kodak setup manuals
TRANSCRIPT
Kodak
Setup Manuals
Setup Manual for Kodak CR 800 / 900 / 500 / 850 / 950 with LASER IMAGER Products
Author: [email protected], Edition: May ´05 1
TENTATIVE Setup for Kodak DirectView CR with LASER IMAGERS Connection via DICOM: n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /
Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual).................... 2 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /
Kodak DryView 8500 LASER IMAGER / Plus (see also 8800/8500 Dual).................... 4 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /
Kodak DryView 8100 LASER IMAGER......................................................................... 6 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /
Kodak DryView 8300 LASER IMAGER......................................................................... 8 n Kodak Digital Science 190 MEDICAL LASER PRINTER......................................... 10 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /
Kodak Ektascan 2180 LASER PRINTER ....................................................................... 12 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /
Kodak Ektascan 160 LASER IMAGER .......................................................................... 14 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /
Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual) (1)............... 16 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /
Kodak DryView 8500 LASER IMAGER / Plus (see also 8800/8500 Dual) (1)............... 18 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /
Kodak DryView 8100 LASER IMAGER (1).................................................................... 20 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /
Kodak DryView 8300 LASER IMAGER (1).................................................................... 22 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /
Kodak DryView 8610 LASER IMAGING SYSTEM / for Mammography (see also 8600) (1) ............................................................................................................ 24
n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8200 LASER IMAGER (1).................................................................... 26
n Kodak DryView 8900 LASER IMAGER......................................................................... 28 n Kodak DryView 8150 LASER IMAGER......................................................................... 30 n Kodak Color Medical Imager 1000 ................................................................................. 32
1 setup valid also for Kodak PACS LINK 25 PRINT SERVER.
Setup Manual for Kodak CR 800 / 900 / 500 / 850 / 950 with LASER IMAGER Products
Author: [email protected], Edition: May ´05 2
Kodak CR 800 / CR 900 / CR 500 / CR 850 / CR 950 via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /
Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual)
Requirements: CR800/CR900 v3.0 or v3.2, MIM (inside CR800/CR900) v5.0.b21 Requirements: CR800/CR900 v3.33, MIM (inside CR800/CR900) v5.2.b9 Requirements: CR850/CR950 v3.40, MIM (inside CR850/CR950) v5.2.b9 Requirements: CR500 v3.6, MIM (inside CR500) v5.2.b14 Requirements: 9410 v1.6, 8700 v1.34 Note: This setup is basically also valid for 8800/8700 Dual camera
by basically using the correspondent Model into 9410 Local Printers Note: CR always sends 2:1 format Portrait-1column-2 rows, with images 90-degree rotated,
therefore some limitations are present if the format 2:1 side by side is wished Note: if images are printed too dark, set TFT=Siews87b.w87 to print them lighter (see below) CR Setup, from Service Functions/Login/Exit to Desktop, into MIM Service: n on Configure, Network: n Computer Name=eg CRMIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Destination, Add, Print, Network, Qualified, 9410/8700, Set:
n General: Log.Name=8700, IPAddr=accordingly, Database=9410/8700 n General: Model=8700, Memory=32 n Media Info: Media=35x43cm, 4096x5217, 5217, (Blue) n DICOM Info: Protocol=DICOM 3.0, Service Class=Basic Grayscale Print n DICOM Info: Port=1024, AE Title=NER_9410, Counters=40, Timers=100 n Supported Items: Collation=On, Tonescaling=On n Interpolation: No Magnif=On, Bilinear=On, Replic=On, Cubic Spline=On n Format Types: 1, 2, 4, 6, 9, 12, 15, 16, 20, 24=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On
n Formatting: DICOM Annotation Box=On, Trim=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On
Kodak DirectView CR 800Kodak DryView 8700 Plus
Kodak 9410 PACS Link
DICOM Network
3M8700 DryView
Fiber Cable
Fiber Cable
Setup Manual for Kodak CR 800 / 900 / 500 / 850 / 950 with LASER IMAGER Products
Author: [email protected], Edition: May ´05 3
n Formatting: Max Img Band=4, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=0, Min Vert Sep=6 n Formatting: Trim Width when enabled=1, Trim Width when disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Max Image Dmax=3.1 n SCU: Density Space= On, Perception LUT =On n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7
9410 Setup: n on Device Setup, LOCAL PRINTERS:
n Printer=8700, Model=8700, Output=Fiber n Baud=19200, Parity=None, Data=8, Stop=1, Command Set=Superset n Pixel=12, Header/Line, Timeout=60, Transfer Rate=2 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=5, Max.Density=300, Contrast=6, Border Density=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87
n on Device Setup, SCP PRINTERS, Current Providers: n Printer=8700, AE Title= NER_9410, Port= 1024, Max Associations= 5
n on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle= accordingly, SCU IPAddr=accordingly, SCP=8700 n Copies=1, Contrast Table=2, TFT/ULUT=Wrkstn2a.w87 (or Siews87b.w87) n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=5 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0
8700 Plus Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=12, Header/Line, Parity=Enable Even, Port=0, Timeout=60
Setup Manual for Kodak CR 800 / 900 / 500 / 850 / 950 with LASER IMAGER Products
Author: [email protected], Edition: May ´05 4
Kodak CR 800 / CR 900 / CR 500 / CR 850 / CR 950 via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /
Kodak DryView 8500 LASER IMAGER / Plus (see also 8800/8500 Dual)
Requirements: CR800/CR900 v3.0 or v3.2, MIM (inside CR800/CR900) v5.0.b21 Requirements: CR800/CR900 v3.33, MIM (inside CR800/CR900) v5.2.b9 Requirements: CR850/CR950 v3.40, MIM (inside CR850/CR950) v5.2.b9 Requirements: CR500 v3.6, MIM (inside CR500) v5.2.b14 Requirements: 9410 v1.6, 8500 v1.34 Note: This setup is basically also valid for 8800/8500 Dual camera
by basically using the correspondent Model into 9410 Local Printers Note: CR always sends 2:1 format Portrait-1column-2 rows, with images 90-degree rotated,
therefore some limitations are present if the format 2:1 side by side is wished Note: if images are printed too dark, set TFT=Siews87b.w87 to print them lighter (see below) CR Setup, from Service Functions/Login/Exit to Desktop, into MIM Service: n on Configure, Network: n Computer Name=eg CRMIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Destination, Add, Print, Network, Qualified, 9410/8500, Set:
n General: Log.Name=8500, IPAddr=accordingly, Database=9410/8500 n General: Model=8500, Memory=32 n Media Info: Media=11x14in, 3388x4277, 4277, (Blue) n DICOM Info: Protocol=DICOM 3.0, Service Class=Basic Grayscale Print n DICOM Info: Port=1024, AE Title=NER_9410, Counters=40, Timers=100 n Supported Items: Collation=On, Tonescaling=On n Interpolation: No Magnif=On, Bilinear=On, Replic=On, Cubic Spline=On n Format Types: 1, 2, 4, 6, 9, 12, 15, 16, 20=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On
n Formatting: DICOM Annotation Box=On, Trim=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On
n Formatting: Max Img Band=4, Max Band per Page=20, Max Img Col=0
Kodak DirectView CR 800Kodak DryView 8500 Plus
Kodak 9410 PACS Link
DICOM Network
3M 8700 DryView
Fiber Cable
Fiber Cable
Setup Manual for Kodak CR 800 / 900 / 500 / 850 / 950 with LASER IMAGER Products
Author: [email protected], Edition: May ´05 5
n Formatting: Max Img Row=0, Min Horiz Sep=9, Min Vert Sep=6 n Formatting: Trim Width when enabled=1, Trim Width when disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Max Image Dmax=3.1 n SCU: Density Space= On, Perception LUT =On n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7
9410 Setup: n on Device Setup, LOCAL PRINTERS:
n Printer=8500, Model=8500, Output=Fiber n Baud=19200, Parity=None, Data=8, Stop=1, Command Set=Superset n Pixel=12, Header/Line, Timeout=60, Transfer Rate=2 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=5, Max.Density=300, Contrast=6, Border Density=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87
n on Device Setup, SCP PRINTERS, Current Providers: n Printer=8500, AE Title= NER_9410, Port= 1024, Max Associations= 5
n on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle= accordingly, SCU IPAddr=accordingly, SCP=8500 n Copies=1, Contrast Table=2, TFT/ULUT= Wrkstn2a.w87 (or Siews87b.w87) n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=5 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0
8500 Plus Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=12, Header/Line, Parity=Enable Even, Port=0, Timeout=60
Setup Manual for Kodak CR 800 / 900 / 500 / 850 / 950 with LASER IMAGER Products
Author: [email protected], Edition: May ´05 6
Kodak CR 800 / CR 900 / CR 500 / CR 850 / CR 950 via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /
Kodak DryView 8100 LASER IMAGER
Requirements: CR800/CR900 v3.0 or v3.2, MIM (inside CR800/CR900) v5.0.b21 Requirements: CR800/CR900 v3.33, MIM (inside CR800/CR900) v5.2.b9 Requirements: CR850/CR950 v3.40, MIM (inside CR850/CR950) v5.2.b9 Requirements: CR500 v3.6, MIM (inside CR500) v5.2.b14 Requirements: 9410 v1.6, 8100 v2.4.1 Note: CR always sends 2:1 format Portrait-1column-2 rows, with images 90-degree rotated,
therefore some limitations are present if the format 2:1 side by side is wished Note: if images are printed too dark, set TFT=Siews87b.w87 to print them lighter (see below) CR Setup, from Service Functions/Login/Exit to Desktop, into MIM Service: n on Configure, Network: n Computer Name=eg CRMIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Destination, Add, Print, Network, Qualified, 9410/8100, Set:
n General: Log.Name=8100, IPAddr=accordingly, Database=9410/8100 n General: Model=8100, Memory=32 n Media Info: Media=35x43cm, 4096x5217, 5127, (Blue) n DICOM Info: Protocol=DICOM 3.0, Service Class=Basic Grayscale Print n DICOM Info: Port=1024, AE Title=NER_9410, Counters=40, Timers=100 n Supported Items: Collation=On, Tonescaling=On n Interpolation: No Magnif=On, Bilinear=On, Replic=On, Cubic Spline=On n Format Types: 1, 2, 4, 6, 9, 12, 15, 16, 20, 24=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Trim=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: Max Img Band=4, Max Band per Page=12, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=15, Min Vert Sep=6, n Formatting: Trim Width when enabled=0, Trim Width when disabled=0 n Formatting: Pixel Pitch=12.8205
Kodak DirectView CR 800 Kodak DryView 8100Kodak 9410 PACS Link
DICOM Network
COPCIL BoardCopper Cable Control 9-pin
Data 37-pin
RS4229-pole Plug
Setup Manual for Kodak CR 800 / 900 / 500 / 850 / 950 with LASER IMAGER Products
Author: [email protected], Edition: May ´05 7
n Image Processing: Grayscale=On, Max Image Dmax=3.1 n SCU: Density Space= On, Perception LUT=On n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7
9410 Setup: on Device Setup, LOCAL PRINTERS: n Printer=8100, Model=8100 4096 pxls/line, Output=Copper n Baud=1200, Parity=Even, Data=8, Stop=1, Command Set=952 n Pixel=12, Header/Line, Timeout=60, Transfer Rate=1 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=5, Max.Density=300, Contrast=6, Border Density=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87 on Device Setup, SCP PRINTERS, Current Providers: n Printer=8100, AE Title= NER_9410, Port= 1024, Max Associations= 5 on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle= accordingly, SCU IPAddr=accordingly, SCP=8100 n Copies=1, Contrast Table=2, TFT/ULUT= Wrkstn2a.w87 (or Siews87b.w87) n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=5 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0 8100 Setup on CONFIGURATION Menu: n on SIB board (ie external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=60, P1,…,P6=0
n on IMAGE QLTY-> Mag Scaling=Off, Pixel Correct=Off, 952 Override=Off n on IMAGE QUALITY-> TFT FILES: TFT=ver693c0.w87 n on LOCAL PANEL: Contrast=6, Density=3.00 n on SYSTEM Menu: Acquire=Digital, Max.Img.Columns=4361 n on DIGITAL Menu: Pixel Depth=12, Header/Line, Parity=Even
Setup Manual for Kodak CR 800 / 900 / 500 / 850 / 950 with LASER IMAGER Products
Author: [email protected], Edition: May ´05 8
Kodak CR 800 / CR 900 / CR 500 / CR 850 / CR 950 via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /
Kodak DryView 8300 LASER IMAGER
Requirements: CR800/CR900 v3.0 or v3.2, MIM (inside CR800/CR900) v5.0.b21 Requirements: CR800/CR900 v3.33, MIM (inside CR800/CR900) v5.2.b9 Requirements: CR850/CR950 v3.40, MIM (inside CR850/CR950) v5.2.b9 Requirements: CR500 v3.6, MIM (inside CR500) v5.2.b14 Requirements: 9410 v1.6, 8300 v4.9.1, 8300 LUT v3.0.3B Note: The 9410/8300 configuration can not print the External Text Annotation Box, in this case MIM200/8300 solve the problem ie print External Text Annotation Box Note: CR always sends 2:1 format Portrait-1column-2 rows, with images 90-degree rotated,
therefore some limitations are present if the format 2:1 side by side is wished Note: if images are printed too dark, set Contrast=4 to print them lighter (see below) CR Setup, from Service Functions/Login/Exit to Desktop, into MIM Service: n on Configure, Network: n Computer Name=eg CRMIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Destination, Add, Print, Network, Qualified, 9410/8300, Set:
n General: Log.Name=8300, IPAddr=accordingly, Database=9410/8300 n General: Model=8300, Memory=32 n Media Info: Media=8x10in, 2256x2676, 2676, (Blue) n DICOM Info: Protocol=DICOM 3.0, Service Class=Basic Grayscale Print n DICOM Info: Port=1024, AE Title=NER_9410, Counters=40, Timers=100 n Supported Items: Collation=On, Tonescaling=On n Interpolation: No Magnif=On, Bilinear=On, Replic=On, Cubic Spline=On n Format Types: 1, 2, 4, 6=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Trim=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=0, Min Vert Sep=6
Kodak DirectView CR 800
Kodak DryView 8300
Kodak 9410 PACS Link
DICOM Network
Control 9 pin
Data 37 pin
COPCIL boardCopper Cable
Setup Manual for Kodak CR 800 / 900 / 500 / 850 / 950 with LASER IMAGER Products
Author: [email protected], Edition: May ´05 9
n Formatting: Trim Width when enabled=0, Trim Width when disabled=0 n Formatting: Pixel Pitch=11.9048 n Image Processing: Grayscale=On, Max Image Dmax=3 n SCU: Density Space= On, Perception LUT=On n M952 Usage: Min H/V Mag=1, Max H/V Mag=16, Min Dmax 952=1.5
9410 Setup: n on Device Setup, LOCAL PRINTERS:
n Printer=8300, Model=8300 Copper, Output=Copper n Command Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Pixel=8, Header/Line, Timeout=60, Transfer Rate=1 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=0, Max.Density=300, Contrast=6, Border Density=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT= upmsv3k.w8u
n on Device Setup, SCP PRINTERS, Current Providers: n Printer=8300, AE Title= NER_9410, Port= 1024, Max Associations= 5 n on Device Setup, SCP PRINTERS, Registered Users:
n SCU AETitle= accordingly, SCU IPAddr=accordingly n SCP=8300, Copies=1, Contrast Table=1 (or 4), TFT/ULUT= wrkstn83a.w8u n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=0 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0
8300 Setup: n on Operator Menu set: D=16, C=6, Sharp/Smooth=0 ie Auto n on Operator Menu set: Film Layout: 1 on 1=Portrait n on Service Menu set: Ratio=1.00, Serial=1200,8,1,Even,Comma,3M, Memory=16 n on Service Menu set: Digital Interface: Parity=Even, Modality Group=1
Setup Manual for Kodak CR 800 / 900 / 500 / 850 / 950 with LASER IMAGER Products
Author: [email protected], Edition: May ´05 10
Kodak CR 800 / CR 900 / CR 500 / CR 850 / CR 950 via DICOM with Kodak Digital Science 190 MEDICAL LASER PRINTER
Requirements: CR800/CR900 v3.0 or v3.2, MIM (inside CR800/CR900) v5.0.b21 Requirements: CR800/CR900 v3.33, MIM (inside CR800/CR900) v5.2.b9 Requirements: CR850/CR950 v3.40, MIM (inside CR850/CR950) v5.2.b9 Requirements: CR500 v3.6, MIM (inside CR500) v5.2.b14 Requirements: 190 rel. 1.7.29 Note: CR always sends 2:1 format Portrait-1column-2 rows, with images 90-degree rotated,
therefore some limitations are present if the format 2:1 side by side is wished CR Setup, from Service Functions/Login/Exit to Desktop, into MIM Service: n on Configure, Network: n Computer Name=eg CRMIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Destination, Add, Print, Network, Qualified, 190, Set:
n General: Log.Name=190, IPAddr=accordingly, Database Name=190 n General: Model=190, Memory=32 n Media Info: Media=35x43cm, 4096x5120, 5000, Any (Blue,Clear) n DICOM Info: Protocol=DICOM 3.0, Service Class=Basic Grayscale Print n DICOM Info: Port=5040, AE Title=NER_ANY,Counters=40,Timers=100 n Supported Items: Collation=On, Common Text=On, Tonescaling=On n Supported Items: Pivot Density=On, Remote Image Del=On, Rotation=On n Interpolation: No Magnif=On, Bilinear=On, Replic=On, Cubic Spline=On n Interpolation: Cubic Convolution 2=On, Cubic Convolution 3=On n Format Types: Custom Formats=On, Slide Format=On, Row Symm.=On n Format Types: Super Slide=On, 1,2,4,6,8,9,12,15,16,20,24,30,35=On n Formatting: Trim=On, Req.Image Size=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=0, Min Vert Sep=0 n Formatting: Trim Width when enabled=0, Trim Width when disabled=0 n Formatting: Pixel Pitch=12.5 n Image Processing: Color=On, Color/Grayscale=On, n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2
Kodak DirectView CR 800
DICOM Network
Kodak 190 camera
Setup Manual for Kodak CR 800 / 900 / 500 / 850 / 950 with LASER IMAGER Products
Author: [email protected], Edition: May ´05 11
n SCU: Density Space= On, Curve Shape=On n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7
190 Setup: n On 190 Control Panel press Menu, Setup: n Printer Density=3.00, Curve Shape=0.0, Contrast=0, Contrast Pivot Density=1.2 n IPAddress=accordingly, Subnet Mask=accordingly, Gateway Address=accordingly n Port=5040, Network Node Name=Kodak MLP190, Connection Type=RJ45
Setup Manual for Kodak CR 800 / 900 / 500 / 850 / 950 with LASER IMAGER Products
Author: [email protected], Edition: May ´05 12
Kodak CR 800 / CR 900 / CR 500 / CR 850 / CR 950 via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /
Kodak Ektascan 2180 LASER PRINTER
Requirements: CR800/CR900 v3.0 or v3.2, MIM (inside CR800/CR900) v5.0.b21 Requirements: CR800/CR900 v3.33, MIM (inside CR800/CR900) v5.2.b9 Requirements: CR850/CR950 v3.40, MIM (inside CR850/CR950) v5.2.b9 Requirements: CR500 v3.6, MIM (inside CR500) v5.2.b14 Requirements: MIM200 v6.1, 2180 v2.17H Note: CR always sends 2:1 format Portrait-1column-2 rows, with images 90-degree rotated,
therefore some limitations are present if the format 2:1 side by side is wished CR Setup, from Service Functions/Login/Exit to Desktop, into MIM Service: n on Configure, Network: n Computer Name=eg CRMIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Destination, Add, Print, Network, Qualified, MIM/2180, Set:
n General: Log.Name=2180, IPAddr=accordingly, Database=MIM/2180 n General: Model=2180, Memory=32 n Media Info: Media=35x43cm, 4096x5156, 5026, Any (Blue,Clear) n Media Info: Media=35x35cm, 4096x4132, 4002, Any (Blue,Clear) n Media Info: Media=11x14in, 3236x4132, 4002, Any (Blue,Clear) n Media Info: Media=8x10in, 2286x2836, 2706, Any (Blue,Clear) n DICOM Info: Protocol=DICOM 3.0, Service Class=Basic Grayscale Print n DICOM Info: Port=5040, AE Title=NER_2180, Counters=40, Timers=100 n Supported Items: Collation=On, Common Text=On, Tonescaling=On n Supported Items: Remote Image Deletion=On, Rotation=On n Interpolation: No Magnif=On, Bilinear=On, Replic=On, Cubic Spline=On n Interpolation: Cubic Convolution 2=On, Cubic Convolution 3=On n Format Types: Custom Formats=On, Slide Format=On, Row Symm.=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On n Formatting: Req.Size Scale=On, Req.Size Mix in Row=On, Trim=On
Kodak DirectView CR 800Kodak MIM 200
DICOM Network
Fiber Cable
Kodak 2180 camera
Setup Manual for Kodak CR 800 / 900 / 500 / 850 / 950 with LASER IMAGER Products
Author: [email protected], Edition: May ´05 13
n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=0, Min Vert Sep=2 n Formatting: Trim Width when enabled=2, Trim Width when disabled=2 n Formatting: Pixel Pitch=12.6582 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 n SCU: Density Space= On, Variable Border=On, Curve Shape =On n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7
MIM200 Setup: n on Configure, Network: n Computer Name=eg Kodak2180, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, KELP 2180, Set:
n General: Log.Name=KELP2180, Database Name=KELP 2180 n General: Model=KELP 2180, Memory=24, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4136x5160, 5030, (Blue) n Media Info:Media=35x35cm,4136x4136,4006, (Blue) n Media Info: Media=11x14in, 3240x4136, 4006, (Blue) n Media Info: Media=8x10in, 2290x2840, 2710, (Blue) n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=2 n Formatting: Pixel Pitch=12.6582 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7
n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape=0 (Always=Y), Contrast (wet)=0 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Minify/Scale=On, Crop=Off, Text Box Relocation=None n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N)
Setup Manual for Kodak CR 800 / 900 / 500 / 850 / 950 with LASER IMAGER Products
Author: [email protected], Edition: May ´05 14
n Interpolation=Cubic, n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Film Output Dest=Bin 9 (Always=N) n Negotiate Color Print=Off
2180 Setup: n Optical Interface board will automatic configure into 2180, no setup needed
Setup Manual for Kodak CR 800 / 900 / 500 / 850 / 950 with LASER IMAGER Products
Author: [email protected], Edition: May ´05 15
Kodak CR 800 / CR 900 / CR 500 / CR 850 / CR 950 via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /
Kodak Ektascan 160 LASER IMAGER
Requirements: CR800/CR900 v3.0 or v3.2, MIM (inside CR800/CR900) v5.0.b21 Requirements: CR800/CR900 v3.33, MIM (inside CR800/CR900) v5.2.b9 Requirements: CR850/CR950 v3.40, MIM (inside CR850/CR950) v5.2.b9 Requirements: CR500 v3.6, MIM (inside CR500) v5.2.b14 Requirements: MIM 200 v6.1, KELI 160 v7.2 Note: CR always sends 2:1 format Portrait-1column-2 rows, with images 90-degree rotated,
therefore some limitations are present if the format 2:1 side by side is wished CR Setup, from Service Functions/Login/Exit to Desktop, into MIM Service: n on Configure, Network: n Computer Name=eg CRMIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Destination, Add, Print, Network, Qualified, 160, Set:
n General: Log.Name=160, IPAddr=accordingly, Database Name=160 n General: Model=160 n Media Info: Media=35x43cm, 4361x5348, 5228, (Blue) n DICOM Info: Protocol=DICOM 3.0, Service Class=Basic Grayscale Print n DICOM Info: Port=5040, AE Title=NER_160, Counters=40, Timers=100 n Supported Items: Collation=On, Common Text=On, Tonescaling=On n Supported Items: Pivot Density=On, Remote Image Del=On, Rotation=On n Interpolation: No Magnif=On, Bilinear=On, Replic=On, Cubic Spline=On n Interpolation: Cubic Convolution 2=On n Format Types: Custom Formats=On, Slide Format=On, Row Symm.=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On n Formatting: Req.Size Scale=On, Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On
Kodak DirectView CR 800
Kodak MIM 200
DICOM Network
CrossedNetwork Cable
Kodak 160 camera
Setup Manual for Kodak CR 800 / 900 / 500 / 850 / 950 with LASER IMAGER Products
Author: [email protected], Edition: May ´05 16
n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width when enabled=2, Trim Width when disabled=0 n Formatting: Pixel Pitch=12.8 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 n SCU: Density Space= On, Curve Shape=On n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7
MIM200 Setup: n on Configure, Network: n Computer Name=eg Kodak160, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, KELI 160, Set:
n General: Log.Name=KELI 160, IPAddr=100.100.100.30, n General: Database Name=KELI 160, Model=KELI 160 n Media Info: Media=35x43cm, 4361x5348, 5228, Any (Blue,Clear) n Supported Item: Collation=On, Text=On, Tonescaling on Image=On n Supported Item: Pivot Density=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7
n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape= 0 (Always=Y), Contrast (wet)=0 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Interpolation=Cubic, Border=Black (Always=N) n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N) n Negotiate Color Print=Off
160 Setup: no modality-specific setup needed
Setup Manual for Kodak CR 800 / 900 / 500 / 850 / 950 with LASER IMAGER Products
Author: [email protected], Edition: May ´05 17
Kodak CR 800 / CR 900 / CR 500 / CR 850 / CR 950 via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /
Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual)
Requirements: CR800/CR900 v3.0 or v3.2, MIM (inside CR800/CR900) v5.0.b21 Requirements: CR800/CR900 v3.33, MIM (inside CR800/CR900) v5.2.b9 Requirements: CR850/CR950 v3.40, MIM (inside CR850/CR950) v5.2.b9 Requirements: CR500 v3.6, MIM (inside CR500) v5.2.b14 Requirements: MIM200 v6.1, 8700 v1.34 Note: This setup is basically also valid for 25 PS computer Note: This setup is basically also valid for 8800/8700 Dual camera
by basically using the correspondent Model into MIM200 Destination Note: CR always sends 2:1 format Portrait-1column-2 rows, with images 90-degree rotated,
therefore some limitations are present if the format 2:1 side by side is wished Note: if images are printed too dark, set TFT=Siews87b.w87 to print them lighter (see below) CR Setup, from Service Functions/Login/Exit to Desktop, into MIM Service: n on Configure, Network: n Computer Name=eg CRMIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Destination, Add, Print, Network, Qualified, MIM/8700, Set:
n General: Log.Name=8700, IPAddr=accordingly, Database=MIM/8700 n General: Model=8700, Memory=32 n Media Info: Media=35x43cm, 4096x5217, 5217, (Blue) n DICOM Info: Protocol=DICOM 3.0, Service Class=Basic Grayscale Print n DICOM Info: Port=5040, AE Title=NER_8700, Counters=40, Timers=100 n Supported Items: Collation=On, Common Text=On, Tonescaling=On n Supported Items: Remote Image Deletion=On, Rotation=On
n Interpolation: No Magnif=On, Bilinear=On, Replic=On, Cubic Spline=On n Interpolation: Cubic Convolution 2=On, Cubic Convolution 3=On n Format Types: Custom Formats=On, Slide Format=On, Row Symm.=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
Kodak DryView 8700 PlusKodak MIM 200
DICOM Network
3M 8700 DryView
Fiber Cable
Fiber Cable
Kodak DirectView CR 800
Setup Manual for Kodak CR 800 / 900 / 500 / 850 / 950 with LASER IMAGER Products
Author: [email protected], Edition: May ´05 18
n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On
n Formatting: Req.Size Scale=On, Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On
n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width when enabled=2, Trim Width when disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n SCU: Density Space= On, Perception LUT =On n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7
MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8700, Set:
n General: Log.Name=8700 n General: Database Name=8700, Model=8700, Memory=32 n Media Info: Media=35x43cm, 4096x5223, 5133, Blue n Output Params: Cmd=SuperSet,Baud=19200,Data=8,Stop=1,Parity=None n Output Params: Pixel=12, Header/Line, Transfer=2000 KHz, Acq=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7
n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT= Wrkstn2a.w87 (or Siews87b.w87) (Always=Y) n Contrast (dry)=2 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off
Setup Manual for Kodak CR 800 / 900 / 500 / 850 / 950 with LASER IMAGER Products
Author: [email protected], Edition: May ´05 19
n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=5 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off
8700 Plus Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=12, Header/Line, Parity= Disable Even, Port=0, Timeout=60
Setup Manual for Kodak CR 800 / 900 / 500 / 850 / 950 with LASER IMAGER Products
Author: [email protected], Edition: May ´05 20
Kodak CR 800 / CR 900 / CR 500 / CR 850 / CR 950 via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /
Kodak DryView 8500 LASER IMAGER / Plus (see also 8800/8500 Dual)
Requirements: CR800/CR900 v3.0 or v3.2, MIM (inside CR800/CR900) v5.0.b21 Requirements: CR800/CR900 v3.33, MIM (inside CR800/CR900) v5.2.b9 Requirements: CR850/CR950 v3.40, MIM (inside CR850/CR950) v5.2.b9 Requirements: CR500 v3.6, MIM (inside CR500) v5.2.b14 Requirements: MIM200 v6.1, 8500 v1.34 Note: This setup is basically also valid for 25 PS computer Note: This setup is basically also valid for 8800/8500 Dual camera
by basically using the correspondent Model into MIM200 Destination Note: CR always sends 2:1 format Portrait-1column-2 rows, with images 90-degree rotated,
therefore some limitations are present if the format 2:1 side by side is wished Note: if images are printed too dark, set TFT=Siews87b.w87 to print them lighter (see below) CR Setup, from Service Functions/Login/Exit to Desktop, into MIM Service: n on Configure, Network: n Computer Name=eg CRMIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Destination, Add, Print, Network, Qualified, MIM/8500, Set:
n General: Log.Name=8500, IPAddr=accordingly, Database=MIM/8500 n General: Model=8500, Memory=32 n Media Info: Media=11x14in, 3388x4277, 4187, (Blue) n DICOM Info: Protocol=DICOM 3.0, Service Class=Basic Grayscale Print n DICOM Info: Port=5040, AE Title=NER_8500, Counters=40, Timers=100 n Supported Items: Collation=On, Common Text=On, Tonescaling=On n Supported Items: Remote Image Deletion=On, Rotation=On
n Interpolation: No Magnif=On, Bilinear=On, Replic=On, Cubic Spline=On n Interpolation: Cubic Convolution 2=On, Cubic Convolution 3=On n Format Types: Custom Formats=On, Slide Format=On, Row Symm.=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
Kodak DryView 8500 PlusKodak MIM 200
DICOM Network
3M 8700 DryView
Fiber Cable
Fiber Cable
Kodak DirectView CR 800
Setup Manual for Kodak CR 800 / 900 / 500 / 850 / 950 with LASER IMAGER Products
Author: [email protected], Edition: May ´05 21
n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On n Formatting: Req.Size Scale=On, Req.Size Mix in Row=On, Trim=On
n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On
n Formatting: True Landscape=On n Formatting: Max Img Band=4, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width when enabled=2, Trim Width when disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n SCU: Density Space= On, Perception LUT =On n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7
MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8500, Set:
n General: Log.Name=8500 n General: Database Name=8500, Model=8500, Memory=32 n Media Info: Media=11x14in, 3388x4283, 4193, Blue n Output Params: Cmd=SuperSet,Baud=19200,Data=8,Stop=1,Parity=None n Output Params: Pixel=12, Header/Line, Transfer=2000 KHz, Acq=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7
n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT= Wrkstn2a.w87 (or Siews87b.w87) (Always=Y) n Contrast (dry)=2 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off
Setup Manual for Kodak CR 800 / 900 / 500 / 850 / 950 with LASER IMAGER Products
Author: [email protected], Edition: May ´05 22
n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=5 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=11INx14IN (Always=N), Negotiate Color Print=Off
8500 Plus Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=12, Header/Line, Parity= Disable Even, Port=0, Timeout=60
Setup Manual for Kodak CR 800 / 900 / 500 / 850 / 950 with LASER IMAGER Products
Author: [email protected], Edition: May ´05 23
Kodak CR 800 / CR 900 / CR 500 / CR 850 / CR 950 via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /
Kodak DryView 8100 LASER IMAGER
Requirements: CR800/CR900 v3.0 or v3.2, MIM (inside CR800/CR900) v5.0.b21 Requirements: CR800/CR900 v3.33, MIM (inside CR800/CR900) v5.2.b9 Requirements: CR850/CR950 v3.40, MIM (inside CR850/CR950) v5.2.b9 Requirements: CR500 v3.6, MIM (inside CR500) v5.2.b14 Requirements: MIM200 v6.1, 8100 v2.4.1 Note: This setup is basically also valid for 25 PS computer Note: CR always sends 2:1 format Portrait-1column-2 rows, with images 90-degree rotated,
therefore some limitations are present if the format 2:1 side by side is wished Note: if images are printed too dark, set TFT=Siews87b.w87 to print them lighter (see below) CR Setup, from Service Functions/Login/Exit to Desktop, into MIM Service: n on Configure, Network: n Computer Name=eg CRMIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Destination, Add, Print, Network, Qualified, MIM/8100, Set:
n General: Log.Name=8100, IPAddr=accordingly, Database=MIM/8100 n General: Model=8100, Memory=32 n Media Info: Media=35x43cm, 4096x5217, 5127, (Blue) n DICOM Info: Protocol=DICOM 3.0, Service Class=Basic Grayscale Print n DICOM Info: Port=5040, AE Title=NER_8100, Counters=40, Timers=100 n Supported Items: Collation=On, Common Text=On, Tonescaling=On n Supported Items: Remote Image Deletion=On, Rotation=On n Interpolation: No Magnif=On, Bilinear=On, Replic=On, Cubic Spline=On n Interpolation: Cubic Convolution 2=On, Cubic Convolution 3=On n Format Types: Custom Formats=On, Slide Format=On, Row Symm.=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On n Formatting: Req.Size Scale=On, Req.Size Mix in Row=On, Trim=On
Kodak DryView 8100Kodak MIM 200
DICOM Network
COPCIL BoardCopper Cable Control 9-pin
Data 37-pin
RS4229-pole Plug
Kodak DirectView CR 800
Setup Manual for Kodak CR 800 / 900 / 500 / 850 / 950 with LASER IMAGER Products
Author: [email protected], Edition: May ´05 24
n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2, n Formatting: Trim Width when enabled=2, Trim Width when disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n SCU: Density Space= On, Perception LUT=On n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7
MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8100, Set:
n General: Log.Name=8100 n General: Database Name=8100, Model=8100, Memory=32 n Media Info: Media=35x43cm, 4096x5223, 5133, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=12, Header/Line, Transfer=1000 KHz, Acquire=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7
n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT= Wrkstn2a.w87 (or Siews87b.w87) (Always=Y) n Contrast (dry)=2 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=5 (Always=N)
Setup Manual for Kodak CR 800 / 900 / 500 / 850 / 950 with LASER IMAGER Products
Author: [email protected], Edition: May ´05 25
n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off
8100 Setup on CONFIGURATION Menu: n on SIB board (ie external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=90, P1,…,P6=0
n on IMAGE QLTY-> Mag Scaling=Off, Pixel Correct=Off, 952 Override=Off n on IMAGE QUALITY-> TFT FILES Menu: TFT=Ver693c0.w87 n on LOCAL PANEL Menu: Contrast=6, Density=3.00 n on SYSTEM Menu: Acquire=Digital, Max.Img.Columns=4361 n on DIGITAL Menu: Pixel Depth=12, Header/Line, Parity=Even
Setup Manual for Kodak CR 800 / 900 / 500 / 850 / 950 with LASER IMAGER Products
Author: [email protected], Edition: May ´05 26
Kodak CR 800 / CR 900 / CR 500 / CR 850 / CR 950 via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /
Kodak DryView 8300 LASER IMAGER
Requirements: CR800/CR900 v3.0 or v3.2, MIM (inside CR800/CR900) v5.0.b21 Requirements: CR800/CR900 v3.33, MIM (inside CR800/CR900) v5.2.b9 Requirements: CR850/CR950 v3.40, MIM (inside CR850/CR950) v5.2.b9 Requirements: CR500 v3.6, MIM (inside CR500) v5.2.b14 Requirements: MIM200 v6.1, 8300 v4.9.1, 8300 LUT v3.0.3B Note: This setup is basically also valid for 25 PS computer Note: CR always sends 2:1 format Portrait-1column-2 rows, with images 90-degree rotated,
therefore some limitations are present if the format 2:1 side by side is wished Note: if images are printed too dark, set Contrast=4 to print them lighter (see below) CR Setup, from Service Functions/Login/Exit to Desktop, into MIM Service: n on Configure, Network: n Computer Name=eg CRMIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Destination, Add, Print, Network, Qualified, MIM/8300, Set:
n General: Log.Name=8300, IPAddr=accordingly, Database=MIM/8300 n General: Model=8300, Memory=32 n Media Info: Media=8x10in, 2256x2676, 2596, (Blue) n DICOM Info: Protocol=DICOM 3.0, Service Class=Basic Grayscale Print n DICOM Info: Port=5040, AE Title=NER_8300, Counters=40, Timers=100 n Supported Items: Collation=On, Common Text=On, Tonescaling=On n Supported Items: Remote Image Deletion=On, Rotation=On
n Interpolation: No Magnif=On, Bilinear=On, Replic=On, Cubic Spline=On n Interpolation: Cubic Convolution 2=On, Cubic Convolution 3=On n Format Types: Custom Formats=On, Slide Format=On, Row Symm.=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On n Formatting: Req.Size Scale=On, Req.Size Mix in Row=On, Trim=On
Kodak DryView 8300Kodak MIM 200
DICOM Network
Control 9 pin
Data 37 pin
COPCIL board Copper Cable
Kodak DirectView CR 800
Setup Manual for Kodak CR 800 / 900 / 500 / 850 / 950 with LASER IMAGER Products
Author: [email protected], Edition: May ´05 27
n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On
n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width when enabled=2, Trim Width when disabled=0 n Formatting: Pixel Pitch=11.9048 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3 n SCU: Density Space= On, Perception LUT=On n M952 Usage: Min H/V Mag=1, Max H/V Mag=16, Min Dmax 952=1.5
MIM200 Setup: n on Configure, Network:
n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, 8300, Set: n General: Log.Name=8300 n General: Database Name=8300, Model=8300, Memory=32 n Media Info: Media=8x10in, 2256x2676, 2596, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=8, Header/Line, Transfer=2000 KHz, Acquire=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On, SuperSlide=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=11.811 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3 n M952 Usage: Min H/V Mag=1, Max H/V Mag=16, Min Dmax 952=1.5
n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT= wkstn83a.w8u (Always=Y), Contrast (dry)=1 (or 4) (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=2 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N)
Setup Manual for Kodak CR 800 / 900 / 500 / 850 / 950 with LASER IMAGER Products
Author: [email protected], Edition: May ´05 28
n Film Size=8INx10IN (Always=N), Negotiate Color Print=Off 8300 Setup: n on Operator Menu set: D=16, C=6, Sharp/Smooth=0 ie Auto n on Operator Menu set: Film Layout: 1 on 1=Portrait n on Service Menu set: Ratio=1.00, Serial=1200,8,1,Even,Comma,3M, Memory=16 n on Service Menu set: Digital Interface: Parity=Even, Modality Group=1
Setup Manual for Kodak CR 800 / 900 / 500 / 850 / 950 with LASER IMAGER Products
Author: [email protected], Edition: May ´05 29
Kodak CR 800 / CR 900 / CR 500 / CR 850 / CR 950 via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8610 LASER IMAGING SYSTEM / for Mammography
(see also 8600)
Requirements: CR800/CR900 v3.0 or v3.2, MIM (inside CR800/CR900) v5.0.b21 Requirements: CR800/CR900 v3.33, MIM (inside CR800/CR900) v5.2.b9 Requirements: CR850/CR950 v3.40, MIM (inside CR850/CR950) v5.2.b9 Requirements: CR500 v3.6, MIM (inside CR500) v5.2.b14 Requirements: MIM200 v6.1, 8610 v2.4 (if 8600 v2.5) Note: This setup is basically also valid for 25 PS computer Note: This setup is basically also valid for 8600 camera Note: CR always sends 2:1 format Portrait-1column-2 rows, with images 90-degree rotated,
therefore some limitations are present if the format 2:1 side by side is wished CR Setup, from Service Functions/Login/Exit to Desktop, into MIM Service: n on Configure, Network: n Computer Name=eg CRMIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Destination, Add, Print, Network, Qualified, MIM/8610, Set: n General: Log.Name=8610, IPAddr= accordingly, n General: Database Name=MIM/8610, Model=8610, Memory=32 n Media Info: Media=8x10in, 5025x6200, 6020, Blue n DICOM Info: Protocol=DICOM 3.0, Service Class=Basic Grayscale Print n DICOM Info: Port =5040, AE Title=NER_8610, Retry=40, Response=100 n Supported Item: Collation=On, Common Text=On, Tonescaling=On n Supported Item: Remote Image Deletion=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Interpolation: Cubic Conv.2=On, Cubic Conv.3=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On
Kodak DirectView CR 800
Kodak DryView 8610
Kodak MIM 200
DICOM Network
Control 9 pin
Data 37 pin
COPCIL board Copper Cable
Setup Manual for Kodak CR 800 / 900 / 500 / 850 / 950 with LASER IMAGER Products
Author: [email protected], Edition: May ´05 30
n Formatting: DICOM Annotation Box=On n Formatting: Req.Size Scale=On, Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=26.3158 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.5 n SCU: Density Space=On, Perception LUT =On n M952 Usage: Min H/V Mag=0.26, Max H/V Mag=16, Min Dmax 952=2 MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8610 (or 8600), Set:
n General: Log.Name=8610 (or 8600), n General: Database=8610 (or 8600), Model=8610 (or 8600), Memory=32 n Media Info: Media=8x10in, 5025x6200, 6020, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=12 (8 if 8600), Header/Line, Transfer=2000,Acq=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=25.8065 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.5 n M952 Usage: Min H/V Mag=0.26, Max H/V Mag=16, Min Dmax 952=2
n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT= upmsv3kp.w8u (Always=N), Contrast (dry)=6 (Always=Y) n Modality Group=1, Conv.Group=1, Gamma Table=Linear in Density n Image Dmin=0.00 (Always=N), Image Dmax=3.50 (Always=Y) n Smoothing Type=1 (Always=Y), Image Polarity=Normal (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off
Setup Manual for Kodak CR 800 / 900 / 500 / 850 / 950 with LASER IMAGER Products
Author: [email protected], Edition: May ´05 31
n Modality ID=Off, Annotation Override=Off (Always=N) n Minify/Scale=On, Crop=Off, Text Box Relocation=None n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n Film Base=Blue Film (Always=N), Film Size=8INx10IN (Always=N) n Negotiate Color Print=Off
8610 Setup: on 8610 Operator Menu into Test Menu, Software Version, verify:
n Imager=2.4, VRTX32=1.08, Contrast=6.P.2, Conv.Kernel=M.1.0 n (if 8600: Imager=2.5, Contrast=6.G.7, Conv.Kernel=1.0.5)
n on 8610 Operator Menu into Configure User set: n Density=16, Contrast=6, Sharp/Smooth=1, Film Layout: 1 on 1=Portrait n Gamma= Xmittance, Image Size=Scale To Fit, Detector Size= don’t care
n on 8610 Service Menu into Configure User set: n Ratio=1.00, Serial Control Intf.=1200,8,1,Even,Comma,3M, Memory=127 n Digital Interface: Parity=Even, Modality Group=1, Smoothing Group=1
Setup Manual for Kodak CR 800 / 900 / 500 / 850 / 950 with LASER IMAGER Products
Author: [email protected], Edition: May ´05 32
Kodak CR 800 / CR 900 / CR 500 / CR 850 / CR 950 via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /
Kodak DryView 8200 LASER IMAGER
Requirements: CR800/CR900 v3.0 or v3.2, MIM (inside CR800/CR900) v5.0.b21 Requirements: CR800/CR900 v3.33, MIM (inside CR800/CR900) v5.2.b9 Requirements: CR850/CR950 v3.40, MIM (inside CR850/CR950) v5.2.b9 Requirements: CR500 v3.6, MIM (inside CR500) v5.2.b14 Requirements: MIM200 v6.1, 8200 v3.5 Note: This setup is basically also valid for 25 PS computer Note: CR always sends 2:1 format Portrait-1column-2 rows, with images 90-degree rotated,
therefore some limitations are present if the format 2:1 side by side is wished Note: if images are printed too dark, set TFT=Siews87b.w87 to print them lighter (see below) CR Setup, from Service Functions/Login/Exit to Desktop, into MIM Service: n on Configure, Network: n Computer Name=eg CRMIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Destination, Add, Print, Network, Qualified, MIM/8200, Set:
n General: Log.Name=MIM8200, IPAddr=accordingly n General: Database Name=MIM/8200, Model=8200, Memory=32 n Media Info: Media=35x43cm, 4361x5223, 5133, Any (Blue,Clear) n Media Info: Media=35x35cm, 4361x4247, 4157, Any (Blue,Clear) n Media Info: Media=11x14in, 3272x4361, 4271, Any (Blue,Clear) n DICOM Info: Protocol=DICOM 3.0, Service Class=Basic Grayscale Print n DICOM Info: Port=5040, AE Title=NER_8200, Counters=40, Timers=100 n Supported Items: Collation=On, Common Text=On, Tonescaling=On n Supported Items: Remote Image Deletion=On, Rotation=On n Interpolation: No Magnif=On, Bilinear=On, Replic=On, Cubic Spline=On n Interpolation: Cubic Convolution 2=On, Cubic Convolution 3=On n Format Types: Custom Formats=On, Row Symm.=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On
Kodak DirectView CR 800
Kodak MIM 200
DICOM Network
CrossedNetwork Cable
Kodak DryView 8200
Setup Manual for Kodak CR 800 / 900 / 500 / 850 / 950 with LASER IMAGER Products
Author: [email protected], Edition: May ´05 33
n Formatting: DICOM Annotation Box=On n Formatting: Req.Size Scale=On, Req.Size Mix Row=On n Formatting: Trim=On, Aspect Ratio Mix in Row=On, n Formatting: Image Size Mix in Row=On, Req.Image Size=On, n Formatting: Req.Size Mix on Page=On, True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width when enabled=2, Trim Width when disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n SCU: Density Space= On, Variable Border=On, Perception LUT=On n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7
MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8200, Set:
n General: Log.Name=8200, IPAddr=100.100.100.40, n General: Database Name=8200, Model=8200, Memory=32 n Media Info: Media=35x43cm, 4361x5223, 5133, Any (Blue,Clear) n Media Info: Media=35x35cm, 4361x4247, 4157, Any (Blue,Clear) n Media Info: Media=11x14in, 3272x4361, 4271, Any (Blue,Clear) n Supported Item: Collation=On, Common Text=On, Tonescaling=On n Supported Item: Remote Image Deletion=On, Rotation=On n Interpolation: No Magnification=On, Bilin=On, Repl=On n Interpolation: Cubic Spline=On, Cubic Convolution 2=On n Format Types: Custom=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n SCU: Density Space= On, Variable Border=On, PLUT Service= On n SCU: Curve Shape Tonescaling=On, Perception LUT Tonescaling=On n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7
n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT= Wrkstn2a.w87 (or Siews87b.w87) (Always=Y) n Contrast (dry)=2 (Always=N)
Setup Manual for Kodak CR 800 / 900 / 500 / 850 / 950 with LASER IMAGER Products
Author: [email protected], Edition: May ´05 34
n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=5 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off
8200 Setup on CONFIGURATION Menu: n on IMAGE QUALITY-> TFT FILES Menu: TFT=Ver693c0.w87 n on LOCAL PANEL Menu: Contrast=6, Density=3.00 n on DICOM Menu: SCU Config.: AE=MIM, TFT=VER693C0, C=6, Smooth=0 n on DICOM Menu: DICOM Config.: AE=NER_ANY, Port=1025
Setup Manual for Kodak CR 800 / 900 / 500 / 850 / 950 with LASER IMAGER Products
Author: [email protected], Edition: May ´05 35
Kodak CR 800 / CR 900 / CR 500 / CR 850 / CR 950 via DICOM with Kodak DryView 8900 LASER IMAGER
Requirements: CR800/CR900 v3.33, MIM (inside CR800/CR900) v5.2.b9 Requirements: CR850/CR950 v3.40, MIM (inside CR850/CR950) v5.2.b9 Requirements: CR500 v3.6, MIM (inside CR500) v5.2.b14 Requirements: CR v4.1 (MIM inside CR v6.2.b16) Requirements: 8900 rev.E ie rel.2.11 (ie DRE v2.11, MIM v5.6.b5, MCS v2.10) Note: into CR another printer eventually should be declared to print 10x12 on 8900 with:
General: Log.Name=890010x12, IPAddr=accordingly General: Database=unqualif. (or 8900), Model=8900, Memory=32 DICOM Info: Port=5040, AE Title=NER_890010x12 Into 8900 Config., DICOM SCP, SCP Services, select 890010x12 modality, Modify: Film Size=10INx12IN (Always=Y), all other 8900 settings as below
Note: CR always sends 2:1 format Portrait-1column-2 rows, with images 90-degree rotated, therefore some limitations are present if format 2:1 side by side is wished
Note: if images printed too dark, set TFT=Siews87b.w87 to print them lighter (see below) CR v3.3/3.4/3.6/4.1 Setup, Serv.Functions/Login/Exit to Desktop, in MIM Service: n on Configure, Network: n Computer Name=eg CRMIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Destination, Add, Print, Network, Unqualif. (or 8900), Set:
n General: Log.Name=8900, IPAddr=accordingly n General: Database=unqualif. (or 8900), Model=8900, Memory=32 n Media Info: Media=35x43cm, 9100x11037, 10781, (Blue) n Media Info: Media=35x35cm, 9100x9087, 8831, (Blue)
n Media Info: Media=11x14in, 7137x9100, 8844, (Blue) n Media Info: Media=10x12in, 6490x7767, 7511, (Blue) n Media Info: Media=8x10in, 5167x6490, 6234, (Blue)
n DICOM Info: Protocol=DICOM 3.0, Service Class=Basic Grayscale Print n DICOM Info: Port=5040, AE Title=NER_8900, Counters=40, Timers=100 n Supported Items: Collation=On, Common Text=On, Tonescaling=On n Supported Items: Remote Image Deletion=On, Rotation=On n Interpolation: No Magnif=On, Bilinear=On, Replic=On, Cubic Spline=On
Kodak DryView 8900
DICOM Network
Kodak DirectView CR 800
Setup Manual for Kodak CR 800 / 900 / 500 / 850 / 950 with LASER IMAGER Products
Author: [email protected], Edition: May ´05 36
n Interpolation: Cubic Convolution 2=On, Cubic Convolution 3=On n Format Types: Custom Formats=On, Row Symm.=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On n Formatting: Req.Size Scale=On, Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=7, Max Band per Page=7, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=4, Min Vert Sep=4 n Formatting: Trim Width when enabled=4, Trim Width when disabled=0 n Formatting: Pixel Pitch=25.5910 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.3 n SCU: Density Space= On, Perception LUT =On n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7
8900 Setup: n on Configuration, System, Network: n Host Name=DV8900, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configuration, DICOM SCP, Communications:
n Port=5040, Association Limit=12, Source Name=DICOM n on Configuration, Destination:
n General: Log.Name=8900 n Media Types: Media=35x43cm, 9100x11037, 10781, Any n Media Types: Media=35x35cm,9100x9087, 8831, Any n Media Types: Media=11x14in, 7137x9100, 8844, Any n Media Types: Media=10x12in, 6490x7767, 7511, Any
n Media Types: Media=8x10in, 5167x6490, 6234, Any n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On n Formatting: DICOM Annotation Box=On, Req.Image Size=On n Formatting: Req.Size Scale=On, Req.Size Mix Page=On n Formatting: Req.Size Mix Row=On, Trim=On, n Formatting: True Landscape=On, Rotation=On n Formatting: Minify/Crop=On, Tonescaling on Image Basis=On n Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0 n Formatting: Max Img Rows=0, Pixel Pitch=25.5910, Min Horiz Sep=4 n Formatting: Min Vert Sep=4, Trim Width Enabled=4 n Formatting: Trim Width Disabled=0, Maximum DMAX=3.30
n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify: n Negotiate Presentation LUT=No, Negotiate Color Print=No n TFT= Wrkstn2a.w87 (or Siews87b.w87) (Always=N) n Contrast=2 (Always=N) n Smoothing Type=5 (Always=N), Image Polarity (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=No (Always=Y), Warnings=Yes n Print Priority=Normal (Always=N), Border=3.99 (Always=N)
Setup Manual for Kodak CR 800 / 900 / 500 / 850 / 950 with LASER IMAGER Products
Author: [email protected], Edition: May ´05 37
n 2mm Border=Yes, Film Clip Border=No, Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Sorter Bin=Bin1 (Always=N) n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No n Modality ID=No, Annotation Override=No, Density Patch=No n Image Resizing=Minify/Scale (Always=N) n Text Box Location=None, Source ID=cr
Setup Manual for Kodak CR 800 / 900 / 500 / 850 / 950 with LASER IMAGER Products
Author: [email protected], Edition: May ´05 38
Kodak CR 800 / CR 900 / CR 500 / CR 850 / CR 950 via DICOM with Kodak DryView 8150 LASER IMAGER
Requirements: CR v4.1 (MIM inside CR v6.2.b16) Requirements: 8150 v0.08.b6 (DRE=DV8150_DRE_0.08.b6, MIM=MIM_v5.7.b6) CR Setup, Serv.Functions/Login/Exit to Desktop, into MIM Service: n on Configure, Network: n Computer Name=eg CRMIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Destination, Add, Print, Network, Unqualif.(or MIM/8200), Set:
n General: Log.Name=DV8150, IPAddr=accordingly n General: Database=unqualif., Model=8200, Memory=32 n Media Info: Media=35x43cm, 4438x5390, 5262, (Blue) n Media Info: Media=35x35cm, 4438x4414,4286, (Blue)
n Media Info: Media=11x14in, 3440x4438, 4310, (Blue) n DICOM Info: Protocol=DICOM 3.0, Service Class=Basic Grayscale Print n DICOM Info: Port=5040, AE Title=NER_8150, Counters=40, Timers=100 n Supported Items: Collation=On, Common Text=On, Tonescaling=On n Supported Items: Remote Image Deletion=On, Rotation=On n Interpolation: No Magnif=On, Bilinear=On, Replic=On, Cubic Spline=On n Interpolation: Cubic Convolution 2=On, Cubic Convolution 3=On n Format Types: Custom Formats=On, Row Symm.=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On n Formatting: Req.Size Scale=On, Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=7, Max Band per Page=7, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=4, Min Vert Sep=4 n Formatting: Trim Width when enabled=4, Trim Width when disabled=0 n Formatting: Pixel Pitch=25.5910
Kodak DryView 8150
DICOM Network
Kodak DirectView CR 800
Setup Manual for Kodak CR 800 / 900 / 500 / 850 / 950 with LASER IMAGER Products
Author: [email protected], Edition: May ´05 39
n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.3 n SCU: Density Space= On, Perception LUT =On n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7
8150 Setup: n on Configuration, System, Network: n Host Name=DV8150DRE, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configuration, DICOM SCP, Communications:
n Port=5040, Association Limit=12, Source Name=DICOM n on Configuration, Destination:
n AE Title: Log.Name=DV8150 n Media Types: Media=35x43cm, 4438x5390, 5262, Any n Media Types: Media=35x35cm, 4438x4414,4286, Any n Media Types: Media=11x14in, 3440x4438, 4310, Any n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On n Formatting: DICOM Annotation Box=On, Req.Image Size=On n Formatting: Req.Size Scale=On, Req.Size Mix Page=On n Formatting: Req.Size Mix Row=On, Trim=On, n Formatting: True Landscape=On, Rotation=On n Formatting: Minify/Crop=On, Tonescaling on Image Basis=On n Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0 n Formatting: Max Img Rows=0, Pixel Pitch=12.8000, Min Horiz Sep=2 n Formatting: Min Vert Sep=2, Trim Width Enabled=2 n Formatting: Trim Width Disabled=0, Maximum DMAX=3.10
n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify: n Negotiate Presentation LUT=No, Negotiate Color Print=No, n TFT Set Name=Wrkstn2a.w87 (Always=Y) n Contrast=1 (Always=N), Smoothing Type=5 (Always=N) n Dmin=0.00 (Always=N), Dmax=3.00 (Always=N) n Image Polarity=Normal (Always=N) n NeventReports=No (Always=Y), Warnings=Yes n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n 2mm Border=Yes, Film Clip Border=No, n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N) n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No, n Modality ID=No, Annotation Override=No, Density Patch=No n Image Resizing=Minify/Scale (Always=N), n Text Box Location=None, Source ID=cr
Setup Manual for Kodak CR 800 / 900 / 500 / 850 / 950 with LASER IMAGER Products
Author: [email protected], Edition: May ´05 40
Kodak CR 800 / CR 900 / CR 500 / CR 850 / CR 950 via DICOM with Kodak Color Medical Imager 1000
Requirements: CR v4.32 (MIM inside CR v6.2.b21) Requirements: CMI-1000 v1.0.b8 (DRE=v1.0.b8, MIMCore=v2.0.b3) CR Setup, Serv.Functions/Login/Exit to Desktop, in MIM Service: n on Configure, Network: n Computer Name=eg CRMIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Destination, Add, Print, Network, Qualified, MIM/8300, Set:
n General: Log.Name=8300, IPAddr=accordingly, Database=MIM/8300 n General: Model=8300, Memory=32 n Media Info: Media=8x10in, 2256x2676, 2596, (Blue) n DICOM Info: Protocol=DICOM 3.0, Service Class=Basic Grayscale Print n DICOM Info: Port=5040, AE Title=CMI1000, Counters=40, Timers=100 n Supported Items: Collation=On, Common Text=On, Tonescaling=On n Supported Items: Remote Image Deletion=On, Rotation=On n Interpolation: No Magnif=On, Bilinear=On, Replic=On, Cubic Spline=On n Interpolation: Cubic Convolution 2=On, Cubic Convolution 3=On n Format Types: Custom Formats=On, Slide Format=On, Row Symm.=Off n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On n Formatting: Req.Size Scale=On, Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width when enabled=2, Trim Width when disabled=0 n Formatting: Pixel Pitch=11.9048 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3 n SCU: Density Space= On, Perception LUT=On
DICOM Network
Kodak DirectView CR
Kodak CMI 1000
Setup Manual for Kodak CR 800 / 900 / 500 / 850 / 950 with LASER IMAGER Products
Author: [email protected], Edition: May ´05 41
n M952 Usage: Min H/V Mag=1, Max H/V Mag=16, Min Dmax 952=1.5 CMI-1000 Setup: at Local Panel, under Media, set A4 or Letter ie what inside Paper Tray (CMI-1000 sw considers only this field and uses it as A4 or Letter (Always=Y): at Local Panel, under Menu, Imager Setup: n Network Setup: n IPAddr=accordingly, Subnet Mask=accordingly, Gateway=accordingly n under More Settings: DICOM Port=5040 n Edit Host Name/AE Title=CMI1000 n Modality (SCU) Config (or after modality recognition): n Select Modality=accordingly, Modality Config.Assistant=Yes, Reset Config=No n Note: Color IQ settings used when images sent with Color DICOM SOP n under Image Quality, Color Image Quality: (no need to adjust, leave defaults)
n Match Monitor Colors=default ie sRGB Color Space Profile.icm n Adjust Color Tones=default ie Default_Contrast_100.icm
n Note: Grayscale IQ settings used when images sent with Grayscale DICOM SOP: n under Image Quality, Grayscale Image Quality:
n Contrast=7 (Always=Y) n TFT Set (From list)=Wrkstn2a.w87 (Always=Y) n Wet Contrast=0 (Always=N), Curve Shape=429 (Always=N) n under More Quality Settings: n Tonescaling=Presentation LUT (Always=N), n Image Dmax=220 (Always=N), Image Dmin=10 (Always=N) n Smoothing=11 (Always=Y), Polarity=Positive (Always=N) n Interpolation=CUBIC (Always=N), Trim=No (Always=N) n Page Orientation=PORTRAIT (Always=N), Negotiate PLUT=No
n under Modality Defaults: n Media Size=8.5x11 (Always=N), don’t care, this field plays no role n Image Resizing=Minify (Always=N), n Priority=Normal (Always=N), NeventReports=No (Always=Y), n Warnings=Yes, Color=Yes n (set Color=No when only b/w images are printed and set it to be sure n to apply to the b/w images the Greyscale Image Quality settings) n Page Annotation: n Hosp.Name=No, Modality ID=No, Page Nbr=No, Date=No, Time= No
n Save Changes and Exit
Setup Manual for Kodak CR 850 / 950 for Mammography with LASER IMAGER Products
Author: [email protected], Edition: May ´05 1
TENTATIVE Setup for Kodak DirectView CR for Mammography with LASER IMAGERS Connection via DICOM: n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /
Kodak DryView 8610 LASER IMAGING SYSTEM / for Mammography (1)................ 2 n Kodak DryView 8900 LASER IMAGER with Mammography Accessory...................... 4
