k - fume extraction - en nsv4.0-2020
TRANSCRIPT
3
B
| Fume extraction | Extraction arms
FA.G
roup
_K.F
umeE
xtra
ctio
n.20
20.N
SV
4.0.
EN
YOGA - Extraction arms
Material St 37.2 black steel powder coated, galvanized structure, PVC flexible hoses
Structure Swivel with integrated shut-off damper,Plastic hood with integrated handle,Pipe segments with integrated frictional joints,Gas springs to balance the pipe segments.
Accessories
ight mounted on hoodWall bracket
YOGA - Extraction arms
welding fumes extraction as well as capturing fine dust particles. The pollutants are captured directly at the emission source, avoiding their expansion within the work space and of being inhaled by the workers.
The arms are manufactured in a hanging or standing version in different lengths.
The extraction arms can work independently, with a single extraction fan or it canbe connected to a main ductwith with a central extraction fan.
These extraction arms are produced according to the following harmonized directives/standards :- 2006/42/EC ; Machine directives
Volumes
Model Code Dn L A B C Weight
(mm) (mm) (mm) (mm) (mm) (kg)
6302200 960230030002300 790
22.0200 2300 790200200
4
A
| Fume extraction | Extraction arms
FA.G
roup
_K.F
umeE
xtra
ctio
n.20
20.N
SV
4.0.
EN
YOGA - Extraction arms
YOGA - Extraction arms reach dimensions
Hanging version Standing version
Model K L M N K L M N
(mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm)
2300 2400 600 2000 2200 02200 3200 32002700 3700 3000
B
| Fume extraction | Extraction arms
FA.G
roup
_K.F
umeE
xtra
ctio
n.20
20.N
SV
4.0.
EN
Suction hood Standard model with integrated handle.
Wall support Wall support to mount extraction arm directly on a wall or structure.
Repalcement grillTo insure that no bigger particles are sucted in the arm.
YOGA - Extraction arms
For Code Dn S Weight
model (mm) (mm) (kg)
3.0320 4.6
200 340
Material St 37.2 black steel powder coated
Material
Material Wre mesh
For Code Z T H Weight
model group (mm) (mm) (mm) (kg)
330330 0.44
0.42
For Code Weight
model Group (kg)
6
A
| Fume extraction | Extraction arms
FA.G
roup
_K.F
umeE
xtra
ctio
n.20
20.N
SV
4.0.
EN
YOGEX - Extraction arms
Material onductive PU hoses,
Structure Full-rotation stainless steel swivel with stainless steel shut-off damper,Two stainless steel pipe segments with textolite frictional spacers joints,Conductive polyurethane hose sections with steel wire spiral,stainless steel gas springs.
Accessories
Wall bracket
YOGEX - Extraction arms
and gases arising during technological processes, in areas of explosion risk, where explosive atmosphere can occur, as a mixture
The devices guarantee high level of protection therefore they can
transported air is +70°C.
Earthing
ensure the conductivity of the whole and conduct the electrostatic discharges to the grounding of the installation with a superficial
6
These extraction arms are produced according to the following harmonized directives/standards :- 2006/42/EC ; Machine directives
Model Code Dn L A B C Weight
(mm) (mm) (mm) (mm) (mm) (kg)
947
YOGEX extraction arms are manufactured according to the ATEX 95 (2014/34/EC) directive and carry the Research Certificate No 737/Cw/001 issued by the Technical Supervision Office.
7
B
| Fume extraction | Extraction arms
FA.G
roup
_K.F
umeE
xtra
ctio
n.20
20.N
SV
4.0.
EN
Suction hood Standard model
Wall support Wall support to mount extraction arm directly on a wall or structure.
YOGA - Extraction arms
For Code Dn S Weight
model (mm) (mm) (kg)
3.0
Material
Material
For Code d D H Weight
model (mm) (mm) (mm) (kg)
330
Pressure loss on extraction arm type YOGEX
A
| Fume extraction | Extraction arms
FA.G
roup
_K.F
umeE
xtra
ctio
n.20
20.N
SV
4.0.
