john deere accessories, maintenance, workshop arrachments 2015

Accessories, Maintenance, Workshop & Attachments

2015

3|

Ladies & Gentlemen,On our never-ending journey to further enhance our range of products, we Being an ‘outdoor event’, agriculture has always fascinated by successfully managing a suite of challenges, be they adverse weather conditions, commodity price variations, political decisions or even trade barriers. And especially in times of economic uncertainties, it feels good to be associated with a brand that has a clear vision of the future, owns a sustainable business model and provides genuine parts and accessories to keep production cost under control.

Much of our research & development expense and of our capital investment we devote to improving our products’ performance, to enhance the uptime of John Deere equipment and to reduce the cost of its operation. To achieve these objectives, we are partnering with well selected suppliers, highly engaged dealers and, most importantly, with you as our customers to gain an even better understanding of what you expect from John Deere as a premium brand. Based on your input and feedback and with our technical expertise at hand, we strive to supply diligently engineered and accurately manufactured parts and accessories, cautiously handled by our warehouse personnel and by John Deere dealers.

For 2015 alone, we added 110 new products, an increase of 16 %, to our catalogue, including a new range of high-quality radios, energy-saving LED working lights and a broad line of personal protection equipment. Likewise, we expanded other key product categories to provide an even wider choice of accessories.

On our never-ending journey to further enhance our range of products, we continue to invest into quality assurance, distribution efficiency and into enhanced aftermarket support. And on behalf of the whole John Deere organization, including of course our Dealer of Tomorrow, a special thank you for your trust in the John Deere brand and wishing you a successful year 2015.

Yours sincerely

Christoph Wigger Vice president Agricultural & Turf Sales & Marketing Europe, Northern Africa, Near & Middle East

Editorial

4 | Table of Contents

TABLE OF CONTENTS

Products available in JDPoint through TS programmes B3, A9, A8:

Electrical ...........................................................................................................7• Light Bulbs..................................................................................................8• Cable Ties ................................................................................................. 10• Electrical Wiring ....................................................................................... 11• Fuses, Holders & Fuse boxes ..................................................................... 12• Connectors ............................................................................................... 16• Relays ....................................................................................................... 21• Switches & Warning lamps ........................................................................22• Plugs & Sockets ........................................................................................23• Horns ........................................................................................................23• Beacons .................................................................................................... 24

LED worklights ................................................................................................29

Battery accessories ......................................................................................... 32• Battery Maintenance Chargers .................................................................38• Booster cables ..........................................................................................40

Trailer Accessories .......................................................................................... 42• Trailer Lighting ......................................................................................... 43• Trailer Plugs & Sockets .............................................................................46• Trailer Jack ............................................................................................... 47• Trailer Hardware ......................................................................................48

Heavy Duty Camera Systems ...........................................................................50• Camera kits for 6R Series Tractors with GS3 CommandCenter ..................52• Camera kits for 6R Series Tractors with Generation 4 CommandCenter ... 53• Camera kits for 7R, 8R, 9R Series Tractors .................................................54• Camera kits for Combines and Self Propelled Forage Harvesters .............. 55• Overview John Deere Camera Kits.............................................................56• Universal Heavy Duty Camera Systems .....................................................57

Cargo Handling ..............................................................................................58

Fuel Handling ..................................................................................................60• Fuel Transfer pump ................................................................................... 61• Nozzles and Hoses ....................................................................................62• Bulk Fuel Filters with Water Separation ....................................................63

Liquid Handling ..............................................................................................65• Funnels .....................................................................................................66• Measuring jugs .........................................................................................66• Bucket ......................................................................................................66

Hardware .......................................................................................................68• Lynch Pins ................................................................................................69• R Clips & Cotter Pins .................................................................................71• Springs, Pins & Clips .................................................................................72• Hose Clips ................................................................................................ 74• Sealing & Lubrication ............................................................................... 76• Exhaust clamps ........................................................................................78• Wire Rope Grips .......................................................................................80• D Shackles ................................................................................................80• Snap Hooks ..............................................................................................80• Quick links ...............................................................................................80• Turnbuckles .............................................................................................80• Top link pins, single and dual category,

chain and handle options ........................................................................82• Lower linkage pins, single and dual category

and handle options ..................................................................................84• Implement mounting pins, single and dual category,

adjustable and fixed options ...................................................................85• Top link assemblies and replacement ends ...............................................86• Lower link multi-hole drawbars ................................................................87• Top and lower linkage balls, quick hitch balls,

conversion bushes and spacers ...............................................................88• Clevis, locking and remote locking type, drawbar pins .............................90• Bolt on ball hitch pins, towing balls and ball and clevis assemblies .......... 91

Moisture Testers ............................................................................................. 93• Grain Moisture Testers .............................................................................94• Hay Moisture Testers ...............................................................................96• Baler Mounted Hay Moisture Testers .......................................................97

Tapes ..............................................................................................................98• Tapes – PVC ..............................................................................................99• Tapes – Electrical Insulation .....................................................................99• Tapes – PTFE ............................................................................................99• Tapes – Sealing & Masking .....................................................................100• Packing tapes .........................................................................................100• Security tapes ........................................................................................100

Hand Cleaners .............................................................................................. 101

Wheel Spinners ............................................................................................ 102

Wiper Blades ................................................................................................ 103

5|

Seat Covers/Floor mats .................................................................................104• Seat Covers ............................................................................................ 105• Floor mats .............................................................................................. 116• Protection kit ......................................................................................... 117

Portable lighting / Torches ........................................................................... 118

Knives .......................................................................................................... 121

Ruler ............................................................................................................. 122

Personal Protection Equipment .................................................................... 123• Eye Protection ....................................................................................... 124 • Safety Vest & Safety Set ......................................................................... 126• Gloves .................................................................................................... 127• Safety shoes .......................................................................................... 128

Measuring Devices ....................................................................................... 130• Portable air compressor kit .................................................................... 131• Tyre Pressure Gauge .............................................................................. 132• Combine setting tools ............................................................................ 133• Battery hydrometer ............................................................................... 134• Coolant / Antifreeze Tester .................................................................... 135

Radios & Radio accessories……………………………….. ..................................... 136• Waterproof radios .................................................................................. 136• Radios ..................................................................................................... 138• Audio Accessories .................................................................................. 141

Turf Accessories ............................................................................................ 142• Carts ....................................................................................................... 144• Spreaders ............................................................................................... 145• Gator & Riding Mower Covers ................................................................. 146• Gator & Riding Mower Seat Covers ......................................................... 148• Walk Behind Mower Covers .................................................................... 149• Easy Turner for Riding Mowers* .............................................................. 149

* (Product available in JDPoint through the TS programme RA and RB (NOTE: RC and RB for UK & Ireland, CY for Germany)

High pressure washers ................................................................................. 150• Electrical - Cold water range ................................................................... 151• Petrol engine – cold water ...................................................................... 154• Electrical – hot water .............................................................................. 155• Accessories ............................................................................................. 156• Cleaning Agents ...................................................................................... 160

Products available in JDPoint through TS programme 0T, 8T and BH:

Batteries ...................................................................................................... 164• StrongBox Batteries ............................................................................... 167• Performance Batteries ........................................................................... 172• Standard Batteries ................................................................................. 178• Trojan Batteries for E-Gator ................................................................... 178

Crop Packaging ............................................................................................ 182• John Deere Netwrap .............................................................................. 183• John Deere Twine .................................................................................... 184• John Deere Stretchwrap ......................................................................... 185

Products available in JDPoint through TS program B2:

Knife sharpening tool for round balers and forage wagons .......................... 186

Products available in JDPoint through TS program AE:

John Deere Paints ........................................................................................ 191• Aerosols Paints .....................................................................................204• Can Paints .............................................................................................205

Chemicals ...................................................................................................207

Grease guns ................................................................................................ 212

Pumps ......................................................................................................... 215

Products available through JDMint and JDPoint:

Gator Attachments ..................................................................................... 219

Cargo Box attachments ..............................................................................222

Riding Lawn Equipment Attachments .........................................................223• Snow Blower ......................................................................................... 224• Front Blades & Brooms .........................................................................225• Weights ................................................................................................227• X700 Attachments ...............................................................................228• Accessories for Mower Decks & Machines ............................................. 231• Grass Collecting & Maintenance .............................................................233• X950R Attachments ................................................................................234

Loader & Tractor Attachments ....................................................................237

Table of Contents

It is possible to combine in one single order the products in this catalogue available through the TS programmes B3, A9, A8 with the Collection products (toys, clothing, work wear, merchandise items, etc.).

6 |

Products available in JDPoint through TS programmes B3, A9, A8

Products available in JDPoint through TS programmes B3, A9, A8

7|

Electrical

Electrical

8 |

12v 5w Festoon S8.5d 11 X 38

12v 4w MCC BA9s

12v 5w SBC BA15d

12v 5w SCC BA15s

12v 60/55w UEC P45t Halogen

12v 21w SCC BA15s

12v 21/5w OSP BAY15d

12v 21w SBC BA15d

12v 1w Capless W2X4.6d

12v 10w SCC BA15s

Typical application: Headlamp Package quantity: 10

Part number: MCXFA1001

Equivalent to: Lucas 012 Philips 12596 Osram 64198 GE 52070U

Typical application: Side & Tail Package quantity: 10 Pack content: 2


Equivalent to: Lucas 245 Philips 12814 Osram 5008 GE 2641




Typical application: Indicator & Panel Package quantity: 10 Pack content: 2






Typical application: Stop/Flasher Package quantity: 10 Pack content: 2


Equivalent to: Lucas 335 Philips 12422 GE 91375

Typical application: Stop/Flasher Package quantity: 10 Pack content: 2



Typical application: Interior light Package quantity: 10 Pack content: 2






Typical application: Stop & Tail Package quantity: 10 Pack content: 2



Light Bulbs Original equipment manufacturers names and part numbers are quoted for reference purposes only

mm

mm

mm

mm

mm mm

mm

mm

mm

mm

An extensive range of popular bulbs suitable for many 12v system applications including tractors, cars, harvesters, trailers.

Packed in singles or pairs in dedicated sealed clam packs allowing visibility of the product in the dealer’s showroom.

Light Bulbs (Products available in JDPoint through TS programmes B3, A9, A8)

9|

12v 45/40w ASY P45t

12v 55w H1 P14.5s

12v 55w H3 PK22s

12v 60/55w H4 P43t

12v 55w H7 PX26d

12v 100w H3 PK22s

12v 50w PG13J

12v 55w PG13

Typical application: Headlamp Package quantity: 10



Typical application: Halogen Headlamp Package quantity:10



Typical application: Halogen Headlamp Package quantity: 10








Equivalent to: Lucas 886






Equivalent to: Lucas 887




Light Bulbsand are not intended to suggest that our replacement parts are made by the original equipment manufacturer.

mm

mm

mm

mm

mm

mm

mm

mm

Light Bulbs (Products available in JDPoint through TS programmes B3, A9, A8)

10 |

Nylon 6-6 non-releasable cable ties 295 x 4.8mm






Nylon 6-6 non-releasable cable ties 370 x 4.8mmCable tie assortment, 400 pieces



Minimum tensile strength113kg/1108.1NPack contents: 10


Cable tie assortment, non-releasable, Nylon 6.6. Contents: ■ 100mm x 2.5mm, 8Kg/78.4N breaking strain –

Black x 100, Green x 50, Yellow x 50. ■ 150mm x 3.6mm, 18Kg/176.5N breaking

strain – Black x 50, Green x 25, Yellow x 25. ■ 200mm x 4.8mm, 22Kg/215.7N breaking

strain – Black x 50, Green x 25, Yellow x 25. 400 pieces total contents.


Minimum tensile strength8.1kg/79.4NPack contents: 100








Minimum tensile strength22.2kg/217NPack contents: 100


Minimum tensile strength113kg/1108.1NPack contents: 10






High quality, virgin Nylon 6.6, non-releasable black cable ties. All packed in bag and header card with Euroslot for display.

Tensile strength MIL 23190 E. For continuous use -40° C to +85° C. Flame resistance in accordance with UL94V2.

Cable Ties

Cable Ties (Products available in JDPoint through TS programmes B3, A9, A8)

11|Electrical Wiring

Part Number

Tech description Color DescriptionPack

contentPack Qty

MCXFA1850Single core –

Red 50m 12.75ASuitable for repairs or auxillary applications up to 12V – 12.75A continous use.

1.5mm² cross-sectional area – 21 x 0.3mm strands 1 1


Black 50m 12.75ASuitable for repairs or auxillary applications up to 12V – 12.75A continous use.



Blue 50m 5.75ASuitable for repairs or auxillary applications up to 12V – 5.75A continous use.


MCXFA1853Twin core – 30m 8.75A

Suitable for repairs or auxillary applications up to 12V – 8.75A continous use. 2 x 1.0mm² cross-sectional area – 14 x 0.3mm strands with black sheath

1 1

MCXFA1854Three core – 30m – 5.75A

Suitable for repairs or auxillary applications up to 12V – 5.75A continous use. 3 x 0.7mm² cross-sectional area – 9 x 0.3mm strands with black sheath

1 1

MCXFA1855Seven core –

30m 8.75A / 17.5A

Suitable as a replacment for lighting circuits on trailers, trailed implements and removable lighting kits. Rated at 12V and has 6 x 8.75A and 1 x 17.5A earth return cables.

3 x 0.7mm² cross-sectional area – 9 x 0.3mm (earth) strands with black sheath 1 1

Part Number

Tech description DescriptionPack

contentPack Qty

MCXFA1859 Red 5.75amp – 7m 7m reel of red single core cable suitable for repairs or auxillary applications, contained in a convenient

dispenser. Rated up to 12V – 5.75A for continuous use. 0.7mm² cross-sectional area – 9 x 0.3mm strands.

1 4

MCXFA1860 Black 5.75amp- 7m7m reel of black single core cable suitable for repairs or auxillary applications, contained in a convenient

dispenser. Rated up to 12V – 5.75A for continuous use. 0.7mm² cross-sectional area – 9 x 0.3mm strands.

1 4

MCXFA1861 Blue 5.75amp- 7m7m reel of blue single core cable suitable for repairs or auxillary applications, contained in a convenient

dispenser. Rated up to 12V -5.75A for continuous use. 0.7mm² cross-sectional area – 9 x 0.3mm strands.

1 4

MCXFA1862 Red 8.75amp- 6m6m reel of red single core cable suitable for repairs or auxillary applications, contained in a convenient


1 4

MCXFA1863 Black 8.75amp- 6m6m reel of black single core cable suitable for repairs or auxillary applications, contained in a convenient


1 4

MCXFA1864 Blue 8.75amp- 6m6m reel of blue single core cable suitable for repairs or auxillary applications, contained in a convenient


1 4

MCXFA1865 Red 17.5amp- 3.5m3.5m reel of red single core cable suitable for repairs or auxillary applications, contained in a convenient


1 4

MCXFA1866 Black 17.5amp- 3.5m3.5m reel of black single core cable suitable for repairs or auxillary applications, contained in a convenient


1 4

MCXFA1867 Blue 17.5amp- 3.5m3.5m reel of blue single core cable suitable for repairs or auxillary applications, contained in a convenient


1 4

Cable reels

Mini cable reels

Electrical Wiring (Products available in JDPoint through TS programmes B3, A9, A8)

12 | Fuses, Holders & Fuse boxes

A great selection of handy workshop kits and packaged products. Clampacks are resealable and act as handy storage containers.

20 Amp, Maxi blade fuses – Yellow 70 Amp, Maxi blade fuses – Brown 4 Amp, Mini blade fuses – Pink

30 Amp, Maxi blade fuses – Green 80 Amp, Maxi blade fuses – Clear 5 Amp, Mini blade fuses – Orange

40 Amp, Maxi blade fuses – Orange 100 Amp, Maxi blade fuses – Violet 7.5 Amp, Mini blade fuses – Brown

50 Amp, Maxi blade fuses – Red 2 Amp, Mini blade fuses – Grey 10 Amp, Mini blade fuses – Red

60 Amp, Maxi blade fuses – Blue 3 Amp, Mini blade fuses – Violet 15 Amp, Mini blade fuses – Blue

12V (SAE J1888)Pack Content: 2Pack Qty: 5

Part Number: MCXFA1820





















12V (SAE J2077) Pack Content: 6Pack Qty: 5








Fuses, Holders & Fuse boxes (Products available in JDPoint through TS programmes B3, A9, A8)

13|

3 Amp, Standard blade fuse

5 Amp Standard blade fuse

Red 10 Amp Blow, 8 Amp continuous Pack contents: 10 Package quantity: 5


Violet 3 Amp Blow, 2 Amp continuous Pack contents: 10 Package quantity: 5


Tan 5 Amp Blow, 4 Amp continuous Pack contents: 10 Package quantity: 5


Light Blue 15 Amp Blow, 12 Amp continuous Pack contents: 10 Package quantity: 5


Yellow 20 Amp Blow, 15 Amp continuous Pack contents: 10 Package quantity: 5


Brown 7.5 Amp Blow, 6 Amp continuous Pack contents: 10 Package quantity: 5


Clear/White 25 Amp Blow, 20 Amp continuous Pack contents: 10 Package quantity: 5


Light Green 30 Amp Blow, 25 Amp continuous Pack contents: 10 Package quantity: 5


Fuses, Holders & Fuse boxes

20 Amp, Mini blade fuses – Yellow

25 Amp, Mini blade fuses – Clear

30 Amp, Mini blade fuses – Green 15 Amp Standard blade fuse (DIN)

25 Amp Standard blade fuse (DIN)



7.5 Amp Standard blade fuse (DIN)


Violet 3 Amp Blow, 2 Amp continuous Pack contents: 10 Package quantity: 5


Tan 5 Amp Blow, 4 Amp continuous Pack contents: 10 Package quantity: 5









14 |

4 pole fuse box 8 pole fuse box

35 standard blade fuses

Blade fuse holder

Maxi fuse holder, splash proof Standard blade fuse holder, splash proof

Splash proof fuse holder, designed for use with Maxi fuses. Pack contents: 1 Package quantity: 3


Splash proof fuse holder, designed for use with standard blade fuses. Maximum current 30A. Pack contents: 1 Package quantity: 3


Fuses Selection Packs


Mini Blade Fuse holder

Splash proof Inline fuse holder with wired tails, suitable for use with mini blade fuses.Pack Content: 1Pack Qty: 5



35 mini blade fuses (SAE J2077)40 ceramic fuses (DIN 72581)

Selection pack of 35 standard blade fuses (DIN) in a re-sealable clam, contains following sizes; ■ 3 Amp x 5 Violet ■ 5 Amp x 5 Tan ■ 10 Amp x 5 Red ■ 15 Amp x 5 Light Blue ■ 20 Amp x 5 Yellow ■ 25 Amp x 5 Clear/White ■ 30 Amp x 5 Light Green Contents may vary. Pack contents: 35 Package quantity: 5

Part number MCXFA1038

Selection pack of 35 mini blade fuses (SAE J2077) in a clear plastic re-sealable clam contains following sizes; ■ 3 Amp x 5 ■ 5 Amp x 5 ■ 10 Amp x 5 ■ 15 Amp x 5 ■ 20 Amp x 5 ■ 25 Amp x 5 ■ 30 Amp x 5 Contents may vary. Pack contents: 35. Package quantity: 5


Selection pack of 40 ceramic fuses (DIN 72581) in a clear plastic re-sealable clam contains following sizes; ■ 5 Amp x 10 Yellow ■ 8 Amp x 10 White ■ 16 Amp x 10 Red ■ 25 Amp x 10 Light Blue Contents may vary. Pack contents: 40 Package quantity: 5


Selection pack of 40 glass fuses (SAE J554) in a clear plastic re-sealable clam contains following sizes; ■ 3 Amp x 5 ■ 5 Amp x 5 ■ 10 Amp x 5 ■ 15 Amp x 5 ■ 20 Amp x 5 ■ 25 Amp x 5 ■ 35 Amp x 5 ■ 50 Amp x 5 Pack contents: 40 Package quantity: 5


Blade fuse holder, designed for use with standard blade fuses (DIN). Bankable. Lucar terminals Package quantity: 5


4 pole fuse box, holds 4 standard blade fuses (DIN) (not included). Black plastic body with clear cover. Lucar terminals


8 pole fuse box, holds 8 standard blade fuses (DIN) (not included) Black plastic body with clear cover. Lucar terminals.


Selection pack of 16 maxi fuses (SAE J1888) in a clear plastic re-sealable clam contains following sizes; ■ 20 Amp x 2 ■ 30 Amp x 2 ■ 40 Amp x 2 ■ 50 Amp x 2 ■ 60 Amp x 2 ■ 70 Amp x 2 ■ 80 Amp x 2 ■ 100 Amp x 2, Pack contents: 16 Package quantity: 3


Selection pack of 40 glass fuses (SAE J554) Selection pack of 16 maxi fuses (SAE J1888)

15|

Glass & ceramic fuse kit

Blade fuse kit Maxi blade fuse kit

Mini blade fuse kit

Standard Glass ■ 5 Amp x 30 approx ■ 10 Amp x 30 approx ■ 15 Amp x 30 approx ■ 25 Amp x 30 approx ■ 35 Amp x 30 approx ■ 50 Amp x 30 approx

■ 70 Amp x 5 ■ 80 Amp x 5 ■ 100 Amp x 5 Contents may vary

■ 15 Amp x 40 ■ 20 Amp x 20 ■ 25 Amp x 20 ■ 30 Amp x 20 Contents may vary

■ 25 Amp x 40 ■ 30 Amp x 40 Contents may vary



Contains 480 fuses including Ceramic (DIN 72581), Small Glass (DIN) and Standard Glass (SAE J554) in the following sizes; Ceramic ■ 5 Amp x 50 approx ■ 8 Amp x 50 approx ■ 16 Amp x 50 approx ■ 25 Amp x 50 approx Small Glass (DIN) ■ 2 Amp x 50 approx ■ 5 Amp x 50 approx Contents may vary


Selection pack of 280 high quality blade fuses (DIN) and 5 inline bade fuse holders contains following sizes; ■ 5 Amp x 40 ■ 7.5 Amp x 40 ■ 10 Amp x 40 ■ 15 Amp x 40 ■ 20 Amp x 40


Maxi fuses: Contains 40 high quality Maxi blade fuses (SAE J1888) in the following sizes ■ 20 Amp x 5 ■ 30 Amp x 5 ■ 40 Amp x 5 ■ 50 Amp x 5 ■ 60 Amp x 5


Mini fuses: Contains 240 high quality Mini blade fuses (SAE J2077) in the following sizes; ■ 2 Amp x 20 ■ 3 Amp x 20 ■ 4 Amp x 20 ■ 5 Amp x 20 ■ 7 Amp x 20 ■ 10 Amp x 40


16 |

Large electrical terminal kit Electrical terminal assortmentPolyolefin heat shrink sleeve kit

This has many uses including insulation of bare terminals. Easy to apply. Just slide over component and apply gentle heat. Contains the following sizes and approximate quantities:

■ 20 x 3.2mm in red and black ■ 40 x 6.4mm in black ■ 10 x 9.5mm in red ■ All 150mm in length Contents may vary Pack contents: 70


Connectors

Connectors (Products available in JDPoint through TS programmes B3, A9, A8)

Contains a wide selection of crimp type terminals, including bullet connectors, bullet sockets, cable eyes, spades, male and female Lucar connectors and coupling sleeves.

■ Blue fork terminal x10 ■ Yellow fork terminal x 10 ■ Red bullet, male x 10 ■ Red bullet, female x 10 ■ Blue bullet, male x 10 ■ Blue bullet, female x 10 ■ Red Lucar, male x 10 ■ Red Lucar, female x 10 ■ Blue Lucar, male x 10 ■ Blue Lucar, female x 10 ■ Red Lucar, male & female x 10 ■ Blue Lucar, male & female x 10 ■ Red 5mm ring x 10 ■ Blue 4mm ring x 10 ■ Blue 5mm ring x 10 ■ Blue 6mm ring x 10 ■ Blue 8mm ring x 10 ■ Yellow 6mm ring x 10 ■ Yellow 8mm ring x 10 ■ Yellow 10mm ring x 10 ■ Blue coupling sleeves x 10 ■ Red – conductor size 0.5 – 1.5mm2 / 22-16 awg ■ Blue – conductor size 1.5 – 2.5mm2 / 16-14 awg ■ Yellow – conductor size 4.0 – 6.0mm2 / 12-10 awg,

The pre-insulated terminals that have an antivibration ring (copper) are as follows: male, female, piggy backs, bullets, receptacles. Contents may vary. Pack contents: 210


Contains a selection of 50 crimp type terminals covering the popular types in:

■ 4 x Yellow 8mm eyelets ■ 2 x Blue Butt terminals ■ 2 x Blue 6mm eyelets ■ 2 x Red 5mm eyelets ■ 3 x Red male Bullet ■ 3 x Red female Bullet ■ 4 x Blue male Bullet ■ 4 x Blue female Bullet ■ 3 x Red Piggy back ■ 3 x Blue Piggy back ■ 2 x Blue fork terminals ■ 2 x Red fork terminals ■ 3 x Red male Lucar ■ 4 x Blue male Lucar ■ 4 x Blue female Lucar un-sleeved ■ 3 x Red female Lucar un-sleeved ■ 2 x Yellow fork terminals ■ Red – conductor size 0.5 – 1.5mm² / 22-16 awg ■ Blue – conductor size 1.5 – 2.5mm² / 16-14 awg ■ Yellow – conductor size 4.0 – 6.0mm² / 12-10 awg

The pre insulated terminals that have an anti vibration ring (copper) are as follows: male, female, piggy backs, bullets, receptacles. Contents sizes may vary. Package quantity: 5


17|

Electrical terminals kit – BlueElectrical terminals pack

Connectors


Contains 450 red crimp terminals with copper inserts.

■ 50 x 2.8mm female ■ 50 x 4.8mm female ■ 40 x 4.8mm insulated female ■ 40 x 6.4mm female ■ 40 x 6.4mm male ■ 40 x Female bullet ■ 40 x Male bullet ■ 40 x Piggy back ■ 50 x 5.3mm Ring terminals ■ 50 x Butt terminals,10 x lock

Red – conductor size 0.5 – 1.5mm2 / 22-16 awg. The pre insulated terminals that have an anti vibration ring (copper) are as follows : male, female, piggy backs, bullets, receptacles. Contents may vary.


Contains 470 blue crimp terminals with copper inserts in the following sizes and approximate quantities:

■ 50 x 4.8mm female ■ 50 x 6.4mm female ■ 40 x 6.4mm fully female ■ 50 x 6.4mm male ■ 40 x Female bullet ■ 40 x Male bullet ■ 40 x Piggy back ■ 50 x 4.3mm Ring terminals ■ 50 x 6mm Ring terminals ■ 50 x Butt terminals ■ 10 x lock

Blue – conductor size 1.5 – 2.5mm2 / 16-14 awg. The pre insulated terminals that have an anti vibration ring (copper) are as follows : male, female, piggy backs, bullets, receptacles. Contents may vary.


Clampacks are re-sealable so act as handy storage whilst having a heat-welded appearance. Pre-insulated terminals have a UL approval, E163810. The pre-insulated terminals that have an anti vibration ring (copper) are as follows: male, female, piggy backs, bullets, receptacles.

18 |

Red female bullet terminal 4mm

Blue male bullet terminal 5mm

Red male bullet terminal 4mm

Blue lucar m/f terminal 6.4mm

Red lucar m/f terminal 6.4mm

Yellow ring terminal 6mm

Blue ring terminal 8mm

Blue ring terminal 6mm

Red ring terminal 3.2mm

Blue female bullet terminal 5mm

Blue lucar male terminal 6.4mm

Red lucar male terminal 6.4mm

Yellow lucar female terminal 6.4mm

Blue lucar female terminal 6.4mm

Red lucar female terminal 6.4mm

6.4 mm blue lucar male – conductor size 1.5 – 2.5mm2 / 16-14 awg Pack contents: 10 Package quantity: 5


4 mm red bullet female terminal – conductor size 0.5 – 1.5mm2 / 22-16 awg Pack contents: 10 Package quantity: 5


6 mm yellow ring terminal – conductor size 4.0 – 6.0mm2 / 12-10 awg Pack contents: 10 Package quantity: 5


6.4 mm yellow lucar female – conductor size 4.0 – 6.0mm2 / 12-10 awg Pack contents: 10 Package quantity: 5


4 mm red bullet male terminal – conductor size 0.5 – 1.5mm2 / 22-16 awg Pack contents: 10 Package quantity: 5


6 mm blue ring terminal – conductor size 1.5 – 2.5mm2 / 16-14 awg Pack contents: 10 Package quantity: 5


6.4 mm red lucar male /female – conductor size 0.5 – 1.5mm2 / 22-16 awg Pack contents: 10 Package quantity: 5


5 mm blue bullet female – conductor size 1.5 – 2.5mm2 / 16-14 awg Pack contents: 10 Package quantity: 5


6.4 mm red lucar female – conductor size 0.5 – 1.5mm2 / 22-16 awg Pack contents: 10 Package quantity: 5


6.4 mm red lucar male – conductor size 0.5 – 1.5mm2 / 22-16 awg Pack contents: 10 Package quantity: 5


5 mm blue bullet male – conductor size 1.5 – 2.5mm2 / 16-14 awg Pack contents: 10 Package quantity: 5


8 mm blue ring terminal – conductor size 1.5 – 2.5mm2 / 16-14 awg Pack contents: 10 Package quantity: 5


6.4 mm blue lucar female – conductor size 1.5 – 2.5mm2 / 16-14 awg Pack contents: 10 Package quantity: 5


6.4 mm blue lucar male /female – conductor size 1.5 – 2.5mm2 / 16-14 awg Pack contents: 10 Package quantity: 5


3.2 mm red ring terminal – conductor size 0.5 – 1.5mm2 / 22-16 awg Pack contents: 10 Package quantity: 5


Connectors


19|

Yellow lucar female terminal 9.5mm

Blue scotch lock terminal 2mm

Red sleeve terminal 4mm



Blue sleeve terminal 4.5mm

Blue lucar female terminal 6.4mm



6.4 mm blue lucar female – conductor size 1.5 – 2.5mm2 / 16-14 awg Pack contents: 10 Package quantity: 5


4.5 mm blue sleeve terminal – conductor size 1.5 – 2.5mm2 / 16-14 awg Pack contents: 10 Package quantity: 5


9.5 mm yellow lucar female terminal – conductor size 4.0 – 6.0mm2 / 12-10 awg Pack contents: 10 Package quantity: 5




2 mm blue scotch lock terminal Pack contents: 5 Package quantity: 5


Connectors


4 mm (red sleeve terminal) – conductor size 0.5 – 1.5mm2 / 22-16 awg Pack contents: 10 Package quantity: 5


20 |

Junction box 8 way

Block connector, 5A

Block connector – 2 way


Block connector, 15A



Waterproof junction box with rubber body. 8 way, screw terminals. Maximum dimensions 127mm wide, 108mm long, 42mm deep. 2 x M6 screw mounting, 45mm hole centres


Connecting block, 5 Amp, 12 section. Can be cut as required. Screw terminals. Pack contents: 1 Package quantity: 5


An environmentally sealed connection system that utilises silicone rubber seals and individual towers to provide terminal isolation. Weather-pack connectors are ideally suited for critical applications that require protection from environmental hazards. Pack contents: 1 Package quantity: 3




Connecting block, 15 Amp, 12 section. Can be cut as required. Screw terminals. Pack contents: 1 Package quantity: 5






Connectors


21|

Relay 12V, 20A

Relay 12V, 30/40A

Relay 12V, 70A

Relay 12V, 20/30A

Relay 12V, 40A open

Relay socket

Relays

Relays (Products available in JDPoint through TS programmes B3, A9, A8)

Relay, 12V, 20A. On/Off type , 4 Lucar terminals – complete with mounting bracket. Pack contents: 1 Package quantity: 3


Relay, 30/40A, 12V, changeover type, 5 lucar terminals – optional mounting bracket. Pack contents: 1 Package quantity: 3


Relay 70A, 12V open type, 4 lucar terminals. Pack contents: 1 Package quantity: 3


Relay, 20/30A, 12V, changeover type, 5 lucar terminals – complete with mounting bracket. Pack contents: 1 Package quantity: 3


Relay 40A,12V open type, 4 lucar terminals. Pack contents: 1 Package quantity: 3


Relay socket, suitable for use with relays up to 5 terminals. Complete with 5 crimp type female lucar terminals. Pack contents: 1 Package quantity: 3


22 |

Warning light – Green Warning light – Red

Rocker switch 20ARocker switch 20A

Warning light – Amber

Switches & Warning lamps (Products available in JDPoint through TS programmes B3, A9, A8)

Green panel warning lamp, 12 Volt, 0.08 Amp, 1 Watt. Requires a 12.7mm mounting hole. Lucar connections. Pack contents: 1 Package quantity: 5


Red panel warning lamp.12 Volt, 0.08 Amp, 1 Watt. Requires a 12.7mm mounting hole. Lucar connections. Pack contents: 1 Package quantity: 5


Heavy duty (On/Off) illuminated rocker switch with 4 terminals – for use with relay. 12 Volt, 20 Amp. Fitted with 12 Volt bulb. Supplied with 4 colour discs and various symbols for universal applications. Requires 38.7x18.5mm mounting hole. Pack contents: 1 Package quantity: 3


Heavy duty (On/Off) illuminated rocket switch with 3 terminals. 12 Volt 20 Amp. Fitted with 12 Volt bulb. Supplied with 4 colour discs and various symbols for universal applications. Requires 38.7x18.5mm mounting hole and for use with panels up to 3.8mm depth. Pack contents: 1Package quantity: 3


Amber panel warning lamp.12 Volt, 0.08 Amp, 1 Watt. Requires a 12.7mm mounting hole. Lucar connections. Pack contents: 1 Package quantity: 5


Switches & Warning lamps

Switch ON/OFF Switch ON/ON Switch ON/OFF/ON

Switch flash/OFF/flash Switch flash/OFF Switch ON/OFF LED Red

Switch ON/OFF LED Green Switch ON/OFF LED Amber Switch cover

Metal toggle switch – 2 position on/off, 20mm bulkhead fitting – 25A/12VPack Content: 1Pack Qty: 3


Metal toggle switch – 2 position on/on, 20mm bulkhead fitting – 25A/12VPack Content: 1Pack Qty: 3


Metal toggle switch – 3 position on/off/on, 20mm bulkhead fitting – 25A/12VPack Content: 1Pack Qty: 3


Metal toggle switch – 3 position flash/off/on, 20mm bulkhead fitting – 25A/12VPack Content: 1Pack Qty: 3


Metal toggle switch – 2 position flash/off/on, 20mm bulkhead fitting – 25A/12VPack Content: 1Pack Qty: 3


Metal toggle switch 2 position on/off with red LED illumination – 25A/12VPack Content: 1Pack Qty: 3


Metal toggle switch 2 position on/off with green LED illumination – 25A/12VPack Content: 1Pack Qty: 3


Metal toggle switch 2 position on/off with amber LED illumination – 25A/12VPack Content: 1Pack Qty: 3


Screw on waterproof cover for metal toggle switches Pack Content: 1Pack Qty: 3


23|

Power socket 12/24V

Power plug – cigarette lighter, fused

Power socket, 3 pin

Power plug 12/24V

Power plug, 3 pin

Plugs & Sockets / Horns

Plugs & Sockets (Products available in JDPoint through TS programmes B3, A9, A8)

Power socket suitable for use with 12V or 24V power plugs. Designed for dashboard or panel mounting. Complete with dust cover, 18mm locknut. Pack contents: 1 Package quantity: 3


Power plug with internal fuse. Suitable for use with standard cigarette lighterpower sockets. 12/24V. Maximum 10A. Pack contents: 1 Package quantity: 3


3 pin power socket with a two hole mounting flange (46mm centres). For use with MCXFA1160 plug. Requires 26mm mounting hole for body. Pack contents: 1 Package quantity: 3


Power plug for use with MCXFA1135 type power socket. 12/24V. Pack contents: 1 Package quantity: 3


3 pin power plug for use with MCXFA1161 power plug. Pack contents: 1 Package quantity: 3


Horns (Products available in JDPoint through TS programmes B3, A9, A8)

Horn – high tone Horn – low tone

Horn – high tone, disc type, 12V, 4.5A, 112dB 335Hz +/-5%. Lucar connections and mounting bracket.


Horn – low tone, disc type, 12V, 4.5A, 112dB 335Hz +/-5%. Lucar connections and mounting bracket.


24 |

Beacons (Products available in JDPoint through TS programmes B3, A9, A8)

IP Rating: Dust – waterBeacons must be able to operate reliably under tough conditions for many years. The IP code indicates under which ambient conditions the beacons will be operational. The abbreviation IP stands for “Ingress Protection“. The IP code consists of two digits. The first digit represents the degree that equipment is protected against solid foreign bodies penetrating an enclosure; the second digit represents the degree of protection from various forms of moisture. The higher the number, the tighter the seal.

Flexi mount Beacon – Multipack

FIRST DIGIT: PROTECTION AGAINST ACCIDENTAL CONTACT AND PENETRATION

BY SOLID FOREIGN BODIES IP Dust0 No special protection

1 Protection against solid bodies over 50 mm and against contacts by large surfaces of the human body (e.g. the hands)

2 Protection against solid bodies over 12,5 mm and against finger contact

3 Protection against solid bodies over 2,5 mm (e.g. tools, wires)

4 Protection against penetration of solid bodies with a diameter or thickness over 1 mm (e.g. wires)

5 Dust penetration is not fully excluded, but the quantity that penetrates causes no damaging effects

6 No dust penetration is permitted

7

8

SECOND DIGIT: PROTECTION AGAINST PENETRATION OF LIQUIDS

IP Water0 No waterproofing

1 Protection against the vertical fall of drops of water (e.g. condensation)

2 Protection against the vertical fall of drops of water with a maximum incline of 15°

3 Protection against the vertical fall of drops of water with a maximum incline of 60°

4 Protection against splashes of water from all directions

5 Protection against jets of water from all directions

6 Protection against waves of water or powerful jets

7 Protection against the effects of immersion

8 Protection against the effects of prolonged immersion under pressure

Display counterbox containing 9 pcs. MCXFA1571


Beacons

25|

Flexi mount Beacon Pole mount Beacon Bolt mount Beacon


Magnetic base Beacon Compact flexi mount Beacon Flexi globe beacon

Voltage: 12V Absorption: 4,6 AStructure: Fiberglass reinforced polypropylene base. PMMA dome – screw mount. Worm gear drive. Sintered bush bearing. Anodized aluminum reflector with stepped device for manual rotation. Radio interference filter integrated in the motor.



Voltage: 12V Absorption: 2,9 AStructure: Flexible rubber base, vibration-proof. Unbreakable polycarbonate dome – screw mount. Worm gear drive. Sintered bush bearing. Anodized aluminum reflector with stepped device for manual rotation. Radio interference filter integrated in the motor.

Voltage: 12V Absorption: 4,6 AStructure: Flexible rubber base, vibration-proof. Unbreakable polycarbonate dome – clamp mount. Worm gear drive. Sintered bush bearing. Anodized aluminum reflector with stepped device for manual rotation. Radio interference filter integrated in the motor.

Voltage: 12V Absorption: 4,6 AStructure: Flexible rubber base, vibration-proof. Unbreak-able polycarbonate dome – screw mount. Worm gear drive. Sintered bush bearing. Anodized aluminum reflector with stepped device for manual rotation. Radio interference filter integrated in the motor.

Mounting: Standard ISO DIN AIP Degree: IP 54Rotation per minute: 160 ± 30 r.p.m.Approval: According to REG 65

ECE – ONU with the number A1 E2 0090121

EMC appr.: 2006/28/CE e3 031155


Available also as 9 pcs Display box (MCXFA1591). See page 24 for details.

Mounting: Standard ISO DIN A IP Degree: IP 54Rotation per minute: 160 ± 30 r.p.m.Approval: According to REG 65 ECE – ONU with the

number A1 E2 0090121EMC appr.: 2006/28/CE e3 031155


Mounting: Standard ISO DIN b1 with 3 boltsIP Degree: IP 54Rotation per minute: 160 ± 30 r.p.m.Approval: According to REG 65 ECE – ONU with the

number A1 E2 0090121EMC appr.: 2006/28/CE e3 031155


Mounting: with 2 magnets, self coiling lead and cigarette lighter plug

IP Degree: IP 54Rotation per minute: 160 ± 30 r.p.m.Approval: According to REG 65 ECE – ONU with the

number A1 E2 0090121 EMC appr.: 2006/28/CE e3 031155


Mounting: Standard ISO DIN AIP Degree: IP 54Rotation per minute: 160 ± 30 r.p.m.Approval: According to REG 65 ECE – ONU with

the number A1 E2 0090121EMC appr.: 2006/28/CE e3 031155


Mounting: Standard ISO DIN AIP Degree: IP 66Rotation per minute: 160 ± 30 r.p.m.Approval: According to REG 65 ECE – ONU

with the number A1 E2 0088120EMC appr.: 2006/28/CE e3 031155


Beacons

26 |


Crystal LED Amber Rotating pole mounted DIN A Crystal LED Amber Flashing pole mounted DIN A

Crystal LED Amber Flashing with Magnetic base

8 LED flashing, magnetic basePart number: MCXFA1593

8 LED rotating, pole mounted DIN A Part number: MCXFA1594

8 LED flashing, pole mounted DIN APart number: MCXFA1592

TECHNICAL SPECIFICATIONS ROTATING LED AMBER DIN A and Magnetic FLASHING 8X LED AMBER DIN A and Magnetic

PART NUMBERS8 LED rotating, pole mounted DIN A MCXFA1594

8 LED rotating, magnetic base: MCXFA1595

8 LED flashing, pole mounted DIN A: MCXFA1592

8 LED flashing, magnetic base: MCXFA1593

OPERATING POWER SUPPLY 12 ÷ 24 V DC 12 ÷ 24 V DC

MAX CURRENT ABSORPTION

Voltage MAX Voltage MAX AVG

12 V DC 0.88 A 12 V DC 1.7 A 0.7 A

24 V DC 0.43 A 24 V DC 0.8 A O.35 A

ROTATION PER MINUTE 130 ± 10 R.P.M.2F – 130 ± 10 double flash/min

4F – 130 ± 10 four-flash/min

AVAILABLE BASES – STRUCTURE

Magnetic base (AL) with high adherence Neodymium magnet

DIN A base – (AL + PA 6.6) – screw mount with nut

High efficiency electronic circuit

Internal reflective lens – PMMA (Polymethyl Methaacrylate )

External self-cleaning dome – PC (Polycarbonate)

TECHNICAL CHARACTERISTICS OF

THE ELECTRONIC CIRCUIT

Timer electronic circuit realized with micro-processor for rotating effect according to R65.

