kaltband ag
TRANSCRIPT
Kaltband aGUnterwerkstrasse 3 | CH-5734 Reinach | Tel. +41 (0)62 765 99 99 | Fax +41 (0)62 765 99 00
www.kaltband.ch | [email protected]
HistoryKaltband aG was founded by Friedrich lüthi senior in 1966. He successfully ruled the company with much commitment and enthusiasm. His visions and worth still apply today. in 1979, the second genera-tion took over the company.
todayas a manufacturer of demanding cold rolled pro-ducts, Kaltband aG has found itself on the inter-national market. offering the best possible prices, quality and service are our top priorities in order to obtain the best customer satisfaction.lasting environmental protection and safety in the workplace are both major concerns and an element of yielding performance.We can count on our skilled manpower, those who manufacture high-quality products for our customers.
Kaltband aG
FutureContinuous care of our relationship and above average customer satisfaction should remain our primary objective. our suppliers are our partners. We treat them fairly and pursue a long-term col-laboration. We count on inventive customers and suppliers as well. Future investments will be objec-tive oriented as well as environmentally friendly and will also contribute to quality improvement.
We have much work ahead of us.
the Management
Michael lüthi
anne-rose Maurer
Friedrich Lüthi sen.
1919 – 1990
cold rolled strip steelavailable qualitiescold rolleddC 01 to dC 04 [st 2 to st 4]versions: a, lC (lG) to C690 [K70]
carburising steelCk 10, Ck 15, 15 Cr 1, 15 Cr 3,16 Mn Cr 5 and similar
hardenable spring steels and special alloys:Ck 20 to Ck 101, 51/58 Cr v 442 Cr Mo 4, 50 Cr Mo 4, 125 Cr 1, 125 Cr1 pin pointC80 W1/W2 and similar, 67 si Cr 5, 75 ni8
ball-bearing-steel:100 Cr 6
overall size ranGe oF steel stripsthickness: 0,2 – 7,0 mmcoil weight: ~10 kg / mm band widthwidth range: 6,0 – 600 mmcut lengths: 1,5 – 4,0 meters
appliCationssurgical blades, ribbon band saws, chain saws,jig saws, bi-metal saws, textile needles,clutch springs, fine blanking applications, furniture hinges, industrial chains, automotive timing chains, etc.
cold rolled strip steel
overall size ranGe in MM
produCt ranGe
tHiCKness toleranCes in MM
tHe FolloWinG edGe Conditions are available
slit rectangular
chamfered
tickness tickness
2 + 3 against surcharge
max. width min. widthtickness tickness
2 + 3 against surcharge
max. width min. width
full round
hardened & tempered products
standard qualitiesCK 67 - CK 101, 67 si Cr 5, 125 Cr 1, 100 Cr 6, 75 ni 8, 51 Cr v 4 other qualities upon request
surFaCe Condition– bright polished– bright grinded– blue polished– gold polished– scaleless blue
bimetal strips
overall width range: 8,00 mm – 83 mm, tickness range 0,5 – 2,5 mmnon standard dimension on request
dimension of backing and edge wire can be adapted to customers needs
bimetal strips
CoMMonly used quality pairinGsaisi 6135 / M2 aisi 6135 / Matrix ii aisi 6150 / M2 aisi 6150 / Matrix ii d6a / Matrix ii d6a / M42 d6a 3% Cr / M42d6a 3% Cr / M51 X32 CrMov4-1 / M42 X32 CrMov4-1 / M51
appliCationshole saws, jig saws, pneumatic sawssaber saws, power hack saws, band saws
standard qualitiesaisi 6135 aisi 6150 aisi 6150 Mo X46 Cr Mo v 4 (aisi d6a) d6a 3% Cr X32 Cr Mo v4-1
Hss qualitiesM2 (Hs 6-5-2) M3 t1 (Hs 6-6-2) M35 (Hs 6-5-2-5) Matrix ii (Hs 1-5-1-8) M 42 (Hs 2-9-1-8) M 51 (Hs 10-4-3-10)
art & technoloGy
larGe size art in aCryliC or oil on Canvas requires eMpatHy, CoMpleX
perspeCtive and proFessional sKills. siMilarly is tHe CoMMitMent oF
our speCialists and proFessionals to aCHieve teCHnoloGiCal eXCel-
lenCe and innovation.
tHe draWinGs sHoWn in tHis broCHure are sKetCHes WHiCH Were later
Made into larGe-size aCryliC paintinGs on Canvas.
tHe artist, MarKus lanGborn in 1965 in Menziken, switzerland, with a degree and training as retoucher and lithogra-pher, furthered is education at the university of arts and Crafts in zurich. influenced by his long travels around the world, these impressive images emerged and became a bridge and link between substance and spirituality.
art & technoloGy
Kaltband aGunterwerkstrasse 3 | CH-5734 reinach | tel. +41 (0)62 765 99 99 | Fax +41 (0)62 765 99 00www.kaltband.ch | [email protected]
sister companies:metallband italiana s.r.l.
via ripamonti 286 | 20141 Milano | tel./Fax +39 02 531 820 | [email protected]
Kaltband north america inc.
3750 north lake shore drive | Chicago, illinois 60613 usa | toll free 866 Kaltband phone +1 773 248 6684 | Fax +1 312 948 2601 [email protected] | www.kaltbandna.com | [email protected] proudly produced in Switzerland