kirloskar fire fighting pumps and...
TRANSCRIPT
FIRE PROTECTION PUMP PACKAGES
KIR
LO
SK
AR
BR
OT
HE
RS
LIM
ITE
D
ST
UD
IO M
AR
S P
VT. LT
D
As we are constantly endeavouring to improve the performance of our products/ equipment, we reserve the right to make alterations from time to time and as such our products/ equipment may differ from that detailed in this publication. For latest information you may get in touch with our Regional Sales Offices.
KIRLOSKAR BROTHERS LIMITEDCORPORATE OFFICE :Udyog Bhavan, Tilak Road, Pune - 411 002 (India)Phone : (020) 2444 0770FAX : (020) 2444 0156 / 2444 0816Email : [email protected] Site : www.kbl.co.in, www.kirloskar.comWORKS : KIRLOSKARVADI 416 308. DIST. SANGLIPHONE : (02346) 222301-5 FAX : (02346) 222311
Enquiries may be directed to the nearest Sales Office.India: Ahmedabad, Bangalore, Baroda, Bhubaneswar, Kolkata, Chennai, Jaipur, Kochi, Lucknow, Mumbai, Nagpur, New Delhi, Pune, Ranchi, Secunderabad.Overseas: Ajman, Cairo, Frankfurt, Johannesburg, Nairobi, Phnom Penh, UAE, Vientiane
KIRLOSKAR FIRE FIGHTING PUMPS AND PACKAGES
NFPA 20 Fire Pumpset International Standards and Approvals
Applications
Commercial complexes
High rise buildings
Airports and ports
Oil and Gas on shore and off shore platforms
Petroleum and Petrochemical complexes
Power stations and transformer stations
Warehouses
Manufacturing and Chemical Industry
Most of the countries stipulate that the fire pumps to meet the
standards issued by the National Fire Protection Association –
USA. KBL designs the fire pumpsets as per NFPA –20
specifications to meet the stringent fire safety norms and at
the same time for cost effectiveness.
Apart from NFPA many valued customers require that pumps
and controllers are also approved and listed by world
renowned fire certifying agencies such as Factory Mutual (FM)
or Underwriters Laboratories (UL). Our pumping systems are
manufactured and exhaustively tested in compliance with
stringent approval standards set by these agencies. With
these international approvals a fire pump system has greater
reliability in preventing damage to property in case of fire.
Controllers
To ensure that the package meets the quality norms of the NFPA
and FM/UL Standards and to have total compatibility controllers are
sourced from experienced and reliable manufacturers who follow
similar specifications and processes.
Controllers for electrical motor driven fire pumps are available for
various methods of starting. These include Direct on line, Star-delta,
Auto-transformer, Soft start etc..Packaged Diesel Engine driven
pumpsets incorporate 12V or 24V DC controller.
Controllers can be supplied free standing or mounted on the base
plate, completely wired and connected to the pump package.
Jockey Pump with Controller
It consists of compact inline vertical jockey
pump with controller mounted on a common
skid or a separate skid, where controller is FM
approved or UL listed.
Delivery Size upto : 100mm3Capacity : 75 m / hr
Head upto : 220 m
PUMPS CONFORMING TO
ULRR
NFPARR
TACFMAPPROVED
Pump controller
(KBL), the largest manufacturer and exporter of pumps in India is one of the leading solution providers
in the field of fluid handling in the world. The core competency lies in designing comprehensive solutions for complex fluid handling
problems. The captive foundry for producing special alloys for pump components for varied application, facilities for precision
machining and computerized testing and long term partnership with vendors add strength to KBL’s extensive infrastructure.
KBL has been supplying Fire Protection Pumps and Packages for many decades. The most important aspect of its fire protection
package is the reliability of fire pumping system to ensure adequate water supply at required pressure at the emergency conditions.
Kirloskar Brothers LimitedKirloskar Brothers Limited
KBL is having a wide range of pumps, ‘FR’ and ‘MSF’ series developed exclusively for fire-fighting applications.‘FR’ series are FM
approved and UL listed. MSF is UL listed.
Highlights of KBL Fire Pump Packages
Diesel engine driven pumpset
Main fire pump -FM approved / UL listed
Diesel engine - FM approved / UL listed heat
exchanger cooled
Engine Controller - FM approved / UL listed
Drive shaft
Secondary water-cooling loop
All above equipments are mounted on common skid.