1 Setup valid also for Kodak PACS LINK 25 PRINT SERVER.
Setup Manual for Kodak CR 850 / 950 for Mammography with LASER IMAGER Products
Author: [email protected], Edition: May ´05 2
Kodak CR 850 / CR 950 for Mammography via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8610 LASER IMAGING SYSTEM / for Mammography
Requirements: CR850/950 Mammo v4.32 (MIM inside CR v6.2.b21) Requirements: MIM200 v6.1, 8610 v2.4 CR Setup, from Service Functions/Login/Exit to Desktop, into MIM Service: n on Configure, Network:
n Computer Name=eg CRMIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Destination, Add, Print, Network, Qualified, MIM/8610, Set: n General: Log.Name=8610, IPAddr= accordingly, n General: Database Name=MIM/8610, Model=8610, Memory=32 n Media Info: Media=8x10in, 5025x6200, 6020, Blue n DICOM Info: Protocol=DICOM 3.0, Service Class=Basic Grayscale Print n DICOM Info: Port =5040, AE Title=NER_8610, Retry=40, Response=100 n Supported Item: Collation=On, Common Text=On, Tonescaling=On n Supported Item: Remote Image Deletion=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Interpolation: Cubic Conv.2=On, Cubic Conv.3=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On n Formatting: Req.Size Scale=On, Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=26.3158 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.5 n SCU: Density Space=On, Perception LUT =On
Kodak DryView 8610
Kodak MIM 200
DICOM Network
Control 9 pin
Data 37 pin
COPCIL board Copper Cable
Kodak DirectView CR 850 / 950 Mammo
Setup Manual for Kodak CR 850 / 950 for Mammography with LASER IMAGER Products
Author: [email protected], Edition: May ´05 3
n M952 Usage: Min H/V Mag=0.26, Max H/V Mag=16, Min Dmax 952=2 MIM200 Setup: n on Configure, Network: Node Name=MIM, IPAddr=accordingly, n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8610, Set:
n General: Log.Name=8610,Database=8610,Model=8610,Memory=32 n Media Info: Media=8x10in, 5025x6200, 6020, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=12, Header/Line, Transfer=2000,Acq=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix Row=On, Trim=On, True Landscape=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=25.8065 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.5 n M952 Usage: Min H/V Mag=0.26, Max H/V Mag=16, Min Dmax 952=2
n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n Contrast (dry)=6 (Always=Y) n Modality Group=1 (which corresponds to TFT/ULUT=upmsv3kp.w8u), n Conv.Group=1, Gamma Table=Linear in Density n Image Dmin=0.00 (Always=N), Image Dmax=3.50 (Always=Y) n Smoothing Type=1 (Always=Y), Image Polarity=Normal (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Minify/Scale=On, Crop=Off, Text Box Relocation=None n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n Film Base=Blue Film (Always=N), Film Size=8INx10IN (Always=N)
8610 Setup: on 8610 Operator Menu into Test Menu, Software Version, verify: n Imager=2.4, VRTX32=1.08, Contrast=6.P.2, Conv.Kernel=M.1.0
n on 8610 Operator Menu into Configure User set: n Density=16, Contrast=6, Sharp/Smooth=1, Film Layout: 1 on 1=Portrait n Gamma= Xmittance, Image Size=Scale To Fit, Detector Size= don’t care
n on 8610 Service Menu into Configure User set: n Ratio=1.00, Serial=1200,8,1,Even,Comma,3M, Memory=127 (or 255) n Digital Interface: Parity=Even, Modality Group=1, Smoothing Group=1
Setup Manual for Kodak CR 850 / 950 for Mammography with LASER IMAGER Products
Author: [email protected], Edition: May ´05 4
Kodak CR 850 / CR 950 for Mammography via DICOM with Kodak DryView 8900 LASER IMAGER with Mammography Accessory
Requirements: CR850/950 Mammo v4.32 (MIM inside CR v6.2.b21) Requirements: 8900 rev.E ie v2.11 (ie DRE v2.11, MIM v5.6.b5, MCS v2.10) Note: 8900 sw v2.13 patch left-justifies mammo-images to reduce border Note: into CR another printer eventually should be declared to print 10x12 on 8900:
General: Log.Name=8900_10x12, IPAddr=accordingly General: Database=unqualif. (or 8900), Model=8900, Memory=32 DICOM Info: Port=5040, AE Title=NER_8900_10x12 Into 8900 Config., DICOM SCP, SCP Services, select 890010x12 modality, Modify: Film Size=10INx12IN (Always=Y), all other 8900 settings as below
CR Setup, Serv.Functions/Login/Exit to Desktop, in MIM Service: n on Configure, Network:
n Computer Name=eg CRMIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Destination, Add, Print, Network, 8900, Set: n General: Log.Name=8900_8x10, IPAddr=accordingly n General: Database=8900, Model=8900, Memory=32 n To print 8x10 only, leave unselected all other formats n Media 35x43cm=Off, 9100x11037, 10781, Blue n Media: 35x35cm=Off, 9100x9087, 8831, Blue n Media 11x14in=Off, 7137x9100, 8844, Blue n Media 10x12in=Off, 6490x7767, 7511, Blue n Media: 8x10in=On, 5167x6490, 6234, Blue n Do similarly (ie only 10x12in=On) for a destination 8900_10x12 only n DICOM: Protocol=DICOM 3.0, Service Class=Basic Grayscale Print n DICOM: Port=5040, AE Title=NER_8900, Retry=40, Response=100 n Supported Items: Collation=On, Common Text=On, Tonescaling=On n Supported Items: Pivot Density=Off, Print Quality=Off n Supported Items: Remote Image Deletion=On, Rotation=On n Interpolation: No Magnif=On, Bilinear=On, Replic=On, Cubic Spline=On
Kodak DryView 8900 Mammo
DICOM Network
Kodak DirectView CR 850 / 950 Mammo
Setup Manual for Kodak CR 850 / 950 for Mammography with LASER IMAGER Products
Author: [email protected], Edition: May ´05 5
n Interpolation: Cubic Convolution 2=On, Cubic Convolution 3=On n Formats: Custom Formats=On, Row Symm.=On n Formats: Slide=Off, Super Slide=Off n Formats: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On n Formatting: Req.Size Scale=On, Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=7, Max Band per Page=7, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=4, Min Vert Sep=4 n Formatting: Trim Width when enabled=4, Trim Width when disabled=0 n Formatting: Pixel Pitch=25.5910 n Image Processing: Color=Off, Color/Grayscale same page=Off n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.3 n SCU: Density Space= On, Variable Border=On, Perception LUT =On n SCU: Negotiate Storage Commitment Service=Disabled n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7
8900 Setup: n on Configuration, System, Network:
n Host Name=DV8900, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr= accordingly
n on Configuration, System, Software License: n License Status=Mammo Key is ON
n on Configuration, DICOM SCP, Communications: n Port=5040, Association Limit=12, Source Name=DICOM
n on Configuration, Destination: n General: Log.Name=8900 n Media Types: Media=35x43cm, 9100x11037, 10781, Any n Media Types: Media=35x35cm,9100x9087, 8831, Any n Media Types: Media=11x14in, 7137x9100, 8844, Any n Media Types: Media=10x12in, 6490x7767, 7511, Any n Media Types: Media=8x10in, 5167x6490, 6234, Any n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On n Formatting: DICOM Annotation Box=On, Req.Image Size=On n Formatting: Req.Size Scale=On, Req.Size Mix Page=On n Formatting: Req.Size Mix Row=On, Trim=On, n Formatting: True Landscape=On, Rotation=On n Formatting: Minify/Crop=On, Tonescaling on Image Basis=On n Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0 n Formatting: Max Img Rows=0, Pixel Pitch=25.5910, Min Horiz Sep=4 n Formatting: Min Vert Sep=4, Trim Width Enabled=4 n Formatting: Trim Width Disabled=0, Maximum DMAX=3.30
n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify: n Negotiate Presentation LUT=No, Negotiate Color Print=No n TFT= Wrkstn2a.w87 (Always=Y), Contrast=1 (Always=Y)
Setup Manual for Kodak CR 850 / 950 for Mammography with LASER IMAGER Products
Author: [email protected], Edition: May ´05 6
n Smoothing Type=15 (Always=Y), Image Polarity (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.60 (Always=Y) n NeventReports=No (Always=N), Warnings=Yes n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n 2mm Border=Yes, Film Clip Border=No, n Film Base=Mammo Blue Film (Always=Y) n Film Size=8INx10IN (Always=N), Sorter Bin=Bin1 (Always=Y) n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No n Modality ID=No, Annotation Override=No, Density Patch=No n Image Resizing=Minify/Scale (Always=N) n Text Box Location=None, Source ID=crm
Setup for Kodak DirectView DR 5000 / DR 9000 with LASER IMAGER Products
Author: [email protected], Edition: May ´05 1
TENTATIVE Setup for Kodak DirectView DR 5000 / 9000 with LASER IMAGERS Connection via DICOM: n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /
Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual and HQ)...... 2 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /
Kodak DryView 8500 LASER IMAGER / Plus (see also 8800/8500 Dual).................... 4 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /
Kodak DryView 8100 LASER IMAGER......................................................................... 6 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /
Kodak DryView 8300 LASER IMAGER......................................................................... 8 n Kodak Digital Science 190 MEDICAL LASER PRINTER......................................... 10 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /
Kodak Ektascan 2180 LASER PRINTER ....................................................................... 12 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /
Kodak Ektascan 1120 LASER PRINTER ....................................................................... 15 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /
Kodak Ektascan 160 LASER IMAGER .......................................................................... 18 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /
Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual and HQ) (1) . 21 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /
Kodak DryView 8500 LASER IMAGER / Plus (see also 8800/8500 Dual) (1)............... 24 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /
Kodak DryView 8100 LASER IMAGER (1).................................................................... 27 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /
Kodak DryView 8300 LASER IMAGER (1).................................................................... 30 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /
Kodak DryView 8200 LASER IMAGER (1).................................................................... 33 n Kodak DryView 8900 LASER IMAGER......................................................................... 36 n Kodak DryView 8150 LASER IMAGER......................................................................... 39 n Kodak Color Medical Imager 1000 ................................................................................. 42
1 Setup valid also for Kodak PACS LINK 25 PRINT SERVER.
Setup for Kodak DirectView DR 5000 / DR 9000 with LASER IMAGER Products
Author: [email protected], Edition: May ´05 2
Kodak DirectView DR 5000 / DR 9000 via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /
Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual and HQ)
Kodak DirectView-DR 5000-DR 9000
Kodak DryView 8700 PlusKodak 9410 PACS Link
DICOM Network
3M8700 DryView
Fiber Cable
Fiber Cable
Requirements: Kodak DR 5000 / DR 9000 v1.4 Requirements: 9410 v1.6, 8700 v1.34 Note: This setup is basically also valid for 8800/8700 Dual and HQ cameras
by basically using the correspondent Model into 9410 Local Printers Note: The 9410/8700 configuration can not print some formats (eg 2:1 side by side, etc), in this case the MIM200/8700 solve the problem ie print formats 2:1 side by side, etc DR 5000 / DR 9000 Setup: n Log as Service and under Service Tools n Go into menu DROC/Software Configuration/Add Software Resources n Browse Directory ./installable/vdevices n Browse Directory ./installable/vdevices/output n Browse Directory ./installable/vdevices/output/laser_cameras n Install Client side interface for Imation DryView camera connected via Dicom Print n Select Return to updated Software Configuration Page n Browse Directory ./installable/vdevices n Browse Directory ./installable/vdevices/output n Browse Directory ./installable/vdevices/output/laser_cameras n Edit Client side interface for Imation DryView camera connected via Dicom Print n Edit configuration file /linx_mp/resources/installed/raw/vdevdryview_002/dryview.cfg n factory object name=supplied by system, spooler name=DicomPrintSpooler, n priority=normal, max retries=20, device type=DV8700 or alias name, n device name (i.e., Aetitle)=9410, n device address (i.e., IPaddr : Port)=e.g., 150.224.150.22:1024 n request annotation SOP class=true, request print job SOP class=false, n print job poll period=15, print job timeout=300, printer poll period=15, n association timeout=0, collate=false, custom lut file= n CFG://HOLX0040/linx_mp/resources/installed/raw/customluts_001/linear.lut n Photometric interpr.=MONOCHROME2, copies=1, medium type=BLUE FILM,
Setup for Kodak DirectView DR 5000 / DR 9000 with LASER IMAGER Products
Author: [email protected], Edition: May ´05 3
n Film destination=PROCESSOR, Film Session Label=any text,memory allocation=0 n Print priority=MED, available image display formats= n PORTRAIT\1,1 PORTRAIT\1,2 PORTRAIT\2,1 PORTRAIT\2,2 n Image display format=PORTRAIT\1,1, annotation display format id=0 n Number of annotation boxes=1, annotation boxes per text line=1 n Max annotation box text string size=64, max text line size=64, film size id=14INX17IN n Film magnification type=CUBIC, film smoothing type=11, border density=BLACK n Empty image density=BLACK, full pixel range=true, min density=20, n max density=300, trim=NO, Configuration info=LUT=wrkstn2a.w87,2 n polarity=NORMAL, available image mag.types=REPLICATE BILINEAR CUBIC n image mag.type=CUBIC, image smoothing type=11, true size=true, pixel size=139 n true size width crop=0, true size length crop=0, pad=true, auto rotate=false, n apply ruler=false, annotation position=0, n text string=<PatientName+ID+Date+Institution> n Update n Log as Application n Edit/Setup/select an already existing entry/Copy/rename it e.g., DV8700 n into SETUP menu select the just created DV8700 n Edit/laser_cameras/select last entry e.g., vdevdryview _004/Add/Accept 9410 Setup: n on Device Setup, LOCAL PRINTERS:
n Printer=8700, Model=8700, Output=Fiber n Baud=19200, Parity=None, Data=8, Stop=1, Command Set=Superset n Pixel=12, Header/Line, Timeout=60, Transfer Rate=2 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=11 Max.Density=300, Contrast=6, Border Density=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87
n on Device Setup, SCP PRINTERS, Current Providers: n Printer=8700, AE Title=9410, Port=1024, Max Associations=5
n on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle=accordingly, SCU IPAddr=accordingly, SCP=8700 n Copies=1, Contrast Table=2, TFT/ULUT=Wrkstn2a.w87 n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=11 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0
8700 Plus Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=12, Header/Line, Parity=Enable Even, Port=0, Timeout=60
Setup for Kodak DirectView DR 5000 / DR 9000 with LASER IMAGER Products
Author: [email protected], Edition: May ´05 4
Kodak DirectView DR 5000 / DR 9000 via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /
Kodak DryView 8500 LASER IMAGER / Plus (see also 8800/8500 Dual)
Kodak DirectView-DR 5000-DR 9000
Kodak DryView 8500 PlusKodak 9410 PACS Link
DICOM Network
3M8700 DryView
Fiber Cable
Fiber Cable
Requirements: Kodak DR 5000 / DR 9000 v1.4 Requirements: 9410 v1.6, 8500 v1.34 Note: This setup is basically also valid for 8800/8500 Dual camera
by basically using the correspondent Model into 9410 Local Printers Note: The 9410/8500 configuration can not print some formats (eg 2:1 side by side, etc), in this case the MIM200/8500 solve the problem ie print formats 2:1 side by side, etc DR 5000 / DR 9000 Setup: n Log as Service and under Service Tools n Go into menu DROC/Software Configuration/Add Software Resources n Browse Directory ./installable/vdevices n Browse Directory ./installable/vdevices/output n Browse Directory ./installable/vdevices/output/laser_cameras n Install Client side interface for Imation DryView camera connected via Dicom Print n Select Return to updated Software Configuration Page n Browse Directory ./installable/vdevices n Browse Directory ./installable/vdevices/output n Browse Directory ./installable/vdevices/output/laser_cameras n Edit Client side interface for Imation DryView camera connected via Dicom Print n Edit configuration file /linx_mp/resources/installed/raw/vdevdryview_002/dryview.cfg n factory object name=supplied by system, spooler name=DicomPrintSpooler, n priority=normal, max retries=20, device type=DV8500 or alias name, n device name (i.e., Aetitle)=9410, n device address (i.e., IPaddr : Port)=e.g., 150.224.150.22:1024 n request annotation SOP class=true, request print job SOP class=false, n print job poll period=15, print job timeout=300, printer poll period=15, n association timeout=0, collate=false, custom lut file= n CFG://HOLX0040/linx_mp/resources/installed/raw/customluts_001/linear.lut n Photometric interpr.=MONOCHROME2, copies=1, medium type=BLUE FILM,
Setup for Kodak DirectView DR 5000 / DR 9000 with LASER IMAGER Products
Author: [email protected], Edition: May ´05 5
n Film destination=PROCESSOR, Film Session Label=any text,memory allocation=0 n Print priority=MED, available image display formats= n PORTRAIT\1,1 PORTRAIT\1,2 PORTRAIT\2,1 PORTRAIT\2,2 n Image display format=PORTRAIT\1,1, annotation display format id=0 n Number of annotation boxes=1, annotation boxes per text line=1 n Max annotation box text string size=64, max text line size=64, film size id=11INX14IN n Film magnification type=CUBIC, film smoothing type=11, border density=BLACK n Empty image density=BLACK, full pixel range=true, min density=20, n max density=300, trim=NO, Configuration info=LUT=wrkstn2a.w87,2 n polarity=NORMAL, available image mag.types=REPLICATE BILINEAR CUBIC n image mag.type=CUBIC, image smoothing type=11, true size=true, pixel size=139 n true size width crop=0, true size length crop=0, pad=true, auto rotate=false, n apply ruler=false, annotation position=0, n text string=<PatientName+ID+Date+Institution> n Update n Log as Application n Edit/Setup/select an already existing entry/Copy/rename it e.g., DV8500 n into SETUP menu select the just created DV8500 n Edit/laser_cameras/select last entry e.g., vdevdryview _004/Add/Accept 9410 Setup: n on Device Setup, LOCAL PRINTERS:
n Printer=8500, Model=8500, Output=Fiber n Baud=19200, Parity=None, Data=8, Stop=1, Command Set=Superset n Pixel=12, Header/Line, Timeout=60, Transfer Rate=2 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=11, Max.Density=300, Contrast=6, Border Density=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87
n on Device Setup, SCP PRINTERS, Current Providers: n Printer=8500, AE Title=9410, Port=1024, Max Associations=5
n on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle=accordingly, SCU IPAddr=accordingly, SCP=8500 n Copies=1, Contrast Table=2, TFT/ULUT=Wrkstn2a.w87 n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=11 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0
8500 Plus Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=12, Header/Line, Parity=Enable Even, Port=0, Timeout=60
Setup for Kodak DirectView DR 5000 / DR 9000 with LASER IMAGER Products
Author: [email protected], Edition: May ´05 6
Kodak DirectView DR 5000 / DR 9000 via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /
Kodak DryView 8100 LASER IMAGER
Kodak DirectView-DR 5000-DR 9000
Kodak DryView 8100Kodak 9410 PACS Link
DICOM Network
COPCIL BoardCopper Cable Control 9-pin
Data 37-pin
RS4229-pole Plug
Requirements: Kodak DR 5000 / DR 9000 v1.4 Requirements: 9410 v1.6, 8100 v2.4.1 Note: The 9410/8100 configuration can not print some formats (eg 2:1 side by side, etc), in this case the MIM200/8100 solve the problem ie print formats 2:1 side by side, etc DR 5000 / DR 9000 Setup: n Log as Service and under Service Tools n Go into menu DROC/Software Configuration/Add Software Resources n Browse Directory ./installable/vdevices n Browse Directory ./installable/vdevices/output n Browse Directory ./installable/vdevices/output/laser_cameras n Install Client side interface for Imation DryView camera connected via Dicom Print n Select Return to updated Software Configuration Page n Browse Directory ./installable/vdevices n Browse Directory ./installable/vdevices/output n Browse Directory ./installable/vdevices/output/laser_cameras n Edit Client side interface for Imation DryView camera connected via Dicom Print n Edit configuration file /linx_mp/resources/installed/raw/vdevdryview_002/dryview.cfg n factory object name=supplied by system, spooler name=DicomPrintSpooler, n priority=normal, max retries=20, device type=DV8100 or alias name, n device name (i.e., Aetitle)=9410, n device address (i.e., IPaddr : Port)=e.g., 150.224.150.22:1024 n request annotation SOP class=true, request print job SOP class=false, n print job poll period=15, print job timeout=300, printer poll period=15, n association timeout=0, collate=false, custom lut file= n CFG://HOLX0040/linx_mp/resources/installed/raw/customluts_001/linear.lut n Photometric interpr.=MONOCHROME2, copies=1, medium type=BLUE FILM, n Film destination=PROCESSOR, Film Session Label=any text,memory allocation=0 n Print priority=MED, available image display formats= n PORTRAIT\1,1 PORTRAIT\1,2 PORTRAIT\2,1 PORTRAIT\2,2
Setup for Kodak DirectView DR 5000 / DR 9000 with LASER IMAGER Products
Author: [email protected], Edition: May ´05 7
n Image display format=PORTRAIT\1,1, annotation display format id=0 n Number of annotation boxes=1, annotation boxes per text line=1 n Max annotation box text string size=64, max text line size=64, film size id=14INX17IN n Film magnification type=CUBIC, film smoothing type=11, border density=BLACK n Empty image density=BLACK, full pixel range=true, min density=20, n max density=300, trim=NO, Configuration info=LUT=wrkstn2a.w87,2 n polarity=NORMAL, available image mag.types=REPLICATE BILINEAR CUBIC n image mag.type=CUBIC, image smoothing type=11, true size=true, pixel size=139 n true size width crop=0, true size length crop=0, pad=true, auto rotate=false, n apply ruler=false, annotation position=0, n text string=<PatientName+ID+Date+Institution> n Update n Log as Application n Edit/Setup/select an already existing entry/Copy/rename it e.g., DV8100 n into SETUP menu select the just created DV8100 n Edit/laser_cameras/select last entry e.g., vdevdryview _004/Add/Accept 9410 Setup:
on Device Setup, LOCAL PRINTERS: n Printer=8100, Model=8100 4096 pxls/line, Output=Copper n Baud=1200, Parity=Even, Data=8, Stop=1, Command Set=952 n Pixel=12, Header/Line, Timeout=60, Transfer Rate=1 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=11, Max.Density=300, Contrast=6, Border Density=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87
on Device Setup, SCP PRINTERS, Current Providers: n Printer=8100, AE Title=9410, Port=1024, Max Associations=5
on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle=accordingly, SCU IPAddr=accordingly n SCP=8100, Copies=1, Contrast Table=2, TFT/ULUT=Wrkstn2a.w87 n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=11 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0 8100 Setup on CONFIGURATION Menu: n on SIB board (i.e., external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=60, P1,…,P6=0
n on IMAGE QLTY-> Mag Scaling=Off, Pixel Correct=Off, 952 Override=Off n on IMAGE QUALITY-> TFT FILES: TFT=ver693c0.w87 n on LOCAL PANEL: Contrast=6, Density=3.00 n on SYSTEM Menu: Acquire=Digital, Max.Img.Columns=4361 n on DIGITAL Menu: Pixel Depth=12, Header/Line, Parity=Even
Setup for Kodak DirectView DR 5000 / DR 9000 with LASER IMAGER Products
Author: [email protected], Edition: May ´05 8
Kodak DirectView DR 5000 / DR 9000 via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /
Kodak DryView 8300 LASER IMAGER
Kodak DirectView-DR 5000-DR 9000
Kodak DryView 8300Kodak 9410 PACS Link
DICOM Network
Control 9 pin
Data 37 pin
COPCIL board Copper Cable
Requirements: Kodak DR 5000 / DR 9000 v1.4 Requirements: 9410 v1.6, 8300 v4.9.1, 8300 LUT v3.0.3B Note: The 9410/8300 configuration can not print the Annotation Box (eg Patient Name), in this case the MIM200/8300 solve the problem ie print the Annotation Box Note: The 9410/8300 configuration can not print some formats (eg 2:1 side by side, etc), in this case the MIM200/8300 solve the problem ie print formats 2:1 side by side, etc DR 5000 / DR 9000 Setup: n Log as Service and under Service Tools n Go into menu DROC/Software Configuration/Add Software Resources n Browse Directory ./installable/vdevices n Browse Directory ./installable/vdevices/output n Browse Directory ./installable/vdevices/output/laser_cameras n Install Client side interface for Imation DryView camera connected via Dicom Print n Select Return to updated Software Configuration Page n Browse Directory ./installable/vdevices n Browse Directory ./installable/vdevices/output n Browse Directory ./installable/vdevices/output/laser_cameras n Edit Client side interface for Imation DryView camera connected via Dicom Print n Edit configuration file /linx_mp/resources/installed/raw/vdevdryview_002/dryview.cfg n factory object name=supplied by system, spooler name=DicomPrintSpooler, n priority=normal, max retries=20, device type=DV8300 or alias name, n device name (i.e., Aetitle)=9410, n device address (i.e., IPaddr : Port)=e.g., 150.224.150.22:1024 n request annotation SOP class=true, request print job SOP class=false, n print job poll period=15, print job timeout=300, printer poll period=15, n association timeout=0, collate=false, custom lut file= n CFG://HOLX0040/linx_mp/resources/installed/raw/customluts_001/linear.lut n Photometric interpr.=MONOCHROME2, copies=1, medium type=BLUE FILM, n Film destination=PROCESSOR, Film Session Label=any text,memory allocation=0
Setup for Kodak DirectView DR 5000 / DR 9000 with LASER IMAGER Products
Author: [email protected], Edition: May ´05 9
n Print priority=MED, available image display formats= n PORTRAIT\1,1 PORTRAIT\1,2 PORTRAIT\2,1 PORTRAIT\2,2 n Image display format=PORTRAIT\1,1, annotation display format id=0 n Number of annotation boxes=1, annotation boxes per text line=1 n Max annotation box text string size=64, max text line size=64, film size id=8INX10IN n Film magnification type=CUBIC, film smoothing type=0, border density=BLACK n Empty image density=BLACK, full pixel range=true, min density=20, n max density=300, trim=NO, Configuration info=LUT=wrkstn83a.w8u,1 n polarity=NORMAL, available image mag.types=REPLICATE BILINEAR CUBIC n image mag.type=CUBIC, image smoothing type=0, true size=true, pixel size=139 n true size width crop=0, true size length crop=0, pad=true, auto rotate=false, n apply ruler=false, annotation position=0, n text string=<PatientName+ID+Date+Institution> n Update n Log as Application n Edit/Setup/select an already existing entry/Copy/rename it e.g., DV8300 n into SETUP menu select the just created DV8300 n Edit/laser_cameras/select last entry e.g., vdevdryview _004/Add/Accept 9410 Setup: n on Device Setup, LOCAL PRINTERS:
n Printer=8300, Model=8300 Copper, Output=Copper n Command Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Pixel=8, Header/Line, Timeout=60, Transfer Rate=1 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=0, Max.Density=300, Contrast=6, Border Density=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT= upmsv3k.w8u
n on Device Setup, SCP PRINTERS, Current Providers: n Printer=8300, AE Title=9410, Port=1024, Max Associations=5 n on Device Setup, SCP PRINTERS, Registered Users:
n SCU AETitle=accordingly, SCU IPAddr=accordingly n SCP=8300, Copies=1, Contrast Table=1, TFT/ULUT=wrkstn83a.w8u n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=0 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0
8300 Setup: n on Operator Menu set: D=16, C=6, Sharp/Smooth=0 i.e., Auto n on Operator Menu set: Film Layout: 1 on 1=Portrait n on Service Menu set: Ratio=1.00, Serial=1200,8,1,Even,Comma,3M, Memory=16 n on Service Menu set: Digital Interface: Parity=Even, Modality Group=1
Setup for Kodak DirectView DR 5000 / DR 9000 with LASER IMAGER Products
Author: [email protected], Edition: May ´05 10
Kodak DirectView DR 5000 / DR 9000 via DICOM with Kodak Digital Science 190 MEDICAL LASER PRINTER
Kodak DirectView-DR 5000-DR 9000
DICOM Network
Kodak 190 camera
Requirements: Kodak DR 5000 / DR 9000 v1.4 Requirements: 190 rel. 1.7.29 DR 5000 / DR 9000 Setup: n Log as Service and under Service Tools n Go into menu DROC/Software Configuration/Add Software Resources n Browse Directory ./installable/vdevices n Browse Directory ./installable/vdevices/output n Browse Directory ./installable/vdevices/output/laser_cameras n Install Client side interface for Kodak 2180 camera connected via Dicom Print n Select Return to updated Software Configuration Page n Browse Directory ./installable/vdevices n Browse Directory ./installable/vdevices/output n Browse Directory ./installable/vdevices/output/laser_cameras n Edit Client side interface for Kodak 2180 camera connected via Dicom Print n Edit configuration file /linx_mp/resources/installed/raw/vdevdryview_002/dryview.cfg n factory object name=supplied by system, spooler name=DicomPrintSpooler, n priority=normal, max retries=20, device type=K190 or alias name, n device name (i.e., Aetitle)=190, n device address (i.e., IPaddr : Port)=e.g., 150.224.150.22:5040 n request annotation SOP class=true, request print job SOP class=false, n print job poll period=15, print job timeout=300, printer poll period=15, n association timeout=0, collate=false, custom lut file= n CFG://HOLX0040/linx_mp/resources/installed/raw/customluts_001/linear.lut n Photometric interpr.=MONOCHROME2, copies=1, medium type=BLUE FILM, n Film destination=PROCESSOR, Film Session Label=any text,memory allocation=0 n Print priority=MED, available image display formats= n PORTRAIT\1,1 PORTRAIT\1,2 PORTRAIT\2,1 PORTRAIT\2,2 n Image display format=PORTRAIT\1,1, annotation display format id=1 n Number of annotation boxes=1, annotation boxes per text line=1 n Max annotation box text string size=64, max text line size=64, film size id=14INX17IN n Film magnif.type=CUBIC, film smoothing type=NORMAL, border density=BLACK n Empty image density=BLACK, full pixel range=true, min density=20, n max density=300, trim=NO, Configuration info=CS0\CN0
Setup for Kodak DirectView DR 5000 / DR 9000 with LASER IMAGER Products
Author: [email protected], Edition: May ´05 11
n polarity=NORMAL, available image mag.types=REPLICATE BILINEAR CUBIC n image magnification type=CUBIC, image smoothing type=NORMAL n true size=false, pixel size=139 n true size width crop=0, true size length crop=0, pad=true, auto rotate=false, n apply ruler=true, annotation position=0, n text string=<PatientName+ID+Date+Institution> n Update n Log as Application n Edit/Setup/select an already existing entry/Copy/rename it e.g., K190 n into SETUP menu select the just created K190 n Edit/laser_cameras/select last entry e.g., vdevdryview _004/Add/Accept 190 Setup: n On 190 Control Panel press Menu, Setup: n Printer Density=3.00, Curve Shape=0.0, Contrast=0, Contrast Pivot Density=1.2 n IPAddress=accordingly, Subnet Mask=accordingly, Gateway Address=accordingly n Port=5040, Network Node Name=Kodak MLP190, Connection Type=RJ45
Setup for Kodak DirectView DR 5000 / DR 9000 with LASER IMAGER Products
Author: [email protected], Edition: May ´05 12
Kodak DirectView DR 5000 / DR 9000 via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /
Kodak Ektascan 2180 LASER PRINTER
Kodak DirectView-DR 5000-DR 9000
Kodak MIM 200
DICOM Network
Fiber Cable
Kodak 2180 camera
Requirements: Kodak DR 5000 / DR 9000 v1.4 Requirements: MIM200 v6.1, 2180 v2.17H DR 5000 / DR 9000 Setup: n Log as Service and under Service Tools n Go into menu DROC/Software Configuration/Add Software Resources n Browse Directory ./installable/vdevices n Browse Directory ./installable/vdevices/output n Browse Directory ./installable/vdevices/output/laser_cameras n Install Client side interface for Kodak 2180 camera connected via Dicom Print n Select Return to updated Software Configuration Page n Browse Directory ./installable/vdevices n Browse Directory ./installable/vdevices/output n Browse Directory ./installable/vdevices/output/laser_cameras n Edit Client side interface for Kodak 2180 camera connected via Dicom Print n Edit configuration file /linx_mp/resources/installed/raw/vdevdryview_002/dryview.cfg n factory object name=supplied by system, spooler name=DicomPrintSpooler, n priority=normal, max retries=20, device type=K2180 or alias name, n device name (i.e., Aetitle)=2180, n device address (i.e., IPaddr : Port)=e.g., 150.224.150.22:5040 n request annotation SOP class=true, request print job SOP class=false, n print job poll period=15, print job timeout=300, printer poll period=15, n association timeout=0, collate=false, custom lut file= n CFG://HOLX0040/linx_mp/resources/installed/raw/customluts_001/linear.lut n Photometric interpr.=MONOCHROME2, copies=1, medium type=BLUE FILM, n Film destination=PROCESSOR, Film Session Label=any text,memory allocation=0 n Print priority=MED, available image display formats= n PORTRAIT\1,1 PORTRAIT\1,2 PORTRAIT\2,1 PORTRAIT\2,2 n Image display format=PORTRAIT\1,1, annotation display format id=1 n Number of annotation boxes=1, annotation boxes per text line=1 n Max annotation box text string size=64, max text line size=64, film size id=14INX17IN n Film magnif.type=CUBIC, film smoothing type=NORMAL, border density=BLACK
Setup for Kodak DirectView DR 5000 / DR 9000 with LASER IMAGER Products
Author: [email protected], Edition: May ´05 13
n Empty image density=BLACK, full pixel range=true, min density=20, n max density=300, trim=NO, Configuration info=CS0\CN0 n polarity=NORMAL, available image mag.types=REPLICATE BILINEAR CUBIC n image magnification type=CUBIC, image smoothing type=NORMAL n true size=false, pixel size=139 n true size width crop=0, true size length crop=0, pad=true, auto rotate=false, n apply ruler=true, annotation position=0, n text string=<PatientName+ID+Date+Institution> n Update n Log as Application n Edit/Setup/select an already existing entry/Copy/rename it e.g., K2180 n into SETUP menu select the just created K2180 n Edit/laser_cameras/select last entry e.g., vdevdryview _004/Add/Accept MIM200 Setup: n on Configure, Network: n Computer Name=e.g., Kodak2180, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, KELP 2180, Set:
n General: Log.Name=KELP2180, Database Name=KELP 2180 n General: Model=KELP 2180, Memory=24, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4136x5160, 5030, (Blue) n Media Info:Media=35x35cm,4136x4136,4006, (Blue) n Media Info: Media=11x14in, 3240x4136, 4006, (Blue) n Media Info: Media=8x10in, 2290x2840, 2710, (Blue) n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=2 n Formatting: Pixel Pitch=12.6582 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7
Setup for Kodak DirectView DR 5000 / DR 9000 with LASER IMAGER Products
Author: [email protected], Edition: May ´05 14
n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape=0 (Always=N), Contrast (wet)=0 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Minify/Scale=On, Crop=Off, Text Box Relocation=None n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Interpolation=Cubic, n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Film Output Dest=Bin 9 (Always=N) n Negotiate Color Print=Off
2180 Setup: n Optical Interface board will automatic configure into 2180, no setup needed
Setup for Kodak DirectView DR 5000 / DR 9000 with LASER IMAGER Products
Author: [email protected], Edition: May ´05 15
Kodak DirectView DR 5000 / DR 9000 via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /
Kodak Ektascan 1120 LASER PRINTER
Kodak DirectView-DR 5000-DR 9000
Kodak MIM 200
DICOM Network
Fiber Cable
Kodak 1120 camera
Requirements: Kodak DR 5000 / DR 9000 v1.4 Requirements: MIM200 v6.1, 1120 v2.40/032 DR 5000 / DR 9000 Setup: n Log as Service and under Service Tools n Go into menu DROC/Software Configuration/Add Software Resources n Browse Directory ./installable/vdevices n Browse Directory ./installable/vdevices/output n Browse Directory ./installable/vdevices/output/laser_cameras n Install Client side interface for Kodak 2180 camera connected via Dicom Print n Select Return to updated Software Configuration Page n Browse Directory ./installable/vdevices n Browse Directory ./installable/vdevices/output n Browse Directory ./installable/vdevices/output/laser_cameras n Edit Client side interface for Kodak 2180 camera connected via Dicom Print n Edit configuration file /linx_mp/resources/installed/raw/vdevdryview_002/dryview.cfg n factory object name=supplied by system, spooler name=DicomPrintSpooler, n priority=normal, max retries=20, device type=K1120 or alias name, n device name (i.e., Aetitle)=1120, n device address (i.e., IPaddr : Port)=e.g., 150.224.150.22:5040 n request annotation SOP class=true, request print job SOP class=false, n print job poll period=15, print job timeout=300, printer poll period=15, n association timeout=0, collate=false, custom lut file= n CFG://HOLX0040/linx_mp/resources/installed/raw/customluts_001/linear.lut n Photometric interpr.=MONOCHROME2, copies=1, medium type=BLUE FILM, n Film destination=PROCESSOR, Film Session Label=any text,memory allocation=0 n Print priority=MED, available image display formats= n PORTRAIT\1,1 PORTRAIT\1,2 PORTRAIT\2,1 PORTRAIT\2,2 n Image display format=PORTRAIT\1,1, annotation display format id=1 n Number of annotation boxes=1, annotation boxes per text line=1 n Max annotation box text string size=64, max text line size=64, film size id=14INX17IN
Setup for Kodak DirectView DR 5000 / DR 9000 with LASER IMAGER Products
Author: [email protected], Edition: May ´05 16
n Film magnif.type=CUBIC, film smoothing type=NORMAL, border density=BLACK n Empty image density=BLACK, full pixel range=true, min density=20, n max density=300, trim=NO, Configuration info=CS0\CN0 n polarity=NORMAL, available image mag.types=REPLICATE BILINEAR CUBIC n image magnification type=CUBIC, image smoothing type=NORMAL n true size=false, pixel size=139 n true size width crop=0, true size length crop=0, pad=true, auto rotate=false, n apply ruler=true, annotation position=0, n text string=<PatientName+ID+Date+Institution> n Update n Log as Application n Edit/Setup/select an already existing entry/Copy/rename it e.g., K1120 n into SETUP menu select the just created K1120 n Edit/laser_cameras/select last entry e.g., vdevdryview _004/Add/Accept MIM200 Setup: n on Configure, Network: n Computer Name=e.g., Kodak1120, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, KELP 1120, Set:
n General: Log.Name=KELP1120, Database Name=KELP 1120 n General: Model=KELP 1120, Memory=20, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4096x5132, 5034, (Blue) n Media Info: Media=35x35cm, 4096x4108, 4010, (Blue) n Media Info: Media=11x14in, 4096x3232, 3134, (Blue) n Media Info: Media=8x10in, 2304x2900, 2802, (Blue) n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=3, Min Vert Sep=0 n Formatting: Trim Width Enabled=0, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.5 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=2.8 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7
Setup for Kodak DirectView DR 5000 / DR 9000 with LASER IMAGER Products
Author: [email protected], Edition: May ´05 17
n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape=0 (Always=N), Contrast (wet)=0 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Interpolation=Cubic, n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off
1120 Setup: n Optical Interface board will automatic configure into 1120, no setup needed
Setup for Kodak DirectView DR 5000 / DR 9000 with LASER IMAGER Products
Author: [email protected], Edition: May ´05 18
Kodak DirectView DR 5000 / DR 9000 via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /
Kodak Ektascan 160 LASER IMAGER
Kodak DirectView-DR 5000-DR 9000
Kodak MIM 200
DICOM Network
CrossedNetwork Cable
Kodak 160 camera
Requirements: Kodak DR 5000 / DR 9000 v1.4 Requirements: MIM 200 v6.1, KELI 160 v7.2 DR 5000 / DR 9000 Setup: n Log as Service and under Service Tools n Go into menu DROC/Software Configuration/Add Software Resources n Browse Directory ./installable/vdevices n Browse Directory ./installable/vdevices/output n Browse Directory ./installable/vdevices/output/laser_cameras n Install Client side interface for Kodak 2180 camera connected via Dicom Print n Select Return to updated Software Configuration Page n Browse Directory ./installable/vdevices n Browse Directory ./installable/vdevices/output n Browse Directory ./installable/vdevices/output/laser_cameras n Edit Client side interface for Kodak 2180 camera connected via Dicom Print n Edit configuration file /linx_mp/resources/installed/raw/vdevdryview_002/dryview.cfg n factory object name=supplied by system, spooler name=DicomPrintSpooler, n priority=normal, max retries=20, device type=K160 or alias name, n device name (i.e., Aetitle)=160, n device address (i.e., IPaddr : Port)=e.g., 150.224.150.22:5040 n request annotation SOP class=true, request print job SOP class=false, n print job poll period=15, print job timeout=300, printer poll period=15, n association timeout=0, collate=false, custom lut file= n CFG://HOLX0040/linx_mp/resources/installed/raw/customluts_001/linear.lut n Photometric interpr.=MONOCHROME2, copies=1, medium type=BLUE FILM, n Film destination=PROCESSOR, Film Session Label=any text,memory allocation=0 n Print priority=MED, available image display formats= n PORTRAIT\1,1 PORTRAIT\1,2 PORTRAIT\2,1 PORTRAIT\2,2 n Image display format=PORTRAIT\1,1, annotation display format id=1 n Number of annotation boxes=1, annotation boxes per text line=1 n Max annotation box text string size=64, max text line size=64, film size id=14INX17IN
