conduct ac-cording to work place require-ments
8.33%
E9 Diagnose and Repair
Diagnose and Repair Track
Follow safe work practices throughout entire
8.33%
Worksheet for Blended Learning Design
HMT FOUNDATION + LEVELS 1 TO 4 (May,2020)
HDET LEVEL FOUR TEACH ASSESS
Essential Practical Competencies
Theoretical Learning Tasks
(OPTIONAL)
Practical Learning Tasks
(OPTIONAL)
Taught online or in the shop?
Practical Activity to Assess
(Achievement Criteria)
Evaluation Criteria for Practical Activity
Practical Evaluation Online, Shop or Employer assisted?
% Practical Assessment Weighting
Shop hours needed for teaching and evaluating
Track Machine Steering
Machine Steering
task including lock out proced-ures
Conduct in a lo-gical manner
Conduct accord-ing to manufac-turer’s specifica-tions
Conduct ac-cording to work place require-ments
E10 Diagnose and Repair Undercarriage
Diagnose and Repair Undercarriage
Follow safe work practices throughout entire task including lock out proced-ures
Conduct in a lo-gical manner
Conduct accord-ing to manufac-
8.33%
Worksheet for Blended Learning Design
HMT FOUNDATION + LEVELS 1 TO 4 (May,2020)
HDET LEVEL FOUR TEACH ASSESS
Essential Practical Competencies
Theoretical Learning Tasks
(OPTIONAL)
Practical Learning Tasks
(OPTIONAL)
Taught online or in the shop?
Practical Activity to Assess
(Achievement Criteria)
Evaluation Criteria for Practical Activity
Practical Evaluation Online, Shop or Employer assisted?
% Practical Assessment Weighting
Shop hours needed for teaching and evaluating
turer’s specifica-tions
Conduct ac-cording to work place require-ments
LINE J 10%
J4 Diagnose and Repair Working Attachments
Diagnose and Repair Working Attachments
Follow safe work practices throughout entire task including lock out proced-ures
Conduct in a lo-gical manner
Conduct accord-ing to manufac-turer’s specifica-tions
Conduct ac-cording to work place require-
5%
Worksheet for Blended Learning Design
HMT FOUNDATION + LEVELS 1 TO 4 (May,2020)
HDET LEVEL FOUR TEACH ASSESS
Essential Practical Competencies
Theoretical Learning Tasks
(OPTIONAL)
Practical Learning Tasks
(OPTIONAL)
Taught online or in the shop?
Practical Activity to Assess
(Achievement Criteria)
Evaluation Criteria for Practical Activity
Practical Evaluation Online, Shop or Employer assisted?
% Practical Assessment Weighting
Shop hours needed for teaching and evaluating
mentsJ5 Diagnose and Repair Pneumatic Systems Finishes
Diagnose and Repair Pneumatic Systems
Follow safe work practices throughout entire task including lock out proced-ures
Conduct in a lo-gical manner
Conduct accord-ing to manufac-turer’s specifica-tions
Conduct ac-cording to work place require-ments
5%
Worksheet for Blended Learning Design
HMT FOUNDATION + LEVELS 1 TO 4 (May,2020)
Transport Trailer Technician Level 2 / Truck and Transport Mechanic Level 4
Essential Practical Competencies For each Essential Practical Competency, decide which learning tasks can be taught online or must be in the shop. For each Practical Activity Assessment (Achievement Criteria), decide what can be assessed online, requires a shop hours to
assess or can be assessed with the assistance of an employer sponsor. Use the Learning Task columns to determine which learning tasks are needed to teach the competencies. This can be used if
needed for planning hours or online content.
TTT L2 /TTM L4 TEACH ASSESS
Essential Practical Competencies
Theoretical Learning Tasks
(OPTIONAL)
Practical Learning Tasks
(OPTIONAL)
Taught online or in the shop?
Practical Activity to Assess
(Achievement Criteria)
Evaluation Criteria for Practical Activity
Practical Evaluation Online, Shop or Employer assisted?
% Practical Assessment Weighting
Shop hours needed for teaching and evaluating
LINE B 30%
B4 Diagnose and Repair Advanced Brake Systems
Diagnose and Repair Advanced Brake Systems
Follow safe work practices throughout entire task including lock out proced-ures
Conduct in a lo-gical manner
Conduct accord-
30%
Worksheet for Blended Learning Design
HMT FOUNDATION + LEVELS 1 TO 4 (May,2020)
TTT L2 /TTM L4 TEACH ASSESS
Essential Practical Competencies
Theoretical Learning Tasks
(OPTIONAL)
Practical Learning Tasks
(OPTIONAL)
Taught online or in the shop?