EN
YOGB - Extraction arms
Material hoses
Structure Swivel,Suction hood with shut-off damper,
-
Accessories
ight mounted on hoodWall bracket
YOGB - Extraction arms
welding dust and gas contamination, as well as other small dust
the contamination to expand in the process room, preventing it from being inhaled by people. The extraction arms can be applied in any areas where the workspace is limited.
small. The extraction arm can work independently, with a single extraction fan or connected to the main collecting ductwork with a central fan.
Volumes
Pressure loss on extraction arm type YOGB
9
B
| Fume extraction | Extraction arms
FA.G
roup
_K.F
umeE
xtra
ctio
n.20
20.N
SV
4.0.
EN
Model Code Ds Aiflow # of R min R max Weight
(mm) (m³/h) segments (mm) (mm) (kg)
3 2000
Model Code Ds Aiflow # of R min R max Weight
(mm) (m³/h) segments (mm) (mm) (kg)
2 20002 24003 3000
Model Code Ds Aiflow # of R min R max Weight
(mm) (m³/h) segments (mm) (mm) (kg)
YOGB - Extraction arms
A
| Fume extraction | Extraction arms
FA.G
roup
_K.F
umeE
xtra
ctio
n.20
20.N
SV
4.0.
EN
YOGB - Extraction arms
Suction hood
Wall support Wall support to mount extraction arm directly on a wall or structure.
For Code Dn S Weight
model (mm) (mm) (kg)
320 4.6
Material St 37.2 black steel powder coated
Material
For Code Z T H Weight
model group (mm) (mm) (mm) (kg)
340 0.72
Repalcement grillTo insure that no bigger particles are sucted in the arm.
Material Wre mesh
For Code Weight
model group (kg)
B
| Fume extraction | Extraction arms
FA.G
roup
_K.F
umeE
xtra
ctio
n.20
20.N
SV
4.0.
EN
YOGF - Extraction arms
Material
Structure Swivel,Hood,Flexible hose sleeved over the supporting structure,Tension springs to balance the arm.
Accessories
ight mounted on hoodWall bracket
Volumes
YOGF - Extraction arms
are designed for dust and welding fume extraction, as well as the capturing of fine dust particles. The pollutants are captured directly at the emission source, avoiding their expansion within the room and inhaling by people.
provide convenient arm manoeuvring and position adjustment. The
the workspace.
Use a wall bracket to mount the arm on a wall or column.
to work independently or to connection ferrule to connect to the main collecting ductwork with a central fan.
A
| Fume extraction | Extraction arms
FA.G
roup
_K.F
umeE
xtra
ctio
n.20
20.N
SV
4.0.
EN
Model Code Dn L A B C Weight
group (mm) (mm) (mm) (mm) (mm) (kg)
2000 396 976 6.03000 3964000 396 9.0
YOGF - Extraction arms
Suction hood
Wall support Wall support to mount extraction arm directly on a wall or structure.
For Code Dn S Weight
model (mm) (mm) (kg)
320 4.6
Material St 37.2 black steel powder coated
Material
For Code Z T H Weight
model group (mm) (mm) (mm) (kg)
0.42
Repalcement grillTo insure that no bigger particles are sucted in the arm.
Material Wre mesh
For Code Weight
model group (kg)
B
| Fume extraction | Extraction arms
FA.G
roup
_K.F
umeE
xtra
ctio
n.20
20.N
SV
4.0.
EN
Model Code Connection Max torque Weight
group (mm) (Nm) (kg)
46.0
44006400
YOGA-RO-L/X - Extention arms
Material
Structure
made of aluminium cast rings with a roller bearing, the other rotational extensions have steel swivels with slide bearings.
