knürr synergy · strip for dust protected and concealed cabling (cover not required with mounted...

Technical Furniture

Knürr Synergy®

The New Product Family For Uniform Equipment In Your Control Room

Knürr Synergy®

The New Product Family Knürr offers a product family for uniform equipmentand furnishing in the control room in a full-coveragemodern design.In Knürr SynergyConsole®, Knürr SynergyWall® andKnürr SynergyCart® unmistakable design elementscomplement one another to provide user-oriented tech-nology. Everything functions as if from one single cast,and rounds off the image of a modern control or measu-ring station.

The modern Knürr Synergy® control room conceptactively contributes to increased efficiency. Less fati-gue, less back complaints and full employee concen-tration are the requirements for effective working in

2

The well-balanced contouring of the new Knürr SynergyConsole® offers ideal dimensions for monitor workstationsand supports the cockpit arrangement of flat screens.

The basic console is already manually height-selectable.The power-operated height-adjustable Knürr SynergyConsole® is a sit-stand workstation that optimally meetscurrent requirements and specifications. The control roomis consequently equipped for the future.

3

Knürr Synergy®

Knürr SynergyConsole®

Strong points 5Desk system 6Sit/Stand Workstation 8Single Desk 10Starter Desk 12Link-up/End Desk 14Middle Link-up Desk 16Add-on Desk 18Corner Piece 22Accessories 23

Knürr SynergyWall®

Strong points 28Complete Configuration 29Basic Frame 29Side Panel 30Cross Support 30Monitor Holder 31

Knürr SynergyCart®

Strong points 32Computer Trolley 33Laptop Trolley 34Equipment Trolley 35Basic Frame 36Worktop 37Keyboard Extension 38Drawer 38Cable Duct 39Tray Shelf 39Holder for PC Tower Enclosure 40Holder for Infusion Stands 40Transformer Tray 41Main Switch Module 41Cover Extrusion (cable duct) 42

4

Standards compliance and ergo-nomicsThe fully compliant ergonomic legspace enables free movement ofthe chair in the link-up area.Spacious 1,000 mm desk depth forplacing large monitors.Compliance with the latest stan-dards and specifications:- Manually height-selectable,

even in the basic version (650 –850 mm)

- Electric height-adjustable, from650 to 1250 mm

Manuelly height-selectable, evenin the basic versionEven height-selectable in the basicversion is manual via locking bolts,from 650 mm to 850 mm. The height is pre-mounted at thefactory and can be changed lateron.

Electric sit-stand setting- Running very quietly and

smoothly, the work height can beset individually and stepless bet-ween 650 and 1,250 mm

- Stepless height adjustment andquiet lifting mechanism with 4 lif-ting columns

- Individually programmable heightpositions and speeds for varioususers

- Intermediate stop and slow modewhen nearing end position

- Overload protection with indivi-dual current limiting

- In service cases: Fault identifica-tion with special codes, remote

diagnostics setup, automatic de-tection of drives, swapping outthe lifting columns during run-ning operation, free access fromoutside via the removable sidepanels

Ergonomic and robust desktopedge- Warm synthetic materials ensure

a pleasant surface temperature topositively influence the user’ssensation and perception on tou-ching and seeing the surface

- Durable and robust materials en-sure long service life

- The solid-colored material preclu-des visible damage

Ergonomically designed work-top shape- The worktop specially designed

for the Knürr SynergyConsole®

sit-stand model provides ideal di-mensions for monitor workstati-ons and supports the cockpitarrangement of desk monitors

Material mix synergiesWood as the material used and theErgoEdge desktop edge provide apleasantly warm surface and there-fore contribute to the employees’wellbeing.

Knürr SynergyConsole®

Strong points

SYN20041

SYN20031

5

The interface to the technology fea-ture robust aluminum and sheetsteel to guarantee reliability and fai-lure safety. The durable plastic capas the foot stabilizer’s end pieceprotects footwear and the stabili-zer’s surface coating, as it is made ofa robust but sufficiently soft mate-rial. The Knürr SynergyConsole®’sexceptional eco-balance is clearlyevident as all materials can be sepa-rated and recycled.

Cable routing- The side covers of the desk side pa-

nels and the front and rear coversof the technical pedestal can becompletely removed for cablingand installing equipment and devi-ces

- Hidden and dust-protected cableentry from the monitor right intothe technical pedestal

- Separate horizontal and verticalcable routing in cable basket traysand cable routing rings

- Cable duct bottom cover openingfrom the raised floor into the tech-nical pedestal or into the side pa-nels

- Spacious cable tray under theworktop for housing socket strips,switches and KVM extenders

- Cable chain pre-integrated into thesit-stand version in a side panel

- Spacious, two-way cable chainwith separator available for addi-tional cable routing between tech-nical pedestal and cable trough;can also be mounted on the rearpanel

Flat screen adaption- The docked monitor level with

cover for fixing flat screen holdersprovides space for additionalequipment and cables

- Also accessible with wall positio-ning

- The ergonomic monitor connec-tion with depth-adjustable flatscreen arms exclusively designedfor the Knürr SynergyConsole®

guarantees optimum viewing di-stances to the monitors

- Freely positionable monitor co-lumns for horizontal setting

- Freely positionable heights for flatscreen arms on the monitor co-lumns

Spacious technical pedestal- Excellent accessibility with remo-

vable front and rear covers- For accepting 19” frames, moun-

ting braces, chassis rails, compu-ters and further equipment withfull legroom in the width anddepth

- Cables can be routed via the cablebasket tray to the side panelsthrough generously dimensionedoutlets – separated for data andpower supply

- The mounting braces enable theindividual connection of non-stan-dard equipment

Modular constructionIndustrially produced modules canbe upgraded and added to at alltimes; available to buy for manyyears to comeAll installation modules are suitablefor both the basic version and thesit-stand version.

SYN20032SYN20033 SYN20029

6

Knürr Synergy®

Side panels- The combination of interconnec-

ting aluminum extrusions is thebasis for the variable desk heights

- Height setting in the basic versionis manual via locking bolts, from650 mm to 850 mm The height is pre-mounted at thefactory and can be changed lateron

- The electric-adjustable sit/standversion is fitted with 4 lifting co-lumns for a high load rating and astepless setting range from 650 to1,250 mm

- Easy to remove sheet steel coversensure good accessibility to cab-ling and lifting columns

- Welded stable sheet steel foot sta-bilizer for optimum stability; dura-ble plastic impact caps protectboth footwear and the foot stabili-zer

- Short foot stabilizers on the link-updesks enable optimum footroom

Desk tray- The spaciously dimensioned sheet

steel desk tray under the worktopensures high stability and providesplenty of space for switches, cablesand power supplies

- Good accessibility via the side pa-nels, from the rear and below viacut-outs

- Connection option for a spaciouscable chain, left and right

- With cover at the rear includingbrush strip for dust protected andout-of-view cabling (not requiredwith mounted monitor level)

WorktopsWorktops with the tried, testedand proven Ergo-Edge impact edgewith HP laminate surfaces enablehigh load ratings and ensure a longconsole desk service life.The worktops are continuous orcan be height-adjusted with lowe-ring monitor level from 0 mm to -30 mm, -70 mm and -100 mm viavariable position worktop stabili-zers. Monitor level depth: 400 mm.

FinishBasic frames:Vertical extrusions on the side pa-nels, desk tray, worktop stabilizers,monitor level, monitor columnsand flat screen holders: RAL 9006white aluminumCovers, foot stabilizer and footcaps: RAL 7021 dark grayWorktops:.1: Worktop coating in RAL 7035

light gray, ErgoEdge impactedge and veneer in RAL 7021dark gray.

.5: Worktop coating in beech de-sign, ErgoEdge impact edgeand veneer in RAL 7021 darkgray.

.9: Worktop coating in basalt grayErgoEdge impact edge and ve-neer in RAL 7021 dark gray.

Material- Vertical supports on the side pa-

nels, monitor level and monitorcolumns, extruded aluminum,powder-coated

- Covers, foot stabilizers, desk trayand flat screen holders sheet-steel, powder-coated.