Protection block against polarity inversion.

NB: all electronic components used for the a.m. circuit blocks conform to par. 5.1 of

regulation n°65 (ECE-ONU)

Timer electronic circuit realized with micro-processor for flashing effect (2F/4F) according

to R65.

Protection block against polarity inversion.

NB: all electronic components used for the a.m. circuit blocks conform to par. 5.1 of

regulation n°65 (ECE-ONU)

OPERATING TEMPERATURE RANGE -30 °C ÷ + 50 °C

LIGHT OUTPUT

Approved according to REG 65 ECE-ONU with number: TA1 E3 00 7070 Approved according to REG 65 ECE-ONU with number: TA1 E3 00 7105

Measurement degrees Limits Reg.65 (AMBER) Measurement degrees Limits Reg.65 (AMBER)

MAX 0° ≤ 700 MAX 0° ≤ 700

MIN 0° ≥ 100 MIN 0° ≥ 100

MIN +8° ≥ 70 MIN +8° ≥ 70

MIN –8° ≥ 70 MIN –8° ≥ 70

OPTICAL GROUPComposed of 8 LUXEON PHILIPS Led – Mod. REBEL assembled on a printed circuit-board with aluminium base fixed on a round aluminium heat sink. The LED emits light upwards,

and the light is diffused at 360° due a reflective lens (PMMA) placed above it. This increases the efficiency of light and distributes the effect.

DOME COLORIMETRY Amber Polycarbonate – X = 0.565 Y = 0.431

IP PROTECTION DEGREE 66

Beacons

Crystal LED Amber Rotating with Magnetic base

8 LED rotating, magnetic basePart number: MCXFA1595

27|


Beacon Pole bracket-2 bolt stepped base

Beacon Pole bracket-3 bolt circular base

Beacon Pole bracket- 2 bolt, bulkhead fitting

Beacon Pole bracket- 2 bolt, bulkhead fitting

Beacon mounting pole – adjustable with locking nuts

Beacon Pole bracket- 2 bolt, bulkhead fitting with locking nuts

Beacon Pole bracket- 2 bolt rotatable mount for sloping cabs

Beacon pole bracket – weld-on

Beacon Pole bracket- 2 bolt rotatable mount

Beacon Pole bracket- 2 bolt, bulkhead fitting, H/D construction

Adapter socket with base for beacons with ISO DIN A mounting.Structure: White zinc-plated steel with internal brass socket.EPDM black cap


Adapter socket with round base for beacons with ISO DIN A mounting.Structure: White zinc-plated steel with internal brass socket.EPDM black cap


Wall mount adapter socket with round base for beacons with ISO DIN A mounting.Structure: White zinc-plated steel with internal brass socket.EPDM black cap


Wall mount adapter socket with round base for beacons with ISO DIN A mounting.Structure: White zinc-plated steel with internal brass socket.EPDM black cap


Threaded adapter socket, zamac nut for beacons with ISO DIN A mounting.Structure: White zinc-plated steel with internal brass socket.EPDM black cap


Wall mount threaded adapter socket, zamac nut for beacons with ISO DIN A mounting.Structure: White zinc-plated steel with internal brass socket.EPDM black cap


Tilted directional support for cabins for beacons with ISO DIN A mounting.Structure: White zinc-plated steel with internal brass socket.EPDM black cap


Adapter socket to be welded for beacons with ISO DIN A mountingStructure: White zinc-plated steel with internal brass socket.EPDM black cap


Upright directional support for cabins for beacons with ISO DIN A mounting.Structure: White zinc-plated steel with internal brass socket.EPDM black cap


Adapter socket on a 90° mounting bracket with ISO DIN A mountingStructure: White zinc-plated steel, slotted holes and internal brass socket.EPDM black cap


Beacons

28 |

Beacon pole extension – with Q/R handle Replacement Polycarbonate Amber lens – for MCXFA1570, 1571 & 1573 Beacons

Replacement Amber lens – for MCXFA1572 Beacon

Rigid extension arm for ISO DIN A mounting beaconsStructure: White zinc-plated steel with internal brass socket.EPDM black capLength: 500mm


Spare dome for MCXFA1570, 1571 & 1573 Structure: Polycarbonate PC


Spare dome for MCXFA1572Structure: Polycarbonate PC



Beacons

29|

LED worklights (Products available in JDPoint through TS programmes B3, A9, A8)

LED worklights

30 |

125mm

125m

m

55mm

140mm

100m

m

80mm


Powder coated die cast alumminium bodies, robust acrylic lenses and stainless steel fittings. Suitable for agricultural, commercial and industrial applications with 10 – 30V DC power source. Up to 3½ x lower current draw and lasts up to 50 x longer than comparable halogen units. IP67 rated with Flood and Trapezoid lens versions available.

Round LED work light – Trapezoid lens

Oval LED work light – Trapezoid lens

Specifications:

Trapezoid pattern Lens2016 Lumens (Raw) 1728 Lumens (effective) 9 x 3 W LED’sColour Temperature 6000K E approved

Flood Beam Trapezoid Beam

Specifications:

Trapezoid pattern lens1920 Lumens (Raw) 1500 Lumens (effective) 8 x 3 W LED’sColour Temperature 6000KE approved

Dimensions:

Width: 125 mm Height: 125 mm Depth: 55 mm


Dimensions:



LED worklights

31|

130mm

50mm

140mm

100m

m

80mm

115mm

115m

m

70mm

125mm

125m

m

55mm

130mm

50mm


Oval LED work light – Flood lens

Square LED work light – Flood lens

Round LED work light – Flood lens

Rectangular LED work light – Flood lens

Compact square LED work light – Flood lens

Specifications:

Flood pattern lens 1920 Lumens (Raw) 1500 Lumens (effective) 8 x 3 W LED’s Colour Temperature 6000KE approved

Specifications:

Flood pattern lens2880 Lumens (Raw) 1728 Lumens (effective) 16 x 3 W LED’sColour Temperature 6000KE approved

Specifications:

Flood pattern Lens2016 Lumens (Raw) 1728 Lumens (effective) 9 x 3 W LED’s Colour Temperature 6000KE approved

Specifications:

Flood pattern lens960 Lumens (Raw) 720 Lumens (effective) 4 x 3 W LED’sColour Temperature 6000K E approved

Specifications:

Flood pattern lens2000 Lumens (Raw) 2000 Lumens (effective) 1 x 25 W LEDColour Temperature 6000KE approved

Dimensions:



Dimensions:

Width: 115 mm m Height: 115 mm Depth: 70 mm


Dimensions:



Dimensions:

Width: 130 mm Height: 50 mm


Dimensions:



LED worklights

32 | Battery accessories

Battery accessories

33|

Crocodile clips 50A (2)

Battery terminal -ve 8mm

Battery terminal HD -ve 10mm

Battery terminals +/- HD 10mm Battery terminal XHD +ve 14.3mm

Crocodile clips 25A (2)Crocodile clips 5A

Battery terminal +ve 8mm

Battery terminal HD +ve 10mm

Battery terminals +/- 8mm

Battery accessories

Battery accessories (Products available in JDPoint through TS programmes B3, A9, A8)

The complete range of Batteries can be found on pg 164-179

Crocodile cable clips – 50 Amp rating. Pack contents: 2Package quantity: 5


Negative battery terminal for 8mm diameter cable. Solderless design with double clamping screws. Pack contents: 1 Package quantity: 5


Negative heavy duty battery terminal, 10mm cable diameter. Solderless design with double clamping screws. Pack contents: 1 Package quantity: 5


HD battery terminals, pair, positive/negative, 10mm cable diameter. Solderless design with double clamping screws. Pack contents: 2 Package quantity: 5


Extra heavy duty battery terminal. Positive. 14.3mm cable diameter. Solderless design with double clamping screws. Pack contents: 1Package quantity: 5


Crocodile cable clips – 25 Amp rating. Pack contents: 2 Package quantity: 5


Crocodile cable clips - 5 Amp ratingPack contents: 2Package quantity: 5


Positive battery terminal for 8mm diameter battery cable. Solderless design with double clamping screws. Pack contents: 1 Package quantity: 5


Positive heavy duty battery terminal, 10mm cable diameter. Solderless design with double clamping screws. Pack contents: 1Package quantity: 5


Battery terminals, pair, positive/negative, 8mm cable diameter. Solderless design with double clamping screws. Pack contents: 2 Package quantity: 5


34 |

Battery terminal XHD -ve 14.3mm

Extra heavy duty battery terminal. Negative. 14.3mm cable diameter. Solderless design with double clamping screws. Pack contents: 1 Package quantity: 5


Battery terminal double clamp -ve

Battery terminal 8mm bolt -ve

Battery terminal double clamp +ve

Battery terminal 8mm bolt +ve

Positive double clamp terminal suitable for up to 10mm diameter cablePackage quantity: 5


Negative double clamp terminal suitable for up to 10mm diameter cablePackage quantity: 5


Negative battery terminal with single 8mm bolt fixingPackage quantity: 5


Positive battery terminal with single 8mm bolt fixingPackage quantity: 5


Battery terminals +/- XHD 14.3mm

Extra heavy duty battery terminals. Positive/Negative. 14.3mm cable diameter. Solderless design with double clamping screws. Pack contents: 2 Package quantity: 5




Battery accessories

Battery terminal +ve Battery terminal -ve


Positive-90° double clamp terminal suitable for cable diameter up to 12.5mm Pack Content: 1Pack Qty: 5


Negative-90° double clamp terminal suitable for cable diameter up to 12.5mm Pack Content: 1Pack Qty: 5


Positive battery terminal with single 8mm stud fixingPack Content: 1Pack Qty: 5


Negative battery terminal with single 8mm stud fixingPack Content: 1Pack Qty: 5


35|

Battery terminal RH single clamp -ve

Battery terminal 15mm cable -ve

Battery terminal RH single clamp +ve

Battery terminal 15mm cable +ve

Negative battery terminal with a right hand offset and single clamp, suitable for up to 12mm diameter cable.Package quantity: 5




Battery accessories

Negative battery terminal with side clamp suitable for 15mm diameter cablePackage quantity: 5


Positive battery terminal with a right hand offset and single clamp, suitable for up to 12mm diameter cable.Package quantity: 5


Positive battery terminal with side clamp suitable for 15mm diameter cablePackage quantity: 5


Battery terminal 9mm cable -ve

Battery terminal 14.3mm cable -ve

Battery terminal 9mm cable +ve

Battery terminal 14.3mm cable +ve

Negative battery terminal with side clamp suitable for 9mm diameter cablePackage quantity: 5


Positive battery terminal with side clamp suitable for 9mm diameter cablePackage quantity: 5


Negative battery terminal with side clamp suitable for 14.3mm diameter cablePackage quantity: 5


Positive battery terminal with side clamp suitable for 14.3mm diameter cablePackage quantity: 5



Postive battery terminal with 10mm bolt fixingPack Content: 1Pack Qty: 5


Negative battery terminal with 10mm bolt fixingPack Content: 1Pack Qty: 5


36 |

Battery isolator switch 12/24VBattery isolator switch 12/24V



Heavy duty 12/24 Volt, 250 Amp, TIR specification isolator switch with removable key. Maximum Current: 2500 Amp for 5 sec.


Maximum capacity 12 Volt at 1000 Amps for 10 seconds, 24 Volt at 500 Amps for 10 seconds. Supplied with two keys


Battery accessories

Battery terminal LH single clamp -ve Battery terminal LH single clamp +ve

Positive battery terminal with a left hand offset and single clamp, suitable for up to 12mm diameter cable.Package quantity: 5


Battery terminals, quick release, insulated +/- 8mm

Battery eyelet 13mm

Battery terminals, pair, insulated quick release type, +ve/-ve. Suitable for up to 8mm diameter cable. Solderless clamp design. Ideal for applications where easy removal of power supply is required, for example: electric fencer units. Pack contents: 2Package quantity: 5


Battery eyelets, pair. Bolt hole 13mm, cable diameter 11.4mm, cross section 42 – 60mm2. Crimp or solder to cable. Pack contents: 2 Package quantity: 5


Battery eyelet 10.5mm

Battery eyelets, pair. Bolt hole 10.5mm, cable diameter 9.4mm, cross section 27 – 42mm2. Crimp or solder to cable. Pack contents: 2Package quantity: 5


Negative battery terminal with a left hand offset and single clamp, suitable for up to 12mm diameter cable.Package quantity: 5


Battery eyelet 10mm

Battery eyelet 12mm Battery eyelet 8mm

Heavy duty 10mm eyelet suitable for battery and welding cable up to 9mm in diameter with double screw clampingPack Content: 1Pack Qty: 5






37|

Earth strap 150mm

Earth strap 450mm

Earth strap 300mm ring/ring

Earth strap 300mm

Earth strap 600mm

Earth strap 450mm ring/ring

Battery accessories



Braided battery earth strap, heavy duty design with battery terminal and eyelet ends. 150mm longPackage quantity: 3




Braided battery earth strap, heavy duty design with eyelet ends. 300mm longPackage quantity: 3






Braided battery earth strap, heavy duty design with eyelet ends. 450mm longPackage quantity: 3


Battery hydrometer

Pipette type, easy to use battery cell hydrometer. Can be easily dismantled for cleaning. Packaged in blister with simple operator instructions on reverse.Package quantity: 3


38 |

Charge, maintain, recover and extend the life of your vehicle’s battery. John Deere has introduced a range of fully automatic micro processor maintenance Chargers to cover most machine types with lead acid batteries. From 0.8 Amp ‚connect and forget’ models to 90 Amp with selectable charge rates and start/ boost facility, are available. Suitable for all types of lead acid batteries; standard lead-acid, calcium, AGM, start-stop and gel cell.

Battery Maintenance Chargers (Products available in JDPoint through TS programmes B3, A9, A8)


Battery maintenance charger – 0.8A – 2 pin Euro plugBattery maintenance charger – 0.8A – 3 pin UK plug

Battery condition indicator

A connect and forget’ peace of mind solution for out of season use. Developed for the charging and maintenance of smaller capacity batteries up to 32Ah especially ATV’s, ride on mowers, motor-cycles and jet skis. It will however maintain charged larger batteries up to 100Ah.

• Fully Automatic• Multi-stage charging cycle • Easy to read LED monitor• Spark proof and reverse polarity protection • Supplied with quick connect eyelet cable and

battery clamp cable


The LED trafic light system on the battery condition indicator allows quick and easy access to the status of your battery. Easily connected to the battery using 6.4mm eyelets, the 0.55m of 10A cable gives enough length for quick connect and disconnect. suitable for use with MCXFA1650 and MCXFA1653 battery maintainers


A connect and forget’ peace of mind solution for out of season use. Developed for the charging and maintenance of smaller capacity batteries up to 32Ah especially ATV’s, ride on mowers, motorcycles and jet skis. It will however provide maintainance charge for larger batteries up to 100Ah.

• Fully Automatic, • Multi-stage charging cycle , • Easy to read LED monitor, • Spark proof and reverse polarity protection• Supplied with quick connect eyelet cable and

battery clamp cable• Optional battery condition indicator available

MCXFA1656


Booster cables

39|

Battery maintenance charger – 10A – 2 pin Euro plug

A fully automatic maintenance charger with 6 and 12Volt detection, 3 rates of charge and micropro-cessor controlled for maximum performance. Suited to fast charge medium size batteries from 200 -550CCA and maintain charged units over 550CCA and deep cycle batteries. LED display allows easy monitoring of battery status or selection of individual rates of charge.

• Fully Automatic• Auto Voltage detection 6-12V• 2A-6A-10A charging rates – battery size

dependant • Multi-stage charging cycle • Easy to read LED monitor• Spark proof and reverse polarity protection


Battery maintenance charger – 10A – 3 pin UK plug

A fully automatic maintenance charger with 6 and 12Volt detection, 3 rates of charge and micropro-cessor controlled for maximum performance. Suited to fast charge medium size batteries from 200 -550CCA and maintain charged units over 550CCA and deep cycle batteries. LED display allows easy monitoring of battery status or selection of individual rates of charge.

• Fully Automatic• Auto Voltage detection 6-12V• 2A-6A-10A charging rates - battery size

dependant • Multi-stage charging cycle • Easy to read LED monitor• Spark proof and reverse polarity protection


Battery maintenance charger – 90A – 2 pin Euro plug

A fully automatic maintenance charger with boost start facility. This unit provides 6 and 12Volt detection, 3 rates of charge and is microprocessor controlled for maximum performance. Digital and LED display allow easy monitoring of battery status or selection of individual rates of charge.


dependent • 150A Engine boost start• Multi-stage charging cycle • Easy to read LED/Digital monitor• Spark proof and reverse polarity protection


Battery Maintenance Chargers(Products available in JDPoint through TS programmes B3, A9, A8)


Booster cables

Battery maintenance charger – 90A – 3 pin UK plug

A fully automatic maintenance charger with boost start facility. This unit provides 6 and 12Volt detection, 3 rates of charge and is microprocessor controlled for maximum performance. Digital and LED display allow easy monitoring of battery status or selection of individual rates of charge.


dependent • 150A Engine boost start• Multi-stage charging cycle • Easy to read LED/Digital monitor• Spark proof and reverse polarity protection


40 |

Booster cables (Products available in JDPoint through TS programmes B3, A9, A8)


Booster cables

Booster cable clip set 400A Battery booster clamps 600A

Booster cable set 600A 5m

Booster cable extra heavy duty 600A 5m

Booster cable set 600A 3.5m

Booster cable extra heavy duty 600A 5m

Booster cable clips, pair, rated at 400 Amps for 35% of the duty cycle. Pack contents 2


Pair of heavy duty angled battery clamps suitable for cable diameter up to 10.5mmPack Content: 1Pack Qty: 1


Heavy duty booster cable set, 5m long, semi insulated clips. 600A, 25mm² cable


Extra heavy duty booster cable set, 5m long, fully insulated clips. Complete with suppressor to provide protection for sensitive electronic components when boost starting. 600A, 50mm² cable


Heavy duty booster cable set, 3,5m long, semi insulated clips. 600A, 25mm² cable


Extra heavy duty booster cable set, 5m long, fully insulated clips. 600A, 50mm² cable


42 | Trailer Accessories

Trailer Accessories (Products available in JDPoint through TS programmes B3, A9, A8)

43|Trailer Lighting

Trailer Lighting (Products available in JDPoint through TS programmes B3, A9, A8)

Magnetic LED light kit

LED lighting board – 1.4 m

LED Rear light module

LED lighting board – 1.2 m

LED lighting board – 1.4 m with fog light

LED Fog light module

12V DC, vibration resistant and energy efficient light units for long life.

- 12 m and 4 m coiled cable 7 pin plug. - Strong magnets and brackets for reflectors- E approved



- 12 m cable - Durable plastic body with 2 x ø14 mm mounting holes- E approved


12V DC – 4 function, vibration resistant and energy efficient light units for long life

- Replacement for LED lighting boards or bespoke application.

- Size – 100 x 95 mm - 10 LED’s- E approved

Pack contents: 1Package quantity: 4








12V DC – 19 LED’s, vibration resistant and energy efficient light units for long life.

- Replacement for MCXFA2053 or for bespoke application

- Size – 100 x 80 mm - E approved

Pack contents: 1Package quantity: 4


44 |

Marker lamp

Trailer light board

Trailer light board

Rear lamp

Light lens

Marker lamp

Trailer light board

Rear lamp

Light lens

Triangular reflectors


Rubber body front and rear marker lamp. 12V. Red and clear lenses. Complete with bulb. 50mm dia. 70mm bolt centres. Replacement bulb: MCXFA1002. Pack contents: 1 Package quantity: 3


Trailer light board. White PVC 1215 x 139mm. 12V. 4 function rear lights. Complete with bulbs, reflectors and 7m of cable fitted with 7 pin plug. Uses replacement MCXFA1235 light unit & MCXFA1237 lens.


Trailer light set, 12V, 2 piece. Fitted with 4 function lights and triangular reflectors. 6m trailer cable with 7 pin plug. 2m of coiled cable connects the 2 light units. 95mm x 95mm. Use replacement light unit MCXFA1235


Rear light unit, 12V, stop / tail and indicator, with side (number plate) illumination window. Complete with bulbs. 105 x 100 x 50mm. Use MCXFA1238 replacement lens. Pack contents: 1Package quantity: 3


Replacement lens for MCXFA1236. 105mm x 100mm. Pack contents: 1 Package quantity: 3


Rubber body stalk type marker lamp. Red and clear lenses. 70mm x 30mm bolt centres 4 bolt fixing. Replacement bulb: MCXFA1002. Pack contents: 1 Package quantity: 3


White PVC 1350 x 139mm. 12V, 4 function rear lights. Complete with triangular reflectors and 12m of cable fitted with 7 pin plug. Use replacement MCXFA1235 light unit & MCXFA1237 lens.


Rear light unit, 12V, stop/tail and indicator, with side (number plate) illumination window. Replacement unit for MCXFA1232. 97 x 97 x 47mm Pack contents: 1 Package quantity: 3


Replacement lens for light units fitted to MCXFA1232/34 lighting board. 97 x 97mm. Pack contents: 1Package quantity: 3


Pair of 135mm red rear trailer reflectors. Complete with white protective surround, total height 160mm. 2 x 5.8mm diameter mounting holes, 70mm apart. Also suitable for use with trailer lighting boards. Pack contents: 2 Package quantity: 5


Trailer Lighting

45|Trailer Lighting


Trailer light kit 7.5m

Magnetic trailer light kit 12m

Magnetic marker light kit

Coiled connecting cable, 2 x 7 pin plugs

Magnetic trailer light kit 7m

Magnetic trailer light kit with reflector 7m

Trailer electrical extension cable, 3m, 2 x 7 pin plugs

Trailer light set, 12V, 4 function, rear trailer lights with 2.5m of cable between them and 7.5m of cable fitted with a 7 pin plug. Supplied in a handy storage case.


Trailer light set, 12V, magnetic mounting, 4 function rear trailer lights with 4m of cable between them and 12m of cable fitted with a 7 pin plug. Supplied in a handy storage case.


Trailer marker light set, Front/rear pre-wired, 12V, complete with front/rear lights, 2.5m cable between lamps and 7.5m of 5 core cable to 7 pin plug. Complete with triangular trailer reflectors. Magnetic attachment for flexibility. Supplied in a handy storage case.


Coiled 3m cable with two pre-wired 7 pin plugs.


Trailer light set, 12V, magnetic mounting, 4 function rear trailer lights with 2.5m of cable between them and 7m of cable fitted with a 7 pin plug. Supplied in a handy storage case.


Trailer light set, 12V, pre-wired rear lights and rear fog lamp with reflectors, magnetic mounting. 4m of cable between lamps and 12m of 7 core cable to 7 pin plug. Supplied in a handy storage case.


Plain 3m lighting cable that comes with two pre-wired 7 pin plugs. Suitable for trailers with removable cables.


46 |

Plastic 7 pin plug & socket

Plastic 7 pin socket

Metal 7 pin plug

Plastic 13 pin plugTrailing 7 pin socket

Plastic 7 pin plug

Metal 7 pin plug & socket

Metal 7 pin socket

Trailer Plugs & Sockets (Products available in JDPoint through TS programmes B3, A9, A8)

High impact moulded plastic 7 pin trailer plug and socket set. Supplied complete with mounting screws and rubber gasket. Pack contents: 1 Package quantity: 5


High impact moulded plastic 7 pin socket. Supplied complete with mounting screws and rubber gasket. Pack contents: 1 Package quantity: 5


Die cast metal alloy 7 pin trailer plug. Pack contents: 1Package quantity: 5


Trailing socket for 7 pin extension cables. Pack contents: 1 Package quantity: 3


Trailer plug 12V, 13 pin. More recently found on towbar electric systems, the 13 pin plug can combine 7 pin black 12N lighting and grey 12S supplemental power plugs. Benefits include waterproof when connected, connections are electro-plated helping corrosion resistance, coupled by a positive twist lock and each pin can carry up to 25 Amps. Pack contents: 1 Package quantity: 3


High impact moulded plastic 7 pin plug. Pack contents: 1 Package quantity: 5


Die cast metal alloy 7 pin trailer plug and socket set. Supplied complete with mounting screws and rubber gasket. Pack contents: 1 Package quantity: 5


Die cast metal alloy 7 pin trailer socket. Supplied complete with mounting screws and rubber gasket. Pack contents: 1 Package quantity: 5


Trailer Plugs & Sockets

47|Trailer Plugs & Sockets

Trailer Plugs & Sockets (Products available in JDPoint through TS programmes B3, A9, A8)

Plastic 13 pin socket Adaptor plug 13 to 7 pin

7 pin socket mounting plate

Adaptor plug 7 to 13 pin

Plastic trailer socket, 12V, 13 pin, with gasket and fixing screws. More recently found on towbar electrics , the 13 pin socket can combine black 12N lighting socket and grey 12S supplemental power sockets. Benefits include: waterproof when connected, connections are electro-plated helping corrosion resistance, coupled by a positive twist lock and each pin can carry up to 25 Amps. Pack contents: 1 Package quantity: 3


Conversion adaptor 13 pin vehicle to 7 pin trailer. European vehicles are more commonly being fitted with 13 pin sockets. This adaptor enables conversion between new vehicles and trailers with a 7 pin plug that may still be required when used behind other older vehicles. Pack contents: 1Package quantity: 3


Twin mounting holes Ø16.5mm x 85mm hole spacing, black finish. Suitable for use with towing balls and 7 pin sockets. Pack contents 1 Pack quantity 1


Conversion adaptor, 7 pin vehicle to 13 pin trailer. This adaptor enables connection between new trailers supplied with a 13 pin plug and older vehicles with 7 pin sockets. Pack contents: 1 Package quantity: 3


Trailer Jack (Products available in JDPoint through TS programmes B3, A9, A8)

Wheeled jack 400Kg Wheel jack bracket

Trailer wheel jack, shaft diameter 50mm. 400Kg maximum weight, minimum height 540mm, maximum height 760mm. Solid rubber tyre 40mm width and 200mm diameter. Use with MCXFA1221 mounting clamp


Mounting clamp bracket for use with 50mm shaft diameter jacks and MCXFA1220 wheel jack. Mounting holes 10mm diameter and hole centres 95mm


48 | Trailer Hardware

Trailer Hardware (Products available in JDPoint through TS programmes B3, A9, A8)

Tail board drop catch (bolt on) Tail board drop catch (bolt on)

Tail board drop catch (weld on)

Eye plate

Tail gate pin with chain

Tail gate male lug (weld on)

Tail board drop catch (bolt on)

Eye plate

Tail gate female lug (weld on)

Round cotter pin and chain

Bolt on over-centre drop catch. Zinc plated for corrosion resistanceOuter diameter - 20mm/Thread length - 2 1/2” (64mm)/Thread Type - 1/2”UNF/Locating shoulder - Round Ø13mm x 14mmComplete with 3 hole anti rotation washer and Nylock NutSuitable for use with MCXFA1924 and MCXFA1945 keeper platesSupplied in re-sealable clam packPack content: 2Package Qty: 5




Bolt on over-centre drop catch. Zinc plated for corrosion resistanceZinc plated for corrosion resistanceOuter diameter - 20mm/Thread length - 76mm/Thread Type - M12/Locating shoulder - Round Ø13mm x 14mmComplete with Nylock NutSuitable for use with MCXFA1924 and MCXFA1945 keeper platesSupplied in re-sealable clam packPack content: 2Package Qty: 5

Zinc plated for corrosion resistanceSize - 152mm x 50mm x 6.5 mmHole diameter - Ø22mmSuitable for bolting or welding For use with Drop catches MCXFA1920-MCXFA1923Pack content: 2Package Qty: 5


Zinc plated mild steel for corrosion resistanceSize - Ø9.5mm x 109mmChain - 189mm Zinc plated, with Ø132mm ring Pack content: 2Package Qty: 5


Cast steel retaining lug - self coloured Weld on fitmemtOuter Diameter - Ø20mm Locating shoulder - Ø12.5mm x 12mm Slot size - 20mm x 5.5mm Unpainted finish for easy fittment.For use with MCXFA1925 pin. Supplied in re-sealable clam packPack content: 2Package Qty: 5


Cast steel retaining lug - self coloured Weld on fitmemtPin size - Ø19mm x 38mm Overall size - 138mm x 32mm Mounting thickness - 7mm Weld area - 94mm x 32mmUnpainted finish for easy fittment.for use with MCXFA1928 fork and MCXFA1946 pin Pack content: 2Package Qty: 5


Zinc plated locking pin and chain. Over centre locking spring 190mm of zinc plated chainSize - 60mm x 17mmx 4mm tapered blade Suitable for use with MCXFA1926. Supplied in re-sealable clam pack Pack content: 2Package Qty: 5


Zinc plated for corrosion resistanceSize - 244mm x 40mm x 8 mmHole diameter - Ø22mmSuitable for bolting or welding For use with Drop Catches MCXFA1920-MCXFA1923Pack content: 2Package Qty: 5


Bolt on over-centre drop catch. Zinc plated for corrosion resistanceOuter diameter - 20mm/Thread length - 20mm/Thread Type - M12/Locating shoulder - Round, Ø12.5mm x 12.5mm Complete with Nylock NutSuitable for use with MCXFA1924 and MCXFA1945 keeper platesSupplied in re-sealable clam packPack content: 2Package Qty: 5

Weld on over-centre drop catch. Zinc plated for corrosion resistanceOuter diameter - 20mm/Locating shoulder - weld on Round Ø12.5mm x 13mmSuitable for use with MCXFA1924 and MCXFA1945 keeper platesSupplied in re-sealable clam packPack content: 2Package Qty: 5


49|Trailer Hardware

Trailer Hardware (Products available in JDPoint through TS programmes B3, A9, A8)

Tail gate forket Rope hook

Double rope hook Spring bolt - 10mm

Spring bolt - 12mm Spring bolt - 16mm

Tail gate gudgeon pin (bolt on) Lashing ring

Hinge plate Tail gate gudgeon pin (weld on)





Cast steel retaining fork - self coloured Weld on fittmemtInternal diameter - Ø21mm Overall size - 138mm x 32mm Pin hole diameter - 11mm Weld area - 54mm x 35mmUnpainted finish for easy fittment.for use with MCXFA1927 Lug and MCXFA1946 pin Pack content: 2Package Qty: 5

Zinc plated for corrosion resistanceBolt on fittmentPressed steel profileOverall size - 86mm x 20mm x 5.5 mmMounting hole diameter - Ø7mmHook size - 40mm x 5.5mmSupplied in re-sealable clam packPack content: 2Package Qty: 5


Zinc plated for corrosion resistanceHeavy duty designPin diameter - Ø12mm Pin stroke - 35mm Pin locking feature (spring compressed) Mounting plate size - 70 x 40 x 4mm Mounting Holes - 4 x Ø6.5mm Overall length 155mm. Pack content: 1Package Qty: 3

Self - coloured mild steelWeld or Bolt on fittmentSize - 150mm x 40mm x 6mm Hole diameter - Ø13mm Suitable for use with MCXFA1948 and MCXFA1949 gudgeon pinsPack content: 2Package Qty: 5


Zinc plated cast steelBolt-on fittmentPin size - 12.5mm x 48mmOverall length - 95mmHole diameter - Ø8.5mmhole spacing - 38mmSuitable for use with MCXFA1947 hingePack content: 2Package Qty: 5


Zinc plated for corrosion resistanceBolt-on fittmet with cast steel ringRecessed, lay-flat design Overall size - 95mm x 101mmHole diameter - Ø7mmHole spacing - 79mm x 73mmSafe Working Load (S.W.L) - 500KgPack content: 1Package Qty: 5


Self-coloured cast steelWeld-on fittmentPin size - 12.5mm x 40mmOverall length - 95mmWeld area - 45mm x 26mmSuitable for use with MCXFA1947 hingePack content: 2Package Qty: 5


Zinc plated for corrosion resistanceHeavy duty designPin diameter - Ø16mm Pin stroke - 85mm Pin locking feature (spring compressed) Mounting plate size - 130 x 50 x 5mm Mounting Holes - 4 x Ø6.5mm Overall length 255mm.Pack content: 1Package Qty: 3

Zinc plated for corrosion resistanceBolt on fittmentCast steel profileOverall size - 99mm x 23mm x 8 mmMounting hole diameter - Ø8.5mmHook size - 58mm x Ø10mmSupplied in re-sealable clam packPack content: 2Package Qty: 5


Zinc plated for corrosion resistanceHeavy duty designPin diameter - Ø10mm Pin stroke - 40mm Pin locking feature (spring compressed) Mounting plate size - 70 x 40 x 3mm Mounting Holes - 4 x Ø6.5mm Overall length 140mm. Pack content: 1Package Qty: 3

50 |

Heavy Duty Camera Systems


Kits and Single components for John Deere machines

For tractor models 6R, 7R, 8R, and 9R as well as for Combines and Forage Harvesters, John Deere offers customised, easy to install, modular camera kits. Each kit includes a camera and an extension cable as well as a connection or adapter cable. The kits are compatible with the John Deere terminals Generation 4 Command Center, GS3 Command Center Touch and GS3 2630 Display.

Several kits may be necessary depending on the requirement and on the tractor/trailer combination. Typical applications are described on the following pages, also listing the required kits and components. The system components are available as kits and as separate items, allowing the customisation of each system to fit the required application.

51|

Heavy Duty Camera Systems (Products available in JDPoint through TS programmes B3, A9, A8)


John Deere Heavy Duty Camera Systems let you observe your daily work better and enable you to work more efficiently:

■ Reliable transport and operation. With CCTV Video Camera systems cameras you have time to see bystanders and objects. ■ Maximum yield. Unloading auger, towed vehicle, bale ejection – you can selectively monitor work processes in and on the vehicle. ■ Less stress behind the controls. Whether ploughing, spraying, sowing, fertilising or harvesting – you can look forward and still see everything without straining. A camera to monitor operations behind the cab makes your job easier, contributing to a healthy working posture and improved productivity.

John Deere offers complete Camera sets which, in combination with the GreenStar GS3 2630 Display, provide a universal solution for your entire fleet. The system components are available as a kit or as separate items.

The Camera (MCAXE41697)

The camera features CMOS technology and an automatic brightness adjustment to deliver sharp, high contrast images under back light and rapidly changing light conditions.

The rugged die-cast aluminium housing protects the camera against adverse weather conditions and the camera’s high shock and vibration resistance allow use under extremely tough conditions. The camera fulfills the criteria specified for IP69K, including:

■ 100% dustproof and waterproof ■ Withstand high pressure washer applications with no need to dismount the camera before cleaning the equipment.

Extension Cables

Extension cables are available in three different lengths to ensure versatility for different applications. The camera connects to the extension cables with a M12 industry connector, assuring waterproofing features.Available external extension cables:

■ 5m (MC4080413005) ■ 12m (MC4080413012) ■ 16m (MC4080413016)

Adapter and Connection Cables

The adapter and connection cables have been specifically designed to connect the camera either to the John Deere GS3 CommandCenter Touch terminals of 7R, 8R, 9R series tractors and combines or to the John Deere GS3 2630 display.

52 |

GS3 CommandCenter Touch



GS3 2630 Display

Camera kits for 6R Series Tractors with GS3 CommandCenter (Products available in JDPoint through TS programmes B3, A9, A8)

Camera kits for 6R Series Tractors

The camera sets include a board net camera and an extension cable which is available in 5, 12, or 16 metre lengths. The extension cable is directly connected to the factory installed interface cable of the GS3 CommandCenter Touch of the 6R series tractor.

Configuration Rear View Surveillance

Quantity Part Number Components

1 MC6000KIT501

1 Board net CMOS camera (MCAXE41697)

1 Extension cable 5 metres (MC4080413005)

Configuration with Trailer/Attachment

The GS3 2630 Display has been designed to connect up to three cameras. The terminal connection cable is installed inside the cab, while the connections for the extension cable are located outside the cab.


1 MC6000KIT121




1 MC6000KIT501



1 MC2630KIT162



1 Connection cable 3,3 metres (MC4030446003)

1 MCAXE41697 1 Board net CMOS camera1 MC4080413016 1 Extension cable 16 metres

NOTE: If the 6R has no Camera preparation, the following additional parts are required:

Description 6R without Camera preparation WIRING HARNESS, CSM AND SDU, W/ VIDEO PREPARATION / iT4-6R 1x AL210965WIRING HARNESS, ADAPTER, REAR CAMERA / iT4 6R 1x AL210966SCREW, MACHINE 4x 21H1442TYCO CPC SEALING CAP SZ 13 PLSTC 1x 57M10653

Configuration with GS3 2630 Display

53|

Generation 4 Command Center


Camera kits for 6R Series Tractors with Generation 4 CommandCenter (Products available in JDPoint through TS programmes B3, A9, A8)

Camera kits for 6R Series Tractors

The camera sets include a board net camera and an extension cable which is available in 5, 12, or 16 metre lengths.



1 MC6000KIT501



Configuration with Trailer/Attachment Quantity Part Number Components

1 MC6000KIT121



1 MC6RPSKIT501



1 Y Connection cable (MC4030601930)

54 |






1 MC7890KIT501

1 Board net CMOS camera (MCAXE41697)1 Extension cable 5 metres (MC4080413005)

1 Adapter cable 0,3 metres (MC4030440930)


Configuration with Generation 4 Command Center


1 MC7890KIT161



1 Adapter cable 0.3 metres (MC4030440930)

1 MC7890KIT501





1 MC789KIT501



1 Adapter cable 0.3 metres (MC4030440930)

1 MC789KIT121


1 Extension cable 12 metres(MC4080413012)

1 Adapter cable 0.3 metres(MC4030440930)

Camera kits for 7R, 8R, 9R Series Tractors (Products available in JDPoint through TS programmes B3, A9, A8)

Camera kits for 7R, 8R, 9R Series Tractors

The camera sets include a board net camera, an extension cable (available in 5, 12, or 16 metre lengths) and an adapter cable to connect the extension cable to the factory installed interface cable of the Generation 4 Command Center or the GS3 CommandCenter Touch of the 7R, 8R and 9R series tractors.

55|


GS3 2630 Display

GS3 2630 Display


Camera kits for Combines and Self Propelled Forage Harvesters (Products available in JDPoint through TS programmes B3, A9, A8)

Camera kits for Combines and Self Propelled Forage Harvesters

Combine Configuration with GS3 2630 Display


2 MC7890KIT161





1 MC2630KIT161



1 Connection cable 3.3 metres (MC4030446003)

1 MCAXE41697 1 Board net CMOS cameras1 MC4080413012 1 Extension cable 12 metres

Self Propelled Forage Harvester Configuration with GS3 2630 Display

8000 Self Propelled Forage Harvester Configuration with GS3 CommandCenter Touch

The GS3 2630 Display has been designed to connect up to three cameras.

The terminal connection cable is installed inside the cab, while the connections for the extension cable are located outside the cab.


1 MC3071KIT080

1 TFT-Monitor 7" (MC4013071003)

1 Adapter cable 0,8 m (MC4030672980)

56 |

Overview John Deere Camera Kits(Products available in JDPoint through TS programmes B3, A9, A8)

Overview John Deere Camera Kits

Part number

Cam

era

M

CAXE

4169

7

Exte

nsio

n Ca

ble

5

m

MC4

0804

1300

5

Exte

nsio

n Ca

ble

12

m

MC4

0804

1301

2

Exte

nsio

n Ca

ble

16

m

MC4

0804

1301

6

Mon

itor 7

" M

C401

3071

003

Adap

ter C

able

0,

8 m

M

C403

0672

980

Y Co

nnec

tion

cabl

e M

C403

0601

930

Adap

ter c

able

0,

3 m

MC4

0304

4093

0

Conn

ectio

n ca

ble

3,3

m

MC4

0304

4600

3

Model Series

MC6000KIT501 1 1 6R

MC6000KIT121 1 1 6R

MC6000KIT161 1 1 6R

MC7890KIT501 1 1 1 7R, 8R, 9R, S, T, W

MC7890KIT121 1 1 1 7R, 8R, 9R, S, T, W

MC7890KIT161 1 1 1 7R, 8R, 9R, S, T, W

MC2630KIT501 1 1 16R, 7R, 8R, 9R, S, T,

W, SPFH 7000

MC2630KIT121 1 1 16R, 7R, 8R, 9R, S, T,

W, SPFH 7000

MC2630KIT161 1 1 16R, 7R, 8R, 9R, S, T,

W, SPFH 7000

MC2630KIT162 2 2 16R, 7R, 8R, 9R, S, T,

W, SPFH 7000

MC6RPSKIT501 1 1 1 6R fT4



MC3071KIT080 1 1 SPFH 8000

The system components are available as kits and as separate items, allowing the customisation of each system to fit the required application.

