Modular Cubelet Ice MachineItem #:

Project:

Qty:

AIA#:

618 Hwy, 74 S., Peachtree City, GA 30269 | TEL 800-438-6087 | FAX 800-345-1325 | www.hoshizakiamerica.com© HOSHIZAKI AMERICA, INC.

Cube Dimensions*

* approximate size in inches, image not to scale

Features

• Up to 650 lbs. of ice production per 24 hours

• 2 second flush cycle every hour

• Flush cycle removes sediment for cleaner ice

• Infrared bin control for easy cleaning and reliability

• Protected by H-GUARD Plus Antimicrobial Agent

• R-404A Refrigerant

Durable stainless steel exterior

Advanced CleanCycle24TM design

Stainless steel auger with greaseless bearing

Available on Bins:

• Ambient Temp Range 45 - 100°F• Water Temp Range 45 - 90°F• Water Pressure 10 - 113 PSIG• Voltage Range 104-127V

Operating Limits• Icemaker Water Supply Line: Minimum 1/4” Nominal ID Copper Water Tubing or Equivalent• Icemaker Drain Line: Minimum 3/4” Nominal ID Hard Pipe or EquivalentWater-Cooled Model (Lines Must Be Independent of Icemaker)• Condenser Water Supply Line: Minimum 1/4” Nominal ID Copper Water Tubing or Equivalent• Condenser Drain/Return Line: Minimum 1/4” Nominal ID Hard Pipe (open drain system) or Copper Water Tubing (closed loop system) or Equivalent

Plumbing

• Panels easily removed and all components accessible for service.• Allow 24”(61 cm) clearance at top for removal of auger and 6” (15 cm) clearance at rear and sides for proper air circulation and ease of maintenance/service.

Service

W x D x H

Hoshizaki reserves the right to change specifications without notice.Printed in the U.S.A.

3 Year Parts & Labor on entire machine. 5 Year Parts on Compressor; air-cooled condenser coil. Valid in United States, Canada, Puerto Rico and U.S. Territories. Contact factory for warranty in other countries.

Warranty:

FD-650M_H-CFD-650M_H-C

01/23/18Item # 13327

Top kit may be required; See Bin Spec Sheets.B-800PF/SFB-250PF B-700PF/S B-900PF/SF

TM

22" x 24" x 26”

FD-650MWH-CWater-Cooled

B-500PF/SF

FD-650MAH-CAir-Cooled

Shown on optionalLancer 30” Dispenser

FD-650MRH-CRemote Air-Cooled

Slim-Line Dispenser Series

®

32” x 261/2” x 391/2”Shipping Dimensions

650

615

590

FD-650MAH-C

FD-650MWH-C

FD-650MRH-C

Air 474

532

476

12.0

12.0

12.0

N/A

125

N/A

5.35

3.81

4.75

20A

20A

20A

Water

6,800

4,500

4,900

176 / 205

176 / 205

176 / 205

115V/60/1

115V/60/1

115V/60/1

Air / Water TempLbs. per 24 hoursCondenser Model

70°/ 50°F 90°/ 70°F

ICE PRODUCTIONPotable

Gal. per 100 lbs.Condenser

Gal. per 100 lbs.Max. Fuse Sz

or HACRCircuit Bkr

HeatRejectionBTU/hr.

Voltage

WATER USAGE

90°/ 70°F 90°/ 70°F

ELECTRICAL

90°/ 70°F

kWh Used per 100 lbs. Amperage

11.2A

7.8A

10.8A

CircuitWires

(including ground)

3

3

3

Net / ShipWeight (lbs.)

Refrigerant Charge Amount

12.4 oz.

15 oz.

4 lb. 1.2 oz.Remote (with condenser)

618 Hwy, 74 S., Peachtree City, GA 30269 | TEL 800-438-6087 | FAX 800-345-1325 | www.hoshizakiamerica.com© HOSHIZAKI AMERICA, INC.

BOTT

OM V

IEW

SIDE

VIE

WFR

ONT

VIEW

Printed in the U.S.A.

inch[mm]

WATER-COOLED REMOTE AIR-COOLED

REMOTE AIR-COOLED

WATER-COOLED

WATER-COOLED

REMOTE AIR-COOLEDWATER-COOLED

REMOTE AIR-COOLED

Front

REAR

VIE

W

Modular Cubelet Ice MachineFD-650M_H-CSlim-Line Dispenser Series

AIR-COOLED

AIR-COOLED

AIR-COOLED

AIR-COOLED

FrontFront

Voltage supply for the URC Remote Condenser is supplied from the Ice Maker.No addtional circuit is required.

Pre-Charged Tubing Kits(Sold Separately)20' R404-2046-235' R404-3546-2

URC-5F Remote Condenser (Sold Separately)(W x D x H) 21 13/16 x 14 1/16 x 32 13/16

For Use with FD-650MRH-C

Air Flow

URC-5F

2 1/2

1 3/4

1/4 LiquidRefrigerant Line

ElectricalConduitAccess

3

21 13/16 14 1/16

32 13/16

17 1/4 21 3/16

17 7/8

3/8 Discharge Line

FrontFront

FD-650M_H-C01/23/18

Item # 13327