king’s cross focus products: station · focus products: intercrete ® 4802, intercrete 4850,...

1
Focus products: Intercrete® 4802, Intercrete® 4850, Intercrete® 4841 Location: London, United Kingdom Project owner: Network Rail Contractor: Laing O’Rourke / Costain JV ISO12944 environment: C3 King’s Cross station Case study 2012 Background Newly constructed plant rooms required a permanent waterproofing system in this busy London Station. The waterproofing had to be completed in time to allow heavy machinery to be installed in the room. The Client chose the Intercrete range for the job for its ease of use, ability to be applied on green concrete and fast curing properties. Intercrete 4850 was applied to prevent out- gassing and a fillet was installed around the perimeter with Intercrete 4802. Intercrete 4841 was then laid at 2mm thickness and sand was broadcasted into the surface to give it a slip resistant finish. The solution Within a space of four days the slab was cast and waterproofing completed in rapid time frame, with heavy machinery installed before schedule. international-pc.com ® Registered trademark of AkzoNobel in one or more countries. © 2018 Akzo Nobel N.V.

Upload: others

Post on 17-Aug-2020

3 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: King’s Cross Focus products: station · Focus products: Intercrete ® 4802, Intercrete 4850, Intercrete® 4841 Location: London, United Kingdom Project owner: Network Rail Contractor:

Focus products: Intercrete® 4802, Intercrete® 4850, Intercrete® 4841

Location: London, United Kingdom

Project owner: Network Rail

Contractor: Laing O’Rourke / Costain JV

ISO12944 environment: C3

King’s Crossstation Case study 2012

Background

Newly constructed plant rooms required a permanent waterproofing system in this busy London Station. The waterproofing had to be completed in time to allow heavy machinery to be installed in the room. The Client chose the Intercrete range for the job for its ease of use, ability to be applied on green concrete and fast curing properties. Intercrete 4850 was applied to prevent out-gassing and a fillet was installed around the perimeter with Intercrete 4802. Intercrete 4841 was then laid at 2mm thickness and sand was broadcasted into the surface to give it a slip resistant finish.

The solution

Within a space of four days the slab was cast and waterproofing completed in rapid time frame, with heavy machinery installed before schedule.

international-pc.com® Registered trademark of AkzoNobel in one or more countries. © 2018 Akzo Nobel N.V.