YOGA-RO-L/X - Extention arms
arm has to be fastened at the end of the set consisting of two rotational extensions.
Pressure loss on extension arm type YOGA-RO
A
| Fume extraction | Extraction arms
FA.G
roup
_K.F
umeE
xtra
ctio
n.20
20.N
SV
4.0.
EN
YOGA-RO-L/X - Extention arms
be directly mounted on to the wall.
B
| Fume extraction | Extraction arms
FA.G
roup
_K.F
umeE
xtra
ctio
n.20
20.N
SV
4.0.
EN
YOGA-RO-L/X - Extention arms
A
| Fume extraction | Extraction arms
FA.G
roup
_K.F
umeE
xtra
ctio
n.20
20.N
SV
4.0.
EN
Segment connector Wall and ceiling supports Terminal stopper
YOGA-KOS-AL - Rail system for extraction arms
Material 2m or 4m aluminum rail segments with integrated rubber flaps
Structure
Accessories
Terminal stopper
YOGA-KOS-AL - Rail system for extraction arms
several meters long and can be operated by one or two extraction
the trolley along the suction rail. The hood of the arm ought to
movement resistances of the trolley and easy adjustment of the
completed work at one welding post, close the shut-off damper
extraction arm. Two extraction arms can be installed at one suction duct simultaneously.
Model Picture Code description Segment length Section Weight
group (mm) (cm²) (kg)
Self-tighteningrail
2000 or 4000 290 9.7
Extraction armtrolley
- - 9.0
Design for extraction arms Ø160 of maximum 3 meters long.
B
| Fume extraction | Extraction arms
FA.G
roup
_K.F
umeE
xtra
ctio
n.20
20.N
SV
4.0.
EN
YOFAN - Extraction fans
Material ST37.2 powder coated steel housing
Structure The fan is composed of a housing, an impeller and a motor. The radial
--
nect to the extraction fan wall support. The outlet is ended with a round ferrule to easily connect to a flexible or rigid conduit. For safety reason,
-ded to install a silencer at the fan inlet and outlet.
Accessories
Wall bracket
YOFAN - Extraction fans These fans are designed for local ventilation. They are installed
can overcome significant air flow resistances, they are particularly efficient within the systems of local exhausts.
Maximum temperature of the conveyed air is +60°C. Maximum temperature within the work area +40°C.
Maximum dust concentration of the conveyed air should not
- 2006/42/EC ; Machine directives
Model Code Speed Voltage Power Protection Noise level AirflowMax
VacuumWeight
(rpm) (V) (kW) (IP) (dB[A]) (m³/h) (Pa) (kg)
3000 230 0.37 9403000 3 x 400 0.37 9403000 230 0.373000 3 x 400 0.373000 2303000 3 x 4003000 230 23.03000 3 x 400 23.03000 3 x 400 3900 29.03000 3 x 400 2.2 2400 36.03000 3 x 400 3.0 62003000 3 x 400 64.03000 3 x 400 3300
Also available manufactured according to the ATEX 95 (2014/34/EC) directive.
A
| Fume extraction | Extraction arms
FA.G
roup
_K.F
umeE
xtra
ctio
n.20
20.N
SV
4.0.
EN
YOFAN - Extraction fans
Model A B C D E F G H J n x ØG
(mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm)
7.0 400 67.0 400 6
60 7.0 420 660 7.0 420 660 7.0 660 7.0 660 200 7.0 660 200 7.0 660 200 200 246 9.0 49060 200 200 246 9.0
274 9.0 670 232274 9.0 232
90 344 9.0
Dimensions
Curves
B
| Fume extraction | Extraction arms
FA.G
roup
_K.F
umeE
xtra
ctio
n.20
20.N
SV
4.0.