Setup for Kodak DirectView DR 5000 / DR 9000 with LASER IMAGER Products
Author: [email protected], Edition: May ´05 19
n Film magnif.type=CUBIC, film smoothing type=NORMAL, border density=BLACK n Empty image density=BLACK, full pixel range=true, min density=20, n max density=300, trim=NO, Configuration info=CS0\CN0 n polarity=NORMAL, available image mag.types=REPLICATE BILINEAR CUBIC n image magnification type=CUBIC, image smoothing type=NORMAL n true size=false, pixel size=139 n true size width crop=0, true size length crop=0, pad=true, auto rotate=false, n apply ruler=true, annotation position=0, n text string=<PatientName+ID+Date+Institution> n Update n Log as Application n Edit/Setup/select an already existing entry/Copy/rename it e.g., K160 n into SETUP menu select the just created K160 n Edit/laser_cameras/select last entry e.g., vdevdryview _004/Add/Accept MIM200 Setup: n on Configure, Network: n Computer Name=e.g., Kodak160, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, KELI 160, Set:
n General: Log.Name=KELI 160, IPAddr=100.100.100.30, n General: Database Name=KELI 160, Model=KELI 160 n Media Info: Media=35x43cm, 4361x5348, 5228, Any (Blue,Clear) n Supported Item: Collation=On, Text=On, Tonescaling on Image=On n Supported Item: Pivot Density=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7
Setup for Kodak DirectView DR 5000 / DR 9000 with LASER IMAGER Products
Author: [email protected], Edition: May ´05 20
n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape=0 (Always=N), Contrast (wet)=0 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Interpolation=Cubic, n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off
160 Setup: no modality-specific setup needed
Setup for Kodak DirectView DR 5000 / DR 9000 with LASER IMAGER Products
Author: [email protected], Edition: May ´05 21
Kodak DirectView DR 5000 / DR 9000 via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /
Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual and HQ)
Kodak DirectView-DR 5000-DR 9000
Kodak DryView 8700 Plus
DICOM Network
3M8700 DryView
Fiber Cable
Fiber Cable
Kodak MIM 200
Requirements: Kodak DR 5000 / DR 9000 v1.4 Requirements: MIM200 v6.1, 8700 v1.34 Note: This setup is basically also valid for 25 PS computer Note: This setup is basically also valid for 8800/8700 Dual and HQ cameras
by basically using the correspondent Model into MIM200 Destination DR 5000 / DR 9000 Setup: n Log as Service and under Service Tools n Go into menu DROC/Software Configuration/Add Software Resources n Browse Directory ./installable/vdevices n Browse Directory ./installable/vdevices/output n Browse Directory ./installable/vdevices/output/laser_cameras n Install Client side interface for Imation DryView camera connected via Dicom Print n Select Return to updated Software Configuration Page n Browse Directory ./installable/vdevices n Browse Directory ./installable/vdevices/output n Browse Directory ./installable/vdevices/output/laser_cameras n Edit Client side interface for Imation DryView camera connected via Dicom Print n Edit configuration file /linx_mp/resources/installed/raw/vdevdryview_002/dryview.cfg n factory object name=supplied by system, spooler name=DicomPrintSpooler, n priority=normal, max retries=20, device type=DV8700 or alias name, n device name (i.e., Aetitle)=8700, n device address (i.e., IPaddr : Port)=e.g., 150.224.150.22:5040 n request annotation SOP class=true, request print job SOP class=false, n print job poll period=15, print job timeout=300, printer poll period=15, n association timeout=0, collate=false, custom lut file= n CFG://HOLX0040/linx_mp/resources/installed/raw/customluts_001/linear.lut n Photometric interpr.=MONOCHROME2, copies=1, medium type=BLUE FILM, n Film destination=PROCESSOR, Film Session Label=any text,memory allocation=0
Setup for Kodak DirectView DR 5000 / DR 9000 with LASER IMAGER Products
Author: [email protected], Edition: May ´05 22
n Print priority=MED, available image display formats= n PORTRAIT\1,1 PORTRAIT\1,2 PORTRAIT\2,1 PORTRAIT\2,2 n Image display format=PORTRAIT\1,1, annotation display format id=0 n Number of annotation boxes=1, annotation boxes per text line=1 n Max annotation box text string size=64, max text line size=64, film size id=14INX17IN n Film magnification type=CUBIC, film smoothing type=11, border density=BLACK n Empty image density=BLACK, full pixel range=true, min density=20, n max density=300, trim=NO, Configuration info=LUT=wrkstn2a.w87,2 n polarity=NORMAL, available image mag.types=REPLICATE BILINEAR CUBIC n image mag.type=CUBIC, image smoothing type=11, true size=true, pixel size=139 n true size width crop=0, true size length crop=0, pad=true, auto rotate=false, n apply ruler=false, annotation position=0, n text string=<PatientName+ID+Date+Institution> n Update n Log as Application n Edit/Setup/select an already existing entry/Copy/rename it e.g., DV8700 n into SETUP menu select the just created DV8700 n Edit/laser_cameras/select last entry e.g., vdevdryview _004/Add/Accept MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8700, Set:
n General: Log.Name=8700 n General: Database Name=8700, Model=8700, Memory=32 n Media Info: Media=35x43cm, 4096x5223, 5133, Blue n Output Params: Cmd=SuperSet,Baud=19200,Data=8,Stop=1,Parity=None n Output Params: Pixel=12, Header/Line, Transfer=2000 KHz, Acq=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7
Setup for Kodak DirectView DR 5000 / DR 9000 with LASER IMAGER Products
Author: [email protected], Edition: May ´05 23
n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=Wrkstn2a.w87 (Always=Y), Contrast (dry)=2 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=11 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off
8700 Plus Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=12, Header/Line, Parity=Disable Even, Port=0, Timeout=60
Setup for Kodak DirectView DR 5000 / DR 9000 with LASER IMAGER Products
Author: [email protected], Edition: May ´05 24
Kodak DirectView DR 5000 / DR 9000 via DICOM with| Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /
Kodak DryView 8500 LASER IMAGER / Plus (see also 8800/8500 Dual)
Kodak DirectView-DR 5000-DR 9000
Kodak DryView 8500 Plus
DICOM Network
3M8700 DryView
Fiber Cable
Fiber Cable
Kodak MIM 200
Requirements: Kodak DR 5000 / DR 9000 v1.4 Requirements: MIM200 v6.1, 8500 v1.34 Note: This setup is basically also valid for 25 PS computer Note: This setup is basically also valid for 8800/8500 Dual camera
by basically using the correspondent Model into MIM200 Destination DR 5000 / DR 9000 Setup: n Log as Service and under Service Tools n Go into menu DROC/Software Configuration/Add Software Resources n Browse Directory ./installable/vdevices n Browse Directory ./installable/vdevices/output n Browse Directory ./installable/vdevices/output/laser_cameras n Install Client side interface for Imation DryView camera connected via Dicom Print n Select Return to updated Software Configuration Page n Browse Directory ./installable/vdevices n Browse Directory ./installable/vdevices/output n Browse Directory ./installable/vdevices/output/laser_cameras n Edit Client side interface for Imation DryView camera connected via Dicom Print n Edit configuration file /linx_mp/resources/installed/raw/vdevdryview_002/dryview.cfg n factory object name=supplied by system, spooler name=DicomPrintSpooler, n priority=normal, max retries=20, device type=DV8500 or alias name, n device name (i.e., Aetitle)=8500, n device address (i.e., IPaddr : Port)=e.g., 150.224.150.22:5040 n request annotation SOP class=true, request print job SOP class=false, n print job poll period=15, print job timeout=300, printer poll period=15, n association timeout=0, collate=false, custom lut file= n CFG://HOLX0040/linx_mp/resources/installed/raw/customluts_001/linear.lut n Photometric interpr.=MONOCHROME2, copi.e.,s=1, medium type=BLUE FILM, n Film destination=PROCESSOR, Film Session Label=any text,memory allocation=0
Setup for Kodak DirectView DR 5000 / DR 9000 with LASER IMAGER Products
Author: [email protected], Edition: May ´05 25
n Print priority=MED, available image display formats= n PORTRAIT\1,1 PORTRAIT\1,2 PORTRAIT\2,1 PORTRAIT\2,2 n Image display format=PORTRAIT\1,1, annotation display format id=0 n Number of annotation boxes=1, annotation boxes per text line=1 n Max annotation box text string size=64, max text line size=64, film size id=11INX14IN n Film magnification type=CUBIC, film smoothing type=11, border density=BLACK n Empty image density=BLACK, full pixel range=true, min density=20, n max density=300, trim=NO, Configuration info=LUT=wrkstn2a.w87,2 n polarity=NORMAL, available image mag.types=REPLICATE BILINEAR CUBIC n image mag.type=CUBIC, image smoothing type=11, true size=true, pixel size=139 n true size width crop=0, true size length crop=0, pad=true, auto rotate=false, n apply ruler=false, annotation position=0, n text string=<PatientName+ID+Date+Institution> n Update n Log as Application n Edit/Setup/select an already existing entry/Copy/rename it eg DV8500 n into SETUP menu select the just created DV8500 n Edit/laser_cameras/select last entry eg vdevdryview _004/Add/Accept MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8500, Set:
n General: Log.Name=8500 n General: Database Name=8500, Model=8500, Memory=32 n Media Info: Media=11x14in, 3388x4283, 4193, Blue n Output Params: Cmd=SuperSet,Baud=19200,Data=8,Stop=1,Parity=None n Output Params: Pixel=12, Header/Line, Transfer=2000 KHz, Acq=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7
Setup for Kodak DirectView DR 5000 / DR 9000 with LASER IMAGER Products
Author: [email protected], Edition: May ´05 26
n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=Wrkstn2a.w87 (Always=Y), Contrast (dry)=2 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=11 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=11INx14IN (Always=N), Negotiate Color Print=Off
8500 Plus Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=12, Header/Line, Parity=Disable Even, Port=0, Timeout=60
Setup for Kodak DirectView DR 5000 / DR 9000 with LASER IMAGER Products
Author: [email protected], Edition: May ´05 27
Kodak DirectView DR 5000 / DR 9000 via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /
Kodak DryView 8100 LASER IMAGER
Requirements: Kodak DR 5000 / DR 9000 v1.4 Requirements: MIM200 v6.1, 8100 v2.4.1 Note: This setup is basically also valid for 25 PS computer DR 5000 / DR 9000 Setup: n Log as Service and under Service Tools n Go into menu DROC/Software Configuration/Add Software Resources n Browse Directory ./installable/vdevices n Browse Directory ./installable/vdevices/output n Browse Directory ./installable/vdevices/output/laser_cameras n Install Client side interface for Imation DryView camera connected via Dicom Print n Select Return to updated Software Configuration Page n Browse Directory ./installable/vdevices n Browse Directory ./installable/vdevices/output n Browse Directory ./installable/vdevices/output/laser_cameras n Edit Client side interface for Imation DryView camera connected via Dicom Print n Edit configuration file /linx_mp/resources/installed/raw/vdevdryview_002/dryview.cfg n factory object name=supplied by system, spooler name=DicomPrintSpooler, n priority=normal, max retries=20, device type=DV8100 or alias name, n device name (i.e., Aetitle)=8100, n device address (i.e., IPaddr : Port)=eg 150.224.150.22:5040 n request annotation SOP class=true, request print job SOP class=false, n print job poll period=15, print job timeout=300, printer poll period=15, n association timeout=0, collate=false, custom lut file= n CFG://HOLX0040/linx_mp/resources/installed/raw/customluts_001/linear.lut n Photometric interpr.=MONOCHROME2, copies=1, medium type=BLUE FILM, n Film destination=PROCESSOR, Film Session Label=any text,memory allocation=0 n Print priority=MED, available image display formats= n PORTRAIT\1,1 PORTRAIT\1,2 PORTRAIT\2,1 PORTRAIT\2,2
Kodak DirectView-DR 5000-DR 9000
Kodak DryView 8100
DICOM Network
COPCIL BoardCopper Cable Control 9-pin
Data 37-pin
RS4229-pole Plug
Kodak MIM 200
Setup for Kodak DirectView DR 5000 / DR 9000 with LASER IMAGER Products
Author: [email protected], Edition: May ´05 28
n Image display format=PORTRAIT\1,1, annotation display format id=0 n Number of annotation boxes=1, annotation boxes per text line=1 n Max annotation box text string size=64, max text line size=64, film size id=14INX17IN n Film magnification type=CUBIC, film smoothing type=11, border density=BLACK n Empty image density=BLACK, full pixel range=true, min density=20, n max density=300, trim=NO, Configuration info=LUT=wrkstn2a.w87,2 n polarity=NORMAL, available image mag.types=REPLICATE BILINEAR CUBIC n image mag.type=CUBIC, image smoothing type=11, true size=true, pixel size=139 n true size width crop=0, true size length crop=0, pad=true, auto rotate=false, n apply ruler=false, annotation position=0, n text string=<PatientName+ID+Date+Institution> n Update n Log as Application n Edit/Setup/select an already existing entry/Copy/rename it eg DV8100 n into SETUP menu select the just created DV8100 n Edit/laser_cameras/select last entry eg vdevdryview _004/Add/Accept MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8100, Set:
n General: Log.Name=8100 n General: Database Name=8100, Model=8100, Memory=32 n Media Info: Media=35x43cm, 4096x5223, 5133, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=12, Header/Line, Transfer=1000 KHz, Acquire=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7
Setup for Kodak DirectView DR 5000 / DR 9000 with LASER IMAGER Products
Author: [email protected], Edition: May ´05 29
n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=Wrkstn2a.w87 (Always=Y), Contrast (dry)=2 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=11 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off
8100 Setup on CONFIGURATION Menu: n on SIB board (i.e., external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=90, P1,…,P6=0
n on IMAGE QLTY-> Mag Scaling=Off, Pixel Correct=Off, 952 Override=Off n on IMAGE QUALITY-> TFT FILES Menu: TFT=Ver693c0.w87 n on LOCAL PANEL Menu: Contrast=6, Density=3.00 n on SYSTEM Menu: Acquire=Digital, Max.Img.Columns=4361 n on DIGITAL Menu: Pixel Depth=12, Header/Line, Parity=Even
Setup for Kodak DirectView DR 5000 / DR 9000 with LASER IMAGER Products
Author: [email protected], Edition: May ´05 30
Kodak DirectView DR 5000 / DR 9000 via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /
Kodak DryView 8300 LASER IMAGER
Kodak DirectView-DR 5000-DR 9000
Kodak DryView 8300
DICOM Network
Control 9 pin
Data 37 pin
COPCIL board Copper Cable
Kodak MIM 200
Requirements: Kodak DR 5000 / DR 9000 v1.4 Requirements: MIM200 v6.1, 8300 v4.9.1, 8300 LUT v3.0.3B Note: This setup is basically also valid for 25 PS computer DR 5000 / DR 9000 Setup: n Log as Service and under Service Tools n Go into menu DROC/Software Configuration/Add Software Resources n Browse Directory ./installable/vdevices n Browse Directory ./installable/vdevices/output n Browse Directory ./installable/vdevices/output/laser_cameras n Install Client side interface for Imation DryView camera connected via Dicom Print n Select Return to updated Software Configuration Page n Browse Directory ./installable/vdevices n Browse Directory ./installable/vdevices/output n Browse Directory ./installable/vdevices/output/laser_cameras n Edit Client side interface for Imation DryView camera connected via Dicom Print n Edit configuration file /linx_mp/resources/installed/raw/vdevdryview_002/dryview.cfg n factory object name=supplied by system, spooler name=DicomPrintSpooler, n priority=normal, max retries=20, device type=DV8300 or alias name, n device name (i.e., Aetitle)=8300, n device address (i.e., IPaddr : Port)=eg 150.224.150.22:5040 n request annotation SOP class=true, request print job SOP class=false, n print job poll period=15, print job timeout=300, printer poll period=15, n association timeout=0, collate=false, custom lut file= n CFG://HOLX0040/linx_mp/resources/installed/raw/customluts_001/linear.lut n Photometric interpr.=MONOCHROME2, copies=1, medium type=BLUE FILM, n Film destination=PROCESSOR, Film Session Label=any text,memory allocation=0 n Print priority=MED, available image display formats= n PORTRAIT\1,1 PORTRAIT\1,2 PORTRAIT\2,1 PORTRAIT\2,2 n Image display format=PORTRAIT\1,1, annotation display format id=0
Setup for Kodak DirectView DR 5000 / DR 9000 with LASER IMAGER Products
Author: [email protected], Edition: May ´05 31
n Number of annotation boxes=1, annotation boxes per text line=1 n Max annotation box text string size=64, max text line size=64, film size id=8INX10IN n Film magnification type=CUBIC, film smoothing type=2, border density=BLACK n Empty image density=BLACK, full pixel range=true, min density=20, n max density=300, trim=NO, Configuration info=LUT=wrkstn83a.w8u,1 n polarity=NORMAL, available image mag.types=REPLICATE BILINEAR CUBIC n image mag.type=CUBIC, image smoothing type=0, true size=true, pixel size=139 n true size width crop=0, true size length crop=0, pad=true, auto rotate=false, n apply ruler=false, annotation position=0, n text string=<PatientName+ID+Date+Institution> n Update n Log as Application n Edit/Setup/select an already existing entry/Copy/rename it eg DV8300 n into SETUP menu select the just created DV8300 n Edit/laser_cameras/select last entry eg vdevdryview _004/Add/Accept MIM200 Setup: n on Configure, Network:
n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, 8300, Set: n General: Log.Name=8300 n General: Database Name=8300, Model=8300, Memory=32 n Media Info: Media=8x10in, 2256x2676, 2596, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=8, Header/Line, Transfer=2000 KHz, Acquire=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On, SuperSlide=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=11.811 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3 n M952 Usage: Min H/V Mag=1, Max H/V Mag=16, Min Dmax 952=1.5
Setup for Kodak DirectView DR 5000 / DR 9000 with LASER IMAGER Products
Author: [email protected], Edition: May ´05 32
n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=wkstn83a.w8u (Always=Y), Contrast (dry)=1 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=2 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=8INx10IN (Always=N), Negotiate Color Print=Off
8300 Setup: n on Operator Menu set: D=16, C=6, Sharp/Smooth=0 i.e., Auto n on Operator Menu set: Film Layout: 1 on 1=Portrait n on Service Menu set: Ratio=1.00, Serial=1200,8,1,Even,Comma,3M, Memory=16 n on Service Menu set: Digital Interface: Parity=Even, Modality Group=1
Setup for Kodak DirectView DR 5000 / DR 9000 with LASER IMAGER Products
Author: [email protected], Edition: May ´05 33
Kodak DirectView DR 5000 / DR 9000 via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /
Kodak DryView 8200 LASER IMAGER
Kodak DirectView-DR 5000-DR 9000
Kodak MIM 200
DICOM Network
CrossedNetwork Cable
Kodak DryView 8200
Requirements: Kodak DR 5000 / DR 9000 v1.4 Requirements: MIM200 v6.1, 8200 v3.5 Note: This setup is basically also valid for 25 PS computer DR 5000 / DR 9000 Setup: n Log as Service and under Service Tools n Go into menu DROC/Software Configuration/Add Software Resources n Browse Directory ./installable/vdevices n Browse Directory ./installable/vdevices/output n Browse Directory ./installable/vdevices/output/laser_cameras n Install Client side interface for DryView or Drystar camera connected via Dicom Print n Select Return to updated Software Configuration Page n Browse Directory ./installable/vdevices n Browse Directory ./installable/vdevices/output n Browse Directory ./installable/vdevices/output/laser_cameras n Edit Client side interface for DryView or Drystar camera connected via Dicom Print n Edit configuration file /linx_mp/resources/installed/raw/vdevdryview_002/dryview.cfg n factory object name=supplied by system, spooler name=DicomPrintSpooler, n priority=normal, max retries=20, device type=DV8200, n device name (i.e., Aetitle)=8200, n device address (i.e., IPaddr : Port)=eg 150.224.150.22:5040 n request annotation SOP class=true, request print job SOP class=false, n print job poll period=15, print job timeout=300, printer poll period=15, n association timeout=0, collate=false, custom lut file= n CFG://HOLX0040/linx_mp/resources/installed/raw/customluts_001/linear.lut n Photometric interpr.=MONOCHROME2, copies=1, medium type=BLUE FILM, n Film destination=PROCESSOR, Film Session Label=any text,memory allocation=0 n Print priority=MED, available image display formats= n PORTRAIT\1,1 PORTRAIT\1,2 PORTRAIT\2,1 PORTRAIT\2,2 n Image display format=PORTRAIT\1,1, annotation display format id=6
Setup for Kodak DirectView DR 5000 / DR 9000 with LASER IMAGER Products
Author: [email protected], Edition: May ´05 34
n Number of annotation boxes=6, annotation boxes per text line=3 n Max annotation box text string size=63, max text line size=189, filmsize id=14INX17IN n Film magnification type=CUBIC, film smoothing type=11, border density=BLACK n Empty image density=BLACK, full pixel range=true, min density=20, n max density=300, trim=NO, Configuration info=LUT=wrkstn2a.w87,2 n polarity=NORMAL, available image mag.types=REPLICATE BILINEAR CUBIC n image mag.type=CUBIC, image smoothing type=11, true size=true, pixel size=139 n true size width crop=0, true size length crop=0, pad=true, auto rotate=false, n apply ruler=false, n annotation position=1, text string=<PatientName+ID+Date+Institution> n annotation position=2, text string=<ReferringDr+TechID> n annotation position=3, text string=<ProcedureDescription> n annotation position=4, text string=<DOB> n annotation position=5, text string=<AcquisitionDate+Time> n annotation position=6, text string=< StudyDescription > n Update n Log as Application n Edit/Setup/select an already existing entry/Copy/rename it eg DV8200 n into SETUP menu select the just created DV8200 n Edit/laser_cameras/select last entry eg vdevdryview _004/Add/Accept MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8200, Set:
n General: Log.Name=8200, IPAddr=100.100.100.40, n General: Database Name=8200, Model=8200, Memory=32 n Media Info: Media=35x43cm, 4361x5223, 5133, Any (Blue,Clear) n Media Info: Media=35x35cm, 4361x4247, 4157, Any (Blue,Clear) n Media Info: Media=11x14in, 3272x4361, 4271, Any (Blue,Clear) n Supported Item: Collation=On, Common Text=On, Tonescaling=On n Supported Item: Remote Image Deletion=On, Rotation=On n Interpolation: No Magnification=On, Bilin=On, Repl=On n Interpolation: Cubic Spline=On, Cubic Convolution 2=On n Format Types: Custom=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205
Setup for Kodak DirectView DR 5000 / DR 9000 with LASER IMAGER Products
Author: [email protected], Edition: May ´05 35
n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n SCU: Density Space=On, Variable Border=On, PLUT Service=On n SCU: Curve Shape Tonescaling=On, Perception LUT Tonescaling=On n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7
n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=Wrkstn2a.w87 (Always=Y), Contrast (dry)=2 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=11 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off
8200 Setup on CONFIGURATION Menu: n on IMAGE QUALITY-> TFT FILES Menu: TFT=Ver693c0.w87 n on LOCAL PANEL Menu: Contrast=6, Density=3.00 n on DICOM Menu: SCU Config.: AE=MIM, TFT=VER693C0, C=6, Smoothing=0 n on DICOM Menu: DICOM Config.: AE=NER_ANY, Port=1025
Setup for Kodak DirectView DR 5000 / DR 9000 with LASER IMAGER Products
Author: [email protected], Edition: May ´05 36
Kodak DirectView DR 5000 / DR 9000 via DICOM with Kodak DryView 8900 LASER IMAGER
Requirements: Kodak DR 5000 / DR 9000 v1.4 Requirements: 8900 rev.E ie rel.2.11 (ie DRE v2.11, MIM v5.6.b5, MCS v2.10) DR 5000 / DR 9000 Setup: n Log as Service and under Service Tools n Go into menu DROC/Software Configuration/Add Software Resources n Browse Directory ./installable/vdevices n Browse Directory ./installable/vdevices/output n Browse Directory ./installable/vdevices/output/laser_cameras n Install Client side interface for Imation DryView camera connected via Dicom Print n Select Return to updated Software Configuration Page n Browse Directory ./installable/vdevices n Browse Directory ./installable/vdevices/output n Browse Directory ./installable/vdevices/output/laser_cameras n Edit Client side interface for Imation DryView camera connected via Dicom Print n Edit configuration file /linx_mp/resources/installed/raw/vdevdryview_002/dryview.cfg n factory object name=supplied by system, spooler name=DicomPrintSpooler, n priority=normal, max retries=20, device type=DV8900 or alias name, n device name (ie Aetitle)=8900, n device address (ie IPaddr : Port)= eg 150.224.150.22:5040 n request annotation SOP class=true, request print job SOP class=false, n print job poll period=15, print job timeout=300, printer poll period=15, n association timeout=0, collate=false, custom lut file= n CFG://HOLX0040/linx_mp/resources/installed/raw/customluts_001/linear.lut n Photometric interpr.=MONOCHROME2, copies=1, medium type=BLUE FILM, n Film destination=PROCESSOR, Film Session Label=any text,memory allocation=0 n Print priority=MED, available image display formats= n PORTRAIT\1,1 PORTRAIT\1,2 PORTRAIT\2,1 PORTRAIT\2,2 n Image display format=PORTRAIT\1,1, annotation display format id=0 n Number of annotation boxes=1, annotation boxes per text line=1 n Max annotation box text string size=64, max text line size=64, film size id=14INX17IN n Film magnification type=CUBIC, film smoothing type=11, border density=BLACK n Empty image density=BLACK, full pixel range=true, min density=20, n max density=300, trim=NO, Configuration info= LUT=wrkstn2a.w87,2
Kodak DirectView-DR 5000-DR 9000
DICOM Network
Kodak DryView 8900
Setup for Kodak DirectView DR 5000 / DR 9000 with LASER IMAGER Products
Author: [email protected], Edition: May ´05 37
n polarity=NORMAL, available image mag.types=REPLICATE BILINEAR CUBIC n image mag.type=CUBIC, image smoothing type=11, true size=true, pixel size=139 n true size width crop=0, true size length crop=0, pad=true, auto rotate=false, n apply ruler=false, annotation position=0, n text string=<PatientName+ID+Date+Institution> (note: this string could create problem) n Update n Log as Application n Edit/Setup/select an already existing entry/Copy/rename it eg DV8900 n into SETUP menu select the just created DV8900 n Edit/laser_cameras/select last entry eg vdevdryview _004/Add/Accept 8900 Setup: n on Configuration, System, Network: n Host Name=DV8900, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configuration, DICOM SCP, Communications:
n Port=5040, Association Limit=12, Source Name=DICOM n on Configuration, Destination:
n General: Log.Name=8900 n Media Types: Media=35x43cm, 9100x11037, 10781, Any n Media Types: Media=35x35cm,9100x9087, 8831, Any n Media Types: Media=11x14in, 7137x9100, 8844, Any n Media Types: Media=10x12in, 6490x7767, 7511, Any n Media Types: Media=8x10in, 5167x6490, 6234, Any n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On n Formatting: DICOM Annotation Box=On, Req.Image Size=On n Formatting: Req.Size Scale=On, Req.Size Mix Page=On n Formatting: Req.Size Mix Row=On, Trim=On, n Formatting: True Landscape=On, Rotation=On n Formatting: Minify/Crop=On, Tonescaling on Image Basis=On n Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0 n Formatting: Max Img Rows=0, Pixel Pitch=25.5910, Min Horiz Sep=4 n Formatting: Min Vert Sep=4, Trim Width Enabled=4 n Formatting: Trim Width Disabled=0, Maximum DMAX=3.30
n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify: n Negotiate Presentation LUT=No, Negotiate Color Print=No n TFT= Wrkstn2a.w87 (Always=N), Contrast=2 (Always=N) n Smoothing Type=11 (Always=N), Image Polarity=Normal (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=No (Always=Y), Warnings=Yes n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n 2mm Border=Yes, Film Clip Border=No, Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Sorter Bin=Bin1 (Always=N) n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No n Modality ID=No, Annotation Override=No, Density Patch=No n Image Resizing=Minify/Scale (Always=N), n Text Box Location=None, Source ID=dr
Setup for Kodak DirectView DR 5000 / DR 9000 with LASER IMAGER Products
Author: [email protected], Edition: May ´05 38
Kodak DirectView DR 5000 / DR 9000 via DICOM with Kodak DryView 8150 LASER IMAGER
Requirements: Kodak DR 5000 / DR 9000 v1.4 Requirements: 8150 v0.08.b6 (DRE=DV8150_DRE_0.08.b6, MIM=MIM_v5.7.b6) DR 5000 / DR 9000 Setup: n Log as Service and under Service Tools n Go into menu DROC/Software Configuration/Add Software Resources n Browse Directory ./installable/vdevices n Browse Directory ./installable/vdevices/output n Browse Directory ./installable/vdevices/output/laser_cameras n Install Client side interface for Imation DryView camera connected via Dicom Print n Select Return to updated Software Configuration Page n Browse Directory ./installable/vdevices n Browse Directory ./installable/vdevices/output n Browse Directory ./installable/vdevices/output/laser_cameras n Edit Client side interface for Imation DryView camera connected via Dicom Print n Edit configuration file /linx_mp/resources/installed/raw/vdevdryview_002/dryview.cfg n factory object name=supplied by system, spooler name=DicomPrintSpooler, n priority=normal, max retries=20, device type=DV8150 or alias name, n device name (ie Aetitle)=DV8150, n device address (ie IPaddr : Port)= eg 150.224.150.22:5040 n request annotation SOP class=true, request print job SOP class=false, n print job poll period=15, print job timeout=300, printer poll period=15, n association timeout=0, collate=false, custom lut file= n CFG://HOLX0040/linx_mp/resources/installed/raw/customluts_001/linear.lut n Photometric interpr.=MONOCHROME2, copies=1, medium type=BLUE FILM, n Film destination=PROCESSOR, Film Session Label=any text,memory allocation=0 n Print priority=MED, available image display formats= n PORTRAIT\1,1 PORTRAIT\1,2 PORTRAIT\2,1 PORTRAIT\2,2 n Image display format=PORTRAIT\1,1, annotation display format id=0 n Number of annotation boxes=1, annotation boxes per text line=1 n Max annotation box text string size=64, max text line size=64, film size id=14INX17IN n Film magnification type=CUBIC, film smoothing type=11, border density=BLACK n Empty image density=BLACK, full pixel range=true, min density=20, n max density=300, trim=NO, Configuration info= LUT=wrkstn2a.w87,1 n polarity=NORMAL, available image mag.types=REPLICATE BILINEAR CUBIC
Kodak DirectView-DR 5000-DR 9000
DICOM Network
Kodak DryView 8150
Setup for Kodak DirectView DR 5000 / DR 9000 with LASER IMAGER Products
Author: [email protected], Edition: May ´05 39
n image mag.type=CUBIC, image smoothing type=11, true size=true, pixel size=139 n true size width crop=0, true size length crop=0, pad=true, auto rotate=false, n apply ruler=false, annotation position=0, n text string=<PatientName+ID+Date+Institution> n Update n Log as Application n Edit/Setup/select an already existing entry/Copy/rename it eg DV8150 n into SETUP menu select the just created DV8150 n Edit/laser_cameras/select last entry eg vdevdryview _004/Add/Accept 8150 Setup: n on Configuration, System, Network: n Host Name=DV8150DRE, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configuration, DICOM SCP, Communications:
n Port=5040, Association Limit=12, Source Name=DICOM n on Configuration, Destination:
n AE Title: Log.Name=DV8150 n Media Types: Media=35x43cm, 4438x5390, 5262, Any n Media Types: Media=35x35cm, 4438x4414,4286, Any n Media Types: Media=11x14in, 3440x4438, 4310, Any n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On n Formatting: DICOM Annotation Box=On, Req.Image Size=On n Formatting: Req.Size Scale=On, Req.Size Mix Page=On n Formatting: Req.Size Mix Row=On, Trim=On, n Formatting: True Landscape=On, Rotation=On n Formatting: Minify/Crop=On, Tonescaling on Image Basis=On n Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0 n Formatting: Max Img Rows=0, Pixel Pitch=12.8000, Min Horiz Sep=2 n Formatting: Min Vert Sep=2, Trim Width Enabled=2 n Formatting: Trim Width Disabled=0, Maximum DMAX=3.10
n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify: n Negotiate Presentation LUT=No, Negotiate Color Print=No, n TFT Set Name=Wrkstn2a.w87 (Always=Y) n Contrast=1 (Always=N), Smoothing Type=11 (Always=N) n Dmin=0.00 (Always=N), Dmax=3.00 (Always=N) n Image Polarity=Normal (Always=N) n NeventReports=No (Always=Y), Warnings=Yes n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n 2mm Border=Yes, Film Clip Border=No, n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N) n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No, n Modality ID=No, Annotation Override=No, Density Patch=No n Image Resizing=Minify/Scale (Always=N), n Text Box Location=None, Source ID=dr
Setup for Kodak DirectView DR 5000 / DR 9000 with LASER IMAGER Products
Author: [email protected], Edition: May ´05 40
Kodak DirectView DR 5000 / DR 9000 via DICOM with Kodak Color Medical Imager 1000
Requirements: Kodak DR 5000 / DR 9000 v1.4 Requirements: CMI-1000 v1.0.b8 (DRE=v1.0.b8, MIMCore=v2.0.b3) DR 5000 / DR 9000 Setup: n Log as Service and under Service Tools n Go into menu DROC/Software Configuration/Add Software Resources n Browse Directory ./installable/vdevices n Browse Directory ./installable/vdevices/output n Browse Directory ./installable/vdevices/output/laser_cameras n Install Client side interface for Imation DryView camera connected via Dicom Print n Select Return to updated Software Configuration Page n Browse Directory ./installable/vdevices n Browse Directory ./installable/vdevices/output n Browse Directory ./installable/vdevices/output/laser_cameras n Edit Client side interface for Imation DryView camera connected via Dicom Print n Edit configuration file /linx_mp/resources/installed/raw/vdevdryview_002/dryview.cfg n factory object name=supplied by system, spooler name=DicomPrintSpooler, n priority=normal, max retries=20, device type=CMI1000 or alias name, n device name (ie Aetitle)=CMI1000, n device address (ie IPaddr : Port)= eg 150.224.150.22:5040 n request annotation SOP class=true, request print job SOP class=false, n print job poll period=15, print job timeout=300, printer poll period=15, n association timeout=0, collate=false, custom lut file= n CFG://HOLX0040/linx_mp/resources/installed/raw/customluts_001/linear.lut n Photometric interpr.=MONOCHROME2, copies=1, medium type=BLUE FILM, n Film destination=PROCESSOR, Film Session Label=any text,memory allocation=0 n Print priority=MED, available image display formats= n PORTRAIT\1,1 PORTRAIT\1,2 PORTRAIT\2,1 PORTRAIT\2,2 n Image display format=PORTRAIT\1,1, annotation display format id=0 n Number of annotation boxes=1, annotation boxes per text line=1 n Max annot.box text string size=64, max text line size=64, film size id=8INX10IN n Film magnification type=CUBIC, film smoothing type=0, border density=BLACK n Empty image density=BLACK, full pixel range=true, min density=20, n max density=300, trim=NO, Configuration info=LUT=Wrkstn2a.w87,7 n polarity=NORMAL, available image mag.types=REPLICATE BILINEAR CUBIC
Kodak DirectView-DR 5000-DR 9000
DICOM Network
Kodak CMI 1000
Setup for Kodak DirectView DR 5000 / DR 9000 with LASER IMAGER Products
Author: [email protected], Edition: May ´05 41
n image mag.type=CUBIC, image smoothing type=11, true size=true, pixel size=139 n true size width crop=0, true size length crop=0, pad=true, auto rotate=false, n apply ruler=false, annotation position=0, n text string=<PatientName+ID+Date+Institution> n Update n Log as Application n Edit/Setup/select an already existing entry/Copy/rename it eg CMI1000 n into SETUP menu select the just created CMI1000 n Edit/laser_cameras/select last entry eg vdevdryview _004/Add/Accept CMI-1000 Setup: at Local Panel, under Media, set A4 or Letter ie what inside Paper Tray (CMI-1000 sw considers only this field and uses it as A4 or Letter (Always=Y): at Local Panel, under Menu, Imager Setup: n Network Setup: n IPAddr=accordingly, Subnet Mask=accordingly, Gateway=accordingly n under More Settings: DICOM Port=5040 n Edit Host Name/AE Title=CMI1000 n Modality (SCU) Config (or after modality recognition): n Select Modality=accordingly, Modality Config.Assistant=Yes, Reset Config=No n Note: Color IQ settings used when images sent with Color DICOM SOP n under Image Quality, Color Image Quality: (no need to adjust, leave defaults)
n Match Monitor Colors=default ie sRGB Color Space Profile.icm n Adjust Color Tones=default ie Default_Contrast_100.icm
n Note: Grayscale IQ settings used when images sent with Grayscale DICOM SOP: n under Image Quality, Grayscale Image Quality:
n Contrast=7 (Always=Y) n TFT Set (From list)=Wrkstn2a.w87 (Always=Y) n Wet Contrast=0 (Always=N), Curve Shape=429 (Always=N) n under More Quality Settings: n Tonescaling=Presentation LUT (Always=N), n Image Dmax=220 (Always=N), Image Dmin=10 (Always=N) n Smoothing=11 (Always=Y), Polarity=Positive (Always=N) n Interpolation=CUBIC (Always=N), Trim=No (Always=N) n Page Orientation=PORTRAIT (Always=N), Negotiate PLUT=No
n under Modality Defaults: n Media Size=8.5x11 (Always=N), don’t care, this field plays no role n Image Resizing=Minify (Always=N), n Priority=Normal (Always=N), NeventReports=No (Always=Y), n Warnings=Yes, Color=Yes n (set Color=No when only b/w images are printed and set it to be sure n to apply to the b/w images the Greyscale Image Quality settings) n Page Annotation: n Hosp.Name=No, Modality ID=No, Page Nbr=No, Date=No, Time= No
n Save Changes and Exit
Setup Manual for Kodak DR 5100/ 7100/5000 CU/9000 CU with LASER IMAGER Products
Author: [email protected], Edition: May ´05 1
TENTATIVE Setup for Kodak DirectView DR 5100/7100/5000cu/9000cu with LASER IMAGERS Connection via DICOM: n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /
Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual).................... 2 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /
Kodak DryView 8500 LASER IMAGER / Plus (see also 8800/8500 Dual).................... 4 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /
Kodak DryView 8100 LASER IMAGER......................................................................... 6 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /
Kodak DryView 8300 LASER IMAGER......................................................................... 8 n Kodak Digital Science 190 MEDICAL LASER PRINTER......................................... 10 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /
Kodak Ektascan 2180 LASER PRINTER ....................................................................... 12 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /
Kodak Ektascan 160 LASER IMAGER .......................................................................... 15 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /
Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual) (1)............... 18 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /
Kodak DryView 8500 LASER IMAGER / Plus (see also 8800/8500 Dual) (1)............... 21 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /
Kodak DryView 8100 LASER IMAGER (1).................................................................... 24 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /
Kodak DryView 8300 LASER IMAGER (1).................................................................... 27 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /
Kodak DryView 8200 LASER IMAGER (1).................................................................... 30 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /
Kodak DryView 8610 LASER IMAGING SYSTEM / for Mammography (see also 8600) (1) ............................................................................................................ 33
n Kodak DryView 8900 LASER IMAGER......................................................................... 36 n Kodak DryView 8150 LASER IMAGER......................................................................... 39 n Kodak Color Medical Imager 1000 ................................................................................. 42
1 setup valid also for Kodak PACS LINK 25 PRINT SERVER.
