Jijo GeorgeEmail: get4jijo85@gmail.com. Phone: (M) +91-8056185916

Automobile Engineering graduate with demonstrated skills in the field of Computer-Aided Design (CAD), Finite Element Analysis (FEA), Cost Efficient Design, Assessment & Design Improvement, Creative Design and Project management.

Poses good understanding of welded structure design Poses good knowledge in understanding of Design Drawings Able to communicate with the designer to understand New product development issues and current

product development issues along with manufacturing feasibility Poses good leadership skills to execute the project and keeping up the time lines Poses good analytical skills to contribute to the organization and adding knowledge and Value to the

work

Profile

Working as Analyst CAE at Onward Technologies Pune from (july2011 – present)Was deputed to caterpillar engineering design centre Chennai (may 2014 – may 2015)Underwent Advanced Masters Diploma in CAE from Fexilon Technologies, Bangalore (dec2010-july2011)

Software Packages

Altair hyperworks v-12 Ansa Nastran (MSC and NX) Abaqus Pro-E Microsoft office

Role and Responsibilities

FE modelling, performing analysis of structures of Off-highway trucks Liable for deciding loading and boundary conditions Validating the design based on the requirement and standards Accountable for post processing and preparing reports considering mechanical engineering

fundamentals To execute projects in coordination with team members. Providing solutions as per design requirement Persuasive communicator with good analytical & creative skills

Deliverables Solutions for design.

PROJECTS COMMENCED

1. Modal analysis

Industrial silencer Engine mounted bracket Frame mounted bracket

To understand the mode shapes, natural frequency, resonance

Software usedHypermesh, abaqus

Solution: increased the stiffness of the system to achive the desirable natural frequencies.

2. Linear static analysis

Gravity load, point load, pressure load.

Fueltank Weight lifting devices Holding handles Frames Frame mounted components

Software usedHypermesh, abaqusSolution: weight reduction, achieving the new design with allowable stress limit considering the factor of safety.

3. Non Linear analysis.

Material nonlinearity, boundary nonlinearity

Bolted joint analysis Roof bolter assembly Fuel tank assembly handrail assembly muffler assembly

Software used Hypermesh, abaqus

Solution: Evaluation of the joints, Bolts, Holding abutments, suggesting the number of joints required, Size of bolts required, deciding the type and size of washer required considering the factor of safety

SCHOLASTIC CRENDENTIALS

SUBJECT COLLEGE YEAR OF PASSING %OF MARKS

B.E. (Automobile) Shanmuganathan Engineering College, Arasampatti

2008 69

XII St. Thomas matriculation higher secondary School, Ayyankolly

2004 65

X St. Thomas matriculation higher secondary School, Ayyankolly

2002 68

(Jijo George)