Jockey pump with controller mounted on separate
skid where controller is FM approved or UL listedEngine drive split case pumpset
Main fire pump package motor driven set consists of following
Main fire pump - FM approved or UL listed
Motor - As per NFPA 20/ UL listed
Motor controller - FM approved or UL listed
All above equipments are mounted on a common skid
Electric Motor Driven Pumpset
CM
YK
PERFORMANCERated performance is of 1600 lpm at 7kg/ cm2, whileworking on 3m static suction lift, at NTP conditions.Maximum discharge exceeds upto 2000 lpm and maximumpressure upto 14kg/cm2.
PRIMINGThe proven exhaust gas ejector primer can lift water from adepth of 7.0 m in 30 sec., at NTP conditions.
APPLICATIONFire Brigades, Civil Defence, Godowns, Industries, Ports,
Underwater services, Builiding Mines etc.
CONSTRUCTIONAL FEATURESPUMPA single stage centrifugal pump is directly coupled to theengine and driven through a flexible coupling.
MaterialThe pump end is made of lightweight corrosion- resistantaluminium alloy and impeller is hard anodised for better wearresistant.Alternatively, the pump end can be offered in bronzeconstruction.
Shaft SealingA long life self- adjusting mechanical seal is fitted, whichconsists of a carbon ring rubbing on a stainless steel face.
Delivery and Suction ConnectionsThe pump has two delivery outlets of 21/2� with instantaneouscouplings and stainless steel screw down valves. The suctionis a 4� round threaded tube with a blank cap.
KIRLOSKAR - HIGH CAPACITY, PORTABLE, LIGHT WEIGHT,FIRE FIGHTING PUMPS - TYPE KPF -1600
ENGINEThe pump is powered by a four cylinder, four stroke watercooled 988cc engine. The engine is fully enclosed with noopen or unprotected moving parts.
PowerThe engine is adequately powered, with 37.3KW (50 HP)power output.
CoolingA closed circuit cooling system utilzes a heat exchanger ofadequate capacity to maintain the correct enginetemperatures. Due to this arrangement, the set is capableof running even at high ambient temperatures as high as+65oC
Fuel TankA stainless steel fuel tank of 13.6 litres capacity, adequateto allow pumping at the rated output for one hour continuousrated running. The empty fuel tank can be replaced with afresh full tank, without stopping the engine, therebypermitting continuous operation for an indefinite period.
StartingAn ignition switch and a push - button electronic startingdevice is provided with a fully protected high efficiencyalternator. A standby auxiliary hand recoil starter is alsoprovided for emergencies.
DIMENSIONS AND WEIGHTThe overall size of the whole unit, not the frame size only,measures :766 (L) mm X 501 (W) mm X 605 (H) mmDry Weight : 125 kg for standard aluminium alloyconstruction set, and 160 kg for bronze metal constructionset.(Note : The above weights include the electrical startingsystem with battery and the back-up hand starting device).
APPROVALS AND REGISTRATIONSa) The set generally conforms to IS : 12717/1989b) Tested by Bureau Veritasc) Tested by Lloydsd) Registered with CQAFEe) Tested by IRS
KIRLOSKAR VEHICLE MOUNTED FIRE PUMP - KVM 2270 F
RANGEPERFORMANCE- 2270 lpm at 7 kg /cm2 - 2450 rpm at 55 hp
[Suc.dia.100 mm . (4�)]- (Optional) 3300 lpm at 7 kg / cm2 - 2800 rpm at 90 hp
[Suc. dia.140mm (51/2�)]at 3m static suction lift (NTPcondition )
PRIMINGPriming is effected by means of automatic water ringprimer. The pump can prime water from a depth of 7.0m in 30 seconds through four lengths of suction hose2.5 m long, 100 mm dia (at NTP conditions)
CONSTRUCTIONAL FEATURES- Proven design.- Robust construction.
- Choice of 2,3 & 4 delivery outlets and can be offered inaluminium alloy and bronze material of construction fornormal water or saline water.
- Compatible with available chassis in India.- Easy availability / interchangeability of spare parts- Nationwide sales and after-sales service networkPUMP- The water pump is single stage centrifugal pump, coupled
to an engine through a power takeoff unit. The pumpbody is made of aluminium alloy and the impeller ishard anodised. Alternatively, the pump can be suppliedwith bronze body, impeller and in all bronze construction.
- The pump has the following connections (for std 2270lmp at 7 kg /cm2 )1No- 100 mm (4�)dia. round threaded suction with blankcap. 2 Nos -65 mm (21/2�) dia. instantaneous couplingwith screw - down valves.
The Kirloskar KPF-1600 is a self-contained petrol-enginedunit designed for continuous operation at the rated output. Itis capable of runinng at rated performance immediately afterstarting from cold.
Performance Curve of KVM 2270 of Pump