Setup Manual for Kodak DR 5100/ 7100/5000 CU/9000 CU with LASER IMAGER Products
Author: [email protected], Edition: May ´05 2
Kodak DirectView DR 5100 / 7100 / 5000 CU / 9000 CU via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /
Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual)
Requirements: DR 5100 / 7100 v1.0.0, MIM (inside DR) v5.0.b21 Requirements: 9410 v1.6, 8700 v1.34 Note: This setup is basically also valid for 8800/8700 Dual camera
by basically using the correspondent Model into 9410 Local Printers DR Setup, from Service Functions/Login/Exit to Desktop, into MIM Service: n on Configure, Network: n Computer Name=eg DRMIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Destination, Add, Print, Network, Qualified, 9410/8700, Set:
n General: Log.Name=8700, IPAddr=accordingly, Database=9410/8700 n General: Model=8700, Memory=32 n Media Info: Media=35x43cm, 4096x5217, 5217, (Blue) n DICOM Info: Protocol=DICOM 3.0, Service Class=Basic Grayscale Print n DICOM Info: Port=1024, AE Title=NER_9410, Counters=40, Timers=100 n Supported Items: Collation=On, Tonescaling=On n Interpolation: No Magnif=On, Bilinear=On, Replic=On, Cubic Spline=On n Format Types: Row Symmetric=On, 1, 2, 4, 6, 9, 12, 15, 16, 20, 24=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Trim=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: Max Img Band=4, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=0, Min Vert Sep=6 n Formatting: Trim Width when enabled=1, Trim Width when disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Max Image Dmax=3.1 n SCU: Density Space= On, Perception LUT =On n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7
Kodak DryView 8700 PlusKodak 9410 PACS Link
DICOM Network
3M 8700 DryView
Fiber Cable
Fiber Cable
Kodak DirectView-DR 5100-DR 7100-DR 5000 Console Upgrade-DR 9000 Console Upgrade
Setup Manual for Kodak DR 5100/ 7100/5000 CU/9000 CU with LASER IMAGER Products
Author: [email protected], Edition: May ´05 3
9410 Setup: n on Device Setup, LOCAL PRINTERS:
n Printer=8700, Model=8700, Output=Fiber n Baud=19200, Parity=None, Data=8, Stop=1, Command Set=Superset n Pixel=12, Header/Line, Timeout=60, Transfer Rate=2 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=11 Max.Density=300, Contrast=6, Border Density=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87
n on Device Setup, SCP PRINTERS, Current Providers: n Printer=8700, AE Title= NER_9410, Port= 1024, Max Associations= 5
n on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle=accordingly, SCU IPAddr=accordingly, SCP=8700 n Copies=1, Contrast Table=2, TFT/ULUT=Wrkstn2a.w87 n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=11 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0
8700 Plus Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=12, Header/Line, Parity=Enable Even, Port=0, Timeout=60
Setup Manual for Kodak DR 5100/ 7100/5000 CU/9000 CU with LASER IMAGER Products
Author: [email protected], Edition: May ´05 4
Kodak DirectView DR 5100 / 7100 / 5000 CU / 9000 CU via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /
Kodak DryView 8500 LASER IMAGER / Plus (see also 8800/8500 Dual)
Requirements: DR 5100 / 7100 v1.0.0, MIM (inside DR) v5.0.b21 Requirements: 9410 v1.6, 8500 v1.34 Note: This setup is basically also valid for 8800/8500 Dual camera
by basically using the correspondent Model into 9410 Local Printers DR Setup, from Service Functions/Login/Exit to Desktop, into MIM Service: n on Configure, Network: n Computer Name=eg DRMIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Destination, Add, Print, Network, Qualified, 9410/8500, Set:
n General: Log.Name=8500, IPAddr=accordingly, Database=9410/8500 n General: Model=8500, Memory=32 n Media Info: Media=11x14in, 3388x4277, 4277, (Blue) n DICOM Info: Protocol=DICOM 3.0, Service Class=Basic Grayscale Print n DICOM Info: Port=1024, AE Title=NER_9410, Counters=40, Timers=100 n Supported Items: Collation=On, Tonescaling=On n Interpolation: No Magnif=On, Bilinear=On, Replic=On, Cubic Spline=On n Format Types: Row Symmetric=On, 1, 2, 4, 6, 9, 12, 15, 16, 20=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Trim=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: Max Img Band=4, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=9, Min Vert Sep=6 n Formatting: Trim Width when enabled=1, Trim Width when disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Max Image Dmax=3.1 n SCU: Density Space= On, Perception LUT =On n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7
9410 Setup:
Kodak DryView 8500 PlusKodak 9410 PACS Link
DICOM Network
3M 8700 DryView
Fiber Cable
Fiber Cable
Kodak DirectView-DR 5100-DR 7100-DR 5000 Console Upgrade-DR 9000 Console Upgrade
Setup Manual for Kodak DR 5100/ 7100/5000 CU/9000 CU with LASER IMAGER Products
Author: [email protected], Edition: May ´05 5
n on Device Setup, LOCAL PRINTERS: n Printer=8500, Model=8500, Output=Fiber n Baud=19200, Parity=None, Data=8, Stop=1, Command Set=Superset n Pixel=12, Header/Line, Timeout=60, Transfer Rate=2 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=11, Max.Density=300, Contrast=6, Border Density=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87
n on Device Setup, SCP PRINTERS, Current Providers: n Printer=8500, AE Title= NER_9410, Port= 1024, Max Associations= 5
n on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle= accordingly, SCU IPAddr=accordingly, SCP=8500 n Copies=1, Contrast Table=2, TFT/ULUT=Wrkstn2a.w87 n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=11 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0
8500 Plus Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=12, Header/Line, Parity=Enable Even, Port=0, Timeout=60
Setup Manual for Kodak DR 5100/ 7100/5000 CU/9000 CU with LASER IMAGER Products
Author: [email protected], Edition: May ´05 6
Kodak DirectView DR 5100 / 7100 / 5000 CU / 9000 CU via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /
Kodak DryView 8100 LASER IMAGER
Requirements: DR 5100 / 7100 v1.0.0, MIM (inside DR) v5.0.b21 Requirements: 9410 v1.6, 8100 v2.4.1 DR Setup, from Service Functions/Login/Exit to Desktop, into MIM Service: n on Configure, Network: n Computer Name=eg DRMIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Destination, Add, Print, Network, Qualified, 9410/8100, Set:
n General: Log.Name=8100, IPAddr=accordingly, Database=9410/8100 n General: Model=8100, Memory=32 n Media Info: Media=35x43cm, 4096x5217, 5127, (Blue) n DICOM Info: Protocol=DICOM 3.0, Service Class=Basic Grayscale Print n DICOM Info: Port=1024, AE Title=NER_9410, Counters=40, Timers=100 n Supported Items: Collation=On, Tonescaling=On n Interpolation: No Magnif=On, Bilinear=On, Replic=On, Cubic Spline=On n Format Types: Row Symmetric=On, 1, 2, 4, 6, 9, 12, 15, 16, 20, 24=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Trim=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: Max Img Band=4, Max Band per Page=12, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=15, Min Vert Sep=6, n Formatting: Trim Width when enabled=0, Trim Width when disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Max Image Dmax=3.1 n SCU: Density Space= On, Perception LUT=On n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7
9410 Setup: on Device Setup, LOCAL PRINTERS: n Printer=8100, Model=8100 4096 pxls/line, Output=Copper n Baud=1200, Parity=Even, Data=8, Stop=1, Command Set=952
Kodak DryView 8100Kodak 9410 PACS Link
DICOM Network
COPCIL BoardCopper Cable Control 9-pin
Data 37-pin
RS4229-pole Plug
Kodak DirectView-DR 5100-DR 7100-DR 5000 Console Upgrade-DR 9000 Console Upgrade
Setup Manual for Kodak DR 5100/ 7100/5000 CU/9000 CU with LASER IMAGER Products
Author: [email protected], Edition: May ´05 7
n Pixel=12, Header/Line, Timeout=60, Transfer Rate=1 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=11, Max.Density=300, Contrast=6, Border Density=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87 on Device Setup, SCP PRINTERS, Current Providers: n Printer=8100, AE Title= NER_9410, Port= 1024, Max Associations= 5 on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle= accordingly, SCU IPAddr=accordingly n SCP=8100, Copies=1, Contrast Table=2, TFT/ULUT=Wrkstn2a.w87 n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=11 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0 8100 Setup on CONFIGURATION Menu: n on SIB board (ie external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=60, P1,…,P6=0
n on IMAGE QLTY-> Mag Scaling=Off, Pixel Correct=Off, 952 Override=Off n on IMAGE QUALITY-> TFT FILES: TFT=ver693c0.w87 n on LOCAL PANEL: Contrast=6, Density=3.00 n on SYSTEM Menu: Acquire=Digital, Max.Img.Columns=4361 n on DIGITAL Menu: Pixel Depth=12, Header/Line, Parity=Even
Setup Manual for Kodak DR 5100/ 7100/5000 CU/9000 CU with LASER IMAGER Products
Author: [email protected], Edition: May ´05 8
Kodak DirectView DR 5100 / 7100 / 5000 CU / 9000 CU via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /
Kodak DryView 8300 LASER IMAGER
Requirements: DR 5100 / 7100 v1.0.0, MIM (inside DR) v5.0.b21 Requirements: 9410 v1.6, 8300 v4.9.1, 8300 LUT v3.0.3B Note: The 9410/8300 configuration can not print the External Text Annotation Box, in this case MIM200/8300 solve the problem ie print External Text Annotation Box DR Setup, from Service Functions/Login/Exit to Desktop, into MIM Service: n on Configure, Network: n Computer Name=eg DRMIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Destination, Add, Print, Network, Qualified, 9410/8300, Set:
n General: Log.Name=8300, IPAddr=accordingly, Database=9410/8300 n General: Model=8300, Memory=32 n Media Info: Media=8x10in, 2256x2676, 2676, (Blue) n DICOM Info: Protocol=DICOM 3.0, Service Class=Basic Grayscale Print n DICOM Info: Port=1024, AE Title=NER_9410, Counters=40, Timers=100 n Supported Items: Collation=On, Tonescaling=On n Interpolation: No Magnif=On, Bilinear=On, Replic=On, Cubic Spline=On n Format Types: Row Symmetric=On, 1, 2, 4, 6=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Trim=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=0, Min Vert Sep=6 n Formatting: Trim Width when enabled=0, Trim Width when disabled=0 n Formatting: Pixel Pitch=11.9048 n Image Processing: Grayscale=On, Max Image Dmax=3 n SCU: Density Space= On, Perception LUT=On n M952 Usage: Min H/V Mag=1, Max H/V Mag=16, Min Dmax 952=1.5
9410 Setup:
Kodak DryView 8300Kodak 9410 PACS Link
DICOM Network
Control 9 pin
Data 37 pin
COPCIL board Copper Cable
Kodak DirectView-DR 5100-DR 7100-DR 5000 Console Upgrade-DR 9000 Console Upgrade
Setup Manual for Kodak DR 5100/ 7100/5000 CU/9000 CU with LASER IMAGER Products
Author: [email protected], Edition: May ´05 9
n on Device Setup, LOCAL PRINTERS: n Printer=8300, Model=8300 Copper, Output=Copper n Command Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Pixel=8, Header/Line, Timeout=60, Transfer Rate=1 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=0, Max.Density=300, Contrast=6, Border Density=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT= upmsv3k.w8u
n on Device Setup, SCP PRINTERS, Current Providers: n Printer=8300, AE Title= NER_9410, Port= 1024, Max Associations= 5 n on Device Setup, SCP PRINTERS, Registered Users:
n SCU AETitle= accordingly, SCU IPAddr=accordingly n SCP=8300, Copies=1, Contrast Table=1, TFT/ULUT= wrkstn83a.w8u n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=0 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0
8300 Setup: n on Operator Menu set: D=16, C=6, Sharp/Smooth=0 ie Auto n on Operator Menu set: Film Layout: 1 on 1=Portrait n on Service Menu set: Ratio=1.00, Serial=1200,8,1,Even,Comma,3M, Memory=16 n on Service Menu set: Digital Interface: Parity=Even, Modality Group=1
Setup Manual for Kodak DR 5100/ 7100/5000 CU/9000 CU with LASER IMAGER Products
Author: [email protected], Edition: May ´05 10
Kodak DirectView DR 5100 / 7100 / 5000 CU / 9000 CU via DICOM with Kodak Digital Science 190 MEDICAL LASER PRINTER
Requirements: Kodak DR 5100 / 7100 v1.0.0, MIM (inside DR) v5.0.b21 Requirements: 190 rel. 1.7.29 DR Setup, from Service Functions/Login/Exit to Desktop, into MIM Service: n on Configure, Network: n Computer Name=eg DRMIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Destination, Add, Print, Network, Qualified, 190, Set:
n General: Log.Name=190, IPAddr=accordingly, Database Name=190 n General: Model=190, Memory=32 n Media Info: Media=35x43cm, 4096x5120, 5000, Any (Blue,Clear) n DICOM Info: Protocol=DICOM 3.0, Service Class=Basic Grayscale Print n DICOM Info: Port=5040, AE Title=NER_ANY,Counters=40,Timers=100 n Supported Items: Collation=On, Common Text=On, Tonescaling=On n Supported Items: Pivot Density=On, Remote Image Del=On, Rotation=On n Interpolation: No Magnif=On, Bilinear=On, Replic=On, Cubic Spline=On n Interpolation: Cubic Convolution 2=On, Cubic Convolution 3=On n Format Types: Custom Formats=On, Slide Format=On, Row Symm.=On n Format Types: Super Slide=On, 1,2,4,6,8,9,12,15,16,20,24,30,35=On n Formatting: Trim=On, Req.Image Size=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=0, Min Vert Sep=0 n Formatting: Trim Width when enabled=0, Trim Width when disabled=0 n Formatting: Pixel Pitch=12.5 n Image Processing: Color=On, Color/Grayscale=On, n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 n SCU: Density Space= On, Curve Shape=On n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7
190 Setup: n On 190 Control Panel press Menu, Setup: n Printer Density=3.00, Curve Shape=0.0, Contrast=0, Contrast Pivot Density=1.2 n IPAddress=accordingly, Subnet Mask=accordingly, Gateway Address=accordingly n Port=5040, Network Node Name=Kodak MLP190, Connection Type=RJ45
DICOM Network
Kodak 190 cameraKodak DirectView-DR 5100-DR 7100-DR 5000 Console Upgrade-DR 9000 Console Upgrade
Setup Manual for Kodak DR 5100/ 7100/5000 CU/9000 CU with LASER IMAGER Products
Author: [email protected], Edition: May ´05 11
Kodak DirectView DR 5100 / 7100 / 5000 CU / 9000 CU via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /
Kodak Ektascan 2180 LASER PRINTER
Requirements: DR 5100 / 7100 v1.0.0, MIM (inside DR) v5.0.b21 Requirements: MIM200 v6.1, 2180 v2.17H DR Setup, from Service Functions/Login/Exit to Desktop, into MIM Service: n on Configure, Network: n Computer Name=eg DRMIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Destination, Add, Print, Network, Qualified, MIM/2180, Set:
n General: Log.Name=2180, IPAddr=accordingly, Database=MIM/2180 n General: Model=2180, Memory=32 n Media Info: Media=35x43cm, 4096x5156, 5026, Any (Blue,Clear) n Media Info: Media=35x35cm, 4096x4132, 4002, Any (Blue,Clear) n Media Info: Media=11x14in, 3236x4132, 4002, Any (Blue,Clear) n Media Info: Media=8x10in, 2286x2836, 2706, Any (Blue,Clear) n DICOM Info: Protocol=DICOM 3.0, Service Class=Basic Grayscale Print n DICOM Info: Port=5040, AE Title=NER_2180, Counters=40, Timers=100 n Supported Items: Collation=On, Common Text=On, Tonescaling=On n Supported Items: Remote Image Deletion=On, Rotation=On n Interpolation: No Magnif=On, Bilinear=On, Replic=On, Cubic Spline=On n Interpolation: Cubic Convolution 2=On, Cubic Convolution 3=On n Format Types: Custom Formats=On, Slide Format=On, Row Symm.=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On n Formatting: Req.Size Scale=On, Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=0, Min Vert Sep=2 n Formatting: Trim Width when enabled=2, Trim Width when disabled=2 n Formatting: Pixel Pitch=12.6582
Kodak MIM 200
DICOM Network
Fiber Cable
Kodak 2180 cameraKodak DirectView-DR 5100-DR 7100-DR 5000 Console Upgrade-DR 9000 Console Upgrade
Setup Manual for Kodak DR 5100/ 7100/5000 CU/9000 CU with LASER IMAGER Products
Author: [email protected], Edition: May ´05 12
n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 n SCU: Density Space= On, Variable Border=On, Curve Shape =On n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7
MIM200 Setup: n on Configure, Network: n Computer Name=eg Kodak2180, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, KELP 2180, Set:
n General: Log.Name=KELP2180, Database Name=KELP 2180 n General: Model=KELP 2180, Memory=24, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4136x5160, 5030, (Blue) n Media Info:Media=35x35cm,4136x4136,4006, (Blue) n Media Info: Media=11x14in, 3240x4136, 4006, (Blue) n Media Info: Media=8x10in, 2290x2840, 2710, (Blue) n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=2 n Formatting: Pixel Pitch=12.6582 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7
n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape= 0 (Always=N), Contrast (wet)=0 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Minify/Scale=On, Crop=Off, Text Box Relocation=None n Print Priority=Normal (Always=N), Border=Black (Always=N) n Interpolation=Cubic, Border Dmax=3.99 n Film Size=14INx17IN (Always=N), Film Output Dest=Bin 9 (Always=N) n Negotiate Color Print=Off
2180 Setup: n Optical Interface board will automatic configure into 2180, no setup needed
Setup Manual for Kodak DR 5100/ 7100/5000 CU/9000 CU with LASER IMAGER Products
Author: [email protected], Edition: May ´05 13
Kodak DirectView DR 5100 / 7100 / 5000 CU / 9000 CU via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /
Kodak Ektascan 160 LASER IMAGER
Requirements: DR 5100 / 7100 v1.0.0, MIM (inside DR) v5.0.b21 Requirements: MIM 200 v6.1, KELI 160 v7.2 DR Setup, from Service Functions/Login/Exit to Desktop, into MIM Service: n on Configure, Network: n Computer Name=eg DRMIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Destination, Add, Print, Network, Qualified, 160, Set:
n General: Log.Name=160, IPAddr=accordingly, Database Name=160 n General: Model=160 n Media Info: Media=35x43cm, 4361x5348, 5228, (Blue) n DICOM Info: Protocol=DICOM 3.0, Service Class=Basic Grayscale Print n DICOM Info: Port=5040, AE Title=NER_160, Counters=40, Timers=100 n Supported Items: Collation=On, Common Text=On, Tonescaling=On n Supported Items: Pivot Density=On, Remote Image Del=On, Rotation=On n Interpolation: No Magnif=On, Bilinear=On, Replic=On, Cubic Spline=On n Interpolation: Cubic Convolution 2=On n Format Types: Custom Formats=On, Slide Format=On, Row Symm.=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On n Formatting: Req.Size Scale=On, Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width when enabled=2, Trim Width when disabled=0 n Formatting: Pixel Pitch=12.8 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 n SCU: Density Space= On, Curve Shape=On
Kodak MIM 200
DICOM Network
CrossedNetwork Cable
Kodak 160 cameraKodak DirectView-DR 5100-DR 7100-DR 5000 Console Upgrade-DR 9000 Console Upgrade
Setup Manual for Kodak DR 5100/ 7100/5000 CU/9000 CU with LASER IMAGER Products
Author: [email protected], Edition: May ´05 14
n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7 MIM200 Setup: n on Configure, Network: n Computer Name=eg Kodak160, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, KELI 160, Set:
n General: Log.Name=160, IPAddr=100.100.100.30, n General: Database Name=KELI 160, Model=KELI 160 n Media Info: Media=35x43cm, 4361x5348, 5228, Any (Blue,Clear) n Supported Item: Collation=On, Text=On, Tonescaling on Image=On n Supported Item: Pivot Density=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7
n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape= 0 (Always=N), Contrast (wet)=0 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n Interpolation=Cubic, Image Polarity=Normal (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Minify/Scale=On, Crop=Off, Text Box Relocation=None (Always=N) n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N) n Negotiate Color Print=Off
160 Setup: no modality-specific setup needed
Setup Manual for Kodak DR 5100/ 7100/5000 CU/9000 CU with LASER IMAGER Products
Author: [email protected], Edition: May ´05 15
Kodak DirectView DR 5100 / 7100 / 5000 CU / 9000 CU via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /
Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual)
Requirements: DR 5100 / 7100 v1.0.0, MIM (inside DR) v5.0.b21 Requirements: MIM200 v6.1, 8700 v1.34 Note: This setup is basically also valid for 25 PS computer Note: This setup is basically also valid for 8800/8700 Dual camera
by basically using the correspondent Model into MIM200 Destination DR Setup, from Service Functions/Login/Exit to Desktop, into MIM Service: n on Configure, Network: n Computer Name=eg DRMIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Destination, Add, Print, Network, Qualified, MIM/8700, Set:
n General: Log.Name=8700, IPAddr=accordingly, Database=MIM/8700 n General: Model=8700, Memory=32 n Media Info: Media=35x43cm, 4096x5217, 5217, (Blue) n DICOM Info: Protocol=DICOM 3.0, Service Class=Basic Grayscale Print n DICOM Info: Port=5040, AE Title=NER_8700, Counters=40, Timers=100 n Supported Items: Collation=On, Common Text=On, Tonescaling=On n Supported Items: Remote Image Deletion=On, Rotation=On n Interpolation: No Magnif=On, Bilinear=On, Replic=On, Cubic Spline=On n Interpolation: Cubic Convolution 2=On, Cubic Convolution 3=On n Format Types: Custom Formats=On, Slide Format=On, Row Symm.=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On n Formatting: Req.Size Scale=On, Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On
n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2
Kodak DryView 8700 Plus
DICOM Network
3M 8700 DryView
Fiber Cable
Fiber Cable
Kodak MIM 200
Kodak DirectView-DR 5100-DR 7100-DR 5000 Console Upgrade-DR 9000 Console Upgrade
Setup Manual for Kodak DR 5100/ 7100/5000 CU/9000 CU with LASER IMAGER Products
Author: [email protected], Edition: May ´05 16
n Formatting: Trim Width when enabled=2, Trim Width when disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n SCU: Density Space= On, Perception LUT =On n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7
MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8700, Set:
n General: Log.Name=8700 n General: Database Name=8700, Model=8700, Memory=32 n Media Info: Media=35x43cm, 4096x5223, 5133, Blue n Output Params: Cmd=SuperSet,Baud=19200,Data=8,Stop=1,Parity=None n Output Params: Pixel=12, Header/Line, Transfer=2000 KHz, Acq=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7
n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT= Wrkstn2a.w87 (Always=Y), Contrast (dry)=2 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n Smoothing Type=11 (Always=N), Image Polarity=Normal (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Minify/Scale=On, Crop=Off, Text Box Relocation=None n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N) n Negotiate Color Print=Off
8700 Plus Setup: n on COMM Menu: 969 Default
Setup Manual for Kodak DR 5100/ 7100/5000 CU/9000 CU with LASER IMAGER Products
Author: [email protected], Edition: May ´05 17
n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=12, Header/Line, Parity=Disable Even, Port=0, Timeout=60
Setup Manual for Kodak DR 5100/ 7100/5000 CU/9000 CU with LASER IMAGER Products
Author: [email protected], Edition: May ´05 18
Kodak DirectView DR 5100 / 7100 / 5000 CU / 9000 CU via DICOM with| Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /
Kodak DryView 8500 LASER IMAGER / Plus (see also 8800/8500 Dual)
Requirements: DR 5100 / 7100 v1.0.0, MIM (inside DR) v5.0.b21 Requirements: MIM200 v6.1, 8500 v1.34 Note: This setup is basically also valid for 25 PS computer Note: This setup is basically also valid for 8800/8500 Dual camera
by basically using the correspondent Model into MIM200 Destination DR Setup, from Service Functions/Login/Exit to Desktop, into MIM Service: n on Configure, Network: n Computer Name=eg DRMIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Destination, Add, Print, Network, Qualified, MIM/8500, Set:
n General: Log.Name=8500, IPAddr=accordingly, Database=MIM/8500 n General: Model=8500, Memory=32 n Media Info: Media=11x14in, 3388x4277, 4187, (Blue) n DICOM Info: Protocol=DICOM 3.0, Service Class=Basic Grayscale Print n DICOM Info: Port=5040, AE Title=NER_8500, Counters=40, Timers=100 n Supported Items: Collation=On, Common Text=On, Tonescaling=On n Supported Items: Remote Image Deletion=On, Rotation=On n Interpolation: No Magnif=On, Bilinear=On, Replic=On, Cubic Spline=On n Interpolation: Cubic Convolution 2=On, Cubic Convolution 3=On n Format Types: Custom Formats=On, Slide Format=On, Row Symm.=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On n Formatting: Req.Size Scale=On, Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On
n Formatting: True Landscape=On n Formatting: Max Img Band=4, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2
Kodak DryView 8500 Plus
DICOM Network
3M 8700 DryView
Fiber Cable
Fiber Cable
Kodak MIM 200
Kodak DirectView-DR 5100-DR 7100-DR 5000 Console Upgrade-DR 9000 Console Upgrade
Setup Manual for Kodak DR 5100/ 7100/5000 CU/9000 CU with LASER IMAGER Products
Author: [email protected], Edition: May ´05 19
n Formatting: Trim Width when enabled=2, Trim Width when disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n SCU: Density Space= On, Perception LUT =On n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7
MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8500, Set:
n General: Log.Name=8500 n General: Database Name=8500, Model=8500, Memory=32 n Media Info: Media=11x14in, 3388x4283, 4193, Blue n Output Params: Cmd=SuperSet,Baud=19200,Data=8,Stop=1,Parity=None n Output Params: Pixel=12, Header/Line, Transfer=2000 KHz, Acq=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7
n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT= Wrkstn2a.w87 (Always=Y), Contrast (dry)=2 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n Smoothing Type=11 (Always=N), Image Polarity=Normal (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Minify/Scale=On, Crop=Off, Text Box Relocation=None n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n Film Base=Blue Film (Always=N), Film Size=11INx14IN (Always=N) n Negotiate Color Print=Off
8500 Plus Setup: n on COMM Menu: 969 Default
Setup Manual for Kodak DR 5100/ 7100/5000 CU/9000 CU with LASER IMAGER Products
Author: [email protected], Edition: May ´05 20
n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=12, Header/Line, Parity=Disable Even, Port=0, Timeout=60
Setup Manual for Kodak DR 5100/ 7100/5000 CU/9000 CU with LASER IMAGER Products
Author: [email protected], Edition: May ´05 21
Kodak DirectView DR 5100 / 7100 / 5000 CU / 9000 CU via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /
Kodak DryView 8100 LASER IMAGER
Requirements: DR 5100 / 7100 v1.0.0, MIM (inside DR) v5.0.b21 Requirements: MIM200 v6.1, 8100 v2.4.1 Note: This setup is basically also valid for 25 PS computer DR Setup, from Service Functions/Login/Exit to Desktop, into MIM Service: n on Configure, Network: n Computer Name=eg DRMIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Destination, Add, Print, Network, Qualified, MIM/8100, Set:
n General: Log.Name=8100, IPAddr=accordingly, Database=MIM/8100 n General: Model=8100, Memory=32 n Media Info: Media=35x43cm, 4096x5217, 5127, (Blue) n DICOM Info: Protocol=DICOM 3.0, Service Class=Basic Grayscale Print n DICOM Info: Port=5040, AE Title=NER_8100, Counters=40, Timers=100 n Supported Items: Collation=On, Common Text=On, Tonescaling=On n Supported Items: Remote Image Deletion=On, Rotation=On n Interpolation: No Magnif=On, Bilinear=On, Replic=On, Cubic Spline=On n Interpolation: Cubic Convolution 2=On, Cubic Convolution 3=On n Format Types: Custom Formats=On, Slide Format=On, Row Symm.=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On n Formatting: Req.Size Scale=On, Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2, n Formatting: Trim Width when enabled=2, Trim Width when disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1
Kodak DryView 8100
DICOM Network
COPCIL BoardCopper Cable Control 9-pin
Data 37-pin
RS4229-pole Plug
Kodak MIM 200
Kodak DirectView-DR 5100-DR 7100-DR 5000 Console Upgrade-DR 9000 Console Upgrade
Setup Manual for Kodak DR 5100/ 7100/5000 CU/9000 CU with LASER IMAGER Products
Author: [email protected], Edition: May ´05 22
n SCU: Density Space= On, Perception LUT=On n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7
MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8100, Set:
n General: Log.Name=8100 n General: Database Name=8100, Model=8100, Memory=32 n Media Info: Media=35x43cm, 4096x5223, 5133, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=12, Header/Line, Transfer=1000 KHz, Acquire=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7
n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT= Wrkstn2a.w87 (Always=Y), Contrast (dry)=2 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n Smoothing Type=11 (Always=N), Image Polarity=Normal (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Minify/Scale=On, Crop=Off, Text Box Relocation=None n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N) n Negotiate Color Print=Off
8100 Setup on CONFIGURATION Menu: n on SIB board (ie external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=90, P1,…,P6=0
Setup Manual for Kodak DR 5100/ 7100/5000 CU/9000 CU with LASER IMAGER Products
Author: [email protected], Edition: May ´05 23
n on IMAGE QLTY-> Mag Scaling=Off, Pixel Correct=Off, 952 Override=Off n on IMAGE QUALITY-> TFT FILES Menu: TFT=Ver693c0.w87 n on LOCAL PANEL Menu: Contrast=6, Density=3.00 n on SYSTEM Menu: Acquire=Digital, Max.Img.Columns=4361 n on DIGITAL Menu: Pixel Depth=12, Header/Line, Parity=Even
Setup Manual for Kodak DR 5100/ 7100/5000 CU/9000 CU with LASER IMAGER Products
Author: [email protected], Edition: May ´05 24
Kodak DirectView DR 5100 / 7100 / 5000 CU / 9000 CU via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /
Kodak DryView 8300 LASER IMAGER
Requirements: DR 5100 / 7100 v1.0.0, MIM (inside DR) v5.0.b21 Requirements: MIM200 v6.1, 8300 v4.9.1, 8300 LUT v3.0.3B Note: This setup is basically also valid for 25 PS computer DR Setup, from Service Functions/Login/Exit to Desktop, into MIM Service: n on Configure, Network: n Computer Name=eg DRMIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Destination, Add, Print, Network, Qualified, MIM/8300, Set:
n General: Log.Name=8300, IPAddr=accordingly, Database=MIM/8300 n General: Model=8300, Memory=32 n Media Info: Media=8x10in, 2256x2676, 2596, (Blue) n DICOM Info: Protocol=DICOM 3.0, Service Class=Basic Grayscale Print n DICOM Info: Port=5040, AE Title=NER_8300, Counters=40, Timers=100 n Supported Items: Collation=On, Common Text=On, Tonescaling=On n Supported Items: Remote Image Deletion=On, Rotation=On n Interpolation: No Magnif=On, Bilinear=On, Replic=On, Cubic Spline=On n Interpolation: Cubic Convolution 2=On, Cubic Convolution 3=On n Format Types: Custom Formats=On, Slide Format=On, Row Symm.=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On n Formatting: Req.Size Scale=On, Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width when enabled=2, Trim Width when disabled=0 n Formatting: Pixel Pitch=11.9048 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3
Kodak DryView 8300
DICOM Network
Control 9 pin
Data 37 pin
COPCIL board Copper Cable
Kodak MIM 200
Kodak DirectView-DR 5100-DR 7100-DR 5000 Console Upgrade-DR 9000 Console Upgrade
Setup Manual for Kodak DR 5100/ 7100/5000 CU/9000 CU with LASER IMAGER Products
Author: [email protected], Edition: May ´05 25
n SCU: Density Space= On, Perception LUT=On n M952 Usage: Min H/V Mag=1, Max H/V Mag=16, Min Dmax 952=1.5
MIM200 Setup: n on Configure, Network:
n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, 8300, Set: n General: Log.Name=8300 n General: Database Name=8300, Model=8300, Memory=32 n Media Info: Media=8x10in, 2256x2676, 2596, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=8, Header/Line, Transfer=2000 KHz, Acquire=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symm.=On, SuperSlide=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=11.9048 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3 n M952 Usage: Min H/V Mag=1, Max H/V Mag=16, Min Dmax 952=1.5
n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT= wkstn83a.w8u (Always=Y), Contrast (dry)=1 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n Smoothing Type=4 (Always=N), Image Polarity=Normal (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Minify/Scale=On, Crop=Off, Text Box Relocation=None n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n Film Base=Blue Film (Always=N), Film Size=8INx10IN (Always=N) n Negotiate Color Print=Off
8300 Setup: n on Operator Menu set: D=16, C=6, Sharp/Smooth=0 ie Auto n on Operator Menu set: Film Layout: 1 on 1=Portrait n on Service Menu set: Ratio=1.00, Serial=1200,8,1,Even,Comma,3M, Memory=16 n on Service Menu set: Digital Interface: Parity=Even, Modality Group=1
Setup Manual for Kodak DR 5100/ 7100/5000 CU/9000 CU with LASER IMAGER Products
Author: [email protected], Edition: May ´05 26
Kodak DirectView DR 5100 / 7100 / 5000 CU / 9000 CU via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /
Kodak DryView 8200 LASER IMAGER
Requirements: DR 5100 / 7100 v1.0.0, MIM (inside DR) v5.0.b21 Requirements: MIM200 v6.1, 8200 v3.5 Note: This setup is basically also valid for 25 PS computer DR Setup, from Service Functions/Login/Exit to Desktop, into MIM Service: n on Configure, Network: n Computer Name=eg DRMIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Destination, Add, Print, Network, Qualified, MIM/8200, Set:
n General: Log.Name=MIM8200, IPAddr=accordingly n General: Database Name=MIM/8200, Model=8200, Memory=32 n Media Info: Media=35x43cm, 4361x5223, 5133, Any (Blue,Clear) n Media Info: Media=35x35cm, 4361x4247, 4157, Any (Blue,Clear) n Media Info: Media=11x14in, 3272x4361, 4271, Any (Blue,Clear) n DICOM Info: Protocol=DICOM 3.0, Service Class=Basic Grayscale Print n DICOM Info: Port=5040, AE Title=NER_8200, Counters=40, Timers=100 n Supported Items: Collation=On, Common Text=On, Tonescaling=On n Supported Items: Remote Image Deletion=On, Rotation=On n Interpolation: No Magnif=On, Bilinear=On, Replic=On, Cubic Spline=On n Interpolation: Cubic Convolution 2=On, Cubic Convolution 3=On n Format Types: Custom Formats=On, Row Symm.=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On n Formatting: Req.Size Scale=On, Req.Size Mix Row=On n Formatting: Trim=On, Aspect Ratio Mix in Row=On, n Formatting: Image Size Mix in Row=On, Req.Image Size=On, n Formatting: Req.Size Mix on Page=On, True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width when enabled=2, Trim Width when disabled=0
Kodak MIM 200
DICOM Network
CrossedNetwork Cable
Kodak DryView 8200
Kodak DirectView-DR 5100-DR 7100-DR 5000 Console Upgrade-DR 9000 Console Upgrade
Setup Manual for Kodak DR 5100/ 7100/5000 CU/9000 CU with LASER IMAGER Products
Author: [email protected], Edition: May ´05 27
n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n SCU: Density Space= On, Variable Border=On, Perception LUT=On n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7
MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8200, Set:
n General: Log.Name=8200, IPAddr=100.100.100.40, n General: Database Name=8200, Model=8200, Memory=32 n Media Info: Media=35x43cm, 4361x5223, 5133, Any (Blue,Clear) n Media Info: Media=35x35cm, 4361x4247, 4157, Any (Blue,Clear) n Media Info: Media=11x14in, 3272x4361, 4271, Any (Blue,Clear) n Supported Item: Collation=On, Common Text=On, Tonescaling=On n Supported Item: Remote Image Deletion=On, Rotation=On n Interpolation: No Magnification=On, Bilin=On, Repl=On n Interpolation: Cubic Spline=On, Cubic Convolution 2=On n Format Types: Custom=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n SCU: Density Space= On, Variable Border=On, PLUT Service= On n SCU: Curve Shape Tonescaling=On, Perception LUT Tonescaling=On n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7
n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT= Wrkstn2a.w87 (Always=Y), Contrast (dry)=2 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n Smoothing Type=11 (Always=N), Image Polarity=Normal (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Minify/Scale=On, Crop=Off, Text Box Relocation=None n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N) n Negotiate Color Print=Off
Setup Manual for Kodak DR 5100/ 7100/5000 CU/9000 CU with LASER IMAGER Products
Author: [email protected], Edition: May ´05 28
8200 Setup on CONFIGURATION Menu: n on IMAGE QUALITY-> TFT FILES Menu: TFT=Ver693c0.w87 n on LOCAL PANEL Menu: Contrast=6, Density=3.00 n on DICOM Menu: SCU Conf.:AE=MIM, TFT=VER693C0, C=6, Smoothing=0 n on DICOM Menu: DICOM Config.: AE=NER_ANY, Port=1025
Setup Manual for Kodak DR 5100/ 7100/5000 CU/9000 CU with LASER IMAGER Products
Author: [email protected], Edition: May ´05 29
Kodak DirectView DR 5100 / 7100 / 5000 CU / 9000 CU via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8610 LASER IMAGING SYSTEM / for Mammography
(see also 8600)
Requirements: DR 5100 / 7100 v1.0.0, MIM (inside DR) v5.0.b21 Requirements: MIM200 v6.1, 8610 v2.4 (if 8600 v2.5) Note: This setup is basically also valid for 25 PS computer Note: This setup is basically also valid for 8600 camera DR Setup, from Service Functions/Login/Exit to Desktop, into MIM Service: n on Configure, Network: n Computer Name=eg DRMIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Destination, Add, Print, Network, Qualified, MIM/8610, Set: n General: Log.Name=8610, IPAddr= accordingly, n General: Database Name=MIM/8610, Model=8610, Memory=32 n Media Info: Media=8x10in, 5025x6200, 6020, Blue n DICOM Info: Protocol=DICOM 3.0, Service Class=Basic Grayscale Print n DICOM Info: Port =5040, AE Title=NER_8610, Retry=40, Response=100 n Supported Item: Collation=On, Common Text=On, Tonescaling=On n Supported Item: Remote Image Deletion=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Interpolation: Cubic Conv.2=On, Cubic Conv.3=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On n Formatting: Req.Size Scale=On, Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0
DICOM Network
Control 9 pin
Data 37 pin
COPCIL board Copper Cable
Kodak MIM 200
Kodak DirectView-DR 5100-DR 7100-DR 5000 Console Upgrade-DR 9000 Console Upgrade
Kodak DryView 8610
Setup Manual for Kodak DR 5100/ 7100/5000 CU/9000 CU with LASER IMAGER Products
Author: [email protected], Edition: May ´05 30
n Formatting: Pixel Pitch=26.3158 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.5 n SCU: Density Space=On, Perception LUT =On n M952 Usage: Min H/V Mag=0.26, Max H/V Mag=16, Min Dmax 952=2 MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8610 (or 8600), Set:
n General: Log.Name=8610 (or 8600), n General: Database=8610 (or 8600), Model=8610 (or 8600), Memory=32 n Media Info: Media=8x10in, 5025x6200, 6020, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=12 (8 if 8600), Header/Line, Transfer=2000,Acq=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=25.8065 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.5 n M952 Usage: Min H/V Mag=0.26, Max H/V Mag=16, Min Dmax 952=2
n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT= upmsv3kp.w8u (Always=N), Contrast (dry)=6 (Always=Y) n Modality Group=1, Conv.Group=1, Gamma Table=Linear in Density n Image Dmin=0.00 (Always=N), Image Dmax=3.50 (Always=Y) n Smoothing Type=1 (Always=Y), Image Polarity=Normal (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Minify/Scale=On, Crop=Off, Text Box Relocation=None n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n Film Base=Blue Film (Always=N), Film Size=8INx10IN (Always=N) n Negotiate Color Print=Off
8610 Setup: on 8610 Operator Menu into Test Menu, Software Version, verify:
n Imager=2.4, VRTX32=1.08, Contrast=6.P.2, Conv.Kernel=M.1.0
Setup Manual for Kodak DR 5100/ 7100/5000 CU/9000 CU with LASER IMAGER Products
Author: [email protected], Edition: May ´05 31
n (if 8600: Imager=2.5, Contrast=6.G.7, Conv.Kernel=1.0.5) n on 8610 Operator Menu into Configure User set:
n Density=16, Contrast=6, Sharp/Smooth=1, Film Layout: 1 on 1=Portrait n Gamma= Xmittance, Image Size=Scale To Fit, Detector Size= don’t care
n on 8610 Service Menu into Configure User set: n Ratio=1.00, Serial Control Intf.=1200,8,1,Even,Comma,3M, Memory=127 n Digital Interface: Parity=Even, Modality Group=1, Smoothing Group=1
Setup Manual for Kodak DR 5100/ 7100/5000 CU/9000 CU with LASER IMAGER Products
Author: [email protected], Edition: May ´05 32
Kodak DirectView DR 5100 / 7100 / 5000 CU / 9000 CU via DICOM with Kodak DryView 8900 LASER IMAGER
Requirements: DR 5100 / 7100 v1.0.0, MIM (inside DR) v5.0.b21 Requirements: 8900 rev.E ie rel.2.11 (ie DRE v2.11, MIM v5.6.b5, MCS v2.10) DR Setup, from Service Functions/Login/Exit to Desktop, into MIM Service: n on Configure, Network: n Computer Name=eg DRMIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Destination, Add, Print, Network, Unqualified, Set:
n General: Log.Name=8900, IPAddr=accordingly n General: Database=unqualified, Model=8900, Memory=32 n Media Info: Media=35x43cm, 8244x9999, 9767, (Blue) n Media Info: Media=35x35cm, 8244x8232, 8000, (Blue) n Media Info: Media=11x14in, 6465x8244, 8012, (Blue) n Media Info: Media=10x12in, 5879x7036, 6804, (Blue) n Media Info: Media=8x10in, 4681x5879, 5647, (Blue) n DICOM Info: Protocol=DICOM 3.0, Service Class=Basic Grayscale Print n DICOM Info: Port=5040, AE Title=NER_8900, Counters=40, Timers=100 n Supported Items: Collation=On, Common Text=On, Tonescaling=On n Supported Items: Remote Image Deletion=On, Rotation=On n Interpolation: No Magnif=On, Bilinear=On, Replic=On, Cubic Spline=On n Interpolation: Cubic Convolution 2=On, Cubic Convolution 3=On n Format Types: Custom Formats=On, Row Symm.=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On n Formatting: Req.Size Scale=On, Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=7, Max Band per Page=7, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=4, Min Vert Sep=4 n Formatting: Trim Width when enabled=4, Trim Width when disabled=0 n Formatting: Pixel Pitch=23.18423566
Kodak DirectView-DR 5100-DR 7100-DR 5000 Console Upgrade-DR 9000 Console Upgrade
DICOM Network
Kodak DryView 8900
Setup Manual for Kodak DR 5100/ 7100/5000 CU/9000 CU with LASER IMAGER Products
Author: [email protected], Edition: May ´05 33
n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.3 n SCU: Density Space= On, Perception LUT =On n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7
8900 Setup: n on Configuration, System, Network: n Host Name=DV8900, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configuration, DICOM SCP, Communications:
n Port=5040, Association Limit=12, Source Name=DICOM n on Configuration, Destination:
n General: Log.Name=8900 n Media Types: Media=35x43cm, 9100x11037, 10781, Any n Media Types: Media=35x35cm,9100x9087, 8831, Any n Media Types: Media=11x14in, 7137x9100, 8844, Any n Media Types: Media=10x12in, 6490x7767, 7511, Any n Media Types: Media=8x10in, 5167x6490, 6234, Any n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On n Formatting: DICOM Annotation Box=On, Req.Image Size=On n Formatting: Req.Size Scale=On, Req.Size Mix Page=On n Formatting: Req.Size Mix Row=On, Trim=On, n Formatting: True Landscape=On, Rotation=On n Formatting: Minify/Crop=On, Tonescaling on Image Basis=On n Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0 n Formatting: Max Img Rows=0, Pixel Pitch=25.5910, Min Horiz Sep=4 n Formatting: Min Vert Sep=4, Trim Width Enabled=4 n Formatting: Trim Width Disabled=0, Maximum DMAX=3.30
n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify: n Negotiate Presentation LUT=No, Negotiate Color Print=No n TFT= Wrkstn2a.w87 (Always=N), Contrast=2 (Always=N) n Smoothing Type=11 (Always=N), Image Polarity=Normal (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=No (Always=Y), Warnings=Yes n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n 2mm Border=Yes, Film Clip Border=No, Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Sorter Bin=Bin1 (Always=N) n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No n Modality ID=No, Annotation Override=No, Density Patch=No n Image Resizing=Minify/Scale (Always=N), n Text Box Location=None, Source ID=dr
Setup Manual for Kodak DR 5100/ 7100/5000 CU/9000 CU with LASER IMAGER Products
Author: [email protected], Edition: May ´05 34
Kodak DirectView DR 5100 / 7100 / 5000 CU / 9000 CU via DICOM with Kodak DryView 8150 LASER IMAGER
Requirements: Kodak DR 5100 / 7100 v1.0.0 (MIM inside DR v5.0.b21) Requirements: 8150 v0.08.b6 (DRE=DV8150_DRE_0.08.b6, MIM=MIM_v5.7.b6) DR Setup, from Service Functions/Login/Exit to Desktop, into MIM Service: n on Configure, Network: n Computer Name=eg DRMIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Destination, Add, Print, Network, Unqualif.(or MIM/8200), Set:
n General: Log.Name=DV8150, IPAddr=accordingly n General: Database=unqualif., Model=8200, Memory=32 n Media Info: Media=35x43cm, 4438x5390, 5262, (Blue) n Media Info: Media=35x35cm, 4438x4414,4286, (Blue)
n Media Info: Media=11x14in, 3440x4438, 4310, (Blue) n DICOM Info: Protocol=DICOM 3.0, Service Class=Basic Grayscale Print n DICOM Info: Port=5040, AE Title=NER_8150, Counters=40, Timers=100 n Supported Items: Collation=On, Common Text=On, Tonescaling=On n Supported Items: Remote Image Deletion=On, Rotation=On n Interpolation: No Magnif=On, Bilinear=On, Replic=On, Cubic Spline=On n Interpolation: Cubic Convolution 2=On, Cubic Convolution 3=On n Format Types: Custom Formats=On, Row Symm.=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On n Formatting: Req.Size Scale=On, Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=7, Max Band per Page=7, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=4, Min Vert Sep=4 n Formatting: Trim Width when enabled=4, Trim Width when disabled=0 n Formatting: Pixel Pitch=25.5910 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.3
Kodak DirectView-DR 5100-DR 7100-DR 5000 Console Upgrade-DR 9000 Console Upgrade
DICOM Network
Kodak DryView 8150
Setup Manual for Kodak DR 5100/ 7100/5000 CU/9000 CU with LASER IMAGER Products
Author: [email protected], Edition: May ´05 35
n SCU: Density Space= On, Perception LUT =On n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7
8150 Setup: n on Configuration, System, Network: n Host Name=DV8150DRE, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configuration, DICOM SCP, Communications:
n Port=5040, Association Limit=12, Source Name=DICOM n on Configuration, Destination:
n AE Title: Log.Name=DV8150 n Media Types: Media=35x43cm, 4438x5390, 5262, Any n Media Types: Media=35x35cm, 4438x4414,4286, Any n Media Types: Media=11x14in, 3440x4438, 4310, Any n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On n Formatting: DICOM Annotation Box=On, Req.Image Size=On n Formatting: Req.Size Scale=On, Req.Size Mix Page=On n Formatting: Req.Size Mix Row=On, Trim=On, n Formatting: True Landscape=On, Rotation=On n Formatting: Minify/Crop=On, Tonescaling on Image Basis=On n Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0 n Formatting: Max Img Rows=0, Pixel Pitch=12.8000, Min Horiz Sep=2 n Formatting: Min Vert Sep=2, Trim Width Enabled=2 n Formatting: Trim Width Disabled=0, Maximum DMAX=3.10
n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify: n Negotiate Presentation LUT=No, Negotiate Color Print=No, n TFT Set Name=Wrkstn2a.w87 (Always=Y) n Contrast=1 (Always=N), Smoothing Type=5 (Always=N) n Dmin=0.00 (Always=N), Dmax=3.00 (Always=N) n Image Polarity=Normal (Always=N) n NeventReports=No (Always=Y), Warnings=Yes n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n 2mm Border=Yes, Film Clip Border=No, n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N) n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No, n Modality ID=No, Annotation Override=No, Density Patch=No n Image Resizing=Minify/Scale (Always=N), n Text Box Location=None, Source ID=dr
Setup Manual for Kodak DR 5100/ 7100/5000 CU/9000 CU with LASER IMAGER Products
Author: [email protected], Edition: May ´05 36
Kodak DirectView DR 5100 / 7100 / 5000 CU / 9000 CU via DICOM with Kodak Color Medical Imager 1000
Requirements: Kodak DR 5100 / 7100 v1.0.0, MIM (inside DR) v5.0.b21 Requirements: CMI-1000 v1.0.b8 (DRE=v1.0.b8, MIMCore=v2.0.b3) DR Setup, from Service Functions/Login/Exit to Desktop, into MIM Service: n on Configure, Network: n Computer Name=eg DRMIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Destination, Add, Print, Network, Qualified, MIM/8300, Set:
n General: Log.Name=8300, IPAddr=accordingly, Database=MIM/8300 n General: Model=8300, Memory=32 n Media Info: Media=8x10in, 2256x2676, 2596, (Blue) n DICOM Info: Protocol=DICOM 3.0, Service Class=Basic Grayscale Print n DICOM Info: Port=5040, AE Title=CMI1000, Counters=40, Timers=100 n Supported Items: Collation=On, Common Text=On, Tonescaling=On n Supported Items: Remote Image Deletion=On, Rotation=On n Interpolation: No Magnif=On, Bilinear=On, Replic=On, Cubic Spline=On n Interpolation: Cubic Convolution 2=On, Cubic Convolution 3=On n Format Types: Custom Formats=On, Slide Format=On, Row Symm.=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On n Formatting: Req.Size Scale=On, Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width when enabled=2, Trim Width when disabled=0 n Formatting: Pixel Pitch=11.9048 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3 n SCU: Density Space= On, Perception LUT=On n M952 Usage: Min H/V Mag=1, Max H/V Mag=16, Min Dmax 952=1.5
CMI-1000 Setup:
Kodak DirectView-DR 5100-DR 7100-DR 5000 Console Upgrade-DR 9000 Console Upgrade
DICOM Network
Kodak CMI 1000
Setup Manual for Kodak DR 5100/ 7100/5000 CU/9000 CU with LASER IMAGER Products
Author: [email protected], Edition: May ´05 37
at Local Panel, under Media, set A4 or Letter ie what inside Paper Tray (CMI-1000 sw considers only this field and uses it as A4 or Letter (Always=Y): at Local Panel, under Menu, Imager Setup: n Network Setup: n IPAddr=accordingly, Subnet Mask=accordingly, Gateway=accordingly n under More Settings: DICOM Port=5040 n Edit Host Name/AE Title=CMI1000 n Modality (SCU) Config (or after modality recognition): n Select Modality=accordingly, Modality Config.Assistant=Yes, Reset Config=No n Note: Color IQ settings used when images sent with Color DICOM SOP n under Image Quality, Color Image Quality: (no need to adjust, leave defaults)
n Match Monitor Colors=default ie sRGB Color Space Profile.icm n Adjust Color Tones=default ie Default_Contrast_100.icm
n Note: Grayscale IQ settings used when images sent with Grayscale DICOM SOP: n under Image Quality, Grayscale Image Quality:
n Contrast=7 (Always=Y) n TFT Set (From list)=Wrkstn2a.w87 (Always=Y) n Wet Contrast=0 (Always=N), Curve Shape=429 (Always=N) n under More Quality Settings: n Tonescaling=Presentation LUT (Always=N), n Image Dmax=220 (Always=N), Image Dmin=10 (Always=N) n Smoothing=11 (Always=Y), Polarity=Positive (Always=N) n Interpolation=CUBIC (Always=N), Trim=No (Always=N) n Page Orientation=PORTRAIT (Always=N), Negotiate PLUT=No
n under Modality Defaults: n Media Size=8.5x11 (Always=N), don’t care, this field plays no role n Image Resizing=Minify (Always=N), n Priority=Normal (Always=N), NeventReports=No (Always=Y), n Warnings=Yes, Color=Yes n (set Color=No when only b/w images are printed and set it to be sure n to apply to the b/w images the Greyscale Image Quality settings) n Page Annotation: n Hosp.Name=No, Modality ID=No, Page Nbr=No, Date=No, Time= No
n Save Changes and Exit
TENTATIVE Setup for Kodak workstation AutoRad NT with LASER IMAGER Products
Author: [email protected], Edition: May ´05 1
TENTATIVE Setup for Kodak workstation AutoRad NT with LASER IMAGERS Connection via DICOM: n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /
Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual and HQ)...... 2 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /
Kodak DryView 8500 LASER IMAGER / Plus (see also 8800/8500 Dual).................... 4 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /
Kodak DryView 8100 LASER IMAGER......................................................................... 6 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /
Kodak DryView 8300 LASER IMAGER......................................................................... 8 n Kodak Digital Science 190 MEDICAL LASER PRINTER......................................... 10 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /
Kodak Ektascan 2180 LASER PRINTER ....................................................................... 11 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /
Kodak Ektascan 1120 LASER PRINTER ....................................................................... 13 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /
Kodak Ektascan 160 LASER IMAGER .......................................................................... 15 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /
Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual and HQ) (1) . 17 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /
Kodak DryView 8500 LASER IMAGER / Plus (see also 8800/8500 Dual) (1)............... 19 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /
Kodak DryView 8100 LASER IMAGER (1).................................................................... 21 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /
Kodak DryView 8300 LASER IMAGER (1).................................................................... 23 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /
Kodak DryView 8200 LASER IMAGER (1).................................................................... 25 n Kodak DryView 8900 LASER IMAGER......................................................................... 27 n Kodak DryView 8150 LASER IMAGER......................................................................... 29 n Kodak Color Medical Imager 1000 ................................................................................. 31
1 setup valid also for Kodak PACS LINK 25 PRINT SERVER.