EN
YOGA-MINI - Extraction arms
Material PVC, polyamide and Stainless steel
Components Swivel with a vertical pipeThree adjustable pipe segments
Accessories
Table mount
YOGA-MINI - Extraction arms
remove dust and gas impurities arising in workplaces during processes of low emission of contamination in the chemical-, pharmaceutical-, electronic industries as well as in jewellery workshops. They can be mounted directly on the table top or to the side of the table with a table mount.
user can set the arm in the most convenient work position. The elements of the extraction arm are constructed of acid-proof materials.
he pipe of the swivel contains a shut-off damper and can make a full rotation around the vertical axis.
Suction point For point extraction.
Small hood
fume extraction.
Big hood
fume extraction.
Table mounting Easy table top side mounting with this support.
Model Reference Material Ø d Ø D L Weight
(mm) (mm) (mm) (kg)
PVC 70 -PVC - 200
64 7076 2006476 222 90 0.20
Table mount - 30
Model Work range Resistance d A B C D Weight
(mm) at 120 m³/h (Pa) (mm) (mm) (mm) (mm) (mm) (kg)
700 490 60900 220
Dimensions
Accessories
20
A
| Fume extraction | Extraction arms
FA.G
roup
_K.F
umeE
xtra
ctio
n.20
20.N
SV
4.0.
EN
LGF - Extraction arms
Material
Hoses
Accessories
Quick-coupling for hose extension
LGF - Extraction arms Cheap and versatile extraction arm mounted on a metal structure for wall mounting suitable for welding smoke, light dust and gases.
of the model.
positioning.
Quick coupling
coupling for extension hose.
Switch - hood Spotlight and start/stop-switch available.
Soldering hood Slant cut hood with built-in damper.
Gas springs
Model Reach Diameter # A B C Weight
(mm) (Ø mm) segments (mm) (mm) (mm) (kg)
2 -2 600 600 -
2000 2 -3000 2 -4000 2 -3000 34000 3 730
Ø Air speed 1m 2m 2m + 1m 2m + 2m 3m + 2m
(mm) (m³/h) Joint (Pa) Joint (Pa) Joint (Pa) Joint (Pa) Joint (Pa)
400600 60 70 220
60 70 220200 60 70 220
Performance table for cantilever joints for LGF (ø80 - ø200 mm) as well as range:
B
| Fume extraction | Extraction arms
FA.G
roup
_K.F
umeE
xtra
ctio
n.20
20.N
SV
4.0.
EN
LGF - Extraction arms
Extension Reach Diameter # A B C Weight
model (mm) (Ø mm) segments (mm) (mm) (mm) (kg)
- -- -
2 -2 -2 -2 -
Performance curve for LGF 1000 - 4000 (ø80 - ø200 mm) :
22
A
| Fume extraction | Extraction arms
FA.G
roup
_K.F
umeE
xtra
ctio
n.20
20.N
SV
4.0.
EN
RGF - Extraction arms
Material
Hose
Accessories
Quick-coupling for hose extension
RGF - Extraction arms Versatile extraction arm mounted on a metal structure and integrated wall support for wall mounting suitable for welding smoke, light dust and gases.
of the model.
positioning.
Quick coupling
coupling for extension hose.
Switch - hood Spotlight and start/stop-switch available.
Built-on fan Possibility to mount fan directly on wall support.
Ceiling mounting
extension up to 2 metres. Can revolve 360°.
Model Reach Diameter # A B C Weight
(mm) (Ø mm) segments (mm) (mm) (mm) (kg)
2 -2 -2 -2 -2 -
Ø Air speed 2m 2m + 1m 2m + 2m 3m + 2m
(mm) (m³/h) Joint (Pa) Joint (Pa) Joint (Pa) Joint (Pa)
400600 70 220
70 220200 70 220
Performance table for cantilever joints for RGF (ø80 - ø200 mm) as well as range:
23
B
| Fume extraction | Extraction arms
FA.G
roup
_K.F
umeE
xtra
ctio
n.20
20.N
SV
4.0.