- Plastic impact protection caps- Worktop: Three layer particle

board, FP / Y E1 version, fire pro-tection class B2

- Worktop coating: High pressureplastic laminate

Knürr SynergyConsole® Workstation System

SYN20042

SYN20034

7

Knürr Synergy®

Load ratingHeight-selectable version:1,500 N (static surface load)Electric height-adjustable version:1,200 N (static surface load)

Standards- DIN EN 527 office furniture,

office workstations- DIN EN ISO 11064 ergonomic de-

sign of control centers- DIN 68761 for worktops- EN 438 HGS class for high pressure

plastic laminate

- DIN Technical Report 147 – Requi-rements and tests of office furni-ture – Guideline for the securityrequirements on work tables andstorage furniture in Germany

Link-up systemAlways start connecting from theoutside left with starter desk orsingle desk.Add the modules you want as re-quired.

Add on DeskShortened PanelShort Stabilizer



Sta

rter

Des

k

Link up/End Desk

Sta

rter

Des

k

Middle Link upDesk

Link

-up/

End

Des

k

Add on DeskShortened PanelLong Stabilizer

Starter Desk

Cor

ner

Pie

ce

Cor

ner

Pie

ce

Cor

ner

Pie

ce

Sta

rter

Des

k

Middle Link upDesk

Cor

ner

Pie

ce

Link

-up/

End

Des

kC

orne

rP

iece


Sta

rter

Des

k

Middle Link upDesk

Cor

ner

Pie

ce


Link

-up/

End

Des

kC

orne

rP

iece

8

Knürr Synergy®

Continuous freeform worktop, ergonomicallyshaped for optimum viewing angle with flat-screen work, with ErgoEdge impact edge.The most modern lifting mechanism possible en-sures the worktop moves up and down quietlyand steplessIntelligent and hidden cable management.Patented ErgoEdge desk edge provides a pleasantsurface temperature.Modularity: Installation option for perforated rearpanel, technical pedestal or monitor level.Plenty of room for cables, switches and powersupplies in the generously dimensioned desk tray.Desk tray with cover at the rear including brushstrip for dust protected and concealed cabling(cover not required with mounted monitor level).

Material- Extruded aluminum side panel vertical sup-

ports, powder-coated- Sheet steel covers, foot stabilizer, desk tray

and worktop stabilizer, powder-coated- Plastic impact protection caps- Worktop: 30 mm three layer particle board,

FP / Y E1 version, fire protection class B2- Worktop coating: High pressure plastic la-

minate- Plastic ErgoEdge desk edge

FinishBasic frames:Side panel vertical extrusions, desk tray andworktop stabilizer: RAL 9006 white alumi-numCovers, foot stabilizer and foot caps: RAL7021 dark gray

Worktops:.1: Worktop coating in RAL 7035 light gray,

ErgoEdge impact edge and veneer inRAL 7021 dark gray

.5: Worktop coating in beech design, Ergo-Edge impact edge and veneer in RAL7021 dark gray.

.9: Worktop coating in basalt gray, Ergo-Edge impact edge and veneer in RAL7021 dark gray.

Load rating1,200 N (static surface load)

Height setting range650 mm to 1,250 mm, stepless

Supply schedule1 freeform worktop2 side panels with long foot stabilizer, work-

top stabilizers and lifting mechanism1 desk tray with rear cover1 control unit for height setting mechanismMounting material

How suppliedPreassembled modules

NoteAccessories (see figure) not included in sup-ply schedule

Knürr SynergyConsole® Sit-Stand Workstation

SYN20025

D W Wh Wv Order no. UP

800 1200 1239 1630 04.411.013.x 1 unit

800 1600 1639 2030 04.411.015.x 1 unit

800 1800 1839 2230 04.411.016.x 1 unit

800 2000 2039 2430 04.411.017.x 1 unit

1000 1200 1239 1630 04.411.113.x 1 unit

1000 1600 1639 2030 04.411.115.x 1 unit

1000 1800 1839 2230 04.411.116.x 1 unit

1000 2000 2039 2430 04.411.117.x 1 unit

SYN20082

Wh

Wv

W

Dimensions in mm: W= Width HU = Standard heightH = Height unit, 1 HU = 44.45 mmD = Depth 19”= 482.6 mm, h = Installation height (ideal for 19" components d = Useful depth in acc. with DIN 41494)L = Length UP = Unit of packaging

kg = Weight

Conversion: 1 mm = 0.03937 inch Replace "x" with the number of your 1 kg = 2.2046 pound color choice

D

9

Knürr Synergy®

Split worktop with ErgoEdge impact edge.Lowered in the monitor area; can be height-moun-ted from 0 mm to -30 mm, -70 mm and -100 mmvia variable position worktop stabilizer. Monitor surface depth: 400 mm.The most modern lifting mechanism possible en-sures the worktop moves up and down quietly andsteplessIntelligent and concealed cable management.Patented ErgoEdge provides a pleasant surfacetemperature.Modularity: Installation option for perforated rearpanel, technical pedestal or monitor level.Plenty of room for cables, switches and power sup-plies in the generously dimensioned desk tray.With cover at the rear including brush strip for dustprotected and out-of-view cabling (cover not re-quired with mounted monitor level).



and worktop stabilizer, powder-coated- Plastic impact protection caps- Worktops: 30 mm three layer particle

board, FP / Y E1 version, fire protection classB2

- Worktop coating: High pressure plastic la-minate

- Plastic ErgoEdge desk edge




.5: Worktop coating in beech design, Ergo-Edge impact edge and veneer in RAL7021 dark gray

.9: Worktop coating in basalt gray, Ergo-Edge impact edge and veneer in RAL7021 dark gray


Height setting range650 mm to 1,250 mm, stepless

Supply schedule1 worktop1 worktop for lowered level2 side panels with long foot stabilizer, split

worktop stabilizer and lifting mechanism1 desk tray with rear cover1 control unit for height setting mechanismMounting material


Knürr SynergyConsole® Sit-Stand Workstation with lowered monitor surface

D W Wh Wv Order no. UP

1000 1200 1239 1630 04.411.313.x 1 unit

1000 1600 1639 2030 04.411.315.x 1 unit

1000 1800 1839 2230 04.411.316.x 1 unit

1000 2000 2039 2430 04.411.317.x 1 unit

SYN20081

Wh

Wv

W

D

10

Knürr Synergy®

As single desk or for linking two desks via a cornerpiece.Provides full length foot stabilizer for the highestpossible anti-tilt and stability.Easy set desk heights via bolt locking in the sidepanels.Intelligent and concealed cable management.Patented ErgoEdge desk front edge provides apleasant surface temperature.Modularity: Installation option for perforated rearpanel, technical pedestal or monitor level.Plenty of room for cables, switches and powersupplies in the generously dimensioned desk tray.With cover at the rear including brush strip fordust protected and out-of-view cabling (cover notrequired with mounted monitor level).





minate- Plastic ErgoEdge desk front edge







Height setting range650 mm to 850 mm

Supply schedule1 worktop2 side panels with worktop stabilizer and

long foot stabilizer1 desk tray with rear coverMounting material


Knürr SynergyConsole® Single Desk

D W Order no. UP

800 600 04.410.010.x 1 unit

800 800 04.410.011.x 1 unit

800 1000 04.410.012.x 1 unit

800 1200 04.410.013.x 1 unit

800 1400 04.410.014.x 1 unit

800 1600 04.410.015.x 1 unit

800 1800 04.410.016.x 1 unit

800 2000 04.410.017.x 1 unit

1000 600 04.410.110.x 1 unit

1000 800 04.410.111.x 1 unit

1000 1000 04.410.112.x 1 unit

1000 1200 04.410.113.x 1 unit

1000 1400 04.410.114.x 1 unit

1000 1600 04.410.115.x 1 unit

1000 1800 04.410.116.x 1 unit

1000 2000 04.410.117.x 1 unit

SYN20092

SYN20090


kg = Weight


DW

11

Knürr Synergy®

As single desk or for linking two desks via a cor-ner piece.Provides full length foot stabilizer for the highestpossible anti-tilt and stability.Easy set desk heights via bolt locking in the sidepanels.Split worktop with ErgoEdge desk front edge.Lowered in the monitor area; can be height-mounted from 0 mm to -30 mm, -70 mm and -100 mm via variable position worktop stabilizer.Monitor surface depth: 400 mmIntelligent and concealed cable management.Patented ErgoEdge desk front edge provides apleasant surface temperature.Modularity: Installation option for perforatedrear panel, technical pedestal or monitor level.Plenty of room for cables, switches and powersupplies in the generously dimensioned desktray.With cover at the rear including brush strip fordust protected and out-of-view cabling (covernot required with mounted monitor level).