57|

Part number

Cam

era

M

CAXE

4169

7

Exte

nsio

n Ca

ble

5

m

MC4

0804

1300

5

Exte

nsio

n Ca

ble

12

m

MC4

0804

1301

2

Exte

nsio

n Ca

ble

16

m

MC4

0804

1301

6

Mon

itor 7

" M

C401

3071

003

Adap

ter C

able

0,

8 m

M

C403

0672

980

Y Co

nnec

tion

cabl

e M

C403

0601

930

Adap

ter c

able

0,

3 m

MC4

0304

4093

0

Conn

ectio

n ca

ble

3,3

m

MC4

0304

4600

3

Model Series

MC6000KIT501 1 1 6R

MC6000KIT121 1 1 6R

MC6000KIT161 1 1 6R

MC7890KIT501 1 1 1 7R, 8R, 9R, S, T, W

MC7890KIT121 1 1 1 7R, 8R, 9R, S, T, W

MC7890KIT161 1 1 1 7R, 8R, 9R, S, T, W

MC2630KIT501 1 1 16R, 7R, 8R, 9R, S, T,

W, SPFH 7000

MC2630KIT121 1 1 16R, 7R, 8R, 9R, S, T,

W, SPFH 7000

MC2630KIT161 1 1 16R, 7R, 8R, 9R, S, T,

W, SPFH 7000

MC2630KIT162 2 2 16R, 7R, 8R, 9R, S, T,

W, SPFH 7000




MC3071KIT080 1 1 SPFH 8000

Universal Heavy Duty Camera Systems(Products available in JDPoint through TS programmes B3, A9, A8)

Universal Heavy Duty Camera Systems



1 MC3071KIT501

1 TFT-Monitor 7" (MC4013071003)

1 System cable 5 metres (MC4030496005)


1 MC4030569005 Tractor cable 5m

1 MC6000KIT121




1 MC3071KIT152

1 TFT-Monitor 7" (MC4013071003)

2 System cables 15 metres (MC4030496015)

2 Board net CMOS cameras (MCAXE41697)

Optional: 2 Extension cable 20m (MC4030496020)


1 MC3071KIT151

1 TFT-Monitor 7" (MC4013071003)

1 System cable 15 metres (MC4030496015 )


1 MC4050035001 1 Radio transmitter

Tractor:1 TFT-Monitor 5,6" (MC4010039001)1 Radio receiver (MC4050036001)

Configuration Self Propelled Forage Harvester camera image transmitted to tractor

Combine Configuration with 7" Monitor

No matter what Agricultural operation you need to perform and no matter what machinery and attachment you use, with the Universal Heavy Duty Camera Systems you’ll have the intelligent camera monitoring system that fits your need.

58 |

Cargo Handling (Products available in JDPoint through TS programmes B3, A9, A8)

Cargo Handling

59|

Cargo Handling (Products available in JDPoint through TS programmes B3, A9, A8)

A range of soft grip handled ratchet tie downs to suit most applications. From light weight domestic to heavy duty commercial uses in a variety of sizes and pack quantities. Produced to GS TÜV and EN 12195-2 specification.

Ratchet tie down – 32mm x 5m



Ratchet tie down 50mm x 10m


Ratchet tie down 50mm x 5m



Bungee strap assortment 10 pcs

Ratchet tie down suitable for medium duty agricultural and horticultural applications. Pack of 2 straps Width – 32mm Length – 5m Breaking force – 2250kg


Ratchet tie down suitable for light duty agricultural, horticultural and domestic applications. Pack of 4 straps Width – 25mm length – 5m Breaking force – 500kg


Ratchet tie down suitable for light duty agricultural, horticultural and domestic applications. width – 25mm length – 5m Breaking force – 500kg


Ratchet tie down suitable for heavy duty agricultural and industrial applications Width – 50mm Length – 10m Breaking force – 5000kg


Ratchet tie down suitable for medium duty agricultural and horticultural applications. Pack of 4 straps Width – 32mm Length – 5m Breaking force – 2250kg


Ratchet tie down suitable for heavy duty agricultural and industrial applications Width – 50mm Length – 5m Breaking force – 5000kg


Ratchet tie down suitable for medium duty agricultural and horticultural applications Width – 32mm Length – 5m Breaking force – 2250kg


Ratchet tie down suitable for light duty agricultural, horticultural and domestic applications. Pack of 2 straps width – 25mm length – 5m Breaking force – 500kg


A convenient pack of 10 assorted length elasticated bungee straps suitable for lighter duty retaining. Produced with soft grip metal hooks and manufactured to G.S TUV specification in a variety of lengths. All packed in a handy reuseable Zip bag. 2 x 450mm, 2 x 600mm, 2 x 800mm 2 x 1000mm, 2 x 1200mm


60 |

Fuel Handling (Products available in JDPoint through TS programmes B3, A9, A8)Fuel Handling (Products available in JDPoint through TS programmes B3, A9, A8)

Fuel Transfer Pumps

61|

Fuel Transfer Pumps (Products available in JDPoint through TS programmes B3, A9, A8)

Fuel Transfer Pumps

Submersible pump kit – 12V DC

A self-priming pump with built in by-pass for diesel and light oil transfer. 40 litres per minute capacity. Supplied with 2m battery cable with heavy duty clips, 4m high quality delivery hose, brass fittings, metal auto-stop delivery nozzle and filter. On/off switch, base mounting plate and carrying handle. Requires 12 volt DC supply.Pack Content: 1Pack Qty: 1


Convenient 12V DC submersible transfer pump kit, ideal for light viscosity fluids. Constructed from durable ABS plastic with a Stainless Steel outer Casing.

Features:- Max flow rate – 18 Ltr/min - Max pressure – 15 PSI- Heavy duty battery clamps - Intergral inlet strainer,- Inline on off switch.- Suitable for transferring diesel, vehicle coolant and water. - Supplied with fuel hose retaining clips and stainless steel nozzle. - CE approved


62 |

Nozzles and Hoses (Products available in JDPoint through TS programmes B3, A9, A8)

Nozzles and Hoses

Fuel delivery nozzle

Universal fuel delivery hose

Automatic shut off fuel delivery nozzle

Fuel delivery hose with brass fittings

Upgrade or replace your existing fuel store or transfer pump delivery nozzle.Constructed from aluminium, steel and ABS plastic and encased in a soft grip insulated handle.

Features:- Automatic shut off- 3/4" bsp, 360˚ swivel female inlet with metal strainer- 80L/min, max flow rate- 3 lockable trigger positions - Soft grip, insulated handle- Suitable for diesel and biodiesel- CE approved


Heavy duty fuel hose. 4m x 3/4" (19mm) I/D hose with swaged 3/4" BSP male fittings. Nitrile Butadiene rubber (NBR) construction with internal stainless steel braiding for strength and flexibility. Suitable for diesel, biodiesel and oil. Suitable replacement hose for MCXFA1723 fuel transfer pump.


Quality aluminium bodied delivery nozzle with angled steel delivery tube.

Features:- Aluminium construction- 80L/min, max flow rate- 2 lockable trigger positions- 1" bsp, 360˚swivel female inlet with with metal strainer- Angled outlet pipe for easier dispensing - Suitable for diesel and biodiesel- CE approved


Heavy duty, 1" (25mm approx) I/D x 4m universal fuel hose suitable for diesel, biodiesel and oil. Nitrile butadiene rubber (NBR) construction and internal stainless steel braiding for strength and flexibility.


63|

Bulk Fuel Filters with Water Separation (Products available in JDPoint through TS programmes B3, A9, A8)

Bulk Fuel Filters with Water Separation

Fuel quality plays a vital role in a machine’s performance and directly affects its associated operating and maintenance costs. John Deere has introduced a spin-on water block filter range to help protect your machinery from dirty fuel. This selection of water separation fuel filter assemblies, replacement filters and connectors can help to prevent inconvenient, costly repairs and expensive down time caused by dirty fuel being transferred from bulk storage into your vehicles.

Water block diesel filter – 70L /min



Water block diesel filter assembly – 70L /min



Replacement spin -on canister for MCXFA1710 assembly. Compatible with other manufacturers systems Flow rate – 70L/min Filter rate – 10 Micron Pressure rating – 12 bar (170 psi) Filter thread – 1" UNF


Replacement spin-on canister for MCXFA1713 assembly. Compatible with other manufacturer’s systems Flow rate – 120L/min Filter rate – 10 Micron Pressure rating – 12 bar (170 psi) Filter thread – 1 1/4" UNF


Replacement spin-on canister for MCXFA1714 assembly. Compatible with other manufacturer’s systems. Flow rate – 150L/min Filter rate – 10 Micron Pressure rating – 12 bar (170 psi) Filter thread – 1 1/2" UNF


Water block fuel filter for bulk storage tanks or transfer systems. Suitable for diesel or heating oil. Aluminium head with Spin-on canister Flow rate – 70L/min Filter rate – 10 Micron Pressure rating – 12 bar (170 psi) Head connection – 1" BSP Filter thread – 1" UNF


Water block fuel filter for bulk storage tanks or transfer systems, suitable for diesel or heating oil. Aluminium head with Spin -on canister Flow rate – 120L/min Filter rate – 10 Micron Pressure rating – 12 bar (170 psi) Head connection – 1 1/4" BSP Filter thread – 1 1/4" UNF


Water block fuel filter for bulk storage tanks or transfer systems, suitable for diesel or heating oil. Aluminium head with Spin-on canister Flow rate – 150L/min Filter rate – 10 Micron Pressure rating – 12 bar (170 psi) Head connection – 1 1/4" BSP Filter thread – 1 1/2" UNF

Pack contents: 1 Pack Qty: 1


64 |

Bulk Fuel Filters With Water Separation – Adaptors and Fittings(Products available in JDPoint through TS programmes B3, A9, A8)

Bulk Fuel Filters with Water Separation

A range of adaptors and fittings suitable for popular installations. It is recommended that PTFE thread tape (MCXFA1170) is used on all adaptor threads when building a system.

Hosetail fitting 1" x 1 1/4" BSPT Male

Adaptor fitting 1" x 1" BSP Female x Female

Adaptor elbow 90° 1" x 1" BSP Female

Reducer 1 1/4" x 1" BSPT/BSP Male x Female

Hosetail fitting 1" x 1" BSPT Male

Adaptor fitting – 1" x 1" BSPT Male x Male

Adaptor fitting 1" x 1" BSPT 60mm Male x Male

Adaptor fitting – 1" x 1" BSP Male x Female

Brass hose tail fitting suitable for 1" internal diameter fuel hose. With 1 1/4" BSPT (taper) thread.Package quantity: 3


Galvanised tube fitting with 1" BSP internal thread.Package quantity: 3


Galvanised 90° elbow fitting with 1" BSP internal thread.Package quantity: 3


Galvanised steel reducer for filter housings. 1 1/4" BSPT (taper) external and 1" BSP internal thread.Package quantity: 3


Brass hose tail fitting suitable for 1" internal diameter fuel hose. With 1" BSPT (Taper) thread.Package quantity: 3


Galvanised steel fitting with hexagonal nut. Thread size 1" BSPT (Taper)Package quantity: 3


Galvanised tube fitting with 1" BSPT (taper) external thread.Package quantity: 3


Zinc plated adaptor fitting with 1" BSP internal and external threads. Package quantity: 3


65|

Liquid Handling (Products available in JDPoint through TS programmes B3, A9, A8)

Liquid Handling

66 |

Liquid Handling (Products available in JDPoint through TS programmes B3, A9, A8)

Liquid Handling

Funnel 3L

Funnel 1.7L

Heavy Duty Polypropelene construction in translucent white to enable clear view of media. Specially designed countoured funnel body enabling easier handling. 3L capacity Ø170mm pouring aperture with hinged lid Anti-splash rim and integral wire mesh filter Removable flexi spout 245mm long. Drum bung connector for 205L barrelPackage quantity: 3


Heavy Duty Polypropelene construction in translucent white to enable clear view of media. Specially designed countoured funnel body enabling easier handling. 1.7L capacity Ø130mmv pouring aperture with hinged lid Anti-splash rim and integral wire mesh filter Removable flexi spout 170mm longPackage quantity: 3


Measuring jug 2L

Measuring jug 1L

Measuring jug 5L

High density translucent polyethylene construc-tion for transferring metered quantities of liquids. 2L capacity (marked in Litres and Quarts) Removable flexi nozzle Screw lid to prevent dirt ingressPackage quantity: 3


High density translucent polyethylene construction for transferring metered quantities of liquids. 1L capacity (marked in Litres and Quarts) Removable flexi nozzle Screw lid to prevent dirt ingressPackage quantity: 5


High density translucent polyethylene construc-tion for transferring metered quantities of liquids. 5L capacity Removable flexi nozzle Screw lid to prevent dirt ingress


Fuel container 5L – Green

Fuel container 10L – Black

Bucket

Durable 5ltr plastic fuel container, John Deere branded and coloured green for unleaded petrol. Twist-on, vented flexispout for smooth pouring. UN approved and complies with SI 1982/630Pack Content: 1Pack Qty: 4


Durable 10ltr plastic fuel container, John Deere branded and coloured black for use with diesel fuel. Twist-on, vented flexispout for smooth pouring. UN approved and complies with SI 1982/630Pack Content: 1Pack Qty: 4


Round plastic bucket with metal handle. John Deere Logo printed on one side. Suitable for a range of garden, work and household jobs. Capacity: 10l.

Part Number: MCV201508001

68 |

Hardware (Products available in JDPoint through TS programmes B3, A9, A8)

Hardware

69|

11mm x 42mm Pear ring

6mm x 42mm Round ring

Lynch Pins & Shaft Locking Pins

Lynch Pins & Shaft Locking Pins(Products available in JDPoint through TS programmes B3, A9, A8)


6mm x 42mm Round ring6mm x 42mm Pear ring

10.5 mm x 44mm Round ring






9.4mm x 42mm Pear ring


10.5 mm x 51mm Round ring

10.5 mm x 42mm Pear ring8.8mm x 42mm Pear ring


Lynch pin pack 8mm x 38mm Pear ring, supplied in a re-sealable clampack Pack contents: 5 Package quantity: 5


Lynch pin pack 10.5 mm x 44mm Round ring, supplied in a re-sealable clampack Pack contents: 5 Package quantity: 5


Lynch pin 9.4mm x 42mm Pear ring, supplied in a white plastic bucket Pack contents: 100


Linch pin 8mm x 42mm, Round ring, supplied in a white plastic bucket Pack contents: 100


Lynch pin pack 8.8mm x 42mm Pear ring, supplied in a re-sealable clampack Pack contents: 5 Package quantity: 5


Lynch pin pack 6mm x 42mm Pear ring, supplied in a re-sealable clampack Pack contents: 5 Package quantity: 5


Lynch pin 11mm x 42mm Pear ring, supplied in a white plastic bucket Pack contents: 100




Lynch pin pack 10.5 mm x 42mm Pear ring, supplied in a re-sealable clampack Pack contents: 5 Package quantity: 5


Lynch pin pack 6mm x 42mm Round ring, supplied in a re-sealable clampack Pack contents: 5 Package quantity: 5


Lynch pin 11mm x 70mm Round ring, supplied in a white plastic bucket Pack contents: 50




Lynch pin pack 10.5 mm x 51mm Round ring, supplied in a re-sealable clampack Pack contents: 5 Package quantity: 5


Lynch pin 8mm x 38mm Pear ring, supplied in a white plastic bucket Pack contents: 100




70 |



Lynch Pins & Shaft Locking Pins(Products available in JDPoint through TS programmes B3, A9, A8)

11mm x 44mm round ring11mm x 51mm Round ring

10,5 mm x 89mm Shaft locking pin

15mm x 60mm Quick hitch ball linch pin Pin and clip assortment10,5 mm x 53mm Quick hitch ball linch pin

9.5mm x 57mm Shaft locking pin8mm x 57mm Shaft locking pin

6mm x 50mm Shaft locking pin

Shaft locking pin 6mm x 50mm Pack contents: 2 Pack quantity: 5


Shaft locking pin 10,5 mm x 89mm Pack contents: 2 Pack quantity: 5


Shaft locking pin 8mm x 57mm Pack contents: 2 Pack quantity: 5




Shaft locking pin 9.5mm x 57mm Pack contents: 2 Pack quantity: 5




Quick hitch ball lynch pin 10,5 mm x 53mm Pack contents: 2 Pack quantity: 5


Quick hitch ball lynch pin 15mm x 60mm Pack contents: 2 Pack quantity: 5


100 popular lynch pins and ‚R‘clips, contained in a white plastic bucket. 10x2.5mm R clips(3/32) 20x3mm R clips(1/8") 20x4mm R clips(5/32") 10x5mm R clips(3/16") 10x6mm linch pins(1/4") 10x9mm linch pins (3/8") 20x11mm linch pins(7/16")


Lynch Pins & Shaft Locking Pins

71|

R Clips & Cotter Pins (Products available in JDPoint through TS programmes B3, A9, A8)

R Clips & Cotter pins

Contains 150 R clips in a handy yellow stacking box, in the following sizes and approximate quantities:

■ 5/64" x 1 5/16" x 30 ■ 5/64" x 1 9/16" x 25 ■ 3/32" x 1 3/32" x 42 ■ 7/64" x 1 5/8" x 25 ■ 9/64" x 1 3/4" x 20 ■ 5/32" x 2 15/16" x 8 Contents may vary.


In re-sealable clam pack

Pack contents: 10 Package quantity: 5

















In a handy yellow plastic stack pack Contains 555 pins in sizes:

■ 1/16" x 1" x 150 ■ 3/32" x 1" x 150 ■ 3/32" x 1 1/2" x 100 ■ 1/8" x 1 1/4" x 75 ■ 1/8" x 2" x 50 ■ 5/32" x 2 1/2" x 30 Contents may vary.


In a handy yellow plastic stack pack Contains 200 cotter pins in the larger sizes

■ 1/8" x 1 1/2" x 50 ■ 5/32" x 2" x 50 ■ 3/16" x 2" x 50 ■ 1/4" x 3" x 30 ■ 5/16" x 3" x 20 Contents may vary.


3.5mm x 65mm R clips

3mm x 55mm R clips 6mm x 115mm R clips

2.5mm x 45mm R clips 5mm x 105mm R clips

Assorted R clips

Cotter pin selection

Cotter pin selection

4mm x 75mm R clips

72 | Springs, Pins & Clips

Springs, Pins & Clips (Products available in JDPoint through TS programmes B3, A9, A8)

In a handy yellow plastic stack pack. Approximately 200 plated springs in a range of diameters, lengths and approximate quantities:

Compression: ■ 7/32" x 1" x 10 ■ 7/32" x 1 1/2" x 10 ■ 1/4" x 13/32" x 10 ■ 9/32" x 1/2" x 10 ■ 9/32" x 3/4" x 10 ■ 23/64" x 1 3/8" x 8 ■ 3/8" x 5/8" x 6 ■ 3/8" x 3/4" x 12 Expansion: ■ 5/32" x 3 1/8" x 12 ■ 3/16" x 1 3/4" x 8 ■ 13/64" x 13/16" x 10 ■ 7/32" x 1" x 10 ■ 1/4" x 7/8" x 10 ■ 5/16" x 1 1/8" x 8 ■ 5/16" x 1 1/4" x 10 ■ 5/16" x 1 3/4" x 12 ■ 9/32" x 1 1/2" x 10 ■ 9/32" x 2" x 12 ■ 11/32" x 1 7/16" x 10 ■ 11/32" x 1 27/32" x 12 Contents may vary.


Supplied in a handy yellow plastic box

Kit comprising 300 external circlips in 18 sizes. ■ 1/8" x 20 ■ 5/32" x 10 ■ 3/16" x 15 ■ 1/4" x 25 ■ 5/16" x 15 ■ 3/8" x 20 ■ 7/16" x 15 ■ 15/32" x 15 ■ 1/2" x 25 Contents may vary.


Supplied in a handy yellow plastic box

Kit comprising 300 internal circlips in the following sizes: ■ 7/16" x 50 ■ 5/8" x 50 ■ 1/2" x 50 ■ 3/4" x 50 ■ 9/16" x 50 ■ 13/16" x 50 Contents may vary.


■ 19/16" x 15 ■ 5/8" x 20 ■ 3/4" x 25 ■ 13/16" x 15 ■ 7/8" x 20 ■ 1" x 15 ■ 1 1/16" x 15 ■ 1 1/8" x 10 ■ 1 1/4" x 5

Assorted compression and expansion springs Internal circlip assortment

External circlip assortment

Aluminium pop rivets

In a handy yellow stack pack

Contains 560 pieces. Aluminium blind rivets in the following sizes and approximate quantities:


■ 1/8" x 5/16" x 100 ■ 1/8" x 1/2" x 80

■ 3/16" x 1/2" x 55 ■ 3/16" x 3/4" x 30

■ 3/16" x 1" x 10 ■ 5/32" x 1/2" x 50

■ 230 x 1/8" washers Contents may vary.

Aluminium pop rivets 4 x 10mm Aluminium pop rivets 4 x 16mm

Large flange aluminium pop rivets 4.8 x 12mm Large flange aluminium pop rivets 4.8 x 18mm

Pop rivet fasteners4mm diameter x 10mm lengthPack Content: 50Pack Qty: 5


Pop rivet fasteners4mm diameter x 16mm lengthPack Content: 50Pack Qty: 5


Pop rivet fasteners with wide flange for increased hold4.8mm diameter x 18mm lengthPack Content: 50Pack Qty: 5


Pop rivet fasteners with wide flange for increased hold4.8mm diameter x 12mm lengthPack Content: 50Pack Qty: 5


73|Sealing & Lubrication

DIN 1481 ISO 8752

Selection pack of 195 popular metric tension pins ■ 3mm x 12mm x 50 ■ 6mm x 30mm x 20 ■ 4mm x 22mm x 25 ■ 6mm x 50mm x 10 ■ 4mm x 40mm x 20 ■ 8mm x 40mm x 50 ■ 5mm x 30mm x 20 Contents may vary.


DIN 1481 ISO 8752

Contains 375 metric rolled spring pins in sizes ■ 1.5mm x 25mm x 100 ■ 6mm x 25mm x 50 ■ 3mm x 25mm x 75 ■ 6mm x 40mm x 10 ■ 3mm x 50mm x 30 ■ 8mm x 32mm x 10 ■ 5mm x 25mm x 25 ■ 8mm x 50mm x 40 ■ 5mm x 50mm x 25 ■ 10mm x 40mm x 10 Contents may vary.


DIN 1481 ISO 8752

Imperial selection pack of popular imperial tension pins. Contains 30 pins ranging from: ■ 1/8" x 3/4" x 5 ■ 7/32" x 1 1/4" x 5 ■ 5/32" x1" x 5 ■ 1/4" x 1" x 5 ■ 3/16" x 1 1/2" x 5 ■ 5/16" x 2" x 5 Contents may vary.


Imperial roll pin pack

Metric roll pin pack


Metric roll pins

DIN 1481 ISO 8752

Selection pack of 48 popular metric tension pins. ■ 3mm x 12mm x 5 ■ 6mm x 50mm x 5 ■ 4mm x 22mm x 5 ■ 8mm x 40mm x 5 ■ 4mm x 40mm x 5 ■ 8mm x 60mm x 5 ■ 5mm x 30mm x 5 ■ 10mm x 80mm x 5 ■ 6mm x 30mm x 5 Contents may vary.


DIN 1481 ISO 8752

Selection pack of 15 popular metric tension pins ■ 8mm x 60mm x 5 ■ 10mm x 65mm x 5 ■ 10mm x 80mm x 5 Contents may vary.




Part Number Description Pack Content Pack Qty.

MCXFA1900 DIN 1481 ISO 8752, metric tension pins 10mm diameter x 90mm length 5 5





Springs, Pins & Clips (Products available in JDPoint through TS programmes B3, A9, A8)

74 | Hose Clips

Hose Clips (Products available in JDPoint through TS programmes B3, A9, A8)

A range of zinc coated, mild and stainless steel hose clips. 7 mm hexagonal, multi drive head and smooth internal band, presented in clam packaging or bulk quantities for point of sale display.

Hose clip point of sale kit

Suitable for MCXFA2015 – Zinc coated hose clips – Replenishment

A magnetic relocatable point of sale header cardwith barcode sheet and planogram for 9 popular hose clips (hooks and clips not included)


Part number Size Pack Content Pack QtyMCXFA2036 8 – 12 x 9 mm 1 10MCXFA2037 10 – 16 x 9 mm 1 10MCXFA2038 12 – 22 x 9 mm 1 10MCXFA2039 16 – 27 x 12 mm 1 10MCXFA2040 20 – 32 x 12 mm 1 10MCXFA2041 25 – 40 x 12 mm 1 10MCXFA2042 35 – 50 x 12 mm 1 10MCXFA2043 40 – 60 x 12 mm 1 10MCXFA2044 50 – 70 x 12 mm 1 10

75|Hose Clips

Hose Clips (Products available in JDPoint through TS programmes B3, A9, A8)

Stainless steel hose clips

Zinc coated hose clips – Retail packaged Mini Hose clips – Zinc coated and retail packaged

7 popular stainless steel hose clips for superior anti-corrosion protection

Part number SizePack

ContentPackQty

MCXFA2000 8 – 12 x 9 mm 5 5MCXFA2001 10 – 16 x 9 mm 5 5MCXFA2002 12 – 22 x 9 mm 5 5MCXFA2003 16 – 27 x 12 mm 5 5MCXFA2004 20 – 32 x 12 mm 5 5MCXFA2005 25 – 40 x 12 mm 5 5MCXFA2006 35 – 50 x 12 mm 5 5MCXFA2007 40 – 60 x 12 mm 5 5MCXFA2009 50 – 70 x 12 mm 1 5MCXFA2010 70 – 90 x 12 mm 1 5MCXFA2011 80 – 100 x 12 mm 1 5MCXFA2012 90 – 110 x 12 mm 1 5MCXFA2013 110 – 130 x 12 mm 1 5MCXFA2014 130 – 150 x 12 mm 1 5

Part number SizePack

ContentPackQty

MCXFA2024 8 mm x 9 mm 5 5MCXFA2025 9 mm x 9 mm 5 5MCXFA2026 10 mm x 9 mm 5 5MCXFA2027 11 mm x 9 mm 5 5MCXFA2028 12 mm x 9 mm 5 5MCXFA2029 13 mm x 9 mm 5 5MCXFA2030 14 mm x 9 mm 5 5MCXFA2031 15 mm x 9 mm 5 5MCXFA2032 16 mm x 9 mm 5 5MCXFA2033 17 mm x 9 mm 5 5

Part number Size Pack Content Pack QtyMCXFA2017 8 – 12 x 9 mm 5 3MCXFA2018 12 – 22 x 9 mm 5 3MCXFA2019 16 – 27 x 12 mm 5 3MCXFA2020 20 – 32 x 12 mm 5 3MCXFA2021 25 – 40 x 12 mm 5 3MCXFA2022 35 – 50 x 12 mm 5 3MCXFA2023 40 – 60 x 12 mm 5 3

76 |

Grease nipples – metric

Imperial o ring assortment

Metric o ring assortment

Injector washers

Sealing & Lubrication (Products available in JDPoint through TS programmes B3, A9, A8)

In a handy yellow plastic stack pack

Contains copper injector sealing washers in the following sizes and approximate quantities:


Metric selection pack comprising of an assortment of straight, 45° and 90° angle grease nipples in a sturdy plastic box, ideal for workshop and van use.

■ 3mm x 1.5mm x 20 ■ 4.4mm x 2mm x 20 ■ 5mm x 2mm x 18 ■ 7mm x 1.5mm x 23 ■ 10mm x 1.5mm x 23 ■ 10mm x 2.5mm x 14 ■ 11mm x 2.5mm x 13 ■ 13mm x 1.5mm x 23 ■ 13mm x 2.5mm x 14

■ 14mm x 2.5mm x 13 ■ 16mm x 2.5mm x 14 ■ 18mm x 2.5mm x 14 ■ 18mm x 3.5mm x 10 ■ 19mm x 2.5mm x 13 ■ 20mm x 3.5mm x 10 ■ 21mm x 2.5mm x 14 ■ 22mm x 2.5mm x 13 ■ 22mm x 3.5mm x 10

■ 23.5mm x 3.5mm x 10 ■ 25mm x 3.5mm x 10 ■ 26.5mm x 3.5mm x 10 ■ 28mm x 3.5mm x 10 ■ 30mm x 3.5mm x 10 ■ 31mm x 3.5mm x 10 ■ 33mm x 3.5mm x 10 ■ 34.5mm x 3.5mm x 10 ■ 36mm x 3.5mm x 10

■ 38mm x 3.5mm x 10 ■ 41mm x 3.5mm x 10 ■ 44mm x 3.5mm x 10 ■ 47mm x 3.5mm x 10 ■ 50mm x 3.5mm x 10 Contents may vary.

In a handy storage case

Shore hardness 70 +/- 5, Contains approx 420 Metric O rings in 32 sizes



■ 1/8" x 1/16" x 20 ■ 13/16" x 1/8" x 10 ■ 3/16" x 1/16" x 20 ■ 7/8" x 1/8" x 10

■ 1/4" x 1/16" x 18 ■ 15/16" x 1/8" x 10 ■ 5/16" x 1/16" x 23 ■ 1" x 1/8" x 10

■ 3/8" x 1/16" x 23 ■ 1 1/16" x 1/8" x 10 ■ 1/2" x 1/16" x 23 ■ 1 1/8" x 1/8" x 10

■ 3/8" x 3/32" x 14 ■ 1 3/16" x 1/8" x 10 ■ 7/16" x 3/32" x 13 ■ 1 1/4" x 1/8" x 10

■ 1/2" x 3/32" x 14 ■ 1 5/16" x 1/8" x 10 ■ 9/16" x 3/32" x 13 ■ 1 3/8" x 1/8" x 10

■ 5/8" x 3/32" x 14 ■ 1 7/16" x 1/8" x 10 ■ 11/16" x 3/32" x 14 ■ 1 1/2" x 1/8" x 10

■ 3/4" x 3/32" x 13 ■ 1 5/8" x 1/8" x 10 ■ 13/16" x 3/32" x 14 ■ 1 3/4" x 1/8" x 10

■ 7/8" x 3/32" x 13 ■ 1 7/8" x 1/8" x 10 ■ 3/4" x 1/8" x 10 ■ 2" x 1/8" x 10

■ 6mm x 30,6mm ■ 45° x 15,6mm

■ 45° x 15,10mm x 20 ■ 90° x 15,10mm

■ 90° x 15,10mm

Contents may vary. Pack contents: 110

In a handy storage case

Shore hardness 70 +/- 5 Contains approx 420 Imperial O rings in 32 sizes



■ 6mm x 10mm x 1mm x 20 ■ 8mm x 11mm x 1mm x 20 ■ 10mm x 13mm x 1mm x 20 ■ 10mm x 14mm x 1mm x 20 ■ 10mm x 20mm x 1mm x 20

■ 10mm x 20mm x 2mm x 20 ■ 12mm x 16mm x 1.5mm x 20 ■ 12mm x 18mm x 1.5mm x 20 ■ 14mm x 18mm x 1.5mm x 15 ■ 14mm x 20mm x 1.5mm x 15

■ 16mm x 20mm x 1.5mm x 15 ■ 17mm x 21mm x 1.5mm x 15 ■ 21mm x 25mm x 1mm x 15 ■ 22mm x 27mm x 1mm x 10 Contents may vary.

Sealing & Lubrication

Contents may vary.

77|Sealing & Lubrication

Grease nipples – mixed metric and imperial sizes

Grease nipples – mixed metric and imperial sizes

Grease nipples – metric

Grease nipples – imperial

Sealing & Lubrication (Products available in JDPoint through TS programmes B3, A9, A8)

In a re-sealable clam pack

Imperial selection pack comprising of an assortment of straight, 45º and 90º angle grease nipples in a clear plastic clam. ■ 5/16in drive fit straight x 1 ■ 1/8in BSP 67.5° angle x 1 ■ 1/4in UNF straight x 1 ■ 1/8in BSP straight x 1 ■ 1/8in BSP 45 angle x 1 ■ 5/16in UNF straight x 1 ■ 3/8in BSF straight x 1 ■ 1/4in BSF 67.5° angle x 1 ■ 1/4in UNF straight long x 1 ■ 1/8in BSP 90° angle x 1 Contents may vary. Pack contents: 10 Package quantity: 5


In a re-sealable clam pack

Metric selection pack comprising of an assortment of straight, 45º and 90º angle grease nipples in a clear plastic clam. ■ M6 – 1.00mm straight x 1 ■ M8 – 1.00mm straight x 1 ■ M8 – 1.25mm straight x 1 ■ M6 – 1.00mm 45° angle x 1 ■ M8 – 1.00mm 45° angle x 1 ■ M8 – 1.25mm 45° angle x 1 ■ M6 – 1.00mm 90° angle x 1 ■ M8 – 1.00mm 90° angle x 1 Contents may vary. Pack contents: 8 Package quantity: 5



Selection pack comprising of an assortment of 110 straight, 45°, 90° and 67.5° angle grease nipples in a sturdy plastic box, ideal for workshop and van use. ■ M8 Straight x 20 ■ M8 45° angle x 10 ■ 1/4BSP straight x 10 ■ 1/4UNF 67.5° angle x 5 ■ M10 straight x 5 ■ M10 45° angle x 5 ■ 1/4UNF straight x 30 ■ 1/8BSP 67.5° angle x 5 ■ M6 90° angle x 10 ■ 1/4UNF x 19mm x 10 Contents may vary.



Imperial selection pack comprising of an assortment of 105 pieces straight, 45° and 90° angle grease nipples in a sturdy plastic box, ideal for workshop and van use. ■ 1/4"- 28, x 30 ■ 1/4"- 28, 90° x 15 ■ 1/8" NPT, 45° x 15 ■ 1/4"- 28, 45° x 15 ■ 1/8" NPT, x 15 ■ 1/8" NPT, 90° x 15 Contents size and quantities may vary.


78 |

Exhaust clamps (Products available in JDPoint through programme B3)

Exhaust clamps

A range of M8x1.25 threaded, weather proof, zinc plated exhaust clamps from 29 mm – 102 mm (1 1/8" – 4") to suit a many applications. Supplied with spring washers.

Part Number Product Pack Content Pack Quantity Metric Imperial ThreadMCXFA1620 Exhaust clamp 29mm (1 1/8") 1 10 29 1 1/8 M8 x 1.25MCXFA1621 Exhaust clamp 32mm (1 1/4") 1 10 32 1 1/4 M8 x 1.25MCXFA1622 Exhaust clamp 36mm (1 3/8") 1 10 36 1 3/8 M8 x 1.25MCXFA1623 Exhaust clamp 38mm (1 1/2") 1 10 38 1 1/2 M8 x 1.25MCXFA1624 Exhaust clamp 42mm (1 5/8") 1 10 42 1 5/8 M8 x 1.25MCXFA1625 Exhaust clamp 43mm(1 11/16") 1 10 43 1 11/16 M8 x 1.25MCXFA1626 Exhaust clamp 45mm (1 3/4") 1 10 45 1 3/4 M8 x 1.25MCXFA1627 Exhaust clamp 48mm (1 7/8") 1 10 48 1 7/8 M8 x 1.25MCXFA1628 Exhaust clamp 52mm (2") 1 5 52 2 M8 x 1.25MCXFA1629 Exhaust clamp 54mm (2 1/8") 1 5 54 2 1/8 M8 x 1.25MCXFA1630 Exhaust clamp 58mm (2 1/4") 1 5 58 2 1/4 M8 x 1.25MCXFA1631 Exhaust clamp 60mm (2 3/8") 1 5 60 2 3/8 M8 x 1.25MCXFA1632 Exhaust clamp 65mm (2 1 /2") 1 5 65 2 1/2 M8 x 1.25MCXFA1633 Exhaust clamp 67mm (2 5/8") 1 5 67 2 5/8 M8 x 1.25MCXFA1634 Exhaust clamp 70mm (2 3/4") 1 5 70 2 3/4 M8 x 1.25MCXFA1635 Exhaust clamp 76mm (3") 1 5 76 3 M8 x 1.25MCXFA1636 Exhaust clamp 79mm (3 1/8") 1 5 79 3 1/8 M8 x 1.25MCXFA1637 Exhaust clamp 83mm (3 1/4") 1 5 83 3 1/4 M8 x 1.25MCXFA1638 Exhaust clamp 89mm (3 1/2") 1 5 89 3 1/2 M8 x 1.25MCXFA1639 Exhaust clamp 92mm (3 5/8") 1 5 92 3 5/8 M8 x 1.25MCXFA1640 Exhaust clamp 95mm (3 3/4") 1 5 95 3 3/4 M8 x 1.25MCXFA1641 Exhaust clamp 102mm (4") 1 5 102 4 M8 x 1.25

80 | Wire Rope Grips, D Shackles, Snap Hooks, Quick links & Turnbuckles

Wire Rope Grips, D Shackles, Snap Hooks, Quick links & Turnbuckles (Products available in JDPoint through TS programmes B3, A9, A8)

All products have a galvanised finish.