EN
RGF - Extraction arms
Extension Reach Diameter # A B C Weight
model (mm) (Ø mm) segments (mm) (mm) (mm) (kg)
- -- -
2 -2 -2 -2 -
Performance curve for RGF 1000 - 4000 (ø80 - ø200 mm) :
24
A
| Fume extraction | Extraction tables
FA.G
roup
_K.F
umeE
xtra
ctio
n.20
20.N
SV
4.0.
EN
YOTA - Suction tables
Material
Construction
YOTA - Suction tables Extraction table with standard extraction by table top. Can be used as glueing, grinding, polishing, welding or as manual cutting table.
filter unit must be connected and ajdjusted. Connection of piping to table is optional on either the right or left side.
Multiple versions are available :YOTA - Standard executionYOTA-BYOTA-BSwithout noise damping.YOTA-BS-ISOwith noise damping.YOTA-EM - top with extraction 30° angled, light in top, lamellas along the side as well as on/off-switch for table light.
Model Air volume Delta P extr. surf. A B C D 1) E F ØG H I Weight
(m³/h) (Pa) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (kg)
600600 200
2340 600 640 x 2000 20002900 600 200.0
600 640 x 3000 3000 240.0600 930
2400 600 200 9303200 600 2000 930 200.04000 600 930
600 3000 930 300.0
Dimensions YOTA
B
| Fume extraction | Extraction tables
FA.G
roup
_K.F
umeE
xtra
ctio
n.20
20.N
SV
4.0.
EN
Adjutable height Easily change the heigth of the work station.
Sturdy construction strong work surface for grinding and sanding.
Dust containerEasy access for dust removal.
Options
are optional as well as the lighting.
YOTA - Suction tables
Additional equipement for YOTA suction tables (above)
Code Description
group
Options for YOTA suction tables
26
A
| Fume extraction | Extraction tables
FA.G
roup
_K.F
umeE
xtra
ctio
n.20
20.N
SV
4.0.
EN
YOTA - Suction tables
Model Air volume Delta P extr. surf. A B C D 1) E F ØG H I Weight
(m³/h) (Pa) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (kg)
600600 200
2340 600 640 x 2000 2000 240.02900 600 300.0
600 640 x 3000 3000 360.0600 930
2400 600 200 9303200 600 2000 9304000 600 930
600 3000 930 420.0
Dimensions YOTA-B
Model Air volume Delta P extr. surf. A B C D 1) E F ØG H I Weight
(m³/h) (Pa) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (kg)
600600 200
2340 600 640 x 2000 20002900 600 423.0
600 640 x 3000 3000600 930 200.0
2400 600 200 930 292.03200 600 2000 9304000 600 930 474.0
600 3000 930
Dimensions YOTA-BS
27
B
| Fume extraction | Extraction tables
FA.G
roup
_K.F
umeE
xtra
ctio
n.20
20.N
SV
4.0.
EN
YOTA - Suction tables
Model Air volume Delta P extr. surf. A B C D 1) E F ØG H I Weight
(m³/h) (Pa) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (kg)
600600 200 267.0
2340 600 640 x 2000 20002900 600 437.0
600 640 x 3000 3000600 930 206.0
2400 600 200 9303200 600 2000 930 396.04000 600 930
600 3000 930
Dimensions YOTA-BS-ISO
Model Air volume Delta P extr. surf. A B C D 1) E F ØG H I Weight
(m³/h) (Pa) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (kg)
600600 200 200.0
2340 600 640 x 2000 2000
Dimensions YOTA-EM
A
| Fume extraction | Extraction tables
FA.G
roup
_K.F
umeE
xtra
ctio
n.20
20.N
SV
4.0.
EN
YOTAPR - Suction tables
Material
Construction
Construction :
YOTAPR - Suction tables Universal extraction table with built-in fan. Can be used as glueing, grinding, polishing, welding or as manual cutting
smoke separation. Meets the class M fliter norm according to The cleaning is ensure manually by roto-cleaning.
fitted with silencer.
