jingtong brochure
TRANSCRIPT
衡水京通工程橡胶有限公司
Hengshui JingTong Rubber Co.,LTDwww.bridgebearings.orgwww.jointwaterstop.com
http://hsjtxj.en.alibaba.com
【JINGTONG】
PRODUCT BROCHURE
ADD:Nanwangzhuang village,Hengshui City,Hebei Province,ChinaPhone :+86-15731809416Tel/Fax:+86-318-2877988E-mail: [email protected]
Hengshui JingTong Rubber Co,LTD
- 1 -
CONTENTS
CONTENTS---------------------------------------------- 1 -HENGSHUI JINGTONG RUBBER CO.,LTD------------ - 2 -一、Water-stop/Waterproof Materials---------------------- 3 -
【PVC/Rubber/HDPE Waterstop】------------------- 3 -【Hydrophilic expansion waterstop Strip】-------- - 8 -【Geomembrane】------------------------------------- - 9 -【Waterproof sheet】---------------------------------- - 9 -
二、Culvert & Pipeline Inflated Rubber Balloons------ - 9 -【Culvert Rubber Balloons】-------------------------- 9 -【Rubber Pipe Plug】-------------------------------- - 11 -
三、Bridge & Building Bearing-------------------------- - 13 -【Elastomer Bearing Pad】------------------------- - 13 -【Lead Rubber Bearing Isolator (LRB)】---------- 14 -【High Damping seismic isolation bearing】---- - 16 -【Pot Bearings】-------------------------------------- - 16 -
Hengshui JingTong Rubber Co,LTD
- 2 -
HENGSHUI JINGTONG RUBBER CO.,LTDlocated in Hengshui City,hebei provice,where very close to TianJin
City,Beijing city ,that specializes in manufacturing and exporting bridge
bearings,waterstop waterproof materials,Culvert & Pipeline Inflated
Rubber Balloons since the establishment in 2007.Registered capital is
101 million RMB.It covers an area of 200 thousand square meters,
including 3000 square meters workshop,and 2000 square meters for
testing,there are more than 200 employees,including 10 engineers and
10 testing workers.Our products including construction waterproof
materials ,bridge and building rubber bearings,culvert and pipeline
rubber airbag etc. Used in brige highway, culvert, pipeline,building
constructions.Adhering to the principle that quality determines the
success and failures. Our company pays much attention to quality
managements and today we are one of the leading companies owning
customers in many countries.To meet different needs of our customer,
our company can supply varies types of products.Our products has
passed ISO,GB etc. Inspection and provide the third party reports with
more than 3000 projects in domestic,and also export to
Malaysia,Kenya,Uganda,USA etc.
To suit your specific scheme, waterstops/bearing/rubber balloons
etc.products can be made to order as your designs, even with complex
profiles and different materials. So if you want to make a custom order,
don't forget to enclose your design drawing, sizes and standards.
Hengshui JingTong Rubber Co,LTD
- 3 -
一、Water-stop/Waterproof Materials【PVC/Rubber/HDPEWaterstop】
This kind of product includes:Rubber Water-stop, Hydrophilic expansion
rubber water-stop, Steel Edge
water-stop, PVC Water-stop, HDPE
water-stop, Bentonite Water-stop
strip etc. Water-stop materials. The
products comply with: KEJIJI [2008]
No.21 document & GB18173.2-2000
《Polymer waterproof materials part 2 :Water-stop》.
* As a factory, we can manufacture according to your request.
Note: 1.Colors: blue, black, yellow, grey etc.
No. Item Unit Parameter
1 Hardness Shore A >65
2 Tensile strength MPa ≥12
3 elongation % ≥300
4 Tensile modulus MPa ≥5.5
5 Brittleness temperature ℃ <-38
6 Bibulous rate % <0.5
7 Air aging (70±1℃,240 hours) % ≥95
8 Alkali effect coefficient
(20% alkali liquor,NaOH or KON)
≥95
PVC Waterstop Technical parameters
Hengshui JingTong Rubber Co,LTD
- 4 -
2.General-length:150mm,250mm,300mm,350mm,400mm,450mm,50
0mm, 600mm etc.
3.Thickness:3mm,5mm,8mm,10mm etc.
Waterstops are manufactured from Anti-Ageing customized plastic
compound with PVC as a base polymer,add plasticizer, stabilizer,
through extrusion processing .