Part Number Product Pack Pack Shank Overall Overall Internal Internal Qty Content (mm) length width length width (mm) (mm) (mm) (mm)

MCXFA1290 Wire rope grip 3mm 5 4 3,5 20 20 10 3MCXFA1291 Wire rope grip 4.5mm 5 4 5 24 22 11 4,5MCXFA1292 Wire rope grip 6mm 5 4 6 26 22 13 6MCXFA1293 Wire rope grip 8mm 5 4 6 41 35 20 8MCXFA1294 Wire rope grip 9.5mm 5 4 7 42 35 20 9,5MCXFA1295 Wire rope grip 11mm 5 4 7 45 36 25 11

MCXFA1302 D shackles 5mm 5 4 5 32 20 21 10MCXFA1303 D shackles 6mm 5 4 6 40 22 26 14MCXFA1304 D shackles 8mm 5 4 8 50 33 30 17MCXFA1305 D shackles 10mm 5 2 10 62 38 38 20MCXFA1306 D shackles 11mm 5 2 11 70 42 45 21MCXFA1307 D shackles 12mm 5 2 12 75 48 48 26

MCXFA1308 Snap hook 6x60mm 5 2 6 60 29 51 18MCXFA1309 Snap hook 8x80mm 5 2 8 80 40 65 25MCXFA1310 Snap hook 10x100mm 5 2 10 100 50 82 30MCXFA1311 Snap hook 11x120mm 5 2 11 120 58 101 37MCXFA1312 Snap hook 12x140mm 5 2 12 140 66 120 43

MCXFA1313 Quick link 6x58mm 5 2 6 58 26 50 14MCXFA1314 Quick link 8x75mm 5 2 8 75 35 60 18MCXFA1315 Quick link 9x82mm 5 2 9 82 37 63 20MCXFA1316 Quick link 12x106mm 5 2 12 106 51 85 27MCXFA1317 Quick link 16x146mm 5 2 16 146 62 117 31

Part Number Product Pack Pack Thread Min Max Overall Qty Content (mm) length length width (mm) (mm) (mm)

MCXFA1296 Turnbuckle Eye/Eye 10mm 3 1 10 210 295 30 MCXFA1297 Turnbuckle Eye/Eye 12mm 3 1 12 230 310 35 MCXFA1298 Turnbuckle Hook/Eye 10mm 3 1 10 210 295 30MCXFA1299 Turnbuckle Hook/Eye 12mm 3 1 12 240 310 35MCXFA1300 Turnbuckle Hook/Hook 10mm 3 1 10 210 295 30MCXFA1301 Turnbuckle Hook/Hook 12mm 3 1 12 240 310 35

A B C D E

A B C D

81|Wire Rope Grips, D Shackles, Snap Hooks, Quick links & Turnbuckles

82 |

Part Number Product Cat A (Diameter) B (Length) metric imperial metric imperial

MCXFA1475 Top Link pin Cat 0 16 5/8 76 3MCXFA1481 Top Link pin Cat 1 19 3/4 70 2 3/4MCXFA1471 Top Link pin Cat 1 19 3/4 70 2 3/4MCXFA1472 Top Link pin Cat 1 19 3/4 86 3 3/8MCXFA1473 Top Link pin Cat 1 19 3/4 95 3 3/4MCXFA1470 Top Link pin Cat 1 19 3/4 95 3 3/4MCXFA1474 Top Link pin Cat 1 19 3/4 120 4 3/4MCXFA1466 Top Link pin Cat 2 25 1 76 3MCXFA1469 Top Link pin Cat 2 25 1 92 3 5/8MCXFA1468 Top Link pin Cat 2 25 1 95 3 3/4MCXFA1467 Top Link pin Cat 2 25 1 103 4 1/16MCXFA1500 Top Link pin Cat 3 32 1 1/4 120 4 5/8


MCXFA1486 Top link pin with chain Cat 1 19 3/4 70 2 3/4MCXFA1488 Top link pin with chain Cat 1 19 3/4 92 3 5/8MCXFA1487 Top link pin with chain Cat 1 19 3/4 95 3 3/4MCXFA1490 Top link pin with chain Cat 2 25 1 83 3 3/8MCXFA1491 Top link pin with chain Cat 2 25 1 97 3 13/16MCXFA1493 Top link pin with chain Cat 2 25 1 102 4MCXFA1489 Top link pin with chain Cat 2 25 1 103 4 1/16MCXFA1492 Top link pin with chain Cat 2 25 1 142 5 9/16MCXFA1494 Top link pin with chain Cat 3 32 1 1/4 118 4 5/8MXCFA1495 Top link pin with chain Cat 3 32 1 1/4 168 6 5/8

Top link pins, single and dual category, chain and handle options (Products available in JDPoint through programme B3)

Top link pins, single and dual category, chain and handle options

All products displayed on this page have pack quantity 1 and pack content 1

83|

1

1

2

2

Part Number Product Cat A (Diameter) B (Length) C (Length) metric imperial metric imperial metric imperial

MCXFA1484 Top link pin with Handle Cat 1 19 3/4 117 4 5/8 145 5 3/4MCXFA1485 Top link pin with Handle Cat 2 25 1 117 4 5/8 145 5 3/4MCXFA1496 Top link pin with Handle Cat 3 32 1 1/4 117 4 5/8 70 2 3/4MCXFA1497 Top link pin with Handle Cat 3 32 1 1/4 168 6 5/8 80 3 1/8

Part Number Product Cat A (Diameter) B (Length) C (Length) D (Diameter) E (Length) metric imperial metric imperial metric imperial metric imperial metric imperial

1 MCXFA1478 Top Link pin Dual Cat Cat 1/2 19 3/4 68 2 3/4 80 3 1/8 25 1 53 2 1/81 MCXFA1482 Top Link pin Dual Cat Cat 2/3 25 1 75 3 3/4 78 3 1/16 32 1 1/4 56 2 1/42 MCXFA1479 Top Link pin Dual Cat Cat 1/2 19 3/4 66 2 5/8 65 2 7/16 25 1 16 5/82 MCXFA1483 Top Link pin Dual Cat Cat 2/3 25 1 75 3 3/8 113 4 1/16 32 1 1/4 19 3/4

Part Number Product Cat A (Diameter) B (Length) C (Length) D (Diameter) metric imperial metric imperial metric imperial metric imperial

1 MCXFA1480 Top Link pin stepped Cat 1/2 19 3/4 102 4 1/8 22 7/8 25 12 MCXFA1477 Top Link pin stepped Cat 2/1 25 1 71 2 13/16 35 1 3/8 19 3/4

Top link pins, single and dual category, chain and handle options (Products available in JDPoint through programme B3)

Top link pins, single and dual category, chain and handle options


84 |

Part Number Product Cat A (Diameter) B (Length) C (Length) D (Length) E (Diameter) metric imperial metric imperial metric imperial metric imperial metric imperial

MCXFA1330 Lower link pin – dual cat Cat 1/2 22 7/8 165 6 1/2 90 3 1/2 61 2 3/8 28 1 1/8

Part Number Product Cat A (Diameter) B (Length) C (Length) D (Diameter) E (Length) metric imperial metric imperial metric imperial metric imperial metric imperial

MCXFA1329 Lower link pin – dual cat Cat 1/2 22 7/8 69 2 3/4 72 2 7/8 28 1 1/8 10 3/8MCXFA1458 Lower link pin – dual cat Cat 1/2 22 7/8 78 3 1/8 82 3 1/4 28 1 1/8 16 5/8

Part Number Product Cat A (Diameter) B (Length) C (Length) metric imperial metric imperial metric imperial

MCXFA1331 Lower link pin with handle Cat 1 22 7/8 123 4 3/4 145 5 3/4MCXFA1333 Lower link pin with handle Cat 2 28 1 1/8 123 4 3/4 145 5 3/4MCXFA1389 Lower link pin with handle Cat 3 37 1 7/16 118 4 5/8 70 2 3/4MCXFA1390 Lower link pin with handle Cat 3 37 1 7/16 168 6 5/8 70 2 3/4

Part Number Product Cat A (Diameter) B (Length) C (Length) D (Diameter) metric imperial metric imperial metric imperial metric imperial

MCXFA1348 Lower link pin – dual cat Cat1/2 22 7/8 44 1 3/4 53 2 1/8 28 1 1/8MCXFA1321 Lower link pin – dual cat Cat1/2 22 7/8 80 3 1/8 53 2 1/8 28 1 1/8MCXFA1322 Lower link pin – dual cat Cat1/2 22 7/8 53 2 1/8 81 3 1/8 28 1 1/8


MCXFA1476 Lower link pin Cat 1 22 7/8 88 3 1/4MCXFA1332 Lower link pin Cat 2 28 1 1/8 90 3 9/16MCXFA1328 Lower link pin Cat 2 28 1 1/8 152 6 MCXFA1498 Lower link pin Cat 3 37 1 7/16 118 4 5/8MCXFA1499 Lower link pin Cat 3 37 1 7/16 168 6 5/8

Lower linkage pins, single and dual category and handle options (Products available in JDPoint through programme B3)

Lower linkage pins, single and dual category and handle options


85|

Implement mounting pins, single and dual category, adjustable and fixed options (Products available in JDPoint through programme B3)

Implement mounting pins, single and dual category, adjustable and fixed options


Part Number Product Cat A (Diameter) B (Length) C (Length) Threadmetric imperial metric imperial metric imperial

MCXFA1320 Implement pin – adjustable Cat1 22 7/8 38 1 1/2 70 2 3/4 7/8" UNFMCXFA1325 Implement pin – adjustable Cat2 28 1 1/8 53 2 1/8 75 2 15/16 1 1/8" UNC

Part Number Product Cat A (Diameter) B (Length) C (Diameter) D (Length) metric imperial metric imperial metric imperial metric imperial

MCXFA1456 Implement pin – fixed Cat1 22 7/8 42 1 5/8 22 7/8 48 1 7/8 MCXFA1453 Implement pin – fixed Cat2 28 1 1/8 53 2 1/8 22 7/8 51 2

Part Number Product Cat A (Diameter) B (Length) C (Diameter) Threadmetric imperial metric imperial metric imperial

MCXFA1350 Implement pin Cat1 22 7/8 44 1 3/4 22 7/8 5/8" UNFMCXFA1351 Implement pin Cat1 22 7/8 44 1 3/4 22 7/8 7/8" UNFMCXFA1353 Implement pin Cat1 22 7/8 44 1 3/4 28 1 1/8 7/8" UNFMCXFA1319 Implement pin Cat1 22 7/8 44 1 3/4 19 3/4 3/4" UNFMCXFA1324 Implement pin Cat1 22 7/8 44 1 3/4 28 1 1/8 1 1/8" UNFMCXFA1323 Implement pin Cat1 22 7/8 44 1 3/4 25 1 1" UNFMCXFA1326 Implement pin Cat2 28 1 1/8 50 2 28 1 1/8 1 1/8" UNFMCXFA1352 Implement pin Cat2 28 1 1/8 53 2 1/8 22 7/8 7/8" UNFMCXFA1318 Implement pin Cat2 28 1 1/8 53 2 1/8 19 3/4 3/4" UNFMCXFA1327 Implement pin Cat2 28 1 1/8 53 2 1/8 25 1 1" UNFMCXFA1349 Implement pin Cat2 28 1 1/8 54 2 1/8 28 1 1/8 7/8" UNFMCXFA1338 Implement pin Cat3 36,6 1 7/16 46 1 13/16 28 1 1/8 1 1/8" UNF

Part Number Product Cat A (Diameter) B (Length) C (Length) D (Diameter) Threadmetric imperial metric imperial metric imperial metric imperial

MCXFA1454 Implement pin, dual cat – adjustable Cat1/2 22 7/8 44 1 3/4 54 2 1/8 28 1 1/8 1" UNF

Part Number Product Cat A (Diameter) B (Length) C (Length) D (Diameter) Threadmetric imperial metric imperial metric imperial metric imperial

MCXFA1455 Implement pin, dual cat Cat1/2 22 7/8 45 1 3/4 54 2 1/8 28 1 1/8 1" UNFMCXFA1457 Implement pin, dual cat Cat1/2 22 7/8 44 1 3/4 54 2 1/8 28 1 1/8 1" UNC

86 |

1 2

3

Top link assemblies and replacement ends (Products available in JDPoint through programme B3)

Top link assemblies and replacement ends


Part Number Product Cat LH Cat RH Cat Min length A Max length B Tube length C Thread(mm) (") (mm) (") (mm) (") Size

1 MCXFA1397 Top link assembly Cat 0/0 0 0 274 10 13/16 416 16 3/8 190 7 1/2 3/4 UNC1 MCXFA1398 Top link assembly Cat 0/0 0 0 327 12 7/8 470 18 1/2 248 9 3/4 3/4 UNC2 MCXFA1400 Top Link Assembly Cat 1/1 1 1 400 15 3/4 610 24 286 11 1/4 1 1/8 UNC2 MCXFA1403 Top Link Assembly Cat 1/1 1 1 446 17 9/16 654 25 3/4 330 13 1 1/8 UNC2 MCXFA1404 Top Link Assembly Cat 1/1 1 1 484 19 698 27 1/2 368 14 1/2 1 1/8 UNC2 MCXFA1402 Top Link Assembly Cat 1/1 1 1 495 19 1/2 711 28 368 14 1/2 1 1/8 UNC2 MCXFA1401 Top Link Assembly Cat 1/1 1 1 570 22 7/16 724 28 1/2 405 15 15/16 1 1/8 UNC2 MCXFA1405 Top Link Assembly Cat 1/1 1 1 530 20 7/8 768 30 1/4 438 17 1/4 1 1/8 UNC2 MCXFA1399 Top Link Assembly Cat 1/1 1 1 620 24 7/16 838 33 508 20 1 1/8 UNC2 MCXFA1406 Top Link Assembly Cat 1/2 1 2 476 18 3/4 698 27 1/4 368 14 1/2 1 1/8 UNC2 MCXFA1407 Top Link Assembly Cat 1/2 1 2 527 20 3/4 737 29 405 15 15/16 1 1/8 UNC2 MCXFA1408 Top Link Assembly Cat 1/2 1 2 616 24 1/4 838 33 508 20 1 1/8 UNC2 MCXFA1409 Top Link Assembly Cat 2/1 2 1 495 19 1/2 711 28 368 14 1/2 1 1/8 UNC2 MCXFA1411 Top Link Assembly Cat 2/2 2 2 470 18 1/2 730 28 3/4 330 13 1 1/8 UNC2 MCXFA1414 Top Link Assembly Cat 2/2 2 2 508 20 768 30 1/4 368 14 1/2 1 1/8 UNC2 MCXFA1420 Top link Assembly Cat 2/2 2 2 528 20 13/16 792 31 3/16 380 15 1 1/4UNC2 MCXFA1412 Top Link Assembly Cat 2/2 2 2 546 21 1/2 806 31 3/4 405 15 15/16 1 1/8 UNC2 MCXFA1422 Top link Assembly Cat 2/2 2 2 562 22 1/8 824 32 7/16 380 15 1 1/4UNC2 MCXFA1415 Top Link Assembly Cat 2/2 2 2 578 22 3/4 832 32 3/4 438 17 1/4 1 1/8 UNC2 MCXFA1410 Top Link Assembly Cat 2/2 2 2 546 21 1/2 851 33 1/2 406 16 1 1/8 UNC2 MCXFA1421 Top link Assembly Cat 2/2 2 2 621 24 7/16 897 35 5/16 485 19 1/8 1 1/4UNC2 MCXFA1413 Top Link Assembly Cat 2/2 2 2 648 25 1/2 908 35 3/4 508 20 1 1/8 UNC2 MCXFA1424 Top link Assembly Cat 2/2 2 2 648 25 1/2 927 36 1/2 483 19 1 3/8 UNC2 MCXFA1423 Top link Assembly Cat 2/2 2 2 664 26 1/8 929 36 9/16 485 19 1/8 1 1/4UNC2 MCXFA1425 Top link Assembly Cat 3/2 3 2 648 25 1/2 927 36 1/2 483 19 1 3/8 UNC2 MCXFA1426 Top link Assembly Cat 3/3 3 3 648 25 1/2 927 36 1/2 483 19 1 3/8 UNC3 MCXFA1437 Top Link Assembly H/D Cat 2/2 2 2 515 20 1/4 781 30 3/4 380 15 1 1/4 UNC3 MCXFA1438 Top Link Assembly H/D Cat 2/2 2 2 620 24 7/16 886 34 7/8 485 19 1/8 1 1/4 UNC3 MCXFA1439 Top Link Assembly H/D Cat 2/3 2 3 527 20 3/4 793 31 1/4 380 15 1 1/4 UNC3 MCXFA1436 Top link Assembly H/D Cat 2/2 2 2 555 21 7/8 792 31 3/16 380 15 36x3mm3 MCXFA1431 Top link Assembly H/D Cat 2/3 2 3 555 21 7/8 792 31 3/16 380 15 36x3mm3 MCXFA1432 Top link Assembly H/D Cat 3/3 3 3 555 21 7/8 792 31 3/16 380 15 36x3mm3 MCXFA1433 Top link Assembly H/D Cat 2/2 2 2 656 25 13/16 894 35 3/16 485 19 1/8 36x3mm3 MCXFA1434 Top link Assembly H/D Cat 2/3 2 3 656 25 13/16 894 35 3/16 485 19 1/8 36x3mm3 MCXFA1435 Top link Assembly H/D Cat 3/3 3 3 656 25 13/16 894 35 3/16 485 19 1/8 36x3mm

87|

Part Number Product Cat Hand Length A Thread size(mm) (")

MCXFA1428 Replacement top link end Cat 1 LH 197 7 3/4 1 1/8 UNCMCXFA1427 Replacement top link end Cat 1 RH 197 7 3/4 1 1/8 UNCMCXFA1430 Replacement top link end Cat 2 LH 247 9 3/4 1 1/8 UNCMCXFA1429 Replacement top link end Cat 2 RH 247 9 3/4 1 1/8 UNCMCXFA1418 Replacement top link end Cat 2 LH 254 10 1 1/4 UNCMCXFA1419 Replacement top link end Cat 2 RH 254 10 1 1/4 UNCMCXFA1416 Replacement top link end H/D Cat 2 LH 254 10 1 1/4 UNCMCXFA1417 Replacement top link end H/D Cat 2 RH 254 10 1 1/4 UNC

Top link assemblies and replacement ends (Products available in JDPoint through programme B3)

Lower link multi-hole drawbars (Products available in JDPoint through programme B3)

Top link assemblies and replacement ends


Part Colour Number

Product Cat A (Diameter) B (Length) C (Length) Hole Dia Hole qty Tensile strengthmetric imperial metric imperial metric imperial (kg/cm²)

MCXFA1441 Multi-hole Drawbar Cat 1 22 7/8 645 25 3/8 54 2 1/8 21 7 3150MCXFA1442 Multi-hole Drawbar Cat 1 22 7/8 765 30 54 2 1/8 20 11 8000MCXFA1443 Multi-hole Drawbar Cat 2 28 1 1/8 780 30 3/4 54 2 1/8 21 11 8000MCXFA1444 Multi-hole Drawbar Cat 2 28 1 1/8 935 36 7/8 80 3 1/8 26 9 8000MCXFA1440 Multi-hole Drawbar Cat 2 28 1 1/8 963 38 60 2 3/8 22 11 7000MCXFA1445 Multi-hole Drawbar Cat 2 28 1 1/8 963 38 80 3 1/8 28 7 3150MCXFA1446 Multi-hole Drawbar Cat 3 36 1 15/16 1088 42 7/8 110 4 3/8 32 7 8000+

88 |

Part Number Product Pack Qty Pack Cat A Diameter B Hole Diameter contents metric imperial metric imperial

MCXFA1344 Quick hitch ball spacer – lower link 1 2 2 56 2 3/16 28,7 1 1/8MCXFA1342 Quick hitch ball spacer – lower link 1 2 3 – 2 64 2 1/2 28,7 1 1/8MCXFA1343 Quick hitch ball spacer – lower link 1 2 3 64 2 1/2 37,4 1 7/16

Part Number Product Pack Qty Pack Cat A Hole Diameter B Diameter C Length Drilling diacontents metric imperial metric imperial metric imperial metric imperial

MCXFA1346 Conversion bush – lower link with drilling 5 2 2 – 1 22,4 7/8 28 1 1/8 62 2 7/16 12 15 /32MCXFA1347 Conversion bush – lower link with drilling 5 2 3 – 2 28,7 1 3/16 36,6 1 7/16 64 2 1/2 12 15 /32

Part Number Product Pack Qty Pack Cat A Hole Diameter B Diameter C Lengthcontents metric imperial metric imperial metric imperial

MCXFA1447 Conversion bush – lower link 5 2 1 – 0 16,3 5/8 22 7/8 33 1 5/16MCXFA1450 Conversion bush – lower link 5 2 2 – 1 22,4 7/8 28 1 1/8 43 1 11/16MCXFA1452 Conversion bush – lower link 5 2 3 – 2 28,7 1 3/16 36,6 1 7/16 52 2 1/16

Top and lower linkage balls, quick hitch balls, conversion bushes and spacers (Products available in JDPoint through programme B3)

Used to retain and control lateral movement of tractor lift arms. Includes weld on tabs and anti corrosion finish

Min Length – 500mm Max Length – 720mm


Lower link Spring

Top and lower linkage balls, quick hitch balls, conversion bushes and Spacers

89|

Part Number Product Pack Qty Pack Cat A Hole diameter B Diameter C Ball width D Diameter contents metric imperial metric imperial metric imperial metric imperial

MCXFA1340 Quick hitch ball – lower link with cone 1 1 2 28,7 1 1/8 56 2 3/16 70 2 3/4 140 5 1/2MCXFA1341 Quick hitch ball – lower link with cone 1 1 3 – 2 28,7 1 1/8 64 2 1/2 70 2 3/4 140 5 1/2MCXFA1339 Quick hitch ball – lower link with cone 1 1 3 37,4 1 7/16 64 2 1/2 70 2 3/4 140 5 1/2

Part Number Product Pack Qty Pack contents Cat A Hole diameter B Diameter C Ball width metric imperial metric imperial metric imperial

MCXFA1386 Quick hitch ball – top link 10 1 2 25,7 1 50 1 15/16 50 1 15/16MCXFA1388 Quick hitch ball – top link 10 1 3 -2 25,7 1 60 2 3/8 50 1 15/16MCXFA1387 Quick hitch ball – top link 10 1 3 32 1 1/4 60 2 3/8 50 1 15/16

Part Number Product Pack Qty Pack Cat A Hole diameter B Diameter C Length contents metric imperial metric imperial metric imperial

MCXFA1449 Conversion bush – top link 5 2 2-1 19,3 3/4 25,5 1 51 2 MCXFA1448 Conversion bush – top link 5 2 2-1 19,3 3/4 25,5 1 41 1 5/8MCXFA1451 Conversion bush – top link 5 2 3-2 25,7 1 31,75 1 1/4 51 2

Part Number Product Pack Qty Pack Cat A Hole diameter B Ball Diameter C Ball width contents metric imperial metric imperial metric imperial

MCXFA1385 Quick hitch ball – lower link 10 1 2 28,7 1 1/8 56 2 3/16 45 1 3/4MCXFA1383 Quick hitch ball – lower link 10 1 3 -2 28,7 1 1/8 64 2 1/2 45 1 3/4MCXFA1384 Quick hitch ball – lower link 10 1 3 37,4 1 7/16 64 2 1/2 45 1 3/4MCXFA1334 Quick hitch ball – lower link 1 1 4 -3 37,4 1 7/16 85 3 5/16 57 2 1/4MCXFA1335 Quick hitch ball – lower link 1 1 4 51 2 85 3 5/16 57 2 1/4

Top and lower linkage balls, quick hitch balls, conversion bushes and spacers (Products available in JDPoint through programme B3)

Top and lower linkage balls, quick hitch balls, conversion bushes and spacers

90 |

Part Number Product A (Diameter) B (Length) metric imperial metric imperial

MCXFA1354 Drawbar pin 15 5/8 108 4 1/4MCXFA1356 Drawbar pin 19 3/4 99 3 7/8MCXFA1365 Drawbar pin 19 3/4 137 5 3/8MCXFA1369 Drawbar pin 19 3/4 158 6 1/4MCXFA1355 Drawbar pin 22 7/8 98 3 7/8MCXFA1366 Drawbar pin 22 7/8 137 5 3/8MCXFA1370 Drawbar pin 22 7/8 158 6 1/4MCXFA1364 Drawbar pin 25,4 1 137 5 3/8MCXFA1368 Drawbar pin 25,4 1 157 6 3/16MCXFA1371 Drawbar pin 28 1 1/8 183 7 3/16MCXFA1367 Drawbar pin 32 1 1/4 183 7 3/16MCXFA1362 Drawbar pin 35 1 3/8 185 7 5/16MCXFA1363 Drawbar pin 38 1 1/2 185 7 5/16

Part Number Product A (Diameter) B (Length) C (Length)metric imperial metric imperial metric imperial

MCXFA1358 Drawbar pin – with locking handle 31 1 1/4 250 9 7/8 150 6

Part Number Product A (Diameter) B (Length) C (Length)metric imperial metric imperial metric imperial

MCXFA1357 Drawbar pin – remote locking 31 1 1/4 230 9 150 6MCXFA1359 Drawbar pin – remote locking 31 1 1/4 360 14 1/8 150 6MCXFA1360 Drawbar pin – remote locking 31 1 1/4 500 19 1/2 150 6MCXFA1361 Drawbar pin – remote locking 31 1 1/4 670 26 3/8 150 6

Clevis, locking and remote locking type, drawbar pins (Products available in JDPoint through programme B3)

Clevis, locking and remote locking type, drawbar pins


91|

Bolt on ball hitch pins, towing balls and ball and clevis assemblies (Products available in JDPoint through programme B3)

Bolt on ball hitch pins, towing balls and ball and clevis assemblies


Part Number Product Ball diameter A Length B Length Hole diameter Tow capacitymetric metric imperial metric imperial metric imperial (kg)

MCXFA1372 Towing ball 50 20 1 3/16 90 3 9/16 16.5 5/8 1500

Part Number Product Ball diameter A Length B Diameter C Length D length Thread Tow capacitymetric metric imperial metric imperial metric imperial metric imperial size (kg)

MCXFA1378 Ball hitch pin 50 30 1 3/16 19 3/4 55 2 3/16 12 1/2 3/4" UNF 500MCXFA1379 Ball hitch pin 50 30 1 3/16 22 7/8 55 2 3/16 15 5/8 7/8" UNF 1250MCXFA1377 Ball hitch pin 50 30 1 3/16 25 1 50 2 15 5/8 1" UNF 1250


MCXFA1376 Ball hitch pin 50 20 13/16 22 7/8 137 6 5/8 85 3 3/8 7/8" UNF 1250MCXFA1375 Ball hitch pin 50 20 13/16 25 1 137 6 5/8 85 3 3/8 1" UNF 2000


MCXFA1381 ATV Ball hitch pin 50 20 13/16 16 5/8 35 1 3/8 8 5/16 5/8 UNF 350MCXFA1380 ATV Ball hitch pin 50 20 13/16 19 3/4 32 1 1/4 5 3/16 3/4 UNF 350

92 |

Part Number Product Ball diameter A Length B Length C Length D Length Hole Diameter Tow capacitymetric metric imperial metric imperial metric imperial metric imperial metric imperial (kg)

MCXFA1374 Ball & clevis coupling 50 40 1 9/16 90 3 9/16 55 2 3/16 19 3/4 16.5 5/8 1500

Part Number Product Ball diameter A Length B Length C Length D Length Hole Diameter Tow capacitymetric metric imperial metric imperial metric imperial metric imperial metric imperial (kg)

MCXFA1373 Ball & clevis coupling 50 20 13/16 90 3 9/16 40 1 9/16 19 3/4 16.5 5/8 3500

Bolt on ball hitch pins, towing balls and ball and clevis assemblies (Products available in JDPoint through programme B3)

Bolt on ball hitch pins, towing balls and ball and clevis assemblies


93|

Moisture Testers

Moisture Testers

94 |

GT30300 Non Compaction Grain Tester (Moisture and Test Weight with Carrying Case)

Moisture Testers (Products available in JDPoint through TS programmes B3, A9, A8)

According to agricultural nutrition experts, the single most important factor influencing the quality of grain, hay and silage is moisture. Moisture management is a continuous process that requires measuring tools. Protect your investment by testing moisture content before, during and after the season.

John Deere moisture testers, whether baled hay testers, windrow hay testers, grain or grinding grain testers, operate accurately and quickly, measuring moisture in the field, bin or barn.

Features ■ Direct readout for 20 different grain scales ■ Displays grain test weight (no pre-weighing) ■ Measures moisture fast, easy, and accurately ■ Non-compaction design with LCD display ■ USB compatibility ■ Automatic temperature compensation ■ Supplied with protective carry case ■ Two years warranty

Specifications ■ Moisture range: 6% – 45% depending on grain tested

■ Temperature range: 40° – 113°F (5° – 45°C) ■ Repeatability and accuracy: ±0.3% in normal moisture range for stored grain

■ Display resolution: 0.1% moisture ■ 4 AA batteries required (not included)

Pack Content: 1Pack Qty: 1


Moisture Testers

95|

Grinding Grain Moisture Tester

Moisture Check-Plus Grain Tester

GT5300 Grain moisture tester

Replacement Carrying Case Replacement Cap

Features and Specifications ■ Fast accurate measurements of more than 30 grain scales.

■ Smallest sample needed by any portable tester ■ Automatic average of the last four measurements ■ Individual offset adjustment by crop ■ Illuminated LCD display with 0.1% moisture display resolution

■ Repeatability and accuracy: ± 0.5% in normal moisture range for stored grain below 18% moisture

■ Temperature range: 0° – 50°C (32° – 122°F)

■ 9V battery required (not included) ■ Supplied with a protective carry case ■ Two-year warranty



Features and Specifications ■ Direct readout for 40 different grain scales ■ Built-in calibration button displays the test results average

■ Higher-frequency, capacitive circuit improves accuracy

■ Enhanced temperature compensation circuit ■ Multilingual display – English, Spanish, French, German, Italian, Portuguese and Swedish

■ Protective carrying case with shoulder strap included

■ Illuminated LCD display with 0.1% moisture display resolution

■ Repeatability and accuracy: ± 0.5% in normal moisture range for stored grain

■ Moisture range: 5 – 40% depending on grain tested

■ Temperature range: 0° – 45°C (32° – 113°F) ■ Two 9V batteries required (not included) ■ Two-year warranty



Features and Specifications ■ Larger 2.5” LCD display with selectable large or standard size fonts

■ Automatically averages selectable number of tests ■ Stores average calibration for all grains tested ■ USB port for personalization (adding user name), grain scale, firmware and diagnostic updates

■ Direct readout for 40 different grain scales ■ Backlit push-button interface for low light conditions

■ Low battery indicator and battery saver ■ Illuminated, multilingual display - English, French, German, Italian, Portuguese, Spanish and Swedish

■ Temperature range: 0° - 45° C (32° - 113° F) ■ Moisture range: 5% - 40% depending on grain tested

■ Repeatability and accuracy: ±0.5% in normal moisture range for stored grain

■ Display resolution: 0.1% moisture ■ Two 9V batteries required (not included) ■ Two-year warranty



Carrying Case for Grain Moisture Tester – MCXFA1873Pack Content: 1Pack Qty: 1


Replacement Cap for Grain Moisture Tester – MCXFA1873Pack Content: 1Pack Qty: 1


Grain Moisture Testers (Products available in JDPoint through TS programmes B3, A9, A8)

Grain Moisture Testers

96 |

Handheld, Baled Hay Moisture Tester with Calibration Clip

Windrow Hay Moisture Tester

Handheld, Pistol-grip Hay Moisture Tester with 45 cm (18") probe 45 cm (18") replacement Probe

With 50cm (20") probe Features and Specifications

■ Includes calibration clip – less than 20 seconds to calibrate

■ Above and below moisture limit indication ■ Illuminated LCD display with 0.1% display resolution

■ Accurate throughout the normal range of stored, baled hay

■ Moisture range: 8 – 44% depending on hay tested ■ Temperature range: 0° – 107°C (32° – 225°F) ■ 9V battery required (not included) ■ Two-year warranty



Features and Specifications ■ Only portable hay moisture tester available for use in the field before baling ■ Quickly measures loose hay and forage from a windrow without committing the time and expense of using baling or chopping equipment before the hay is at the correct moisture levels

■ Simple to use – add loose hay to a five-gallon bucket, insert tester probe and press a button

■ Illuminated LCD display with 0.1% display resolution ■ Accurate within 2 – 4% ■ Moisture range: 13 – 70% depending on hay tested ■ 9V battery required (not included) ■ Two-year warranty



Features and Specifications ■ Direct readout for moisture % and temperature (ºF and ºC) ■ Extra-rugged probe shaft made from aircraft aluminium ■ Sturdy pistol-grip handle ■ Illuminated LCD display with 0.1% moisture display resolution ■ Accurate throughout the normal range of stored, baled hay ■ Moisture range: 14.4 – 44% depending on hay tested ■ Temperature range: 0° – 107°C (32° – 225°F) ■ 9V battery required (not included) ■ Two-year warranty



450mm (18") Replacement Probe for Pistol-grip Hay Moisture Tester – MCXFA1872Pack Content: 1Pack Qty: 1


Hay Moisture Testers (Products available in JDPoint through TS programmes B3, A9, A8)

Hay Moisture Testers

97|

Baler Mounted Hay Tester

Baler Sensor Pad Kit (2 Pads with Hardware and 2 x 10.5m Sensor Cables)

Baler Sensor Pad (1 EA) Sensor Cable 10.5m (1 EA)

USB connection cable Power Cable 3m

New multi-sensor technology takes readings on the left, right side and middle of the bale.

Features ■ Advanced multi-sensor technology for greater overall accuracy while baling hay with square or round balers

■ Sturdy display module mounts in tractor cab and displays readings from sensors mounted in baler

■ Averages updated and displayed every 3 seconds ■ Illuminated LCD display and keypad ■ ± Moisture offset adjustments ■ Adjustable high/low limit of moisture reading ■ Upgradable firmware and calibration curves via USB

Specifications ■ Moisture range: 8% – 30+% depending on baler type ■ Accurate throughout the normal range of stored hay ■ Display resolution: 0.1% moisture ■ 2 year waranty

Product Includes: ■ Display module ■ 10’ power cable ■ 2 sensor pads ■ 2 – 35’ sensor cables ■ Mounting hardware ■ USB cable ■ Installation instructions



Can be used as a replace-ment sensor kit for MCXFA1910 or to use as an expansion kit where more than one baler can be used with the existing tractor mounted monitor.Pack Content: 1Pack Qty: 1


Replacement sensor pad for MCXFA1910 Baler Mounted Hay TesterPack Content: 1Pack Qty: 1


Replacement sensor cable for MCXFA1910 Baler Mounted Hay Tester.Pack Content: 1Pack Qty: 1


Replacement USB connection cable for downloading data from MCXFA1910 Baler Mounted Hay Tester.Pack Content: 1Pack Qty: 1


Replacement power cable for MCXFA1910 Baler Mounted Hay Tester.Pack Content: 1Pack Qty: 1


Baler Mounted Hay Moisture Testers (Products available in JDPoint through TS programmes B3, A9, A8)

Baler Mounted Hay Moisture Testers

98 | Tapes

Tapes (Products available in JDPoint through TS programmes B3, A9, A8)

99|Tapes

Tapes – PVC (Products available in JDPoint through TS programmes B3, A9, A8)

Tapes – Electrical Insulation (Products available in JDPoint through TS programmes B3,

A9, A8)

Tapes – PTFE (Products available in JDPoint through TS programmes B3, A9, A8)

PVC tape – Black 100mm x 33m

Insulation tape – Black

PTFE tape

PVC tape – White 100mm x 33m

Insulation tape – Multi pack 3 colours

Black PVC tape, strong multi-purpose tape, ideal for sealing damaged silage bale wrap. 100mm x 33m. Pack contents: 1 Package quantity: 6


Black electrical insulation tape – low voltage, Phase A. IEC 454-3-1, flame retardant to AFERA 4009 T6, roll size 19 mm x 20 m Pack contents: 1Package quantity: 10


White PTFE tape for sealing pipe threads. Resistant to alkalis and acids, non flammable, 12mm wide x 10m. Pack contents: 1 Package quantity: 10


White PVC tape, strong multi-purpose tape, ideal for sealing damaged silage bale wrap. 100mm x 33m. Pack contents: 1 Package quantity: 6


Electrical insulation tape – low voltage, Phase A, multi pack 3 colours Black/red/blue. IEC 454-3-1, flame retardant to AFERA 4009 T6. Roll size 19 mm x 20 mPack contents: 3 Package quantity: 5


100 | Tapes

Packing tapes (Products available in JDPoint through TS programmes B3, A9, A8)

Security tapes (Products available in JDPoint through TS programmes B3, A9, A8)

Tapes – Sealing & Masking (Products available in JDPoint through TS programmes B3, A9, A8)

White tape with two-coloured John Deere logo. Length: 66 m.

Part number: MCV109550001

Yellow barrier tape with green John Deere logo. Ideal for marking out large areas. Length: 100 m.

Part number: MCV109560001

Duct tape – Silver 50mm x 50m

Masking tape 50mm x 50m

Masking tape 25mm x 50m

Duct tape – Black 50mm x 50m

Silver duct tape – water, oil and grease resistant. Ideal for sealing and temporary repairs. 50mm x 50m. Pack contents: 1Package quantity: 6


Masking tape. Suitable for protecting areas when painting. Low tack adhesive for easy repositioning. 50mm x 50m. Pack contents 1 Package quantity 5


Masking tape. Suitable for protecting areas when painting. Low tack adhesive for easy repositioning. 25mm x 50m. Pack contents: 1 Package quantity: 5


Black duct tape – water, oil and grease resistant. Ideal for sealing and temporary repairs. 50mm x 50m. Pack contents: 1 Package quantity: 6


Packing Tape

Security Tape

101|

Hand Cleaners (Products available in JDPoint through TS programmes B3, A9, A8)

Lime beaded hand cleaner with Aloe Vera Pumice hand cleaner with Aloe Vera

Pump and lid for 4.5 ltr jars

Lime beaded hand cleaner with Aloe Vera 1 ltr.

Pack contents 1 Package quantity 24


Pumice hand cleaner with Aloe Vera – 1 ltr



Based on natural citrus extracts, this beaded, semi-gel skin cleanser rapidly and effectively removes heavy soiling from oil, grease, paint, dirt and grime without exposing the user to harsh petroleum based products. This cleaner contains Aloe Vera as a natural antiseptic and has an emollient to condition and moisturise the skin. It's citrus lime content assists cleaning and leaves a pleasant residual citrus smell after washing. This cleaner works effectively with hot or cold water and is designed for conditions where regular cleaning of hands is essential. (Should not be used on face or sensitive skin and areas of broken or sore skin should be avoided)

This premium hand cleaning paste is solvent free, beaded and specially formulated to deep clean and remove stubborn heavy soiling from oil, grease, paint, glue, inks and general dirt and grime. The pumice content assists deep cleansing, an emollient leaves a soft feel to the skin and the Aloe Vera acts as a natural antiseptic. The soft paste consistency allows easy massage into the skin and rinses away to leave a pleasant citrus fragrance. Designed for conditions where regular cleaning of hands is essential. (Should not be used on face or sensitive skin and areas of broken or sore skin should be avoided)

A metal pump and screw top lid for easy and controlled dispensing of hand cleaner. A dispensing pump can help to reduce the risk of cross infection of users.

Only suitable for use with the 4.5 litre containers.


Lime beaded hand cleaner with Aloe Vera 4.5 ltr.



Pumice hand cleaner with Aloe Vera – 4.5 ltr



Hand Cleaners

High quality hand cleaners specifically formulated to remove heavy soiling and ingress dirt from skin.

102 |

Wheel spinner, black with 1968 logo

Wheel spinner, green with yellow logo

Deluxe wheel spinner with green logo

Wheel spinner adapter kit

Wheel spinner, green with vintage 1950 logo

Wheel spinner, black with yellow logo

Deluxe wheel spinner with black logo





A selection of John Deere wheel spinners with the choice of colour and logo to suit your vehicle or preference. Each is manufactured with a heavy duty, aluminium body construction for durability and a non slip, comfort grip handle for safe and secure use. Each wheel spinner comes with two brackets and a rubber adapter for mounting on either regular or deep spoke wheels.

These stylish deluxe wheel spinners fit securely to all steering wheels with a thickness of up to 31.7mm (1¼ inch). They are recommended for lawn and garden machinery, as well as tractors and other larger vehicles. Each has a high quality and smooth spinning movement and a permanent John Deere logo. The split base design enables quick and easy mounting and the ribbed, soft grip handle ensures comfortable, safe and secure use at all times. Supplied with fixing bolts, allen key and rubber spacer for smaller steering wheels.



The wheel spinner adapter kit allows proper mounting of a wheel spinner in an upright position on to smaller steering wheel, typically found on lawn and garden equipment. Kit contents 2 x plastic mounting brackets, 2 x bolts, 2 x nuts and 2 x washers.









Wheel Spinner

Wheel Spinners (Products available in JDPoint through TS programmes B3, A9, A8)

103|Wiper Blades

50 piece dealer Wiper blade kit with sizes ranging from 305mm to 610mm (12" – 24") 5 pieces of each size. Includes compact point of sale merchandiser for easy and effective in-shop display.


Wiper Blades (Products available in JDPoint through TS programmes B3, A9, A8)

A range of quality wiper blades from 305mm – 610mm (12" – 24"). Molded from 100% natural rubber to produce low noise and judder free wiping. The full metal structure is suitable for many applications using the included multi-fit adaptors.

Part Number Product Pack Quantity Pack Content LengthMCXFA1750 Wiper blade 4 1 305mm (12") MCXFA1751 Wiper blade 4 1 350mm (14")MCXFA1752 Wiper blade 4 1 380mm (15")MCXFA1753 Wiper blade 4 1 410mm (16")MCXFA1754 Wiper blade 4 1 460mm (18")MCXFA1755 Wiper blade 4 1 480mm (19")MCXFA1756 Wiper blade 4 1 510mm (20")MCXFA1757 Wiper blade 4 1 530mm (21")MCXFA1758 Wiper blade 4 1 560mm (22")MCXFA1759 Wiper blade 4 1 610mm (24")

Wiper blade dispenser kit 50pcs

104 |

Seat Covers / Floor mats

Seat Covers / Floor mats

105|Seat Covers

Seat Covers (Products available in JDPoint through TS programmes B3, A9, A8)

Easy care leatherette cover

■ high quality leatherette cloth ■ tear proof material for long-life ■ 10 mm foam centre layer ■ easily wipes clean with water

Enjoy the comfort of heated seat cover in the winter

■ high quality reinforced cloth ■ tear proof material for long-life ■ material treated with dirt repellant ■ 10 mm foam centre layer ■ machine washable up to 30° C

■ heated panels

Made to measure seat cover for long-lasting protection of your seat

■ high quality reinforced cloth ■ tear proof material for long-life ■ material treated with dirt repellant ■ 10 mm foam centre layer ■ machine washable up to 30° C

Yellow leatherette seat covers keep your seat in a good condition after frost and rain

■ high quality leatherette cloth ■ tear proof material for long-life ■ easy wipes clean with water

Universal seat cover – for occasional protection

■ Easy and quick fitting ■ Embossed with a John Deere logo ■ Tear proof material for long-life

A range of tailor-made seat covers, with John Deere logo, for long-lasting protection of your seat.

106 | Seat Covers


Turf Machinery

Machine Seat type Seat part number Seat remarksFabric seat cover

part numberLeatherette seat

cover part number*

Gator:HPXXUVTurf2020 series1R series2R series3036E seriesX700 seriesX950R

AM142094 Plastic seat MCJHD3367

Compact utility tractor (cab):1000 series3020 series4010 series4020 series

MCJHD3367T

Compact utility tractor (open station):3020 series4010 series4020 series Plastic seat MCJHD4987S

Front mower:1515 Series 21565– 1545 1420 – 1435– 1445 AL179257

AL179255Plastic seat MCJHD4300SJ

* Yellow seat covers are available for yellow seats, brown seat covers are available for fabric seats

107|Seat Covers


Tractors 5000, 5010, 5010N & SN, 5015 F&V or 5G-series, including open station

Tractors 40/50-series and 31X0-34X0

Machine Seat type Fabric seat cover part number

840–3640950–36503100-34003110–3410 MCJHD2079



cover part number*

5000 N & SN5010 N & SN5015 F & V5GF & GV ER201705

ER201703Fabric seat MCJHD3647

5000 series5010 series5015 series & HC 5G series & GH

ER201708 Plastic seat MCJHD3449S


ER201707 Fabric seat MCJHD3449


108 | Seat Covers


Tractors 5000, 5010, 5010N & SN, 5015 F&V or 5G-series, including open station



cover part number*


ER201702 MCJHD2676

5000 series5010 series 5015 series & HC5G series & GH ER196712

ER196862MCJHD2080

5015 series< 02/2006

MCJHD2505

5000 series N & SN5010 series N & SN5015 series F & V5GF & GV

ER201706 Plastic seat MCJHD3647S


109|Seat Covers



part numberLeatherette seat cover

part number*

6000 series6010 series

MCJHD1110

5020 series MCJHD2885

5020 series 5R series

AL201825 MCJHD1730 MCJHD4270S

5020 series 5M series 5R series 6000 series & SE6010 series & SE6020 series & SE6030 series + Premium 6M series6R series7030 Premium (E)(= 7430 + 7530)

AL201829AL175599AL179254AL179256

Without head rest MCJHD4300 MCJHD4300S

5020 series (prior to 2007)6000 series & SE6010 series & SE6020 series & SE6030 series + Premium7030 Premium (E)(=7430 + 7530)

AL175597 With 3” cushion and adjustable

cushion depth and inclination

MCJHD1729

MCJHD1729CH (with heating panels)

MCJHD4245S

Tractors 5020, 5M, 5R, 6000-6030 and 74/7530 Premium, 6M, 6R, including open station


110 | Seat Covers



part numberLeatherette seat cover

part number*

6M series6R series

BL15038 BL15039

With 4” cushion and adjustable

cushion depth and inclination

MCJHD4402 MCJHD4402S

5E series5M series OOS6000 series6010 series6020 series6030 series6M series

AL179257 AL179255

Plastic seat without head rest

MCJHD4300SJ

Tractors 5020, 5M, 5R, 6000-6030 and 74/7530 Premium, 6M, 6R, including open station


111|

Tractors 4040, 4050, 7000-9000 all series, 7R, 8R, 9R

Seat Covers


Machine Seat type Seat part numberFabric seat cover part

numberLeatherette seat cover

part number*

7000 series7010 series4040 series4050 series

TY16163 MCJHD1962

7020 series7030 series

RE195850 MCJHD5526

7020 series7030 series (except 7030 Premium)8010 series8020 series (T)8030 series (T)9020 series (T)9030 series (T)9000 series

RE267624 RE289301 RE183943 RE183942

MCJHD2677

MCJHD2677CH (with heating panels)

MCJHD2677S

8010 series RE183942 MCJHD2081

7R series8R series8RT series9R series9RT series

RE319217 RE319218

MCJHD5073

MCJHD5073CH(with heating panels)

MCJHD5073S


112 |

Harvesting Machinery

Machine Seat type Seat part number Fabric seat cover part number

SPFH:5720, 58205730, 5830

TY16163 MCJHD1962

Combine:Z 2000 series Z 2200 series1450– 1550 1470 – 1570

MCJHD1110

Combine:2200 seriesSPFH:6010 series6050 series

MCJHD2885

Combine:9780CTS series <2002

MCJHD2081

Combine:9880 STS series9780 CTS series9000 WTS seriesW series, C series, S series, T seriesSPFH:7000 series7050 series

AH227975AH228257AH228255

MCJHD2886

Seat Covers


113|

Telehandlers

Machine Seat type Seat part number Seat remarksFabric seat cover part


part number*

3200 – 3400 3015– 3020


3200 – 34003015 – 30104400 – 4500

AL201829AL175599 AL179254 AL179256

Without head rest MCJHD4300 MCJHD4300S

3200-34003015– 30203800

AL175597 With 3" cushion and

adjustable cushion depth and inclination

MCJHD1729

MCJHD1729CH(with heating panels)

MCJHD4245S

Seat Covers



114 |

Universal Seat covers

Models Picture Seat cover part number Remark

All harvesting machinery

MCJHD2900 Universal cover

All tractors

MCJHD2901 Universal cover

Self-Propelled Sprayers

Machine Seat type Seat cover part number

Self-propelled sprayer:

5430iMCJHD2874

Seat Covers


115|

Instructor/Passenger seats Tractors

Seat Covers


Models Picture Seat cover part numberFabric seat cover part


part number

Instructor seat Tractor 6R series


Instructor seat 5020, 5R, 5M, 5RN6000 series & SE, 6010 series & SE6020 series & SE, 6030 series + Premium 6M series, 6MC, 6RC, 6D7030 Premium (E) (= 7430 + 7530)

AL173569AL173570LG102452


7020, 7030 series8000 (T), 8010 (T) series8020 (T), 8030 (T) series9000 (T), 9020 (T), 9030 (T) series

RE192707RE195932


7R, 8R, 8RT RE294975RE298456


Models Picture Seat cover part numberFabric seat cover part


part number

Combine:W series, S series, T series

MCJHD6249

Self-propelled sprayer:5430i

AL173569AL173570LG102452


Instructor/Passenger seats Harvesting Machinery & Self-Propelled Sprayers

116 |

Floor mats (Products available in JDPoint through TS programmes B3, A9, A8)

Floor mats reduce noise and protect the floorboard.