and split worktop stabilizer, powder-coated- Plastic impact protection caps- Worktops: 30 mm three layer particle

board, FP / Y E1 version, fire protectionclass B2


- Plastic ErgoEdge desk front edge

FinishBasic frames:Side panel vertical extrusions, desk tray andsplit worktop stabilizer:RAL 9006 white aluminumCovers, foot stabilizer and foot caps: RAL7021 dark grayWorktops:.1: Worktop coating in RAL 7035 light gray,






Supply schedule1 worktop1 worktop for lowered level2 side panels with long foot stabilizers and

with split worktop stabilizers.1 desk tray with rear coverMounting material


Knürr SynergyConsole® Single Deskwith lowered monitor surface

D W d Order no. UP

1000 600 600 04.410.310.x 1 unit

1000 800 600 04.410.311.x 1 unit

1000 1000 600 04.410.312.x 1 unit

1000 1200 600 04.410.313.x 1 unit

1000 1400 600 04.410.314.x 1 unit

1000 1600 600 04.410.315.x 1 unit

1000 1800 600 04.410.316.x 1 unit

1000 2000 600 04.410.317.x 1 unit

SYN20089

DWd

12

Knürr Synergy®

As first desk on the left with link-ups.Side panel on the right with shortened foot stabi-lizer for optimum footroom in the link-up area.

Easy set desk heights via bolt locking in the sidepanels.Intelligent and concealed cable management.Patented ErgoEdge desk front edge provides apleasant surface temperature.Modularity: Installation option for perforated rearpanel, technical pedestal or monitor level.Plenty of room for cables, switches and powersupplies in the generously dimensioned desk tray.With cover at the rear including brush strip fordust protected and out-of-view cabling (cover notrequired with mounted monitor level).













Supply schedule1 worktop1 left side panel with long foot stabilizer1 right side panel with shortened foot stabi-

lizer1 desk tray with rear coverMounting material


Knürr SynergyConsole® Starter Desk

D W Order no. UP

800 600 04.410.020.x 1 unit

800 800 04.410.021.x 1 unit

800 1000 04.410.022.x 1 unit

800 1200 04.410.023.x 1 unit

800 1400 04.410.024.x 1 unit

800 1600 04.410.025.x 1 unit

800 1800 04.410.026.x 1 unit

800 2000 04.410.027.x 1 unit

1000 600 04.410.120.x 1 unit

1000 800 04.410.121.x 1 unit

1000 1000 04.410.122.x 1 unit

1000 1200 04.410.123.x 1 unit

1000 1400 04.410.124.x 1 unit

1000 1600 04.410.125.x 1 unit

1000 1800 04.410.126.x 1 unit

1000 2000 04.410.127.x 1 unit

SYN20042

SYN20084


kg = Weight


DW

13

Knürr Synergy®

As first desk on the left with link-ups.Side panel on the right with shortened foot sta-bilizer for optimum footroom in the link-up area.Split worktop with ErgoEdge desk front edge.Lowered in the monitor area; can be height-mounted from 0 mm to -30 mm, -70 mm and -100 mm via variable position worktop stabilizer.Monitor surface depth: 400 mm.Easy set desk heights via bolt locking in the sidepanels.Intelligent and concealed cable management.Patented ErgoEdge desk front edge provides apleasant surface temperature.Modularity: Installation option for perforatedrear panel, technical pedestal or monitor level.Plenty of room for cables, switches and powersupplies in the generously dimensioned desktray.With cover at the rear including brush strip fordust protected and out-of-view cabling (covernot required with mounted monitor level).

Material- Extruded aluminum side panel vertical

supports, powder-coated- Sheet steel covers, foot stabilizer, desk tray

and split worktop stabilizer, powder-coated

- Plastic impact protection caps- Worktop: 30 mm three layer particle

board, FP / Y E1 version, fire protectionclass B2


- Plastic ErgoEdge desk front edge







Supply schedule1 worktop1 worktop for lowered level1 left side panel with long foot stabilizer and

split worktop stabilizer1 right side panel with shortened foot stabi-

lizer and split worktop stabilizer1 desk tray with rear coverMounting material


Knürr SynergyConsole® Starter Deskwith lowered monitor surface

D W D Order no. UP

1000 600 600 04.410.320.x 1 unit

1000 800 600 04.410.321.x 1 unit

1000 1000 600 04.410.322.x 1 unit

1000 1200 600 04.410.323.x 1 unit

1000 1400 600 04.410.324.x 1 unit

1000 1600 600 04.410.325.x 1 unit

1000 1800 600 04.410.326.x 1 unit

1000 2000 600 04.410.327.x 1 unit

SYN20085

DWd

14

Knürr Synergy®

For linking up or closing off after a corner piece.Can be further linked up with an add-on desk.Side panel on the left with shortened foot stabili-zer for optimum foot freedom in the link-up area.

Easy set desk heights via bolt locking in the sidepanels.Intelligent and concealed cable management.Patented ErgoEdge desk front edge provides apleasant surface temperature.Modularity: Installation option for perforated rearpanel, technical pedestal or monitor level.Plenty of room for cables, switches and power sup-plies in the generously dimensioned desk tray.With cover at the rear including brush strip for dustprotected and out-of-view cabling (cover not re-quired with mounted monitor level).






FinishBasic frames:Side panel vertical extrusions, desk tray andworktop stabilizer: RAL 9006 white alumi-numCovers, foot stabilizer and foot caps: RAL7021 dark grayWorktops:.1: Worktop coating in RAL 7035 light gray,

ErgoEdge impact edge and veneer in RAL7021 dark gray





Supply schedule1 worktop1 left side panel with shortened foot stabilizer1 right side panel with long foot stabilizer1 desk tray with rear coverMounting material


Knürr SynergyConsole® Link-up/End Desk

D W Order no. UP

800 600 04.410.030.x 1 unit

800 800 04.410.031.x 1 unit

800 1000 04.410.032.x 1 unit

800 1200 04.410.033.x 1 unit

800 1400 04.410.034.x 1 unit

800 1600 04.410.035.x 1 unit

800 1800 04.410.036.x 1 unit

800 2000 04.410.037.x 1 unit

1000 600 04.410.130.x 1 unit

1000 800 04.410.131.x 1 unit

1000 1000 04.410.132.x 1 unit

1000 1200 04.410.133.x 1 unit

1000 1400 04.410.134.x 1 unit

1000 1600 04.410.135.x 1 unit

1000 1800 04.410.136.x 1 unit

1000 2000 04.410.137.x 1 unit

SYN20093

SYN20083


kg = Weight


DW

15

Knürr Synergy®

For linking up or closing off after a corner piece.Can be further linked up with an add-on desk.Side panel on the left with shortened foot stabili-zer for optimum foot freedom in the link-up area.Split worktop with ErgoEdge desk front edge.Lowered in the monitor area; can be height-moun-ted from 0 mm to -30 mm, -70 mm and -100 mmvia variable position worktop stabilizer.