It has features as below:
High Elasticity & Tensile Strength
Immune to Corrosion
Excellent weather resistant
Unaffected by acids, alkalis,
metals salts and other chemicals
Lower water absorption
Withstand high Hydrostatic pressure
It Can bear shocks of heavy turbines, Earth quakes, Floods
Dams, locks, canals, water reservoirs and aqueducts
Water and waste water
treatment facilities
Primary and secondary
containment structures
Storage Tanks
Bridge and deck abutments
Advantages:
Application:
Hengshui JingTong Rubber Co,LTD
- 5 -
Slabs-on-grade
Culverts and tunnels
Retaining walls
Foundation
Parking garages
In transport and storage, should not impact and damage the
packing,
Not weigh,Placed in ventilated and dry indoors,
Kept away from direct sunlight,
Prohibit contacting acid, alkalis, oil, organic solvent etc.,
Insulated from heat resource
Sold by roll or individually for intersections.Or 25m or 20m per roll
◊ Dumbell
Applications:Ideal for construction joints and contraction joints where
little or no movements are expected.
Features:With the largest and thickest
profile, the dumbbell waterstops can be
used in industrial applications. Meanwhile, it can be heat welded.
◊ Dumbell with Centre Bulb
Package:
Different types:
Storage:
Hengshui JingTong Rubber Co,LTD
- 6 -
Suitable for subsidence, contraction expansion joints, including high
movement joints.
Applications:Ideal for construction, control and expansion joints, on
grade joints at wall / slab junctions.
Features:Capable to withstand large scale of movements. Largest and
thickest profiles make this waterstop ideal for industrial applications.
Meanwhile, it also can be heat-welded by standard splicing iron.
◊ Ribbed flat
Applications:Ideal for construction joints with little or no movement.
Features:The ribs effectively enhance the
bond strength between waterstop and
surrounding concrete; meanwhile, it also
improves water sealing capability of
waterstops.
◊ Ribbed with center bulb
Applications:Ideal for expansion, construction, control joints and other
joints with shear movements.
Features:The center bulb will absorb the
shear movements whether in lateral or
transverse direction. Normally, the bigger the center bulbs are, the
greater movements the waterstops will accommodate. Meanwhile, the
ribs not only make the concrete and waterstop bonding together, but also
provide a long fluid-flow path for water-proofing.
◊ Ribbed with tear web
Applications:Ideal for expansion joints with large movements such as
Hengshui JingTong Rubber Co,LTD
- 7 -
tank ring foundations.
Features:The tear web waterstops features its U-shaped center bulb
which will tear when being subjected to
large movements such as joint expansion
and differential settlements. Additionally,
the ribs effectively increases the contact surface between waterstop and
concrete, therefore the waterstop can hold the surrounding concrete
firmly than others without ribs.
◊ Base seal
Applications:Ideal for construction, contraction, control and expansion
joints flat pavement jobs. For example, they
are suitable for runways, large containments
slabs, concrete walls, backfilled retaining
walls, etc.
Features:Base seal waterstop is easiest to install, as well as can be
heated-welded by standard splicing iron.
◊ Split waterstop
Applications:
Split dumbbell: ideal for construction joints with little or no movements;
Split ribbed: ideal for expansion moving
joints on or below grade.
Features:With features similar to dumbbell
and split ribbed waterstops.
◊Cap waterstop
Applications:Ideal for expansion joints with expansion boards.
Hengshui JingTong Rubber Co,LTD
- 8 -
Features:Acting as a fluid tight internal
seal, the cap waterstop is long lasting and
attractive to be installed on the top of
expansion joints. Meanwhile, it efficiently accelerates the project
schedules.
【Hydrophilic expansion waterstop Strip】
This kind of product includes :PZ Type & PN Type.We can provide
products of 150%-600% volume
expansivity. Products can comply
with GB18173.3-2002 polymer
waterproof materials Part 3:
《 Hydrophilic expansion waterstop》.
PN Type Water Swelling Bentonite strip
Cross section of water stop respectively including 12*12、15*15、
10*20、15*20、20*30、20*50、50*50(mm)etc
PZ Type Water Swelling Bentonite Strip
Water swelling expansion water stop is a new type of water stop check of
aquatic products,it passes through vulcanization molding, but different
from general extensibility characteristics and elastic seal wate rfunction.
