key benefits of our prefabricated chimneys · “the benefits of real brick slip chimneys include...
TRANSCRIPT
Masonry Solutions (UK) ltd Seaton House Wilnecote Lane
Belgrave Tamworth Staffs B77 2LE
t: 01827 250236 f: 01827 280765 e: [email protected]
Key benefits of our Prefabricated Chimneys
Flexibility of design sizes
Brick slips cut from bricks of building
Lightweight
One piece, easy to fit
Cost effective
Off site fabrication
Full take off and scheduling service
Can be used with a class 1 or 2
working flue
Chimney Types
Mid Ridge
Gable End
Mono Pitch
Flat Roof
Pitched to flat roof
Our Real Brick Slip Chimneys
provide a time saving & cost effec-
tive solution of adding a chimney to
a new or existing property.
The chimneys are lightweight, sim-
ple to install and use 25mm slips
cut from the facing brick of the
building, ensuring an exact match
to the main brickwork.
The Chimney is manufactured with
a GRP base providing a water tight
structure, this is then clad in 25mm
Brick Slips using a polyurethene
adhesive.
A flashing channel is included for
quick & easy lead flashing and
complete weather-proofing.
Installed as an aesthetic detail
o r w o r k i n g m o d e l o u r
chimneys will provide the solution
and can be produced with a Pre-
Installed Class 1 or Class 2 Flue for
connecting to a secondary heating
system.
The three most common chimney
types are illustrated on this page,
we also provide flat roof and
pitched to flat roof types as
standard.
We have a comprehensive range of
standard chimney types and sizes
available, however due to our
unique manufacturing process we
can produce ‘bespoke’ Chimneys
quickly and economically. Please
refer to our Sales Office for details.
The Chimneys have been fully inde-
pendently tested by ‘CERAM’ the
UKs leading construction materials
test house and a full test report is
available upon request.
“The benefits of real brick
slip chimneys include the
complete flexibility of
design, easy installation
and the option of using a
class 1 or 2 working flue.”
Standard Brick Slip Chimney Range
Lichfield - 665mm x 440mm x 965-1190mm high
Norbury - 777mm x 552mm x 965-1190mm high
Henley - 777mm x 777mm x 965-1190mm high
Oxford - 890mm x 665mm x 965-1190mm high
Sutton - 1002mm x 777mm x 965-1190mm high
All of the above are available as standard in either mid ridge, gable end
or mono pitch.
External finish,Capping and Pot Options;
Capping - Chimneys can be offered with a GRP Sandstone Effect Capping in a variety of colours or left
blank for on-site Mortar Flaunching.
Pots - We offer a standard 300mm Roll Top Pot (blanked off) in either GRP Terracotta Effect or Real terra-
cotta. We also offer the full range of Redbank Terracotta Pots.
External Finish - Brick or Stone Slip, GRP Render Effect or Block Clad for on-site rendering.
Chimney Check List
Chimney type
Size (W x D x H)
Roof pitch
Brick type/finish
Capping details
No of Pots & Type
Brick Corbel details
Technical CAD
Drawing for
approval & fix-
ing Instrutions
supplied with
every Chimney
order.