Monitor surface depth: 400 mm.Easy set desk heights via bolt locking in the sidepanels.Intelligent and concealed cable management.Patented ErgoEdge desk front edge provides apleasant surface temperature.Modularity: Installation option for perforated rearpanel, technical pedestal or monitor level.Plenty of room for cables, switches and power sup-plies in the generously dimensioned desk tray.With cover at the rear including brush strip for dustprotected and out-of-view cabling (cover not re-quired with mounted monitor level).



and split worktop stabilizer, powder-coated- Plastic impact protection caps- Worktop: 30 mm three layer particle board,




ErgoEdge impact edge and veneer in RAL7021 dark gray


.9: Worktop coating in basalt gray, ErgoEdgeimpact edge and veneer in RAL 7021dark gray



Supply schedule1 worktop1 worktop for lowered level1 left side panel with shortened foot stabili-

zer and split worktop stabilizers1 right side panel with long foot stabilizer

and split worktop stabilizer1 desk tray with rear coverMounting material


Knürr SynergyConsole® Link-up/End Deskwith lowered monitor surface

D W d Order no. UP

1000 600 600 04.410.330.x 1 unit

1000 800 600 04.410.331.x 1 unit

1000 1000 600 04.410.332.x 1 unit

1000 1200 600 04.410.333.x 1 unit

1000 1400 600 04.410.334.x 1 unit

1000 1600 600 04.410.335.x 1 unit

1000 1800 600 04.410.336.x 1 unit

1000 2000 600 04.410.337.x 1 unit

SYN20086

DWd

16

Knürr Synergy®

For linking-up between two corner pieces.Can be further linked up with an add-on desk.Side panel on the left and right with shortenedfoot stabilizer for optimum foot freedom in thelink-up area.













Supply schedule1 worktop2 side panels with shortened foot stabilizer1 desk tray with rear coverMounting material


Knürr SynergyConsole® Link-up Desk, Middle

D W Order no. UP

800 600 04.410.040.x 1 unit

800 800 04.410.041.x 1 unit

800 1000 04.410.042.x 1 unit

800 1200 04.410.043.x 1 unit

800 1400 04.410.044.x 1 unit

800 1600 04.410.045.x 1 unit

800 1800 04.410.046.x 1 unit

800 2000 04.410.047.x 1 unit

1000 600 04.410.140.x 1 unit

1000 800 04.410.141.x 1 unit

1000 1000 04.410.142.x 1 unit

1000 1200 04.410.143.x 1 unit

1000 1400 04.410.144.x 1 unit

1000 1600 04.410.145.x 1 unit

1000 1800 04.410.146.x 1 unit

1000 2000 04.410.147.x 1 unit

SYN20091

SYN20088


kg = Weight


DW

17

Knürr Synergy®

For linking-up between two corner pieces.Can be further linked up with an add-on desk.Side panel on the left and right with shortenedfoot stabilizer for optimum foot freedom in thelink-up area.

Split worktop with ErgoEdge desk front edge.Lowered in the monitor area; can be height-mounted from 0 mm to -30 mm, -70 mm and -100 mm via variable position worktop stabilizer.Monitor surface depth: 400 mm.Easy set desk heights via bolt locking in the sidepanels.Intelligent and concealed cable management.Patented ErgoEdge desk front edge provides apleasant surface temperature.Modularity: Installation option for perforated rearpanel, technical pedestal or monitor level.Plenty of room for cables, switches and powersupplies in the generously dimensioned desk tray.With cover at the rear including brush strip fordust protected and out-of-view cabling (cover notrequired with mounted monitor level).












Supply schedule1 worktop1 worktop for lowered level2 side panels with shortened foot stabilizer



Knürr SynergyConsole® Link-up Desk, Middlewith lowered monitor surface

D W d Order no. UP

1000 600 600 04.410.340.x 1 unit

1000 800 600 04.410.341.x 1 unit

1000 1000 600 04.410.342.x 1 unit

1000 1200 600 04.410.343.x 1 unit

1000 1400 600 04.410.344.x 1 unit

1000 1600 600 04.410.345.x 1 unit

1000 1800 600 04.410.346.x 1 unit

1000 2000 600 04.410.347.x 1 unit

SYN20087

DWd

18

Knürr Synergy®

For linking up after a starter or single desk.Can be further linked up with an add-on desk.Only with right side panel, long foot stabilizer forhighest possible stability. Worktop width shortened to maintain the clearwidth in linking. The installation modules there-fore stay in the modular dimension.













Supply schedule1 worktop1 right side panel with long foot stabilizer1 desk tray with rear coverMounting material


Knürr SynergyConsole® Add-On Desk, Long Stabilizer

D W Order no. UP

800 500 04.410.050.x 1 unit

800 700 04.410.051.x 1 unit

800 900 04.410.052.x 1 unit

800 1100 04.410.053.x 1 unit

800 1300 04.410.054.x 1 unit

800 1500 04.410.055.x 1 unit

800 1700 04.410.056.x 1 unit

800 1900 04.410.057.x 1 unit

1000 500 04.410.150.x 1 unit

1000 700 04.410.151.x 1 unit

1000 900 04.410.152.x 1 unit

1000 1100 04.410.153.x 1 unit

1000 1300 04.410.154.x 1 unit

1000 1500 04.410.155.x 1 unit

1000 1700 04.410.156.x 1 unit

1000 1900 04.410.157.x 1 unit

SYN20095

SYN20071


kg = Weight


D

W

19

Knürr Synergy®

For linking up after a starter or single desk.Can be further linked up with an add-on desk.Only with right side panel, long foot stabilizer forhighest possible stability. Worktop width shortened to maintain the clearwidth in linking. The installation modules there-fore stay in the modular dimension.







FinishBasic frames:Side panel vertical extrusions, desk tray andsplit worktop stabilizer:RAL 9006 white aluminum Covers, foot stabilizer and foot caps: RAL7021 dark grayWorktops:.1: Worktop coating in RAL 7035 light gray,






Supply schedule1 worktop1 worktop for lowered level1 right side panel with long foot stabilizer



Knürr SynergyConsole® Add-On Desk, Long Stabilizerwith lowered monitor surface

D W d Order no. UP

1000 500 600 04.410.350.x 1 unit

1000 700 600 04.410.351.x 1 unit

1000 900 600 04.410.352.x 1 unit

1000 1100 600 04.410.353.x 1 unit

1000 1300 600 04.410.354.x 1 unit

1000 1500 600 04.410.355.x 1 unit

1000 1700 600 04.410.356.x 1 unit

1000 1900 600 04.410.357.x 1 unit

SYN20070

D

W

d

20

Knürr Synergy®

For linking up after a starter or single desk.Can be further linked up with an add-on desk.Only with side panel on the right with shortenedfoot stabilizer for optimum footroom in the link-up area.Worktop width shortened to maintain the clearwidth in linking. The installation modules there-fore stay in the modular dimension.







FinishBasic frames:Side panel vertical extrusions, desk tray andworktop stabilizer: RAL 9006 white alumi-num Covers, foot stabilizer and foot caps: RAL7021 dark grayWorktops:.1: Worktop coating in RAL 7035 light gray,






Supply schedule1 worktop1 right side panel with shortened foot

stabilizer1 desk tray with rear coverMounting material


Knürr SynergyConsole® Add-On Desk, Short Stabilizer

D W Order no. UP

800 500 04.410.060.x 1 unit

800 700 04.410.061.x 1 unit

800 900 04.410.062.x 1 unit

800 1100 04.410.063.x 1 unit

800 1300 04.410.064.x 1 unit

800 1500 04.410.065.x 1 unit

800 1700 04.410.066.x 1 unit

800 1900 04.410.067.x 1 unit

1000 500 04.410.160.x 1 unit

1000 700 04.410.161.x 1 unit

1000 900 04.410.162.x 1 unit

1000 1100 04.410.163.x 1 unit

1000 1300 04.410.164.x 1 unit

1000 1500 04.410.165.x 1 unit

1000 1700 04.410.166.x 1 unit

1000 1900 04.410.167.x 1 unit

SYN20094

SYN20069


kg = Weight


D

W

21

Knürr Synergy®

For linking up after a starter or single desk.Can be further linked up with an add-on desk.Only with side panel on the right with shortenedfoot stabilizer for optimum footroom in the link-up area.Worktop width shortened to maintain the clearwidth in linking. The installation modules there-fore stay in the modular dimension.