TENTATIVE Setup for Kodak workstation AutoRad NT with LASER IMAGER Products
Author: [email protected], Edition: May ´05 2
Kodak AutoRad NT via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /
Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual and HQ)
Kodak DryView 8700 PlusKodak 9410 PACS Link
DICOM Network
3M8700 DryView
Fiber Cable
Fiber Cable
Kodak AutoRad NT
Requirements: AutoRad NT v4.2, 9410 v1.6, 8700 v1.34 Note: This setup is basically also valid for 8800/8700 Dual and HQ cameras
by basically using the correspondent Model into 9410 Local Printers AutoRad Setup: n insert into file C:\WINNT\system32\drivers\etc\hosts: n IPaddress of 9410 Computer Name of 9410 e.g., plink n click Report Tool button n into menu Print film/Select Printer/New set: n Name=DV8700, Description=DV8700, AE=9410 n Host=Computer Name of 9410 e.g., plink, Port=1024 n Timeout=120, BitDepth=12 n Select Formats=click all formats n Set: 1x1=4096,5195, 1x2=4096,2594; 2x2=2048,2594, 2x3=2048,1727 n Set: 3x3=1365,1727, 3x4=1365,1294; 3x5=1365,1034, 4x4=1024, 1294 n Set: 4x5=1024,1034 n Click OK to return n Click Image Quality Calibration/Print Test Pattern to calibrate the printer n Measure densities and enter averaged values in Calibration table n Click OK to return and print a film to verify Calibration is done correctly n Note: Calibration must be redone at every printer service or TFT change
TENTATIVE Setup for Kodak workstation AutoRad NT with LASER IMAGER Products
Author: [email protected], Edition: May ´05 3
9410 Setup: n on Device Setup, LOCAL PRINTERS:
n Printer=8700, Model=8700, Output=Fiber n Baud=19200, Parity=None, Data=8, Stop=1, Command Set=Superset n Pixel=12, Header/Line, Timeout=60, Transfer Rate=2 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=5, Max.Density=300, Contrast=6, Border Density=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87
n on Device Setup, SCP PRINTERS, Current Providers: n Printer=8700, AE Title=9410, Port=1024, Max Associations=5
n on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle=accordingly, SCU IPAddr=accordingly, SCP=8700 n Copies=1, Contrast Table=9, TFT/ULUT=Pmsv3k.w87 n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=2 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0
8700 Plus Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=12, Header/Line, Parity=Enable Even, Port=0, Timeout=60
TENTATIVE Setup for Kodak workstation AutoRad NT with LASER IMAGER Products
Author: [email protected], Edition: May ´05 4
Kodak AutoRad NT via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /
Kodak DryView 8500 LASER IMAGER / Plus (see also 8800/8500 Dual)
Kodak DryView 8500 PlusKodak 9410 PACS Link
DICOM Network
3M8700 DryView
Fiber Cable
Fiber Cable
Kodak AutoRad NT
Requirements: AutoRad NT v4.2, 9410 v1.6, 8500 v1.34 Note: This setup is basically also valid for 8800/8500 Dual camera
by basically using the correspondent Model into 9410 Local Printers AutoRad Setup: n insert into file C:\WINNT\system32\drivers\etc\hosts: n IPaddress of 9410 Computer Name of 9410 e.g., plink n click Report Tool button n into menu Print film/Select Printer/New set: n Name=DV8500, Description=DV8500, AE=9410 n Host=Computer Name of 9410 e.g., plink, Port=1024 n Timeout=120, BitDepth=12 n Select Formats=click all formats n Set: 1x1=3380,4280, 1x2=3380,2132; 2x2=1690,2132, 2x3=1690,1420 n Set: 3x3=1126,1420, 3x4=1126,1060; 3x5=1126,848, 4x4=845,1060 n Set: 4x5=845,848 n Click OK to return n Click Image Quality Calibration/Print Test Pattern to calibrate the printer n Measure densities and enter averaged values in Calibration table n Click OK to return and print a film to verify Calibration is done correctly n Note: Calibration must be redone at every printer service or TFT change
TENTATIVE Setup for Kodak workstation AutoRad NT with LASER IMAGER Products
Author: [email protected], Edition: May ´05 5
9410 Setup: n on Device Setup, LOCAL PRINTERS:
n Printer=8500, Model=8500, Output=Fiber n Baud=19200, Parity=None, Data=8, Stop=1, Command Set=Superset n Pixel=12, Header/Line, Timeout=60, Transfer Rate=2 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=5, Max.Density=300, Contrast=6, Border Density=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87
n on Device Setup, SCP PRINTERS, Current Providers: n Printer=8500, AE Title=9410, Port=1024, Max Associations=5
n on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle=accordingly, SCU IPAddr=accordingly, SCP=8500 n Copies=1, Contrast Table=9, TFT/ULUT=Pmsv3k.w87 n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=2 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0
8500 Plus Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=12, Header/Line, Parity=Enable Even, Port=0, Timeout=60
TENTATIVE Setup for Kodak workstation AutoRad NT with LASER IMAGER Products
Author: [email protected], Edition: May ´05 6
Kodak AutoRad NT via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /
Kodak DryView 8100 LASER IMAGER
Kodak AutoRad NT
Kodak DryView 8100Kodak 9410 PACS Link
DICOM Network
COPCIL BoardCopper Cable Control 9-pin
Data 37-pin
RS4229-pole Plug
Requirements: AutoRad NT v4.2, 9410 v1.6, 8100 v2.4.1 AutoRad Setup: n insert into file C:\WINNT\system32\drivers\etc\hosts: n IPaddress of 9410 Computer Name of 9410 e.g., plink n click Report Tool button n into menu Print film/Select Printer/New set: n Name=DV8100, Description=DV8100, AE=9410 n Host=Computer Name of 9410 e.g., plink, Port=1024 n Timeout=120, BitDepth=12 n Select Formats=click all formats n Select Formats=click all formats n Set: 1x1=4096,5195, 1x2=4096,2594; 2x2=2048,2594, 2x3=2048,1727 n Set: 3x3=1365,1727, 3x4=1365,1294; 3x5=1365,1034, 4x4=1024, 1294 n Set: 4x5=1024,1034 n Click OK to return n Click Image Quality Calibration/Print Test Pattern to calibrate the printer n Measure densities and enter averaged values in Calibration table n Click OK to return and print a film to verify Calibration is done correctly n Note: Calibration must be redone at every printer service or TFT change
TENTATIVE Setup for Kodak workstation AutoRad NT with LASER IMAGER Products
Author: [email protected], Edition: May ´05 7
9410 Setup: on Device Setup, LOCAL PRINTERS:
n Printer=8100, Model=8100 4096 pxls/line, Output=Copper n Baud=1200, Parity=Even, Data=8, Stop=1, Command Set=952 n Pixel=12, Header/Line, Timeout=60, Transfer Rate=1 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=5, Max.Density=300, Contrast=6, Border Density=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87
on Device Setup, SCP PRINTERS, Current Providers: n Printer=8100, AE Title=9410, Port=1024, Max Associations=5
on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle=accordingly, SCU IPAddr=accordingly n SCP=8100, Copies=1, Contrast Table=9, TFT/ULUT=Pmsb.w87 n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=2 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0 8100 Setup on CONFIGURATION Menu: n on SIB board (i.e., external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=60, P1,…,P6=0
n on IMAGE QLTY-> Mag Scaling=Off, Pixel Correct=Off, 952 Override=Off n on IMAGE QUALITY-> TFT FILES: TFT=ver693c0.w87 n on LOCAL PANEL: Contrast=6, Density=3.00 n on SYSTEM Menu: Acquire=Digital, Max.Img.Columns=4361 n on DIGITAL Menu: Pixel Depth=12, Header/Line, Parity=Even
TENTATIVE Setup for Kodak workstation AutoRad NT with LASER IMAGER Products
Author: [email protected], Edition: May ´05 8
Kodak AutoRad NT via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /
Kodak DryView 8300 LASER IMAGER
Kodak DryView 8300Kodak 9410 PACS Link
DICOM Network
Control 9 pin
Data 37 pin
COPCIL board Copper Cable
Kodak AutoRad NT
Requirements: AutoRad NT v4.2, 9410 v1.6, 8300 v4.9.1, 8300 LUT v3.0.3B AutoRad Setup: n insert into file C:\WINNT\system32\drivers\etc\hosts: n IPaddress of 9410 Computer Name of 9410 e.g., plink n click Report Tool button n into menu Print film/Select Printer/New set: n Name=DV8100, Description=DV8100, AE=9410 n Host=Computer Name of MIM200 e.g., plink, Port=1024 n Timeout=120, BitDepth=8 n Select Formats=click only formats n 1x1=2256,2676, 1x2=2256,1326; 2x2=1116,1326, 2x3=1116,879 n Click OK to return n Click Image Quality Calibration/Print Test Pattern to calibrate the printer n Measure densities and enter averaged values in Calibration table n Click OK to return and print a film to verify Calibration is done correctly n Note: Calibration must be redone at every printer service or TFT change
TENTATIVE Setup for Kodak workstation AutoRad NT with LASER IMAGER Products
Author: [email protected], Edition: May ´05 9
9410 Setup: n on Device Setup, LOCAL PRINTERS:
n Printer=8300, Model=8300 Copper, Output=Copper n Command Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Pixel=8, Header/Line, Timeout=60, Transfer Rate=1 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=0, Max.Density=300, Contrast=6, Border Density=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT= upmsv3k.w8u
n on Device Setup, SCP PRINTERS, Current Providers: n Printer=8300, AE Title=9410, Port=1024, Max Associations=5 n on Device Setup, SCP PRINTERS, Registered Users:
n SCU AETitle=accordingly, SCU IPAddr=accordingly n SCP=8300, Copies=1, Contrast Table=10, TFT/ULUT=u1_109b.w8u n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=0 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0
8300 Setup: n on Operator Menu set: D=16, C=6, Sharp/Smooth=0 i.e., Auto n on Operator Menu set: Film Layout: 1 on 1=Portrait n on Service Menu set: Ratio=1.00, Serial=1200,8,1,Even,Comma,3M, Memory=16 n on Service Menu set: Digital Interface: Parity=Even, Modality Group=1
TENTATIVE Setup for Kodak workstation AutoRad NT with LASER IMAGER Products
Author: [email protected], Edition: May ´05 10
Kodak AutoRad NT via DICOM with Kodak Digital Science 190 MEDICAL LASER PRINTER
DICOM Network
Kodak 190 cameraKodak AutoRad NT
Requirements: AutoRad NT v4.2, 190 rel. 1.7.29 AutoRad Setup: n insert into file C:\WINNT\system32\drivers\etc\hosts: n IPaddress of MLP190 Computer Name of 190 e.g., mlp n click Report Tool button n into menu Print film/Select Printer/New set: n Name=K190, Description=K190, AE=190 n Host=Computer Name of MIM200 e.g., mim, Port=5040 n Timeout=120, BitDepth=12 n Select Formats=click all formats n Click OK to return n Click Image Quality Calibration/Print Test Pattern to calibrate the printer n Measure densities and enter averaged values in Calibration table n Click OK to return and print a film to verify Calibration is done correctly n Note: Calibration must be redone at every printer service or TFT change 190 Setup: n On 190 Control Panel press Menu, Setup: n Printer Density=3.00, Curve Shape=3.0, Contrast=0, Contrast Pivot Density=1.2 n IPAddress=accordingly, Subnet Mask=accordingly, Gateway Address=accordingly n Port=5040, Network Node Name=mlp, Connection Type=RJ45
TENTATIVE Setup for Kodak workstation AutoRad NT with LASER IMAGER Products
Author: [email protected], Edition: May ´05 11
Kodak AutoRad NT via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /
Kodak Ektascan 2180 LASER PRINTER
Kodak MIM 200
DICOM Network
Fiber Cable
Kodak 2180 cameraKodak AutoRad NT
Requirements: AutoRad NT v4.2, MIM200 v6.1, 2180 v2.17H AutoRad Setup: n insert into file C:\WINNT\system32\drivers\etc\hosts: n IPaddress of MIM200 Computer Name of MIM200 e.g., mim n click Report Tool button n into menu Print film/Select Printer/New set: n Name=K2180, Description=K2180, AE=2180 n Host=Computer Name of MIM200 e.g., mim, Port=5040 n Timeout=120, BitDepth=12 n Select Formats=click all formats n Click OK to return n Click Image Quality Calibration/Print Test Pattern to calibrate the printer n Measure densities and enter averaged values in Calibration table n Click OK to return and print a film to verify Calibration is done correctly n Note: Calibration must be redone at every printer service or TFT change MIM200 Setup: n on Configure, Network: n Computer Name=mim, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, KELP 2180, Set:
n General: Log.Name=KELP2180, Database Name=KELP 2180 n General: Model=KELP 2180, Memory=24, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4136x5160, 5030, (Blue) n Media Info:Media=35x35cm,4136x4136,4006, (Blue) n Media Info: Media=11x14in, 3240x4136, 4006, (Blue) n Media Info: Media=8x10in, 2290x2840, 2710, (Blue) n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On
TENTATIVE Setup for Kodak workstation AutoRad NT with LASER IMAGER Products
Author: [email protected], Edition: May ´05 12
n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=2 n Formatting: Pixel Pitch=12.6582 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7
n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape=3 i.e., 435 (Always=Y), Contrast (wet)=0 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Interpolation=Cubic, n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Film Output Dest=Bin 9 (Always=N) n Negotiate Color Print=Off
2180 Setup: n Optical Interface board will automatic configure into 2180, no setup needed
TENTATIVE Setup for Kodak workstation AutoRad NT with LASER IMAGER Products
Author: [email protected], Edition: May ´05 13
Kodak AutoRad NT via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /
Kodak Ektascan 1120 LASER PRINTER
Kodak MIM 200
DICOM Network
Fiber Cable
Kodak 1120 cameraKodak AutoRad NT
Requirements: AutoRad NT v4.2, MIM200 v6.1, 1120 v2.40/032 AutoRad Setup: n insert into file C:\WINNT\system32\drivers\etc\hosts: n IPaddress of MIM200 Computer Name of MIM200 e.g., mim n click Report Tool button n into menu Print film/Select Printer/New set: n Name=K1120, Description=K1120, AE=1120 n Host=Computer Name of MIM200 e.g., mim, Port=5040 n Timeout=120, BitDepth=12 n Select Formats=click all formats n Click OK to return n Click Image Quality Calibration/Print Test Pattern to calibrate the printer n Measure densities and enter averaged values in Calibration table n Click OK to return and print a film to verify Calibration is done correctly n Note: Calibration must be redone at every printer service or TFT change MIM200 Setup: n on Configure, Network: n Computer Name=mim, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, KELP 1120, Set:
n General: Log.Name=KELP1120, Database Name=KELP 1120 n General: Model=KELP 1120, Memory=20, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4096x5132, 5034, (Blue) n Media Info: Media=35x35cm, 4096x4108, 4010, (Blue) n Media Info: Media=11x14in, 4096x3232, 3134, (Blue) n Media Info: Media=8x10in, 2304x2900, 2802, (Blue) n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On
TENTATIVE Setup for Kodak workstation AutoRad NT with LASER IMAGER Products
Author: [email protected], Edition: May ´05 14
n Interpolation: NoMag=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=3, Min Vert Sep=0 n Formatting: Trim Width Enabled=0, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.5 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=2.8 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7
n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape=3 i.e., 435 (Always=Y), Contrast (wet)=0 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Interpolation=Cubic, n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off
1120 Setup: n Optical Interface board will automatic configure into 1120, no setup needed
TENTATIVE Setup for Kodak workstation AutoRad NT with LASER IMAGER Products
Author: [email protected], Edition: May ´05 15
Kodak AutoRad NT via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /
Kodak Ektascan 160 LASER IMAGER
Kodak MIM 200
DICOM Network
CrossedNetwork Cable
Kodak 160 cameraKodak AutoRad NT
Requirements: AutoRad NT v4.2, MIM 200 v6.1, KELI 160 v7.2 AutoRad Setup: n insert into file C:\WINNT\system32\drivers\etc\hosts: n IPaddress of MIM200 Computer Name of MIM200 e.g., mim n click Report Tool button n into menu Print film/Select Printer/New set: n Name=K160, Description=K160, AE=160 n Host=Computer Name of MIM200 e.g., mim, Port=5040 n Timeout=120, BitDepth=12 n Select Formats=click all formats n Click OK to return n Click Image Quality Calibration/Print Test Pattern to calibrate the printer n Measure densities and enter averaged values in Calibration table n Click OK to return and print a film to verify Calibration is done correctly n Note: Calibration must be redone at every printer service or TFT change MIM200 Setup: n on Configure, Network: n Computer Name=mim, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, KELI 160, Set:
n General: Log.Name=KELI 160, IPAddr=100.100.100.30, n General: Database Name=KELI 160, Model=KELI 160 n Media Info: Media=35x43cm, 4361x5348, 5228, Any (Blue,Clear) n Supported Item: Collation=On, Text=On, Tonescaling on Image=On n Supported Item: Pivot Density=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On
TENTATIVE Setup for Kodak workstation AutoRad NT with LASER IMAGER Products
Author: [email protected], Edition: May ´05 16
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7
n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape=3 i.e., 435 (Always=N), Contrast (wet)=0 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Interpolation=Cubic, n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off
160 Setup: no modality-specific setup needed
TENTATIVE Setup for Kodak workstation AutoRad NT with LASER IMAGER Products
Author: [email protected], Edition: May ´05 17
Kodak AutoRad NT via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /
Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual and HQ)
Kodak DryView 8700 Plus
DICOM Network
3M8700 DryView
Fiber Cable
Fiber Cable
Kodak MIM 200
Kodak AutoRad NT
Requirements: AutoRad NT v4.2, MIM200 v6.1, 8700 v1.34 Note: This setup is basically also valid for 25 PS computer Note: This setup is basically also valid for 8800/8700 Dual and HQ cameras
by basically using the correspondent Model into MIM200 Destination AutoRad Setup: n insert into file C:\WINNT\system32\drivers\etc\hosts: n IPaddress of MIM200 Computer Name of MIM200 e.g., mim n click Report Tool button n into menu Print film/Select Printer/New set: n Name=DV8700, Description=DV8700, AE=8700 n Host=Computer Name of MIM200 e.g., mim, Port=5040 n Timeout=120, BitDepth=12 n Select Formats=click all formats n Select Formats=click all formats n Set: 1x1=4096,5195, 1x2=4096,2594; 2x2=2048,2594, 2x3=2048,1727 n Set: 3x3=1365,1727, 3x4=1365,1294; 3x5=1365,1034, 4x4=1024, 1294 n Set: 4x5=1024,1034 n Click OK to return n Click Image Quality Calibration/Print Test Pattern to calibrate the printer n Measure densities and enter averaged values in Calibration table n Click OK to return and print a film to verify Calibration is done correctly n Note: Calibration must be redone at every printer service or TFT change
TENTATIVE Setup for Kodak workstation AutoRad NT with LASER IMAGER Products
Author: [email protected], Edition: May ´05 18
MIM200 Setup: n on Configure, Network:
n Node Name=mim, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, 8700, Set: n General: Log.Name=8700 n General: Database Name=8700, Model=8700, Memory=32 n Media Info: Media=35x43cm, 4096x5223, 5133, Blue n Output Params: Cmd=SuperSet,Baud=19200,Data=8,Stop=1,Parity=None n Output Params: Pixel=12, Header/Line, Transfer=2000 KHz, Acq=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7
n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=Pmsv3k.w87 (Always=Y), Contrast (dry)=9 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=2 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off
8700 Plus Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=12, Header/Line, Port=0, Parity=Disable Even, Timeout=60
TENTATIVE Setup for Kodak workstation AutoRad NT with LASER IMAGER Products
Author: [email protected], Edition: May ´05 19
Kodak AutoRad NT via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /
Kodak DryView 8500 LASER IMAGER / Plus (see also 8800/8500 Dual)
Kodak DryView 8500 Plus
DICOM Network
3M8700 DryView
Fiber Cable
Fiber Cable
Kodak MIM 200
Kodak AutoRad NT
Requirements: AutoRad NT v4.2, MIM200 v6.1, 8500 v1.34 Note: This setup is basically also valid for 25 PS computer Note: This setup is basically also valid for 8800/8500 Dual camera
by basically using the correspondent Model into MIM200 Destination AutoRad Setup: n insert into file C:\WINNT\system32\drivers\etc\hosts: n IPaddress of MIM200 Computer Name of MIM200 e.g., mim n click Report Tool button n into menu Print film/Select Printer/New set: n Name=DV8500, Description=DV8500, AE=8500 n Host=Computer Name of MIM200 e.g., mim, Port=5040 n Timeout=120, BitDepth=12 n Select Formats=click all formats n Set: 1x1=3380,4280, 1x2=3380,2132; 2x2=1690,2132, 2x3=1690,1420 n Set: 3x3=1126,1420, 3x4=1126,1060; 3x5=1126,848, 4x4=845,1060 n Set: 4x5=845,848 n Click OK to return n Click Image Quality Calibration/Print Test Pattern to calibrate the printer n Measure densities and enter averaged values in Calibration table n Click OK to return and print a film to verify Calibration is done correctly n Note: Calibration must be redone at every printer service or TFT change
TENTATIVE Setup for Kodak workstation AutoRad NT with LASER IMAGER Products
Author: [email protected], Edition: May ´05 20
MIM200 Setup: n on Configure, Network:
n Node Name=mim, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, 8500, Set: n General: Log.Name=8500 n General: Database Name=8500, Model=8500, Memory=32 n Media Info: Media=11x14in, 3388x4283, 4193, Blue n Output Params: Cmd=SuperSet,Baud=19200,Data=8,Stop=1,Parity=None n Output Params: Pixel=12, Header/Line, Transfer=2000 KHz, Acq=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=6 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7
n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=Pmsv3k.w87 (Always=Y), Contrast (dry)=9 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=2 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=11INx14IN (Always=N), Negotiate Color Print=Off
8500 Plus Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=12, Header/Line, Port=0, Parity=Disable Even, Timeout=60
TENTATIVE Setup for Kodak workstation AutoRad NT with LASER IMAGER Products
Author: [email protected], Edition: May ´05 21
Kodak AutoRad NT via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /
Kodak DryView 8100 LASER IMAGER
Kodak DryView 8100
DICOM Network
COPCIL BoardCopper Cable Control 9-pin
Data 37-pin
RS4229-pole Plug
Kodak MIM 200
Kodak AutoRad NT
Requirements: AutoRad NT v4.2, MIM200 v6.1, 8100 v2.4.1 Note: This setup is basically also valid for 25 PS computer AutoRad Setup: n insert into file C:\WINNT\system32\drivers\etc\hosts: n IPaddress of MIM200 Computer Name of MIM200 e.g., mim n click Report Tool button n into menu Print film/Select Printer/New set: n Name=DV8100, Description=DV8100, AE=8100 n Host=Computer Name of MIM200 e.g., mim, Port=5040 n Timeout=120, BitDepth=12 n Select Formats=click all formats n Select Formats=click all formats n Set: 1x1=4096,5195, 1x2=4096,2594; 2x2=2048,2594, 2x3=2048,1727 n Set: 3x3=1365,1727, 3x4=1365,1294; 3x5=1365,1034, 4x4=1024, 1294 n Set: 4x5=1024,1034 n Click OK to return n Click Image Quality Calibration/Print Test Pattern to calibrate the printer n Measure densities and enter averaged values in Calibration table n Click OK to return and print a film to verify Calibration is done correctly n Note: Calibration must be redone at every printer service or TFT change MIM200 Setup: n on Configure, Network: n Node Name=mim, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8100, Set:
n General: Log.Name=8100 n General: Database Name=8100, Model=8100, Memory=32
TENTATIVE Setup for Kodak workstation AutoRad NT with LASER IMAGER Products
Author: [email protected], Edition: May ´05 22
n Media Info: Media=35x43cm, 4096x5223, 5133, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=12, Header/Line, Transfer=1000 KHz, Acquire=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7
n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=pmsb.w87 (Always=Y), Contrast (dry)=9 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=2 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off
8100 Setup on CONFIGURATION Menu: n on SIB board (i.e., external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=90, P1,…,P6=0
n on IMAGE QLTY-> Mag Scaling=Off, Pixel Correct=Off, 952 Override=Off n on IMAGE QUALITY-> TFT FILES Menu: TFT=Ver693c0.w87 n on LOCAL PANEL Menu: Contrast=6, Density=3.00 n on SYSTEM Menu: Acquire=Digital, Max.Img.Columns=4361 n on DIGITAL Menu: Pixel Depth=12, Header/Line, Parity=Even
TENTATIVE Setup for Kodak workstation AutoRad NT with LASER IMAGER Products
Author: [email protected], Edition: May ´05 23
Kodak AutoRad NT via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /
Kodak DryView 8300 LASER IMAGER
Kodak DryView 8300
DICOM Network
Control 9 pin
Data 37 pin
COPCIL board Copper Cable
Kodak MIM 200
Kodak AutoRad NT
Requirements: AutoRad NT v4.2, MIM200 v6.1, 8300 v4.9.1, 8300 LUT v3.0.3B Note: This setup is basically also valid for 25 PS computer AutoRad Setup: n insert into file C:\WINNT\system32\drivers\etc\hosts: n IPaddress of MIM200 Computer Name of MIM200 e.g., mim n click Report Tool button n into menu Print film/Select Printer/New set: n Name=DV8300, Description=DV8300, AE=8300 n Host=Computer Name of MIM200 e.g., mim, Port=5040 n Timeout=120, BitDepth=8 n Select Formats=click only formats n 1x1=2256,2676, 1x2=2256,1326; 2x2=1116,1326, 2x3=1116,879 n Click OK to return n Click Image Quality Calibration/Print Test Pattern to calibrate the printer n Measure densities and enter averaged values in Calibration table n Click OK to return and print a film to verify Calibration is done correctly n Note: Calibration must be redone at every printer service or TFT change MIM200 Setup: n on Configure, Network:
n Node Name=mim, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, 8300, Set: n General: Log.Name=8300 n General: Database Name=8300, Model=8300, Memory=32 n Media Info: Media=8x10in, 2256x2676, 2596, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=8, Header/Line, Transfer=2000 KHz, Acquire=60
TENTATIVE Setup for Kodak workstation AutoRad NT with LASER IMAGER Products
Author: [email protected], Edition: May ´05 24
n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On, SuperSlide=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=11.811 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3 n M952 Usage: Min H/V Mag=1, Max H/V Mag=16, Min Dmax 952=1.5
n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=u1_109b.w8u (Always=Y), Contrast (dry)=10 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=2 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=8INx10IN (Always=N), Negotiate Color Print=Off
8300 Setup: n on Operator Menu set: D=16, C=6, Sharp/Smooth=0 i.e., Auto n on Operator Menu set: Film Layout: 1 on 1=Portrait n on Service Menu set: Ratio=1.00, Serial=1200,8,1,Even,Comma,3M, Memory=16 n on Service Menu set: Digital Interface: Parity=Even, Modality Group=1
TENTATIVE Setup for Kodak workstation AutoRad NT with LASER IMAGER Products
Author: [email protected], Edition: May ´05 25
Kodak AutoRad NT via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /
Kodak DryView 8200 LASER IMAGER
Kodak MIM 200
DICOM Network
CrossedNetwork Cable
Kodak DryView 8200
Kodak AutoRad NT
Requirements: AutoRad NT v4.2, MIM200 v6.1, 8200 v3.5 Note: This setup is basically also valid for 25 PS computer AutoRad Setup: n insert into file C:\WINNT\system32\drivers\etc\hosts: n IPaddress of MIM200 Computer Name of MIM200 e.g., mim n click Report Tool button n into menu Print film/Select Printer/New set: n Name=DV8200, Description=DV8200, AE=8200 n Host=Computer Name of MIM200 e.g., mim, Port=5040 n Timeout=120, BitDepth=12 n Select Formats=click all formats n Select Formats=click all formats n Set: 1x1=4096,5195, 1x2=4096,2594; 2x2=2048,2594, 2x3=2048,1727 n Set: 3x3=1365,1727, 3x4=1365,1294; 3x5=1365,1034, 4x4=1024, 1294 n Set: 4x5=1024,1034 n Click OK to return n Click Image Quality Calibration/Print Test Pattern to calibrate the printer n Measure densities and enter averaged values in Calibration table n Click OK to return and print a film to verify Calibration is done correctly n Note: Calibration must be redone at every printer service or TFT change MIM200 Setup: n on Configure, Network: n Node Name=mim, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8200, Set: n General: Log.Name=8200, IPAddr=100.100.100.40, n General: Database Name=8200, Model=8200, Memory=32
TENTATIVE Setup for Kodak workstation AutoRad NT with LASER IMAGER Products
Author: [email protected], Edition: May ´05 26
n Media Info: Media=35x43cm, 4361x5223, 5133, Any (Blue,Clear) n Media Info: Media=35x35cm, 4361x4247, 4157, Any (Blue,Clear) n Media Info: Media=11x14in, 3272x4361, 4271, Any (Blue,Clear) n Supported Item: Collation=On, Common Text=On, Tonescaling=On n Supported Item: Remote Image Deletion=On, Rotation=On n Interpolation: No Magnification=On, Bilin=On, Repl=On n Interpolation: Cubic Spline=On, Cubic Convolution 2=On n Format Types: Custom=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n SCU: Density Space=On, Variable Border=On, PLUT Service=On n SCU: Curve Shape Tonescaling=On, Perception LUT Tonescaling=On n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=Pmsb.w87 (Always=Y), Contrast (dry)=9 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=2 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off 8200 Setup on CONFIGURATION Menu: n on IMAGE QUALITY-> TFT FILES Menu: TFT=Ver693c0.w87 n on LOCAL PANEL Menu: Contrast=6, Density=3.00 n on DICOM Menu: SCU Config.: AE=mim, TFT=VER693C0, C=6, Smoothing=0 n on DICOM Menu: DICOM Config.: AE=NER_ANY, Port=1025
TENTATIVE Setup for Kodak workstation AutoRad NT with LASER IMAGER Products
Author: [email protected], Edition: May ´05 27
Kodak AutoRad NT via DICOM with Kodak DryView 8900 LASER IMAGER
Requirements: AutoRad NT v4.2 Requirements: 8900 rev.E ie rel.2.11 (ie DRE v2.11, MIM v5.6.b5, MCS v2.10) AutoRad Setup: n insert into file C:\WINNT\system32\drivers\etc\hosts: n IPaddress of 8900 Computer Name of 8900 eg DV8900 n click Report Tool button n into menu Print film/Select Printer/New set: n Name=DV8900, Description=DV8900, AE=8900 n Host=Computer Name of 8900 eg DV8900, Port=5040 n Timeout=120, BitDepth=12 n Select Formats=click all formats n Select Formats=click all formats n Set: 1x1=4096,5195, 1x2=4096,2594; 2x2=2048,2594, 2x3=2048,1727 n Set: 3x3=1365,1727, 3x4=1365,1294; 3x5=1365,1034, 4x4=1024, 1294 n Set: 4x5=1024,1034 n Click OK to return n Click Image Quality Calibration/Print Test Pattern to calibrate the printer n Measure densities and enter averaged values in Calibration table n Click OK to return and print a film to verify Calibration is done correctly n Note: Calibration must be redone at every printer service or TFT change 8900 Setup: n on Configuration, System, Network: n Host Name=DV8900, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configuration, DICOM SCP, Communications:
n Port=5040, Association Limit=12, Source Name=DICOM n on Configuration, Destination:
n General: Log.Name=8900 n Media Types: Media=35x43cm, 9100x11037, 10781, Any n Media Types: Media=35x35cm,9100x9087, 8831, Any n Media Types: Media=11x14in, 7137x9100, 8844, Any
Kodak AutoRad NT
DICOM Network
Kodak DryView 8900
TENTATIVE Setup for Kodak workstation AutoRad NT with LASER IMAGER Products
Author: [email protected], Edition: May ´05 28
n Media Types: Media=10x12in, 6490x7767, 7511, Any n Media Types: Media=8x10in, 5167x6490, 6234, Any
n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On n Formatting: DICOM Annotation Box=On, Req.Image Size=On n Formatting: Req.Size Scale=On, Req.Size Mix Page=On n Formatting: Req.Size Mix Row=On, Trim=On, n Formatting: True Landscape=On, Rotation=On n Formatting: Minify/Crop=On, Tonescaling on Image Basis=On n Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0 n Formatting: Max Img Rows=0, Pixel Pitch=25.5910, Min Horiz Sep=4 n Formatting: Min Vert Sep=4, Trim Width Enabled=4 n Formatting: Trim Width Disabled=0, Maximum DMAX=3.30
n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify: n Negotiate Presentation LUT=No, Negotiate Color Print=No n TFT= Pmsv3k.w87 (Always=N), Contrast=9 (Always=N) n Smoothing Type=2 (Always=N), Image Polarity=Normal (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=No (Always=Y), Warnings=Yes n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n 2mm Border=Yes, Film Clip Border=No, Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Sorter Bin=Bin1 (Always=N) n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No n Modality ID=No, Annotation Override=No, Density Patch=No n Image Resizing=Minify/Scale (Always=N), n Text Box Location=None, Source ID=ws
TENTATIVE Setup for Kodak workstation AutoRad NT with LASER IMAGER Products
Author: [email protected], Edition: May ´05 29
Kodak AutoRad NT via DICOM with Kodak DryView 8150 LASER IMAGER
Requirements: AutoRad NT v4.2 Requirements: 8150 v0.08.b6 (DRE=DV8150_DRE_0.08.b6, MIM=MIM_v5.7.b6) AutoRad Setup: n insert into file C:\WINNT\system32\drivers\etc\hosts: n IPaddress of 8150 Computer Name of 8150 eg DV8150DRE n click Report Tool button n into menu Print film/Select Printer/New set: n Name=DV8150, Description=DV8150, AE=DV8150 n Host=Computer Name of 8150 eg DV8150DRE, Port=5040 n Timeout=120, BitDepth=12 n Select Formats=click all formats n Select Formats=click all formats n Set: 1x1=4096,5195, 1x2=4096,2594; 2x2=2048,2594, 2x3=2048,1727 n Set: 3x3=1365,1727, 3x4=1365,1294; 3x5=1365,1034, 4x4=1024, 1294 n Set: 4x5=1024,1034 n Click OK to return n Click Image Quality Calibration/Print Test Pattern to calibrate the printer n Measure densities and enter averaged values in Calibration table n Click OK to return and print a film to verify Calibration is done correctly n Note: Calibration must be redone at every printer service or TFT change 8150 Setup: n on Configuration, System, Network: n Host Name=DV8150DRE, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configuration, DICOM SCP, Communications:
n Port=5040, Association Limit=12, Source Name=DICOM n on Configuration, Destination:
n AE Title: Log.Name=DV8150 n Media Types: Media=35x43cm, 4438x5390, 5262, Any n Media Types: Media=35x35cm, 4438x4414,4286, Any
Kodak AutoRad NT
DICOM Network
Kodak DryView 8150
TENTATIVE Setup for Kodak workstation AutoRad NT with LASER IMAGER Products
Author: [email protected], Edition: May ´05 30
n Media Types: Media=11x14in, 3440x4438, 4310, Any n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On n Formatting: DICOM Annotation Box=On, Req.Image Size=On n Formatting: Req.Size Scale=On, Req.Size Mix Page=On n Formatting: Req.Size Mix Row=On, Trim=On, n Formatting: True Landscape=On, Rotation=On n Formatting: Minify/Crop=On, Tonescaling on Image Basis=On n Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0 n Formatting: Max Img Rows=0, Pixel Pitch=12.8000, Min Horiz Sep=2 n Formatting: Min Vert Sep=2, Trim Width Enabled=2 n Formatting: Trim Width Disabled=0, Maximum DMAX=3.10
n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify: n Negotiate Presentation LUT=No, Negotiate Color Print=No, n TFT Set Name=Pmsb.w87 (Always=Y) n Contrast=9 (Always=N), Smoothing Type=2 (Always=N) n Dmin=0.00 (Always=N), Dmax=3.00 (Always=N) n Image Polarity=Normal (Always=N) n NeventReports=No (Always=Y), Warnings=Yes n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n 2mm Border=Yes, Film Clip Border=No, n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N) n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No, n Modality ID=No, Annotation Override=No, Density Patch=No n Image Resizing=Minify/Scale (Always=N), n Text Box Location=None, Source ID=ws
TENTATIVE Setup for Kodak workstation AutoRad NT with LASER IMAGER Products
Author: [email protected], Edition: May ´05 31
Kodak AutoRad NT via DICOM with Kodak Color Medical Imager 1000
Requirements: AutoRad NT v4.2 Requirements: CMI-1000 v1.0.b8 (DRE=v1.0.b8, MIMCore=v2.0.b3) AutoRad Setup: n insert into file C:\WINNT\system32\drivers\etc\hosts: n IPaddress of CMI1000 Computer Name of CMI1000 eg CMI1000 n click Report Tool button n into menu Print film/Select Printer/New set: n Name=CMI1000, Description=CMI1000, AE=CMI1000 n Host=Computer Name of CMI1000 eg CMI1000, Port=5040 n Timeout=120, BitDepth=8 n Select Formats=click only formats n 1x1=2508,2954, 1x2=2508,1477; 2x2=1254,1477, 2x3=1254,984 n Click OK to return n Click Image Quality Calibration/Print Test Pattern to calibrate the printer n Measure densities and enter averaged values in Calibration table n Click OK to return and print a film to verify Calibration is done correctly n Note: Calibration must be redone at every printer service or TFT change CMI-1000 Setup: at Local Panel, under Media, set A4 or Letter ie what inside Paper Tray (CMI-1000 sw considers only this field and uses it as A4 or Letter (Always=Y): at Local Panel, under Menu, Imager Setup: n Network Setup: n IPAddr=accordingly, Subnet Mask=accordingly, Gateway=accordingly n under More Settings: DICOM Port=5040 n Edit Host Name/AE Title=CMI1000 n Modality (SCU) Config (or after modality recognition): n Select Modality=accordingly, Modality Config.Assistant=Yes, Reset Config=No n Note: Color IQ settings used when images sent with Color DICOM SOP n under Image Quality, Color Image Quality: (no need to adjust, leave defaults)
n Match Monitor Colors=default ie sRGB Color Space Profile.icm n Adjust Color Tones=default ie Default_Contrast_100.icm
n Note: Grayscale IQ settings used when images sent with Grayscale DICOM SOP:
Kodak AutoRad NT
DICOM Network
Kodak CMI 1000
TENTATIVE Setup for Kodak workstation AutoRad NT with LASER IMAGER Products
Author: [email protected], Edition: May ´05 32
n under Image Quality, Grayscale Image Quality: n Contrast=9 (Always=Y), TFT Set (From list)=Pmsv3k.w87 (Always=Y) n Wet Contrast=0 (Always=N), Curve Shape=429 (Always=N) n under More Quality Settings: n Tonescaling=Presentation LUT (Always=N), n Image Dmax=220 (Always=N), Image Dmin=10 (Always=N) n Smoothing=2 (Always=Y), Polarity=Positive (Always=N) n Interpolation=CUBIC (Always=N), Trim=No (Always=N) n Page Orientation=PORTRAIT (Always=N), Negotiate PLUT=No
n under Modality Defaults: n Media Size=8.5x11 (Always=N), don’t care, this field plays no role n Image Resizing=Minify (Always=N), n Priority=Normal (Always=N), NeventReports=No (Always=Y), n Warnings=Yes, Color=Yes n (set Color=No when only b/w images are printed and set it to be sure n to apply to the b/w images the Greyscale Image Quality settings) n Page Annotation: n Hosp.Name=No, Modality ID=No, Page Nbr=No, Date=No, Time= No
n Save Changes and Exit
Kodak workstation MasterPage with LASER IMAGER Products
Author: [email protected], Edition: May ´05 1
Tentative Setup Manual for Kodak workstation MasterPage with LASER IMAGERS Connection via DICOM: n Kodak DryView 8300 LASER IMAGER......................................................................... 2 n Kodak Digital Science 190 MEDICAL LASER PRINTER......................................... 3 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /
Kodak DryView 8500 LASER IMAGER / Plus (see also 8800/8500 Dual).................... 4 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /
Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual).................... 6 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /
Kodak DryView 8100 LASER IMAGER......................................................................... 8 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /
Kodak DryView 8300 LASER IMAGER......................................................................... 10 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /
Kodak DryView 8610 LASER IMAGING SYSTEM / for Mammography (see also 8600) ................................................................................................................. 12
n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak Digital Science 969 HQ LASER IMAGER...................................................... 14
n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 160 LASER IMAGER .......................................................................... 16
n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 2180 LASER PRINTER ....................................................................... 18
n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 1120 LASER PRINTER ....................................................................... 20
n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 (1) / Kodak DryView 8200 LASER IMAGER......................................................................... 22
n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 (1) / Kodak DryView 8500 LASER IMAGER / Plus (see also 8800/8500 Dual) ...................... 24
n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 (1) / Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual).................... 26
n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 (1) / Kodak DryView 8100 LASER IMAGER......................................................................... 28
n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 (1) / Kodak DryView 8300 LASER IMAGER......................................................................... 30
n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 (1) / Kodak DryView 8610 LASER IMAGING SYSTEM / for Mammography (see also 8600) ................................ ................................ ................................ ................................ ...... 32
n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 (1) / Kodak Digital Science 969 HQ LASER IMAGER ................................ ............................... 34
n Kodak DryView 8900 LASER IMAGER......................................................................... 36 n Kodak DryView 8150 LASER IMAGER......................................................................... 38 n Kodak Color Medical Imager 1000 ................................................................................. 40