■ Made to measure for each John Deere cab type ■ Respect of all cab features (pedals, handles …) ■ Easy to clean ■ High pressure washer resistant (cold water) ■ Material: Black rubber or beige needle punch carpet ■ With John Deere logo

Series Standard floor mat Rubber floor mat5M series, 5R series MCTJHD5114 MCTJHD5114C5015 MCTJHD3764 MCTJHD3764C5020 MCTJHD3721 MCTJHD3721C6M, 6000, 6010, 6020, 6030, 6030 and 7030 PREMIUM MCTJHD6000 MCTJHD6000C6R MCTJHD5561 MCTJHD5561C7000, 7010 MCTJHD29067020 MCTJHD3283 MCTJHD3283C7030 (7030 PREMIUM excl.) MCTJHD4055 MCTJHD4055C8000, 8010 MCTJHD36668020 MCTJHD3661 MCTJHD3661C8030 MCTJHD4130 MCTJHD4130C7R, 8R MCTJHD5072 MCTJHD5072C

Series Standard floor mat Rubber floor mat7050 series MCTJHD5133 MCTJHD5133C

Part Number - Recycled cardboard- Contains up to 10 floormats- Can be moved with a forklift

MCJHDDISPLAY

Self Propelled Forage Harvester floor mats

Floor mats Display (Product available in JDPoint through TS programme PC/AY/AU)

Tractor floor mats

Floor mats

Available until stock last

117|

Protection kit (Products available in JDPoint through TS programmes B3, A9, A8)

Kit made of 3 pieces:

■ seat protection ■ steering wheel protection ■ floor protection

Use it to return a clean tractor to your customers after a service Workshop usage: can be used multiple times.

Protection Kit – MCJHDPROTECT

Seat protection / Wheel protection:

■ Protection for seating – back rest – head rest and steering wheel ■ Black fluid material ■ Universal size ■ Washable in machine ■ Quick and easy fitting

Protects the cab from:

■ spots on the seat ■ grease on the steering wheel ■ footsteps on the floor

Floor protection:

■ Made of leatherette material ■ Universal size ■ Washable with sponge ■ Quick and easy fitting

Part number: MCJHDPROTECT

Protection kit

118 | Portable lighting / Torches

Portable lighting / Torches (Products available in JDPoint through TS programmes B3, A9, A8)

119|Portable lighting / Torches


LED head torch

Compact LED torch

LED torch

LED Key ring torch

LED combination pack

Manufactured from ABS plastic for use in extreme conditions, this lightweight LED head torch is suitable for use in many leisure and work applications.

• Bulb type: CREE XPC LED• 80 lumens• 30m effective beam• 10000 hours minimum LED burn time• 3PCS AAA battery included • Impact and water Resistant• Polycarbonate Lens• High/low/ function• Tiltable lamp body• Adjustable 3 strap head band Packaged in counter top merchandiser Package quantity: 6


Machined high quality aluminium LED Compact torch with corrosion protection

• 6061-T6 Machined Aluminum housing• CREE XPE LED • 150 lumen• 100m effective beam• 10000 hours minimum LED burn time• 3pc AAA alkaline batteries included• High/low/strobe function • Palm sized• Impact and water Resistant• Polycarbonate Lens• Convenient wrist strap Packaged in counter top merchandiser Package quantity: 6


Machined high quality aluminium LED key ring torch with corrosion protection

• 6061-T6 Machined Aluminum housing• 5mm LED • 8 lumen• 15m effective beam• 10000 hours minimum LED burn time• 1x AAA alkaline battery included• Impact and water Resistant• Polycarbonate Lens• Key chain includedPackaged in counter top merchandiser Package quantity: 12


Combining the qualities of both MCXFA1803 and MCXFA1800 this dual pack offers a functional, convenient and portable lighting solution

• Impact and water Resistant• 10000 hours minimum LED burn time• Polycarbonate Lens• AAA batteries included. Packaged in counter top merchandiser Package quantity: 6


Machined high quality aluminium LED Slimline torch with corrosion protection

• 6061-T6 Machined Aluminum housing• CREE XPG LED • 200 lumen• 200m effective beam• 10000 hours minimum LED burn time• 3pc C alkaline batteries included• Impact and water ResistantPolycarbonate Lens.Package quantity: 4


120 |


Rechargeable LED Inspection light

Featuring ■ 26 super bright LEDs; 21 as an inspection lamp or 5 used as a directional torch. ■ Single LED battery indicator. ■ Two 360° swivel hanging hooks for hands-free applications allowing unit to be used horizontally or vertically.

■ Three rubber covered magnets, two magnets on the rear for horizontal use and one on the handle end for vertical use.

■ Bottom quarter of the lamp rotates 180° allowing the unit to be positioned for ease of use on any ferrous surface.

■ Shatterproof polycarbonate lens with a highly polished reflector board gives an increased spread of light.

■ Lithium-ion polymer battery (3.7V 1500mAh) for longer life. Can operate for up to four hours on a single charge.

■ Anti-slip and soft grip exterior. ■ Supplied with mains and in-car 12V chargers.



Portable lighting / Torches

121|Knives

Knives (Products available in JDPoint through TS programmes B3, A9, A8)

Marine Knife

Multi-functional Knife

Rescue Knife

Three functions: knife, belt cutter and window breaker. Stainless steel half serrated blade with locking system. One-hand opening and closing. Logo engraved on the handle.

Package quantity: 12

Part number: MCJ099571000

Made of 2CR13 Stainless steel. Aluminum handle with rubberized finish. Functions available: knife with locking system, bottle opener, scissors, can opener, 2 and 5 mm flat head screwdriver, corkscrew, point for making holes and an attaching ring. Blade length: 7 cm.


Half serrated stainless steel blade. Half thin edged blade for precision cutting. One hand opening and closing. Locking system. Stainless steel handle covered by a rubber coating. Belt clip. Logo engraved on the blade.



122 | Ruler

Ruler (Products available in JDPoint through TS programmes B3, A9, A8)

Folding Ruler

10 fold, full rivet ruler. Digital imprint on one side. Length: 2 m.Package quantity: 10


123|

Personal Protection Equipment (Products available in JDPoint through TS programmes B3, A9, A8)

Personal Protection Equipment

124 |

Eye Protection (Products available in JDPoint through TS programmes B3, A9, A8)

Eye Protection

JD207-S Smoked Lens Safety Glasses


JD207-BM Blue Mirror Safety Glasses

JD209-C Clear lens safety Glasses

Features

- Contemporary lightweight frame design - Impact resistant polycarbonate - UV 400 protection - Smoke tinted, anti-scratch lens- Non slip, softgrip temples- Detachable neck cord (adjustable)- Microfibre drawstring bag (suitable for lens cleaning)- Complies with EN166 EN170 CE ANSI Z87+

Package quantity: 4


Features

- Contemporary wraparound frame design - Impact resistant polycarbonate - UV 400 protection - Smoke tinted, anti-scratch lens- Non slip, softgrip temples and nose piece- Detachable neck cord (adjustable)- Microfibre drawstring bag (suitable for lens cleaning)- Complies with EN166 EN170 CE ANSI Z87+

Package quantity: 4


Features

- Contemporary lightweight frame design - Impact resistant polycarbonate - UV 400 protection - Blue mirrored, anti-scratch lens- Non slip, softgrip temples- Detachable neck cord (adjustable)- Microfibre drawstring bag (suitable for lens cleaning)- Complies with EN166 EN170 CE ANSI Z87+

Package quantity: 4


Features

- Contemporary frameless design - Impact resistant polycarbonate - UV 400 protection - clear, anti-scratch lens- Non slip, softgrip temples and nose piece- Detachable neck cord (adjustable)- Microfibre drawstring bag (suitable for lens cleaning)- Complies with EN166 EN170 CE ANSI Z87+

Package quantity: 4


The John Deere safety glasses range has been developed with the user in mind. These glasses offer excellent protection in many situations where eye protection is paramount, such as workshop fabrication, field repairs or general maintenance, and against bright sunlight. There is a style to suit individual preferences and the range features:- multiple frame styles, impact resistance, anti-scratch lenses, *UV 400 protection *lens colour options.*Supplied with adjustable neck cord and microfibre drawstring bag for protection when not in use and can be used to clean lens. (*not JD210 range)

125|

Eye Protection (Products available in JDPoint through TS programmes B3, A9, A8)

Eye Protection

Safety glasses point of sale display

Branded counter top display to effectively merchandise a range of safety glasses Safety glasses not included



JD210-ENG Engineers type safety glasses

JD209-SM Silver Mirror Safety Glasses

JD210-G Safety Goggles

Features

- Contemporary frameless design - Impact resistant polycarbonate - UV 400 protection - Smoke tinted, anti-scratch lens- Non slip, softgrip temples and nose piece- Detachable neck cord (adjustable)- Microfibre drawstring bag (suitable for lens cleaning)- Complies with EN166 EN170 CE ANSI Z87+

Package quantity: 4


Features

- Classic design offering full protection- Impact resistant polycarbonate - Vented side shields to prevent lens fogging- Clear anti-scratch lens- Can be worn over prescription spectacles- Complies with EN166 EN170 CE ANSI Z87+

Package quantity: 4


Features

- Contemporary frameless design - Impact resistant polycarbonate - UV 400 protection - Silver mirrored, anti-scratch lens- Non slip, softgrip temples and nose piece- Detachable neck cord (adjustable)- Microfibre drawstring bag (suitable for lens cleaning)- Complies with EN166 EN170 CE ANSI Z87+

Package quantity: 4


Features

- Lightweight and flexible vinyl frame- Impact resistant polycarbonate lens- Vented bridge for heat dissipation and prevention of fogging- Can be worn over prescription spectacles- Clear, anti-scratch lens- Provides excellent protection whilst chipping, grinding and cutting - Complies with EN166 EN166 N CE ANSI Z87+BBS 1 F CE, BBS 1 S N CE

Package quantity: 4


126 |

Safety Vest & Safety Set (Products available in JDPoint through TS programmes B3, A9, A8)

Safety Vest

Safety Set

A sensible precaution for any pedestrian close to traffic or working machines. Useful to have in your car in case of a breakdown. A lightweight yellow jacket with reflective stripes. John Deere logo is screen printed on the left chest. The jacket comes in a bag. Certified EN471 and CE. One size fits all.


CE certified safety set with hazard warning triangle, Gloves, yellow safety vest with reflective stripes. The logo John Deere is printed in silver on the left chest.


Safety Vest & Safety Set

127|

Camo Waterproof Gloves

Polyamide Knitted and Nitrile Gloves

Kevlar Knitted Gloves

Nylon Knitted and PVC Gloves

Leather & Canvas Handling Gloves

Waterproof breathable inner membrane keeps hands dry. ‘Break Up’ cammo pattern from Mossy Oak®. Insulated SPORTWOOL™ lining for exceptional warmth, blending Merino wool and micro fleece. Anti-bacterial, odour-resistant lining. Breathable synthetic leather palm and reinforced fingers. SPORTWOOL™ is a trademark of The Woolmark Company. Material: Outer Shell: 60% synthetic, 30% stretch nylon, 10% terry. Membrane: 100% polyurethane. Inner liner: 60% polyester, 34% wool. Machine wash, air dry.

Size Part numberM MCJ099838000 L MCJ099839000XL MCJ099840000

Comfortable and non slip gloves with elastic wrist. Good flexibility and resistance to tear. Main application fields: Handling of sliding and oily products, assembly and engineering. Material: 100% knit polyamide, 3/4 coated black nitril on palm and fingers.

Size Part numberL MCJ099903002XL MCJ099903003

Kevlar fibre offers protection from cuts and heat. Seamless knitted contruction. Lightweight 10-gauge knit for comfort.

Size Part numberM MCJ099852000L MCJ099853000XL MCJ099854000

Breathable and hydro-repellent gloves. Good stickiness and protection against cold. Main application fields : building trade, handling in cold places, handling of slippery objects. Elastic cuff. Material: Knitted nylon, PVC coated (palm and fingers).

Size Part numberL MCJ099902002XL MCJ099902003

Solid and comfortable gloves. Security cuff. Main application fields: heavy tasks, woodwork, transport and warehouse handling. Material: cotton, leather.

Size Part numberXL MCJ099900003

Gloves (Products available in JDPoint through TS programmes B3, A9, A8)

Gloves

128 |

EN-345 S1-P safety shoes with breathable mesh inner and upper lining and scuff cap for high comfort and durability. Reflective piping at the heel. Cambrelle® lining and ergonomic footbed. Lightweight rubber outer sole with phylon midsole for good damping properties. Padded tongue with John Deere woven label. 41 MCS620113541 42 MCS620113542 43 MCS620113543 44 MCS620113544 45 MCS620113545 46 MCS620113546

EN 345/S1-P safety shoes. A classic safety shoe with aluminium toecap and a non-metallic anti-penetration sole. Utilizing modern technology with uppers of microfibre mesh reflective elements and black rubber toe. Loose PU footbed with Cambrelle®. Rubber outer sole with phylon midsole. Colour: Silver grey/black. 41 MCS620113341 42 MCS620113342 43 MCS620113343 44 MCS620113344 45 MCS620113345 46 MCS620113346

Safety Shoe Star Work Shoes “Silver Shadow“

Safety shoes (Products available in JDPoint through TS programmes B3, A9, A8)

Safety shoes

The EN 345 classes:SB Safety toecap

S1 As SB standard, plus closed seat region and Anti-static properties, energy absorption of seat region

S1P As S1 standard, plus penetration resistance

S2 S1 standard, plus water-penetration and absorption resistance

S3 As S2 standard, plus penetration resistance and cleated outsole

EN ISO 20345:2007 standardprotective toe cap

Optional footbed with gelheel cushioning insert - Shock impact absorption,long lasting

Medium hardness, phylon, extreme shockabsorption and comfort.Lightweight

“ERP” - Extreme RubberProtection design

Sole construction safety shoes

ENISO 20345:2007Anti penetration midsolewith 1,100 Newtonsprotection (optional)

Energy absorbtionsystem

Arch stabiliserproviding additionalsupport

300 °C heat resistant nitrilerubber. High abrasion.Excellent grip and flexing.Durable

129|Safety shoes

EN 345 SB, Steel toecap, Antistatic properties, Hi-Tec PVC and mesh upper, PU removable footbed, Cambrelle ® lining, Phylon/Rubber outer sole. John Deere rubber patch logo. 40 MCS620113240 41 MCS620113241 42 MCS620113242 43 MCS620113243 44 MCS620113244 45 MCS620113245 46 MCS620113246

EN 345 S1 incl. aluminium toecap and antistatic features. Waxy nubuck and taidura fabric with reflective details on upper. Rubber front toe and back for extra durability. Superlite ergonomic footbed. Rubber outer sole with light phylon mid sole. 41 MCS620113441 42 MCS620113442 43 MCS620113443 44 MCS620113444 45 MCS620113445 46 MCS620113446

Safety Shoes Spike

Safety Boots Workhorse

Safety Shoes Blitz

Safety Boots Mill

Safety shoes (Products available in JDPoint through TS programmes B3, A9, A8)

EN 345/S3 safety boots. Workhorse is for working professionals who need the best in comfort and protection at work. These boots are constructed for durability and long lasting resistance. Antistatic properties, slip and oil resistant outer sole, shock absorption in heel, 200 Joule composite toe cap, PS5 antipenetration midsole. John Deere logo in the leather. Colour: black. 38 MCS630105038 39 MCS630105039 40 MCS630105040 41 MCS630105041 42 MCS630105042 43 MCS630105043 44 MCS630105044 45 MCS630105045 46 MCS630105046

EN 345 SB, Composite toecap, Full grain leather, Taidura, Suede and Nappa upper, PU removable footbed, PU/Rubber outer sole. John Deere rubber patch logo. 41 MCS640145041 42 MCS640145042 43 MCS640145043 44 MCS640145044 45 MCS640145045 46 MCS640145046

130 | Measuring Devices

Measuring Devices (Products available in JDPoint through TS programmes B3, A9, A8)

131|

Portable air compressor kit (Products available in JDPoint through TS programmes B3, A9, A8)

Portable air compressor kit – 12V

High quality 12V portable air compressor kit ■ Pressure gauge in psi, kg/cm,bar ■ Flexible hose with quick release inflator/deflator and large gradient pressure gauge ■ Anti-vibration rubber mounted feet ■ Voltage – 12v ■ Max amperage – 23amp ■ Wattage – 280w ■ Max pressure – 150psi ■ Power cable – 2 .4m ■ Air line length – 7m ■ Supplied with selection of inflation valves ■ Durable storage bag with carry handle for compressor and accessories ■ 1 year warranty



Portable air compressor kit

132 | Tyre Pressure Gauge

Digital Tyre Pressure Gauge – dual powered

Supplied in a counter top display containing 6 individually blister packaged tyre pressure gauges. PSI,bar,kPa and kg/cm² can all be accurately measured (2 to 150PSI ± 1; 0,14 to 10,37 bar, ± 0,07 bar) Integral tyre depth gauge. Dual powered with solar panel and 3V CR2032 lithium ion batteries. Autopower-off function maximises battery life. Package quantity: 6


Tyre Pressure Gauge (Products available in JDPoint through TS programmes B3, A9, A8)

LawntractorsIncorrect tyre pressures of the back wheels will lead to an uneven height of cut and an untidy finish on your lawn. Make sure tyre pressures are correct according to the information in the operator’s manual of your lawntractor.AgricultureSetting the correct tyre pressure for the job is vital to ensure best fuel economy and minimal soil compaction. Correct tyre pressure will also help to avoid overloading the tyre walls when carrying a heavy load and for transport. Check with your tyre manufacturer for specific recommendations.

Suggestions for use

133|Combine setting tools

Combine setting tools (Products available in JDPoint through TS programmes B3, A9, A8)

Sieve setting tool Easy check tool

Simple but effective device for checking and setting the gap in combine sieves. Robust plastic with incremental steps. Useful when harvesting multiple grain types.

Package quantity: 5


Die cast Key ring style branded multi use tool. Specifically designed for measuring the wear on combine crop fingers, but can also be used as a screwdriver and bottle opener.

Package quantity: 5


134 | Battery hydrometer

Battery hydrometer (Products available in JDPoint through TS programmes B3, A9, A8)

Battery hydrometer

Pipette type, easy to use battery cell hydrometer. Can be easily dismantled for cleaning. Packaged in blister with simple operator instructions on reverse.Package quantity: 3


135|Coolant / Antifreeze Tester

Coolant / Antifreeze Tester (Products available in JDPoint through TS programmes B3, A9, A8)

Coolant / antifreeze tester

Easy to use antifreeze tester for measuring the protection level of your vehicle‘s coolant. Packaged in blister with simple operator instructions on reverse.Package quantity: 3


136 | Radios

Radios (Products available in JDPoint through TS programmes B3, A9, A8)

Specially developed for use in utility vehicles, ride on mowers and cabless tractors, this mobile entertainment unit boasts a high specification with many functions and features.

Features and Specifications:

- IP 68 rated radio body - IP 66 rated radio front fascia- AM/FM tuner, including AF frequency tracking - A2DP Bluetooth streaming/mp3- USB rear input- RCA and 3.5 mm AUX inputs - ISO connectivity - Innovative design – ‘encompassing a ‘simple, clean fascia layout’ - Large, rubber, tactile control buttons - Illuminated LCD display with 12/24 hr clock- 4 x 50 watt amplifier


2 years warranty

Waterproof Utility Radio, Bluetooth, USB, Aux

Waterproof Utility Radio Kit

Enjoy your music whatever the weather. This waterproof* utility radio kit has multiple functionality and has been specially developed for vehicles which can be exposed to the elements, such as gators, ride on mowers and cabless tractors. The AM/FM radio unit has innovative design, multi-device connectivity inlcuding Bluetooth streaming, USB and 3.5mm Jack Aux inputs. Multiple mounting options and easy to use functions make it extremely universal.

Conveniently packaged in one box with all you need for a mobile, weatherproof, quality music system in utility and cabless vehicles.

Kit Contents:

1 x Waterproof radio (*IP68 rated radio body and IP66 front fascia)1 x Pair of water resistant speakers1 x Unique multi-position mounting pod 1 x Flexible rubber antenna1 x ISO wiring loom connection1 x User manual, templates and installation instructions


2 years warranty

137|

Specially developed for outdoor use, this pair of speakers are a must when installing MCXFA1888 Waterproof Utility Radio

Contents: 2 speakers with prepared connection wires and mounting brackets

Specifications:

- 3" Speaker enclosures - Water resistant - 40 watts RMS 80 watts peak- 4 Ohm Impedance - Frequency range 70 Hz to 14 KHz

Part number MCXFA18892 years warranty

Designed and developed for the universal mounting of MCXFA1888 Waterproof Utility Radio, this unique pod provides a robust solution for multi-position mounting.

Features

- ABS impact resistant casing with stainless steel screws- Adjustable steel mounting bracket- Integral ventilation and moisture drain - Multi-positional radio surface mount; 90˚ increments- Stainless steel fixing kit- Installation instructions


2 years warranty

Water Resistant Speakers (2)

Mounting Pod


Radios

138 | Radios


The Latest Compact Disc and Digital Media Receiver models designed for agricultural and industrial machinery use, featuringInnovative Design:Modern styling to enhance in-cab presentation and design ergonomics with larger operating buttons to increase the ease of use when off road.Optimised Tuner Performance:Enhanced antenna connection and latest integral componentry has be used to ensure optimum reception.Improved Device ConnectivityWith the latest software updates for A2DP Bluetooth functionality, these radios have increased connectivity with more devices.Ingress Protection:A high level of dust protection to vulnerable areas has been achieved through the use of concealed USB and SD card connection points. Security: Prevent theft temptation with the latest removable front panel and storage casePermanent Memory (flash):Save your favorite preselected radio stations even when the battery is disconected.Illuminated Display: All models incorporate an illuminated all angle display which allows clear day or night time visibility of the screen from most positions in the cab.

139|

Radio USB, SD, Aux Radio Bluetooth, USB, SD, Aux

Features & Benefits

Illuminated all angle display Visibility from most angles and light conditions.

Removable Front Panel with Protective Case Permits the removal and safe storage of the radio front panel for added security

AM/FM Tuner with Radio Data System (RDS) FM frequencies benefitting from Regional mode, traffic announcement, alternative frequencies and Program type

Aux Input (3.5mm) Allows you to plug in an auxillary music source such as an MP3 player/Ipod or SAat Nav from the front of the radio

USB port with sliding cover protection Gives you access to music files stored on a USB memory stick.

SD card slot located behind front panel Gives you access to music files stored on a SD card

2-Channel preamp out (rear) Provides 2 outputs to plug in additional speakers via and aftermarket amplifier

Permanent memory (flash) Retains radio station and preset functions when the power is disconected

Technical Specifications

- Power supply - 12Vdc- Input Fuse - 10A- Max output power - 4 x 40 Watts- Speaker impedance - 4-8 Ohms - Line out - 1.5Vdc max- FM tuner range - 87.5 - 108 MHz- AM tuner range - 522 - 1620 KHz


2 years warranty

Features & Benefits



Bluetooth Hands Free Allows you to make and receive mobile phone calls wirelessly whilst driving

A2DP Wireless Music Streaming Plays music wirelessly from a bluetooth enabled device such as a mobile phone or ipod/Pad








- Power supply - 12Vdc- Input Fuse - 10A- Max output power - 4 x 40 Watts - Speaker impedance - 4-8 Ohms - Line out - 1.5Vdc max- FM tuner range - 87.5 - 108 MHz- AM tuner range - 522 - 1620 KHz


2 years warranty


Radios

140 | Radios

CD Radio, USB, SD, Aux CD Radio Bluetooth, USB, SD, Aux

Features & Benefits



CD-R/CD-RWMP3/WWA Playback Radio can playCD's burned using recordable discs from a computer.










2 years warranty

Features & Benefits



Bluetooth Hands Free Allows you to make and receive mobile phone calls wirelessly whilst driving

A2DP Wireless Music Streaming Plays music wirelessly from a bluetooth enabled device such as a mobile phone or ipod/Pad

CD-R/CD-RWMP3/WWA Playback Radio can playCD's burned using recordable discs from a computer.










2 years warranty


141|

Radios – Audio Accessories (Products available in JDPoint through TS programmes B3, A9, A8)

Radios

100mm dual cone Speakers 130mm dual cone speakers

120mm twin cone speakers (slim fit) Black rubber audio aerial

Metal spring audio antenna Dipole antenna

Aerial extension cable USB and 3.5mm Jack to iPod connection cable

■ Polypropylene cone ■ 70 Watt (max) ■ Frequency range: 90-18000 Hz ■ Impedance 4 Ohms ■ Sensitivity 89 dB ■ Mounting depth 42mm ■ 3m dual wire connecting cable with terminals ■ Powder coated aluminium removable grilles ■ 4 easy mounting points, screws included



■ Polypropylene cone ■ 80 Watt (max) ■ Frequency range: 80-18000 Hz ■ Impedance 4 Ohms ■ Sensitivity 89 dB ■ Mounting depth 44mm ■ 3m dual wire connecting cable with terminals ■ Powder coated aluminium removable grilles ■ 4 easy mounting points, screws included



■ 30 Watt (max) ■ Frequency range: 50-18000 Hz ■ Impedance 4 Ohms ■ Sensitivity 88 dB ■ Mounting depth 31mm ■ 3m dual wire connecting cable with terminals ■ Powder coated paint finish (fixed grilles) ■ 4 easy mounting points, screws included



■ Flexible rubber aerial ■ Length 335mm ■ Detachable from base ■ Adjustable base mounting angle ■ 1.5m connecting cable with 3.5mm coaxial connecting plug



Metal antenna with grounding base. ■ Length 750mm with integral spring action ■ Detachable from base ■ 1m connecting cable with 3.5mm coaxial connecting plug

■ 1m connecting grounding cable for improved connection

■ Powder coated paint finish ■ Pack Content: 1 ■ Pack Qty: 1


1.5m dipole antenna cable. Easy to conceal amongst interior trim. Slim fit coaxial connecting plug for rear connection to audio head units. Pack Content: 1Pack Qty: 1


1m aerial extension cable with male and female coaxial connecting plugsPack Content: 1Pack Qty: 1


900mm connecting cable for Ipod. Connect an Ipod to audio units with USB and 3.5mm Jack connectors.Pack Content: 1Pack Qty: 1


142 |

A range of products to help customers keep their lawn and garden healthy as well as protect their John Deere equipment for years to come.

Turf Accessories

Turf Accessories (Products available in JDPoint through TS programmes B3, A9, A8)

143|Turf Accessories

144 |

Carts (Products available in JDPoint through TS programmes B3, A9, A8)

Carts

Heavy-duty, compression moulded poly bed with a heavy, consistent wall thickness for strength and durability.

The John Deere carts provide a steep dump angle for quicker, easier emptying.

The 200 litres Poly Tow Cart is great for hauling lawn debris, sand, dirt, mulch and plants. The heavy-duty poly bed has extreme durability and includes an easy dump release for complete emptying of material.

1 year warranty. Dimensions (cm): 114L x 84W x 30.5H

Part number: MCZLP2193500

The 280 litres Poly Tow Cart has a 295 kg load capacity and heavy-duty poly bed that won’t dent or rust. The 15” x 6” tubeless pneumatic tyres with turf tread allow for maximum traction. Easy dump release; steep angle for complete emptying.

1 year warranty. Dimensions (cm): 122L x 86.5W x 33H

Part number: MCZLPPCT10JD

7P (200 litres) Poly Cart

10P (280 litres) Poly Cart

145|

Spreaders (Products available in JDPoint through TS programmes B3, A9, A8)

Spreaders

Regular weeding, seeding, fertilising and pest control helps keep your lawn vibrant and growing strong. Granular seed and chemical materials apply easily with a John Deere Spreader.

Constructed of durable, rust-proof polyethylene, John Deere Spreaders stand up to even the most corrosive fertilisers, giving years of service – no matter what the weather. In winter, use your spreader to apply sand, salt and other melting agents.

John Deere Spreaders are excellent for year round use. Spreads seed, fertilizer and salt. The 23 kg Push Spreader has a durable poly hopper with a fully enclosed gear box for a long life and ergonomic split handle with adjustable height for smooth performance. The 13” pneumatic tires allow for easy rolling. Includes screen, cover, and side deflector.

Part number: MCZLP2287500

The large 100 litres, 80 kg capacity poly hopper features convenient Autoflow that stops material from spreading when tractor stops and patented Directional Flow Control to adjust spread pattern away from walks, driveways and flowerbeds. Features a long steel handle for quick and easy opening/closing; stainless steel hardware that eliminates rust and corrosion inside the hopper; enclosed gearbox eliminates maintenance and the tubeless pneumatic tires provide easier rolling.

Part number: MCZLPBS36JD0

23 kg Push Spreader

80 kg Tow-Behind Spreader

146 |

Gator & Riding Mower Covers (Products available in JDPoint through TS programmes B3, A9, A8)

Gator & Riding Mower Covers

Dual reinforced air vents let air circulate and help prevent ballooning in wind

Deluxe models feature EasyOn split back for fast fitting and easy access

Riding Mower Standard Cover Rear Discharge Riding Mower Standard Cover

Protects against sun and UV damage, rain, dust and tree sap. Dual vents let air circulate and help prevent ballooning in wind. Elastic cord in bottom hem for a quick and custom fit. Coated fabric for water protection. Handy storage pocket reverses into an attractive storage case. 1 Year Warranty. Fits all 100 -X300 Series Riding Mowers.

Part number: MCALP9391700

Protects against sun and UV damage, rain, dust and tree sap. Dual vents let air circulate and help prevent ballooning in wind. Elastic cord in bottom hem for a quick and custom fit. Coated fabric for water protection. Handy storage pocket reverses into an attractive storage case. 1 Year Warranty. Fits X305R, X155R, X135R and older tractor models with an integrated collection hopper.


147|

Gator & Riding Mower Covers (Products available in JDPoint through TS programmes B3, A9, A8)

Gator & Riding Mower Covers

All season protection against sun and UV damage, bad weather, dirt, birds and tree sap. WipeClean reinforced bottom around mower deck. EasyOn side handles make snugging down cover a snap. Dual reinforced air vents let air circulate and help prevent ballooning in wind.

Interior lining and integrated muffler heat shield. Heavy-duty fabric won’t stretch and is coated for maximum water resistance and repellency. Handy storage pocket reverses into an attractive storage case. EasyOn split back for fast fitting and easy access after installation. 2 Year Warranty. Fits X300-X700 Series


All season protection against sun and UV damage, bad weather, dirt, birds and tree sap. Dual reinforced air vents let air circulate and helps prevent ballooning in wind. Reinforced corners for added durability. Heavy-duty fabric won’t stretch and is coated for maximum water resistance and repellency. Elastic cord in bottom hem for a quick and custom fit. 2 Year Warranty. Fits Gator models with OPS or cab structure.


Riding mower deluxe cover – Large

Gator Cover – OPS or cab structure

Riding mower Deluxe cover – Medium

All season protection against sun and UV damage, bad weather, dirt, birds and tree sap. WipeClean reinforced bottom around mower deck. EasyOn side handles make snugging down cover a snap. Dual reinforced air vents let air circulate and help prevent ballooning in wind.

Interior lining and integrated muffler heat shield. Heavy-duty fabric won’t stretch and is coated for maximum water resistance and repellency. Handy storage pocket reverses into an attractive storage case. EasyOn split back for fast fitting and easy access after installation. 2 Year Warranty. Fits 100 Series


148 |

Gator & Riding Mower Seat Covers (Products available in JDPoint through TS programmes B3, A9, A8)

Gator & Riding Mower Seat Covers

Gator and Riding Mower Standard Seat Cover Riding Mower Seat Cover Gator and Riding Mower Standard Seat Cover

Cushioned covers protect new seats and renew old seats. Four convenient pockets keep tools and gear within reach. Elastic cord in bottom hem for a custom fit. Fits on seats 381mm tall. 2 Year Warranty. All season and UV protection.



Part Number: MCALP22704



LargeMediumSmall

149|

Gator and Riding Mower Standard Seat Cover

Walk Behind Mower Covers (Products available in JDPoint through TS programmes B3,

A9, A8)

Easy Turner for Riding Mowers (Product available in JDPoint through the TS programme RA and RB (NOTE: RC and RB for UK & Ireland, CY for Germany)

Walk Behind Mower Covers

Protects against sun and UV damage, rain, dust and tree sap. Covers both the mower and attached catcher on rear discharge mowers. Fabric coated for weather protection. Back closure makes installation and removal a snap. Elastic shock cord in bottom hem for a quick and custom fit. 2 Year Warranty. Fits most walk-behind mowers.


Walk-Behind Mower Cover

Easy Turner

The Easy Turner is an innovative tool for quick, easy and safe maintenance of a lawn tractor. It enables you to have easy access to your mower for maintenance and cleaning.Easy to useMachine is quickly rolled to the service position compared to competitive machines that use a jack system proven safety (TÜV- and GS-approved)

One-person jobExcellent access to service areas.

Part number: MCEasyturner

150 | High pressure washers

High pressure washers (Products available in JDPoint)

Availability date:

March 2015

Cleaning vehicles and buildings belongs to a standard procedure in the Agriculture business with high legal requirements when it comes to cleanliness and hygiene. Whether cold or hot water, for even more efficiency, John Deere offers a solution for every need. Simple to operate but great performance, the John Deere high pressure washers will help you in your daily business requirements.

151|High pressure washers

Electrical - Cold water range (Products available in JDPoint)

Technical dataType of current Ph / V / Hz 3 / 400 / 50Power rating kW 7Flow rate l / h 460-900Operating pressure bar / MPa 40-200 / 4-20Max. pressure bar / MPa 220 / 22Max. feed temperature °C 60Weight kg 48Dimensions (L x W x H) mm 467 x 407 x 1010

EquipmentTrigger gun Easy pressHigh-pressure hose m 10Spray lance mm 1050Triple nozzle / power nozzle ManualDirt blaster includedServo Control includedPart number MCAK15244080

This machine is extremely mobile and user-friendly with low-speed 4-pole three phase motors for continuous use.

AC-200EC:

Features

Chemicals switch:- For accurate and variable cleaning agent dosing- 2 wave dosing valve for switching between different cleaning agents- Easy cleaning agent bottle changeover

Powerful and durable:- Air/water-cooled electrical motors for intensive use- Four-pole low-speed electric motor- Ceramic-coated piston

Clever features: - Power cord storage at the rear of the machine- Integrated lance holder for easy transport- Parking position for short breaks- Quantity and pressure of water directly controlled at the trigger gun (Servo

Control)

Great mobility : - Large wheels for uneven surfaces- Upright design for easy, ergonomic transport- Integrated tilting aid at the rear



Technical dataType of current Ph / V / Hz 3 / 400 / 50Power rating kW 9.2Flow rate l / h 650-1300Operating pressure bar / MPa 30-180 / 3-18Max. pressure bar / MPa 198 / 19.8Max. feed temperature °C 60Weight kg 64Dimensions (L x W x H) mm 560 x 500 x 1090Cleaning agent tank l 6

Where vast amounts of dirt accumulate every day, this machine provides great service. Ideal for use in the construction, agricultural and forestry sectors as well as municipality.

AC-180EC

Features

Proven quality:- 4-pole water-cooled electric motor- Robust brass cylinder head and ceramic pistons- Reinforced, unbreakable plastic chassis

Hose storage:- Supported on both sides; for 20 m high-pressure hose- Hose guide passes under the unit; high stability- For fast, convenient fitting and removal

For increased safety: - Integrated electronics for unit monitoring- Automatic switch-off in case of under-voltage or over-voltage- Switches off in case of leaks or phase failure- Quantity and pressure of water directly controlled at the trigger gun

(Servo Control)

Great mobility : - Large rubber tires for uneven surfaces, stairs and landings- Proven sack trolley principle for easy, ergonomic transport

EquipmentTrigger gun Easy pressHigh-pressure hose m 20Spray lance mm 1050Triple nozzle / power nozzle TouchlessDirt blaster includedHigh-pressure hose reel includedServo Control includedPart number MCAK12925060



Technical dataType of current Ph / V / Hz 3 / 400 / 50Power rating kW 9.5Flow rate l / h 500-1600Operating pressure bar / MPa 30-150 / 3-15Max. pressure bar / MPa 190 / 19Max. feed temperature °C 60Weight kg 95Dimensions (L x W x H) mm 957 x 686 x 1080

EquipmentTrigger gun Easy pressHigh-pressure hose m 15Spray lance mm 1050Power nozzle includedDirt blaster includedServo Control includedPart number MCAK13671060

The cage version provides high mobility and outstanding performance for prolonged operating periods. High water flow rate quickly removes stubborn dirt and soiling.

AC-150ECC

Features

Cage frame:- Robust, powder-coated tubular steel frame- Integrated crane attachment point and accessory compartment

Electronic monitoring for greater operating safety:- Leakage protection and soft start- Over-voltage and under-voltage protection

Proven quality: - 4-pole air-cooled electric motor- Crankshaft pump- Quantity and pressure of water directly controlled at the trigger gun (Servo

Control)


Petrol engine – cold water (Products available in JDPoint)

Technical dataEngine manufacturer HondaEngine type GX 390 / PetrolEngine performance net.kW 8.2Engine performance, gross kW / hp 9.75 / 13Flow rate l / h 400-930Operating pressure bar / MPa 40-230 / 4-23Max. pressure bar / MPa 250 / 25Max. feed temperaturev°C 60Weight kg 66Dimensions (L x W x H) mm 1044 x 549 x 662

EquipmentTrigger gun Easy pressHigh-pressure hose m 15Spray lance mm 1050Tripple nozzle / Power nozzle TouchlessServo Control includedPart number MCAK18108000

Versatile cold-water machines with internal combustion engine for use where electrical connection is not available. This machine suits perfectly the requirements of the construction, agriculture and forestry industries, as well as municipalities.

AC-230PC

Features

Maximum performance:- With its brass cylinder heads, the 3-cylinder axial-piston engine unit ensures

exceptionally long service life- Direct-drive high-pressure pumps ensure super performance figures and

reliable operation- Infinitely variable pressure and water volume regulation on the device- Quantity and pressure of water directly controlled at the trigger gun (Servo

Control)

Maximum independence:- Selected engines ensure a long service life- Diverse performance classes for optimal use- Suitable for stand-alone use, independent of electrical supply

Optimum ease of use: - Automatic engine cut-out with low oil level- Speed reduction in idle for reducing operating noise and increasing service life - Stainless steel spray pipe

Great mobility : - Pneumatic tyres for easy maneuverability- Balanced centre of gravity and ergonomic design


Electrical – hot water (Products available in JDPoint)

Technical dataType of current Ph / V / Hz 3 / 400 / 50Power rating kW 8.4Flow rate l / h 600-1200Operating pressure bar / MPa 30-180 / 3-18Max. temperature °C 80 / 155Weight kg 178Dimensions (L x W x H) mm 1330 x 750 x 1060Cleaning agent tank l 20 + 10Fuel tank l 25Heating oil consuption kg/h 7.7 / 6.2Full load / eco!efficiency

High water flow and a number of features to tackle the toughest cleaning jobs.