FinishBasic frames:Side panel vertical extrusions, desk tray andsplit worktop stabilizer:RAL 9006 white aluminum Covers, foot stabilizer and foot caps: RAL7021 dark grayWorktops:.1: Worktop coating in RAL 7035 light gray,






Supply schedule1 worktop1 worktop for lowered level1 right side panel with shortened foot stabi-

lizer and split worktop stabilizer1 desk tray with rear coverMounting material


Knürr SynergyConsole® Add-On Desk, Short Stabilizerwith lowered monitor surface

D W d Order no. UP

1000 500 600 04.410.360.x 1 unit

1000 700 600 04.410.361.x 1 unit

1000 900 600 04.410.362.x 1 unit

1000 1100 600 04.410.363.x 1 unit

1000 1300 600 04.410.364.x 1 unit

1000 1500 600 04.410.365.x 1 unit

1000 1700 600 04.410.366.x 1 unit

1000 1900 600 04.410.367.x 1 unit

SYN20068

D

W

d

22

Knürr Synergy®

With support arms for direct connection on theworktop stabilizer of the linked-up desks.Patented ErgoEdge corner piece front edge provi-des a pleasant surface temperature.Modularity: Installation option for perforated rearpanel or monitor level.Plenty of room for cables, switches and powersupplies in the generously dimensioned cornerpiece tray.Additional vertical cabling possible via the rearsupport foot.Corner piece tray with cover at the rear includingbrush strip for dust protected and out-of-viewcabling (cover not required with mounted moni-tor level).

Material- Sheet steel support foot, support arms and

corner piece tray, powder-coated- Corner worktop: 30 mm three layer particle

board, FP / Y E1 version, fire protection classB2

- Board coating: High pressure plastic lami-nate

- Plastic ErgoEdge corner piece front edge

FinishCorner piece tray, support foot and supportarms: RAL 9006 white aluminum Corner piece panels:.1: Worktop coating in RAL 7035 light gray,





Height setting range650 mm to 850 mm via the side panels ofthe linked-up desks.

Supply schedule1 corner worktop1 corner piece tray with support arms and

rear coverMounting material


Knürr SynergyConsole® Corner Piece

A B Order no. UP

Corner Piece 15° 800 800 04.412.010.x 1 unit




Corner Piece 90° (diagonal back) 800 800 04.412.050.x 1 unit

Trapezoid Corner (diagonal back) 800 800 04.412.060.x 1 unit

Corner Piece15° 1000 1000 04.412.110.x 1 unit




Corner Piece 90° (diagonal back) 1000 1000 04.412.150.x 1 unit

Trapezoid Corner (diagonal back) 1000 1000 04.412.160.x 1 unit

SYN20072

SYN20073

SYN20074

SYN20075 SYN20076 SYN20077

1102

,5

1102,5 1404,8

1404

,8

23

Knürr Synergy®

- As modesty panel- Ideal for all Knürr Synergy® desk types- Increases cross-reinforcing- With fixing option for cable chain, left and right

MaterialSheet steel, powder-coated

Finish.9: RAL 9006 white aluminum

DimensionsHeight: 467 mmPerforation diameter – 25 mm

Supply schedule1 perforated rear panelMounting material

How suppliedFlat-packed kit

Perforated Rear Panel

SYN20039

- As modesty panel- Screwed with the support foot serves as cross-

reinforcing



DimensionsHeight: 467 mmPerforation diameter – 25 mm

Supply schedule1 perforated rear panelMounting material


Perforated rear panel for SynergyConsole Corner Piece

SYN20049

W Order no. UP

600 04.412.810.9 1 unit

800 04.412.811.9 1 unit

1000 04.412.812.9 1 unit

1200 04.412.813.9 1 unit

1400 04.412.814.9 1 unit

1600 04.412.815.9 1 unit

1800 04.412.816.9 1 unit

2000 04.412.817.9 1 unit

Order no. UP

for Corner Piece 15° 04.412.910.9 1 unit




for Corner Piece 90° (diagonal back) 04.412.950.9 1 unit

Trapezoid Corner (diagonal back) 04.412.960.9 1 unit


kg = Weight


24

Knürr Synergy®

Innovative system for ergonomic, safe and secureflat screen positioning.Docking monitor level in extrusion constructiondesign.Horizontal guide for the vertical monitor co-lumns.Spacious cable duct provides additional space forcables, switches and power supplies.Also accessible with wall position via removablecover.With brush strip for dust protection and hidingfrom view.

Material- Extruded aluminum, powder-coated moni-

tor level- Sheet steel covers, side flanges and adapter,

powder-coated


Load ratingMax. 800 N (static surface load) Note: Observe overall desk systemload rating.

Supply schedule1 monitor level1 rear cover strip1 cover with brush stripMounting material


Knürr SynergyConsole® Monitor Level

W Order no. UP

600 04.412.410.9 1 unit

800 04.412.411.9 1 unit

1000 04.412.412.9 1 unit

1200 04.412.413.9 1 unit

1400 04.412.414.9 1 unit

1600 04.412.415.9 1 unit

1800 04.412.416.9 1 unit

2000 04.412.417.9 1 unit

500 For add-on desks 04.412.450.9 1 unit








SYN20034

SYN20035

SYN20097


kg = Weight


25

Knürr Synergy®

Flat screen adaption (VESA 75/100), suitable indesign for Knürr SynergyConsole®.Vertical supports with hidden cable routing(brush strip).For one or two-row desktop flat screen setup.Short flat screen arm and flat screen holder, teles-copable/swivelling with integrated cable routing.Stepless height-adjustable via T-slots in the verti-cal supports.

MaterialExtruded aluminum vertical supports,powder-coatedSheet steel flat screen holder, support holderand support covers, powder-coated

FinishRAL 9006 white aluminum

Dimensions- Vertical supports height – 415 mm (one-

row) and 775 mm (two-row).- Short flat screen holder only carries ap-

prox. 40 mm!- Telescopable flat screen holder from ap-

prox. 270 mm to 380 mm.

Load rating10 kg

Supply schedule1 flat screen holder with fixing material and1 vertical support with fixing material


Flat Screen Holder for Knürr SynergyConsole®

L H Order no. UP

40 Short TFT arm 04.412.001.9 1 unit

270-380 Telescopable TFT arm 04.412.002.9 1 unit

415 Flat screen support adapter, 1-row 04.412.004.9 1 unit

775 Flat screen support adapter, 2-row 04.412.006.9 1 unit

SYN20032

Large technical pedestal for fixing mounting pa-nels, chassis rails, computers and other equip-ment.Ideal for all Knürr Synergy® desk types.No reduction in foot and legroom depth.Side cable outlets, split for separate data andpower cable routing.Upward cable routing via the desk’s side panels orvia optional energy chain.Open at the bottom for optimum cable inlet orventilation from the shelf; optional computershelf available.Cables can be routed through the optional cablebasket tray to the desks’ side panels.Easy to access through completely removablefront and rear cover.Accessories: Mounting rails, cable basket tray,computer shelf and 19” frame.

MaterialSheet steel, powder-coatedExtruded aluminum rear corner extrusions

Finish.9: Main unit and covers, RAL 7021 dark

gray, rear corner extrusions RAL 9006white aluminum

DimensionsExternal depth 390 mm, useful depth 350mm, external height 505 mm, useful height425 mm

Supply schedule1 technical pedestalMounting material


Knürr SynergyConsole® Technical Pedestal

W H D w h d Order no. UP

600 505 390 410 425 350 04.412.610.9 1 unit

800 505 390 610 425 350 04.412.611.9 1 unit

1000 505 390 810 425 350 04.412.612.9 1 unit

1200 505 390 1010 425 350 04.412.613.9 1 unit

1400 505 390 1210 425 350 04.412.614.9 1 unit

1600 505 390 1410 425 350 04.412.615.9 1 unit

1800 505 390 1610 425 350 04.412.616.9 1 unit

2000 505 390 1810 425 350 04.412.617.9 1 unit

SYN20031

SYN20096

26

Knürr Synergy®

19” frame for mounting 19” components andmounting panels.19” frame fixing on technical pedestal base framevia depth braces, making it depth-adjustable.Equipment installation on the 19” extrusion via T-slots and spring nuts, making it height-adjustable.

MaterialSheet steel 19” adapter plate and framecover, powder-coated texture19" extrusions, extruded aluminum, polished

FinishAdapter plate, RAL 9011 graphite black

Supply schedule1 adapter plate1 frame cover2 depth braces2 19" extrusions


19” Frame (for technical pedestal)

KON20032

W H HU Order no. UP

493 355,6 8 04.412.650.7 1 unit

For routing cables with cable ties and as universalmounting option in the technical pedestal.With square and round holes. Holes for mountingcaged nuts.3 rails, two vertical and one horizontal.

