Just KissesDesigned by Wishwell for RKwww.robertkaufman.com

Featuring

CHEERY UP

For questions about this pattern, please email Patterns@RobertKaufman.com.

Finished size: Placemats -15-1/2” x 18-1/2”, Table Runner - 15-1/2” x 48-1/2”

page 2

Fabric and Supplies Needed

WEL-20296-256 RETRO

WEL-20299-31 IVY

WEL-20297-262 BUBBLE GUM

WEL-20299-14 NATURAL

WEL-20298-121 LIPSTICK

WEL-20298-85 VANILLA

WEL-20298-55 SWEET PEA

WEL-20299-397 LADYBUG

WEL-20300-143 CORAL

WEL-20300-32 MINT

Fabric amounts based on yardage that is 42” wide.

A G

B H

I

J

C

D

E

F

2/3 yard 1/2 yard

1/4 yard 1/3 yard

1/4 yard

1/3 yard

1/3 yard

2/3 yard

1/2 yard

1/4 yard

7/8 yard

Copyright 2021, Robert KaufmanFor individual use only - Not for resale

You will also need:

• Backing: 1-1/3 total yards for the Placemats, plus 1-1/3 yards for the Runner

• Other: Fusible paper-backed web 4 yards

WEL-20299-397 LADYBUG

*Also used for Fabric F

Binding*

Color ColorFabric FabricName/SKU Name/SKUYardage Yardage

- Read through all of the instructions before beginning.- All of the seam allowances are 1/4” unless otherwise noted.- Press seam allowances open unless otherwise noted. - Width of fabric (WOF) is equal to at least 42” wide.- Right sides together has been abbreviated to RST.- Remember to measure twice and cut once!

Notes Before You Begin

page 3

Tip: As you cut, place the squares in stacks by their end use: Placemats 1-4 or the Runner. This will have you organized for quick piecing! From Fabric A, cut:six 3-1/2” x WOF strips. Subcut: fifteen3-1/2”squaresforPlacement1 fifteen3-1/2”squaresforPlacement3 forty 3-1/2” squares for the Runner

From Fabric B, cut:two 3-1/2” x WOF strips. Subcut: nine 3-1/2” squares for Placement 3 fifteen3-1/2”squaresforPlacement4 From Fabric C, cut:eight of Template 2eight of Template 3eight of Template 8

From Fabric D, cut:one 3-1/2” x WOF strip. Subcut: nine 3-1/2” squares for Placement 4eight of Template 5eight of Template 10

From Fabric E, cut:three 3-1/2” x WOF strips. Subcut: nine 3-1/2” squares for Placement 1 six 3-1/2” squares for Placement 2 sixteen 3-1/2” squares for the Runner

From Fabric F, cut:eight of Template 1eight of Template 7

From Fabric G, cut:eight of Template 6

From Fabric H, cut:three 3-1/2” x WOF strips. Subcut: nine 3-1/2” squares for Placement 2 twenty-four 3-1/2” squares for the Runner

Cutting Instructions

page 4

From Fabric I, cut:one 3-1/2” x WOF strip. Subcut: six 3-1/2” squares for Placement 3 six 3-1/2” squares for Placement 4eight of Template 4eight of Template 9

From Fabric J, cut:two 3-1/2” x WOF strips. Subcut: six 3-1/2” squares for Placement 1 fifteen3-1/2”squaresforPlacement2

From the Binding Fabric, cut:eleven 2-1/2” x WOF strips

Step 1: Copy all templates at 100%.

Step 2: On the fusible web, trace the indicated number of each Template, as instructedon the Template sheets. Be sure to note the quantity. Tip: In addition to the piece number, include the fabric letter shown on the Template. This will help you to ensure you are fusing it to the correct fabric.

Step 3: Cut out each traced shape, leaving 1/4”-1/2” of excess fusible web outside the marked lines. You will NOT cut on the marked/traced lines at this point.

Step 4: Follow in the steps below to fuse each piece to the appropriate fabric. Fuse, following the manufacturer’s instructions, then cut out each shape on the marked line.

Step 5: Gather: nine Fabric E squaresfifteenFabricAsquaressix Fabric J squaresArrangeinfiverowsofsix,asshown,notingthefabricplacementinthe diagram.

Step 6: Sew the squares together to form the rows, pressing the seams in opposite directions every other row.

Prepare the Templates

Assemble the Placemats

Step 7: Sew the rows together, nesting the seams and pressing the row seams to one side.

The resulting Placemat base should measure 15-1/2” x 18-1/2”.

page 5

Step 8: Repeat Steps 5-7 to make Placemats 2-4, using the fabric placements shown here.

PLACEMAT 2 PLACEMAT 3 PLACEMAT 4

Step 9: Gather: forty Fabric A squarestwenty-four Fabric H squaressixteen Fabric E squaresArrangeinfiverowsofsixteen,asshown,notingthefabricplacementinthediagram.

Step 10: Sew the squares together to form the rows, pressing the seams in opposite directions every other row.

Step 11: Sew the rows together, nesting the seams and pressing the row seams to one side.

The resulting Placemat base should measure 15-1/2” x 48-1/2”.

Assemble the Runner

Step 12: Using the Appliqué Placement diagram as a guide, place the assorted Template pieces in the pairings indicated. Pin in place on their respective Placemats or Runner.

page 6

One piece at a time, peel the paper backing from the lower layer Template pieces and fuse to the base. Continue by peeling the backing to the upper layer Template pieces and fusing to the base as indicated in the Quilt Assembly Diagram.

Edge stitch the templates to the block.

Repeat for all four Placemats and the Runner, using the cover image as a placement guide.

Your Placemats and Runner tops are complete! Baste, quilt, bind and enjoy!

page 7

Templates

Print at 100%. Check size printed correctly using 1” box for scale prior to cutting fabric.Templates shown in reverse.

page 8

This pattern may be used for personal purposes only and may not be reproduced in any form without the express permission from Robert Kaufman Fabrics. This pattern is not for resale. All patterns, unless otherwise attributed, are © Robert Kaufman Co., Inc. 2005-2021. All rights reserved.