AC-180EH

Features

Service switch:- Four water-hardness settings- Operating time and service interval data can be displayed- Exact dosing reduces water softener consumption- Eco efficiency mode- Quantity and pressure of water directly controlled at the trigger gun (Servo

Control)

LED display:- Fuel, cleaning agent, system maintenance indicators- Integrated operating hours counter

Cleaning agent dosing unit: - Precise metering valve ensures low consumption- Easy changeover between cleaning agent tanks 1 and 2- Rinsing takes place automatically in the 0 position

Accessory storage:- Integrated hose reel and spray lance holders on each side for safe transport- Within easy reach for left-handed or right-handed users and ideal for two-lance

operation- Integrated compartment with lid for storing tools, nozzles, dirt blaster, etc…

EquipmentTrigger gun Easy pressHigh-pressure hose m 10Spray lance mm 1050Power nozzle included

Dry-running protection included

SDS system includedServo Control includedPart number MCAK10716310

156 | Accessories

Accessories (Products available in JDPoint)

High-pressure hose longlife 400, 20 m

High-pressure hose longlife 400, 10 m

High-pressure hose (ID8), 20 m

Longlife 400 High-pressure hose (ID8), 15 m

– With rotating clutch. Reinforced with dual steel core.

– With screw connections on both sides, M 22 x 1.5 with bend protection.

– Max. working pressure: 400 bar – Length: 20 m – ID 8

Available as accessories for: AC-200EC, AC-180EC, AC-150ECC, AC-230PC, AC-180EH

Part number: MCAK63910370

– With rotating clutch. Reinforced with dual steel core.

– With screw connections on both sides, M 22 x 1.5 with bend protection.

– Max. working pressure: 400 bar – Length: 10 m – ID 8

Included in the delivery for: AC-180EH

Available as accessories for: AC-200EC, AC-180EC, AC-150EEC, AC-230PC


– Reinforced with dual steel core. – With patented AVS trigger gun

connector (rotatable) and – Coupling, M 22 x 1.5 with bend

protection. – Max. working pressure: 315 bar/31,5

Mpa – Length: 20 m – ID 8

Included in the delivery for: AC-180EC




protection. – Max. working pressure: 315 bar/31,5

Mpa – Length: 15 m – ID 8

Included in the delivery for: AC-230PC


High pressure washer’s accessories enhance the cleaning performance. They are developed and upgraded to meet the customer’s needs and assist users in their daily cleaning tasks.


High pressure hose, 25m, DN10, extension, not rotatable


Hose connector



protection. – Max. working pressure: 315 bar/31,5 Mpa – Length: 10 m – ID 8



– Screw connections at both ends, M 22 x 1.5, with kink protection

– Max. working pressure: 220 bar – Length: 25m – ID 10

Available as accessories for: AC-150ECC




protection. – Max. working pressure: 220 bar/22 Mpa – Length: 10m – ID 10

Included in the delivery for: AC-150ECC


– For connecting and extending HP hoses

– 2 x M 22 x 1.5 m connection, – Brass with rubber protection.



157|Accessories


Quick coupling

Male coupling

Cup foam lance

Double lance

– For fast spray lance/accessory changeover.

– With M 22 x 1.5 internal thread



– Hardened stainless steel hose nipple for quick-release coupling MCAK64010030

– With M 22 x 1.5 external thread



– Short, handy foam lance with 1L cleaning agent container on lance.

– Compact design. – Rotating connector M 22 x 1.5 – Variable cleaning agent dosage via

control on lance – Adjustable spray angle. – 1200l/h



– Working pressure continuously adjustable directly on the handle with full water flow.

– Ideal for agricultural use (e.g. for cleaning stables, cowsheds, etc.).

– Max. working pressure: 310 bar – Length: 960mm



Easy press high-pressure gun

Rotating spray lance

– Easy Press high-pressure trigger gun with soft grip.

– Integrated adapter and connector for high-pressure hoses M 22 x 1.5.



– Spray lances in 600 mm lengths, stainless steel with large manual coupling.

– Ergonomically shaped grip mouldings for optimum control and insulation.

– Can be swiveled 360° while under pressure.

– Max. working pressure: 300 bar



Spray pipe, rotatable

– Spray lances in 1050 mm lengths, stainless steel with large manual coupling.

– Ergonomically shaped grip moldings for optimum control and insulation.

– Can be swiveled 360° while under pressure.

– Max. working pressure: 300 bar

Included in the delivery for: AC-200EC, AC-180EC, AC-150ECC, AC-230PC, AC-180EH


158 | Accessories


Nozzle connector

Triple nozzle 050

Triple nozzle 047

– For protection and connection of Power nozzles at the spray lance.

Available as accessories for: AC-150ECC, AC-180EH


– Manually selectable triple nozzle with stainless steel nozzle.

– Robust, durable and non-clogging. – Convenient selection of high-pressure

pencil jet (0°), high-pressure fan jet with power nozzle (25°) and low-pressure fan jet (40°).

– For high-pressure cleaners with injectors; low-pressure fan jet for cleaning agent removal and application.

– M 18 x 1.5 connections. – Max. working pressure: 300 bar – Nozzle size: 50




– Robust, durable and non-clogging. Convenient selection of high-pressure pencil jet (0°), high-pressure fan jet with power nozzle (25°) and low-pressure fan jet (40°).



Included in the delivery for: AC-230PC

Triple nozzle 080

Dirt blaster 05

Dirt blaster 07/08


– Robust, durable and non-clogging. – Convenient selection of high-pressure

pencil jet (0°), high-pressure fan jet with power nozzle (25°) and low-pressure fan jet (40°).





– Dirt blaster – rotating pencil jet – 10 times the cleaning power.

– Ceramic nozzle / bearing ring for extremely long service life.

– Max. 300 bar / 30 MPa, 85°C. – Max. working pressure: 300 bar – Nozzle size: 50

Included in the delivery for: AC-200EC, AC-230PC





Available as accessories for: AC-180EC, AC-180EH


Servo control

Servo control

– For controlling water quantity and pressure directly at the trigger gun.

– For machines with water flow rate > 1.100 l/h

Available as accessories for: AC-180EC, AC-150ECC, AC-180EH


– For controlling water quantity and pressure directly at the trigger gun.

– For machines with water flow rate 750 - 1.100 l/h

Available as accessories for: AC-200EC, AC-230PC



159|Accessories


Power nozzle spray

Steam jet nozzle

– Fan jet nozzle for large area coverage and tackling stubborn dirt and stains.

– Angle: 25° – Nozzle size: 100



– 50° fan jet for cleaning and thawing in steam mode, e.g. thawing sand and gravel, de-icing

– formwork, de-waxing vehicles. – Nozzle size: 85

Available as accessories for: AC-180EH


Power nozzle spray

Dirt blaster 100

– Fan jet nozzle for large area coverage and tackling stubborn dirt and stains.

– Angle: 25° – Nozzle size: 68

Available as accessories for: AC-180EH







160 | Cleaning Agents

Cleaning Agents (Products available in JDPoint)

Picture Part number Product Description Application

Prim

ary

mix

ture

Dosa

ge

Prop

ertie

s

Pack

agin

g

size

Pack

ing

Unit

MCAK62958660

Machine protectorPrevents limescale deposits in hot water high-pressure cleaners. The formula offers improved protection against the build-up of limescale in heater coil systems (up to 150 °C) as well as integral corrosion protection for all hot water machine components that come into contact with water.Free from Nitrilotriacetates (NTA)

Hot water high-pressure cleaners

6 ml/°dH and m³

Neutral pH: 7

1L 6

MCAK62958670

Machine protectorPrevents limescale deposits in hot water high-pressure cleaners. The formula offers improved protection against the build-up of limescale in heater coil systems (up to 150 °C) as well as integral corrosion protection for all hot water machine components that come into contact with water.NTA free

Hot water high-pressure cleaners

6 ml/°dH and m³

Neutral pH: 7

10L 1

MCAK62958600

Active washEfficient and gentle-acting high-pressure cleaning concentrate for heavy oil, grease and mineral soiling. Suitable for cleaning vehicles,tarpaulins and engines. NTA free.

High-pressure cleaners spray units

1+31-5%

10-50%Alkaline pH: 12,3

2.5L 4

MCAK62958610



1+31-5%


10L 1

MCAK62958620



1+31-5%


20L 1

Cleaning agents have great advantages in terms of cleaning performance and time optimization. Whether they lower energy consumption or reduce drain water pollution, they are ideal for many usages.

161|Cleaning Agents

Cleaning Agents (Products available in JDPoint)

Picture Part number Product Description Application

Prim

ary

mix

ture

Dosa

ge

Prop

ertie

s

Pack

agin

g

size

Pack

ing

Unit

MCAK62958630

Oil and grease cleanerHighly concentrated high-pressure basic cleaning agent. At all temperature ranges, highly efficient lifting of the most stubborn contaminations, such as oil, grease, tar, soot and smoke resin.NTA free


1+31.5-10%

25%Alkaline pH: 13

10L 1

MCAK62958640

Oil and grease cleanerHighly concentrated high-pressure basic cleaning agent. At all temperature ranges, highly efficient lifting of the most stubborn contaminations, such as oil, grease, tar, soot and smoke resin.NTA free


1+31.5-10%

25%Alkaline pH: 13

20L 1

MCAK62958650

Hot waxPaintwork preservation and care productwith high natural carnauba wax content. Produces a high lustre finishNTA free.

High-pressure cleaners manual

1+3 1-2%Slightly acidic

pH: 4.510L 1

MCAK62958680

Foam detergentThe foam cleaner has excellent grease-dissolving properties and removes organic material such as dung and dirt. Ideal for cleaning poultry, pig and cattle sheds as well as milk parlours.

High-pressure cleaners 3-5%Alkaline pH: 13,5

10L 1

MCAK62958690

Soaking detergentThe emollient loosens dried dung to reduce cleaning time and water consumption. Corrosion inhibitors preserve stable fixtures. Ideal for stables and milk parlours.

High-pressure cleaners 1-3%Alkaline pH: 14

10L 1

MCAK62958700

Surface cleanerAcid surface cleaner for milk parlours, milk rooms and stables. Removes even the most stubborn deposits, such as limescale, minerals and corrosion. Corrosion inhibitors preserve stablefixtures.

High-pressure cleaners 1-3%Alkaline pH: 14

10L 1

164 |

Batteries

Batteries

165|

Batteries (Products available in JDPoint through TS programme 0T, 8T and BH)

A complete range of Battery accessories and Booster cables can be found on pg 32 – 40

Batteries

The power to perform

Whether you choose from our line of standard-duty Performance batteries or our heavy-duty StrongBox line, we have the battery for every need. And, although our batteries are branded John Deere, they fit most any brand of vehicle or equipment.

StrongBox Batteries

Specific John Deere features include: ■ Built to John Deere specifications

■ Superior starting performance even under extreme operating conditions

■ Extreme vibration proof: longer life than competition in SAE J930 vibration test by independent laboratory.

■ High charge and discharge durability, even when the engine is switched off

John Deere StrongBox batteries come in two main different grades to suit your voltage system and operating requirements.

StrongBox – Wet batteries line for EU machines

John Deere StrongBox Wet means top quality batteries that are factory filled and fully activated. So they are ready to go when you are!

These batteries are maintenance free and benefit from the advantage of continuous superior starting power (even in extreme conditions), optimum vibration resistance and longer life. They feature better cycle stability, very low water consumption and very low self-discharge.

Wet batteries technology:

■ The technology itself: the stable and complete grid framework itself minimizes grid growth and prevents short circuit. This gives a clear increase in service life

■ The grid design: built for maximum flow of current, the grid design enables faster recharge acceptance and optimal conductivity. The design ensures there is more lead where electrical current is greatest to give consistently higher starting power.

■ The grid structure: production of the grid using a continuous, high precision punching process ensures robust structure and excellent adhesion of active mass paste to ensure high quality, stable grid structure and minimal corrosion.

166 |

6

4

2

1

3

5

Batteries

Batteries (Products available in JDPoint through TS programme 0T, 8T and BH)

A complete range of Battery accessories and Booster cables can be found on pg 32 – 40

Dry batteries technology:1. Dry charged at the factory for initial storing, StrongBox batteries are

activated for you at the time of purchase.2. Through-the-wall, welded intercell connectors are 12-percent larger than

in other batteries, withstand vibration, and provide quick starts and increased power in extreme cold.

3. Super radial grid design with inboard lug permits electrical current to flow more efficiently, and provides higher cranking amps, faster charge, and corrosion resistance.

4. Extra-heavy plates give extra reserve power. Especially on extremely cold days.

5. Microporous plastic envelope separators eliminate electrical shorts and keep positive material from touching the negative plate. Plus, they help prevent the corrosion and misalignment of separators that can cause shorts.

6. Epoxy-anchored plates make StrongBox batteries four times stronger than traditional plates. This reduces vibration damage – a leading cause of failure in commercial batteries.

Performance BatteriesJohn Deere Performance represents a standard product range. It is an economical alternative to the premium line of StrongBox batteries for multi-use applications. Built to meet industry specifications; ideal for applications that do not require the exclusive technology and original-equipment design of a StrongBox battery.

Quality Design Features:

■ Container and lid in high resistance Polypropylene.

■ Reinforced connections protect against vibration.

■ Envelope separators eliminate electrical shorts and prevent corrosion.

■ Reliable Performance

■ High starting power in all seasons

■ Optimal energy storage & long endurance

Applications Agricultural, commercial, automotive, light truck, sport utility, lawn and garden, utility vehicle, golf cart, electric vehicle, and marine.

StrongBox – Dry batteries line for US machines

StrongBox batteries are available for Ag, construction, off-road and fleet applications. These batteries features heavy duty poly containers, plate anchoring, and plate insulation to protect against vibration.

Applications

■ All makes of heavy- and standard-duty equipment used on farms, ranches, and construction sites

■ General utility and lawn and garden equipment

■ Electric vehicles, sport utility vehicles, and ATVs.

167|StrongBox Batteries

StrongBox Batteries (Products available in JDPoint through TS programs 0T (1T-2T for France))

StrongBox Batteries – EU machinesAL175868 AL203836

AL203837 AL203838

AL203839 AL203840

Benefit: Maintenance free – no need to refillArea of application: Utility and Mid tractorsTechnology: Lead-Calcium/WetVoltage: 12Ah: 110CCA (EN):850Dimensions: 394/175/190 mmBox size: H9Hold Down: B13ETN Layout: 0Terminal: 1Total weight: 27,48 kgShelf life* (in month): 15Pallet qty: 24

Benefit: Maintenance free – no need to refillArea of application: Older utility tractorsTechnology: Lead-Calcium /WetVoltage: 12Ah: 55CCA (EN):480Dimensions: 247/175/190 mmBox size: H5Hold Down: B13ETN Layout: 0Terminal: 1Total weight: 15,05 kgShelf life* (in month): 15Pallet qty: 21

Benefit: Maintenance free – no need to refillArea of application: Older utility tractorsTechnology: Lead-Calcium/WetVoltage: 12Ah: 70CCA (EN):570Dimensions: 278/175/190 mmBox size: H6Hold Down: B13ETN Layout: 0Terminal: 1Total weight: 17,55 kgShelf life* (in month): 15Pallet qty: 16

Benefit: Maintenance free – no need to refill. Area of application: Uitlity tractor, combines, SPFHTechnology: Lead-Calcium/WetVoltage: 12Ah: 88CCA (EN):680Dimensions: 353/175/190 mmBox size: H8Hold Down: B13ETN Layout: 0Terminal: 1Total weight: 21,84 kgShelf life* (in month): 15Pallet qty: 24

Benefit: Maintenance free – no need to refillArea of application: Utility and Mid tractors – IT4 engines (can be used in not IT4 engines)Technology: Lead-Calcium/WetVoltage: 12Ah: 154CCA (EN):1150Dimensions: 513/189/223 mmBox size: AHold Down: B00ETN Layout: 3Terminal: 1Total weight: 39,84 kgShelf life* (in month): 15Pallet qty: 24

Benefit: Maintenance free – no need to refillArea of application: Mid tractor, Combines, SPFH, SprayerTechnology: Lead-Calcium/WetVoltage: 12Ah: 174CCA (EN):1400Dimensions: 513/223/223 mmBox size: BHold Down: B00ETN Layout: 3Terminal: 1Total weight: 45,67 kgShelf life* (in month): 15Pallet qty: 21

* when fully charged and in right storage conditions

168 | StrongBox Batteries

StrongBox Batteries (Products available in JDPoint through TS programs 0T (1T-2T for France))

StrongBox Batteries – EU machines

AL205731

AL210285

Benefit: Maintenance free – no need to refillArea of application: Utility and Mid tractors – not for IT4 , CombinesTechnology: Lead-Calcium/WetVoltage: 12Ah: 110CCA (EN):850Dimensions: 413/175/220 mmBox size: DHold Down: B13ETN Layout: 0Terminal: 1Total weight: 26,75 kgShelf life* (in month): 15Pallet qty: 24

Benefit: Maintenance free – no need to refillArea of application: Mid tractors, TelehandlerTechnology: Lead-Calcium/WetVoltage: 12Ah: 154CCA (EN):1150Dimensions: 513/189/223 mmBox size: AHold Down: B00ETN Layout: 3Terminal: 1Total weight: 40,60 kgShelf life* (in month): 15Pallet qty: 24


169|

EPEX005 MCEXTY25881W (not available in Italy and JDIN)

Benefit: Maintenance free – no need to refill Leak proof High power supplyArea of application: lawnmowers and small turf machinesTechnology: Gel/activatedVoltage: 12Ah: 30CCA (EN): 200Dimensions: 197/132/180 mmBox Size: U01Hold Down: B01ETN Layout: 1Terminal: EN full Ford LogTotal Weight: 11,70 kg Shelf life* (in month): 12Pallet qty: 18

Benefit: Maintenance free – no need to refillArea of application: Compact utility tractors, utility vehicles, riding mowersTechnology: Silver – Calcium/WetVoltage: 12Ah: 47CCA (EN): 465Dimensions: 240/140/227 mmBox Size: G46Hold Down: B6ETN Layout: 1Terminal: EN taper PostTotal Weight: 15,60 kg Shelf life* (in month): 12Pallet qty: 16

StrongBox Batteries

StrongBox Batteries (Products available in JDPoint through TS programme 8T)

StrongBox Batteries – US machines

MCEXTY6128W (not available in Italy and JDIN)

Benefit: Higher vibration resistanceArea of application: Large tractorsTechnology: Hybrid/WetVoltage: 12Ah: 105CCA (EN):900Dimensions: 330/173/240 mmBox Size: G31Hold Down: B0ETN Layout: 9Terminal: EN taper PostTotal Weight: 26,10 kg Shelf life* (in month): 12Pallet qty: 18


TY24341 (not available in Spain, Italy)

TY24394 (not available in Spain, Italy)

Benefit: Higher vibration resistanceArea of application: Older TractorsTechnology: Hybrid/DryVoltage: 12Ah: 72CCA (EN):580Dimensions: 491/111/249 mmBox Size: 3ETHold Down: 0ETN Layout: 1T erminal: EN taper PostTotal Weight: 15,45 kg Shelf life* (in month): 24Pallet qty: 20

Benefit: Higher vibration resistanceArea of application: Older Compact utility vehiclesTechnology: Hybrid/DryVoltage: 12Ah: 75CCA (EN):600Dimensions: 318/173/227 mmBox Size: G27Hold Down: B7ETN Layout: 0Terminal: EN taper PostTotal Weight: 14,63 kg Shelf life* (in month): 24Pallet qty: 18Available as long as stock last

170 | StrongBox Batteries

StrongBox Batteries (Products available in JDPoint through TS programme 8T)

StrongBox Batteries – US machines

TY25514 (not available in Italy) TY25876

TY25879 TY25881 (not available in Spain, France, UK, Germany)

Benefit: Higher vibration resistanceArea of application: Compact utility tractors, utility vehiclesTechnology: Hybrid/DryVoltage: 12Ah: 60CCA (EN):650Dimensions: 278/175/190 mmBox Size: G48Hold Down: B13ETN Layout: 0Terminal: EN taper PostTotal Weight: 14,09 kg Shelf life* (in month): 24Pallet qty: 24Available as long as stock last

Benefit: Maintenance free – no need to refillArea of application: Utility vehicles, riding mowersTechnology: Silver – Calcium/DryVoltage: 12Ah: 47CCA (EN):470Dimensions: 238/129/223 mmBox Size: G51Hold Down: B0ETN Layout: 1Terminal: EN taper PostTotal Weight: 8,59 kg Shelf life* (in month): 24Pallet qty: 16

Benefit: Maintenance free – no need to refillArea of application: Compact utility tractors, large tractorsTechnology: Silver – Calcium /DryVoltage: 12Ah: 100CCA (EN):860Dimensions: 330/173/240 mmBox Size: G31Hold Down: B0ETN Layout: 9Terminal: EN taper PostTotal Weight: 21,00 kg Shelf life* (in month): 24Pallet qty: 18

Benefit: Maintenance free – no need to refillArea of application: Compact utility tractors, utility vehicles, riding mowersTechnology: Silver – Calcium/DryVoltage: 12Ah: 47CCA (EN):465Dimensions: 240/140/228 mmBox Size: G45Hold Down: B6ETN Layout: 1Terminal: EN taper PostTotal Weight: 10,20 kg Shelf life* (in month): 24Pallet qty: 32


TY25221 TY25272

Benefit: Higher vibration resistanceArea of application: Utility vehicles, riding mowersTechnology: Hybrid/DryVoltage: 12Ah: 30CCA (EN):320Dimensions: 197/132/186 mmBox Size: U01Hold Down: B0ETN Layout: 1Terminal: EN small Ford lugTotal Weight: 6,80 kg Shelf life* (in month): 24Pallet qty: 37

Benefit: Higher vibration resistanceArea of application: CombinesTechnology: Hybrid/DryVoltage: 12Ah: 75CCA (EN):610Dimensions: 306/173/225 mmBox Size: G27Hold Down: B7ETN Layout: 1Terminal: EN taper PostTotal Weight: 14,63 kg Shelf life* (in month): 24Pallet qty: 18

171|

StrongBox Batteries – US machinesTY26498 TY6192 (not available in Spain)

Benefit: Maintenance free – no need to refillArea of application: Compact utility tractorsTechnology: Silver – Calcium/DryVoltage: 12Ah: 47CCA (EN):465Dimensions: 241/175/241 mmBox Size: G2NHold Down: B6ETN Layout: 0Terminal: EN taper PostTotal Weight: 10,18 kg Shelf life* (in month): 24Pallet qty: 16

Benefit: Higher vibration resistanceArea of application: Compact utility tractors, utility vehiclesTechnology: Hybrid/DryVoltage: 12Ah: 57CCA (EN):465Dimensions: 241/175/211 mmBox Size: G22Hold Down: B9ETN Layout: 0Terminal: EN taper PostTotal Weight: 10,43 kg Shelf life* (in month): 24Pallet qty: 28

StrongBox Batteries

StrongBox Batteries (Products available in JDPoint through TS programs 8T)


172 | Performance Batteries

Performance Batteries (Products available in JDPoint through TS programs 8T)

MCEX1000PF

MCEX1130PF

MCEX1200PF

MCEX1390PF

MCEX330PF (France only)

Benefit: Maintenance free – no need to refill Area of application: Large tractorsTechnology: Lead-Calcium/WetDIN/BBMS Standard: 66514, 67018, 68022 / 629Voltage: 12Ah: 180CCA (EN):1000Dimensions: 513/223/223 mm Box Size: BHold Down: B0ETN Layout: 3Terminal: EN tapered PostTotal Weight: 44,62 kgShelf life time (months)*: 12Pallet qty: 14Old BBMS: 621

Benefit: Maintenance free – no need to refillArea of application: Large tractors, constructionTechnology: Lead-Calcium/WetDIN/BBMS Standard: 645 13 / 627Voltage: 12Ah: 152CCA (EN):1130Dimensions: 513/189/223 mm Box Size: AHold Down: B0ETN Layout: 3Terminal: EN tapered PostTotal Weight: 42,90 kgShelf life time (months)*: 12Pallet qty: 16Old BBMS: 637

Benefit: Maintenance free – no need to refill Area of application: Large tractors, constructionTechnology: Lead-Calcium/WetDIN/BBMS Standard: 700 27, 710 14, 720 18, 725 12 / 625Voltage: 12Ah: 215CCA (EN):1200Dimensions: 518/279/240 mm Box Size: CHold Down: B0ETN Layout: 3Terminal: EN tapered PostTotal Weight: 55,72 kgShelf life time (months)*: 12Pallet qty: 12Old BBMS: 325

Benefit: Maintenance free – no need to refillArea of application: Large tractors, constructionTechnology: Lead-Calcium/WetDIN/BBMS Standard: 680 32 / 629Voltage: 12Ah: 172CCA (EN):1390Dimensions: 513/223/223 mm Box Size: D05Hold Down: B0ETN Layout: 3Terminal: EN tapered PostTotal Weight: 49,90 kgShelf life time (months)*: 12Pallet qty: 14Old BBMS: 621

Benefit: Maintenance free – no need to refillArea of application: SpezialanwendungenTechnology: Lead-Calcium/WetVoltage: 12Ah: 45CCA (EN):330Dimensions: 220/135/225 mm Box Size: E02Hold Down: B13ETN Layout: 1Terminal: EN tapered PostTotal Weight: 11,55 kgShelf life time (months)*: 12Pallet qty: 29


MCEX420PF

Benefit: Maintenance free – no need to refillArea of application: Riding mowers, utility tractorsTechnology: Lead-Calcium/WetDIN/BBMS Standard: 536 46, 543 20, 544 65 / 063Voltage: 12Ah: 44CCA (EN):420Dimensions: 207/175/175 mm Box Size: LB1Hold Down: B13ETN Layout: 0Terminal: EN tapered PostTotal Weight: 11,97 kgShelf life time (months)*: 12Pallet qty: 24

173|Performance Batteries


MCEX450PF

MCEX520PF

MCEX540PF

MCEX550PF

Benefit: Maintenance free – no need to refillArea of application: Utility tractorsTechnology: Lead-Calcium/WetDIN/BBMS Standard: 544 59 / 079Voltage: 12Ah: 50CCA (EN):450Dimensions: 207/175/190 mm Box Size: L01Hold Down: B13ETN Layout: 0Terminal: EN tapered PostTotal Weight: 12,80 kgShelf life time (months)*: 12Pallet qty: 23Old BBMS: 012

Benefit: Maintenance free – no need to refillArea of application: Compact utility tractorsTechnology: Lead-Calcium/WetDIN/BBMS Standard: 545 19, 550 46, W065SE / 065Voltage: 12Ah: 54CCA (EN):520Dimensions: 242/175/175 mm Box Size: LB2Hold Down: B13ETN Layout: 0Terminal: EN tapered PostTotal Weight: 14,22 kgShelf life time (months)*: 12Pallet qty: 19Old BBMS: 075

Benefit: Maintenance free – no need to refillArea of application: Utility tractorsTechnology: Lead-Calcium/WetDIN/BBMS Standard: 555 59, 562 19 / 027Voltage: 12Ah: 60CCA (EN):540Dimensions: 242/175/190 mm Box Size: L2Hold Down: B13ETN Layout: 0Terminal: EN tapered PostTotal Weight: 15,09 kgShelf life time (months)*: 12Pallet qty: 20Old BBMS: 075

Benefit: Maintenance free – no need to refillArea of application: Utility tractors, large tractorsTechnology: Lead-Calcium/WetDIN/BBMS Standard: 570 24 / 031Voltage: 12Ah: 70CCA (EN):550Dimensions: 270/173/222 mm Box Size: D26Hold Down: B9ETN Layout: 1Terminal: JIS taper PostTotal Weight: 17,89 kgShelf life time (months)*: 12Pallet qty: 18Old BBMS:069


MCEX640PF

MCEX680PF1

Benefit: Maintenance free – no need to refillArea of application: Tractors, automotiveTechnology: Lead-Calcium/WetDIN/BBMS Standard: 566 38, 570 12, 574 12 / 096Voltage: 12Ah: 70CCA (EN):640Dimensions: 278/175/190 mm Box Size: L3Hold Down: B13ETN Layout: 0Terminal: EN tapered PostTotal Weight: 17,41 kgShelf life time (months)*: 12Pallet qty: 17Old BBMS: 67

Benefit: Maintenance free – no need to refillArea of application: Large tractorsTechnology: Lead-Calcium/WetDIN/BBMS Standard: 572 19 / 082Voltage: 12Ah: 74CCA (EN):680Dimensions: 278/175/190 mm Box Size: L3Hold Down: B13ETN Layout: 1Terminal: EN tapered PostTotal Weight: 17,68 kgShelf life time (months)*: 12Pallet qty: 17

174 | Performance Batteries


MCEX620PF

MCEX680PF

MCEX700PF

Benefit: Maintenance free – no need to refillArea of application: Tractors, construction equipmentTechnology: Lead-Calcium/WetDIN/BBMS Standard: 564 20, 565 30, 571 13 / 096Voltage: 12Ah: 63CCA (EN):620Dimensions: 278/175/175 mm Box Size: LB3Hold Down: B13ETN Layout: 0Terminal: EN tapered PostTotal Weight: 16,55 kgShelf life time (months)*: 12Pallet qty: 17Old BBMS: 100

Benefit: Maintenance free – no need to refillArea of application: Tractors, construction equipmentTechnology: Lead-Calcium/WetDIN/BBMS Standard: 588 11, 595 14, 600 26 / 600 27, 605 25, 221Voltage: 12Ah: 110CCA (EN):680Dimensions: 413/175/220 mm Box Size: D01Hold Down: B3ETN Layout: 0Terminal: EN tapered PostTotal Weight: 27,72 kgShelf life time (months)*: 12Pallet qty: 24

Benefit: Maintenance free – no need to refillArea of application: Automotive, utility tractorsTechnology: Lead-Calcium/WetDIN/BBMS Standard: 580 35 / 115Voltage: 12Ah: 80CCA (EN):700Dimensions: 315/175/190 mm Box Size: L4Hold Down: B13ETN Layout: 0Terminal: EN tapered PostTotal Weight: 18,90 kgShelf life time (months)*: 12Pallet qty: 17Old BBMS: 110


MCEX720PF

MCEX750PF1

MCEX780PF

Benefit: Maintenance free – no need to refillArea of application: utility tractors, mid tractorsTechnology: Lead-Calcium/WetDIN/BBMS Standard: 588 27, 600 38 / 017Voltage: 12Ah: 90CCA (EN): 720Dimensions: 353/175/190 mm Box Size: L5Hold Down: B13ETN Layout: 0Terminal: EN tapered PostTotal Weight: 21,86 kgShelf life time (months)*: 12Pallet qty: 24Old BBMS: 019

Benefit: Maintenance free – no need to refillArea of application: Mid tractors, construction equipmentTechnology: Lead-Calcium/WetDIN/BBMS Standard: 610 48 / 664Voltage: 12Ah: 110CCA (EN): 750Dimensions: 349/175/235 mm Box Size: D02Hold Down: B0ETN Layout: 1Terminal: EN tapered PostTotal Weight: 27,48 kgShelf life time (months)*: 12Pallet qty: 18Old BBMS: 644

Benefit: Maintenance free – no need to refillArea of application: Telehandler, constructionTechnology: Lead-Calcium/WetDIN/BBMS Standard: 585 15 / 112Voltage: 12Ah: 85CCA (EN): 780Dimensions: 353/175/175 mm Box Size: LB8Hold Down: B13ETN Layout: 0Terminal: EN tapered PostTotal Weight: 20,67 kgShelf life time (months)*: 12Pallet qty: 18Old BBMS: 017 low

175|


MCEX750PF

MCEX760PF

MCEX800PF

Benefit: Maintenance free – no need to refillArea of application: Mid tractorsTechnology: Lead-Calcium/WetDIN/BBMS Standard: 610 47 / 663Voltage: 12Ah: 110CCA (EN): 750Dimensions: 349/175/235 mm Box Size: D02Hold Down: B0ETN Layout: 0Terminal: EN tapered PostTotal Weight: 27,48 kgShelf life time (months)*: 12Pallet qty: 18Old BBMS: 643

Benefit: Higher vibration resistanceArea of application: Mid tractors, construction equipmentTechnology: Hybrid/WetDIN/BBMS Standard: 610 40 / 615Voltage: 12Ah: 110CCA (EN): 760Dimensions: 512/175/210 mm Box Size: DB8Hold Down: B3ETN Layout: 3Terminal: EN tapered PostTotal Weight: 33,50 kgShelf life time (months)*: 12Pallet qty: 16Old BBMS: 617

Benefit: Maintenance free – no need to refill Area of application: Mid tractorsTechnology: Lead-Calcium/WetDIN/BBMS Standard: 635 30, 640 20 / 627Voltage: 12Ah: 140CCA (EN): 800Dimensions: 513/189/223 mm Box Size: AHold Down: B0ETN Layout: 3Terminal: EN tapered PostTotal Weight: 36,67 kgShelf life time (months)*: 12Pallet qty: 16Old BBMS: 637


Performance Batteries

MCEX800PF1

MCEX800PFAGM

MCEX850PF

Benefit: Maintenance free – no need to refillArea of application: Mid tractors, construction equipmentTechnology: Lead-Calcium/WetVoltage: 12Ah: 95CCA (EN): 800Dimensions: 353/175/190 mm Box Size: L05Hold Down: B13ETN Layout: 1Terminal: EN tapered PostTotal Weight: 22,3 kgShelf life time (months)*: 12Pallet qty: 24

Benefit: High CCA performance in small boxArea of application: Mid tractorsTechnology: AGM/activatedDIN/BBMS Standard: Orbital / Optima, AGM-Spiral-Cell, MAX900Voltage: 12Ah: 50CCA (EN): 800Dimensions: 260/173/206 mm Box Size: G34Hold Down: B7ETN Layout: 9Terminal: SAE M 3/8" – 5/16" taper&studTotal Weight: 17,93 kgShelf life time (months)*: 12Pallet qty: 18Old BBMS: 069AGM

Benefit: Maintenance free – no need to refillArea of application: Mid tractors, construction equipmentTechnology: Lead-Calcium/WetDIN/BBMS Standard: 600 32 / 030Voltage: 12Ah: 100CCA (EN): 850Dimensions: 306/173/222 mm Box Size: D31Hold Down: Korean B1ETN Layout: 0Terminal: EN tapered PostTotal Weight: 23,60 kgShelf life time (months)*: 12Pallet qty: 15Old BBMS: 068

176 |


MCEX800PF4 (France only)

MCEX850PFLH4

MCEX850PF1

Benefit: Maintenance free – no need to refillArea of application: Mid tractors, construction equipmentTechnology: Lead-Calcium/WetVoltage: 12Ah: 140CCA (EN): 800Dimensions: 510/175/225 mm Box Size: D08Hold Down: B3ETN Layout: 4Terminal: EN tapered PostTotal Weight: 37,50 kgShelf life time (months)*: 12Pallet qty: 12

Benefit: Maintenance free – no need to refillArea of application: Utility tractorsTechnology: Lead-Calcium/WetVoltage: 12Ah: 105CCA (EN): 800Dimensions: 315/175/205 mm Box Size: LH4Hold Down: B13ETN Layout: 0Terminal: EN tapered PostTotal Weight: 23,10 kgShelf life time (months)*: 12Pallet qty: 17

Benefit: Maintenance free – no need to refillArea of application: Mid tractors, construction equipmentTechnology: Lead-Calcium/WetDIN/BBMS Standard: 600 33 / 031Voltage: 12Ah: 100CCA (EN): 850Dimensions: 306/173/222 mm Box Size: D31Hold Down: Korean B1ETN Layout: 1Terminal: EN tapered PostTotal Weight: 23,60 kgShelf life time (months)*: 12Pallet qty: 15Old BBMS: 069



MCEX900PF

MCEX950PF

MCYP200PF

Benefit: Maintenance free – no need to refillArea of application: Tractors, construction equipmentTechnology: Lead-Calcium/WetDIN/BBMS Standard: 600 38 / 017Voltage: 12Ah: 100CCA (EN): 900Dimensions: 353/175/190 mm Box Size: L5Hold Down: B13ETN Layout: 0Terminal: EN tapered PostTotal Weight: 23,39 kgShelf life time (months)*: 12Pallet qty: 17Old BBMS: 019

Benefit: Maintenance free - no need to refillArea of application: Mid tractors, construction equipmentTechnology: Lead-Calcium/WetDIN/BBMS Standard: 630 13, 643 22, 643 23, 643 29 / 620Voltage: 12Ah: 170CCA (EN): 950Dimensions: 514/218/210 mm Box Size: DB9Hold Down: B3ETN Layout: 3Terminal: EN tapered PostTotal Weight: 42,50 kgShelf life time (months)*: 12Pallet qty: 14

Area of application: Turf equipemntTechnology: Antimony/DryDIN/BBMS Standard: 52401 / –Voltage: 12Ah: 24CCA (EN): 200Dimensions: 186/125/177 mm Box Size: MobaHold Down: B00ETN Layout: 1Terminal: 4Total Weight: 8,78 kgShelf life time (months)*: 36 Pallet qty: 2

177|

MCEX680PF0

Benefit: Maintenance free - no need to refill Area of application: Tractors, construction equipment Technology: Lead-Calcium/WetDIN/BBMS Standard: 574 12/ 067, 096Voltage: 12Ah: 74CCA: 680Dimensions (mm): 278/175/190 Box Size: L03Hold Down: B13ETN Layout: 0Terminal: EN tapered PostTotal Weight (kg): 17,70Shelf life time (months) *: 12Pallet qty: 17

Area of application: Mid tractors, construction equipmentTechnology: Hybrid/WetDIN/BBMS Standard: 635 41/617Voltage: 12Ah: 135CCA: 1000Dimensions (mm): 512/175/210Box Size: DB8Hold Down: B3ETN Layout: 3Terminal: EN tapered PostTotal Weight (kg): 36,00Shelf life time (months) *: 12Pallet qty: 16


MCEX1000PF3 (not available in Italy)



178 | Standard Batteries / Trojan Batteries for E-Gator

Standard Batteries / Trojan Batteries for E-Gator

EPYP53030 (not available in UK) EPYP552401 (not available in UK, Spain and France)

MCEXYTX4L-BS

Area of application: Speciality tractors, Turf, motorbikesTechnology: Antimony/DryDIN/BBMS Standard: 53030Voltage: 12Ah: 30CCA (EN):300Dimensions: 186/130/171 mmBox size: MobaHold Down: B00ETN Layout: 0Terminal: 4Total weight: 10,06 kgShelf life* (in month): 36

Benefit: Maintenance free – no need to refillArea of application: Commercial mowingTechnology: Lead-Calcium/WetDIN/BBMS Standard: 55401Voltage: 12Ah: 52CCA (EN):520Dimensions: 207/175/175 mmBox size: H4Hold Down: B13ETN Layout: 0Terminal: 1Total weight: 11,97 kgShelf life* (in month): 15

Area of application: Walk behind mowersTechnology: AGM/DryVoltage: 12Ah: 3CCA (EN):50Dimensions: 115/70/85 mmBox size: C35

Hold Down: B0ETN Layout: 0Terminal: M04Total weight: 1,49 kgShelf life* (in month): 12

Standard Batteries (products available in JDPoint through TS programs 0T and 8T)

MCT145 MCT105 (not available in UK)

Benefit: Deep cycleArea of application: Electrical utility vehicles, golf cartTechnology: Lead-Antimony/WetVoltage: 6Ah: 260Dimensions: 262/181/302 mm Box Size: GC2 (BCI)Terminal: LPT, HPT, APTotal Weight: 33,00 kgShelf life time (months)*: 6

Benefit: Deep cycleArea of application: Electrical utility vehicles, golf cartTechnology: Lead-Antimony/WetVoltage: 6Ah: 225Dimensions: 262/181/281 mm Box Size: GC2 (BCI)Terminal: LPT, WNT, AP, UT, LTTotal Weight: 28,00 kgShelf life time (months)*: 6

Trojan Batteries for E-Gator (Products available in JDPoint through TS programs BH)

* when fully charged and in right storage conditions* when fully charged and in right storage conditions

179|Batteries

Batteries

182 |

Crop Packaging

Crop Packaging

There are many reasons for choosing genuine John Deere crop packaging products. Designed and tested for your John Deere baler, they are guaranteed to perform.

Our crop packaging products are the perfect result of close teamwork between the worldwide leaders in baling products. The combination of their knowledge of the baling business and John Deere’s rigorous verification and validation processes, ensures outstanding performance in all areas.

Quick to load. Easy to use. And designed for a long life.

183|

Crop Packaging

Crop Packaging

John Deere Netwrap

Only John Deere Netwrap is designed specifically for the John Deere balers. However they also fit most of the competitive machines.Carrying handles, Zebra System and Red stripe are standard features of all John Deere Netwrap.