MaterialSheet steel, zinc-passivated

DimensionsAll 427 mm, width 70 mm

Supply schedule3 multifunctional bracesMounting material


Multifunctional Braces (for technical pedestal)

SYN20032

H Order no. UP

427 04.412.655.7 1 unit

As computer shelf in the technical pedestal.

Material19 mm three layer particle board, FP / Y E1version, fire protection class B2.Board coating: Direct coating with pressurelaminate.

Finish.9: Board coating and veneer in RAL 7021

dark gray

DimensionsWidth 400 mm or 600 mm

Supply schedule1 insert shelf


Insert Shelf (for technical pedestal)

W H D Order no. UP

400 19 245 04.412.007.9 1 unit

600 19 245 04.412.008.9 1 unit

27

Knürr Synergy®

SYN20033

Spacious, two-way cable chain with separator forseparate cable routing.Can be mounted on the left or right on the tech-nical pedestal and the desk tray.Also suitable for mounting on the rear perfora-tion panel for desks.

MaterialPlastic

FinishBlack

DimensionsWidth, 115 mm; depth, 50 mm, length, approx. 940 mm

Supply schedule1 cable chainMounting material


Cable Chain

W H L Order no. UP

115 50 ca. 940 04.412.009.9 1 unit

ERG00005

Cabling system, suitable for the Knürr Synergy®

technical pedestalSeparate cable routing for data and network ca-bles

MaterialCable basket tray, steel, coated

FinishSheet steel adapter, powder-coated, RAL9006 white aluminum

Supply schedule2 basket trays, suitable for Knürr Synergy®

2 adapters for basket tray mountingMounting material


Cable Basket Tray (for pedestal)

W Order no. UP

600 04.412.850.7 1 unit

800 04.412.851.7 1 unit

1000 04.412.852.7 1 unit

1200 04.412.853.7 1 unit

1400 04.412.854.7 1 unit

1600 04.412.855.7 1 unit

1800 04.412.856.7 1 unit

2000 04.412.857.7 1 unit


kg = Weight


28

Knürr Synergy®

Functionality and style: A productfamily for uniform equipment andfurnishing in the control room in afull-coverage modern design.

Spacious cable management withplenty of space for switches, cablesand power supplies. Completely co-vered from screen through to raisedfloor.

Modular setup – industrially produ-ced modules can be upgraded andadded to at all times; available tobuy for many years to come.

Application areas for the Knürr SynergyWall®

- TV studios, news studios- Process display in control rooms,

control and measuring stations- Network Operation Centers (NOCs)- Data centers – computer monito-

ring- Operation control centers – police,

fire department, rescue services- Municipal traffic monitoring- Security systems, video monitoring- Airport and train station information

terminals- Reception areas

Practical benefits- Quick and easy to set up- Monitor change: Effortlessly wit-

hout any tools – simply hang onmonitors!

- Highest possible stability, evenwith large span widths

- For all monitor sizes; differentsizes can also be mixed

- Straight wall or cockpit solution(10°)

- Low installation depth/lowerspace requirement – good fit forsmall control roomsOption: Without foot stabilizer atthe rear

- The monitor wall can be positio-ned in the room, regardless ofwhat the room is made of

- Optional rear and front panel co-vers provide optimum protectionfor cables and plugs

- Optional pedestals provide spacefor computers, power suppliesand documentation

- Extension option with short crossextrusion for additional displays

- Monitors can swivel up to 15° infour positions

Knürr SynergyWall®

Strong points

SYN20020


kg = Weight


Knürr Synergy®

A complete configuration with four public displays – 1,016 mm (40“)Ready configured for immediate use

Material- Side panels – extruded aluminum with top

cover, sheet steel side panel covers andfoot stabilizer, powder-coated

- Crosspieces – extruded aluminum,powder-coated

- Large monitor holder – sheet steel,powder-coated

Finish- Side panel aluminum extrusions, cross ex-

trusions and large monitor holder: RAL9006 white aluminum

- Side panel covers, foot stabilizer and sidepanel top cover: RAL 7021 dark gray

DimensionsTotal width – 2,110 mmClear width – 1,890 mmSide panel: height, 2,400 mm;

depth, 290 mm; width, 107 mm

Supply schedule2 side panels, with integrated vertical cable

routing and foot stabilizers front and rearfor highest possible stability

2 crosspieces for fixing the TFT adapter;with integrated horizontal cable routing

8 large monitor holders, tiltable to 15°4 public displays, LCD, 1,016 mm (40“)

(Make: Subject to manufacturer and tech-nical changes due to short product cycleson the display market.)

Network cable and VGA cable for 4 LCD mo-nitorsMounting material

How suppliedFlat-packed kit, partially assembled

- Easy flat screen mounting between the moni-tor wall vertical extrusions

- Stable monitor hang-on with adjustable angleflat screen holders

Material- Side panels – extruded aluminum with top

cover, sheet steel side panel covers andfoot stabilizer, powder-coated

- Crosspieces – extruded aluminum,powder-coated

- Large monitor holder – sheet steel,powder-coated

Finish- Side panel aluminum extrusions, cross ex-

trusions and large monitor holder: RAL9006 white aluminum

- Side panel covers, foot stabilizer and sidepanel top cover: RAL 7021 dark gray

DimensionsTotal width – 2,110 mmClear width – 1,890 mmSide panel: height, 2,400 mm;

depth, 290 mm, width, 107 mm

NoteFurther sizes and variations possible on request

Supply schedule2 side panels, with integrated vertical cable

routing and foot stabilizers front and rearfor highest possible stability

2 crosspieces for fixing the TFT adapter;with integrated horizontal cable routing

8 large monitor holders, for four public dis-plays, 1,016 mm (40”), tiltable to 15° infour positions

Mounting material

How suppliedFlat-packed kit, partially assembled

Knürr SynergyWall® complete configuration

SYN20021

Knürr SynergyWall® Basic Frame

W H Order no. UP

2110 2400 04.102.032.9

29

W H Order no. UP

2110 2400 04.102.030.9

SYN20023

30

Knürr Synergy®

Design harmonized with Knürr SynergyConsole®.Spacious cable management with plenty ofspace for switches, cables and power supplies.Economically integrated cable routing.Split covers inside for easy cable routing; full onthe outside.Long foot stabilizer for freely placing the panel inthe room, or without foot stabilizer at the rearfor wall positioning.T-slots outside for connecting cross supports andinside for mounting Knürr DI-Strip® socket stripsand cable routing elements.

Material- Extruded aluminum,

powder-coated- Covers and foot stabilizer:

Sheet steel, powder-coated

Finish- Extruded aluminum, RAL 9006 white alu-

minum- Sheet steel components, RAL 7021 dark

gray

DimensionsHeight, 2,400 mmWidth, 107 mmDepth, 290 mmFoot stabilizer: Depth 1,200 mm or 600 mm

Width, 129 mm

Supply schedule1 side panel

How suppliedPreassembled

Knürr SynergyWall® Side Panel

W H Order no. UP

107 2400 04.102.035.9 1 unit

107 2400 foot stabilizer, short 04.102.036.9 1 unit

For straight linking or in 10° angleExtruded aluminum stable cross supportDepth-adjustable for optimum monitor arrange-mentSpacious cable management with plenty of spacefor switches, cables and power supplies.Economical cable routing integrated in the crosssupport.With T-slots for mounting Knürr DI-STRIP® socketstrips and cable routing elements.New: Short, stable cross extrusion, for small dis-plays.Internal or external on the side panels, and depthadjustable.