It can be water swelling,with water to water stop,affection of it to make it
Hengshui JingTong Rubber Co,LTD
- 9 -
more reliable than ordinary waterproof materials.
Package:
(1) 5m-6m in a roll,30m packed in a small carton
(2) According to customer’s requirement is acceptable.
【Geomembrane】
This kind of product includes :Polyethylene geomembrane of low density
and high(middle)density.We can
provide products of 0.5-2.0mm
thickness and of 2-6m
wide.Products comply with
GB/T17643-2011 Geosynthetics
polyethylene geomembrane》.
【Waterproof sheet】
This kind of product includes :EVA,PE,ECB,PVC etc..We can provide
products of 1.2-4.0mm thickness &
2-6m wide.Products comply with:
GB18173.1-2012《Polymer
waterproof materials Part 1:
Waterproof sheet 》and
KEJIJI[2008]No.21 document.
二、Culvert & Pipeline Inflated Rubber Balloons【Culvert Rubber Balloons】
Rubber inflatable balloon is polymer composite materials processing
product, it is the use of high-strength synthetic fiber fabrics withstand the
force skeleton, inside and outside the vulcanized synthetic rubber
adhesive protective layer of tape to do, according to the design
Hengshui JingTong Rubber Co,LTD
- 10 -
dimensions of a high temperature curing process made specifications,
more size, more pressure rubber
inflatable balloon shapes,
depending on the size of the
bridge, gutter size, tunnel size,
inflatable pressure reaches the
standard post-tensioned
concrete pre-casting project tensioned beams, the initial setting of
concrete grade to be after drain rubber inflatable balloon gas, pulled out
after the rubber inflatable balloon, scrub clean after storage, until the
next re-use, with a high compressive strength, good flexibility, strong
tightness, and used repeatedly, is a new lower cost bridge construction,
water conservancy, the tunnel project costs, and increase the speed of
the amount of pre-engineering concrete products supporting products.
Section Shape:
1> Diameter (D) : From 0.1m to 2.2 m.
2>Total Length (TL) : From 0.5 m to 28m.
3>Other specification also available upon customer’s request.
Pressure
Diameter(mm) Pressure(Mpa)
Hengshui JingTong Rubber Co,LTD
- 11 -
150 0.08
160~190 0.08
200~220 0.07
230 0.06
240~280 0.05
300~370 0.045
380~480 0.04
500~520 0.035
550~600 0.03
620~680 0.025
700 0.02
620~680 0.025
700 0.02
Technical parameters:
【Rubber Pipe Plug】
Rubber Pipe Plug (Duct pipeline occluder) is made by enhancing
natural rubber, each pipe sealing bag before delivery, will be 1.5 times
Hengshui JingTong Rubber Co,LTD
- 12 -
the rated working pressure and diameter corresponding model test
conditions. In order to ensure
the strength of the pipe sealing
balloon structure, we use a
safety factor to the tube three
times the rated working
pressure seal. Pipeline shutoff
balloon by balloon, pressure gauge, three, six meters long special
pneumatic hose, pump components. Floors in the building closed water
tests can withstand 2-6 storey natural water pressure.Duct sealing bag
suitable for sealing all kinds of cast iron repair pipes, glass pipes, PVC
pipes, PPR pipes, double-wall spiral pipe, etc., maintenance side
leakage. The pipe sealing balloon compared with other pipe sealing bag,
light weight, easy to carry, easy to operate, features simple construction.
Pipeline Plug:
Hengshui JingTong Rubber Co,LTD
- 13 -
三、Bridge & Building Bearing【Elastomer Bearing Pad】
This kind of product includes :Plain elastomer bearing,PTFE sliding
bearing,(steel-reinforced) .The
products can comply with:JT/T4-2004
plate type elastomeric bearing for
highway bridges, TB/T1893-2006
Elastomeric bearing for railway bridges
& GB20688.4 - 2007 Normal rubber bearing.