1 Setup valid also for Kodak PACS LINK 25 PRINT SERVER.
Kodak workstation MasterPage with LASER IMAGER Products
Author: [email protected], Edition: May ´05 2
Kodak MasterPage via DICOM with Kodak DryView 8300 LASER IMAGER
Requirements: MasterPage v8.0 Requirements: 8300 v4.9.1, 8300 DICOM board v3.3, 8300 LUT v3.0.3B Note: Mod.Group and Contrast into Kodak camera have to be configured differently
if images that have to be printed from MasterPage are either a) Kodak CR images or b) CT/MR images
- a) Kodak CR images are already lutted by Kodak CR, not lutted by MasterPage, Linear-in-Density LUT into Camera ie C=1, Modality Group=4
- b) CT/MR images are not lutted by CT/MR, not lutted by MasterPage, lutted by Camera ie C=10, Modality Group=0
MasterPage Setup for 8300 Portrait: n on Communication->Directory->Add Menu: n Name=8300 Portrait, Connection Type=DICOM, IP Address=accordingly n DICOM: Port=104, Called AE Title=8300, Calling AE Title=MasterPage n DICOM: Supp.Services: Store=Off, Print=On, Query/Retrieve=Off, Worklist=Off n Options: Print: Magnif.=NONE, Available=On, Title=8x10 in. n Options: Print: Width=2256, Height=2676, Pixel Size=85 n Make an ECHO test, just to verify that the DICOM connection is working ok n in order to print into Patient File / Print Layout: n a) into Print / Print Setup Menu: n select Name=8300 Portrait, Size=8x10, Add to Format menu=On n Black&White=On, Color=Off, Bits per pixel=8, Background Color=Black n Zoom=100, Copies=1, Trim around Image=Off, Trim around Division=On n b) into Image/Zoom: FitToWindow=On (for True Size, FixedZoom100%=On) n into Image: Annotations and Measurements=On, Measurement Scale=On n into Image: DICOM informations=On, DICOM Overlays=On n c) into Format: 1. 8x10 on 8300 Portrait=On, Show Footer=On n d) into Layout select the appropriate icon between the predifined ones n e) into Orientation select Portrait=On (note: Landscape selection will not work) MasterPage Setup for 8300 Landscape: n on Communication->Directory->Add Menu: n Name=8300 Landscape, Connection Type=DICOM, IP Address=accordingly
Kodak DryView 8300
DICOM Network
KodakMasterPage Workstation
Kodak workstation MasterPage with LASER IMAGER Products
Author: [email protected], Edition: May ´05 3
n DICOM: Port=104, Called AE Title=8300, Calling AE Title=MasterPage n DICOM: Supp.Services: Store=Off, Print=On, Query/Retrieve=Off, Worklist=Off n Options: Print: Magnif.=NONE, Available=On, Title=8x10 in. n Options: Print: Width=2136, Height=2736, Pixel Size=85 n Make an ECHO test, just to verify that the DICOM connection is working ok n in order to print into Patient File / Print Layout: n a) into Print / Print Setup Menu: n select Name=8300 Landscape, Size=8x10, Add to Format menu=On n Black&White=On, Color=Off, Bits per pixel=8, Background Color=Black n Zoom=100, Copies=1, Trim around Image=Off, Trim around Division=On n b) into Image/Zoom: FitToWindow=On (for True Size, FixedZoom100%=On) n into Image: Annotations and Measurements=On, Measurement Scale=On n into Image: DICOM informations=On, DICOM Overlays=On n c) into Format: 1. 8x10 on 8300 Landscape=On, Show Footer=On n d) into Layout select the appropriate icon between the predifined ones n e) into Orientation select Landscape=On (note: Portrait selection will not work) 8300 Setup: n on 8300 Operator Menu into Configure User set: n Density=16, Contrast= a) 1 or b) 10, Sharp/Smooth=1 n on 8300 Service Menu into Configure User set: Modality Group= a) 4 or b) 0
Kodak workstation MasterPage with LASER IMAGER Products
Author: [email protected], Edition: May ´05 4
Kodak MasterPage via DICOM with Kodak Digital Science 190 MEDICAL LASER PRINTER
Requirements: MasterPage v8.0 Requirements: 190 rel. 1.7.29 Note: the Curve Shape into Kodak camera have to be configured differently
if images that have to be printed from MasterPage are either a) Kodak CR images or b) CT/MR images
- a) Kodak CR images are already lutted by Kodak CR, not lutted by MasterPage, Linear-in-Density LUT into Camera ie Curve Shape=0.0, Film Contrast=0
- b) CT/MR images are not lutted by CT/MR, not lutted by MasterPage, lutted by Camera ie Curve Shape=434 (ie 3.0), Film Contrast=0
Note: if from MasterPage both typeof images have to be printed, define on MasterPage 2 printers with same IP and Port but different AEtitles
MasterPage Setup: n on Communication->Directory->Add Menu: n Name=DryView, Connection Type=DICOM, IP Address=accordingly n DICOM: Port=5040, Called AE Title=190, Calling AE Title=MasterPage n DICOM: Supp.Services: Store=Off, Print=On, Query/Retrieve=Off, Worklist=Off n Options: Print: Magnif.=NONE, Available=On, Title=14x17 in. n Options: Print: Width=4096, Height=5120, Pixel Size=80 n Make an ECHO test, just to verify that the DICOM connection is working ok n in order to print into Patient File / Print Layout: n a) into Print / Print Setup Menu: n select Name=DryView, Size=14x17, Add to Format menu=On n Black&White=On, Color=Off, Bits per pixel=12, Background Color=Black n Zoom=100, Copies=1, Trim around Image=Off, Trim around Division=On n b) into Image/Zoom: FitToWindow=On (for True Size, FixedZoom100%=On) n into Image: Annotations and Measurements=On, Measurement Scale=On n into Image: DICOM informations=On, DICOM Overlays=On n c) into Format: 1. 14x17 on DryView=On, Show Footer=On n d) into Layout select the appropriate icon between the predifined ones n e) into Orientation eg Portrait=On 190 Setup:
DICOM Network
Kodak 190 cameraKodakMasterPage Workstation
Kodak workstation MasterPage with LASER IMAGER Products
Author: [email protected], Edition: May ´05 5
n On 190 Control Panel press Menu, Setup: n Printer Density=3.00, Curve Shape= a) 0 or b) 3 ie 435 n Contrast=0, Contrast Pivot Density=1.2 n IPAddress=accordingly, Subnet Mask=accordingly, Gateway Address=accordingly n Port=5040, Network Node Name=Kodak MLP190, Connection Type=RJ45
Kodak workstation MasterPage with LASER IMAGER Products
Author: [email protected], Edition: May ´05 6
Kodak MasterPage via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /
Kodak DryView 8500 LASER IMAGER / Plus (see also 8800/8500 Dual)
Requirements: MasterPage v8.0 Requirements: 9410 v1.6, 8500 v1.34 Note: the TFT and Contrast into Kodak camera have to be configured differently
if images that have to be printed from MasterPage are either a) Kodak CR images or b) CT/MR images
- a) Kodak CR images are already lutted by Kodak CR, not lutted by MasterPage, Linear-in-Density LUT into Camera ie TFT= WRKSTN2A, C=2
- b) CT/MR images are not lutted by CT/MR, not lutted by MasterPage, lutted by Camera ie TFT=VER693C0, C=6
MasterPage Setup: n on Communication->Directory->Add Menu: n Name=DryView, Connection Type=DICOM, IP Address=accordingly n DICOM: Port=1024, Called AE Title=9410, Calling AE Title=MasterPage n DICOM: Supp.Services: Store=Off, Print=On, Query/Retrieve=Off, Worklist=Off n Options: Print: Magnif.=NONE, Available=On, Title=11x14 in. n Options: Print: Width=3380, Height=4280, Pixel Size=78 n Make an ECHO test, just to verify that the DICOM connection is working ok n in order to print into Patient File / Print Layout: n a) into Print / Print Setup Menu: n select Name=DryView, Size=11x14, Add to Format menu=On n Black&White=On, Color=Off, Bits per pixel=12, Background Color=Black n Zoom=100, Copies=1, Trim around Image=Off, Trim around Division=On n b) into Image/Zoom: FitToWindow=On (for True Size, FixedZoom100%=On) n into Image: Annotations and Measurements=On, Measurement Scale=On n into Image: DICOM informations=On, DICOM Overlays=On n c) into Format: 1. 11x14 on DryView=On, Show Footer=On n d) into Layout select the appropriate icon between the predifined ones n e) into Orientation eg Portrait=On
Kodak MasterPage Workstation
Kodak DryView 8500 Plus
Kodak 9410 PACS Link
DICOM Network
3M8700 DryViewFiber Cable
Fiber Cable
Kodak workstation MasterPage with LASER IMAGER Products
Author: [email protected], Edition: May ´05 7
9410 Setup: n on Device Setup, LOCAL PRINTERS:
n Printer=8500, Model=8500, Output=Fiber n Command Set=Superset, Baud=19200, Data=8, Stop=1, Parity=None n Pixel=12, Header/Line, Timeout=60, Transfer Rate=2 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87
n on Device Setup, SCP PRINTERS, Current Providers: n Printer=8500, AE Title= 9410, Port= 1024, Max Associations= 5 n on Device Setup, SCP PRINTERS, Registered Users:
n SCU AETitle= accordingly, SCU IPAddr=accordingly n SCP=8500, Copies=1, Contrast Table= a) 2 or b) 6 n TFT/ULUT= a) Wrkstn2a.w87 or b) Ver693c0.w87 n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=0 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0
8500 Plus Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=12, Header/Line, Parity=Enable Even, Port=0, Timeout=60
Kodak workstation MasterPage with LASER IMAGER Products
Author: [email protected], Edition: May ´05 8
Kodak MasterPage via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /
Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual)
Requirements: MasterPage v8.0 Requirements: 9410 v1.6, 8700 v1.34 Note: the TFT and Contrast into Kodak camera have to be configured differently
if images that have to be printed from MasterPage are either a) Kodak CR images or b) CT/MR images
- a) Kodak CR images are already lutted by Kodak CR, not lutted by MasterPage, Linear-in-Density LUT into Camera ie TFT= WRKSTN2A, C=2
- b) CT/MR images are not lutted by CT/MR, not lutted by MasterPage, lutted by Camera ie TFT=VER693C0, C=6
MasterPage Setup: n on Communication->Directory->Add Menu: n Name=DryView, Connection Type=DICOM, IP Address=accordingly n DICOM: Port=1024, Called AE Title=9410, Calling AE Title=MasterPage n DICOM: Supp.Services: Store=Off, Print=On, Query/Retrieve=Off, Worklist=Off n Options: Print: Magnif.=NONE, Available=On, Title=14x17 in. n Options: Print: Width=4096, Height=5220, Pixel Size=78 n Make an ECHO test, just to verify that the DICOM connection is working ok n in order to print into Patient File / Print Layout: n a) into Print / Print Setup Menu: n select Name=DryView, Size=14x17, Add to Format menu=On n Black&White=On, Color=Off, Bits per pixel=12, Background Color=Black n Zoom=100, Copies=1, Trim around Image=Off, Trim around Division=On n b) into Image/Zoom: FitToWindow=On (for True Size, FixedZoom100%=On) n into Image: Annotations and Measurements=On, Measurement Scale=On n into Image: DICOM informations=On, DICOM Overlays=On n c) into Format: 1. 14x17 on DryView=On, Show Footer=On n d) into Layout select the appropriate icon between the predifined ones n e) into Orientation eg Portrait=On
KodakMasterPage Workstation
Kodak DryView 8700 Plus
Kodak 9410 PACS Link
DICOM Network
3M8700 DryViewFiber Cable
Fiber Cable
Kodak workstation MasterPage with LASER IMAGER Products
Author: [email protected], Edition: May ´05 9
9410 Setup: n on Device Setup, LOCAL PRINTERS:
n Printer=8700, Model=8700, Output=Fiber n Command Set=Superset, Baud=19200, Data=8, Stop=1, Parity=None n Pixel=12, Header/Line, Timeout=60, Transfer Rate=2 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87
n on Device Setup, SCP PRINTERS, Current Providers: n Printer=8700, AE Title= 9410, Port= 1024, Max Associations= 5 n on Device Setup, SCP PRINTERS, Registered Users:
n SCU AETitle= accordingly, SCU IPAddr=accordingly n SCP=8700, Copies=1, Contrast Table= a) 2 or b) 6 n TFT/ULUT= a) Wrkstn2a.w87 or b) Ver693c0.w87 n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=0 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0
8700 Plus Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=12, Header/Line, Parity=Enable Even, Port=0, Timeout=60
Kodak workstation MasterPage with LASER IMAGER Products
Author: [email protected], Edition: May ´05 10
Kodak MasterPage via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /
Kodak DryView 8100 LASER IMAGER
Requirements: MasterPage v8.0 Requirements: 9410 v1.6, 8100 v2.4.1 Note: the TFT and Contrast into Kodak camera have to be configured differently
if images that have to be printed from MasterPage are either a) Kodak CR images or b) CT/MR images
- a) Kodak CR images are already lutted by Kodak CR, not lutted by MasterPage, Linear-in-Density LUT into Camera ie TFT= WRKSTN2A, C=2
- b) CT/MR images are not lutted by CT/MR, not lutted by MasterPage, lutted by Camera ie TFT=VER693C0, C=6
MasterPage Setup: n on Communication->Directory->Add Menu: n Name=DryView, Connection Type=DICOM, IP Address=accordingly n DICOM: Port=1024, Called AE Title=9410, Calling AE Title=MasterPage n DICOM: Supp.Services: Store=Off, Print=On, Query/Retrieve=Off, Worklist=Off n Options: Print: Magnif.=NONE, Available=On, Title=14x17 in. n Options: Print: Width=4096, Height=5216, Pixel Size=78 n Make an ECHO test, just to verify that the DICOM connection is working ok n in order to print into Patient File / Print Layout: n a) into Print / Print Setup Menu: n select Name=DryView, Size=14x17, Add to Format menu=On n Black&White=On, Color=Off, Bits per pixel=12, Background Color=Black n Zoom=100, Copies=1, Trim around Image=Off, Trim around Division=On n b) into Image/Zoom: FitToWindow=On (for True Size, FixedZoom100%=On) n into Image: Annotations and Measurements=On, Measurement Scale=On n into Image: DICOM informations=On, DICOM Overlays=On n c) into Format: 1. 14x17 on DryView=On, Show Footer=On n d) into Layout select the appropriate icon between the predifined ones n e) into Orientation eg Portrait=On
Kodak DryView 8100Kodak 9410 PACS Link
DICOM Network
COPCIL BoardCopper Cable Control 9-pin
Data 37-pin
RS4229-pole Plug
KodakMasterPage Workstation
Kodak workstation MasterPage with LASER IMAGER Products
Author: [email protected], Edition: May ´05 11
9410 Setup: on Device Setup, LOCAL PRINTERS: n Printer=8100, Model=8100 4096 pxls/line, Output=Copper n Baud=1200, Parity=Even, Data=8, Stop=1, Command Set=952 n Pixel=12, Header/Line, Timeout=60, Transfer Rate=1 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87 on Device Setup, SCP PRINTERS, Current Providers: n Printer=8100, AE Title= 9410, Port= 1024, Max Associations= 5 on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle= accordingly, SCU IPAddr=accordingly n SCP=8100, Copies=1, Contrast Table= a) 2 or b) 6 n TFT/ULUT= a) Wrkstn2a.w87 or b) Ver693c0.w87 n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=0 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0 8100 Setup on CONFIGURATION Menu: n on SIB board (ie external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=90, P1,…,P6=0
n on IMAGE QLTY-> Mag Scaling=Off, Pixel Correct=Off, 952 Override=Off n on IMAGE QUALITY-> TFT FILES Menu: TFT=Ver693c0.w87 n on LOCAL PANEL Menu: Contrast=6, Density=3.00 n on SYSTEM Menu: Acquire=Digital, Max.Img.Columns=4361 n on DIGITAL Menu: Pixel Depth=12, Header/Line, Parity=Even
Kodak workstation MasterPage with LASER IMAGER Products
Author: [email protected], Edition: May ´05 12
Kodak MasterPage via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /
Kodak DryView 8300 LASER IMAGER
Requirements: MasterPage v8.0 Requirements: 9410 v1.6, 8300 v4.9.1, 8300 LUT v3.0.3B Note: TFT/ULUT and Contrast into Kodak camera have to be configured differently
if images that have to be printed from MasterPage are either a) Kodak CR images or b) CT/MR images
- a) Kodak CR images are already lutted by Kodak CR, not lutted by MasterPage, Linear-in-Density LUT into Camera ie TFT/ULUT= wrkstn83a.w8u, C=1
- b) CT/MR images are not lutted by CT/MR, not lutted by MasterPage, lutted by Camera ie TFT/ULUT= u1_109b.w8u, C=10
MasterPage Setup for 8300 Portrait: n on Communication->Directory->Add Menu: n Name=8300 Portrait, Connection Type=DICOM, IP Address=accordingly n DICOM: Port=1024, Called AE Title=9410, Calling AE Title=MasterPage n DICOM: Supp.Services: Store=Off, Print=On, Query/Retrieve=Off, Worklist=Off n Options: Print: Magnif.=NONE, Available=On, Title=8x10 in. n Options: Print: Width=2256, Height=2676, Pixel Size=85 n Make an ECHO test, just to verify that the DICOM connection is working ok n in order to print into Patient File / Print Layout: n a) into Print / Print Setup Menu: n select Name=8300 Portrait, Size=8x10, Add to Format menu=On n Black&White=On, Color=Off, Bits per pixel=8, Background Color=Black n Zoom=100, Copies=1, Trim around Image=Off, Trim around Division=On n b) into Image/Zoom: FitToWindow=On (for True Size, FixedZoom100%=On) n into Image: Annotations and Measurements=On, Measurement Scale=On n into Image: DICOM informations=On, DICOM Overlays=On n c) into Format: 1. 8x10 on 8300 Portrait =On, Show Footer=On n d) into Layout select the appropriate icon between the predifined ones n e) into Orientation select Portrait=On (note: Landscape selection will not work)
Kodak DryView 8300Kodak 9410 PACS Link
DICOM Network
Control 9 pin
Data 37 pin
COPCIL board Copper Cable
KodakMasterPage Workstation
Kodak workstation MasterPage with LASER IMAGER Products
Author: [email protected], Edition: May ´05 13
MasterPage Setup for 8300 Landscape: n on Communication->Directory->Add Menu: n Name=8300 Landscape, Connection Type=DICOM, IP Address=accordingly n DICOM: Port=1024, Called AE Title=9410, Calling AE Title=MasterPage n DICOM: Supp.Services: Store=Off, Print=On, Query/Retrieve=Off, Worklist=Off n Options: Print: Magnif.=NONE, Available=On, Title=8x10 in. n Options: Print: Width=2136, Height=2736, Pixel Size=85 n Make an ECHO test, just to verify that the DICOM connection is working ok n in order to print into Patient File / Print Layout: n a) into Print / Print Setup Menu: n select Name=8300 Landscape, Size=8x10, Add to Format menu=On n Black&White=On, Color=Off, Bits per pixel=8, Background Color=Black n Zoom=100, Copies=1, Trim around Image=Off, Trim around Division=On n b) into Image/Zoom: FitToWindow=On (for True Size, FixedZoom100%=On) n into Image: Annotations and Measurements=On, Measurement Scale=On n into Image: DICOM informations=On, DICOM Overlays=On n c) into Format: 1. 8x10 on 8300 Landscape=On, Show Footer=On n d) into Layout select the appropriate icon between the predifined ones n e) into Orientation select Landscape=On (note: Portrait selection will not work) 9410 Setup: n on Device Setup, LOCAL PRINTERS:
n Printer=8300, Model=8300 Copper, Output=Copper n Command Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Pixel=8, Header/Line, Timeout=60, Transfer Rate=1 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=0, Max.Density=300, Contrast=6, Border Density=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=upmsv3k.w8u
n on Device Setup, SCP PRINTERS, Current Providers: n Printer=8300, AE Title= 9410, Port= 1024, Max Associations= 5 n on Device Setup, SCP PRINTERS, Registered Users:
n SCU AETitle= accordingly, SCU IPAddr=accordingly n SCP=8300, Copies=1, Contrast Table= a) 1 or b) 10 n TFT/ULUT= a) wrkstn83a.w8u or b) u1_109b.w8u n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=1 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0
8300 Setup: n on Operator Menu set: D=16, C=6, Sharp/Smooth=0 ie Auto n on Operator Menu set: Film Layout: 1 on 1=Portrait n on Service Menu set: Ratio=1.00, Serial=1200,8,1,Even,Comma,3M, Memory=16 n on Service Menu set: Digital Interface: Parity=Even, Modality Group=1
Kodak workstation MasterPage with LASER IMAGER Products
Author: [email protected], Edition: May ´05 14
Kodak MasterPage via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /
Kodak DryView 8610 LASER IMAGING SYSTEM / for Mammography (see also 8600)
Requirements: MasterPage v8.0 Requirements: 9410 v1.6, 8610 v2.4 (if 8600 v2.5) Note: This setup is basically also valid for 8600 camera Note: Contrast Group, Contrast, Gamma into Kodak camera to be configured
differently if images that have to be printed from MasterPage are either a) Kodak CR images or b) CT/MR images
- a) Kodak CR images are already lutted by Kodak CR, not lutted by MasterPage, Linear-in-Density LUT into Camera ie Contr.Group=1, C=1, Gamma=Lin.Density
- b) CT/MR images are not lutted by CT/MR, not lutted by MasterPage, lutted by Camera ie Contr.Group=6, C=3, Gamma=Lin.Transmittance
MasterPage Setup: n on Communication->Directory->Add Menu: n Name=DryView, Connection Type=DICOM, IP Address=accordingly n DICOM: Port=1024, Called AE Title=9410, Calling AE Title=MasterPage n DICOM: Supp.Services: Store=Off, Print=On, Query/Retrieve=Off, Worklist=Off n Options: Print: Magnif.=NONE, Available=On, Title=8x10 in. n Options: Print: Width=5024, Height=6200, Pixel Size=39 n Make an ECHO test, just to verify that the DICOM connection is working ok n in order to print into Patient File / Print Layout: n a) into Print / Print Setup Menu: n select Name=DryView, Size=8x10, Add to Format menu=On n Black&White=On, Color=Off, Bits pixel=12 (8 if 8600), Background Color=Black n Zoom=100, Copies=1, Trim around Image=Off, Trim around Division=On n b) into Image/Zoom: FitToWindow=On (for True Size, FixedZoom100%=On) n into Image: Annotations and Measurements=On, Measurement Scale=On n into Image: DICOM informations=On, DICOM Overlays=On n c) into Format: 1. 8x10 on DryView=On, Show Footer=On n d) into Layout select the appropriate icon between the predifined ones n e) into Orientation eg Portrait=On
KodakMasterPage Workstation
Kodak DryView 8610
Kodak 9410 PACS Link
DICOM Network
Control 9 pin
Data 37 pin
COPCIL board Copper Cable
Kodak workstation MasterPage with LASER IMAGER Products
Author: [email protected], Edition: May ´05 15
9410 Setup: n on Device Setup, LOCAL PRINTERS:
n Printer=8610, Model=8600/8610, Output=Copper n Command Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Pixel=12 (8 if 8600), Header/Line, Timeout=60, Transfer Rate=2 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=1, Installed TFT/ULUT= don’t care n Max.Density=300, Contrast=5, Border Density=0
n on Device Setup, SCP PRINTERS, Current Providers: n Printer=8610, AE Title= 9410, Port= 1024, Max Associations= 5 n on Device Setup, SCP PRINTERS, Registered Users:
n SCU AETitle= accordingly, SCU IPAddr=accordingly n SCP=8610, Copies=1, Contrast Table= a) 6 or b) 3, Max.Density=350 n Border Density=0, Mag.Type=8, Smoothing=1 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Gamma= a) Linear in Density or b) Linear in Transmittance n Contrast Group= a) 1 or b) 6, Kernel Group=1 n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0
8610 Setup: on 8610 Operator Menu into Test Menu, Software Version, verify: n Imager=2.4, VRTX32=1.08, Contrast=6.P.2, Conv.Kernel=M.1.0 n (if 8600: Imager=2.5, Contrast=6.G.7, Conv.Kernel=1.0.5) n on 8610 Operator Menu into Configure User set: n Density=16, Contrast=6, Sharp/Smooth=1, Film Layout: 1:1P n Gamma=Xmittance, Image Size=Scale To Fit, Detector Size=don’t care n on 8610 Service Menu into Configure User set:
n Ratio=1.00, Serial Control Intf.=1200,8,1,Even,Comma,3M, Memory=255 n Digital Interface: Parity=Even, Modality Group=1, Smoothing Group=1
Kodak workstation MasterPage with LASER IMAGER Products
Author: [email protected], Edition: May ´05 16
Kodak MasterPage via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /
Kodak Digital Science 969 HQ LASER IMAGER
Requirements: MasterPage v8.0 Requirements: 9410 v1.6, 969 v5.2 Note: other HQ matrixes 11x14=3020x3960, 8x10=2076x2788 Note: the TFT and Contrast into Kodak camera have to be configured differently
if images that have to be printed from MasterPage are either a) Kodak CR images or b) CT/MR images
- a) Kodak CR images are already lutted by Kodak CR, not lutted by MasterPage, Linear-in-Density LUT into Camera ie TFT= WRKSTN2A, C=2
- b) CT/MR images are not lutted by CT/MR, not lutted by MasterPage, lutted by Camera ie TFT=VER693C0, C=6
MasterPage Setup: n on Communication->Directory->Add Menu: n Name=DryView, Connection Type=DICOM, IP Address=accordingly n DICOM: Port=1024, Called AE Title=9410, Calling AE Title=MasterPage n DICOM: Supp.Services: Store=Off, Print=On, Query/Retrieve=Off, Worklist=Off n Options: Print: Magnif.=NONE, Available=On, Title=14x17 in. n Options: Print: Width=4096, Height=4992, Pixel Size=82 n Make an ECHO test, just to verify that the DICOM connection is working ok n in order to print into Patient File / Print Layout: n a) into Print / Print Setup Menu: n select Name=DryView, Size=14x17, Add to Format menu=On n Black&White=On, Color=Off, Bits per pixel=12, Background Color=Black n Zoom=100, Copies=1, Trim around Image=Off, Trim around Division=On n b) into Image/Zoom: FitToWindow=On (for True Size, FixedZoom100%=On) n into Image: Annotations and Measurements=On, Measurement Scale=On n into Image: DICOM informations=On, DICOM Overlays=On n c) into Format: 1. 14x17 on DryView=On, Show Footer=On n d) into Layout select the appropriate icon between the predifined ones n e) into Orientation eg Portrait=On
Kodak M969 HQKodak 9410 PACS Link
DICOM Network
Fiber Cable
Fiber Cable
3 M H Q L a s e r I m a g e r
KodakMasterPage Workstation
Kodak workstation MasterPage with LASER IMAGER Products
Author: [email protected], Edition: May ´05 17
9410 Setup: n on Device Setup, LOCAL PRINTERS:
n Printer=969, Model=969, Output=Fiber n Command Set=Superset, Baud=19200, Data=8, Stop=1, Parity=None n Pixel=12, Header/Line, Timeout=60, Transfer Rate=2 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87
n on Device Setup, SCP PRINTERS, Current Providers: n Printer=969, AE Title= 9410, Port= 1024, Max Associations= 5 n on Device Setup, SCP PRINTERS, Registered Users:
n SCU AETitle= accordingly, SCU IPAddr=accordingly n SCP=969, Copies=1, Contrast Table= a) 2 or b) 6 n TFT/ULUT= a) Wrkstn2a.w87 or b) Ver693c0.w87 n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=0 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0
969 Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=12, Header/Line, Port=0, Parity=Enable Even, Timeout=60
Kodak workstation MasterPage with LASER IMAGER Products
Author: [email protected], Edition: May ´05 18
Kodak MasterPage via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /
Kodak Ektascan 160 LASER IMAGER
Requirements: MasterPage v8.0 Requirements: MIM200 v6.1, KELI 160 v7.2 Note: the Curve Shape into Kodak camera have to be configured differently
if images that have to be printed from MasterPage are either a) Kodak CR images or b) CT/MR images
- a) Kodak CR images are already lutted by Kodak CR, not lutted by MasterPage, Linear-in-Density LUT into Camera ie Curve Shape=0.0, Film Contrast=0
- b) CT/MR images are not lutted by CT/MR, not lutted by MasterPage, lutted by Camera ie Curve Shape=434 (ie 3.0), Film Contrast=0
Note: if from MasterPage both typeof images have to be printed, define on MasterPage 2 printers with same IP and Port but different AEtitles
MasterPage Setup: n on Communication->Directory->Add Menu: n Name=DryView, Connection Type=DICOM, IP Address=accordingly n DICOM: Port=5040, Called AE Title=160, Calling AE Title=MasterPage n DICOM: Supp.Services: Store=Off, Print=On, Query/Retrieve=Off, Worklist=Off n Options: Print: Magnif.=NONE, Available=On, Title=14x17 in. n Options: Print: Width=4360, Height=5348, Pixel Size=78 n Make an ECHO test, just to verify that the DICOM connection is working ok n in order to print into Patient File / Print Layout: n a) into Print / Print Setup Menu: n select Name=DryView, Size=14x17, Add to Format menu=On n Black&White=On, Color=Off, Bits per pixel=12, Background Color=Black n Zoom=100, Copies=1, Trim around Image=Off, Trim around Division=On n b) into Image/Zoom: FitToWindow=On (for True Size, FixedZoom100%=On) n into Image: Annotations and Measurements=On, Measurement Scale=On n into Image: DICOM informations=On, DICOM Overlays=On n c) into Format: 1. 14x17 on DryView=On, Show Footer=On n d) into Layout select the appropriate icon between the predifined ones n e) into Orientation eg Portrait=On
Kodak MIM 200
DICOM Network
CrossedNetwork Cable
Kodak 160 cameraKodakMasterPage Workstation
Kodak workstation MasterPage with LASER IMAGER Products
Author: [email protected], Edition: May ´05 19
MIM200 Setup: n on Configure, Network: n Computer Name=eg Kodak160, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, KELI 160, Set:
n General: Log.Name=KELI 160, IPAddr=100.100.100.30, n General: Database Name=KELI 160, Model=KELI 160 n Media Info: Media=35x43cm, 4361x5348, 5228, Any (Blue,Clear) n Supported Item: Collation=On, Text=On, Tonescaling on Image=On n Supported Item: Pivot Density=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8 n Image Processing: Grayscale=On, Minify/Crop=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7
n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape= a) 0 or b) 3 ie 435 (Always=N) n Contrast (wet)=0 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Minify/Scale=On, Crop=Off, Text Box Relocation=None (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Interpolation= Cubic, Border=3.99 (Always=N) n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N) n Negotiate Color Print=Off
160 Setup: no modality-specific setup needed
Kodak workstation MasterPage with LASER IMAGER Products
Author: [email protected], Edition: May ´05 20
Kodak MasterPage via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /
Kodak Ektascan 2180 LASER PRINTER
Requirements: MasterPage v8.0 Requirements: MIM200 v6.1, 2180 rel. 2.17H Note: other 2180 matrixes 14x14=4096x4132, 11x14=3236x4132, 8x10=2284x2836 Note: the Curve Shape into Kodak camera have to be configured differently
if images that have to be printed from MasterPage are either a) Kodak CR images or b) CT/MR images
- a) Kodak CR images are already lutted by Kodak CR, not lutted by MasterPage, Linear-in-Density LUT into Camera ie Curve Shape=0.0, Film Contrast=0
- b) CT/MR images are not lutted by CT/MR, not lutted by MasterPage, lutted by Camera ie Curve Shape=434 (ie 3.0), Film Contrast=0
Note: if from MasterPage both typeof images have to be printed, define on MasterPage 2 printers with same IP and Port but different AEtitles
MasterPage Setup: n on Communication->Directory->Add Menu: n Name=DryView, Connection Type=DICOM, IP Address=accordingly n DICOM: Port=5040, Called AE Title=2180, Calling AE Title=MasterPage n DICOM: Supp.Services: Store=Off, Print=On, Query/Retrieve=Off, Worklist=Off n Options: Print: Magnif.=NONE, Available=On, Title=14x17 in. n Options: Print: Width=4096, Height=5156, Pixel Size=79 n Make an ECHO test, just to verify that the DICOM connection is working ok n in order to print into Patient File / Print Layout: n a) into Print / Print Setup Menu: n select Name=DryView, Size=14x17, Add to Format menu=On n Black&White=On, Color=Off, Bits per pixel=12, Background Color=Black n Zoom=100, Copies=1, Trim around Image=Off, Trim around Division=On n b) into Image/Zoom: FitToWindow=On (for True Size, FixedZoom100%=On) n into Image: Annotations and Measurements=On, Measurement Scale=On n into Image: DICOM informations=On, DICOM Overlays=On n c) into Format: 1. 14x17 on DryView=On, Show Footer=On n d) into Layout select the appropriate icon between the predifined ones n e) into Orientation eg Portrait=On
Kodak MIM 200
DICOM Network
Fiber Cable
Kodak 2180 cameraKodakMasterPage Workstation
Kodak workstation MasterPage with LASER IMAGER Products
Author: [email protected], Edition: May ´05 21
MIM200 Setup: n on Configure, Network: n Computer Name=eg Kodak2180, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, KELP 2180, Set:
n General: Log.Name=KELP2180, Database Name=KELP 2180 n General: Model=KELP 2180, Memory=24, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4136x5160, 5030, (Blue) n Media Info:Media=35x35cm,4136x4136,4006, (Blue) n Media Info: Media=11x14in, 3240x4136, 4006, (Blue) n Media Info: Media=8x10in, 2290x2840, 2710, (Blue) n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=2 n Formatting: Pixel Pitch=12.6582 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7
n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape=a) 0 or b) 3 ie 435 (Always=N), Contrast (wet)=0 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Minify/Scale=On, Crop=Off, Text Box Relocation=None n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Interpolation= Cubic, Border=3.99 (Always=N) n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N) n Negotiate Color Print=Off
2180 Setup: n Optical Interface board will automatic configure into 2180, no setup needed
Kodak workstation MasterPage with LASER IMAGER Products
Author: [email protected], Edition: May ´05 22
Kodak MasterPage via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /
Kodak Ektascan 1120 LASER PRINTER
Requirements: MasterPage v8.0 Requirements: MIM200 v6.1, 1120 rel. 2.40/032 Note: other 1120 matrixes 14x14=4096x4108, 11x14=4096x3232, 8x10=2304x2900 Note: the Curve Shape into Kodak camera have to be configured differently
if images that have to be printed from MasterPage are either a) Kodak CR images or b) CT/MR images
- a) Kodak CR images are already lutted by Kodak CR, not lutted by MasterPage, Linear-in-Density LUT into Camera ie Curve Shape=0.0, Film Contrast=0
- b) CT/MR images are not lutted by CT/MR, not lutted by MasterPage, lutted by Camera ie Curve Shape=434 (ie 3.0), Film Contrast=0
Note: if from MasterPage both typeof images have to be printed, define on MasterPage 2 printers with same IP and Port but different AEtitles
MasterPage Setup: n on Communication->Directory->Add Menu: n Name=DryView, Connection Type=DICOM, IP Address=accordingly n DICOM: Port=5040, Called AE Title=1120, Calling AE Title=MasterPage n DICOM: Supp.Services: Store=Off, Print=On, Query/Retrieve=Off, Worklist=Off n Options: Print: Magnif.=NONE, Available=On, Title=14x17 in. n Options: Print: Width=4096, Height=5132, Pixel Size=80 n Make an ECHO test, just to verify that the DICOM connection is working ok n in order to print into Patient File / Print Layout: n a) into Print / Print Setup Menu: n select Name=DryView, Size=14x17, Add to Format menu=On n Black&White=On, Color=Off, Bits per pixel=12, Background Color=Black n Zoom=100, Copies=1, Trim around Image=Off, Trim around Division=On n b) into Image/Zoom: FitToWindow=On (for True Size, FixedZoom100%=On) n into Image: Annotations and Measurements=On, Measurement Scale=On n into Image: DICOM informations=On, DICOM Overlays=On n c) into Format: 1. 14x17 on DryView=On, Show Footer=On n d) into Layout select the appropriate icon between the predifined ones n e) into Orientation eg Portrait=On
Kodak MIM 200
DICOM Network
Fiber Cable
Kodak 1120 cameraKodakMasterPage Workstation
Kodak workstation MasterPage with LASER IMAGER Products
Author: [email protected], Edition: May ´05 23
MIM200 Setup: n on Configure, Network: n Computer Name=eg Kodak1120, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, KELP 1120, Set:
n General: Log.Name=KELP1120, Database Name=KELP 1120 n General: Model=KELP 1120, Memory=20, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4096x5132, 5034, (Blue) n Media Info: Media=35x35cm, 4096x4108, 4010, (Blue) n Media Info: Media=11x14in, 4096x3232, 3134, (Blue) n Media Info: Media=8x10in, 2304x2900, 2802, (Blue) n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=3, Min Vert Sep=0 n Formatting: Trim Width Enabled=0, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.5 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=2.8 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7
n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape=a) 0 or b) 3 ie 435 (Always=N), Contrast (wet)=0 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Minify/Scale=On, Crop=Off, Text Box Relocation=None n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Interpolation= Cubic, Border=3.99 (Always=N) n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N) n Negotiate Color Print=Off
1120 Setup: n Optical Interface board will automatic configure into 1120, no setup needed
Kodak workstation MasterPage with LASER IMAGER Products
Author: [email protected], Edition: May ´05 24
Kodak MasterPage via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /
Kodak DryView 8200 LASER IMAGER
Requirements: MasterPage v8.0 Requirements: MIM200 v6.1, 8200 v3.5 Note: other 8200 matrixes 14x14=4360x4244, 11x14=3272x4360 Note: This setup is basically also valid for 25 PS computer Note: the TFT and Contrast into Kodak camera have to be configured differently
if images that have to be printed from MasterPage are either a) Kodak CR images or b) CT/MR images
- a) Kodak CR images are already lutted by Kodak CR, not lutted by MasterPage, Linear-in-Density LUT into Camera ie TFT= WRKSTN2A, C=2
- b) CT/MR images are not lutted by CT/MR, not lutted by MasterPage, lutted by Camera ie TFT=VER693C0, C=6
Note: if from MasterPage both typeof images have to be printed, define on MasterPage 2 printers with same IP and Port but different AEtitles
MasterPage Setup: n on Communication->Directory->Add Menu: n Name=DryView, Connection Type=DICOM, IP Address=accordingly n DICOM: Port=5040, Called AE Title=8200, Calling AE Title=MasterPage n DICOM: Supp.Services: Store=Off, Print=On, Query/Retrieve=Off, Worklist=Off n Options: Print: Magnif.=NONE, Available=On, Title=14x17 in. n Options: Print: Width=4360, Height=5220, Pixel Size=78 n Make an ECHO test, just to verify that the DICOM connection is working ok n in order to print into Patient File / Print Layout: n a) into Print / Print Setup Menu: n select Name=DryView, Size=14x17, Add to Format menu=On n Black&White=On, Color=Off, Bits per pixel=12, Background Color=Black n Zoom=100, Copies=1, Trim around Image=Off, Trim around Division=On n b) into Image/Zoom: FitToWindow=On (for True Size, FixedZoom100%=On) n into Image: Annotations and Measurements=On, Measurement Scale=On n into Image: DICOM informations=On, DICOM Overlays=On n c) into Format: 1. 14x17 on DryView=On, Show Footer=On
Kodak MIM 200
DICOM Network
CrossedNetwork Cable
Kodak DryView 8200
KodakMasterPage Workstation
Kodak workstation MasterPage with LASER IMAGER Products
Author: [email protected], Edition: May ´05 25
n d) into Layout select the appropriate icon between the predifined ones n e) into Orientation eg Portrait=On MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8200, Set:
n General: Log.Name=8200, IPAddr=100.100.100.40, n General: Database Name=8200, Model=8200, Memory=32 n Media Info: Media=35x43cm, 4361x5223, 5133, Blue n Media Info: Media=35x35cm, 4361x4247, 4157, Blue n Media Info: Media=11x14in, 3272x4361, 4271, Blue n Supported Item: Collation=On, Common Text=On, Tonescaling=On n Supported Item: Remote Image Deletion=On, Rotation=On n Interpolation: No Magnification=On, Bilin=On, Repl=On n Interpolation: Cubic Spline=On, Cubic Convolution 2=On n Format Types: Custom=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On n Formatting: Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20 n Formatting: Max Img Col=0, Max Img Row=0, n Formatting: Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify/Crop=On, Max Image Dmax=3.1 n SCU: Density Space= On, PLUT Service= On n SCU: Curve Shape Tonescaling=On, Perception LUT Tonescaling=On n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7
n at Keypad connected to MIM, press Menu, Service Menu, SCP Services: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT= a) Wrkstn2a.w87 or b) Ver693c0.w87 (Always=N) n Contrast (dry)= a) 2 or b) 6 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n Smoothing Type=0 (Always=N), Image Polarity=Normal (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Minify/Scale=On, Crop=Off, Text Box Relocation=None n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N)
Kodak workstation MasterPage with LASER IMAGER Products
Author: [email protected], Edition: May ´05 26
n Negotiate Color Print=Off 8200 Setup on CONFIGURATION Menu: n on IMAGE QUALITY-> TFT FILES Menu: TFT=Ver693c0.w87 n on LOCAL PANEL Menu: Contrast=6, Density=3.00 n on DICOM / SCU Config.: AE=MIM, TFT=VER693C0, C=6, Smoothing=0 n on DICOM Menu: DICOM Config.: AE=NER_ANY, Port=1025
Kodak workstation MasterPage with LASER IMAGER Products
Author: [email protected], Edition: May ´05 27
Kodak MasterPage via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /
Kodak DryView 8500 LASER IMAGER / Plus (see also 8800/8500 Dual)
Requirements: MasterPage v8.0 Requirements: MIM200 v6.1, 8500 v1.34 Note: This setup is basically also valid for 25 PS computer Note: the TFT and Contrast into Kodak camera have to be configured differently
if images that have to be printed from MasterPage are either a) Kodak CR images or b) CT/MR images
- a) Kodak CR images are already lutted by Kodak CR, not lutted by MasterPage, Linear-in-Density LUT into Camera ie TFT= WRKSTN2A, C=2
- b) CT/MR images are not lutted by CT/MR, not lutted by MasterPage, lutted by Camera ie TFT=VER693C0, C=6
Note: if from MasterPage both typeof images have to be printed, define on MasterPage 2 printers with same IP and Port but different AEtitles
MasterPage Setup: n on Communication->Directory->Add Menu: n Name=DryView, Connection Type=DICOM, IP Address=accordingly n DICOM: Port=5040, Called AE Title=8500, Calling AE Title=MasterPage n DICOM: Supp.Services: Store=Off, Print=On, Query/Retrieve=Off, Worklist=Off n Options: Print: Magnif.=NONE, Available=On, Title=11x14 in. n Options: Print: Width=3380, Height=4280, Pixel Size=78 n Make an ECHO test, just to verify that the DICOM connection is working ok n in order to print into Patient File / Print Layout: n a) into Print / Print Setup Menu: n select Name=DryView, Size=11x14, Add to Format menu=On n Black&White=On, Color=Off, Bits per pixel=12, Background Color=Black n Zoom=100, Copies=1, Trim around Image=Off, Trim around Division=On n b) into Image/Zoom: FitToWindow=On (for True Size, FixedZoom100%=On) n into Image: Annotations and Measurements=On, Measurement Scale=On n into Image: DICOM informations=On, DICOM Overlays=On n c) into Format: 1. 11x14 on DryView=On, Show Footer=On
Kodak MasterPage Workstation
Kodak DryView 8500 PlusDICOM Network
3M8700 DryViewFiber Cable
Fiber Cable
Kodak MIM 200
Kodak workstation MasterPage with LASER IMAGER Products
Author: [email protected], Edition: May ´05 28
n d) into Layout select the appropriate icon between the predifined ones n e) into Orientation eg Portrait=On MIM200 Setup: n on Configure, Network:
n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, 8500, Set: n General: Log.Name=8500 n General: Database Name=8500, Model=8500, Memory=32 n Media Info: Media=11x14in, 3388x4283, 4193, Blue n Output Params: Cmd=SuperSet,Baud=19200,Data=8,Stop=1,Parity=None n Output Params: Pixel=12, Header/Line, Transfer=2000 KHz, Acq=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7
n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT= a) Wrkstn2a.w87 or b) Ver693c0.w87 (Always=N) n Contrast (dry)= a) 2 or b) 6 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n Smoothing Type=0 (Always=N), Image Polarity=Normal (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Minify/Scale=On, Crop=Off, Text Box Relocation=None n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n Film Base=Blue Film (Always=N), Film Size=11INx14IN (Always=N) n Negotiate Color Print=Off
8500 Plus Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=12, Header/Line, Port=0, Parity=Disable Even, Timeout=60
Kodak workstation MasterPage with LASER IMAGER Products
Author: [email protected], Edition: May ´05 29
Kodak MasterPage via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /
Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual)
Requirements: MasterPage v8.0 Requirements: MIM200 v6.1, 8700 v1.34 Note: This setup is basically also valid for 25 PS computer Note: the TFT and Contrast into Kodak camera have to be configured differently
if images that have to be printed from MasterPage are either a) Kodak CR images or b) CT/MR images
- a) Kodak CR images are already lutted by Kodak CR, not lutted by MasterPage, Linear-in-Density LUT into Camera ie TFT= WRKSTN2A, C=2
- b) CT/MR images are not lutted by CT/MR, not lutted by MasterPage, lutted by Camera ie TFT=VER693C0, C=6
Note: if from MasterPage both typeof images have to be printed, define on MasterPage 2 printers with same IP and Port but different AEtitles
MasterPage Setup: n on Communication->Directory->Add Menu: n Name=DryView, Connection Type=DICOM, IP Address=accordingly n DICOM: Port=5040, Called AE Title=8700, Calling AE Title=MasterPage n DICOM: Supp.Services: Store=Off, Print=On, Query/Retrieve=Off, Worklist=Off n Options: Print: Magnif.=NONE, Available=On, Title=14x17 in. n Options: Print: Width=4096, Height=5220, Pixel Size=78 n Make an ECHO test, just to verify that the DICOM connection is working ok n in order to print into Patient File / Print Layout: n a) into Print / Print Setup Menu: n select Name=DryView, Size=14x17, Add to Format menu=On n Black&White=On, Color=Off, Bits per pixel=12, Background Color=Black n Zoom=100, Copies=1, Trim around Image=Off, Trim around Division=On n b) into Image/Zoom: FitToWindow=On (for True Size, FixedZoom100%=On) n into Image: Annotations and Measurements=On, Measurement Scale=On n into Image: DICOM informations=On, DICOM Overlays=On n c) into Format: 1. 14x17 on DryView=On, Show Footer=On
Kodak MasterPage Workstation
Kodak DryView 8700 PlusDICOM Network
3M8700 DryViewFiber Cable
Fiber Cable
Kodak MIM 200
Kodak workstation MasterPage with LASER IMAGER Products
Author: [email protected], Edition: May ´05 30