Multiple versions are available :YOTAPR - Standard execution.YOTAPR-BYOTAPR-BSsides without noise damping.YOTAPR-BS-ISOand sides with noise damping.
Model A B C D 3) E F ØG H I J
(mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm)
2000 2326
3000 3636
2000 2326
3000 3636
YOTAPR
Model Fan Inst. power Air volume Delta P extr. surf. Weight
model (kW) (m³/h) (Pa) (mm) (kg)
VF 2000VF 2000
2.2 220.02000 290.
2.2 2400VF 2000 200.0VF 2000 230.0
2.2 700 x 2000
2.2 700 x 3000 360.0
29
B
| Fume extraction | Extraction tables
FA.G
roup
_K.F
umeE
xtra
ctio
n.20
20.N
SV
4.0.
EN
Options
are optional as well as the lighting.
Dust containerEasy access for dust removal.
Integrated fan delivered as a standard.
Wooden slats The table is standard delivered with wooden slats.
YOTAPR - Suction tables
Additional equipement for YOTAPR suction tables (above)
Code Description
group
Mounting of fluorescent lighting fitting in hinged top
Options for YOTAPR suction tables
30
A
| Fume extraction | Extraction tables
FA.G
roup
_K.F
umeE
xtra
ctio
n.20
20.N
SV
4.0.
EN
YOTAPR - Suction tables
Model A B C D 3) E F ØG H I J
(mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm)
2004 2326
3004 3636
2004 2326
3004 3636
YOTAPR-B
Model Fan Inst. power Air volume Delta P extr. surf. Weight
model (kW) (m³/h) (Pa) (mm) (kg)
VF 2000VF 2000
2.2 300.02000 390.0
2.2 2400VF 2000 240.0VF 2000 290.0
2.2 700 x 2000
2.2 700 x 3000
Filter media :
Model Type Material Application
StandardPolyester flake with PFPT-
coating, antistaticStatic-loaded or hygroscopic particles
optionalPolyester flake with teflon
membrane, antistaticFiner static-loaded dust sorts
The filters meet demands for extraction degree for dust class M according to DIN EN 60335-2-69 Appendix AA (extraction degree > 99.9%).
Dimensions YOTAPR-B
B
| Fume extraction | Extraction tables
FA.G
roup
_K.F
umeE
xtra
ctio
n.20
20.N
SV
4.0.
EN
YOTAPR - Suction tables
YOTAPRBS
Model Fan Inst. power Air volume Delta P extr. surf. Weight
model (kW) (m³/h) (Pa) (mm) (kg)
VF 2000 222.0VF 2000 274.0
2.22000
2.2 2400 470.0VF 2000 260.0VF 2000
2.2 700 x 2000
2.2 700 x 3000
Model A B C D E F ØG H I J
(mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm)
790790
2030 790 2326790
3030 790 3636
2030 2326
3030 3636
YOTAPRBSISO
Model Fan Inst. power Air volume Delta P extr. surf. Weight
model (kW) (m³/h) (Pa) (mm) (kg)
VF 2000 227.0VF 2000
2.2 332.02000 427.0
2.2 2400VF 2000 266.0VF 2000
2.2 700 x 2000466.0
2.2 700 x 3000
Dimensions YOTAPRBS & YOTAPRBSISO
32
A
| Fume extraction | Extraction walls
FA.G
roup
_K.F
umeE
xtra
ctio
n.20
20.N
SV
4.0.
EN
YOKO - Suction walls
Material
Accessories
YOKO - Suction walls
gases and lighter dusts arising during processes or handling.
placed on a flat firm surface
Advantages
High suction levelNo wear, no parts replacement
Model A
backside for maximum work space.
Model B
backside for optimal air flow.
Connection stub Connection piece diameter
Side wallsSide Walls are available for higher efficiency.