Practical Activity to Assess
(Achievement Criteria)
Evaluation Criteria for Practical Activity
Practical Evaluation Online, Shop or Employer assisted?
% Practical Assessment Weighting
Shop hours needed for teaching and evaluating
ing to manufac-turer’s specifica-tions
Conduct ac-cording to work place require-ments
LINE C 30%
C3 Diagnose and Repair Advanced Hydraulic Systems
Diagnose and Repair Advanced Hydraulic Systems
Follow safe work practices throughout entire task including lock out proced-ures
Conduct in a lo-gical manner
Conduct accord-ing to manufac-turer’s specifica-tions
Conduct ac-cording to work
30%
Worksheet for Blended Learning Design
HMT FOUNDATION + LEVELS 1 TO 4 (May,2020)
TTT L2 /TTM L4 TEACH ASSESS
Essential Practical Competencies
Theoretical Learning Tasks
(OPTIONAL)
Practical Learning Tasks
(OPTIONAL)
Taught online or in the shop?
Practical Activity to Assess
(Achievement Criteria)
Evaluation Criteria for Practical Activity
Practical Evaluation Online, Shop or Employer assisted?
% Practical Assessment Weighting
Shop hours needed for teaching and evaluating
place require-ments
LINE D 5%
D12 Service, Diagnose and Repair Hybrid Systems
Service, Diagnose and Repair Hybrid Systems
Follow safe work practices throughout entire task including lock out proced-ures
Conduct in a lo-gical manner
Conduct accord-ing to manufac-turer’s specifica-tions
Conduct ac-cording to work place require-ments
5%
LINE E 25%
Worksheet for Blended Learning Design
HMT FOUNDATION + LEVELS 1 TO 4 (May,2020)
TTT L2 /TTM L4 TEACH ASSESS
Essential Practical Competencies
Theoretical Learning Tasks
(OPTIONAL)
Practical Learning Tasks
(OPTIONAL)
Taught online or in the shop?
Practical Activity to Assess
(Achievement Criteria)
Evaluation Criteria for Practical Activity
Practical Evaluation Online, Shop or Employer assisted?
% Practical Assessment Weighting
Shop hours needed for teaching and evaluating
E3 Diagnose and Repair Hydraulic Assisted Steering Systems
Diagnose and Repair Hydraulic Assisted Steering Systems
Follow safe work practices throughout entire task including lock out proced-ures
Conduct in a lo-gical manner
Conduct accord-ing to manufac-turer’s specifica-tions
Conduct ac-cording to work place require-ments
12.5%
E7 Diagnose and Repair Frames
Diagnose and Repair Frames
Follow safe work practices throughout entire task including lock out proced-ures
Conduct in a lo-
12.5%
Worksheet for Blended Learning Design
HMT FOUNDATION + LEVELS 1 TO 4 (May,2020)
TTT L2 /TTM L4 TEACH ASSESS
Essential Practical Competencies
Theoretical Learning Tasks
(OPTIONAL)
Practical Learning Tasks
(OPTIONAL)
Taught online or in the shop?
Practical Activity to Assess
(Achievement Criteria)
Evaluation Criteria for Practical Activity
Practical Evaluation Online, Shop or Employer assisted?
% Practical Assessment Weighting
Shop hours needed for teaching and evaluating
gical manner Conduct accord-
ing to manufac-turer’s specifica-tions
Conduct ac-cording to work place require-ments
LINE J 10%
J3 Repair Advanced Cab and Body Structures
Repair Advanced Cab and Body Structures
Follow safe work practices throughout entire task including lock out proced-ures
Conduct in a lo-gical manner
Conduct accord-ing to manufac-turer’s specifica-tions
10%
Worksheet for Blended Learning Design
HMT FOUNDATION + LEVELS 1 TO 4 (May,2020)
TTT L2 /TTM L4 TEACH ASSESS
Essential Practical Competencies
Theoretical Learning Tasks
(OPTIONAL)
Practical Learning Tasks
(OPTIONAL)
Taught online or in the shop?
Practical Activity to Assess
(Achievement Criteria)
Evaluation Criteria for Practical Activity
Practical Evaluation Online, Shop or Employer assisted?
% Practical Assessment Weighting
Shop hours needed for teaching and evaluating
Conduct ac-cording to work place require-ments