n d) into Layout select the appropriate icon between the predifined ones n e) into Orientation eg Portrait=On MIM200 Setup: n on Configure, Network:
n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, 8700, Set: n General: Log.Name=8700 n General: Database Name=8700, Model=8700, Memory=32 n Media Info: Media=35x43cm, 4096x5223, 5133, Blue n Output Params: Cmd=SuperSet,Baud=19200,Data=8,Stop=1,Parity=None n Output Params: Pixel=12, Header/Line, Transfer=2000 KHz, Acq=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7
n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT= a) Wrkstn2a.w87 or b) Ver693c0.w87 (Always=N) n Contrast (dry)= a) 2 or b) 6 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n Smoothing Type=0 (Always=N), Image Polarity=Normal (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Minify/Scale=On, Crop=Off, Text Box Relocation=None n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N) n Negotiate Color Print=Off
8700 Plus Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=12, Header/Line, Port=0, Parity=Disable Even, Timeout=60
Kodak workstation MasterPage with LASER IMAGER Products
Author: [email protected], Edition: May ´05 31
Kodak MasterPage via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /
Kodak DryView 8100 LASER IMAGER
Requirements: MasterPage v8.0 Requirements: MIM200 v6.1, 8100 v2.4.1 Note: This setup is basically also valid for 25 PS computer Note: the TFT and Contrast into Kodak camera have to be configured differently
if images that have to be printed from MasterPage are either a) Kodak CR images or b) CT/MR images
- a) Kodak CR images are already lutted by Kodak CR, not lutted by MasterPage, Linear-in-Density LUT into Camera ie TFT= WRKSTN2A, C=2
- b) CT/MR images are not lutted by CT/MR, not lutted by MasterPage, lutted by Camera ie TFT=VER693C0, C=6
Note: if from MasterPage both typeof images have to be printed, define on MasterPage 2 printers with same IP and Port but different AEtitles
MasterPage Setup: n on Communication->Directory->Add Menu: n Name=DryView, Connection Type=DICOM, IP Address=accordingly n DICOM: Port=5040, Called AE Title=8100, Calling AE Title=MasterPage n DICOM: Supp.Services: Store=Off, Print=On, Query/Retrieve=Off, Worklist=Off n Options: Print: Magnif.=NONE, Available=On, Title=14x17 in. n Options: Print: Width=4096, Height=5216, Pixel Size=78 n Make an ECHO test, just to verify that the DICOM connection is working ok n in order to print into Patient File / Print Layout: n a) into Print / Print Setup Menu: n select Name=DryView, Size=14x17, Add to Format menu=On n Black&White=On, Color=Off, Bits per pixel=12, Background Color=Black n Zoom=100, Copies=1, Trim around Image=Off, Trim around Division=On n b) into Image/Zoom: FitToWindow=On (for True Size, FixedZoom100%=On) n into Image: Annotations and Measurements=On, Measurement Scale=On n into Image: DICOM informations=On, DICOM Overlays=On n c) into Format: 1. 14x17 on DryView=On, Show Footer=On
Kodak DryView 8100
DICOM Network
COPCIL BoardCopper Cable Control 9-pin
Data 37-pin
RS4229-pole Plug
KodakMasterPage Workstation
Kodak MIM 200
Kodak workstation MasterPage with LASER IMAGER Products
Author: [email protected], Edition: May ´05 32
n d) into Layout select the appropriate icon between the predifined ones n e) into Orientation eg Portrait=On MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8100, Set:
n General: Log.Name=8100 n General: Database Name=8100, Model=8100, Memory=32 n Media Info: Media=35x43cm, 4096x5223, 5133, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=12, Header/Line, Transfer=1000 KHz, Acquire=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7
n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT= a) Wrkstn2a.w87 or b) Ver693c0.w87 (Always=N) n Contrast (dry)= a) 2 or b) 6 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n Smoothing Type=0 (Always=N), Image Polarity=Normal (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Minify/Scale=On, Crop=Off, Text Box Relocation=None n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N) n Negotiate Color Print=Off
8100 Setup on CONFIGURATION Menu: n on SIB board (ie external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952
Kodak workstation MasterPage with LASER IMAGER Products
Author: [email protected], Edition: May ´05 33
n Mem.Full=BSY, Alarm=Old, Acquire Timeout=90, P1,…,P6=0 n on IMAGE QLTY-> Mag Scaling=Off, Pixel Correct=Off, 952 Override=Off n on IMAGE QUALITY-> TFT FILES Menu: TFT=Ver693c0.w87 n on LOCAL PANEL Menu: Contrast=6, Density=3.00 n on SYSTEM Menu: Acquire=Digital, Max.Img.Columns=4361 n on DIGITAL Menu: Pixel Depth=12, Header/Line, Parity=Even
Kodak workstation MasterPage with LASER IMAGER Products
Author: [email protected], Edition: May ´05 34
Kodak MasterPage via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /
Kodak DryView 8300 LASER IMAGER
Requirements: MasterPage v8.0 Requirements: MIM200 v6.1, 8300 v4.9.1, 8300 LUT v3.0.3B Note: This setup is basically also valid for 25 PS computer Note: TFT/ULUT and Contrast into Kodak camera have to be configured differently
if images that have to be printed from MasterPage are either a) Kodak CR images or b) CT/MR images
- a) Kodak CR images are already lutted by Kodak CR, not lutted by MasterPage, Linear-in-Density LUT into Camera ie TFT/ULUT= wrkstn83a.w8u, C=1
- b) CT/MR images are not lutted by CT/MR, not lutted by MasterPage, lutted by Camera ie TFT/ULUT= u1_109b.w8u, C=10
Note: if from MasterPage both typeof images have to be printed, define on MasterPage 2 printers with same IP and Port but different AEtitles
MasterPage Setup for 8300 Portrait: n on Communication->Directory->Add Menu: n Name=8300 Portrait, Connection Type=DICOM, IP Address=accordingly n DICOM: Port=5040, Called AE Title=8300, Calling AE Title=MasterPage n DICOM: Supp.Services: Store=Off, Print=On, Query/Retrieve=Off, Worklist=Off n Options: Print: Magnif.=NONE, Available=On, Title=8x10 in. n Options: Print: Width=2256, Height=2676, Pixel Size=85 n Make an ECHO test, just to verify that the DICOM connection is working ok n in order to print into Patient File / Print Layout: n a) into Print / Print Setup Menu: n select Name=8300 Portrait, Size=8x10, Add to Format menu=On n Black&White=On, Color=Off, Bits per pixel=8, Background Color=Black n Zoom=100, Copies=1, Trim around Image=Off, Trim around Division=On n b) into Image/Zoom: FitToWindow=On (for True Size, FixedZoom100%=On) n into Image: Annotations and Measurements=On, Measurement Scale=On n into Image: DICOM informations=On, DICOM Overlays=On n c) into Format: 1. 8x10 on 8300 Portrait =On, Show Footer=On
Kodak DryView 8300
DICOM Network
Control 9 pin
Data 37 pin
COPCIL board Copper Cable
KodakMasterPage Workstation
Kodak MIM 200
Kodak workstation MasterPage with LASER IMAGER Products
Author: [email protected], Edition: May ´05 35
n d) into Layout select the appropriate icon between the predifined ones n e) into Orientation select Portrait=On (note: Landscape selection will not work) MasterPage Setup for 8300 Landscape: n on Communication->Directory->Add Menu: n Name=8300 Landscape, Connection Type=DICOM, IP Address=accordingly n DICOM: Port=5040, Called AE Title=8300, Calling AE Title=MasterPage n DICOM: Supp.Services: Store=Off, Print=On, Query/Retrieve=Off, Worklist=Off n Options: Print: Magnif.=NONE, Available=On, Title=8x10 in. n Options: Print: Width=2136, Height=2736, Pixel Size=85 n Make an ECHO test, just to verify that the DICOM connection is working ok n in order to print into Patient File / Print Layout: n a) into Print / Print Setup Menu: n select Name=8300 Landscape, Size=8x10, Add to Format menu=On n Black&White=On, Color=Off, Bits per pixel=8, Background Color=Black n Zoom=100, Copies=1, Trim around Image=Off, Trim around Division=On n b) into Image/Zoom: FitToWindow=On (for True Size, FixedZoom100%=On) n into Image: Annotations and Measurements=On, Measurement Scale=On n into Image: DICOM informations=On, DICOM Overlays=On n c) into Format: 1. 8x10 on 8300 Landscape=On, Show Footer=On n d) into Layout select the appropriate icon between the predifined ones n e) into Orientation select Landscape=On (note: Portrait selection will not work) MIM200 Setup: n on Configure, Network:
n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, 8300, Set: n General: Log.Name=8300 n General: Database Name=8300, Model=8300, Memory=32 n Media Info: Media=8x10in, 2256x2676, 2596, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=8, Header/Line, Transfer=2000 KHz, Acquire=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symm.=On, SuperSlide=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=11.9048
Kodak workstation MasterPage with LASER IMAGER Products
Author: [email protected], Edition: May ´05 36
n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3 n M952 Usage: Min H/V Mag=1, Max H/V Mag=16, Min Dmax 952=1.5
n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT= a) wrkstn83a.w8u or b) u1_109b.w8u (Always=Y) n Contrast (dry)= a) 1 or b) 10 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n Smoothing Type=1 (Always=N), Image Polarity=Normal (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Minify/Scale=On, Crop=Off, Text Box Relocation=None n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n Film Base=Blue Film (Always=N), Film Size=8INx10IN (Always=N) n Negotiate Color Print=Off
8300 Setup: n on Operator Menu set: D=16, C=6, Sharp/Smooth=0 ie Auto n on Operator Menu set: Film Layout: 1 on 1=Portrait n on Service Menu set: Ratio=1.00, Serial=1200,8,1,Even,Comma,3M, Memory=16 n on Service Menu set: Digital Interface: Parity=Even, Modality Group=1
Kodak workstation MasterPage with LASER IMAGER Products
Author: [email protected], Edition: May ´05 37
Kodak MasterPage via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8610 LASER IMAGING SYSTEM / for Mammography
(see also 8600)
Requirements: MasterPage v8.0 Requirements: MIM200 v6.1, 8610 v2.4 (if 8600 v2.5) Note: This setup is basically also valid for 25 PS computer Note: This setup is basically also valid for 8600 camera Note: Mod.Group, Contrast, Gamma into Kodak camera to be configured differently
if images that have to be printed from MasterPage are either a) Kodak CR images or b) CT/MR images
- a) Kodak CR images are already lutted by Kodak CR, not lutted by MasterPage, Linear-in-Density LUT into Camera ie Mod.Group=1, C=1, Gamma=Lin.Density
- b) CT/MR images are not lutted by CT/MR, not lutted by MasterPage, lutted by Camera ie Mod.Group=6, C=3, Gamma=Lin.Transmittance
Note: if from MasterPage both typeof images have to be printed, define on MasterPage 2 printers with same IP and Port but different AEtitles
MasterPage Setup: n on Communication->Directory->Add Menu: n Name=DryView, Connection Type=DICOM, IP Address=accordingly n DICOM: Port=5040, Called AE Title=8610, Calling AE Title=MasterPage n DICOM: Supp.Services: Store=Off, Print=On, Query/Retrieve=Off, Worklist=Off n Options: Print: Magnif.=NONE, Available=On, Title=8x10 in. n Options: Print: Width=5024, Height=6200, Pixel Size=39 n Make an ECHO test, just to verify that the DICOM connection is working ok n in order to print into Patient File / Print Layout: n a) into Print / Print Setup Menu: n select Name=DryView, Size=8x10, Add to Format menu=On n Black&White=On, Color=Off, Bits pixel=12 (8 if 8600), Background Color=Black n Zoom=100, Copies=1, Trim around Image=Off, Trim around Division=On n b) into Image/Zoom: FitToWindow=On (for True Size, FixedZoom100%=On) n into Image: Annotations and Measurements=On, Measurement Scale=On n into Image: DICOM informations=On, DICOM Overlays=On
KodakMasterPage Workstation
Kodak DryView 8610
Kodak MIM 200
DICOM Network
Control 9 pin
Data 37 pin
COPCIL board Copper Cable
Kodak workstation MasterPage with LASER IMAGER Products
Author: [email protected], Edition: May ´05 38
n c) into Format: 1. 8x10 on DryView=On, Show Footer=On n d) into Layout select the appropriate icon between the predifined ones n e) into Orientation eg Portrait=On MIM200 Setup: n on Configure, Network:
n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, 8610 (or 8600), Set: n General: Log.Name=8610 (or 8600) n General: Database=8610 (or 8600), Model=8610 (or 8600), Memory=32 n Media Info: Media=8x10in, 5025x6200, 6020, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=12 (8 if 8600), Header/Line,Transfer=2000,Acq=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=25.8065 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.5 n M952 Usage: Min H/V Mag=0.26, Max H/V Mag=16, Min Dmax 952=2
n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n Contrast (dry)=a) 6 or b) 3 (Always=N), Modality Group=a) 1 or b) 6, n Conv.Group=1, Gamma Table=Linear in a) Density or b) Transmittance n Image Dmin=0.00 (Always=N), Image Dmax=3.50 (Always=N) n Smoothing Type=1 (Always=Y), Image Polarity=Normal (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Minify/Scale=On, Crop=Off, Text Box Relocation=None (Always=N) n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n Film Base=Blue Film (Always=N), Film Size=8INx10IN (Always=N) n Negotiate Color Print=Off
8610 Setup: on 8610 Operator Menu into Test Menu, Software Version, verify: n Imager=2.4, VRTX32=1.08, Contrast=6.P.2, Conv.Kernel=M.1.0 n (if 8600: Imager=2.5, Contrast=6.G.7, Conv.Kernel=1.0.5)
Kodak workstation MasterPage with LASER IMAGER Products
Author: [email protected], Edition: May ´05 39
n on 8610 Operator Menu into Configure User set: n Density=16, Contrast=6, Sharp/Smooth=1, Film Layout: 1:1P n Gamma=Xmittance, Image Size=Scale To Fit, Detector Size=don’t care n on 8610 Service Menu into Configure User set:
n Ratio=1.00, Serial Control Intf.=1200,8,1,Even,Comma,3M, Memory=255 n Digital Interface: Parity=Even, Modality Group=1, Smoothing Group=1
Kodak workstation MasterPage with LASER IMAGER Products
Author: [email protected], Edition: May ´05 40
Kodak MasterPage via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /
Kodak Digital Science 969 HQ LASER IMAGER
Requirements: MasterPage v8.0 Requirements: MIM200 v6.1, 969 v5.2 Note: other HQ matrixes 11x14=3020x3960, 8x10=2076x2788 Note: This setup is basically also valid for 25 PS computer Note: the TFT and Contrast into Kodak camera have to be configured differently
if images that have to be printed from MasterPage are either a) Kodak CR images or b) CT/MR images
- a) Kodak CR images are already lutted by Kodak CR, not lutted by MasterPage, Linear-in-Density LUT into Camera ie TFT= WRKSTN2A, C=2
- b) CT/MR images are not lutted by CT/MR, not lutted by MasterPage, lutted by Camera ie TFT=VER693C0, C=6
Note: if from MasterPage both typeof images have to be printed, define on MasterPage 2 printers with same IP and Port but different AEtitles
MasterPage Setup: n on Communication->Directory->Add Menu: n Name=DryView, Connection Type=DICOM, IP Address=accordingly n DICOM: Port=5040, Called AE Title=969, Calling AE Title=MasterPage n DICOM: Supp.Services: Store=Off, Print=On, Query/Retrieve=Off, Worklist=Off n Options: Print: Magnif.=NONE, Available=On, Title=14x17 in. n Options: Print: Width=4096, Height=4992, Pixel Size=82 n Make an ECHO test, just to verify that the DICOM connection is working ok n in order to print into Patient File / Print Layout: n a) into Print / Print Setup Menu: n select Name=DryView, Size=14x17, Add to Format menu=On n Black&White=On, Color=Off, Bits per pixel=12, Background Color=Black n Zoom=100, Copies=1, Trim around Image=Off, Trim around Division=On n b) into Image/Zoom: FitToWindow=On (for True Size, FixedZoom100%=On) n into Image: Annotations and Measurements=On, Measurement Scale=On n into Image: DICOM informations=On, DICOM Overlays=On n c) into Format: 1. 14x17 on DryView=On, Show Footer=On n d) into Layout select the appropriate icon between the predifined ones
Kodak M969 HQKodak MIM 200
DICOM Network
Fiber Cable
Fiber Cable
3 M H Q L a s e r I m a g e r
Kodak MasterPage Workstation
Kodak workstation MasterPage with LASER IMAGER Products
Author: [email protected], Edition: May ´05 41
n e) into Orientation eg Portrait=On MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr,Subnet Mask,Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 969, Set: n General: Log.Name=969 n General: Database Name=969, Model=969, Memory=32 n Media Info: Media=35x43cm, 4096x5002, 4912, Blue n Media Info: Media= 11x14in, 3030x4096, 4006, Blue n Media Info: Media= 8x10in, 2086x2929, 2839, Blue n Output Params: Cmd=SuperSet,Baud=19200,Data=8,Stop=1,Parity=None n Output Params: Pixel=12, Header/Line, Transfer=2000 KHz, Acq=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=6 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.3457 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0.26, Max H/V Mag=64, Min Dmax 952=1.7 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT= a) Wrkstn2a.w87 or b) Ver693c0.w87 (Always=N) n Contrast (dry)= a) 2 or b) 6 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n Smoothing Type=0 (Always=N), Image Polarity=Normal (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Minify/Scale=On, Crop=Off, Text Box Relocation=None n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N) n Negotiate Color Print=Off 969 Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=12, Header/Line, Port=0, Parity=Enable Even, Timeout=60
Kodak workstation MasterPage with LASER IMAGER Products
Author: [email protected], Edition: May ´05 42
Kodak MasterPage via DICOM with Kodak DryView 8900 LASER IMAGER
Requirements: MasterPage v8.0 Requirements: 8900 rev.E ie rel.2.11 (ie DRE v2.11, MIM v5.6.b5, MCS v2.10) Note: other 8900 matrixes 14x14=4488x4488, 11x14=3512x4488 Note: other 8900 matrixes 10x12=3184x3828, 8x10=2528x3184 Note: into MP another printer should be declared to print 10x12 on 8900 with: Name=MP10x12, Calling AE Title=MP10x12
Options: Print: Magnif.=REPLICATE, Available=On, Title=14x14 in. Options: Print: Width=3184, Height=3828, Pixel Size=78. Into 8900 Config., DICOM SCP, SCP Services, select MP10x12 modality, Modify: Film Size=10INx12IN (Always=Y), all other 8900 settings as below
Note: the TFT and Contrast into Kodak camera have to be configured differently
if images that have to be printed from MasterPage are either a) Kodak CR images or b) CT/MR images
- a) Kodak CR images are already lutted by Kodak CR, not lutted by MasterPage, Linear-in-Density LUT into Camera ie TFT= WRKSTN2A, C=2
- b) CT/MR images are not lutted by CT/MR, not lutted by MasterPage, lutted by Camera ie TFT=VER693C0, C=6
Note: if from MasterPage both typeof images have to be printed, define on MasterPage 2 printers with same IP and Port but different AEtitles
MasterPage Setup: n on Communication->Directory->Add Menu: n Name=DryView, Connection Type=DICOM, IP Address=accordingly n DICOM: Port=5040, Called AE Title=8900, Calling AE Title=MasterPage n DICOM: Supp.Services: Store=Off, Print=On, Query/Retrieve=Off, Worklist=Off n Options: Print: Magnif.=REPLICATE, Available=On, Title=14x17 in. n Options: Print: Width=4488, Height=5464, Pixel Size=78 n Make an ECHO test, just to verify that the DICOM connection is working ok n in order to print into Patient File / Print Layout: n a) into Print / Print Setup Menu: n select Name=DryView, Size=14x17, Add to Format menu=On n Black&White=On, Color=Off, Bits per pixel=12, Background Color=Black
KodakMasterPage Workstation
DICOM Network
Kodak DryView 8900
Kodak workstation MasterPage with LASER IMAGER Products
Author: [email protected], Edition: May ´05 43
n Zoom=100, Copies=1, Trim around Image=Off, Trim around Division=On n b) into Image/Zoom: FitToWindow=On (for True Size, FixedZoom100%=On) n into Image: Annotations and Measurements=On, Measurement Scale=On n into Image: DICOM informations=On, DICOM Overlays=On n c) into Format: 1. 14x17 on DryView=On, Show Footer=On n d) into Layout select the appropriate icon between the predifined ones n e) into Orientation eg Portrait=On 8900 Setup: n on Configuration, System, Network: n Host Name=DV8900, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configuration, DICOM SCP, Communications:
n Port=5040, Association Limit=12, Source Name=DICOM n on Configuration, Destination:
n General: Log.Name=8900 n Media Types: Media=35x43cm, 9100x11037, 10781, Any n Media Types: Media=35x35cm,9100x9087, 8831, Any n Media Types: Media=11x14in, 7137x9100, 8844, Any n Media Types: Media=10x12in, 6490x7767, 7511, Any
n Media Types: Media=8x10in, 5167x6490, 6234, Any n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On n Formatting: DICOM Annotation Box=On, Req.Image Size=On n Formatting: Req.Size Scale=On, Req.Size Mix Page=On n Formatting: Req.Size Mix Row=On, Trim=On, n Formatting: True Landscape=On, Rotation=On n Formatting: Minify/Crop=On, Tonescaling on Image Basis=On n Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0 n Formatting: Max Img Rows=0, Pixel Pitch=25.5910, Min Horiz Sep=4 n Formatting: Min Vert Sep=4, Trim Width Enabled=4 n Formatting: Trim Width Disabled=0, Maximum DMAX=3.30
n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify: n Negotiate Presentation LUT=No, Negotiate Color Print=No n TFT/ULUT= a) Wrkstn2a.w87 or b) Ver693c0.w87 (Always=Y) n Contrast= a) 2 or b) 6 (Always=Y) n Smoothing Type=0 (Always=Y), Image Polarity (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=No (Always=Y), Warnings=Yes n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n 2mm Border=Yes, Film Clip Border=No, Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Sorter Bin=Bin1 (Always=N) n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No n Modality ID=No, Annotation Override=No, Density Patch=No n Image Resizing=Minify/Scale (Always=N), n Text Box Location=None, Source ID=mp
Kodak workstation MasterPage with LASER IMAGER Products
Author: [email protected], Edition: May ´05 44
Kodak MasterPage via DICOM with Kodak DryView 8150 LASER IMAGER
Requirements: MasterPage v8.0 Requirements: 8150 v0.08.b6 (DRE=DV8150_DRE_0.08.b6, MIM=MIM_v5.7.b6) Note: other 8150 matrixes 14x14=4438x4414, 11x14=3440x4438 Note: the TFT and Contrast into Kodak camera have to be configured differently
if images that have to be printed from MasterPage are either a) Kodak CR images or b) CT/MR images
- a) Kodak CR images are already lutted by Kodak CR, not lutted by MasterPage, Linear-in-Density LUT into Camera ie TFT= WRKSTN2A, C=1
- b) CT/MR images are not lutted by CT/MR, not lutted by MasterPage, lutted by Camera ie TFT=VER693C0, C=6
Note: if from MasterPage both typeof images have to be printed, define on MasterPage 2 printers with same IP and Port but different AEtitles
MasterPage Setup: n on Communication->Directory->Add Menu: n Name=DryView, Connection Type=DICOM, IP Address=accordingly n DICOM: Port=5040, Called AE Title=DV8150, Calling AE Title=MasterPage n DICOM: Supp.Services: Store=Off, Print=On, Query/Retrieve=Off, Worklist=Off n Options: Print: Magnif.=REPLICATE, Available=On, Title=14x17 in. n Options: Print: Width=4438, Height=5390, Pixel Size=78 n Make an ECHO test, just to verify that the DICOM connection is working ok n in order to print into Patient File / Print Layout: n a) into Print / Print Setup Menu: n select Name=DryView, Size=14x17, Add to Format menu=On n Black&White=On, Color=Off, Bits per pixel=12, Background Color=Black n Zoom=100, Copies=1, Trim around Image=Off, Trim around Division=On n b) into Image/Zoom: FitToWindow=On (for True Size, FixedZoom100%=On) n into Image: Annotations and Measurements=On, Measurement Scale=On n into Image: DICOM informations=On, DICOM Overlays=On n c) into Format: 1. 14x17 on DryView=On, Show Footer=On n d) into Layout select the appropriate icon between the predifined ones n e) into Orientation eg Portrait=On
Kodak MasterPage Workstation
DICOM Network
Kodak DryView 8150
Kodak workstation MasterPage with LASER IMAGER Products
Author: [email protected], Edition: May ´05 45
8150 Setup: n on Configuration, System, Network: n Host Name=DV8150DRE, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configuration, DICOM SCP, Communications:
n Port=5040, Association Limit=12, Source Name=DICOM n on Configuration, Destination:
n AE Title: Log.Name=DV8150 n Media Types: Media=35x43cm, 4438x5390, 5262, Any n Media Types: Media=35x35cm, 4438x4414,4286, Any n Media Types: Media=11x14in, 3440x4438, 4310, Any n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On n Formatting: DICOM Annotation Box=On, Req.Image Size=On n Formatting: Req.Size Scale=On, Req.Size Mix Page=On n Formatting: Req.Size Mix Row=On, Trim=On, n Formatting: True Landscape=On, Rotation=On n Formatting: Minify/Crop=On, Tonescaling on Image Basis=On n Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0 n Formatting: Max Img Rows=0, Pixel Pitch=12.8000, Min Horiz Sep=2 n Formatting: Min Vert Sep=2, Trim Width Enabled=2 n Formatting: Trim Width Disabled=0, Maximum DMAX=3.10
n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify: n Negotiate Presentation LUT=No, Negotiate Color Print=No, n TFT Set Name=a) Wrkstn2a.w87 or b) Ver693c0.w87 (Always=Y) n Contrast=a) 1 or b) 6 (Always=N), Smoothing Type=0 (Always=N) n Dmin=0.00 (Always=N), Dmax=3.00 (Always=N) n Image Polarity=Normal (Always=N) n NeventReports=No (Always=Y), Warnings=Yes n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n 2mm Border=Yes, Film Clip Border=No, n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N) n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No, n Modality ID=No, Annotation Override=No, Density Patch=No n Image Resizing=Minify/Scale (Always=N), n Text Box Location=None, Source ID=ws
Kodak workstation MasterPage with LASER IMAGER Products
Author: [email protected], Edition: May ´05 46
Kodak MasterPage via DICOM with Kodak Color Medical Imager 1000
Requirements: MasterPage v8.0 Requirements: CMI-1000 v1.0.b8 (DRE=v1.0.b8, MIMCore=v2.0.b3) Note: the TFT and Contrast into Kodak camera have to be configured differently
if images that have to be printed from MasterPage are either a) Kodak CR images or b) CT/MR images
- a) Kodak CR images are already lutted by Kodak CR, not lutted by MasterPage, Linear-in-Density LUT into Camera ie TFT= WRKSTN2A, C=7
- b) CT/MR images are not lutted by CT/MR, not lutted by MasterPage, lutted by Camera ie TFT=VER693C0, C=6
Note: if from MasterPage both typeof images have to be printed, define on MasterPage 2 printers with same IP and Port but different Aetitles
MasterPage Setup: n on Communication->Directory->Add Menu: n Name=CMI1000, Connection Type=DICOM, IP Address=accordingly n DICOM: Port=5040, Called AE Title=CMI1000, Calling AE Title=MasterPage n DICOM: Supp.Services: Store=Off, Print=On, Query/Retrieve=Off, Worklist=Off n Options: Print: Magnif.=REPLICATE, Available=On, Title=8x10 in. n Options: Print: Width=2508, Height=3134 if A4 (or 2954 if Letter), Pixel Size=81 n Make an ECHO test, just to verify that the DICOM connection is working ok n in order to print into Patient File / Print Layout: n a) into Print / Print Setup Menu: n select Name=CMI1000, Size=8x10, Add to Format menu=On n Black&White=Off, Color=On, Bits per pixel=8, Background Color=Black n Zoom=100, Copies=1, Trim around Image=Off, Trim around Division=On n b) into Image/Zoom: FitToWindow=On (for True Size, FixedZoom100%=On) n into Image: Annotations and Measurements=On, Measurement Scale=On n into Image: DICOM informations=On, DICOM Overlays=On n c) into Format: 1. 8x10 on CMI1000=On, Show Footer=On n d) into Layout select the appropriate icon between the predifined ones n e) into Orientation eg Portrait=On CMI-1000 Setup: at Local Panel, under Media, set A4 or Letter ie what inside Paper Tray
Kodak MasterPage Workstation
DICOM Network
Kodak CMI 1000
Kodak workstation MasterPage with LASER IMAGER Products
Author: [email protected], Edition: May ´05 47
(CMI-1000 sw considers only this field and uses it as A4 or Letter (Always=Y): at Local Panel, under Menu, Imager Setup: n Network Setup: n IPAddr=accordingly, Subnet Mask=accordingly, Gateway=accordingly n under More Settings: DICOM Port=5040 n Edit Host Name/AE Title=CMI1000 n Modality (SCU) Config (or after modality recognition): n Select Modality=accordingly, Modality Config.Assistant=Yes, Reset Config=No n Note: Color IQ settings used when images sent with Color DICOM SOP n under Image Quality, Color Image Quality: (no need to adjust, leave defaults)
n Match Monitor Colors=default ie sRGB Color Space Profile.icm n Adjust Color Tones=default ie Default_Contrast_100.icm
n Note: Grayscale IQ settings used when images sent with Grayscale DICOM SOP: n under Image Quality, Grayscale Image Quality:
n Contrast=a) 7 or b) 6 (Always=Y) n TFT Set (From list)=a) Wrkstn2a.w87 or b) Ver693c0.w87 (Always=Y) n Wet Contrast=0 (Always=N), Curve Shape=429 (Always=N) n under More Quality Settings: n Tonescaling=Presentation LUT (Always=N), n Image Dmax=220 (Always=N), Image Dmin=10 (Always=N) n Smoothing=0 (Always=N), Polarity=Positive (Always=N) n Interpolation=CUBIC (Always=N), Trim=No (Always=N) n Page Orientation=PORTRAIT (Always=N), Negotiate PLUT=No
n under Modality Defaults: n Media Size=8.5x11 (Always=N), don’t care, this field plays no role n Image Resizing=Minify (Always=N), n Priority=Normal (Always=N), NeventReports=No (Always=Y), n Warnings=Yes, Color=Yes n (set Color=No when only b/w images are printed and set it to be sure n to apply to the b/w images the Greyscale Image Quality settings) n Page Annotation: n Hosp.Name=No, Modality ID=No, Page Nbr=No, Date=No, Time= No
n Save Changes and Exit
Kodak workstation MedView with LASER IMAGER Products
Author: [email protected], Edition: May ´05 1
Tentative Setup for Kodak workstation MedView with LASER IMAGERS Connection via DICOM: n Kodak DryView 8300 LASER IMAGER......................................................................... 2 n Kodak Digital Science 190 MEDICAL LASER PRINTER......................................... 3 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /
Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual, 8500 Plus, 8800/8500 Dual and HQ) .................................... 4
n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8100 LASER IMAGER......................................................................... 6
n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8300 LASER IMAGER......................................................................... 8
n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 160 LASER IMAGER .......................................................................... 10
n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 2180 LASER PRINTER ....................................................................... 12
n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 1120 LASER PRINTER ....................................................................... 14
n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 (1) / Kodak DryView 8200 LASER IMAGER......................................................................... 16
n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 (1) / Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual, 8500 Plus, 8800/8500 Dual and HQ) .................................... 18
n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 (1) / Kodak DryView 8100 LASER IMAGER......................................................................... 20
n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 (1) / Kodak DryView 8300 LASER IMAGER......................................................................... 22
n Kodak DryView 8900 LASER IMAGER......................................................................... 24 n Kodak DryView 8150 LASER IMAGER......................................................................... 26 n Kodak Color Medical Imager 1000 ................................................................................. 28
1 setup valid also for Kodak PACS LINK 25 PRINT SERVER.
Kodak workstation MedView with LASER IMAGER Products
Author: [email protected], Edition: May ´05 2
Kodak MedView via DICOM with Kodak DryView 8300 LASER IMAGER
Requirements: MedView v2.1 Requirements: 8300 v4.9.1, 8300 DICOM board v3.3, 8300 LUT v3.0.3B Note: Image Data not lutted by MedView, lutted by Camera MedView Setup: n on Print->Destinations->Add Menu: n General: Class=DICOM Printer, Name=DryView n DICOM: AE Title=8300, Host Name=IP-Address of 8300 n DICOM: Port=104, Destination=Processor, Enable Print Job Events=Off n DICOM: Compose Sheet=Off, BFS Print Support=Off n DICOM film: Magnif.=Cubic, Medium=Blue Film, Smoothing=0 n DICOM film: Config Info= LUT=0,10, Border=Black, MaxDensity=300 n DICOM media: 8INx10IN n Layouts: 1,1; 1,2; 2,2; 2,3 n Image: Min.Bitmap Size=256, Bit Depth=8, Orig.Size=Off, Color=Monochrome 8300 Setup: n on 8300 Operator Menu into Configure User set: n Density=16, Contrast=10, Sharp/Smooth=0 ie Auto n on 8300 Service Menu into Configure User set: Modality Group=0
Kodak DryView 8300
DICOM Network
Kodak MedViewWorkstation
Kodak workstation MedView with LASER IMAGER Products
Author: [email protected], Edition: May ´05 3
Kodak MedView via DICOM with Kodak Digital Science 190 MEDICAL LASER PRINTER
Requirements: MedView v2.1 Requirements: 190 rel. 1.7.29 Note: Image Data not lutted by MedView, lutted by Camera MedView Setup: n on Print->Destinations->Add Menu: n General: Class=DICOM Printer, Name=K190 n DICOM: AE Title=190, Host Name=IP-Address of 190 n DICOM: Port=5040, Destination=Processor, Enable Print Job Events=Off n DICOM: Compose Sheet=Off, BFS Print Support=Off n DICOM film: Magnif.=Cubic, Medium=Blue Film, Smoothing=Normal n DICOM film: Config Info=CS435\CN0\PD1.2, Border=Black, MaxDensity=300 n DICOM media: 14INx17IN n Layouts: 1,1; 1,2; 2,2; 2,3; 3,3; 3,4; 3,5; 4,4; 4,5 n Image: Min.Bitmap Size=256, Bit Depth=8, Orig.Size=Off, Color=Monochrome 190 Setup: n On 190 Control Panel press Menu, Setup: n Printer Density=3.00, Curve Shape=3.0, Contrast=0, Contrast Pivot Density=1.2 n IPAddress=accordingly, Subnet Mask=accordingly, Gateway Address=accordingly n Port=5040, Network Node Name=Kodak MLP190, Connection Type=RJ45
DICOM Network
Kodak 190 cameraKodak MedViewWorkstation
Kodak workstation MedView with LASER IMAGER Products
Author: [email protected], Edition: May ´05 4
Kodak MedView via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /
Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual, 8500 Plus, 8800/8500 Dual and HQ)
Requirements: MedView v2.1 Requirements: 9410 v1.6, 8700 v1.34 Note: Image Data not lutted by MedView, lutted by Camera Note: This setup is basically also valid for 8800/8700 Dual, 8500 Plus,
8800/8500 Dual and HQ cameras by basically using the correspondent Model into 9410 Local Printers
MedView Setup: n on Print->Destinations->Add Menu: n General: Class=DICOM Printer, Name=DryView n DICOM: AE Title=9410, Host Name=IP-Address of 9410 n DICOM: Port=1024, Destination=Processor, Enable Print Job Events=Off n DICOM: Compose Sheet=Off, BFS Print Support=Off n DICOM film: Magnif.=Cubic, Medium=Blue Film, Smoothing=2 n DICOM film: Config Info= LUT=0,9, Border=Black, MaxDensity=300 n DICOM media: 14INx17IN (11INx14IN if 8500) n Layouts: 1,1; 1,2; 2,2; 2,3; 3,3; 3,4; 3,5; 4,4; 4,5 n Image: Min.Bitmap Size=256, Bit Depth=8, Orig.Size=Off, Color=Monochrome 9410 Setup: n on Device Setup, LOCAL PRINTERS:
n Printer=8700, Model=8700, Output=Fiber n Command Set=Superset, Baud=19200, Data=8, Stop=1, Parity=None n Pixel=12, Header/Line, Timeout=60, Transfer Rate=2 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87
n on Device Setup, SCP PRINTERS, Current Providers: n Printer=8700, AE Title= 9410, Port= 1024, Max Associations= 5 n on Device Setup, SCP PRINTERS, Registered Users:
Kodak DryView 8700 Plus
Kodak 9410 PACS Link
DICOM Network
3M8700 DryViewFiber Cable
Fiber Cable
Kodak MedViewWorkstation
Kodak workstation MedView with LASER IMAGER Products
Author: [email protected], Edition: May ´05 5
n SCU AETitle= accordingly, SCU IPAddr=accordingly n SCP=8700, Copies=1, Contrast Table=9, TFT/ULUT=Pmsv3k.w87 n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=2 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=No, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0
8700 Plus Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=12, Header/Line, Parity=Enable Even, Port=0, Timeout=60
Kodak workstation MedView with LASER IMAGER Products
Author: [email protected], Edition: May ´05 6
Kodak MedView via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /
Kodak DryView 8100 LASER IMAGER
Requirements: MedView v2.1 Requirements: 9410 v1.6, 8100 v2.4.1 Note: Image Data not lutted by MedView, lutted by Camera MedView Setup: n on Print->Destinations->Add Menu: n General: Class=DICOM Printer, Name=DryView n DICOM: AE Title=9410, Host Name=IP-Address of 9410 n DICOM: Port=1024, Destination=Processor, Enable Print Job Events=Off n DICOM: Compose Sheet=Off, BFS Print Support=Off n DICOM film: Magnif.=Cubic, Medium=Blue Film, Smoothing=2 n DICOM film: Config Info= LUT=0,9, Border=Black, MaxDensity=300 n DICOM media: 14INx17IN n Layouts: 1,1; 1,2; 2,2; 2,3; 3,3; 3,4; 3,5; 4,4; 4,5 n Image: Min.Bitmap Size=256, Bit Depth=8, Orig.Size=Off, Color=Monochrome 9410 Setup: on Device Setup, LOCAL PRINTERS: n Printer=8100, Model=8100 4096 pxls/line, Output=Copper n Baud=1200, Parity=Even, Data=8, Stop=1, Command Set=952 n Pixel=12, Header/Line, Timeout=60, Transfer Rate=1 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87 on Device Setup, SCP PRINTERS, Current Providers: n Printer=8100, AE Title= 9410, Port= 1024, Max Associations= 5 on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle= accordingly, SCU IPAddr=accordingly n SCP=8100, Copies=1, Contrast Table=9, TFT/ULUT=Pmsb.w87 n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=2 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No
Kodak DryView 8100Kodak 9410 PACS Link
DICOM Network
COPCIL BoardCopper Cable Control 9-pin
Data 37-pin
RS4229-pole Plug
Kodak MedViewWorkstation
Kodak workstation MedView with LASER IMAGER Products
Author: [email protected], Edition: May ´05 7
n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0 8100 Setup on CONFIGURATION Menu: n on SIB board (ie external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=90, P1,…,P6=0
n on IMAGE QLTY-> Mag Scaling=Off, Pixel Correct=Off, 952 Override=Off n on IMAGE QUALITY-> TFT FILES Menu: TFT=Ver693c0.w87 n on LOCAL PANEL Menu: Contrast=6, Density=3.00 n on SYSTEM Menu: Acquire=Digital, Max.Img.Columns=4361 n on DIGITAL Menu: Pixel Depth=12, Header/Line, Parity=Even
Kodak workstation MedView with LASER IMAGER Products
Author: [email protected], Edition: May ´05 8
Kodak MedView via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /
Kodak DryView 8300 LASER IMAGER
Requirements: MedView v2.1 Requirements: 9410 v1.6, 8300 v4.9.1, 8300 LUT v3.0.3B Note: Image Data not lutted by MedView, lutted by Camera MedView Setup: n on Print->Destinations->Add Menu: n General: Class=DICOM Printer, Name=DryView n DICOM: AE Title=9410, Host Name=IP-Address of 9410 n DICOM: Port=1024, Destination=Processor, Enable Print Job Events=Off n DICOM: Compose Sheet=Off, BFS Print Support=Off n DICOM film: Magnif.=Cubic, Medium=Blue Film, Smoothing=0 n DICOM film: Config Info= LUT=0,10, Border=Black, MaxDensity=300 n DICOM media: 8INx10IN n Layouts: 1,1; 1,2; 2,2; 2,3 n Image: Min.Bitmap Size=256, Bit Depth=8, Orig.Size=Off, Color=Monochrome 9410 Setup: n on Device Setup, LOCAL PRINTERS:
n Printer=8300, Model=8300 Copper, Output=Copper n Command Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Pixel=8, Header/Line, Timeout=60, Transfer Rate=1 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=0, Max.Density=300, Contrast=6, Border Density=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=upmsv3k.w8u
n on Device Setup, SCP PRINTERS, Current Providers: n Printer=8300, AE Title= 9410, Port= 1024, Max Associations= 5 n on Device Setup, SCP PRINTERS, Registered Users:
n SCU AETitle= accordingly, SCU IPAddr=accordingly n SCP=8300, Copies=1, Contrast Table=10, TFT/ULUT=u1_109b.w8u n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=0 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low
Kodak DryView 8300Kodak 9410 PACS Link
DICOM Network
Control 9 pin
Data 37 pin
COPCIL board Copper Cable
Kodak MedViewWorkstation
Kodak workstation MedView with LASER IMAGER Products
Author: [email protected], Edition: May ´05 9
n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0
8300 Setup: n on Operator Menu set: D=16, C=6, Sharp/Smooth=0 ie Auto n on Operator Menu set: Film Layout: 1 on 1=Portrait n on Service Menu set: Ratio=1.00, Serial=1200,8,1,Even,Comma,3M, Memory=16 n on Service Menu set: Digital Interface: Parity=Even, Modality Group=1
Kodak workstation MedView with LASER IMAGER Products
Author: [email protected], Edition: May ´05 10
Kodak MedView via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /
Kodak Ektascan 160 LASER IMAGER
Requirements: MedView v2.1 Requirements: MIM200 v6.1, KELI 160 v7.2 Note: Image Data not lutted by MedView, lutted by Camera MedView Setup: n on Print->Destinations->Add Menu: n General: Class=DICOM Printer, Name=K160 n DICOM: AE Title=160, Host Name=IP-Address of MIM200 n DICOM: Port=5040, Destination=Processor, Enable Print Job Events=Off n DICOM: Compose Sheet=Off, BFS Print Support=Off n DICOM film: Magnif.=Cubic, Medium=Blue Film, Smoothing=Normal n DICOM film: Config Info=CS435\CN0\PD1.2, Border=Black, MaxDensity=300 n DICOM media: 14INx17IN n Layouts: 1,1; 1,2; 2,2; 2,3; 3,3; 3,4; 3,5; 4,4; 4,5 n Image: Min.Bitmap Size=256, Bit Depth=8, Orig.Size=Off, Color=Monochrome MIM200 Setup: n on Configure, Network: n Computer Name=eg Kodak160, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, KELI 160, Set:
n General: Log.Name=KELI 160, IPAddr=100.100.100.30, n General: Database Name=KELI 160, Model=KELI 160 n Media Info: Media=35x43cm, 4361x5348, 5228, Any (Blue,Clear) n Supported Item: Collation=On, Text=On, Tonescaling on Image=On n Supported Item: Pivot Density=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On
Kodak MIM 200
DICOM Network
CrossedNetwork Cable
Kodak 160 cameraKodak MedViewWorkstation
Kodak workstation MedView with LASER IMAGER Products
Author: [email protected], Edition: May ´05 11
n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8 n Image Processing: Grayscale=On, Minify/Crop=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7
n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape= 3 ie 435 (Always=N), Contrast (wet)=0 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n Interpolation=Cubic, Image Polarity=Normal (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Minify/Scale=On, Crop=Off, Text Box Relocation=None (Always=N) n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N) n Negotiate Color Print=Off
160 Setup: no modality-specific setup needed
Kodak workstation MedView with LASER IMAGER Products
Author: [email protected], Edition: May ´05 12
Kodak MedView via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /
Kodak Ektascan 2180 LASER PRINTER
Requirements: MedView v2.1 Requirements: MIM200 v6.1, 2180 rel. 2.17H Note: Image Data not lutted by MedView, lutted by Camera MedView Setup: n on Print->Destinations->Add Menu: n General: Class=DICOM Printer, Name=K2180 n DICOM: AE Title=2180, Host Name=IP-Address of MIM200 n DICOM: Port=5040, Destination=Processor, Enable Print Job Events=Off n DICOM: Compose Sheet=Off, BFS Print Support=Off n DICOM film: Magnif.=Cubic, Medium=Blue Film, Smoothing=Normal n DICOM film: Config Info=CS435\CN0\PD1.2, Border=Black, MaxDensity=300 n DICOM media: 14INx17IN, 14INx14IN, 11INx14IN, 8INx10IN n Layouts: 1,1; 1,2; 2,2; 2,3; 3,3; 3,4; 3,5; 4,4; 4,5 n Image: Min.Bitmap Size=256, Bit Depth=8, Orig.Size=Off, Color=Monochrome MIM200 Setup: n on Configure, Network: n Computer Name=eg Kodak2180, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, KELP 2180, Set:
n General: Log.Name=KELP2180, Database Name=KELP 2180 n General: Model=KELP 2180, Memory=24, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4136x5160, 5030, (Blue) n Media Info:Media=35x35cm,4136x4136,4006, (Blue) n Media Info: Media=11x14in, 3240x4136, 4006, (Blue) n Media Info: Media=8x10in, 2290x2840, 2710, (Blue) n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On
Kodak MIM 200
DICOM Network
Fiber Cable
Kodak 2180 cameraKodak MedViewWorkstation
Kodak workstation MedView with LASER IMAGER Products
Author: [email protected], Edition: May ´05 13
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=2 n Formatting: Pixel Pitch=12.6582 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7
n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape= 3 ie 435 (Always=Y), Contrast (wet)=0 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Minify/Scale=On, Crop=Off, Text Box Relocation=None n Print Priority=Normal (Always=N), Border=Black (Always=N) n Interpolation=Cubic, Border Dmax=3.99 n Film Size=14INx17IN (Always=N), Film Output Dest=Bin 9 (Always=N) n Negotiate Color Print=Off
2180 Setup: n Optical Interface board will automatic configure into 2180, no setup needed
Kodak workstation MedView with LASER IMAGER Products
Author: [email protected], Edition: May ´05 14
Kodak MedView via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /
Kodak Ektascan 1120 LASER PRINTER