XtraNet – Edge to Edge protection

XtraNet 4200 m with Bale+ Technology

XtraNet 3600 m

CoverEdge 3,800m

– 40 % more roll length than standard 3000 m net rolls – for maximum baler utilization. – More net strength (minimum strength > 270 kgf) – for maximum performance – Good roll weight – Long lasting roll consistency – 2 rolls can provide enough net to bale all day – Low cost per bale

– 20% more roll length than standard 3000 m netwrap. – More bales per roll. Fewer time wasting interruptions to change rolls. – Less packaging waste and greater efficiency. – Low cost per bale

– Unique and only available through John Deere dealers – 3,800m, longer but same weight than 3,300m roll – 15% more bales with each roll – More productivity, less downtime – New plastic insert:

- stop from collapsing - 1 kg lighter - increased marketability and compatibility in competitive balers

Item DescriptionNetwrap

WidthRoll

lengthRoll

weightRolls

Per PalletCountry availability

John Deere CoverEdge B+ 3800m 130 cm 3.800 m 42 kg 28 DK, FI, NO, SE, ES, IT, AT, BA, CZ, EE, DE, FR, GR, HU, LT, NL, RO, RU, SK, SI, CH, PL, UK, IE

John Deere Netwrap 2000m NC 123 cm 2.000 m 20,5 kg 50 AT, BA, CZ, EE, DE, FR, GR, KZ, LT, NL, RO, SK, SI, CH, PL

John Deere Netwrap 3000m NC 123 cm 3.000 m 29 kg 36 AT, BA, CZ, EE, DE, FR, GR, KZ, LT, NL, RO, RU, SK, SI, CH, PL

John Deere Xtranet 2800m 123 cm 2.800 m 31 kg 36 NO, SE, AT, BA, CZ, EE, DE, FR, GR, HU, KZ, LT, NL, RO, RU, SK, SI, CH, PL

John Deere Xtranet 2800m (high UV formulation) 123 cm 2.800 m 31 kg 36 ES, IT

John Deere Xtranet 3600m 123 cm 3.600 m 40 kg 28 FI, NO, SE, AT, BA, CZ, EE, DE, FR, KZ, LT, NL, RO, RU, SK, SI, CH, PL, UK, IE

John Deere Xtranet 3600m (high UV formulation) 123 cm 3.600 m 40 kg 28 ES, IT, GR, HU

John Deere Xtranet 4200m 123 cm 4.200 m 42 kg 28 DK, FI, NO, SE, AT, BA, CZ, EE, DE, FR, GR, HU, KZ, LT, NL, RO, RU, SK, SI, CH, PL, UK, IE

John Deere Xtranet 4200m (high UV formulation) 123 cm 4.200 m 42 kg 28 ES, IT

184 |

John Deere Twine

XtraTwine

– Renowned for its strength and performance

– Suitable for use in all makes of large square baler

– Easy feed system – Quality assurance

Crop Packaging

Crop Packaging

Item DescriptionPackaging

UnitPackage length

Pallet Qty Classification Colour Country availability

John Deere HD Twine Roll 1180 80 Premium White DK, FI, NO, SE, ES, AT, BA, CZ, EE, DE, HU, LT, NL, RO, SK, SI, PL, UK, FR

John Deere Big Bale PP Twine 130 Pack 2070 56 Generic Rust ES, HU

John Deere Big Bale PP Twine 130 Roll 1035 112 Generic Rust PL

John Deere Big Bale PP Twine 130 Pack 2070 56 Generic White DK, FI, NO, SE, AT, BA, CZ, EE, DE, GR, HU, KZ, LT, NL, RO, RU, SK, SI, FR

John Deere Big Spool 130 Roll 1260 80 Generic Rust UK

John Deere Big Spool 130 Roll 1260 80 Generic White DK, FI, NO, SE, AT, BA, CZ, EE, DE, LT, NL, RO, SK, SI, FR

John Deere Big Bale PP Twine 7200 Pack 7200 feet 56 Generic Rust UK

John Deere Big Bale PP Twine 150 p Pack 2340 56 Generic White ES, GR, FR

John Deere Standard PP Twine 350 Pack 2860 80 Generic Blue GR

John Deere Standard PP Twine 400 Pack 3500 80 Generic Blue DK, FI, NO, SE, AT, BA, CZ, EE, DE, GR, HU, KZ, LT, NL, RO, RU, SK, SI

John Deere Standard PP Twine 500 PL p Roll 2000 240 Premium White PL

John Deere Round Bale PP Twine 750 Pack 5800 80 Generic Blue ES, GR, KZ, RU

John Deere Twine 1000 Pack 8280 80 Generic Blue HU

John Deere Premium Twine 750+ Pack 5800 96 Premium White AT, BA, CZ, EE, DE, GR, LT, NL, RO, RU, SK, SI, FR

John Deere Premium Twine 870+ Pack 7100 96 Premium White FR

John Deere Premium Twine 1000+ Pack 8300 96 Premium White HU, FR

John Deere Twine 300 Pack 2690 80 Generic Black ES

185|

John Deere Stretchwrap

XtraFilm

– 3-layer film for the greatest strength when bale wrapping.

– Better cling. – UV protection. – Puncture and tear resistance

Crop Packaging

Crop Packaging

roun

d ba

les/

roll

4 la

yers

- 5

5% st

retc

h

roun

d ba

les/

roll

4 la

yers

- 7

0% st

retc

h

roun

d ba

les/

roll

6 la

yers

- 5

5% st

retc

h

roun

d ba

les/

roll

6 la

yers

- 7

0% st

retc

h

Item Description Size Colour Nb of turn Country availability

John Deere 500 x 1800 black Stretchfilm 500 Black 24 26 16 17 ES

John Deere 500 x 1800 Green Stretchfilm 500 Green 24 26 16 17 ES, AT, BA, CZ, EE, DE, LT, NL, RO, SK, PL

John Deere 500 x 1800 White Stretchfilm 500 White 24 26 16 17 DK, NO, SE, ES, AT, BA, CZ, EE, DE, LT, NL, RO, SK, SI, PL

John Deere 750 x 1500 Black Stretchwrap 750 Black 30 33 20 22 ES, UK, FR

John Deere 750 x 1500 Green Stretchfilm 750 Green 30 33 20 22 ES, AT, BA, CZ, EE, DE, HU, LT, NL, RO, RU, SK, SI, PL, UK, FR

John Deere 750 x 1500 Green Stretchfilm HUV 750 Green 30 33 20 22 GR

John Deere 750 x 1500 White Stretchfilm 750 White 30 33 20 22 DK, NO, SE, ES, AT, BA, CZ, EE, DE, HU, LT, NL, RO, RU, SK, SI, PL, FR

John Deere 750 x 1500 White Stretchfilm HUV 750 White 30 33 20 22 GR

John Deere 750 x 1650 Black Stretchfilm 750 Black 33 36 22 24 UK, FR

John Deere 750 x 1650 Green Stretchfilm 750 Green 33 36 22 24 AT, BA, CZ, EE, DE, HU, LT, NL, RO, RU, SK, SI, PL, FR

John Deere 750 x 1650 White Stretchfilm 750 White 33 36 22 24 SE, AT, BA, CZ, EE, DE, HU, LT, NL, RO, RU, SK, SI, PL, FR

186 |

Knife sharpening tool for round balers and forage wagons (Products available in JDPoint through TS programme B2)

Knife sharpening tool for round balers and forage wagons

Sharpness plays a critical role in the performance of many harvesting machines. This is required to maintain maximum cutting performance.

The John Deere knife sharpener is for use on the pre-cutter knives on round balers or forage wagons. The key advantage of this tool is the ability to grind with a constant angle, especially for the curved pre-cutter blades found on round balers and forage wagons.

187|Knife sharpening tool for round balers and forage wagons

188 |



One tool with many advantages ■ Allows to grind with a constant angle ■ Easy to transport for use on site ■ Solution tailored for contractors or intensive baler users

Sharp knives will reduce fuel consumption and reduce the load on the drive line of your machine. Research at Harper Adams University College has revealed fuel savings of 10% for a round baler using sharp knives compared to blunt knives. In addition the torque load on drive lines was reduced by up to 30%, meaning a lot less wear on drive chains.

Rotation stopsThe motor and grinding head swing through an arc to sharpen the knife. To prevent grinding over the edge two rotation stops limit the travel of the grinding stone. The machine is easily adjusted to suit other makes of knife.

Curved knives for all brands of balers and self loading forage wagons can be sharpened effortlessly with the John Deere knife sharpener.

Knives can be optimally positioned simply by relocating the stop screws.

In order to be able to clamp the knife securely the horizontal clamp can be adjusted in height and length.

Grinding AngleFor maximum efficiency John Deere round baler knives should be ground to 12º. The grinding machine is fitted with a measuring dial to help you easily monitor the grinding process and find the exact grinding angle.

Cutting angle adjustment is easily done thanks to two side handles to modify grinding stone inclination.

189|

Item Description Part number

Knife sharpener 240V MC201035

Knife sharpener 440V, 3 phase MC201033

Knife sharpener 240V – UK version MC201035UK

Knife sharpener 440V, 3 phase – UK version MC201033UK

Replacement grinding wheel - white (standard) MC1400149

Replacement grinding wheel - blue (fine) MC1400150

Replacement electric motor 240V MC8700050

Replacement electric motor 440V, 3 phase MC8700084

Power: 1.1kw

Frequency: 50HZ

RPM: 2750 rpm

Degree of protection: IP54

Main Dimensions:

Length: 88.0cmHeight: 143.5cm Width: 66.5cmWeight: 85.0kg



Specifications

Two versions are available – 240V or 440V, 3 phase. Otherwise the technical specifications are identical:

190 |

Products available in JDPoint through TS programme AE

191|

John Deere Paints (Products available in JDPoint through TS programme AE)

John Deere Paints

John Deere aerosol and can paints are made to the original formula used in the John Deere factory. They perfectly match John Deere green and yellow colours and are ideally suited to repair your John Deere machines and paint related mounted parts.

John Deere Paints ensure:- Very high gloss

- Weather resistance

- Long term flexibility

- Excellent drying

192 |

John Deere Paints – Tested to be the best

A fresh coat of paint not only keeps your equipment looking good, it offers protection from humidity, corrosion, chemicals, UV rays and scratches.

We have rigorously tested our aerosol and can paints to make sure they give you a better colour match, a great finish and stronger resistance to chemicals.

So it makes sense to buy genuine John Deere supplies to keep your machines at their peak.

The criteria tests are relevant to ensure durability, resistance and appearance for your repair or repaint work.


193|

John

Dee

re M

aste

rJo

hn D

eere

Mas

ter

John

Dee

re M

aste

rJo

hn D

eere

Mas

ter

John

Dee

re M

aste

rJo

hn D

eere

Mas

ter


Colour matchVisual comparison provides a colour match between the test panels and the original or existing John Deere colour. Genuine paint not only matches the original John Deere Green and Yellow perfectly, it also keeps it’s their optimal brilliance throughout the tests, whilst competitive products deviate considerably in colour and appear dull.

Genuine Non Genuine I Non Genuine II


194 |

0-1.0 1.0-2.0 2.0-3.0 3.0-4.0 4.0-5.0 5.0-5.5 5.5

0

-1.0

1.0

-2.0

2.0

-3.0

3.0

-4.0

4.0

-5.0

5.0

-5.5

5.5

0-1.0 1.0-2.0 2.0-3.0 3.0-4.0 4.0-5.0 5.0-5.5 5.5

0

-1.0

1.0

-2.0

2.0

-3.0

3.0

-4.0

4.0

-5.0

5.0

-5.5

5.5

0-1.0 1.0-2.0 2.0-3.0 3.0-4.0 4.0-5.0 5.0-5.5 5.5

0

-1.0

1.0

-2.0

2.0

-3.0

3.0

-4.0

4.0

-5.0

5.0

-5.5

5.5

0-1.0 1.0-2.0 2.0-3.0 3.0-4.0 4.0-5.0 5.0-5.5 5.5

0

-1.0

1.0

-2.0

2.0

-3.0

3.0

-4.0

4.0

-5.0

5.0

-5.5

5.5


Colour shade measurement Colour shade deviations are measured according to John Deere and industry standards by means of colorimeters.Compared to the John Deere standard panel, the measured values must be within a given deviation range.According to John Deere Guidelines, deviations from the standard can only be ≤ 1.0 point.


Green aerosol paint

Green can paint

Yellow aerosol paint

Yellow can paint

Allowed deviation Geniune paint Non Geniune I Non Geniune II

Yellow+ +Db*

Red–

-Da*

Gree

n+ -

Da*

Red–

-Da*

Red–

-Da*

Red+

+Da

*Gr

een–

+Da

*

Red+

+Da

*Re

d+ +

Da*

Yellow+ +Db*

Yellow+ +Db*Yellow+ +Db*

-Db* Yellow– -Db* Yellow–

-Db* Yellow–-Db* Yellow–

195|


Testing procedure 1. Application of 10 drops of the corresponding media to the painted panels

2. Leave in 6 min

3. Wipe the media away with a cloth

4. Visual assessment of the eventual modifications on the test panels

Conclusions The Non Genuine paints do not have sufficient chemical resistance to withstand the daily strains. Complete dissolution of the paint is possible in case of contact with chemicals, diesel or gasoline.

Genuine Non Genuine I Non Genuine II


Genuine John Deere Non Genuine I Non Genuine II

Diesel Gasoline Diesel Gasoline Diesel Gasoline

Green can paint 1 1 1 3 1 4

Yellow can paint 1 1 1 3 1 4

Green aerosol paint 1 1 1 5 3 3

Yellow aerosol paint 1 1 1 5 4 3

Chemical resistanceThe chemical resistance of paint is directly related to the longevity of the paintwork. In daily use, paints may be exposed to various strains by aggressive substances (cleaning agents, oils, gasoline, etc.). A lower chemical resistance may result in damage, for example etching of the paint or dissolution of the coating. In addition to the loss of the high-quality optical appearance of the finish, the protective effect of the paintwork is also lost.

The chemical resistance is classified as follows:

1 – no modification to the coating

2 – modifications of the gloss level or colour shade

3 – formation of blisters

4 – etching of the coating

5 – dissolution of the coating

Gaso

line

Gaso

line

Gaso

line

Dies

el

Dies

el

Dies

el

196 |


John Deere Paints

Processing with paint spray cans / aerosols

Visible defects occurring in the paint film require repairing by means of aerosol paints if they cannot be removed by light grinding and polishing of the damaged area. Depending on the location (exposed or not exposed/subsequent) different products should be used.

For the following repairing steps, surface and structure of the damage are very important. Applying primer is only mandatory if the part to be repaired is made of metal or if the coating has been damaged or grinded down deep into the underground.

Possible damage structures

Underground Plastic Plastic Metal Metal

Present coating Not ground through Ground through Not ground through Ground through

Primer Not required sole discretion sole discretion Required

Top coat Required Required Required Required

Dam

ages

onl

y in

th

e to

p co

at

Measure Explanation

GrindingIn the first step the damaged area should be ground smoothly with sand paper type 1,000 or 1,200 (until the damage is no longer visible). In the second step polish the coating by using polish paste.

If the primer layer has been damaged by the grinding or, if the top coat cannot be polished due to too thin paint layer, the complete surface has to be ground again and painted with top coat.

Polishing

Grinding

Applying top coat

Dam

age

of p

rim

er

Measure Explanation

GrindingIf the scratch / the damage is so deep that it reaches the primer layer, grind by means of sand paper type 1,000 as long as the damage is no longer visible. After that apply the top coat according to the operation instructions.

Should the grinding have reached the substrate apply primer according to the operation instructions before spraying the top coat.

Polishing

Grinding

Applying top coat

Dam

age

of su

bstr

ate

/ ob

ject

Measure Explanation

Grinding Repairing damages which reach deep into the substrate require the application of filler. As preparation the object has to be ground up to the substrate. Ask for a suitable filler for the base material in a specialist shop.

Application and hard-drying as specified in the manual.

After that grind with sand paper type 1,000 until a smooth and plain surface is reached.

Now filler and top coat can be applied by means of the aerosol paint spray cans in accordance to the operation instructions.

Polishing

Grinding

Applying top coat

Dam

ages

cau

sed

by

corr

osio

n

Measure Explanation

GrindingTo repair small or minor corrosion damage, grind the object so that neither rust nor dyeing are visible.

In special cases the application of filler on the damaged area may be required.

Proceed as specified under chapter “damage of substrate / object”.

In case of large-scale corrosion we recommend to consult a specialist.

Polishing

Grinding

Applying top coat

197|


John Deere Paints

General remarks to processing

Grin

ding

Why?Grinding of the old paint surface to improve paint gradient and adhesion;

Removing of scratches or other defects in the coating.

How?

Constantly and with rotary movement until the defect is eliminated and / or the surface of the old coating has been removed (gloss).Dry-grinding should be preferred over wet grinding, as moisture can interfere later.Remove the abrasive dust thoroughly with an anti-static cloth.

Auxiliary material

Finely granulated sand paper (type 1,000 or finer if available).For larger areas the use of an electric grinder can be helpful.Nevertheless grinding by hand should be preferred (homogenous abrasion).Anti static cloths to remove the abrasive dust are available in specialist stores.

Polis

hing

Why? To eliminate minor top coat defects without new top coat application.

How?

Apply polish paste on the smoothed top coat.Work it in with constant rotary movements using a cotton cloth or electric polisher. Dependent on the operation instructions, allow the paste to dry or remove it in wet condition.Polish the treated area carefully with a cotton cloth.

Auxiliary material Polish pastes, polish cloth and electric polishers are available in specialist stores.Please pay attention to the operation instructions for the polish pastes.

Appl

ying

fille

r

Why?To equalize defects inside the object itself (e.g. scratches or small dints) by applying appropriate filler.Such defects cannot be equalized by using primer only.

How? Please follow the operation instructions for the individual filler.The filler must match the present substrate.

Auxiliary material Filler and scrapers are available in specialist stores.

198 |

Preparation for spray can painting (Aerosol paints)

1. Masking

■ Use masking tape on edges and crevices etc. around the area which needs to be painted, to prevent visible differences.

■ Protect surrounding areas with high-quality tape and paper.

■ Wait until the new applied coating has dried before removing masking.

■ Before starting the painting clean the object again with a suitable silicone remover and/or an anti-static cloth.

2. Sanding down the old coating in all areas to be painted (until all gloss is removed).

3. General conditions for the processing

■ Pay attention to the safety instructions (see label on the spray can)

■ Processing only in good ventilated, dust-free and dry rooms

■ No processing at temperatures below 15°C (ambient temperature and temperature of the spray can)

■ Absolutely avoid temperatures above 40°C

■ If the substrate is not known, use a non visible area to test the adhesion.

■ It is recommended that you check the top coat colour match with the existing old top coat before starting the painting process


John Deere Paints

Possible contaminations and faults Elimination

Moisture Dry the substrate with a lint-free cloth

Corrosion Remove corrosion (sanding/grinding)

Oil, grease, dirt/soil Use cotton cloth and commercially available cleaning agent to rub it off

199|


John Deere Paints

Application of the primer by means of spray cans

Shake spray can well for at least 2 minutes (counted from the first hearable strike on)

Spray in the beginning (2 – 3 seconds) next to the object when using the spray can for the first time.

Conduct a paint trial on a piece of cardboard or metal if the spray can is used for the very first time.

Start the primer application beneath the object by oscillating uniformly

[1 spray pass = 1 x down and up again]

Approximately 15 – 20 cm distance between spray nozzle and object

Painting speed approx. 10 cm/sec.

Flash off time approx. 1 minute; finish painting the object as described in section undercoating (1 – 2 further spray passes).

Afterwards a uniform coating should be visible on the object

Drying:

Pure air drying at ambient temperature (store parts protected against dust).

Surface-dry after approximately 10 min

Touch-dry after approximately 30 min

Resilient after approximately 8 h

Accelerated drying possible after 10 minutes flash off time

The primer can be over-coated with 1K John Deere aerosol paints already 15 to 20 minutes after flash off time

Cross-linked primer should be sanded before applying the top coat

The dry-layer thickness should be at least 30 µm

End of work:

After having finished the painting turn the spray can upside down and empty the spray nozzle. Clean the spray nozzle with cleaning thinner.

200 |


John Deere Paints

Application of top coat by means of spray cans

Shake spray can well for at least 2 minutes (counted from the first hearable strike on)

Spray in the beginning (2 – 3 seconds) next to the object when using the spray can for the first time.

Conduct a paint trial on a piece of cardboard or metal if the spray can is used for the very first time.

Start the primer application beneath the object by oscillating uniformly

[1 spray pass = 1 x down and up again]

Approximately 20 – 25 cm distance between spray nozzle and object

Painting speed approx. 10 cm/sec.

Flash off time approx. 2 to 3 minutes; finish painting the object as described in section undercoating (1 – 2 further spray passes).

Afterwards a uniform coating should be visible on the object

Drying:

Pure air drying at ambient temperature (store parts protected against dust).

Surface-dry after approximately 20 min

Touch-dry after approximately 3 h

Resilient after approximately 24 h

Accelerated drying possible after 15 minutes flash off time

(30 min. at 80°C)

The dry-layer thickness should be at least 30 to 40 µm

End of work:

After having finished the painting turn the spray can upside down and empty the spray nozzle. Clean the spray nozzle with cleaning thinner.

201|


John Deere Paints

Preparation and application of the primer (can)

PRODUCT PROFILE High corrosion resistant primer with excellent drying properties.

Ideal to repair agricultural machines and corresponding accessories.

PROCESSING

Suitable substrates: Steel, cast iron and non ferrous metals (check adhesion before painting).

Pre Treatment: If required, old coating must be sanded with abrasive paper (P240-P320).

Areas that should not to be treated must be masked off generously.

Before applying the paint, the object must be free of fat, rust, moisture, oil and dirt.

Preparation:

Stir paint container vigorously 1 – 2 min with an appropriate stirring stick in order to get a well mixed homogenous material.

Application: Apply with suitable brush or with a roller. Apply a uniform coating film.

Drying time: Dust dry:

Dry to touch:

Resilient (paintable):

Completely dry:

After approx. 30 min

After 1 – 2 h

After 24 – 48 h

After 7 days

The given drying times are based on a dry film thickness of approx. 30 – 40 µm at room temperature (20 – 23°C) and may vary therefore.

Coverage:

25 m2/L

The coverage depends on the shape of the object and the type of coating.

The theoretical yield at a dry film thickness of 35 µm is 8,7 qm/kg

Painting: Before applying a top paint, the applied primer must be dried over night.

It is recommended to sand the completely dry primer before applying the top coat.

202 |


John Deere Paints

Work finish: After the coating process, seal the container air tight.

Clean working equipment properly.

Shelf life: Unopened cans be stored 12 months

Avoid high temperature variations

Disposal: Only dispose of completely emptied containers. Please pay attention to the relevant regulations.

ADDITIONAL REMARKS■ This primer can also be applied by spraying■ For spray application primer must be adjusted by adding approx. 5% solvent

Preparation and application of the top coat by means of can paint

PRODUCT PROFILE High quality air drying top coat with very good drying, high brilliance, excellent gloss retention and high resistance.

Ideally suited to repair agricultural machines and corresponding accessories.

PROCESSING

Suitable substrates: Primed or filled surfaces as well as top coats (check adhesion before painting)

Pre Treatment: If required, old coating must be sanded with abrasive paper (P600).

Areas that should not to be treated must be masked off generously.

If the metal substrate is damaged, it is recommended to apply a primer first

Before applying the paint, the object must be free of fat, rust, moisture, oil and dirt.

Preparation: Stir paint container vigorously 1 – 2 min with an appropriate stirring stick in order to get a well mixed homogenous material.

Coating test for colour matching at a non-visible position or on a separate substrate piece.

Please note that after drying the paint colour can change. Leave to dry over-night.

203|


John Deere Paints

Application: Apply with suitable brush or with a roller. Apply a uniform coating film.

Drying time: Dust dry:

Dry to touch:

Resilient (paintable):

Completely dry:

After 30 – 45 min

After 4 – 5 h

After ca. 48 h

After 7 days

The given drying times are based on a dry film thickness of approx. 30 – 40 µm at room temperature (20 – 23°C) and may therefore vary.

Coverage:

25 m2/L

The coverage depends on the shape of the object and the type of coating.

The theoretical yield at a dry film thickness of 35 µm is 11,2 qm/kg

Reworking: If required, polish after hardening with a commercial polishing paste.

Work finish: After the coating process, seal the container air tight.

Clean working equipment properly.

Shelf life: Unopened container can be stored 12 months

Avoid high temperature variations

Disposal: Only dispose of completely emptied containers. Please pay attention to the relevant regulations.

ADDITIONAL REMARKS■ This primer can also be applied by spraying■ For spray application primer must be adjusted by adding approx. 5% solvent

204 |

Aerosols Paints (Products available in JDPoint through TS programme AE)

John Deere Online Data Base for Safety Data Sheets (MSDS): http://www.jdmsds.com

Aerosols Paints

Green Spray Paint, 400ML

Black Spray Paint 400ML, Semi-gloss

Handgrip

Yellow Spray Paint 400ML

Primer Beige, SPRAY, 400ML

Colour: John Deere GreenSize: 400ML aerosol

Package quantity: 6

Part number: MCF100

Colour: BlackSize: 400ML aerosol

Package quantity: 6

Part number: MCF102

Plastic handgrip, designed for John Deere aerosols.


Part number: MCF120

Colour: John Deere YellowSize: 400ML aerosol

Package quantity: 6

Part number: MCF101

High corrosion resistant primer with excellent drying properties.

Package quantity: 6

Part number: MCF110

Industrial Yellow Sprain Paint, 400ML Industrial Charcoal Sprain Paint, 400ML

Color: Industrial YellowSize: 400ML, aerosol

Package quantity: 6

Part number: MCF103

Color: Industrial CharcoalSize: 400ML, aerosol

Package quantity: 6

Part number: MCF104

205|

Can Paints (Products available in JDPoint through TS programme AE)


Can Paints

Green Paint, 1L can

Yellow Paint, 1L can

Black Paint, 1 L can Primer Beige, 1L can

Green Paint, 2.5L can

Yellow Paint, 2.5L can

Thinner, 1L can Thinner, 5L can

Colour: John Deere GreenSize: 1L can

Package quantity: 6

Part number: MCF1301

Colour: John Deere YellowSize: 1L can

Package quantity: 6


Colour: BlackSize: 1L can

Package quantity: 6


High corrosion resistant primer with excellent drying properties.

Package quantity: 6


Colour: John Deere GreenSize: 2.5L can

Package quantity: 4


Colour: John Deere YellowSize: 2.5L can

Package quantity: 4


Premium quality, medium-volatile solvent mixture.Application: thinning of John Deere top-coat paints, cleaning of equipment, pretreatment of surfaces to be painted.

Package quantity: 6


Premium quality, medium-volatile solvent mixture.Application: thinning of John Deere top-coat paints, cleaning of equipment, pretreatment of surfaces to be painted.

Package quantity: 6


206 |

Can Paints (Products available in JDPoint through TS programme AE)


Can Paints

Industrial Yellow, 1L can

Medium Gloss Black, 1L can

Goldoni Green, 1L can

Industrial Charcoal, 1L can

Marine White, 1L can

Graphic Grey, 1L can

Colour: Industrial Yellow Size: 1L can

Package Quantity: 6


Colour: Medium Gloss Black Size: 1L can

Package Quantity: 6


Colour: Goldoni Green Size: 1L can

Package Quantity: 6


Colour: Industrial Charcoal Size: 1L can

Package Quantity: 6


Colour: Marine White Size: 1L can

Package Quantity: 6


Colour: Graphic Grey Size: 1L can

Package Quantity: 6


207|

Chemicals (Products available in JDPoint through TS programme AE)


Aerosols

Starting Fluid

Chain & Cable Lubricant

Penetrating Oil Electrical Contact Cleaner

Silicone Lubricant

Brake & Parts Cleaner

HiTech Lube

Glass Cleaner Multi-Purpose Cleaner

Clean & Shine

Ensures immediate starting of petrol and diesel engines. Reduces drain on battery. Ensures perfect combustion and operation in all weather conditions. Treats and solves problems of difficult starting caused by water and humidity. Aerosol packaged with extension tube for areas difficult to reach.


Part Number: MCB001

Penetrating spray designed for the lubrication and protection of all types of chains. Penetrates into the chains and all mechanisms for the best possible lubrication. Reduces friction and wear. Repels water, prevents corrosion and rust. Non-sticky adhesive lubricant. Long lasting and protective lubricant. Aerosol packaged with extension tube for areas difficult to reach.Package quantity: 6Part Number: MCB003

Penetrates, lubricates, and repels moisture. Protects against rust and corrosion. Ideal to release rusted and frozen nuts, bolts, screws, pipes, motors and machine parts. Aerosol packaged with extension tube for areas difficult to reach.

Package quantity: 6

Part Number: MCB005

Cleans, renovates, polishes intensively the vehicle body and protects against external attacks. Contains carnauba vegetal wax.

Package quantity: 6

Part Number: MCB010

Protects and keeps rubber, dashboard, upholstery doors and draught excluders in good conditions. Protects against moisture. Non greasy penetrating lubricant. Lubricates door locks, trunk lids, brake cables and rubber moulding. Aerosol packaged with extension tube for areas difficult to reach.

Package quantity: 6

Part Number: MCB011

Brake and parts cleaner is an oil-free spray that instantly removes brake dust, grease and dirt from brake parts. Flushes oil, dirt and carbon from electrical engines. Leaves no residue. Universal and powerful aerosol for a quick cleaning and degreasing of small structural components in vehicle engines or mechanical equipment.


Part Number: MCB008

High pressure lubricant offering high adhesive performance. Protects and stops squealing noises. Lubricates under the most severe pressure. Penetrates inaccessible parts. Protects against water, moisture, salt, acids, dirt, dust. Aerosol packaged with extension tube for areas difficult to reach.

Package quantity: 6

Part Number: MCB004

Cleans windows and windshields of all vehicles. Removes dirt, insects, road film, smoke residues. Formulated from vegetal origin alcohol.

Package quantity: 6

Part Number: MCB006

Cleans, degreases and leaves the surface shiny without leaving any marks. Can be used on any type of surface (plastics, paintwork, chrome, engine compartment, fabric, carpets). Formulated from natural origin materials.

Package quantity: 6

Part Number: MCB007

Quick dry cleaner that removes dirt, oil, and grease from sensitive equipment and precision instruments without leaving any residue. This formulation is compatible with component plastics and painted surfaces if overspray occurs. Aerosol packaged with extension tube for hard to reach areas.

Package quantity: 6

Part Number: MCB009

208 |



Chemicals

Fuel-Protect Additive 1L

Corrosion Protect, 20L

Petrol Stabilizer, 250 mlDiesel Exhaust Fluid, 10 Litres

Diesel Fuel Cleanup, 1.9L

Keep Clean Fuel Additive, 20L

John Deere Fuel-Protect Keep Clean solution for diesel injectors is a maintenance additive to be used over the life of the engine.Recommended for extending the benefits ofthe Flush Tool and Clean-Up service.


Part number: MCTY26827

High performance corrosion protection wax. It produces a thick, touch resistant film. It‘s ideal for the long term preservation and corrosion protection of farm and lawn equipment.Pack Qty: 1

Part Number: MCYU1020-020

Maintains engine performance, makes cold start easier and extends petrol life up to 24 months. 10ml treats 10 litres of petrol. Pack Qty: 12

Part Number: MCTY27535

Diesel Exhaust Fluid (DEF) is also commonly called urea or Adblue®. Diesel Exhaust Fluid is a high purity liquid injected into the exhaust system of selective catalytic reduction (SCR) engines. ISO Standard 22241. Pack Qty: 2

Part Number: MC600100001

Fuel injector clean-up product to remove fuel system deposits and restore engine performance. To be used with the Fuel Injector Flush Tool (SW10015JD)

Package quantity: 6


John Deere Fuel-Protect Keep Clean solution for diesel injectors is a maintenance additive to be used over the life of the engine.Recommended for extending the benefits of the Flush Tool and Clean-Up service.


Corrosion Protect, aerosol, 400ML

High performance corrosion protection wax. It produces a thick, touch resistant film. It‘s ideal for the long term preservation and corrosion protection of farm and lawn equipment.Pack Qty: 6

Part Number: MCYU1020-004

Brake Fluid, DOT4

Provides optimal braking response. Is suitable for all types of vehicles. Is stable in varying climates, from very cold to very hot. Can be mixed with all DOT4 brake fluids. Product meeting ISO 4925 Class 4 SAE J1704 – FMVSS 116 – UNE 26-109 88 standards.


Part Number: MCB002

209|



Chemicals

Fuel Conditioner, Winter formula 20 LFuel Conditioner, Winter formula 1 L

Fuel conditioner for Diesel and Biodiesel fuels up to B20. Cleans and maintains fuel systems for optimal power and fuel economy. Winter formula offers lower cold filter plugging point, lubricity improver, water control, fuel stabilizers, and increased Cetane Number for faster, smoother starting.Pack Qty: 1


Fuel conditioner for Diesel and Biodiesel fuels up to B20. Cleans and maintains fuel systems for optimal power and fuel economy. Winter formula offers lower cold filter plugging point, lubricity improver, water control, fuel stabilizers, and increased Cetane Number for faster, smoother starting.Pack Qty: 12


Fuel Conditioner, Summer formula 20 LFuel Conditioner, Summer formula 1 L

Fuel conditioner for Diesel and Biodiesel fuels up to B20. Cleans and maintains fuel systems for optimal power and fuel economy. Summer formula offers lubricity improver, water control, fuel stabilizers, and increased Cetane Number for faster, smoother starting.Pack Qty: 1


Fuel conditioner for Diesel and Biodiesel fuels up to B20. Cleans and maintains fuel systems for optimal power and fuel economy. Summer formula offers lubricity improver, water control, fuel stabilizers, and increased Cetane Number for faster, smoother starting.Pack Qty: 12


212 |

John Deere Grease guns & Accessories

Lube-Shuttle® grease guns with Lube-Shuttle®-screw cartridges

It’s Clean & Easy: ■ Unscrew the cartridge cap, screw in Lube-Shuttle®-cartridge, ready!

It’s Economical & Ecological: ■ permanent monitoring of grease type and level ■ optimal emptying, clean, environmentally friendly ■ no air trapped through a closed system, no venting required ■ Empty cartridges refillable with refill adapter and filler pumps

John Deere offers a complete product line of grease guns for standard pull-off cartridges (DIN1284) and Lube-Shuttle® screw cartridges: from side-lever grease guns, one hand grease guns, to battery operated grease guns and air-operated grease guns.

Tips to operate grease guns

■ No wear parts in the high pressure area A high precision fit between cylinder and piston provides reliable sealing of the high pressure area, avoiding the use of wearing parts. An O-ring wiper seal ensures cleanliness inside and out. The pressurised grease is prevented from getting back into the grease reservoir by a non-return ball valve.

■ It all depends on a good connectionGrease fittings must be gripped firmly and without leakage at high pressures. Either a coupler works or not. John Deere offers a 4-jaw hydraulic coupler as standard. And even this is not enough: The critical component is a hardened steel turned part. John Deere doesn’t go for any cheap compromises! Tight grip – connection success!

■ Safety instructionsAlways treat hoses carefully. Do not bend or twist hoses by force ! The min. bend radius is 50 mm. Prior to use, check hoses carefully for traces of wear or leakage and replace items in case they appear damaged. Both nylon and rubber hoses are subject to the effects of ageing, replace hoses after a period of three years. Do Never use pliers or pipe grips in the area of the end fitting, use spanners or wrenches of the correct size on the hexagonal end fittings only.

Use only original accessories from John Deere to avoid unnecessary risks or injuries!

John Deere Grease guns & Accessories

213|

Grease guns (Products available in JDPoint through TS programme MA and TS AE starting February 2015)

Manual Grease Gun, John Deere

Li-Ion AccuLuber grease gun kit for Lube-Shuttle grease cartridges

Manual Grease Gun LUBE-SHUTTLE John Deere

Battery Charger 230V for Li-Ion battery

Spare Battery for Li-Ion AccuLuber

One hand Grease Gun, John Deere

Li-Ion AccuLuber grease gun kit for standard grease cartridges

Lube-Shuttle TG pistol grip grease gun John Deere

Battery Charger 12V-24V for Li-Ion battery

■ With rigid tube and 4-jaw hydraulic connector ■ Short stroke action ■ Permanent-spring-load-system ■ Metered delivery ■ Combined filler nipple/air release valve (for use with filler pumps)

■ Ergonomic hand grip ■ TÜV, DLG,BLT approved, to DIN 1283 ■ For 400g cartridges or 500g bulk fill

Part number: MC3042134

Electric battery operated grease gun, 14.4V Ni-Cd, 3000mAh. A powerful DC motor drive gives up to 400 bar of grease pressure. The maximum pressure is limited by an inbuilt relief valve.With LubeShuttle, simply remove the cartridge cap, insert into the zinc plated steel body, screw in and you are ready to go! Double performance compared to Ni-Cad battery operated AccuLuber.Pack Content: 1Pack Qty: 1

Part Number: MC3427207 (UK: MC3427214)

For 400g LUBE-SHUTTLE grease cartridges.Connecting thread M10x1mm with 300mm high pressure rubber hose (burst pressure 1.650bar) and high quality 4-jaw coupler.


3.000 mAh, ON/OFF LED-Monitoring Lamp, Fast Charge Function, 2m Cable, for Li-Ion spare batteryPack Content: 1Pack Qty: 1


Powerful Li-Ion-Battery 14.4 DC / 3.000mAh, with double power as compared to Ni-Cd version. Must be charged only with Li-Ion Charger.Charging time: 1,5 hour approxPack Content: 1Pack Qty: 1


With 300mm high pressure nylon hose PH-30CNew ergonomically engineered heavy-duty-design. Rigid delivery tube can be fitted either horizontally or vertically ensuring optimal access to reach even difficult lubrication points. Combined filler nipple/air release valve (for use with filler pumps). Pressure capability approx. 330 bar. Zinc plated, packed in carton.


Electric battery operated grease gun, 14.4V Ni-Cd, 3000mAh. A powerful DC motor drive gives up to 400 bar of grease pressure. The maximum pressure is limited by an inbuilt relief valve. Double performance compared to Ni-Cad battery operated AccuLuber.Pack Content: 1Pack Qty: 1


One hand grease gun with zinc plated steel barrel for Lube-Shuttle System grease cartridges.Ergonomically designed pistol grip.


3.000 mAh, ON/OFF LED-Monitoring Lamp, Fast Charge Function, 2m Cable, for Li-Ion spare batteryPack Content: 1Pack Qty: 1


214 |

AccuLuber grease gun kit for Lube-Shuttle grease cartridges, John Deere

Spare Battery for AccuLuber 14.4

Robust electric 14.4V Ni-Cd Battery Operated Grease Gun for Lube-Shuttle – System-Cartridges. (1 battery, 1 charger, 750mm high pressure hose with coupler incl.) Simply remove the cartridge closure, insert into the zinc plated steel body, screw in and you are ready to go!

Part number: MC3425401 (UK: MC3425418)

High Power Ni-Cd battery 14.4V DC, 1.500 mAh.


AccuLuber grease gun kit for standard grease cartridges, John Deere

14.4V Ni-Cd battery, 1.500mAh, Delivery: 100cc per min. approxElectronically controlled fast charger with overload protection (1 battery, 1 charger, 750mm high pressure hose with coupler incl.).


Battery Charger with Overload Protection 14.4 DC Battery Charger with Overload Protection 14.4 DC,12V – 24C DC

1.500 mA, ON/OFF LED-monitoring lamp, 1 hour fast charge function, 2 m Cable.


1.500 mA, ON/OFF LED-monitoring lamp, 1 hour fast charge function, 2m Cable.


Grease guns (Products available in JDPoint through TS programme MA and TS AE starting February 2015)

Grease guns

High Pressure Extra Safe Rubber Hose Ø13mm

High Pressure Rubber Hose for Acculuber 14.4

4-Jaw Hydraulic Connector

PH-30C with 4-jaw hydraulic connector (hardened jaws) M10x1, Length: 300mm, Burst pressure: 1.650 bar.


Hose Ø13mm, hexagonal end fittings for positive and safe installation. Burst pressure 1.650 bar (double steel wire braided), with 4-jaw hydraulic connector.


DIN 1283, heavy duty quality for grease fittings DIN 71412, with hardened jaws for optimal sealing, hexagon 15mm.



Lube-Shuttle Cartridge refill Adaptor

Lube-Shuttle Cartridge Refill adaptor for use with ecoFILL filler pumps, with threaded adaptor and 5 screw caps, for sealing cartridges after refilling.


215|

Grease Gun Filler Pump JD, for 18kg grease pails

Pneumatic High Pressure Grease Pump JD, stationary, for JD 50 kg grease kegs

With filler pump, suction tube Ø 40 mm, follower plate and self-centering keg lid. Efficient and professional method for filling grease guns and Lube-Shuttle®-cartridges (through Refill-Adapter MC3115050)

Part number: MC3381769 (DE, IT: MC3381752)

incl. high pressure pump. Pressure ratio 1:55, free delivery 500 g/min, max. working pressure 425 bar (6.150 psi), grease connection 1/4", suction tube Ø 40 mm. 3.5m high pressure grease hose, follower plate and self-centering keg lid.

Part number: MC3411060 (DE, IT MC3411053)

Grease Gun Filler Pump JD, for 50kg grease kegs

Pneumatic High Pressure Grease Pump JD, mobile, for JD 18 kg grease pails

Pneumatic High Pressure Grease Pump JD, stationary, for JD 18 kg grease pails

Pneumatic High Pressure Grease Pump JD, mobile, for JD 50 kg grease kegs

With filler pump, suction tube Ø 40 mm, follower plate and self-centering keg lid. Efficient and professional method for filling grease guns and Lube-Shuttle®-cartridges (through Refill-Adapter MC3115050)


incl. high pressure pump. Pressure ratio 1:55, free delivery 500 g/min, max. working pressure 425 bar (6.150 psi), grease connection 1/4", suction tube Ø 40 mm. 3.5m high pressure grease hose, follower plate and keg cover, robust zinc plated trolley with pump bracket and handle, easily assembled.


incl. high pressure pump. Pressure ratio 1:55, free delivery 500 g/min, max. working pressure 425 bar (6.150 psi), grease connection 1/4", suction tube Ø 40 mm. 3.5m high pressure grease hose, follower plate and self-centering keg lid.


incl. high pressure pump. Pressure ratio 1:55, free delivery 500 g/min, max. working pressure 425 bar (6.150 psi), grease connection 1/4", suction tube Ø 40 mm. 3.5m high pressure grease hose, follower plate and keg cover, robust zinc plated trolley with pump bracket and handle, easily assembled.