Models and the suitable temperature
Neoprene: + 60 ℃ to 25 ℃
Natural rubber type: 60 ℃ ~ + 40 ℃
The ternary 3-20 type: + 60 ℃ ~ 45 ℃
Mechanical Properties
Item Index
Ultimate compressive strength Ru(Mpa) ≥70
Compressive modulus of elasticity E (Mpa) E±E×20%
Elasticity of shear modulus G1(Mpa) G±G×15%
Elasticity of shear modulus after aging G2(Mpa) G±G×15%
Found angle tangent tanθ Concrete Bridge ≥1/300
Steel Bridge ≥1/500
Found PTFE plate and stainless steel surface friction coefficient
(grease)
≤0.03
Hengshui JingTong Rubber Co,LTD
- 14 -
【Lead Rubber Bearing Isolator (LRB)】
This kind product includes:Elstomeric Seismic protection isolator for
bridges and buildings.It can absorb
earthquake energy effectively by way
of rubber’s elasticity and Lead’s
restorability.Products comply
with :JT/T822-2011 Lead rubber
bearing isolator for highway bridge and GB 20688.3-2006 Elastomeric
seimic protection isolator for buildings.
Features:
◊ Stiff and strong in vertical direction but flexible in horizontal direction.
◊ Absorb earthquake-generated force by changing the bearing’s shape.
◊ Allow the buildings to retain their original shapes and position owing to
the high elastic force of rubber.
◊ Capable to adjust damping amount just by changing the number of
lead plugs.
◊ Excellent vertical load capacity ranging from 5 tonf to 2000 tonf.
◊ Reduce the ground acceleration by extending the structure vibration
period.
◊ High durable and elasticity of the rubber part - not suffer any damages
during and after earthquake.
◊ Easy to install without a separated damper.
◊ Low maintenance.
◊ With stable bi-linear behavior shown as the above picture.
LRB Dimension Table
Size Thickness Modulus Ratio of Lead core
Hengshui JingTong Rubber Co,LTD
- 15 -
Internal Single
Rubber Layer
t1(mm)
Internal
Single Steel
Layer ts(mm)
400 20 ≥ t1 ≥11
≥ 3 ≥ 4 ≥ 3 ≤10
450 20 ≥ t1 ≥11
500 20 ≥ t1 ≥11
550 22 ≥ t1 ≥12
600 25 ≥ t1 ≥13
650 27 ≥ t1 ≥14
700 29 ≥ t1 ≥15
750 31 ≥ t1 ≥16
800 33 ≥ t1 ≥17
850 35 ≥ t1 ≥18
900 37 ≥ t1 ≥19
950 39 ≥ t1 ≥20
1000 41 ≥ t1 ≥21
1050 43 ≥ t1 ≥22
1100 45 ≥ t1 ≥23
1150 47 ≥ t1 ≥24
1200 50 ≥ t1 ≥25
1250 52 ≥ t1 ≥27
1300 54 ≥ t1 ≥28
1350 56 ≥ t1 ≥29
1400 58 ≥ t1 ≥30
1450 60 ≥ t1 ≥31
1500 62 ≥ t1 ≥32
In table : a-Long side size of Square Bearing internal, b-Short side size
of rectangle internal rubber, d0-Circle bearing internal steel plate
diameter, tr-Internal Single Rubber Layer thickness, Tr-Bearing internal
Hengshui JingTong Rubber Co,LTD
- 16 -
rubber total thickness, Tr=n×tr S2=
rTd 0
(Circle bearing)
S2=
rTa(Rectangle bearing short side modulus) S2=
rTb(Rectangle
bearing long side modulus)
【High Damping seismic isolation bearing】
This kind of product is comprised of high-damping rubber & plate
connected with bolts.It is used
under 8 degrees of seismic
intensity in highways and
municipal bridges.Products
comply with : JT/T 842-2012 High
damping seismic isolation rubber
bearing for highway bridges & GB20688.2-2006 Elastomeric seismic
protection isolators for bridges.
【Pot Bearings】
This kind of product includes: GPZ(II), GPZ(2009), GCPZ & JPZ series
pot bearing for highway bridges,
and TPZB(X) series pot bearings
for railway bridges. Products
comply with JT/T 391 -2009 pot
bearings for highway bridges and
TB/T 2331-2013 pot bearings for railway bridges.
Hengshui JingTong Rubber Co,LTD
- 17 -
衡水京通工程橡胶有限公司
HENGSHUI JINGTONG RUBBER CO.,LTD
地址:衡水市桃城区南王庄乡
ADD:NANWANGZHUANG VILLAGE,HENGSHUI CITY,HEBEI PROVINCE,CHINA
电话:0318-2877988
传真:0318-2877988
手机:86-15731809416
邮编:053000
Email: [email protected]