Model Model A B C D E F
A B (mm) (mm) (mm) (mm) (mm) (mm)
720 400720 400 0400720 400
400 200200 600
Model Model Min. Delta P Weight
A B (m³/h) (Pa) (kg)
300 300400 300 24
300300 44300
Dimensions
33
B
| Fume extraction | Extraction walls
FA.G
roup
_K.F
umeE
xtra
ctio
n.20
20.N
SV
4.0.
EN
YOKO - Suction walls
Working principle of flow through YOKO suction walls :
OUTLET
Air intake zone
OUTLET
Air intake zone
YOKO - Suction wall with slanted sides
Model Model Min. Delta P Weight
A B (m³/h) (Pa) (kg)
300 300400 300 24
300300 44300
34
A
| Fume extraction | Extraction walls
FA.G
roup
_K.F
umeE
xtra
ctio
n.20
20.N
SV
4.0.
EN
YOKO-L - Suction walls
Material
Construction
las for efficient capture velocity
YOKO-L - Suction walls
fumes, gases and lighter dusts arising during processes or handling such as grinding, milling or powder mixing.
surface.
Advantages
High suction levelNo wear, no parts replacement
Model Air volume Pressure loss A B Ø C D E F Weight
(m³/h) (Pa) (mm) (mm) (mm) (mm) (mm) (mm) (kg)
900 66 22.033.0
2003 200 203 42.0
Dimensions
B
| Fume extraction | Extraction walls
FA.G
roup
_K.F
umeE
xtra
ctio
n.20
20.N
SV
4.0.
EN
YOKO-P - Suction walls
Material
Options
YOKO-P - Suction walls
volatile fumes and lighter dusts arising during processes.
steel lamellas or paintstop-fitlers.
surface.
Advantages
High suction levelNo wear, no parts replacement
Model Air volume 1)Delta P
Start/stopOutlet Ø A B C D Weight
(m³/h) (Pa) (mm) (mm) (mm) (mm) (mm) (kg)
200 300
Choose in options
2700 200 3003600 2000 300
20007200 400 2000 2000
30003000 600 2000
Dimensions
Model Description Size
Section height: 900mm
Filter cassette with paintstop-filter
Steel cassette for frontal mounting as additional cassette on panel
Steel cassette for frontal mounting as additional cassette on panel- Paintstop-filter
Steel cassette for mounting in front as additional cassette on panel - Steel lamellas
Options
36
A
| Fume extraction | Extraction walls
FA.G
roup
_K.F
umeE
xtra
ctio
n.20
20.N
SV
4.0.
EN
FAIRCAB suction walls
FAIRCAB suction wallsSuction walls with integrated polyester cartridges for painting booths.
cleaning system regulated by differential pressure monitoring, they
These suction walls are produced according to the following harmonized directives/standards :- 2006/42/EC ; Machine directive
Advantages
standard static cartridges- Easy access to the filter cartridges and cleaning system through the access doors- The removable front lattice door prevent dust return towards the booth when compressed air cleaning is activated- Possibility to have the fan mounted on the floor next to the booth.
Model#of
Filter surface
Airflowmax.
fantype
Motorpower
# of
Airconsumption
#of
Dimensions(mm)
cartridges (m²) (m³/h) (kW) valves (Nl/min) buckets L l H4 7000 2 24006 3 2 2020 2400
4 2 2020 2400
260 3 24006 3 2400
364 7 4 3940 240029000 4 3940 2400
MaterialPowder coated steel.
TypeFully welded plates.Polyester cartridges.
Options
- Consultations to have the booth adapted to your needs
37
B
| Fume extraction | Extraction walls
FA.G
roup
_K.F
umeE
xtra
ctio
n.20
20.N
SV
4.0.
EN
FAIRCAB suction walls
Front side, cartridge access through the frontal grills Back side, clean air access throught the side inspection door
View from the inside of the paint booth with the integrated wall Suction wall with fan mounted, fully integrated in paint booth