Material- Cross extrusion: Extruded aluminum,

powder-coated- Adapter plates – aluminum, powder-

coated


DimensionsHeight: 120 mmExternal depth: 60 mmWidth: 1,900 mm, for 2 displays 1,016 mm (40“)

Supply schedule1 cross extrusion2 adapter plates for connecting on the

side panelsCross support length – 400 mm: 1 adapter plate, 1 closing panelMounting material


Knürr SynergyWall® Cross Support

W H D Order no. UP

1900 120 60 Complete cross support, straight 04.102.040.9 1 unit

1900 120 60 Complete cross support, 10° linking 04.102.041.9 1 unit

400 120 60 Cross support, short 04.102.042.9 1 unit

SYN20023

SYN20022

SYN20016

31

Knürr Synergy®

VESA adapter, quick and easy to hang onWith safety screws against unintentional removalScrew on to the monitor – hang on – done!Angle adjustable up to 15° in three stages

Material/finishSheet steel, powder-coated


Supply schedule1 monitor holderMounting material

How suppliedPre-assembled

NoteLarge monitor holder: For display sizes 762 mm (30”) to 1,651 mm (65”)Two monitor holders are required for eachdisplay Small monitor holder: With VESA adapter 75 mm/100 mm

Knürr SynergyWall® Monitor Holder

Order no. UP

Large monitor holder 04.102.038.9 1 unit

Small monitor holder 04.102.039.9 1 unit

SYN20018

SYN20017

SYN20098 SYN20099


kg = Weight


32

Knürr Synergy®

The functional solution- IT trolley for hospitals (ward trolley,

stand or sit)- Equipment trolley for medical tech-

nology- Test trolley in production/work-

shops - Storage consignment, scanner trol-

ley - Ideal for automotive and industrial

projects where small, space-savingtrolleys with cable management arerequired

- The unmistakable design is harmoni-zed with the Knürr Synergy® productfamily

- Fully assembled and turnkey ready foruse

- Tested in accordance the latest stan-dards and specifications

- Stable, and yet attractively designedsheet steel basic frame with verticalextruded aluminum supports for thehighest possible safety and stability

- ESD versions of all modules available

- Modern, smooth-running doublewheel castors in conductive version

- Ergonomics in detail: All modules can be mounted at anyheight, absolutely in accordance withthe user’s individual wishes

- User-friendly cable managementwith plenty of room for cables, sok-ket strips, isolating transformers,cable exit to the front over the entireheight

MaterialSheet steel/extruded aluminumtube handleCover with master switchAluminum extrusion vertical sup-ports Modules can be mounted steplesson the height via T-slots on the alu-minum extrusionWelded sheet steel base unitSpacious cable exit from the sup-ports in the base trayTwin swivel castors, Ø125 mmImpact protection caps

Knürr SynergyCart®

Strong points

SYN20005

SYN20024 SYN200090

Knürr Synergy®

Material- Extruded aluminum vertical supports and

sliding handle, powder-coated- Sheet steel basic frame and installation

modules, powder-coated- Plastic impact protection caps

Finish.1: RAL 7035 light gray.9: Base unit, cover for base unit, impact

protection caps, handle, extrusion cover,worktops, keyboard extension, holderfor tower PC: RAL 7021 dark grayVertical extrusion, handle, vertical cable duct, flat screen holder:RAL 9006 white aluminum

Load ratingPermissible total weight: 125 kgLoad per worktop: 15 kgDrawer load: Housing, 10 kg; extension, 2 kg

Supply schedule1 Knürr SynergyCart® Basic Frame1 vertical cable duct for H 880 mm or

H 1,200 mm1 sliding handle1 large worktop (only with height 1,200 mm)1 keyboard extension1 LCD adapter, type D with extrusion adapter1 holder for tower PCESD model with conductive castors and earthing-mounting material

Knürr SynergyCart® Computer TrolleyThe mobile PC workstation, e.g. for stores, office, lab, training

H ESD Order no. UP

880 00.705.300.1 1 unit

880 00.705.300.9 1 unit

880 • 00.705.305.1 1 unit

880 • 00.705.305.9 1 unit

1200 00.705.310.1 1 unit

1200 00.705.310.9 1 unit

1200 • 00.705.315.1 1 unit

1200 • 00.705.315.9 1 unit

SYN20002

33

SYN20050

SYN20051


kg = Weight


34

Knürr Synergy®





protection caps, handle, extrusion cover,worktops, drawer: RAL 7021 dark grayVertical extrusion, handle, vertical cableduct: RAL 9006 white aluminum

Load ratingPermissible total weight: 125 kgLoad per worktop: 15 kgDrawer load: Housing, 10 kg; extension, 2 kg

Supply schedule1 basic frame H 880 mm or 1,200 mm1 cable duct for H 880 mm or H 1,200 mm1 sliding handle1 worktop, small1 worktop, large1 drawerESD model with conductive castors andearthing-mounting material

Knürr SynergyCart® Laptop TrolleyFlexible use in hospitals, offices, test environments, labs

H ESD Order no. UP

880 00.705.320.1 1 unit

880 00.705.320.9 1 unit

880 • 00.705.325.1 1 unit

880 • 00.705.325.9 1 unit

1200 00.705.330.1 1 unit

1200 00.705.330.9 1 unit

1200 • 00.705.335.1 1 unit

1200 • 00.705.335.9 1 unit

SYN20000

SYN20054

SYN20055


kg = Weight


Knürr Synergy®





protection caps, handle, extrusion cover,worktops, keyboard extension and dra-wer: RAL 7021 dark grayVertical extrusion, handle, vertical cableduct and transformer tray: RAL 9006white aluminum

Load ratingPermissible total weight: 125 kgLoad per worktop: 15 kgDrawer load: Housing, 10 kg; extension, 2 kgKeyboard extension load: Housing, 10 kg;extension, 2 kgTransformer tray load: 20 kg

Supply schedule1 basic frame H 880 mm or 1,200 mm1 extrusion cover with switch1 sliding handle1 small worktop (only height 1,200 mm)1 worktop, large1 keyboard extension1 drawer1 transformer trayESD model with conductive castors and earthing-mounting material

Knürr SynergyCart® Equipment TrolleyFlexible use in medical technology, test environments, labs

H ESD Order no. UP

880 00.705.340.1 1 unit

880 00.705.340.9 1 unit

880 • 00.705.345.1 1 unit

880 • 00.705.345.9 1 unit

1200 00.705.350.1 1 unit

1200 00.705.350.9 1 unit

1200 • 00.705.355.1 1 unit

1200 • 00.705.355.9 1 unit

SYN20005

35

SYN20052

SYN20053

36

Knürr Synergy®

Base unit- Robust sheet steel welded construction for

highest possible stability- Foot stabilizer position provides optimum

stability - Double wheel castors, 125 mm

in modern design- Impact protection caps for protecting

furniture- Base unit cover is also the surface for mini-

tower PCs

Aluminum vertical extrusion provides flexible screw-on options with T-slots for Knürr DI-STRIP® socket strips andcable routersAll modules can be mounted at any heightwith T-slot system on vertical extrusions

Vertical cable duct mounted on the rear, plenty of space forcable volumes. Cable exits front and rearover the entire height


sliding handle, powder-coated- Sheet steel basic frame and cable duct

cover, powder-coated- Plastic impact protection caps


protection caps, handle, extrusioncover: RAL 7021 dark grayVertical extrusion, handle, verticalcable duct: RAL 9006 white aluminum

Load ratingPermissible total weight: 125 kgBase unit cover: 10 kg

Supply schedule1 sliding handle1 extruded aluminum vertical support1 cable duct top cover1 vertical cable duct1 base unitMounting materialESD model with conductive castors andearthing material

Knürr SynergyCart® Basic Frame

H ESD Order no. UP

880 00.705.100.1 1 unit

1200 00.705.120.1 1 unit

880 00.705.100.9 1 unit

1200 00.705.120.9 1 unit

880 • 00.705.105.1 1 unit

1200 • 00.705.125.1 1 unit

880 • 00.705.105.9 1 unit

1200 • 00.705.125.9 1 unit

SYN20078

SYN20080

SYN20079

37

Knürr Synergy®

Can be ergonomically mounted at anyheight, steplessTorsion-free and stableWith depression to prevent sliding and foranti-slip mats