Requirements: MedView v2.1 Requirements: MIM200 v6.1, 1120 rel. 2.40/032 Note: Image Data not lutted by MedView, lutted by Camera MedView Setup: n on Print->Destinations->Add Menu: n General: Class=DICOM Printer, Name=K1120 n DICOM: AE Title=1120, Host Name=IP-Address of MIM200 n DICOM: Port=5040, Destination=Processor, Enable Print Job Events=Off n DICOM: Compose Sheet=Off, BFS Print Support=Off n DICOM film: Magnif.=Cubic, Medium=Blue Film, Smoothing=Normal n DICOM film: Config Info=CS435\CN0\PD1.2, Border=Black, MaxDensity=300 n DICOM media: 14INx17IN, 14INx14IN, 11INx14IN, 8INx10IN n Layouts: 1,1; 1,2; 2,2; 2,3; 3,3; 3,4; 3,5; 4,4; 4,5 n Image: Min.Bitmap Size=256, Bit Depth=8, Orig.Size=Off, Color=Monochrome MIM200 Setup: n on Configure, Network: n Computer Name=eg Kodak1120, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, KELP 1120, Set:
n General: Log.Name=KELP1120, Database Name=KELP 1120 n General: Model=KELP 1120, Memory=20, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4096x5132, 5034, (Blue) n Media Info: Media=35x35cm, 4096x4108, 4010, (Blue) n Media Info: Media=11x14in, 4096x3232, 3134, (Blue) n Media Info: Media=8x10in, 2304x2900, 2802, (Blue) n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Repl=On,Cubic Spline=On
Kodak MIM 200
DICOM Network
Fiber Cable
Kodak 1120 cameraKodak MedViewWorkstation
Kodak workstation MedView with LASER IMAGER Products
Author: [email protected], Edition: May ´05 15
n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=3, Min Vert Sep=0 n Formatting: Trim Width Enabled=0, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.5 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=2.8 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7
n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape= 3 ie 435 (Always=Y), Contrast (wet)=0 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Minify/Scale=On, Crop=Off, Text Box Relocation=None n Print Priority=Normal (Always=N), Border=Black (Always=N) n Interpolation=Cubic, Border Dmax=3.99 n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off
1120 Setup: n Optical Interface board will automatic configure into 1120, no setup needed
Kodak workstation MedView with LASER IMAGER Products
Author: [email protected], Edition: May ´05 16
Kodak MedView via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /
Kodak DryView 8200 LASER IMAGER
Requirements: MedView v2.1 Requirements: MIM200 v6.1, DV8200 v3.5 Note: This setup is basically also valid for 25 PS computer Note: Image Data not lutted by MedView, lutted by Camera MedView Setup: n on Print->Destinations->Add Menu: n General: Class=DICOM Printer, Name=DryView n DICOM: AE Title=8200, Host Name=IP-Address of MIM200 n DICOM: Port=5040, Destination=Processor, Enable Print Job Events=Off n DICOM: Compose Sheet=Off, BFS Print Support=Off n DICOM film: Magnif.=Cubic, Medium=Blue Film, Smoothing=2 n DICOM film: Config Info= LUT=0,9, Border=Black, MaxDensity=300 n DICOM media: 14INx17IN, 14INx14IN, 11INx14IN n Layouts: 1,1; 1,2; 2,2; 2,3; 3,3; 3,4; 3,5; 4,4; 4,5 n Image: Min.Bitmap Size=256, Bit Depth=8, Orig.Size=Off, Color=Monochrome MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8200, Set:
n General: Log.Name=8200, IPAddr=100.100.100.40, n General: Database Name=8200, Model=8200, Memory=32 n Media Info: Media=35x43cm, 4361x5223, 5133, Blue n Media Info: Media=35x35cm, 4361x4247, 4157, Blue n Media Info: Media=11x14in, 3272x4361, 4271, Blue n Supported Item: Collation=On, Common Text=On, Tonescaling=On n Supported Item: Remote Image Deletion=On, Rotation=On
Kodak MIM 200
DICOM Network
CrossedNetwork Cable
Kodak DryView 8200
Kodak MedViewWorkstation
Kodak workstation MedView with LASER IMAGER Products
Author: [email protected], Edition: May ´05 17
n Interpolation: No Magnification=On, Bilin=On, Repl=On n Interpolation: Cubic Spline=On, Cubic Convolution 2=On n Format Types: Custom=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On n Formatting: Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20 n Formatting: Max Img Col=0, Max Img Row=0, n Formatting: Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify/Crop=On, Max Image Dmax=3.1 n SCU: Density Space= On, PLUT Service= On n SCU: Curve Shape Tonescaling=On, Perception LUT Tonescaling=On n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7
n at Keypad connected to MIM, press Menu, Service Menu, SCP Services: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT= Pmsb.w87 (Always=Y), Contrast (dry)=9 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n Smoothing Type=2 (Always=N), Image Polarity=Normal (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Minify/Scale=On, Crop=Off, Text Box Relocation=None n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N) n Negotiate Color Print=Off
8200 Setup on CONFIGURATION Menu: n on IMAGE QUALITY-> TFT FILES Menu: TFT=Ver693c0.w87 n on LOCAL PANEL Menu: Contrast=6, Density=3.00 n on DICOM / SCU Config.: AE=MIM, TFT=VER693C0, C=6, Smoothing=0 n on DICOM Menu: DICOM Config.: AE=NER_ANY, Port=1025
Kodak workstation MedView with LASER IMAGER Products
Author: [email protected], Edition: May ´05 18
Kodak MedView via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /
Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual, 8500 Plus, 8800/8500 Dual and HQ)
Requirements: MedView v2.1 Requirements: MIM200 v6.1, 8700 v1.34 Note: This setup is basically also valid for 25 PS computer Note: Image Data not lutted by MedView, lutted by Camera Note: This setup is basically also valid for 8800/8700 Dual, 8500 Plus,
8800/8500 Dual and HQ cameras by basically using the correspondent Model into MIM200 Destination
MedView Setup: n on Print->Destinations->Add Menu: n General: Class=DICOM Printer, Name=DryView n DICOM: AE Title=8700, Host Name=IP-Address of MIM200 n DICOM: Port=5040, Destination=Processor, Enable Print Job Events=Off n DICOM: Compose Sheet=Off, BFS Print Support=Off n DICOM film: Magnif.=Cubic, Medium=Blue Film, Smoothing=2 n DICOM film: Config Info= LUT=0,9, Border=Black, MaxDensity=300 n DICOM media: 14INx17IN (11INx14IN if 8500) n Layouts: 1,1; 1,2; 2,2; 2,3; 3,3; 3,4; 3,5; 4,4; 4,5 n Image: Min.Bitmap Size=256, Bit Depth=8, Orig.Size=Off, Color=Monochrome MIM200 Setup: n on Configure, Network:
n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, 8700, Set: n General: Log.Name=8700 n General: Database Name=8700, Model=8700, Memory=32 n Media Info: Media=35x43cm, 4096x5223, 5133, Blue n Output Params: Cmd=SuperSet,Baud=19200,Data=8,Stop=1,Parity=None
Kodak MedViewWorkstation
Kodak DryView 8700 PlusDICOM Network
3M8700 DryViewFiber Cable
Fiber Cable
Kodak MIM 200
Kodak workstation MedView with LASER IMAGER Products
Author: [email protected], Edition: May ´05 19
n Output Params: Pixel=12, Header/Line, Transfer=2000 KHz, Acq=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7
n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT= Pmsv3k.w87 (Always=Y), Contrast (dry)=9 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n Smoothing Type=2 (Always=N), Image Polarity=Normal (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Minify/Scale=On, Crop=Off, Text Box Relocation=None n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N) n Negotiate Color Print=Off
8700 Plus Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=12, Header/Line, Port=0, Parity=Disable Even, Timeout=60
Kodak workstation MedView with LASER IMAGER Products
Author: [email protected], Edition: May ´05 20
Kodak MedView via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /
Kodak DryView 8100 LASER IMAGER
Requirements: MedView v2.1 Requirements: MIM200 v6.1, 8100 v2.4.1 Note: This setup is basically also valid for 25 PS computer Note: Image Data not lutted by MedView, lutted by Camera MedView Setup: n on Print->Destinations->Add Menu: n General: Class=DICOM Printer, Name=DryView n DICOM: AE Title=8100, Host Name=IP-Address of MIM200 n DICOM: Port=5040, Destination=Processor, Enable Print Job Events=Off n DICOM: Compose Sheet=Off, BFS Print Support=Off n DICOM film: Magnif.=Cubic, Medium=Blue Film, Smoothing=2 n DICOM film: Config Info= LUT=0,9, Border=Black, MaxDensity=300 n DICOM media: 14INx17IN n Layouts: 1,1; 1,2; 2,2; 2,3; 3,3; 3,4; 3,5; 4,4; 4,5 n Image: Min.Bitmap Size=256, Bit Depth=8, Orig.Size=Off, Color=Monochrome MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8100, Set:
n General: Log.Name=8100 n General: Database Name=8100, Model=8100, Memory=32 n Media Info: Media=35x43cm, 4096x5223, 5133, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=12, Header/Line, Transfer=1000 KHz, Acquire=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On
Kodak DryView 8100
DICOM Network
COPCIL BoardCopper Cable Control 9-pin
Data 37-pin
RS4229-pole Plug
Kodak MIM 200
Kodak MedViewWorkstation
Kodak workstation MedView with LASER IMAGER Products
Author: [email protected], Edition: May ´05 21
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7
n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT= Pmsb.w87 (Always=Y), Contrast (dry)=9 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n Smoothing Type=2 (Always=N), Image Polarity=Normal (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Minify/Scale=On, Crop=Off, Text Box Relocation=None n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N) n Negotiate Color Print=Off
8100 Setup on CONFIGURATION Menu: n on SIB board (ie external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=90, P1,…,P6=0
n on IMAGE QLTY-> Mag Scaling=Off, Pixel Correct=Off, 952 Override=Off n on IMAGE QUALITY-> TFT FILES Menu: TFT=Ver693c0.w87 n on LOCAL PANEL Menu: Contrast=6, Density=3.00 n on SYSTEM Menu: Acquire=Digital, Max.Img.Columns=4361 n on DIGITAL Menu: Pixel Depth=12, Header/Line, Parity=Even
Kodak workstation MedView with LASER IMAGER Products
Author: [email protected], Edition: May ´05 22
Kodak MedView via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /
Kodak DryView 8300 LASER IMAGER
Requirements: MedView v2.1 Requirements: MIM200 v6.1, 8300 v4.9.1, 8300 LUT v3.0.3B Note: This setup is basically also valid for 25 PS computer Note: Image Data not lutted by MedView, lutted by Camera MedView Setup: n on Print->Destinations->Add Menu: n General: Class=DICOM Printer, Name=DryView n DICOM: AE Title=8300, Host Name=IP-Address of MIM200 n DICOM: Port=5040, Destination=Processor, Enable Print Job Events=Off n DICOM: Compose Sheet=Off, BFS Print Support=Off n DICOM film: Magnif.=Cubic, Medium=Blue Film, Smoothing=2 n DICOM film: Config Info= LUT=0,10, Border=Black, MaxDensity=300 n DICOM media: 8INx10IN n Layouts: 1,1; 1,2; 2,2; 2,3 n Image: Min.Bitmap Size=256, Bit Depth=8, Orig.Size=Off, Color=Monochrome MIM200 Setup: n on Configure, Network:
n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, 8300, Set: n General: Log.Name=8300 n General: Database Name=8300, Model=8300, Memory=32 n Media Info: Media=8x10in, 2256x2676, 2596, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=8, Header/Line, Transfer=2000 KHz, Acquire=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symm.=On, SuperSlide=On
Kodak DryView 8300
DICOM Network
Control 9 pin
Data 37 pin
COPCIL board Copper Cable
Kodak MIM 200
Kodak MedViewWorkstation
Kodak workstation MedView with LASER IMAGER Products
Author: [email protected], Edition: May ´05 23
n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=11.9048 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3 n M952 Usage: Min H/V Mag=1, Max H/V Mag=16, Min Dmax 952=1.5
n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT= u1_109s.w8u (Always=Y), Contrast (dry)=10 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n Smoothing Type=2 (Always=N), Image Polarity=Normal (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Minify/Scale=On, Crop=Off, Text Box Relocation=None n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n Film Base=Blue Film (Always=N), Film Size=8INx10IN (Always=N) n Negotiate Color Print=Off
8300 Setup: n on Operator Menu set: D=16, C=6, Sharp/Smooth=0 ie Auto n on Operator Menu set: Film Layout: 1 on 1=Portrait n on Service Menu set: Ratio=1.00, Serial=1200,8,1,Even,Comma,3M, Memory=16 n on Service Menu set: Digital Interface: Parity=Even, Modality Group=1
Kodak workstation MedView with LASER IMAGER Products
Author: [email protected], Edition: May ´05 24
Kodak MedView via DICOM with Kodak DryView 8900 LASER IMAGER
Requirements: MedView v2.1 Requirements: 8900 rev.E ie rel.2.11 (ie DRE v2.11, MIM v5.6.b5, MCS v2.10) Note: Image Data not lutted by MedView, lutted by Camera MedView Setup: n on Print->Destinations->Add Menu: n General: Class=DICOM Printer, Name=DryView n DICOM: AE Title=8900, Host Name=IP-Address of 8900 n DICOM: Port=5040, Destination=Processor, Enable Print Job Events=Off n DICOM: Compose Sheet=Off, BFS Print Support=Off n DICOM film: Magnif.=Cubic, Medium=Blue Film, Smoothing=2 n DICOM film: Config Info= LUT=0,9, Border=Black, MaxDensity=300 n DICOM media: 14INx17IN, 14INx14IN, 11INx14IN, 10INx12IN, 8INx10IN n Layouts: 1,1; 1,2; 2,2; 2,3; 3,3; 3,4; 3,5; 4,4; 4,5 n Image: Min.Bitmap Size=256, Bit Depth=8, Orig.Size=Off, Color=Monochrome 8900 Setup: n on Configuration, System, Network: n Host Name=DV8900, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configuration, DICOM SCP, Communications:
n Port=5040, Association Limit=12, Source Name=DICOM n on Configuration, Destination:
n General: Log.Name=8900 n Media Types: Media=35x43cm, 9100x11037, 10781, Any n Media Types: Media=35x35cm,9100x9087, 8831, Any n Media Types: Media=11x14in, 7137x9100, 8844, Any n Media Types: Media=10x12in, 6490x7767, 7511, Any n Media Types: Media=8x10in, 5167x6490, 6234, Any n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On n Formatting: DICOM Annotation Box=On, Req.Image Size=On n Formatting: Req.Size Scale=On, Req.Size Mix Page=On n Formatting: Req.Size Mix Row=On, Trim=On,
DICOM Network
Kodak DryView 8900
Kodak MedViewWorkstation
Kodak workstation MedView with LASER IMAGER Products
Author: [email protected], Edition: May ´05 25
n Formatting: True Landscape=On, Rotation=On n Formatting: Minify/Crop=On, Tonescaling on Image Basis=On n Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0 n Formatting: Max Img Rows=0, Pixel Pitch=25.5910, Min Horiz Sep=4 n Formatting: Min Vert Sep=4, Trim Width Enabled=4 n Formatting: Trim Width Disabled=0, Maximum DMAX=3.30
n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify: n Negotiate Presentation LUT=No, Negotiate Color Print=No n TFT= Pmsv3k.w87 (Always=N), Contrast=9 (Always=N) n Smoothing Type=2 (Always=N), Image Polarity (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=No (Always=Y), Warnings=Yes n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n 2mm Border=Yes, Film Clip Border=No, Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Sorter Bin=Bin1 (Always=N) n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No n Modality ID=No, Annotation Override=No, Density Patch=No n Image Resizing=Minify/Scale (Always=N), n Text Box Location=None, Source ID=ws
Kodak workstation MedView with LASER IMAGER Products
Author: [email protected], Edition: May ´05 26
Kodak MedView via DICOM with Kodak DryView 8150 LASER IMAGER
Requirements: MedView v2.1 Requirements: 8150 v0.08.b6 (DRE=DV8150_DRE_0.08.b6, MIM=MIM_v5.7.b6) Note: Image Data not lutted by MedView, lutted by Camera MedView Setup: n on Print->Destinations->Add Menu: n General: Class=DICOM Printer, Name=DryView n DICOM: AE Title=DV8150, Host Name=IP-Address of 8150 n DICOM: Port=5040, Destination=Processor, Enable Print Job Events=Off n DICOM: Compose Sheet=Off, BFS Print Support=Off n DICOM film: Magnif.=Cubic, Medium=Blue Film, Smoothing=2 n DICOM film: Config Info= LUT=0,9, Border=Black, MaxDensity=300 n DICOM media: 14INx17IN, 14INx14IN, 11INx14IN, 10INx12IN, 8INx10IN n Layouts: 1,1; 1,2; 2,2; 2,3; 3,3; 3,4; 3,5; 4,4; 4,5 n Image: Min.Bitmap Size=256, Bit Depth=8, Orig.Size=Off, Color=Monochrome 8150 Setup: n on Configuration, System, Network: n Host Name=DV8150DRE, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configuration, DICOM SCP, Communications:
n Port=5040, Association Limit=12, Source Name=DICOM n on Configuration, Destination:
n AE Title: Log.Name=DV8150 n Media Types: Media=35x43cm, 4438x5390, 5262, Any n Media Types: Media=35x35cm, 4438x4414,4286, Any n Media Types: Media=11x14in, 3440x4438, 4310, Any n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On n Formatting: DICOM Annotation Box=On, Req.Image Size=On n Formatting: Req.Size Scale=On, Req.Size Mix Page=On n Formatting: Req.Size Mix Row=On, Trim=On,
DICOM Network
Kodak DryView 8150
Kodak MedViewWorkstation
Kodak workstation MedView with LASER IMAGER Products
Author: [email protected], Edition: May ´05 27
n Formatting: True Landscape=On, Rotation=On n Formatting: Minify/Crop=On, Tonescaling on Image Basis=On n Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0 n Formatting: Max Img Rows=0, Pixel Pitch=12.8000, Min Horiz Sep=2 n Formatting: Min Vert Sep=2, Trim Width Enabled=2 n Formatting: Trim Width Disabled=0, Maximum DMAX=3.10
n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify: n Negotiate Presentation LUT=No, Negotiate Color Print=No, n TFT Set Name=Pmsb.w87 (Always=Y) n Contrast=9 (Always=N), Smoothing Type=2 (Always=N) n Dmin=0.00 (Always=N), Dmax=3.00 (Always=N) n Image Polarity=Normal (Always=N) n NeventReports=No (Always=Y), Warnings=Yes n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n 2mm Border=Yes, Film Clip Border=No, n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N) n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No, n Modality ID=No, Annotation Override=No, Density Patch=No n Image Resizing=Minify/Scale (Always=N), n Text Box Location=None, Source ID=ws
Kodak workstation MedView with LASER IMAGER Products
Author: [email protected], Edition: May ´05 28
Kodak MedView via DICOM with Kodak Color Medical Imager 1000
Requirements: MedView v2.1 Requirements: CMI-1000 v1.0.b8 (DRE=v1.0.b8, MIMCore=v2.0.b3) Note: Image Data not lutted by MedView, lutted by Camera MedView Setup: n on Print->Destinations->Add Menu: n General: Class=DICOM Printer, Name=CMI1000 n DICOM: AE Title=CMI1000, Host Name=IP-Address of CMI1000 n DICOM: Port=5040, Destination=Processor, Enable Print Job Events=Off n DICOM: Compose Sheet=Off, BFS Print Support=Off n DICOM film: Magnif.=Cubic, Medium=Blue Film, Smoothing=2 n DICOM film: Config Info= LUT=0,9, Border=Black, MaxDensity=300 n DICOM media: 8INx10IN n Layouts: 1,1; 1,2; 2,2; 2,3 n Image: Min.Bitmap Size=256, Bit Depth=8, Orig.Size=Off, Color=Color CMI-1000 Setup: at Local Panel, under Media, set A4 or Letter ie what inside Paper Tray (CMI-1000 sw considers only this field and uses it as A4 or Letter (Always=Y): at Local Panel, under Menu, Imager Setup: n Network Setup: n IPAddr=accordingly, Subnet Mask=accordingly, Gateway=accordingly n under More Settings: DICOM Port=5040 n Edit Host Name/AE Title=CMI1000 n Modality (SCU) Config (or after modality recognition): n Select Modality=accordingly, Modality Config.Assistant=Yes, Reset Config=No n Note: Color IQ settings used when images sent with Color DICOM SOP n under Image Quality, Color Image Quality: (no need to adjust, leave defaults)
n Match Monitor Colors=default ie sRGB Color Space Profile.icm n Adjust Color Tones=default ie Default_Contrast_100.icm
n Note: Grayscale IQ settings used when images sent with Grayscale DICOM SOP: n under Image Quality, Grayscale Image Quality:
n Contrast=9 (Always=Y), TFT Set (From list)=Pmsv3k.w87 (Always=Y) n Wet Contrast=0 (Always=N), Curve Shape=429 (Always=N)
DICOM Network
Kodak MedViewWorkstation
Kodak CMI 1000
Kodak workstation MedView with LASER IMAGER Products
Author: [email protected], Edition: May ´05 29
n under More Quality Settings: n Tonescaling=Presentation LUT (Always=N), n Image Dmax=220 (Always=N), Image Dmin=10 (Always=N) n Smoothing=2 (Always=Y), Polarity=Positive (Always=N) n Interpolation=CUBIC (Always=N), Trim=No (Always=N) n Page Orientation=PORTRAIT (Always=N), Negotiate PLUT=No
n under Modality Defaults: n Media Size=8.5x11 (Always=N), don’t care, this field plays no role n Image Resizing=Minify (Always=N), n Priority=Normal (Always=N), NeventReports=No (Always=Y), n Warnings=Yes, Color=Yes n (set Color=No when only b/w images are printed and set it to be sure n to apply to the b/w images the Greyscale Image Quality settings) n Page Annotation: n Hosp.Name=No, Modality ID=No, Page Nbr=No, Date=No, Time= No
n Save Changes and Exit
Setup for Kodak workstation QCW for CR 400 with LASER IMAGER Products
Author: [email protected], Edition: May ´05 1
TENTATIVE Setup for Kodak workstation QCW for CR 400 with LASER IMAGERS Connection via DICOM: n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /
Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual and HQ)...... 2 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /
Kodak DryView 8500 LASER IMAGER / Plus (see also 8800/8500 Dual).................... 3 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /
Kodak DryView 8100 LASER IMAGER......................................................................... 4 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /
Kodak DryView 8300 LASER IMAGER......................................................................... 6 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /
Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual and HQ)(1) .. 7 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /
Kodak DryView 8500 LASER IMAGER / Plus (see also 8800/8500 Dual) (1)............... 9 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /
Kodak DryView 8100 LASER IMAGER(1)..................................................................... 11 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /
Kodak DryView 8300 LASER IMAGER(1)..................................................................... 13 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /
Kodak DryView 8200 LASER IMAGER(1)..................................................................... 15 n Kodak DryView 8900 LASER IMAGER......................................................................... 17 n Kodak DryView 8150 LASER IMAGER......................................................................... 19 n Kodak Color Medical Imager 1000 ................................................................................. 21
1 setup valid also for Kodak PACS LINK 25 PRINT SERVER.
Setup for Kodak workstation QCW for CR 400 with LASER IMAGER Products
Author: [email protected], Edition: May ´05 2
Kodak QCW via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /
Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual and HQ)
Kodak DryView 8700 PlusKodak 9410 PACS Link
DICOM Network
3M8700 DryView
Fiber Cable
Fiber Cable
Kodak QCW Workstation
Requirements: QCW v5.0, 9410 v1.6, 8700 v1.34
Note: This setup is basically also valid for 8800/8700 Dual and HQ cameras by basically using the correspondent Model into 9410 Local Printers
QCW Setup: Third Party DICOM Device/Printer/3M/Imation: Configuration: LUT=0,2 Smoothing: 5 Annotation: COMBINED Film Dest: PROCESSOR Orientation:PORTRAIT Scaling: PARTIAL Memory: 0
9410 Setup: n on Device Setup, LOCAL PRINTERS:
n Printer=8700, Model=8700, Output=Fiber n Baud=19200, Parity=None, Data=8, Stop=1, Command Set=Superset n Pixel=12, Header/Line, Timeout=60, Transfer Rate=2 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=5, Max.Density=300, Contrast=6, Border Density=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87
n on Device Setup, SCP PRINTERS, Current Providers: n Printer=8700, AE Title=9410, Port=1024, Max Associations=5
n on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle=accordingly, SCU IPAddr=accordingly, SCP=8700 n Copies=1, Contrast Table=2, TFT/ULUT=Wrkstn2a.w87 n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=5 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0
8700 Plus Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=12, Header/Line, Parity=Enable Even, Port=0, Timeout=60
Setup for Kodak workstation QCW for CR 400 with LASER IMAGER Products
Author: [email protected], Edition: May ´05 3
Kodak QCW via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /
Kodak DryView 8500 LASER IMAGER / Plus (see also 8800/8500 Dual)
Kodak DryView 8500 PlusKodak 9410 PACS Link
DICOM Network
3M8700 DryView
Fiber Cable
Fiber Cable
Kodak QCW Workstation
Requirements: QCW v5.0, 9410 v1.6, 8500 v1.34
Note: This setup is basically also valid for 8800/8500 Dual camera by basically using the correspondent Model into 9410 Local Printers
QCW Setup: Third Party DICOM Device/Printer/3M/Imation: Configuration: LUT=0,2 Smoothing: 5 Annotation: COMBINED Film Dest: PROCESSOR Orientation:PORTRAIT Scaling: PARTIAL Memory: 0
9410 Setup: n on Device Setup, LOCAL PRINTERS:
n Printer=8500, Model=8500, Output=Fiber n Baud=19200, Parity=None, Data=8, Stop=1, Command Set=Superset n Pixel=12, Header/Line, Timeout=60, Transfer Rate=2 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=5, Max.Density=300, Contrast=6, Border Density=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87
n on Device Setup, SCP PRINTERS, Current Providers: n Printer=8500, AE Title=9410, Port=1024, Max Associations=5
n on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle=accordingly, SCU IPAddr=accordingly, SCP=8500 n Copies=1, Contrast Table=2, TFT/ULUT=Wrkstn2a.w87 n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=5 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0
8500 Plus Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=12, Header/Line, Parity=Enable Even, Port=0, Timeout=60
Setup for Kodak workstation QCW for CR 400 with LASER IMAGER Products
Author: [email protected], Edition: May ´05 4
Kodak QCW via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /
Kodak DryView 8100 LASER IMAGER
Kodak DryView 8100Kodak 9410 PACS Link
DICOM Network
COPCIL BoardCopper Cable Control 9-pin
Data 37-pin
RS4229-pole Plug
Kodak QCW Workstation
Requirements: QCW v5.0, 9410 v1.6, 8100 v2.4.1 QCW Setup: Third Party DICOM Device/Printer/3M/Imation:
Configuration: LUT=0,2 Smoothing: 5 Annotation: COMBINED Film Dest: PROCESSOR Orientation:PORTRAIT Scaling: PARTIAL Memory: 0
9410 Setup:
on Device Setup, LOCAL PRINTERS: n Printer=8100, Model=8100 4096 pxls/line, Output=Copper n Baud=1200, Parity=Even, Data=8, Stop=1, Command Set=952 n Pixel=12, Header/Line, Timeout=60, Transfer Rate=1 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=5, Max.Density=300, Contrast=6, Border Density=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87
on Device Setup, SCP PRINTERS, Current Providers: n Printer=8100, AE Title=9410, Port=1024, Max Associations=5
on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle=accordingly, SCU IPAddr=accordingly n SCP=8100, Copies=1, Contrast Table=2, TFT/ULUT=Wrkstn2a.w87 n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=5 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0
Setup for Kodak workstation QCW for CR 400 with LASER IMAGER Products
Author: [email protected], Edition: May ´05 5
8100 Setup on CONFIGURATION Menu: n on SIB board (i.e., external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=60, P1,…,P6=0
n on IMAGE QLTY-> Mag Scaling=Off, Pixel Correct=Off, 952 Override=Off n on IMAGE QUALITY-> TFT FILES: TFT=ver693c0.w87 n on LOCAL PANEL: Contrast=6, Density=3.00 n on SYSTEM Menu: Acquire=Digital, Max.Img.Columns=4361 n on DIGITAL Menu: Pixel Depth=12, Header/Line, Parity=Even
Setup for Kodak workstation QCW for CR 400 with LASER IMAGER Products
Author: [email protected], Edition: May ´05 6
Kodak QCW via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /
Kodak DryView 8300 LASER IMAGER
Kodak DryView 8300
Kodak 9410 PACS Link
DICOM Network
Control 9 pin
Data 37 pin
COPCIL board Copper Cable
Kodak QCW Workstation
Requirements: QCW v5.0, 9410 v1.6, 8300 v4.9.1, 8300 LUT v3.0.3B QCW Setup: Third Party DICOM Device/Printer/3M/Imation:
Configuration: LUT=0,1 Smoothing: 3 Annotation: COMBINED Film Dest: PROCESSOR Orientation:PORTRAIT Scaling: PARTIAL Memory: 0
9410 Setup: n on Device Setup, LOCAL PRINTERS:
n Printer=8300, Model=8300 Copper, Output=Copper n Command Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Pixel=8, Header/Line, Timeout=60, Transfer Rate=1 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=0, Max.Density=300, Contrast=6, Border Density=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT= upmsv3k.w8u
n on Device Setup, SCP PRINTERS, Current Providers: n Printer=8300, AE Title=9410, Port=1024, Max Associations=5 n on Device Setup, SCP PRINTERS, Registered Users:
n SCU AETitle=accordingly, SCU IPAddr=accordingly n SCP=8300, Copies=1, Contrast Table=1, TFT/ULUT=wrkstn83a.w8u n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=3 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0
8300 Setup: n on Operator Menu set: D=16, C=6, Sharp/Smooth=0 i.e., Auto n on Operator Menu set: Film Layout: 1 on 1=Portrait n on Service Menu set: Ratio=1.00, Serial=1200,8,1,Even,Comma,3M, Memory=16 n on Service Menu set: Digital Interface: Parity=Even, Modality Group=1
Setup for Kodak workstation QCW for CR 400 with LASER IMAGER Products
Author: [email protected], Edition: May ´05 7
Kodak QCW via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /
Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual and HQ)
Kodak DryView 8700 PlusKodak MIM 200
DICOM Network
3M8700 DryView
Fiber Cable
Fiber Cable
Kodak QCW Workstation
Requirements: QCW v5.0, MIM200 v6.1, 8700 v1.34 Note: This setup is basically also valid for 25 PS computer Note: This setup is basically also valid for 8800/8700 Dual and HQ cameras
by basically using the correspondent Model into MIM200 Destination QCW Setup: Third Party DICOM Device/Printer/3M/Imation:
Configuration: LUT=0,2 Smoothing: 5 Annotation: COMBINED Film Dest: PROCESSOR Orientation:PORTRAIT Scaling: PARTIAL Memory: 0
MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8700, Set:
n General: Log.Name=8700 n General: Database Name=8700, Model=8700, Memory=32 n Media Info: Media=35x43cm, 4096x5223, 5133, Blue n Output Params: Cmd=SuperSet,Baud=19200,Data=8,Stop=1,Parity=None n Output Params: Pixel=12, Header/Line, Transfer=2000 KHz, Acq=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On
Setup for Kodak workstation QCW for CR 400 with LASER IMAGER Products
Author: [email protected], Edition: May ´05 8
n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7
n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=Wrkstn2a.w87 (Always=Y), Contrast (dry)=2 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=5 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off
8700 Plus Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=12, Header/Line, Parity=Enable Even, Port=0, Timeout=60
Setup for Kodak workstation QCW for CR 400 with LASER IMAGER Products
Author: [email protected], Edition: May ´05 9
Kodak QCW via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /
Kodak DryView 8500 LASER IMAGER / Plus (see also 8800/8500 Dual)
Kodak DryView 8500 PlusKodak MIM 200
DICOM Network
3M8700 DryView
Fiber Cable
Fiber Cable
Kodak QCW Workstation
Requirements: QCW v5.0, MIM200 v6.1, 8500 v1.34 Note: This setup is basically also valid for 25 PS computer Note: This setup is basically also valid for 8800/8500 Dual camera
by basically using the correspondent Model into MIM200 Destination QCW Setup: Third Party DICOM Device/Printer/3M/Imation:
Configuration: LUT=0,2 Smoothing: 5 Annotation: COMBINED Film Dest: PROCESSOR Orientation:PORTRAIT Scaling: PARTIAL Memory: 0
MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8500, Set:
n General: Log.Name=8500 n General: Database Name=8500, Model=8500, Memory=32 n Media Info: Media=11x14in, 3388x4283, 4193, Blue n Output Params: Cmd=SuperSet,Baud=19200,Data=8,Stop=1,Parity=None n Output Params: Pixel=12, Header/Line, Transfer=2000 KHz, Acq=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On
Setup for Kodak workstation QCW for CR 400 with LASER IMAGER Products
Author: [email protected], Edition: May ´05 10
n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7
n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=Wrkstn2a.w87 (Always=Y), Contrast (dry)=2 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=5 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=11INx14IN (Always=N), Negotiate Color Print=Off
8500 Plus Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=12, Header/Line, Parity=Enable Even, Port=0, Timeout=60
Setup for Kodak workstation QCW for CR 400 with LASER IMAGER Products
Author: [email protected], Edition: May ´05 11
Kodak QCW via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /
Kodak DryView 8100 LASER IMAGER
Kodak DryView 8100Kodak MIM 200
DICOM Network
COPCIL BoardCopper Cable Control 9-pin
Data 37-pin
RS4229-pole Plug
Kodak QCW Workstation
Requirements: QCW v5.0, MIM200 v6.1, 8100 v2.4.1 Note: This setup is basically also valid for 25 PS computer QCW Setup: Third Party DICOM Device/Printer/3M/Imation:
Configuration: LUT=0,2 Smoothing: 5 Annotation: COMBINED Film Dest: PROCESSOR Orientation:PORTRAIT Scaling: PARTIAL Memory: 0
MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8100, Set:
n General: Log.Name=8100 n General: Database Name=8100, Model=8100, Memory=32 n Media Info: Media=35x43cm, 4096x5223, 5133, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=12, Header/Line, Transfer=1000 KHz, Acquire=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0
Setup for Kodak workstation QCW for CR 400 with LASER IMAGER Products
Author: [email protected], Edition: May ´05 12
n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7
n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=Wrkstn2a.w87 (Always=Y), Contrast (dry)=2 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=5 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off
8100 Setup on CONFIGURATION Menu: n on SIB board (i.e., external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=90, P1,…,P6=0
n on IMAGE QLTY-> Mag Scaling=Off, Pixel Correct=Off, 952 Override=Off n on IMAGE QUALITY-> TFT FILES Menu: TFT=Ver693c0.w87 n on LOCAL PANEL Menu: Contrast=6, Density=3.00 n on SYSTEM Menu: Acquire=Digital, Max.Img.Columns=4361 n on DIGITAL Menu: Pixel Depth=12, Header/Line, Parity=Even
Setup for Kodak workstation QCW for CR 400 with LASER IMAGER Products
Author: [email protected], Edition: May ´05 13
Kodak QCW via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /
Kodak DryView 8300 LASER IMAGER
Kodak DryView 8300Kodak MIM 200
DICOM Network
Control 9 pin
Data 37 pin
COPCIL board Copper Cable
Kodak QCW Workstation
Requirements: QCW v5.0, MIM200 v6.1, 8300 v4.9.1, 8300 LUT v3.0.3B Note: This setup is basically also valid for 25 PS computer QCW Setup: Third Party DICOM Device/Printer/3M/Imation:
Configuration: LUT=0,1 Smoothing: 3 Annotation: COMBINED Film Dest: PROCESSOR Orientation:PORTRAIT Scaling: PARTIAL Memory: 0
MIM200 Setup: n on Configure, Network:
n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly
n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9
n on Configure, Destination, Add, Print, Direct, Qualified, 8300, Set: n General: Log.Name=8300 n General: Database Name=8300, Model=8300, Memory=32 n Media Info: Media=8x10in, 2256x2676, 2596, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=8, Header/Line, Transfer=2000 KHz, Acquire=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On, SuperSlide=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0
Setup for Kodak workstation QCW for CR 400 with LASER IMAGER Products
Author: [email protected], Edition: May ´05 14
n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=11.811 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3 n M952 Usage: Min H/V Mag=1, Max H/V Mag=16, Min Dmax 952=1.5
n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=wkstn83a.w8u (Always=Y), Contrast (dry)=1 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=3 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=8INx10IN (Always=N), Negotiate Color Print=Off
8300 Setup: n on Operator Menu set: D=16, C=6, Sharp/Smooth=0 i.e., Auto n on Operator Menu set: Film Layout: 1 on 1=Portrait n on Service Menu set: Ratio=1.00, Serial=1200,8,1,Even,Comma,3M, Memory=16 n on Service Menu set: Digital Interface: Parity=Even, Modality Group=1
Setup for Kodak workstation QCW for CR 400 with LASER IMAGER Products
Author: [email protected], Edition: May ´05 15
Kodak QCW via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /
Kodak DryView 8200 LASER IMAGER
Kodak MIM 200
DICOM Network
CrossedNetwork Cable
Kodak DryView 8200
Kodak QCW Workstation
Requirements: QCW v5.0, MIM200 v6.1, 8200 v3.5 Note: This setup is basically also valid for 25 PS computer QCW Setup: Third Party DICOM Device/Printer/3M/Imation:
Configuration: LUT=0,2 Smoothing: 5 Annotation: COMBINED Film Dest: PROCESSOR Orientation:PORTRAIT Scaling: PARTIAL Memory: 0
MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add:
n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8200, Set:
n General: Log.Name=8200, IPAddr=100.100.100.40, n General: Database Name=8200, Model=8200, Memory=32 n Media Info: Media=35x43cm, 4361x5223, 5133, Any (Blue,Clear) n Media Info: Media=35x35cm, 4361x4247, 4157, Any (Blue,Clear) n Media Info: Media=11x14in, 3272x4361, 4271, Any (Blue,Clear) n Supported Item: Collation=On, Common Text=On, Tonescaling=On n Supported Item: Remote Image Deletion=On, Rotation=On n Interpolation: No Magnification=On, Bilin=On, Repl=On n Interpolation: Cubic Spline=On, Cubic Convolution 2=On n Format Types: Custom=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On
Setup for Kodak workstation QCW for CR 400 with LASER IMAGER Products
Author: [email protected], Edition: May ´05 16
n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n SCU: Density Space=On, Variable Border=On, PLUT Service=On n SCU: Curve Shape Tonescaling=On, Perception LUT Tonescaling=On n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7
n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=Wrkstn2a.w87 (Always=Y), Contrast (dry)=2 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=5 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off
8200 Setup on CONFIGURATION Menu: n on IMAGE QUALITY-> TFT FILES Menu: TFT=Ver693c0.w87 n on LOCAL PANEL Menu: Contrast=6, Density=3.00 n on DICOM Menu: SCU Config.: AE=MIM, TFT=VER693C0, C=6, Smoothing=0 n on DICOM Menu: DICOM Config.: AE=NER_ANY, Port=1025
Setup for Kodak workstation QCW for CR 400 with LASER IMAGER Products
Author: [email protected], Edition: May ´05 17
Kodak QCW via DICOM with Kodak DryView 8900 LASER IMAGER
Requirements: QCW v. 5.0 Requirements: 8900 rev.E ie rel.2.11 (ie DRE v2.11, MIM v5.6.b5, MCS v2.10) QCW Setup: Third Party DICOM Device/Printer/3M/Imation:
Configuration: LUT=0,2 Smoothing: 5 Annotation: COMBINED Film Dest: PROCESSOR Orientation:PORTRAIT Scaling: PARTIAL Memory: 0
8900 Setup: n on Configuration, System, Network: n Host Name=DV8900, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configuration, DICOM SCP, Communications:
n Port=5040, Association Limit=12, Source Name=DICOM n on Configuration, Destination:
n General: Log.Name=8900 n Media Types: Media=35x43cm, 9100x11037, 10781, Any n Media Types: Media=35x35cm,9100x9087, 8831, Any n Media Types: Media=11x14in, 7137x9100, 8844, Any n Media Types: Media=10x12in, 6490x7767, 7511, Any n Media Types: Media=8x10in, 5167x6490, 6234, Any n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On n Formatting: DICOM Annotation Box=On, Req.Image Size=On n Formatting: Req.Size Scale=On, Req.Size Mix Page=On n Formatting: Req.Size Mix Row=On, Trim=On, n Formatting: True Landscape=On, Rotation=On n Formatting: Minify/Crop=On, Tonescaling on Image Basis=On n Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0 n Formatting: Max Img Rows=0, Pixel Pitch=25.5910, Min Horiz Sep=4 n Formatting: Min Vert Sep=4, Trim Width Enabled=4 n Formatting: Trim Width Disabled=0, Maximum DMAX=3.30
n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify:
Kodak QCW Workstation
DICOM Network
Kodak DryView 8900
Setup for Kodak workstation QCW for CR 400 with LASER IMAGER Products
Author: [email protected], Edition: May ´05 18
n Negotiate Presentation LUT=No, Negotiate Color Print=No n TFT= Wrkstn2a.w87 (Always=N), Contrast=2 (Always=N) n Smoothing Type=5 (Always=N), Image Polarity (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=No (Always=Y), Warnings=Yes n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n 2mm Border=Yes, Film Clip Border=No, Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Sorter Bin=Bin1 (Always=N) n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No n Modality ID=No, Annotation Override=No, Density Patch=No n Image Resizing=Minify/Scale (Always=N), n Text Box Location=None, Source ID=qcw
Setup for Kodak workstation QCW for CR 400 with LASER IMAGER Products
Author: [email protected], Edition: May ´05 19
Kodak QCW via DICOM with Kodak DryView 8150 LASER IMAGER
Requirements: QCW v. 5.0 Requirements: 8150 v0.08.b6 (DRE=DV8150_DRE_0.08.b6, MIM=MIM_v5.7.b6) QCW Setup: Third Party DICOM Device/Printer/3M/Imation:
Configuration: LUT=0,1 Smoothing: 5 Annotation: COMBINED Film Dest: PROCESSOR Orientation:PORTRAIT Scaling: PARTIAL Memory: 0
8150 Setup: n on Configuration, System, Network: n Host Name=DV8150DRE, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configuration, DICOM SCP, Communications:
n Port=5040, Association Limit=12, Source Name=DICOM n on Configuration, Destination:
n AE Title: Log.Name=DV8150 n Media Types: Media=35x43cm, 4438x5390, 5262, Any n Media Types: Media=35x35cm, 4438x4414,4286, Any n Media Types: Media=11x14in, 3440x4438, 4310, Any n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On n Formatting: DICOM Annotation Box=On, Req.Image Size=On n Formatting: Req.Size Scale=On, Req.Size Mix Page=On n Formatting: Req.Size Mix Row=On, Trim=On, n Formatting: True Landscape=On, Rotation=On n Formatting: Minify/Crop=On, Tonescaling on Image Basis=On n Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0 n Formatting: Max Img Rows=0, Pixel Pitch=12.8000, Min Horiz Sep=2 n Formatting: Min Vert Sep=2, Trim Width Enabled=2 n Formatting: Trim Width Disabled=0, Maximum DMAX=3.10
n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify: n Negotiate Presentation LUT=No, Negotiate Color Print=No,
Kodak QCW Workstation
DICOM Network
Kodak DryView 8150
Setup for Kodak workstation QCW for CR 400 with LASER IMAGER Products
Author: [email protected], Edition: May ´05 20
n TFT Set Name=Wrkstn2a.w87 (Always=Y) n Contrast=1 (Always=N), Smoothing Type=5 (Always=N) n Dmin=0.00 (Always=N), Dmax=3.00 (Always=N) n Image Polarity=Normal (Always=N) n NeventReports=No (Always=Y), Warnings=Yes n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n 2mm Border=Yes, Film Clip Border=No, n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N) n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No, n Modality ID=No, Annotation Override=No, Density Patch=No n Image Resizing=Minify/Scale (Always=N), n Text Box Location=None, Source ID=qcw
Setup for Kodak workstation QCW for CR 400 with LASER IMAGER Products
Author: [email protected], Edition: May ´05 21
Kodak QCW via DICOM with Kodak Color Medical Imager 1000
Requirements: QCW v. 5.0 Requirements: CMI-1000 v1.0.b8 (DRE=v1.0.b8, MIMCore=v2.0.b3) QCW Setup: Third Party DICOM Device/Printer/3M/Imation:
Configuration: LUT=0,1 Smoothing: 11 Annotation: COMBINED Film Dest: PROCESSOR Orientation:PORTRAIT Scaling: PARTIAL Memory: 0
CMI-1000 Setup: at Local Panel, under Media, set A4 or Letter ie what inside Paper Tray (CMI-1000 sw considers only this field and uses it as A4 or Letter (Always=Y): at Local Panel, under Menu, Imager Setup: n Network Setup: n IPAddr=accordingly, Subnet Mask=accordingly, Gateway=accordingly n under More Settings: DICOM Port=5040 n Edit Host Name/AE Title=CMI1000 n Modality (SCU) Config (or after modality recognition): n Select Modality=accordingly, Modality Config.Assistant=Yes, Reset Config=No n Note: Color IQ settings used when images sent with Color DICOM SOP n under Image Quality, Color Image Quality: (no need to adjust, leave defaults)
n Match Monitor Colors=default ie sRGB Color Space Profile.icm n Adjust Color Tones=default ie Default_Contrast_100.icm
n Note: Grayscale IQ settings used when images sent with Grayscale DICOM SOP: n under Image Quality, Grayscale Image Quality:
n Contrast=7 (Always=Y) n TFT Set (From list)=Wrkstn2a.w87 (Always=Y) n Wet Contrast=0 (Always=N), Curve Shape=429 (Always=N) n under More Quality Settings: n Tonescaling=Presentation LUT (Always=N), n Image Dmax=220 (Always=N), Image Dmin=10 (Always=N) n Smoothing=11 (Always=Y), Polarity=Positive (Always=N) n Interpolation=CUBIC (Always=N), Trim=No (Always=N) n Page Orientation=PORTRAIT (Always=N), Negotiate PLUT=No
n under Modality Defaults:
Kodak QCW Workstation
DICOM Network
Kodak CMI 1000
Setup for Kodak workstation QCW for CR 400 with LASER IMAGER Products
Author: [email protected], Edition: May ´05 22
n Media Size=8.5x11 (Always=N), don’t care, this field plays no role n Image Resizing=Minify (Always=N), n Priority=Normal (Always=N), NeventReports=No (Always=Y), n Warnings=Yes, Color=Yes n (set Color=No when only b/w images are printed and set it to be sure n to apply to the b/w images the Greyscale Image Quality settings) n Page Annotation: n Hosp.Name=No, Modality ID=No, Page Nbr=No, Date=No, Time= No
n Save Changes and Exit