Jim Maslowski

PDC

2008

Aseptic

Filling

Single Use Disposable

Components

Single-Use Fill Lines - The Components & Economies

Disposable Single Use Systems

Jim Maslowski

PDC

2008

Single Use Disposable

Components

Aseptic

Filling The Economies Of The PDC Single-Use Fill Line

One Set Of PDC Fill Lines Will Fill Your Entire Batch

Set-up Time To Fill Your Batch Is Less Than 1 Hour

Turn Around Time Is Minimal

CIP SIP Cleaning Is Eliminated

Disposal Cost Per Batch Is Minimal – One Set Of PDC Fill Lines Is About 25 Feet Of Tubing, Compared To Manifold Filling That Leaves Thousands Of Feet Of Plastic Tubing For Disposal

Lost Product, Left In The Disposable Plastic Tubing Is Minimal

Disposable Single Use Systems

Jim Maslowski

PDC

2008

Single Use Disposable

Components

Aseptic

Filling Single-Use Fill Lines For PDC Aseptic Fillers

Dual Fill Line With Integral Disposable Filter At The Product Supply Connection

Individual Fill Line With Aseptic Connector At the Product Supply Connection

Individual Fill Line With Sanitary Connector At the Product Supply Connection

Disposable Single Use Systems

Jim Maslowski

PDC

2008

Single Use Disposable

Components

Aseptic

Filling Components Of The Disposable Fill Line

Aseptic Connector At The Supply Connection

Coriolis Flow Meter Liner

Tubing Of Customer’s Choice Fill Nozzle With Sterility Cover

Disposable Single Use Systems

Jim Maslowski

PDC

2008

Single Use Disposable

Components

Aseptic

Filling High Flow 1/2” Disposable Nozzle

Enlarged View Of Sterility Cover And Nozzle

• 20 Liter Per Minute Flow Rate

• ADCF Nozzles Available

• Internal Screen Inhibits Dripping

The Fill Line Is Installed Into The Aseptic Filler. The Nozzle Is Positioned In The Class 100 Fill Zone. The Sterility Cover Is Removed. The Nozzle Remains Sterile. The Internal Molded Screen Helps Eliminate Dripping After The Fill.

Disposable Single Use Systems

Jim Maslowski

PDC

2008

Single Use Disposable

Components

Aseptic

Filling Small Volume 1/4” Disposable Nozzle

Enlarged View Of Sterility Cover And Nozzle

• 3 Liter Per Minute Flow Rate

• ADCF Nozzles Available

• Tip Design Inhibits Dripping

The Fill Line Is Installed Into The Aseptic Filler. The Nozzle Is Positioned In The Class 100 Fill Zone. The Sterility Cover Is Removed. The Nozzle Remains Sterile. The Tip Design Helps Eliminate Dripping After The Fill.

Nozzle Tip Viewed From The End

Disposable Single Use Systems

Jim Maslowski

PDC

2008

Single Use Disposable

Components

Aseptic

Filling Fill Nozzle In The Fill Zone

Class 100 Fill Zone With Laminar Flow and Continuous Real Time Particle Monitoring

Disposable Nozzle Shown In The Class 100 Fill Area