Finish.1: RAL 7035 light gray.9: RAL 7021 dark gray

Load rating15 kg

Supply schedule1 worktopMounting material

Knürr SynergyCart® Worktop

W T ESD Order no. UP

400 300 00.705.200.1 1 unit

400 300 00.705.200.9 1 unit

500 300 00.705.220.1 1 unit

500 300 00.705.220.9 1 unit

400 300 • 00.705.205.1 1 unit

400 300 • 00.705.205.9 1 unit

500 300 • 00.705.225.1 1 unit

500 300 • 00.705.225.9 1 unit

SYN20005

SYN20000


kg = Weight


38

Knürr Synergy®

Can be ergonomically mounted at any height,steplessKeyboard extension with mouse table, can bepushed out on the right or leftStable extension enclosure with telescopic slidesEnclosure cover can be used as storage levelWith drawer safety catch against unintentionalopeningAlso as ESD version

MaterialMain unit and extension: Sheet steel,powder-coated


Dimensionswidth, 505 mm; depth, 350 mm; height, 110 mmdrawer width, 490 mm; depth, 210 mm

Load ratingHousing, 10 kg; extension, 2 kg

Supply schedule1 keyboard extensionMounting material

Knürr SynergyCart® Keyboard Extension

W H D ESD Order no. UP

505 110 350 00.705.250.x 1 unit

505 110 350 • 00.705.255.x 1 unit

Can be ergonomically mounted at any height,steplessWith drawer safety catch against unintentionalopeningAlso as ESD version

MaterialMain unit and drawer: Sheet steel, powder-coatedHandle: Plastic, black


Dimensionswidth, 505 mm; depth, 350 mm; height, 110 mmdrawer width, 425 mm; depth, 265 mm; height, 90mm

Load ratingHousing, 10 kg; extension, 2 kg

Supply schedule1 drawer moduleMounting material

Knürr SynergyCart® Drawer

W H D ESD Order no. UP

500 300 110 00.705.270.x 1 unit

500 300 110 • 00.705.275.x 1 unit

SYN20002

SYN20006

SYN20001

39

Knürr Synergy®

Included in the basic frame supply scheduleProvides plenty of space for cable volumesMounting on the rear vertical extrusionGreatest possible flexibility: Cable exits frontand rear over the entire height.Rear panel with Euro perforation for hang-onaccessories such as:- Tray shelf- Cable winder


Finish.1: RAL 7035 light gray.9: RAL 9006 white aluminum

DimensionsUseful depth, 140 mm

Supply schedule1 cable ductMounting material

Knürr SynergyCart® Cable Duct

W H D Order no. UP

880 00.705.292.x 1 unit

1200 00.705.295.x 1 unit

For mounting on the rear of the cable ductHanging on the rear perforations of the cable ductwith safety screws



DimensionsDepth, 82 mmHeight, 75 mmWidth, 118 mm

Load rating1 kg

Supply schedule1 hang-on trayMounting material

Knürr SynergyCart® Tray Shelf

W H D Order no. UP

118 75 82 00.705.296.x 1 unit

SYN20011

SYN20012


kg = Weight


40

Knürr Synergy®

Adjustable holder clamp for mini-tower PCThe basic frame’s top cover serves as a storageshelf



DimensionsAdjustable width, 160 – 220 mmHeight-variable with T-slot mounting

Supply schedule1 set of holders for PC tower enclosuresMounting material

Knürr SynergyCart® Holder for PC Tower Enclosure

SYN20024

W Order no. UP

160-220 00.705.236.x 1 unit

Retaining clamps for infusion standsFor 25 mm rod diameter2 adapters, can be mounted at any height or onany side

MaterialAluminum, powder-coated


Supply schedule1 set of holders for infusion standsMounting material

Knürr SynergyCart® Holder (for infusion stands)

Order no. UP

00.705.068.x 1 unitSYN20014

41

Knürr Synergy®

Top extrusion cover with central switchLit switch, IP 54Cabled with 3.5 m mains cable with Schuko plugand outgoing 2 m cable with Euro plug, 1.5 mm²cross-section each for device cabling or as con-nector for Knürr DI-STRIP® socket strip.Hidden cable routing in the vertical extrusion.

MaterialExtrusion cover: Sheet steel, powder-coated

FinishExtrusion cover:.1: RAL 7035 light gray.9: RAL 7021 dark gray

Supply schedule1 central switch moduleMounting material

Knürr SynergyCart® Main Switch Module

Order no. UP

00.705.280.x 1 unit

SYN20024

For mounting on the underside of the base unitThe low mounting position increases tilt stabilitywith optimum weight distribution With ventilation openings on the sides and in thebase for safe heat dissipation


Finish.1: RAL 7035 light gray.9: RAL 9006 white aluminum

DimensionsUseful depth, 370 mmHeight, 60 mmWidth, 294 mm

Load rating20 kg

Supply schedule1 transformer trayMounting material

Knürr SynergyCart® Transformer Tray

W H D d Order no. UP

294 60 408 370 00.705.230.x 1 unit

SYN20015


kg = Weight


42

Knürr Synergy®

For covering the vertical cable exitsAs dust protection and hiding from view

MaterialSoft rubber/sponge rubber with embeddedsteel clamp strap

FinishBlack

DimensionsLengths – 590 mm and 910 mm

Supply schedule2 cover extrusions

Knürr SynergyCart® Cover Extrusion (for cable duct)

H L Order no. UP

21 590 for height 880 mm 00.705.297.9 1 unit

21 910 for height 1200 mm 00.705.298.9 1 unit

SYN20067


kg = Weight


43

Knürr Synergy®

09.9

97.9

97.9

• ‘5

GG

610

• Id

ea, G

raph

ic, E

dito

r: G

ropp

/Bus

ler •

Spe

cific

atio

n su

bjec

ts to

cha

nge

wit

hout

not

ice.

While every precaution has been taken to ensure accuracyand completeness in this literature, Knürr AG assumes noresponsibility, and disclaims all liability for damage resultingfrom use of this information or for any errors or omissions.

©2010 Knürr AG. All rights reserved throughout the world.Specifications subject to change without notice.

All names referred to are trademarks or registered trademarks of their respective owners.

®Knürr and the Knürr logo are registered trademarksof Knürr AG.

Emerson Network Power is the global technology leader in numerousareas, and a recognized expert in helping to secure business-criticalprocesses, and therefore contributes to “business-critical continuity.”A whole range of the most varied applications, including the triedand tested Knürr rack system solutions and the accompanying thermalmanagement, ensures the required network stability with maximumtechnological adaptability at the same time.

Knürr system solutions in the world of information and networktechnology are part of an adaptive architecture from Emerson NetworkPower, which flexibly adapts to changes concerning security, high-densityand all associated capacities. Companies are provided sustainable andlong-term benefits from the high IT availability, operative flexibility andimpressive reduction in investment and operating costs.

The Knürr Technical Furniture business unit develops, produces anddistributes technical workstation systems for control consoles, oper-ation control centers and electronics labs, as well as mobile equip-ment carriers for the automotive and medical technology industries.

Knürr AG is recognized around the world as one of the leading devel-opers, manufacturers and distributors of rack and enclosure platformsin the indoor and outdoor area, including all relevant active/passivecomponents in 19” construction and the technologies associatedwith it. Knürr is part of Emerson Network Power.

Knürr is certified in accordance with EN ISO 9001 and EN ISO 14001,and its quality management continuously guarantees the higheststandards in all areas of the company.

Knürr AGGlobal Headquarters

Mariakirchener Straße 3894424 Arnstorf • GermanyTel. +49 (0) 87 23 / 27 - 0Fax +49 (0) 87 23 / 27 - [email protected]

Knürr Technical Furniture GmbHBusiness Unit

Mariakirchener Straße 3894424 Arnstorf • GermanyTel. +49 (0) 87 23 / 28 - 0Fax +49 (0) 87 23 / 28 - [email protected]

Local contacts, please visit:www.knuerr.comwww.emerson.comwww.technical-furniture.com

Emerson Network Power

The global leader in enabling business-critical continuity EmersonNetworkPower.com

Knürr logo, Emerson Network Power and the Emerson Network Power logo are trademarks and service marks of Emerson Electric Co. ©2010 Emerson Electric Co.

AC Power Systems

Connectivity

DC Power Systems

Embedded Power

Integrated Cabinet Solutions

Outside Plant

Power Switching & Controls

Precision Cooling

Services

Site Monitoring

Surge & Signal Protection

Rack & Enclosure Systems

knürr synergy · strip for dust protected and concealed cabling (cover not required with mounted...

Documents