jetpower40hw hot water high pressure pump unit - uraca
TRANSCRIPT
WE ARE URACA.
JetPower40HWHot water high pressure pump unitJetPower40HW cleans quickly,
efficiently and sustainably. Scaling,
coating and contaminants on dama-
geable surfaces can be removed by
the use of hot water with 95 °C and
with a cleaning pressure up to
1,000 bar / 14,500 psi in a gentle and
fast way.
Technical features _ Flexible and rapidly mobilized to the operation site e.g. with a passenger car
(trailer load of 2.1 t). _ Efficient diesel engine „Made in Germany“, with emission level compliant to
3B/TIER 4 final regulations, achieve fuel savings and emission reduction. _ JetPower40HW are reliable, long-life and user-friendly due to easily adjustable
pressure and flow regulation. _ All in all, the innovative arrangements of the components, especially of the heaters,
are extending the service intervals by concurrent increase of the energy-efficiency.
Anniversary Promotion“LIMITED EDITION”
12.5 % special discountOffer valid while supply lasts.
WE ARE URACA. SINCE 1893.
URACA GmbH & Co. KG • Sirchinger Straße 15 • 72574 Bad Urach • GermanyPhone +49 7125 133-0 • Fax +49 (0) 7125 133-202 • [email protected] • www.uraca.com Je
tPow
er40
HW
_F.e
n 0
8.18
, sub
ject
to c
hang
e w
itho
ut n
otic
e
Hot water edition –our solution for your tasksApplication areas
URACA JetPower Control
Selection of the operating pressure and water temperature is easy and
intuitive assured through central URACA JetPower Control Unit. See
and control all operation parameters at a glance, this also provides
excellent accessibility for routine maintenance.
_ In general to remove scaling, coating and contaminants on sensitive
and insensitive surfaces, by loosening in a fast and mild way, e.g.
bitumen, fat, resin, oil, wax, etc. _ For industrial cleaning to remove adhesives and coatings, especially in
the chemical and process industry as well as oil and gas industry, e.g.
in refineries, on oil platforms, fat separation and heat exchanger
industries. _ To clean and renovate facades and valuable monuments, construction
vehicles, scaffolding, construction formwork and equipment. _ For cities to clean public places, the traffic infrastructure, park decking
and flooring, outbuilding cleaning and specialized cleaning (e.g. to
remove graffiti, chewing gum, adhesive and cement remains).
Anniversary Promotion„LIMITED EDITION“
12.5 % special discountOffer valid while supply lasts.
Accessories (included in the scope of delivery)URACA spray lance for hot water with contact protectionFlexible hose line DN 8 / PN 1,000 x 20,000 mmPoint- / flat jet nozzle type PHot water rotation nozzleExtension cable 20 m for remote control R72Documentation
Technical data JetPower40HWPump type P3-10Drive power 5 - 56 kWPressure stages 800 / 1,000 barFlow rate 12.7 - 26 l/min at 800 bar
9.8 - 20 l/min at 1,000 barCleaning temperature
max. 95°C
Drive power motor 52 kW HATZDiesel / fuel tank 100 l / 150 lDimensions ca. 3,813 x 1,910 x 2,048 mmDead weight ca. 1,750 kg1 bar = 14.5038 psi, 1 l/min = 0.26417 USGPM, 1 kW = 1.3410 HP, 1 mm = 0.03937 inch, 1 kg = 2.205 lbs