Pumps

Pumps (Products available in JDPoint through TS programme MA and TS AE starting February 2015)

216 | Pumps

Pumps (Products available in JDPoint through TS programme MA and TS AE starting February 2015)

Lever Operated Barrel Pump HP 350, John Deere

Delivery hose DN16 for MC3463656 and MC3463533

Lever Operated Barrel Pump HP 350V, John Deere

Pump bracket in zinc plated steel

• Barrel pump for 50 to 200 litre drums• Steel telescopic suction tube 450 – 860 mm • Body made of zinc plated steel• 2" and 1 ½" BSP drum adaptors• Detachable outlet nozzle• Output: 350 cc per stroke


1.5 m long with ball valve 1/2" female with adaptor 3/4", female to 1/2" male, hoseclip and outlet nozzle.


For 50-60 litre drums, span. 350-390 mm


As MC3463533 lever operated barrel pump HP 350, but with Viton seals, compatible with alcohol, anti-freeze, thinners, also Cool-Gard II. Ensure fluid is compatible with VITON.


Mobile Pneumatic oil pump system with Preset-Function

Stationary Pneumatic oil pump system with Preset-Function

20L Container hand pump KHP 350V, John Deere branded with Viton seals

for 200L oil drums, with trolley. With 4m and 10m delivery hoses.Mobile tank kit comprising: mechanical counter with Preset-Delivery-Function. from 0.1 to 99.9 litres. Non-drip nozzle with swivel joint, electronic LCD display, trolley.Pack Content: 1Pack Qty: 1

Part Number:4m delivery hose: MC340040810m delivery hose: MC3400880

for 200L oil drumsStationary tank kit comprising: mechanical counter with Preset-Delivery-Function from 0.1 to 99.9 litres. Non-drip nozzle with swivel joint, electronic LCD displayPack Content: 1Pack Qty: 1


Hand pump with 1.5 m rubber hose and ball valve, sturdy pump bracket. Designed for JD Cool Gard II 20l Plastic Container.


Stationary Pneumatic oil pump system, for 200L oil drums

Stationary tank kit with Pressure Ratio 1:3, with 2" BSP Drum Adaptor, Steel suction tube for 200 litre drums with filter, 4 m delivery hose DN 12 (1/2"), electronic hose calibratable, with Non-drip nozzle for engine oil and swivel, end flow meter, electronic LCD display,2 displays (totaliser and resettable display)Pack Content: 1Pack Qty: 1


218 | Turf Attachments

Turf Attachments (Products available through JDMint and JDPoint)

219|Gator Attachments

Gator Attachments (Products available through JDPoint)

220 |

Gator Attachments (Products available through JDPoint )

Gator Attachments

Individual Cab Components for protection and convenience

Glass Windshield w/Wiper Deluxe Cab, effortless opening/closing includes Wiper (electrical kit required) all XUV855D (except S4)/A2/XUV825i BM23507 all T series/A1 BM21462

Rear Window Deluxe Cab Automotive glass rear window provides excellent visibility all XUV855D (except S4)/A2/HPX/A2/XUV825i BM23505

Electrical Kit, required to power electrical cab accessories. all XUV855D (except S4)/A2 VGB10505 all T series/A1 BM22138

Hard Door Kit Heavy-duty doors can be opened or closed with one hand all T series/A1 BM22600* all XUV855D (except S4)/HPX/A2/XUV825i BM24560**Soft Door Kit – all T series BM22526* Air Cleaner Relocation Kit HPX/XUV855D/XUV855D S4/A2 BM23638 XUV825i BM23768

Noise Reduction Kit – all XUV/HPX/A2 BM23750 Use with BM23638 air cleaner relocation kitHeater Kit req. VGB10548 – all XUV855D/HPX/A2/XUV825i BM23608 TH/A1 BM22229

Visor Kit all T/A1/all XUV855D (except S4)/HPX/A2/XUV825i BM21646Heavy Duty Front Suspension VGB10544The heavy-duty front strut kit provides improved ride and handling when equipped with a deluxe cab frame with hard door kit, a 72-in. front blade or for any configuration where front struts frequently strikethrough a bottom out. (only HPX)

*requires BM21645, BM21965, BM20414** requires BM23609, BM23638, BM23750

Reservior Bottle On/Off Rocker Switch

Spray Nozzle

Cab HeaterVisor Del. Cab

Please check online in the Global Product Configura-tor for any recent part number update and bundle change.

221|Gator Attachments

Gator Attachments (Products available through JDPoint )

Lights

Warn winch

If the dark comes, you have lighting optionsFront Working Lights Kit BM21651*Two 55 W halogen lights tie into the vehicles’s wiring harness for quick installation. All XUV855D (except S4)/HPX/T series/A2/XUV825i

Rear Working Light Kit BM21652*One 55 W halogen light ties into the vehicle's wiring harness for quick installation. All XUV855D (except S4)/HPX/T series/A2/XUV825i

Beacon Light Kit all XUV855D (except S4) T series/A1/HPX/A2/XUV825i BM21646* XUV550/XUV550 S4 BM24013*/**Waterproof rotary light provides excellent visibility to vehicle bystanders.

Interior Light Kit BM21656*Overhead light provides visibility during the night.All XUV855D (except S4)/HPX/T series/A2 with Deluxe Cab/XUV825i

Hella Performance Spotlights BM2410855 Watt H3-quarz halogen lights are compatible with XUV/A2 & HPX models. Requires the Heavy duty brush guard

*requires VGB10505 electrical kit

**requires BM24089 OPS switch bank

Front Working Lights and Beacon Light

Hella Performance Spotlights

Warn winch

12-V electric powered front & rear mounted winch with 1361kg pulling capacity for XUV550 S4 BM24723* for XUV550 BM24437* *req. BM23363 for XUV855D, A2, XUV 825i/ XUV 855D S4 BM24443* *req. BM23105 2-in. Receiver Hitch Winch Multi-Mount Kit for TS, TX, TH, A1, HPX BM24442* *req. BM19972 (front) or BM21467 (rear) & AM137110, for TH, A1 also VGA10459

Please check online in the Global Product Configura-tor for any recent part number update and bundle change.

222 | Cargo Box attachments

Cargo Box attachments (Products available through JDPoint )

Cargo Box Side Extension Kit Cargo Box Divider Kit

Cargo Box Tool Rack Cargo Box Power Lift Kit

Increases Deluxe Cargo Box side height to haul more light material. T-Series (except TS), XUV855D, XUV855D S4, XUV825i BM24901XUV550, XUV855 S4 BM23384HPX BM22572

Creates compartments in the front or rear of the Deluxe Cargo Box.*

* Not compatible with BM22774 Cargo Box Side Wall Extension Kit

T-Series (except TS), XUV855D, XUV855D S4, XUV825i BM22769

Maximises use of the deluxe cargo box by carrying long-handled tools on the side of the box*

*Not compatible with BM24901 Cargo Box Side Wall Extension Kit

T-Series (except TS), XUV855D, XUV855D S4, XUV825i BM22775

This is one of the most important accessories for increasing work efficiency. It is an excellent complement to this highly capable utility vehicle.

Part number:

TH BM23759TE BM22873CX BM22875TX, TX Turf, TE BM23734TS BM23765XUV855D, XUV855D S4, XUV825i

BM25143

HPX BM25188XUV550, XUV550 S4 BM25410

John Deere offers a variety of attachments for your cargo box.

Please check online in the Global Product Configurator for any recent part number update and bundle change.

223|

Riding Lawn Equipment Attachments (Products available through JDMint and JDPoint)

Riding Lawn Equipment Attachments

A range of great value turf attachments for the winter season.

224 | Snow Blower

Snow Blower (Products available through JDMint and JDPoint)

Heavy-duty, two-stage design gives these snow blowers excellent performance and long life in consumer and commercial operating conditions:

■ Low-speed auger brings in and sizes the snow. ■ High-speed rotor gives the discharged snow consistent velocity - even in very light clean-up volumes.

– Rotor is formed from durable and rust-resistant, ultra-high molecular weight (UHMW) polyethylene material proven in the Power Flow™ blower fan.

■ A centrally mounted cast-iron gearbox provides speed reduction for the auger. Each half of the auger is protected by shear bolts.

■ The discharge spout and deflector are made from high-density polyethylene material that will not dent or rust and resists snow buildup.

■ Spout direction and deflector angle can both be conveniently controlled from the operator station. ■ In-line drive system gives efficient transfer of power and dependable operation.

John Deere two-stage snow blowers expand the versatility of John Deere X300 and X500 Series Tractors:

44-in. (112-cm) Snow Blower for X300s 7001M47-in. (119-cm) Snow Blower for X500s 7002M

These snow blowers offer customers the highest-quality product. Full-height housings are stamped from heavy-gauge steel to provide the customer with superior performance and long life.

A quick-hitch mounting system helps take the effort out of installation and removal of the snow blowers. The The snow blower slips over and locks onto the front hitch with attached snap pins:

■ Fast and easy installation with no tools or loose parts ■ Hitch provided with the snow blower

Skid Shoe, Heavy Duty Left Hand AM122263 Extra-wide skid shoe provides wear life improvement in commercial applications or abrasive conditions

Skid Shoe, Heavy Duty Right Hand AM122264Extra-wide skid shoe provides wear life improvement in commercial applications or abrasive conditions

Skid Shoe, Plastic M157831Reduces scratching on driveway and sidewalk surfaces Two required

44-in. (112-cm) Snow Blower 47-in. (119-cm) Snow BlowerTractor compatibility Select Series X300R, X305R, X300,

X304, X310, and X320Select Series X500 Multi-Terrain

Lift system Foot lift with spring assist Hydraulic liftHeight to top of housing 45.7 cm (18 in.) 50.8 cm (20 in.)Auger diameter 30.5 cm (12 in.) 40.6 cm (16 in.)

44-in. (112-cm) Snow Blower

Snow blower quick-hitch mounting system

Introducing the 44-in. (112-cm) and 47-in. (119-cm) Snow Blowers

47-in. (119-cm) Snow Blower housing and auger

For 2015, the line-up of snow blower attachments and key-feature differences maximises customer value and provides features well-matched to the tractors they are compatible with, as shown in the chart below:


225|

Front Blades & Brooms (Products available through JDMint and JDPoint)

Front Blades & Brooms

Front Blade

Tyre Chains (Pair)

Rubber Blade Squeegee Kit

Manual Angling Kit

When push comes to shove, you’ve got plenty of choices, no matter what time of the year or the type of job.

Excellent for pushing snow or other loose material straight forward, to the right or left. Blade surface is curved to roll rather than push material, which requires less power and increases blade capacity.

Products available through JDMint: 1.12 m (44 in.) – X300 Series 6001M 1.22 m (48 in.) – X500 Series 6002M

More effective cleaning of wet or slushy snow while preventing scratching of the driveway surface. Reduces risk of damage along footpaths pavements and driveways.

Products available through JDPoint: For 1.22 m (48 in.) and 1.37 m (54 in.) Front Blade M42868

Allows angling blade from the tractor seat for operator convenience.

Products available through JDPoint: For 1.22 m (48 in.) Front Blade BM23448

Recommended for use with front blade, etc. Use first and second number of tyre size to select chains. Third dimension is rim diameter, which does not usually affect chain size.

Products available through JDPoint: Tyre chains (pair) for 18x8.5 X135, X155, X110, X120, X130 TY15717

Tyre chains (pair) for 20x10-8 X300, X304, X310, X305R, X110, X120, X130 TY16200

Tyre chains (pair) for 20x8 X125, X145, X110, X120, X130, X105 TY15959

Tyre chains (pair) for 22x11-10 X320, LX TY24327

Tyre chains (pair) for 22x8 X165, X110, X120, X130 TY25229

Tyre chains (pair) for 23x9.50-12 X534 TY26227

Tyre chains (pair) for 24x12-12 X540, X590, GT, GX TY24328


226 |

Front Blades & Brooms (Products available through JDPoint)

Front Blades & Brooms

Broom with Debris-Catcher

Working width: 1.20 m (47 in.)Top mounted wheel high adjustment, angle left or right, dual bristle broom includes easy-on, easy-off debris catcher. Min requirements: Add-on parts, driveline, quick hitch with drive. Add-on parts are shown under Accessories for Front Blade & Broom.

Products available through JDPoint: Broom with Debris Catcher SAB00726 Not compatible with SAB00724 front blade Not compatible with BM23056 front bumper

Accessories for Front Blade & Broom

Front Blade

Working width 1.25 m (49 in.) high: 42 cm (16,5 in.)Protective Break-Back System, angle left or right, ground skids, rubber lip on blade, marker flags. Min requirements: Add-on parts, quick hitch. Add-on parts are shown under Accessories for Front Blade & Broom.

Products available through JDPoint: Front Blade SAB00724 Requires add-on parts and quick hitch Not compatible with SAB00726 rotary broom Not compatible with BM23056 front bumper

Select your model to check which accessories are needed to attach a blade or a broom. Blade: add-on parts and quick hitch without drive are necessary Broom: add-on parts and driveline quick hitch with drive are necessary

Basic Parts Frontblade assembly Rotary Broom assemblyJohn Deere Model Add-on Quick hitch

FrontbladeQuick hitch

DrivelineRotary

Series Model Year parts w/o drive w/ drive Broom

LR-Series

LR135 2008-2009 SAB00762

SAB00720 SAB00724

SAB00722 SAB00761

SAB00726

LR135 2009 SAB00762 SAB00722 SAB00761LR175 2001-2009 SAB00701 SAB00722 SAB00766LR175 2009 SAB00903 SAB00922 SAB00904

X100-Series

X110, X120 2009-2010 SAB00764 SAB00722 SAB00765X140 2009-2010 SAB00764 SAB00722 SAB00767X125, X145, X105 2011-2014 SAB00907 SAB00922 SAB00908X165 2011-2014 SAB01107 SAB00922 SAB01108X130R, X155R 2011-2014 SAB00905 SAB00922 SAB00906X135R, X115R 2011-2014 SAB00905 SAB00922 SAB10014

X300-Series

X300, X304, X320 2007-2010 SAB00756 SAB00722 SAB00758X300R 2007-2010 SAB00756 SAB00722 SAB00760X300, X304, X320 2011-2014 SAB01161 SAB00922 SAB01162X300R, X305R 2011-2014 SAB01156 SAB00922 SAB01160X310 2011-2014 SAB01157 SAB00922 SAB01159

X500-Series

X534, X540 2007-2010 SAB00757 SAB00722 SAB00759X540 2011 SAB00757 SAB00922 SAB00759X540 2012-2014 SAB10012 SAB00922 SAB10013X534 2011-2014 SAB01157 SAB00922 SAB01159

Note: Basic parts ares always needed to fix a Frontblade or Rotary Broom. For full functionality you have to add Frontblade assembly (coloured in yellow) or Rotary Broom assembly (coloured in green)


227|

Weights (Products available through JDPoint)

Weights

Quik-Tatch Weight, 19 kg Wheel Weights

Use these cast-iron weights to counterbalance a heavy attachment and/or provide greater traction and stability. Some vehicles have built-in front and/or rear weight brackets to hang the weights on; others require a weight bracket that must be ordered separately. No box – X100, X300, X500, X700 Series. When installed on front bumper of X700 Series tractor, M147986 rod and (2) M40461 spring clips are required. For models LT, LX, GT, GX the Quick-Tatch-Weight can be used as well.

Products available through JDPoint: Quik-Tatch Weight, 19 kg (42 lb) R66949

Weights for front wheels are recommended with rear grass baggers on slopes and may be required with heavy rear-mounted equipment. Rear weights are recommended for additional traction, especially with snow blades and brooms.

Products available through JDPoint: Front Wheel Weight (1 Pc.) for X100 Series (except X165), X300 Series (except X320), LT, LX, GT, GX (req. BM17978) BM17962 Mounting hardware kit for Front Wheel Weight (BM17962) X100 Series, X300 Series, X500 Series (except X590), LT, LX, GT, GX BM17978 Rear Wheel Weight (1 Pc) 22 kg (50 lb) (req. BM17985) for X500 Series, X700 Series and G Series BM17972 Mounting hardware kit for Rear Wheel Weight For attaching (only) one weight (X500 Series, X700 Series, G Series) BM17985 For attaching two weights to (one) wheel (X500 Series, G Series) BM17977

Provides a tractor-mounted bracket required on some tractor models for hanging two or more 19 kg (42 lb) Quik-Tatch weights (R66949).

Products available through JDPoint: Rear weight bracket for 2 weights – Fits X100-Series (X105, X125, X145, X165, X110, X120, X140) BG20627 Rear, 2 weightss – X300 Series (X300, X304, X310, X320); 4 weights – X534 BM24011 Front, 4 weights – Fits all X300s, X500 (SN020001-), X534 (SN060001-) BM23621 Front, 9 weights – X700 Series BM24363

Weight Brackets

540 RPM Rear PTO Drive

Used to drive stationary and 3-point-hitch-mounted equipment. Three-position control lever; mid PTO, rear PTO only, and mid and rear PTO. Dealer installation recommended

Products available through JDPoint: X700 Series BM23589*


* MY2011 and for SN M0740B050493/748B050523/749B050156

or higher BM24736 is required.

228 |

X700 Attachments (Products available through JDMint and JDPoint)

X700 Attachments

1.32 m Quick Hitch Rotary Broom Front Quick Hitch & Hydraulic Lift Kit

The broom is a four-season implement designed to increase the versatility of the tractor by allowing it to be used for a variety of sweeping jobs.X700 Series requires front quick-hitch, hydraulic angling, 2000 RPM mid-to-front PTO kit and implement drive shaft.

Products available through JDMint: 1.32 m Quick Hitch Rotary Broom 3880M

Products available through JDPoint Front PTO drive (2000 1/min) 2WD requires BM20966 shield kit (X750/X754) BM24361

Front PTO drive (2000 1/min) 4WD requires BM20978 shield kit (X758) BM24362

The front quick-hitch is required on X700 Series tractors with front blade, rotary broom.

Products available through JDPoint: X700 Front Quick Hitch BM19782

1.37 m Quick Hitch Front Blade

Excellent for pushing snow or other loose material straight forward, to the right or left. Blade surface is curved to roll rather than push material, which requires less power and increases blade capacity. Heavy Duty Construction with Breakaway Feature. Requires Front Quick Hitch and Hydraulic Angling.

Products available through JDMint: 1.37 m Quick Hitch Front Blade 1491M

Hydraulic Angling X750/X758/X754

Provides 0 to 27 degrees angling to the right or left using the tractor s hydraulics. Required for some front Quick-Hitch mounted implements.

Products available through JDPoint: Hydraulic Angling BM20837

2000 RPM Mid-to-Front PTO Kit

Required to operate rotary broom or other 2000 rpm powered front equipment.

Products available through JDPoint: Front PTO drive (2000 1/min) 2WD X750/X754 BM24361

PTO Shield X750/X754 BM20966

Front PTO drive (2000 1/min) 4WD X758 BM24362 PTO Shield X758 BM20978


229|

X700 Attachments (Products available through JDPoint)

X700 Attachments

Front Fender Kit X700 Series

Brush Guard

3 Point Hitch X700 Series

Rear Reciever Hitch Kit and Hitch Drawbar Kit

Products available through JDPoint: Front Fender 2WD (X750) BM24429 Front Fender 4WD (X758) BM24430

The brush guard adds a distinctive appearance to the tractor and protects the front of the tractor from damage. Not compatible with Front-Quick-Hitch.

Products available through JDPoint: X700 Series BM24375

Conveniently attach rear-mounted equipment to the tractor. Hitch is raised and lowered with tractor hydraulic control lever.

Products available through JDPoint: Cat. 1 – X700 Series X700/X740/X748/749/X750/X758/X754 BM23882

Products available through JDPoint: Rear receiver hitch kit bolts on the tractor rear hitch plate to provide a standard 1-1/4-in. x 1-1/4-in receiver hitch. X700 Series not homologated. BM20877

Drawbar kit (right) shown with PM05101 ball hitch. X700 Series not homologated BM23989

Wagon hitch for receiver hitch (road homologated) X700 Series BM21535

Front “Special-Edition” fenders are available for protection from mud and debris. Fenders are mounting parts for both front wheels.


230 |

X700 Attachments (Products available through JDPoint)

X700 Attachments

Road homologation on X750 Signature Series Tractors

National general single-type homologation

For many countries, a national homologation as a working machine is possible. The homologation department provides the necessary documents that are needed for the individual country homologation processes. No certificate of conformity (COC) will be provided. The homologation kits are set up so they can be customized to the local requirements. The requirements for a national homologation are, in most cases, easier to achieve and less expensive than European Commission (EC) tractor homologation. Competition, in many cases, only offers a national homologation. With the availability of this type of homologation on our products, John Deere is now more competitive. The following attachments need to be ordered:

As the requirements vary by country additional kits like beacon light may be required.

Note: For model year 2013/14 an EC tractor homologation was available. Even if not any longer supported, for single approval as tractor we still offer the needed parts.

For model year 2015 X750 Signature Series Tractors, a national general single type homologation is available for all three Region 2 models, the X750, X754, and the X758.


Seat that comes standard with X750 Series RegulationBase road homologation kit BM24291 Consists of road homologation lighting kits and mirrors MandatoryLicence plate holder req. BM24291 BM24605 Consists of a license plate holder including licence plate light Country specific

Seat LVA15845 Seat with type approval. Requires BM24424.

Seat suspension BM24424 Required platform to mount LVA15845. Requires LVA15845.

Serial number plate BM24695 Serial number plate according to EEC tractor homologation

Front hitch BM24423 Front hitch to meet EC tractor approval requirements

Rear hitch BM21984 Rear hitch with type approval

NOTE: As the X750 Series comes with an installed seat ex-factory, there is no option to order a X750 Series Tractor for EC tractor homologation without a standard seat.

231|Accessories for Mower Decks & Machines

Rear Bumper

Rear Hitch

Home Maintenance Kit

Foot Rest Extensions

A convenient way to obtain maintenance parts as specified in the operator’s manual; includes engine oil filter, engine oil, fuel filter, fuel filter element, air filter element foam, and spark plug(s). (Diesel Engines w/o plugs)

Products available through JDPoint:STX38 LG182 F510, GT242, LX176 LG183 LX178, LX188 LG184 F525, LX178 LG185 455 LG189 LT166, LT170, LTR166, LX288 (Serial No. 000001 thru 090000), SST16

LG190

LT133, LT150, LT155, LTR155, LX173, LX177, LX255, SST15 LG191 Sabre 1438GS/HS, 1538HS, 1542GS/HS LG193 LT190, LTR180, LX277, LX280, LX288 LG195 Sabre 1646HS, 1742GS/HS LG196 LX279, LX289 LG197 L120, 145, X140 LG230 LT160 LG240 X495, 6x4, Gator 6x4, HPX4x2, HPX4x4, ProGator2030 LG243 X700, X475 LG245 X320, X534, X324, X340, Z445, Z465 LG249Z225 (Serial No. 000,001-060,000) LG251115, Z225 (Serial No. 060,001-100,000) LG253 105, L107 LG254 X300, X304, X300R, X305R (Serial no 000001-150,000) LG256X540 LG257X750, X754, X758, X495, X595, X748, X749 LG260Z425 (Serial No. 000,001-040,000) LG263Z425 Serial No. 040,001-100,000 LG264X300R, X300, X304, X310, X320, X305R, X534 (Serial no. 150,001-)

LG265

Z225 (Serial No. 100,001-120,000) LG267Z225(Serial No. 120,001-), Z425 (Serial No. 100,001-), Z245 (Serial No. 100,001 -)

LG268

Z645 (Serial No. 100,001-), Z465 (Serial No. 100,001 -) LG269X125, X145, X135R, X105 LG271X165, X155R LG272

Makes mowing more comfortable for the operator. Includes bolt-on left and right foot rests for EZtrak Mover Z225/Z425/Z625/Z645

Products available through JDPoint:

Part number: AM137437

Bolts to the tubular frame for solid support. Provides protection for EZtrak Mover Z225/Z425/Z625/Z645



Bolts solidly to tubular frame and provides towing capability. The rear bagger bracket is included with the rear hitch for EZtrak Mover Z225/Z425/Z625/Z645



Accessories for Mower Decks & Machines (Products available through JDPoint)


232 |

Roller Striping Kit

The roller kit creates a "ball park" striping effect, enhancing the finished look of the turf. The 2-in. diameter rollers are mounted to a strong 7/8-in. steel shaft.


X700 Series with 60 inch high capacity deck. Part number: BM23648

Accessories for Mower Decks & Machines

Mower Blades

Mower Blades High Lift

42M Mulch Insert Kit

Standard side-discharge blades provide like-new performance

Products available through JDPoint: Part number:

38X mower on X300, X310, X320, X305R side discharge (complete kit)

AM141039

42X mower on X300, X310, X320, Z235 side discharge (complete kit)

AM141032

Bagging and rear discharge X300R, X305R AM14097448C, 48X side discharge mower on X534, X540 (3 required) M14547654C, 54X side discharge X534, X540 (3 required) M143520

High lift blades provide improved bagging performance in heavy and, or wet grass conditions, can also be used on side discharge

Products available through JDPoint: Part number:122 cm (48-in.) mower on X165 (3 required) X110, X120, X140 GX21785 38X mower on X300, X310, X320 (complete kit) AM14104162X mower on X700 Series (except X750, X754, X758) (3 required)

M152727

60-inch 7-Iron mower on X700 Series (except X750, X754, X758) (3 required)

TCU15881

42X bagging blade kit on X125, X145, X300, X310, X320, Z225, Z235, X110, X120, X140, X105

AM141034

Two plastic inserts that give Freedom 42 underside contours to Edge Mulch Deck (42M).

Recommended for buyers who previously owned a Freedom 42 mower deck


Accessories for Mower Decks & Machines (Products available through JDPoint)

Mower Blades-Mulching

Blade included with the mulch kit is designed for optimum mulching performance; can also be used for side discharge.

Products available through JDPoint: Part number:

48C, 48X mower on X534, X540 (3 required) M12767338X mower on X300, X310, X320 (complete kit) AM14104042X mower on X300, X310, X320, Z235 (complete kit) AM14103342M Edge Mulch mower on X300, X304, X310, X320 (complete kit) AM14097342 Rear Discharge Mower X300R, X305R (complete kit) AM14097554C, 54X mower on X534, X540 (3 required) M145516 62X mower on X700 Series (except X750, X754, X758) (3 required)

M145719

42 Rear Discharge Mower X130 LH GX2322742 Rear Discharge Mower X130 RH GX2322848 in. on mower X110, X120, 140 GX2081948 in. on mower X165, X110, X120, X140 GX21786Mulch kit 48C deck on X750, X754, X758 , X320, X534, X540, LX, LT, GX, GT

BM20007

Mulch kit 54HC deck on X750, X754, X758 Mower Blade M135334

BM23977

Mulch kit 60HC deck on X750, X754, X758 Mower Blade M1688223

BM23978


Arrows point to mulch kit components

Arrows point to mulch kit components

233|

230 ltr. Hopper & Chute

250 ltr. Rear Bagger System 500ltr. Power Flow System

Rear Deflector Kit

230 ltr. Hopper & Chute Assembley with the Power Flow System

Provides an efficient means of collecting leaves and grass clippings using the power flow material collection system.

Provides an efficient means of collecting grass clippings and leaves. The hopper design provides great bagging performance, cleaner operation and easy empty bags. Incl. CE, also for L105/L107

Provides an efficient means of collecting grass clippings and leaves. The hopper design provides great bagging performance, cleaner operation, and easy-to-empty bags.

Fits models: X300, X310, X320, X534, X540, X590

500 ltr. capacity allows more material collection before needing to stop to empty bags.

Optional rear deflector kit for rear discharge tractor easily installs in place of hopper. No tools required for installation. Deflects clippings in an even pattern behind the tractor.


Fits X300R, X305R Tractor Part number: BM22196

Fits X130R, X135R, X155, X115R Tractor Part number: BG20822

Grass Collecting & Maintenance (Products available through JDPoint)

Grass Collecting & Maintenance

Products available through JDPoint: Part number:3-bag 500L HopperX500 Series BM24510

48 in. Mower Deck requires 48754 Power Flow Chute and 48 Power Flow Blower compl. incl. CE Kit

BM21682 BM24470

54 in. Mower Deck requires 48754 Power Flow Chute and 54 Power Flow Blower (compl. incl. CE Kit) compl. incl. CE Kit

BM21682 BM24471

X700 Series BM2451354C Mower Deck w. Chute BM2152662C Mower Deck w. Chute BM2149354HC Mower Deck w. Power Flow Blower

Chute requires Click-N-Go Brackets compl. incl. CE Kit

BM24516 BM24691 BM20714

60HC Mower Deck w. Power Flow Blower Chute

requires Click-N-Go Brackets compl. incl. CE Kit

BM24515 BM22535 BM20714

Products available through JDPoint: Part number:2-bag 250L Hopper BM24508

38X requires 38-in. cut/throw chute BM2098242X requires 42-in. cut/throw chute BG20766 48X requires 48/54 Power Flow chute and

48 Power Flow blowerBM21681/ BM24470

54X requires 48/54 Power Flow chute and 54 Power Flow blower

BM21681/ BM24471

Products available through JDPoint: Part number:Fits all 42 in. X100 Series (X125, X145, X100, X120, X140, X105) Mower Decks, req. AM141034 Blade Kit

BM24469

Fits all 48 in. 100 Series Mower Decks, (req. 3 x GX21785 for X100, X120, X140)

BM24507


Products available through JDPoint: Part number:2-bag bagger 230L Hopper BM24511

Fits Z225 (w/o power flow) with cut/throw chute BM23568Fits Z425 with 48/54 power flow chute and

power flow blowerBM21681 BM24484

Fits Z645 with 48/54 power flow chute and power flow blower

BM21631 BM24512

234 | X950R Attachments

X950R Attachments (Products available through JDPoint)

Need to use public roads between locations?

The road homologation gives you the flexibility of easy relocating from one jobsite to another. The kit includes road homologation lights, horn and a licence plate holder.If you have either a high- or low-dump completion tractor the appropriate homologation lights kit needs to be ordered in addition.

Road Homologation kit BM25439

Homologation lights kit for low-dump completion BM25438

Homologation lights kit for high-dump completion BM25437

Road homologation on X950R

235|Grass Collecting & Maintenance


Front Quick Hitch and Hydraulics 1.32 m Quick Hitch Rotary Broom

Front PTO Kit

The front quick-hitch is required for X950R tractors with rotary broom. Front hitch hydraulics are available for this quick hitch.

Front quick hitch BM25334

Front quick hitch hydraulics BM252641.32 m quick hitch rotary broom (Product available through JDMint) 3880M

Driveshaft for rotary broom BM25356

Front PTO kit BM25364

The broom is a four-season implement designed to increase the versatility of the tractor by allowing it to be used for a variety of sweeping jobs. X950R tractor requires Front Quick Hitch (BM25334), Hydraulic Angling kit (BM20821), Front PTO kit (BM25364), Driveshaft (BM25356).

Ball Hitch

Attach the ball hitch to the drawbar or rear hitchto allow towing.

To operate the rotary broom the front PTO kit is required.

Ball hitch 1-7/8” PM05101

Ball hitch 2” PM05201

Hydraulic Angling Kit

Weights & Brackets

Provides 0 to 27 degrees angling to the right or left using the tractor s hydraulics. Required for some front Quick-Hitch mounted implements.

Use these cast-iron weights to provide greater driving comfort for tractors with collection systems. Four weights are mandatory for high-dump. The optional orientation bracket allows pointing the weights on side to see the tractor front end and to reduce overall length.

Hydraulic angling kit BM20837

Suitcase weight 19 kg (42lb) R66949

Front weight bracket for 9x R66949 BM24363

Front weight bracket (optional orientation) BM25335

Rear weight bracket BM25278

236 | X950R Attachments


Parking Stands Deflector Shield

Parking stands allow a fast and convenient hooking and unhooking of the collector system. The tailor-made design for high- and low-dump collector provides a firm stand in parking position.

The 12V power outlet kit can be used for plugging in items such as chargers for cell phones or MP3 players.

12-Volt power outlet kit BM24874

The X950R can be easily modified from a rear collect to a rear discharge mowing tractor by using the deflector kit. This especially supports mowing on different grounds such as large gardens versus extensively maintained street side grass areas. Deflector shield BM25067

The backup alarm kit automatically sounds when put your tractor in reverse. Provides a high level of warning in busy areas when the tractor is changing direction.

Backup alarm kit BM25002

Seats

The X950R is available with two suspended seat options. The comfort seat comes in addition with adjustable back and offers optional arm rests.

Standard seat AM142094

Adjustable seat AM142205

Arm rest kit for adjustable seat BM24426

Parking stand low-dump collector BM25084

Parking stand high-dump collector BM25083

12V Power Outlet Backup Alarm Kit

Tires and Chains

Turf Tyres 18x8.50-10 BM20954

Tyre chains for 26x12.00-12 tyres TY15958

The tyre chain is recommended for extra traction when using winter attachments.

237|

Loader & Tractor Attachments (Products available through JDMint and JDPoint)

Loader & Tractor Attachments

238 |

Loader Attachments (Products available through JDPoint)

Material Buckets

Ballast Box

Rear Wheel Weight

Hood Guard

Load Dirt, gravel and feed. Round back bucket design provides superior material filling and dumping

200CX, 305, H120, H130, D160, D170 1250 mm (49") BW14144200CX, 305, H120, H130, D160, D170 1350 mm (53") BW14145200CX, 300 CX, 400CX, H130, H180, D170 1550 mm (61") BW14146305, 300 CX, 400CX, H165, H180, D170 1850 mm (73") BW14147

Heavy Duty Material Buckets

Designed for heavier applications, this bucket features additional wear bars, bucket and end plate supports and pre-drilled holes for replacing the cutting edges.305, 300CX, 400CX, H165, H180, D170 1550 mm (61") BW14764300 CX, 400CX, H165, H180, D170 1850 mm (73") BW14765

High Volume Material Buckets

The perfect match for moving a large capacity of light material such as mulch, sawdust and feed.

300CX, 400CX, H180, D170 1850 mm (73") BW14658300CX, 400CX, H180, D170 2150 mm (85") BW15273

Enhance loader performance in all conditions with correct ballasting. Order a ballast box extension to add even more ballast to the rear.

Fits 1 Series H120 Loader, 2R Series 200 CX/H130 Loader , 3E Series 305/D160 Loader, 3R Series H165 Loader, 3x20 Series 300 CX Loader, 4x20 Series 400 CX/H180 Loader, D170 LoaderBallast Box BW15073Ballast Box extension BW15074

Protect your grill from brush, debris and those unexpected “bumps” that happen when getting too close while dumping or loading.

1026R, H120 Loader Hood Guard BW159012320, 2025R, H130 Loader Hood Guard BW152172520, 2720, 2027R, 2032R, H130 Loader Hood Guard BW156343036 E, D160 Loader Hood Guard AW339483320,3520, 3720, H165 Loader, 300 CX Loader Hood Guard BW152193R Series, H165 Loader Hood Guard BW166173R Series, H165 Loader Deluxe Hood Guard BW152224x20 Series, H180, 400 CX Loader Hood Guard BW152214R Series, H180 Loader Hood Guard BW163354R Series, 4M Series, H180 Loader, D170 Loader Deluxe Hood Guard BW16155


Loader & Tractor Attachments

1026R32,5 kg (72 lb) Starter Weight Mounting Hardware Kit for BM17973

BM17973 BM18089

22,5 kg (50lb) rear wheel weight Mounting hardware Kit for BM17972 (for mounting one weight on one wheel) Mounting Hardware Kit for BM17972 (for mounting two weights on one wheel)

BM17972 BM17977 BM18101

2x20 Series, 2R Series, 3036E32,7 kg (60 lb) rear wheel weight Mounting Hardware Kit for BM17965

BM17965 BM17987

3036E, 3x20 Series, 3R Series, 4x20 Series, 4M Series, 4R Series25 kg (55 lb) additional wheel weight Mounting Hardware Kit for BM17968 Additional Mounting Hardw. Kit for BM17968 (2 weights)

BM17968 LVB25004 BM19937

3x20 Series, 3R Series, 4x20 Series, 4M Series, 4R Series50 kg (110lb) rear wheel weight Mounting Hardware Kit for T19293 (1st weight) only for 4x20 Series, 4M Series, 4R Series Additional Mounting Hardw. Kit for T19293 (2nd weight)

T19293 BM19939 BM19940

239|Loader Attachments

Loader Attachments (Products available through JDMint and JDPoint)

Loader Attachments

Third Function for Front Loader

External Tool Box

Tooth Bar for Heavy Duty Bucket

Replaceble Cutting Edge w. Hardware

Pallet Tines & Bale Spear

Parking Stand Kit

Hoses and Oil pipes to install the third function for Front Loaders

300 CX, H165 BW16138

400 CX, H180 BW16139

Enjoy a convenient place to hold all of your tools. This handy box can be easily installed in three different areas of the tractor.

3x20 Series, 3R Series Cab LVB24930

4x20 Series Cab or open station LVB24865

Recomended for use with heavy duty bucket only . Not compatible if bucket has a replaceable cutting edge installed

305, 300CX, 400 CX, H165, H180, D170 1550mm (61") BW15227

300CX, 400CX, H165, H180, D170 1850mm (73") BW15228

Recommended for “heavier use” applications, such as Commercial operations. Replaceable Cutting Edge is reversible for longer wear life. Not compatible with tooth bars.

305, 300CX, 400 CX, H165, H180, D170 1550mm (61") BW14762

300CX, 400 CX, H165, H180, D170 1850mm (73") BW14763

Quickly move bulky pallets, boxes and crates. Forks with floating tines can be spaced to match load dimensions. A fixed load support frame provides reliable load handling on fixed-tine models.

Products available through JDMint Pallet Tines compatible with all H120, H180, 200, 300 & 400 CX 2162XF

Bale Spear compatible with all 300 & 400 CX, H180 2002XF

When fitted allows the loader to be removed from the 3036E Tractor

305, D160 BW15872


240 | Tractor Attachments

Tractor Attachments (Products available through JDPoint)

Rear Work Light Kit

Rear Fender Extension

Door Lock Kit

Rear Wiper

Locking Fuel Cap

Vertical Exhaust

Front Fender

Backup Alarm Kit

Shed some light, especially when working with rear implements

3320-4720, 3R Series, 4R Series Cab units LVB24853

1026R Cab units LVB26200

2x20, 3x20, 4x20 Series, 2305, 3203, 3R Series, 4M Series Open Station LVB25547

2R Series, 2320-2720 Open station LVB25652

3x20 Series, 3R Series Open station LVB25684

4x20 Series Open station LVB25683

3320-4720, 3R Series Cab units LVB24860

The door lock kit features a new handle and high security dedicated cab door key that is different from the standard ignition key

The fender extensions significantly reduce soiling of tractor and cab and provide a better visibility.

Ensure clear visibility to the rear in inclement weather. Kit includes a wiper and nozzle that disperses fluid to clean the window.

3320-4720 , 3R Series, 4R Series Cab units LVB24856

A sure way to guard against theft or vandalism.

3320-4720, 3R Series, 4R Series, 4M Series Cab units AL113087

Direct exhaust up and over the operator's head. The perfect choice for exhaust sensitive applications such as certain vegetation.

3x20 Series open station & cab units LVB25884

3R Series open station & cab units BLV10607 4x20 Series open station & cab units LVB25765*

*ask your dealer regarding serial number

3x20 Series Open station & cab units LVB25686

4x20 Series Open station & cab units LVB25685

Guard against unwanted dirt and mud on cab glass or operator station with these front fenders.


3320-4720, 3R Series Cab units AL713453320, 3R Series, 4x20 Series LVB25607

4M Series BLV10358

Backup alarm is an audible alarm that informs operator and bystanders when unit is in reverse.

241|

Tractor Attachments (Products available through JDPoint)

Tractor Attachments

Quick Hitch & Lift KitCruise Control Kit/Automotive Upgrade Kit

Front Hitch with A Frame

With this quick front hitch/PTO we can operate John Deere front attachments like front blade and broom.

1026 R BLV10159*2R Series, 2x20 Series LVB24898***Requires LVB26046 Front attaching support ** Requires LVB24895 Front attaching support

Make changes as easily as you change your mind. Simply drive in, pick up implements, secure with pins and hydraulics and you’re done

2x20 Series, 2R Series, 2030R 3 Point Hitch LVB24811*

3R Series 3 Point Hitch LVB25878***

2x20 Series, 2025R, 2027R, 2030R Front PTO Kit LVB24890

3R Series Front PTO Kit LVB25759***

2x20 Series, 2R Series, 2030R Hydraulic Coupler Kit LVB24891

3x20 Series Front PTO (engine driven) LVB25746**

*Requires LVB24889 to be fitted on 2320 or 2025R tractor or LVB25875 to be fitted on 2520/2027R and 2720/2032R** Requires (works with) LVB25878*** LVB24810 is needed when a mower deck is mounted on the tractor.

This kit provides the possibility to use all the electronic benefits on the tractors equipped with eHST.

The kit includes:– Motion Match Switch– Automotive Cruise Switch– Speed Match– Load Match Switch

3320-4720 LVB258663036 E (Mechanical) Cruise Control BLV10486


JohnDeere.comJohnDeereshop.com

This literature has been compiled for worldwide circulation. While general information, pictures and descriptions are provided, some illustrations and text may include finance, credit, insurance, product options and accessories not available in all regions. Please contact your local dealer for details. John Deere reserves the right to change specification and design of products described in this literature without notice. M

C201

5JD

MEN

G

john deere accessories, maintenance, workshop arrachments 2015

Documents

john deere brand

john deere dealers

john deere organization

range of products

uptime of john deere

new products

products performance

wider choice of accessories